CumulusNetworks-ifupdown2/man.rst/ifupdown-addons-interfaces.5.rst

==========================
ifupdown-addons-interfaces
==========================
---------------------------------------------------------
ifupdown2 addon modules interface configuration
---------------------------------------------------------
:Author: roopa@cumulusnetworks.com
:Date:   2013-09-25
:Copyright: Copyright 2013 Cumulus Networks, Inc.  All rights reserved.
:Version: 0.1
:Manual section: 5


DESCRIPTION
===========
    ifupdown2 addon modules add incremental functionality to
    core ifupdown2 tool.
           
    All installed addon modules are executed on every interface
    listed in the interfaces file. Addon modules are installed under
    /usr/share/ifupdownaddons. To see the list of active addon
    modules, see ifaddon(8).

    Addon modules add new attributes to the interfaces(5) file.
    Below is a list of attribute options provided by each module.
    These can be listed under each iface section in the interfaces(5)
    file.  


EXAMPLES
========
    Listed below are addon modules and their supported attributes.
    The attributes if applicable go under the iface section in the
    interfaces(5) file.

    **ethtool**: ethtool configuration module for interfaces


      **link-duplex**

        **help**: set link duplex


        **required**: False

        **default**: half

        **validvals**: half,full

        **example**:
            link-duplex full


      **link-autoneg**

        **help**: set autonegotiation


        **required**: False

        **default**: off

        **validvals**: on,off

        **example**:
            link-autoneg on


      **link-speed**

        **help**: set link speed


        **required**: False

        **example**:
            link-speed 1000



    **bridge**: Bridge configuration module. Supports both vlan aware 
    and non vlan aware bridges. For the vlan aware bridge, the port sp
    ecific attributes must be specified under the port. And for vlan u
    naware bridge port specific attributes must be specified under the
    bridge.


