#!/usr/bin/python # # Copyright 2014 Cumulus Networks, Inc. All rights reserved. # Author: Roopa Prabhu, roopa@cumulusnetworks.com # import json import ifupdown.policymanager as policymanager try: import os from ipaddr import IPNetwork from sets import Set from ifupdown.iface import * from ifupdown.exceptions import moduleNotSupported from ifupdown.utils import utils from ifupdownaddons.utilsbase import * from ifupdownaddons.modulebase import moduleBase, NotSupported from ifupdownaddons.iproute2 import iproute2 import ifupdown.ifupdownflags as ifupdownflags except ImportError, e: raise ImportError (str(e) + "- required module not found") class ethtool(moduleBase,utilsBase): """ ifupdown2 addon module to configure ethtool attributes """ _modinfo = {'mhelp' : 'ethtool configuration module for interfaces', 'attrs': { 'link-speed' : {'help' : 'set link speed', 'validvals' : ['100', '1000', '10000', '40000', '100000'], 'example' : ['link-speed 1000'], 'default' : 'varies by platform and port'}, 'link-duplex' : {'help': 'set link duplex', 'example' : ['link-duplex full'], 'validvals' : ['half', 'full'], 'default' : 'full'}, 'link-autoneg' : {'help': 'set autonegotiation', 'example' : ['link-autoneg on'], 'validvals' : ['yes', 'no', 'on', 'off'], 'default' : 'varies by platform and port'}, 'link-fec' : {'help': 'set forward error correction mode', 'example' : ['link-fec rs'], 'validvals' : ['rs', 'baser', 'on', 'off'], 'default' : 'varies by platform and port'}}} def __init__(self, *args, **kargs): moduleBase.__init__(self, *args, **kargs) if not os.path.exists('/sbin/ethtool'): raise moduleNotSupported('module init failed: no /sbin/ethtool found') self.ipcmd = None # keep a list of iface objects who have modified link attributes self.ifaceobjs_modified_configs = [] def _post_up(self, ifaceobj, operation='post_up'): """ _post_up and _pre_down will reset the layer 2 attributes to default policy settings. """ if not self.ipcmd.link_exists(ifaceobj.name): return cmd = '' feccmd = '' for attr in ['speed', 'duplex', 'autoneg', 'fec']: # attribute existed before but we must reset to default config_val = ifaceobj.get_attr_value_first('link-%s'%attr) default_val = policymanager.policymanager_api.get_iface_default( module_name='ethtool', ifname=ifaceobj.name, attr='link-%s'%attr) if not default_val and not config_val: # there is no point in checking the running config # if we have no default and the user did not have settings continue # check running values running_val = self.get_running_attr(attr, ifaceobj) if attr == 'autoneg': config_val = utils.get_onoff_bool(config_val) # we need to track if an interface has a configured value # this will be used if there are duplicate iface stanza and # the configured interface will always take precedence. # so even if we do not change the settings because they match # what is configured, we need to append it here so that later duplicate # ifaces will see that we had a configured iface and not change things. if config_val and config_val == running_val: # running value is what is configured, do nothing # this prevents unconfigured ifaces from resetting to default self.ifaceobjs_modified_configs.append(ifaceobj.name) continue if not config_val and default_val and default_val == running_val: # nothing configured but the default is running continue # if we are the oldest sibling, we have to reset to defaults # unless a previous sibling had link attr configured and made changes if ((ifaceobj.flags & iface.HAS_SIBLINGS) and (ifaceobj.flags & iface.OLDEST_SIBLING) and (ifaceobj.name in self.ifaceobjs_modified_configs)): continue # If we have siblings AND are not the oldest AND we have no configs, # do not change anything. The only way a non-oldest sibling would # change values is if it had configured settings. iface stanzas may # not be squashed if addr_config_squash is not set so we still need this. if ((ifaceobj.flags & iface.HAS_SIBLINGS) and not (ifaceobj.flags & iface.OLDEST_SIBLING) and not config_val): continue if attr == 'fec': # if we