original commit ported to the python3 branch:
commit bffa619b11
Author: Maximilian Wilhelm <max@rfc2324.org>
Date: Sat Jan 14 19:08:01 2017 +0100
Add option 'veth-peer-name' to veth links and ensure proper configuration.
The option »veth-peer-name« forces an veth peer link to be created with
a specific interface name. As the interface name of the "local" part of
the veth link pair already is defined by the name of the interface stanza
this option is added to, now both sides are clearly named.
As there is a bidirectional dependency of both link pairs - both cannot
exist without the other - this presents a problem when setting up all
interfaces. Depending on which interface is set up first there might be
a problem when only on dependency is specified. Therefore adding the
»veth-peer-name« option to both interface of the veth link pair ensures
that regardless of which side is configured first the peer name will be
set correctly. This intentionally creates a circular dependency which is
handled accordingly.
Fixing the config check for veth link-type while at it :)
Signed-off-by: Maximilian Wilhelm <max@rfc2324.org>
Signed-off-by: Julien Fortin <julien@cumulusnetworks.com>
Enabling this attribute on a bridge will
enslave a dummy interface to the bridge
example:
auto bridge
iface bridge
bridge-vlan-aware yes
bridge-always-up yes
bridge-ports vni42
Signed-off-by: Julien Fortin <julien@cumulusnetworks.com>
ifupdown2 now tries to monitor the dhclient call to see if an ip address was
successfully assigned on the requested device. The number of retry can be
customized using the "dhclient_retry_on_failure" policy variable (which defaults to 0)
This commit also add debugging capabilities by automatically enabling sysloging when
configuring dhcp at boot (with PERFMODE option).
Signed-off-by: Julien Fortin <julien@cumulusnetworks.com>
ES bonds have the same "init state" requirements as CLAG bonds -
1. A bond needs to be designated as an "es-bond" for this purpose.
For clag-bonds we used "clag-id" attr (to designate a bond as a "clag-bond").
For ES bonds we will use "es-sys-mac" attr.
2. Slaves added to an "ES bond" must have protodown-on.
This is again similar to CLAG bonds
3. And vice-versa i.e. when a slave is removed from an "es-bond",
protodown-on must be cleared.
4. When es-sys-mac is first set on a bond, all the bond-slaves must be
placed in "protodown-on" state. This is needed whether FRR is running at that point or not.
Signed-off-by: Julien Fortin <julien@cumulusnetworks.com>
this feature doesn't seem to be working anyway. This can be revisited in the
future but this allows us to drop the python3-argcomplete dependency for now
Signed-off-by: Julien Fortin <julien@cumulusnetworks.com>
* master:
addons: address: process MTU before addrgen and adddresses
ifupdownmain: support for marking interfaces as mgmt interfaces
addons: bridge: fix TypeError: sequence item 0: expected string, int found
addons: bridge: set bridge MTU after bridge creation addons: bridge: get bridge MTU from address policy not bridge
addons: mstpctl: check mstpctl-stp and bridge-stp and fix bridge cache update
lib: nlcache: fix dry_run exception
addons: address: add support for a separate default mtu policy for eth interfaces
debian: changelog: new 2.0.2-1 entry
addons: ethtool: add support for "ethtool_ignore_errors" policy
LinkUtils: mac_str_to_int: fix string to int conversion
addons: dhcp: if mgmt vrf context exec dhclient in default vrf
* master-next:
argv: move --nldebug option to common_argparse to avoid exception in ifreload
debian: changelog: new 2.0.1-1 entry
argv: add new command line argument --nldebug
This commit adds the feature to change offloads for nics. Currently GRO, LRO GSO, TSO, UFO, TX and RX Offload are supported.
python3 ipaddress behave differently from python2-ipaddr, this is
a serious problem for us since it breaks most of the ip addresses
code. The work around install the python3-ipaddr via pip3 (and
installs pip3 if necessary). The workaround will stay in the code
util the ipaddress issue is fixed.
Signed-off-by: Julien Fortin <julien@cumulusnetworks.com>
IPNetwork doesn't exists anymore and is replaced by ip_network. IPv?Network (4 and 6)
objects take an optional argument "strict" that defaults to True. If strict is set
and the ip address has the host bit set it will raise an exception. This is bad
for ifupdown2, so we need to replace all calls to IPNetwork and IPv?Network with
function who will set strict to False. That way we can limit the number of changes
for this patch.
Signed-off-by: Julien Fortin <julien@cumulusnetworks.com>
* New. policymanager: merge module policy instead of overriding duplicates
* New: set default mtu on user defined device (via link-type)
Signed-off-by: Julien Fortin <julien@cumulusnetworks.com>
New vxlan-ttl attribute: specifies the TTL value to use in outgoing
packets. Valid values: range 1..255 or auto (0)
Signed-off-by: Julien Fortin <julien@cumulusnetworks.com>
ifupdown2 behaviour significantly diverges from ifupdown on debian stretch.
Original ifupdown uses run-parts which supposedly doesn't run non-executable
files in the directory. However, ifupdown2 doesn't seem to make this
distinction.
This patch will log warning EACCES exceptions (instead of log error) and exit 0
Reported-by: George Diamantopoulos <gedia>
Signed-off-by: Julien Fortin <julien@cumulusnetworks.com>
ifupdown2 used /var/tmp/network/ to store its state file
upstream users reported that when /var/tmp is not mounted
before network configuration ifupdown2 fails. We now let
user define which location they want to use for the state
file.
closes: #918832
Reported-by: Maximilian Wilhelm <max@sdn.clinic>
Signed-off-by: Julien Fortin <julien@cumulusnetworks.com>