      **bridge-vlan-aware**

        **help**: vlan aware bridge. Setting this attribute to yes ena
        bles vlan filtering on the bridge


        **required**: False

        **example**:
            bridge-vlan-aware yes/no


      **bridge-pathcosts**

        **help**: bridge set port path costs


        **required**: False

        **default**: 100

        **example**:
            bridge-pathcosts swp1=100 swp2=100


      **bridge-portprios**

        **help**: bridge port prios


        **required**: False

        **default**: 32

        **example**:
            bridge-portprios swp1=32 swp2=32


      **bridge-fd**

        **help**: bridge forward delay


        **required**: False

        **default**: 15

        **example**:
            bridge-fd 15


      **bridge-ageing**

        **help**: bridge ageing


        **required**: False

        **default**: 300

        **example**:
            bridge-ageing 300


      **bridge-hello**

        **help**: bridge set hello time


        **required**: False

        **default**: 2

        **example**:
            bridge-hello 2


      **bridge-gcint**

        **help**: bridge garbage collection interval in secs


        **required**: False

        **default**: 4

        **example**:
            bridge-gcint 4


      **bridge-mcquerier**

        **help**: set multicast querier


        **required**: False

        **default**: 0

        **example**:
            bridge-mcquerier 0


      **bridge-mclmc**

        **help**: set multicast last member count


        **required**: False

        **default**: 2

        **example**:
            bridge-mclmc 2


      **bridge-mcsqc**

        **help**: set multicast startup query count


        **required**: False

        **default**: 2

        **example**:
            bridge-mcsqc 2


      **bridge-mcrouter**

        **help**: set multicast router


        **required**: False

        **default**: 1

        **example**:
            bridge-mcrouter 1


      **bridge-stp**

        **help**: bridge-stp yes/no


        **required**: False

        **default**: no

        **validvals**: yes,on,off,no

        **example**:
            bridge-stp no


      **bridge-pvid**

        **help**: bridge port pvid. Must be specified under the bridge
        port


        **required**: False

        **example**:
            bridge-pvid 1


      **bridge-mcsqi**

        **help**: set multicast startup query interval (in secs)


        **required**: False

        **default**: 31

        **example**:
            bridge-mcsqi 31


      **bridge-mcmi**

        **help**: set multicast membership interval (in secs)


        **required**: False

        **default**: 260

        **example**:
            bridge-mcmi 260


      **bridge-mclmi**

        **help**: set multicast last member interval (in secs)


        **required**: False

        **default**: 1

        **example**:
            bridge-mclmi 1


      **bridge-vids**

        **help**: bridge port vids. Can be specified under the bridge 
        or under the port. If specified under the bridge the ports inh
        erit it unless overridden by a bridge-vids attribuet under the
        port


        **required**: False

        **example**:
            bridge-vids 4000

            bridge-vids 2000 2200-3000


      **bridge-ports**

        **help**: bridge ports


        **required**: True

        **example**:
            bridge-ports swp1.100 swp2.100 swp3.100

            bridge-ports glob swp1-3.100

            bridge-ports glob swp[1-3]s[0-4].100

            bridge-ports regex (swp[1|2|3].100)


      **bridge-mcqifaddr**

        **help**: set multicast query to use ifaddr


        **required**: False

        **default**: 0

        **example**:
            bridge-mcqifaddr 0


      **bridge-waitport**

        **help**: wait for a max of time secs for the specified ports 
        to become available,if no ports are specified then those speci
        fied on bridge-ports will be used here. Specifying no ports he
        re should not be used if we are using regex or "all" on bridge
        _ports,as it wouldnt work.


        **required**: False

        **default**: 0

        **example**:
            bridge-waitport 4 swp1 swp2


      **bridge-mcqri**

        **help**: set multicast query response interval (in secs)


        **required**: False

        **default**: 10

        **example**:
            bridge-mcqri 10


      **bridge-hashel**

        **help**: set hash elasticity


        **required**: False

        **default**: 4096

        **example**:
            bridge-hashel 4096


      **bridge-mcqpi**

        **help**: set multicast querier interval (in secs)


        **required**: False

        **default**: 255

        **example**:
            bridge-mcqpi 255


      **bridge-hashmax**

        **help**: set hash max


        **required**: False

        **default**: 4096

        **example**:
            bridge-hashmax 4096


      **bridge-bridgeprio**

        **help**: bridge priority


        **required**: False

        **default**: 32768

        **example**:
            bridge-bridgeprio 32768


      **bridge-maxage**

        **help**: bridge set maxage


        **required**: False

        **default**: 20

        **example**:
            bridge-maxage 20


      **bridge-mcsnoop**

        **help**: set multicast snooping


        **required**: False

        **default**: 1

        **example**:
            bridge-mcsnoop 1


      **bridge-access**

        **help**: bridge port access vlan. Must be specified under the
        bridge port


        **required**: False

        **example**:
            bridge-access 300


      **bridge-maxwait**

        **help**: forces to time seconds the maximum time that the Deb
        ian bridge setup  scripts will wait for the bridge ports to ge
        t to the forwarding status, doesn't allow factional part. If i
        t is equal to 0 then no waiting is done


