[14:53:46] root:~ # ifquery -a
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet dhcp
auto vlan1903
iface vlan1903
alias LAB-CUST-VMS
vlan-id 1903
vlan-raw-device bridge
address 2a06:c01:1:1903::3/64
address 185.98.123.3/24
address-virtual 00:00:5e:00:01:a3 2a06:c01:1:1903::1/64 fe80::1/64 185.98.123.1/24
vrf public
auto public
iface public
vrf-table auto
auto bridge
iface bridge
bridge-ports swp1
[14:53:47] root:~ # ifup -a
[14:53:50] root:~ # ip addr show vlan1903-v0
46: vlan1903-v0@vlan1903: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master public state UP group default
link/ether 00:00:5e:00:01:a3 brd ff:ff:ff:ff:ff:ff
inet 185.98.123.1/24 scope global vlan1903-v0
valid_lft forever preferred_lft forever
inet6 2a06:c01:1:1903::1/64 scope global
valid_lft forever preferred_lft forever
inet6 fe80::200:5eff:fe00:1a3/64 scope link
valid_lft forever preferred_lft forever
inet6 fe80::1/64 scope link
valid_lft forever preferred_lft forever
[14:53:52] root:~ #
[14:53:54] root:~ #
[14:53:54] root:~ # nano /etc/network/interfaces
[14:53:57] root:~ # ifquery vlan1903
auto vlan1903
iface vlan1903
alias LAB-CUST-VMS
vlan-id 1903
vlan-raw-device bridge
address 2a06:c01:1:1903::3/64
address 185.98.123.3/24
address-virtual 00:00:5e:00:01:a3 2a06:c01:1:1903::1/64 fe80::1/64 185.98.123.1/24
address-virtual-ipv6-addrgen off
vrf public
[14:54:05] root:~ # ifdown -a -X eth0
[14:54:08] root:~ # ifup -a -v
...
...
info: executing /bin/ip -force -batch - [link set dev vlan1903-v0 master public
link set dev vlan1903-v0 addrgenmode none
link set dev vlan1903-v0 down
link set dev vlan1903-v0 address 00:00:5e:00:01:a3
link set dev vlan1903-v0 up
addr add 2a06:c01:1:1903::1/64 dev vlan1903-v0
addr add fe80::1/64 dev vlan1903-v0
addr add 185.98.123.1/24 dev vlan1903-v0
route del 2a06:c01:1:1903::/64 table 1001 dev vlan1903-v0
route del fe80::/64 table 1001 dev vlan1903-v0
route add 2a06:c01:1:1903::/64 table 1001 dev vlan1903-v0 proto kernel metric 9999
route add fe80::/64 table 1001 dev vlan1903-v0 proto kernel metric 9999
]
...
...
[14:54:14] root:~ # ip addr show vlan1903-v0
50: vlan1903-v0@vlan1903: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master public state UP group default
link/ether 00:00:5e:00:01:a3 brd ff:ff:ff:ff:ff:ff
inet 185.98.123.1/24 scope global vlan1903-v0
valid_lft forever preferred_lft forever
inet6 2a06:c01:1:1903::1/64 scope global
valid_lft forever preferred_lft forever
inet6 fe80::1/64 scope link
valid_lft forever preferred_lft forever
[14:54:16] root:~ #
Reviewed-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: Julien Fortin <julien@cumulusnetworks.com>
This is a major update coming all at once from master-next branch
master-next branch was started with --orphan option which is basically a new
branch without history.
The major changes are:
- repackaging
- cleanup the directory tree
- rewritte setup.py to allow install from deb file or pypi (pip install)
- add a Makefile to make things (like building a deb) easier
- review all debian files
Signed-off-by: Julien Fortin <julien@cumulusnetworks.com>
ifupdown2 code was one level deeper because ifupdown2 initially
had ifupdown2 and ifupdown2-addons as two separate packages.
Since they were combined into one package, it makes sense to
move all combined code under the top level directory
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