got this far, we need to change it if config_val and (config_val != running_val): # if the configured value is not set, set it feccmd = ' %s %s' % ("encoding", config_val) elif default_val and (default_val != running_val): # or if it has a default not equal to running value, set it feccmd = ' %s %s' % ("encoding", default_val) else: # no value set nor default, leave it alone pass else: # if we got this far, we need to change it if config_val and (config_val != running_val): # if the configured value is not set, set it cmd += ' %s %s' % (attr, config_val) elif default_val and (default_val != running_val): # or if it has a default not equal to running value, set it cmd += ' %s %s' % (attr, default_val) else: # no value set nor default, leave it alone pass if cmd: try: # we should only be calling ethtool if there # is a speed set or we can find a default speed # because we should only be calling ethtool on swp ports # we also need to set this here in case we changed # something. this prevents unconfigured ifaces from resetting to default self.ifaceobjs_modified_configs.append(ifaceobj.name) cmd = 'ethtool -s %s %s' %(ifaceobj.name, cmd) utils.exec_command(cmd) except Exception, e: self.log_error('%s: %s' %(ifaceobj.name, str(e)), ifaceobj) else: pass if feccmd: try: # we should only be calling ethtool if there # is a speed set or we can find a default speed # because we should only be calling ethtool on swp ports # we also need to set this here in case we changed # something. this prevents unconfigured ifaces from resetting to default self.ifaceobjs_modified_configs.append(ifaceobj.name) feccmd = 'ethtool --set-fec %s %s' %(ifaceobj.name, feccmd) utils.exec_command(feccmd) except Exception, e: self.log_error('%s: %s' %(ifaceobj.name, str(e)), ifaceobj) else: pass def _pre_down(self, ifaceobj): pass #self._post_up(ifaceobj,operation="_pre_down") def _query_check(self, ifaceobj, ifaceobjcurr): """ _query_check() needs to compare the configured (or running) attribute with the running attribute. If there is nothing configured, we compare the default attribute with the running attribute and FAIL if they are different. This is because a reboot will lose their running attribute (the default will get set). """ for attr in ['speed', 'duplex', 'autoneg', 'fec']: configured = ifaceobj.get_attr_value_first('link-%s'%attr) # if there is nothing configured, do not check if not configured: if not ifupdownflags.flags.WITHDEFAULTS: continue default = policymanager.policymanager_api.get_iface_default( module_name='ethtool', ifname=ifaceobj.name, attr='link-%s'%attr) # if we have no default, do not bother checking # this avoids ethtool calls on virtual interfaces if not default: continue # autoneg comes from ethtool whereas speed and duplex from /sys/class running_attr = self.get_running_attr(attr, ifaceobj) if (not running_attr): continue if attr == 'autoneg': if configured == 'yes' and running_attr == 'on': running_attr = 'yes' elif configured == 'no' and running_attr == 'off': running_attr = 'no' # we make sure we can get a running value first if (running_attr and configured and running_attr == configured): # PASS since running is what is configured ifaceobjcurr.update_config_with_status('link-%s'%attr, running_attr, 0) elif (running_attr and configured and running_attr != configured): # We show a FAIL since it is not the configured or default ifaceobjcurr.update_config_with_status('link-%s'%attr, running_attr, 1) elif (running_attr and default and running_attr == default): # PASS since running is default ifaceobjcurr.update_config_with_status('link-%s'%attr, running_attr, 0) elif (default or configured): # We show a FAIL since it is not the configured or default ifaceobjcurr.update_config_with_status('link-%s'%attr, running_attr, 1) return def get_autoneg(self,ethtool_output=None): """ get_autoneg simply calls the ethtool command and parses out the autoneg value. """ ethtool_attrs = ethtool_output.split() if ('Auto-negotiation:' in ethtool_attrs): return(ethtool_attrs[ethtool_attrs.index('Auto-negotiation:')+1]) else: return(None) def get_fec_encoding(self,ethtool_output=None): """ get_fec_encoding simply calls the ethtool show-fec command and parses out the fec encoding value. """ try: for attr in ethtool_output.splitlines(): if attr.startswith('FEC encodings'): fec_attrs = attr.split() return(fec_attrs[fec_attrs.index(':')+1]) except Exception as e: self.logger.debug('ethtool: problems in ethtool set-fec output' ' %s: %s' %(ethtool_output.splitlines(), str(e))) return(None) def get_running_attr(self,attr='',ifaceobj=None): if not ifaceobj or not attr: return running_attr = None try: if attr == 'autoneg': output = utils.exec_commandl(['ethtool', ifaceobj.name]) running_attr = self.get_autoneg(ethtool_output=output) elif attr == 'fec': output = utils.exec_command('ethtool --show-fec %s'%(ifaceobj.name)) running_attr = self.get_fec_encoding(ethtool_output=output) else: running_attr = self.read_file_oneline('/sys/class/net/%s/%s' % \ (ifaceobj.name, attr)) except Exception as e: # for nonexistent interfaces, we get an error (rc = 256 or 19200) self.logger.debug('ethtool: problems calling ethtool or reading' ' /sys/class on iface %s for attr %s: %s' % (ifaceobj.name, attr, str(e))) return running_attr def _query_running(self, ifaceobj, ifaceobj_getfunc=None): """ _query_running looks at the speed and duplex from /sys/class and retreives autoneg from ethtool. We do not report autoneg if speed is not available because this usually means the link is down and the autoneg value is not reliable when the link is down. """ # do not bother showing swp ifaces that are not up for the speed # duplex and autoneg are not reliable. if not self.ipcmd.is_link_up(ifaceobj.name): return for attr in ['speed', 'duplex', 'autoneg']: default_val = policymanager.policymanager_api.get_iface_default( module_name='ethtool', ifname=ifaceobj.name, attr='link-%s'%attr) # do not continue if we have no defaults # this avoids ethtool calls on virtual interfaces if not default_val: continue running_attr = self.get_running_attr(attr, ifaceobj) # Only show the link attributes if they differ from defaults # to see the defaults, we should implement another flag (--with-defaults) if default_val == running_attr: continue # do not proceed if speed = 0 if attr == 'speed' and running_attr and running_attr == '0': return if running_attr: ifaceobj.update_config('link-%s'%attr, running_attr) return def _query(self, ifaceobj, **kwargs): """ add default policy attributes supported by the module """ for attr in ['speed', 'duplex', 'autoneg', 'fec']: if ifaceobj.get_attr_value_first('link-%s'%attr): continue default = policymanager.policymanager_api.get_iface_default( module_name='ethtool', ifname=ifaceobj.name, attr='link-%s' %attr) if not default: continue ifaceobj.update_config('link-%s' %attr, default) _run_ops = {'pre-down' : _pre_down, 'post-up' : _post_up, 'query-checkcurr' : _query_check, 'query-running' : _query_running, 'query' : _query} def get_ops(self): """ returns list of ops supported by this module """ return self._run_ops.keys() def _init_command_handlers(self): if not self.ipcmd: self.ipcmd = iproute2() def run(self, ifaceobj, operation, query_ifaceobj=None, **extra_args): """ run ethtool configuration on the interface object passed as argument Args: **ifaceobj** (object): iface object **operation** (str): any of 'post-up', 'query-checkcurr', 'query-running' Kwargs: **query_ifaceobj** (object): query check ifaceobject. This is only valid when op is 'query-checkcurr'. It is an object same as ifaceobj, but contains running attribute values and its config status. The modules can use it to return queried running state of interfaces. status is success if the running state is same as user required state in ifaceobj. error otherwise. """ if ifaceobj.link_kind: return op_handler = self._run_ops.get(operation) if not op_handler: return self._init_command_handlers() if operation == 'query-checkcurr': op_handler(self, ifaceobj, query_ifaceobj) else: op_handler(self, ifaceobj)