        **required**: False

        **default**: 0

        **example**:
            bridge-maxwait 3


      **bridge-portmcrouter**

        **help**: set port multicast routers


        **required**: False

        **default**: 1

        **example**:
            under the bridge: bridge-portmcrouter swp1=1 swp2=1

            under the port: bridge-portmcrouter 1


      **bridge-portmcfl**

        **help**: port multicast fast leave.


        **required**: False

        **default**: 0

        **example**:
            under the bridge: bridge-portmcfl swp1=0 swp2=0

            under the port: bridge-portmcfl 0


      **bridge-mcqi**

        **help**: set multicast query interval (in secs)


        **required**: False

        **default**: 125

        **example**:
            bridge-mcqi 125



    **usercmds**: user commands for interfaces


      **down**

        **help**: run command at interface down


        **required**: False

      **post-up**

        **help**: run command after interface bring up


        **required**: False

      **up**

        **help**: run command at interface bring up


        **required**: False

      **pre-down**

        **help**: run command before bringing the interface down


        **required**: False

      **pre-up**

        **help**: run command before bringing the interface up


        **required**: False

      **post-down**

        **help**: run command after bringing interface down


        **required**: False


    **mstpctl**: mstp configuration module for bridges


      **mstpctl-portadminedge**

        **help**: enable/disable initial edge state of the port


        **required**: False

        **default**: no

        **validvals**: yes,no

        **example**:
            mstpctl-portadminedge swp1=no swp2=no


      **mstpctl-portbpdufilter**

        **help**: enable/disable bpdu filter on a port. syntax varies 
        when defined under a bridge vs under a port


        **required**: False

        **default**: no

        **validvals**: yes,no

        **example**:
            under a bridge: mstpctl-portbpdufilter swp1=no swp2=no

            under a port: mstpctl-portbpdufilter yes


      **mstpctl-fdelay**

        **help**: set forwarding delay


        **required**: False

        **default**: 15

        **example**:
            mstpctl-fdelay 15


      **mstpctl-portnetwork**

        **help**: enable/disable bridge assurance capability for a por
        t


        **required**: False

        **default**: no

        **validvals**: yes,no

        **example**:
            mstpctl-portnetwork swp1=no swp2=no


      **mstpctl-txholdcount**

        **help**: bridge transmit holdcount


        **required**: False

        **default**: 6

        **example**:
            mstpctl-txholdcount 6


      **mstpctl-forcevers**

        **help**: bridge force stp version


        **required**: False

        **default**: rstp

        **example**:
            mstpctl-forcevers rstp


      **mstpctl-portautoedge**

        **help**: enable/disable auto transition to/from edge state of
        the port


        **required**: False

        **default**: yes

        **validvals**: yes,no

        **example**:
            mstpctl-portautoedge swp1=yes swp2=yes


      **mstpctl-maxhops**

        **help**: bridge max hops


        **required**: False

        **default**: 15

        **example**:
            mstpctl-maxhops 15


      **mstpctl-treeprio**

        **help**: tree priority


        **required**: False

        **default**: 32768

        validrange: 0-65535

        **example**:
            mstpctl-treeprio 32768


      **mstpctl-treeportprio**

        **help**: port priority for MSTI instance


        **required**: False

        **default**: 128

        validrange: 0-240

        **example**:
            mstpctl-treeportprio swp1=128 swp2=128


      **mstpctl-portpathcost**

        **help**: bridge port path cost


        **required**: False

        **default**: 0

        **example**:
            mstpctl-portpathcost swp1=0 swp2=1


      **mstpctl-portrestrtcn**

        **help**: enable/disable port ability to propagate received to
        pology change notification of the port


        **required**: False

        **default**: no

        **validvals**: yes,no

        **example**:
            mstpctl-portrestrtcn swp1=no swp2=no


      **mstpctl-maxage**

        **help**: max message age


        **required**: False

        **default**: 20

        **example**:
            mstpctl-maxage 20


      **mstpctl-hello**

        **help**: set hello time


        **required**: False

        **default**: 2

        **example**:
            mstpctl-hello 2


      **mstpctl-portrestrrole**

        **help**: enable/disable port ability to take root role of the
        port


        **required**: False

        **default**: no

        **validvals**: yes,no

        **example**:
            mstpctl-portrestrrole swp1=no swp2=no


      **mstpctl-bpduguard**

        **help**: enable/disable bpduguard


        **required**: False

        **default**: no

        **validvals**: yes,no

        **example**:
            mstpctl-bpduguard swp1=no swp2=no


      **mstpctl-ageing**

        **help**: ageing time


        **required**: False

        **default**: 300

        **example**:
            mstpctl-ageing 300


      **mstpctl-treeportcost**

        **help**: port tree cost


        **required**: False

      **mstpctl-portp2p**

        **help**: bridge port p2p detection mode


        **required**: False

        **default**: auto

        **validvals**: yes,no,auto

        **example**:
            mstpctl-portp2p swp1=no swp2=no



    **clagd**: This module generates the clagd defaults file.


      **clagd-priority**

        **help**: The priority of this clagd switch


        **required**: False

        **example**:
            clagd-priority 30000


      **clagd-backup-ip**

        **help**: Backup IP address of the clagd peer


        **required**: False

        **example**:
            clagd-backup-ip 192.1.1.1


      **clagd-enable**

        **help**: enable clagd


        **required**: False

        **validvals**: yes,no

        **example**:
            clagd-enable yes


      **clag-id**

        **help**: multi-chassis lag id


        **required**: False

        **default**: 0

        validrange: 0-65535

        **example**:
            clag-id 1


      **clagd-peer-ip**

        **help**: The IP address of the clagd peer


        **required**: True

        **example**:
            clagd-peer 10.10.10.2


      **clagd-sys-mac**

        **help**: The system ID of the CLAG pair


        **required**: True

        **example**:
            clagd-sys-mac 44:38:39:ff:00:00


      **clagd-args**

        **help**: Additional command line arguments for clagd


        **required**: False

        **example**:
            clagd-args --log /var/log/clagd.log

            clagd-args --verbose --lacpPoll 10

            clagd-args --debug 0x4



    **vlan**: vlan module configures vlan interfaces.This module under
    stands vlan interfaces with dot notations. eg swp1.100. Vlan inter
    faces with any other names need to have raw device and vlan id att
    ributes


      **vlan-id**

        **help**: vlan id


        **required**: False

      **vlan-raw-device**

        **help**: vlan raw device


        **required**: False


    **bridgevlan**: bridgevlan module configures vlan attributes on a 
    vlan aware bridge. This module only understands vlan interface nam
    e with dot notations. eg br0.100. where br0 is the vlan aware brid
    ge this config is for


      **bridge-igmp-querier-src**

        **help**: bridge igmp querier src. Must be specified under the
        vlan interface


        **required**: False

        **example**:
            bridge-igmp-querier-src 172.16.101.1



    **bond**: bond configuration module


      **bond-use-carrier**

        **help**: bond use carrier


        **required**: False

        **default**: 1

        **validvals**: 0,1

        **example**:
            bond-use-carrier 1


      **bond-lacp-bypass-period**

        **help**: grace period (seconds) for lacp bypass


        **required**: False

        **default**: 0

        validrange: 0-900

        **example**:
            bond-lacp-bypass-period 100


      **bond-miimon**

        **help**: bond miimon


        **required**: False

        **default**: 0

        validrange: 0-255

        **example**:
            bond-miimon 0


      **bond-lacp-rate**

        **help**: bond lacp rate


        **required**: False

        **default**: 0

        **validvals**: 0,1

        **example**:
            bond-lacp-rate 0


      **bond-lacp-bypass-priority**

        **help**: slave priority for lacp bypass


        **required**: False

        **example**:
            bond-lacp-bypass-priority swp1=1 swp2=1 swp3=2


      **bond-min-links**

        **help**: bond min links


        **required**: False

        **default**: 0

        **example**:
            bond-min-links 0


      **bond-slaves**

        **help**: bond slaves


        **required**: True

        **example**:
            bond-slaves swp1 swp2

            bond-slaves glob swp1-2

            bond-slaves regex (swp[1|2)


      **bond-lacp-bypass-allow**

        **help**: allow lacp bypass


        **required**: False

        **default**: 0

        **validvals**: 0,1

        **example**:
            bond-lacp-bypass-allow 0


      **bond-lacp-bypass-allow-all-active**

        **help**: allow all slaves to be active in lacp bypass irrespective of priority


        **required**: False

        **default**: 0

        **validvals**: 0,1

        **example**:
            bond-lacp-bypass-all-active 1


      **bond-mode**

        **help**: bond mode


        **required**: False

        **default**: balance-rr

        **validvals**: balance-rr,active-backup,balance-xor,broadcast,802.3ad,balance-tlb,balance-alb

        **example**:
            bond-mode 802.3ad


      **bond-num-unsol-na**

        **help**: bond slave devices


        **required**: False

        **default**: 1

        validrange: 0-255

        **example**:
            bond-num-unsol-na 1


      **bond-ad-sys-priority**

        **help**: 802.3ad system priority


        **required**: False

        **default**: 65535

        **example**:
            bond-ad-sys-priority 65535


      **bond-xmit-hash-policy**

        **help**: bond slave devices


        **required**: False

        **default**: layer2

        **validvals**: layer2,layer3+4,layer2+3

        **example**:
            bond-xmit-hash-policy layer2


      **bond-num-grat-arp**

        **help**: bond use carrier


        **required**: False

        **default**: 1

        validrange: 0-255

        **example**:
            bond-num-grat-arp 1


      **bond-ad-sys-mac-addr**

        **help**: 802.3ad system mac address


        **required**: False

        **default**: 00:00:00:00:00:00

        **example**:
            bond-ad-sys-mac-addr 00:00:00:00:00:00



    **address**: address configuration module for interfaces


      **broadcast**

        **help**: broadcast address


        **required**: False

        **example**:
            broadcast 10.0.1.255


      **hwaddress**

        **help**: hw address


        **required**: False

        **example**:
            hwaddress 44:38:39:00:27:b8


      **alias**

        **help**: description/alias


        **required**: False

        **example**:
            alias testnetwork


      **address**

        **help**: ipv4 or ipv6 addresses


        **required**: False

        **example**:
            address 10.0.12.3/24

            address 2000:1000:1000:1000:3::5/128


      **scope**

        **help**: scope


        **required**: False

        **example**:
            scope host


      **address-purge**

        **help**: purge existing addresses. By default any existing ip
        addresses on an interface are purged to match persistant addre
        sses in the interfaces file. Set this attribute to 'no'if you 
        want to preserve existing addresses


        **required**: False

        **default**: yes

        **example**:
            address-purge yes/no


      **preferred-lifetime**

        **help**: preferred lifetime


        **required**: False

        **example**:
            preferred-lifetime forever

            preferred-lifetime 10


      **gateway**

        **help**: default gateway


        **required**: False

        **example**:
            gateway 255.255.255.0


      **mtu**

        **help**: interface mtu


        **required**: False

        **default**: 1500

        **example**:
            mtu 1600



    **addressvirtual**: address module configures virtual addresses fo
    r interfaces. It creates a macvlan interface for every mac ip addr
    ess-virtual line


      **address-virtual**

        **help**: bridge router virtual mac and ip


        **required**: False

        **example**:
            address-virtual 00:11:22:33:44:01 11.0.1.254/24 11.0.1.254/24



    **vxlan**: vxlan module configures vxlan interfaces.


      **vxlan-learning**

        **help**: vxlan learning on/off


        **required**: False

        **default**: on

        **example**:
            vxlan-learning off


      **vxlan-id**

        **help**: vxlan id


        **required**: True

        **example**:
            vxlan-id 100


      **vxlan-remoteip**

        **help**: vxlan remote ip


        **required**: False

        **example**:
            vxlan-remoteip 172.16.22.127


      **vxlan-svcnodeip**

        **help**: vxlan id


        **required**: False

        **example**:
            vxlan-svcnodeip 172.16.22.125


      **vxlan-local-tunnelip**

        **help**: vxlan local tunnel ip


        **required**: False

        **example**:
            vxlan-local-tunnelip 172.16.20.103



SEE ALSO
========
    interfaces(5),
    ifup(8),
    ip(8),
    mstpctl(8),
    brctl(8),
    ethtool(8),
    clagctl(8)