mirror/CumulusNetworks-ifupdown2
1
0
Fork 0
mirror of https://github.com/CumulusNetworks/ifupdown2.git synced 2024-05-06 15:54:50 +00:00
Code
CumulusNetworks-ifupdown2/debian/changelog
Julien Fortin 577b903785 debian: changelog: new entry: 3.3.0 
* New: performance improvement: replace glob.glob with os.listdir
  * New: bridge: Do not create untagged vlans on "external" vxlan ports
  * New: Attribute: "disable-ipv6" to control ipv6 on an interface
  * New: Policy: "default_loopback_scope" control loopback ip scope
  * Fix: keep link down after mac change if 'link-down yes' is specified
  * Fix: addressvirtual: stale mac detection is missing vrr without ip
  * Fix: bond: warn if sub interface is detected on bond slave
  * Fix: bridge: update bridge-fd valid range to 2-255

Signed-off-by: Julien Fortin <jfortin@nvidia.com>
2023-12-20 18:09:49 +01:00

427 lines
18 KiB
Plaintext
Raw Blame History

ifupdown2 (3.3.0) unstable; urgency=medium
* New: performance improvement: replace glob.glob with os.listdir
* New: bridge: Do not create untagged vlans on "external" vxlan ports
* New: Attribute: "disable-ipv6" to control ipv6 on an interface
* New: Policy: "default_loopback_scope" control loopback ip scope
* Fix: keep link down after mac change if 'link-down yes' is specified
* Fix: addressvirtual: stale mac detection is missing vrr without ip
* Fix: bond: warn if sub interface is detected on bond slave
* Fix: bridge: update bridge-fd valid range to 2-255
-- Julien Fortin <jfortin@nvidia.com> Thu, 04 May 2023 23:42:42 -0700
ifupdown2 (3.2.0) unstable; urgency=medium
* Fix: Sonarqube issues
* Fix: ifquery hangs indefinitely on ^C
* Fix: Skipping admin down on deleted vlans
* Fix: Merge existing MTU into new netlink object
* Fix: scheduler: env variable not properly set for user commands (fixes #218)
* Fix: ifquery-check: vlan-protocol for dotted interfaces
* Fix: Down ops on vrf-slave should set the slave admin down
* New: Allow bond creation without slaves
* New: Add `--set-ring` option to ethtool
* New: Openvswitch : add support for fakebridge
* New: add support for systemd logging (--systemd)
* New: Process hwaddress before processing ip addresses
* New: Set protodown off on bond slave before bond is deleted
* New: Make sure bond speed and slaves (swps) speed are matching
-- Julien Fortin <jfortin@nvidia.com> Thu, 04 May 2023 23:42:00 -0700
ifupdown2 (3.1.0-1) unstable; urgency=medium
* New: ifquery-check now validates admin state
* New: bond: bond mac should always be inherited from it's first slave
* New: macvlan/addressvirtual features:
- check interface name lenght and warn if len > 15
- sync macvlan forwarding state with lower-device
* New: vxlan features:
- Single vxlan device support (bridge-vlan-vni-map)
New attributes:
- vxlan-mcastgrp-map (vxlan multicast group for single-vxlan device)
- vxlan-vnifilter (vxlan vni filter for single-vxlan device)
- vxlan-remoteip-map (static HREP entries for static single vxlan dev)
- vxlan-tos (ToS value)
- vxlan-udp-csum (whether to perform checksumming or not)
New policy:
- vxlan-support-mix-dev-types: allow mix of traditional and single
vxlan device (default to yes)
* New: bridge features:
- add multi bridge support for bridge_set_static_mac_from_port=yes
- check if bridge mac is already inherited from a port
- detect VXLAN mis-config VNI "bridge-learning=on" and warn
- detect and warn when arp suppression is enabled but no vlan config
- bridge-arp-nd-suppress with ifquery --with-default if policy is set
- enable ipv6 on SVD brport
- enable forwarding on dhcp bridges (fixes: #179)
New attribute:
- bridge-vlan-vni-map (single vxlan device support)
New policy:
- bridge_always_up_dummy_brport
* New: address features:
- warn user if L3-SVI is configured with "ip-forward off"
- enable ipv6 before adding new address
New policies:
- check_l3_svi_ip_forwarding (check ip forward on l3 svi, default off)
- ip_blacklist: blacklist specific ip addresses
* New: vlan features:
- check vlan-id misconfiguration and print warning
New attribute:
- vlan-bridge-binding (if enabled link state is no longer automatically
transferred from the lower device)
* Fix: address: remove stale fdb entry for svi (when hwaddress is used)
* Fix: usercmds: Set environment just like the original ifupdown
* Fix: update mako template warning (python3-mako)
* Fix: batman_adv: fix unresolved reference
-- Julien Fortin <jfortin@nvidia.com> Mon, 05 Jul 2021 23:42:42 +0200
ifupdown2 (3.0.0-1) unstable; urgency=medium
* New: python3 support
* New: attribute alias support
* New: bridge-always-up attribute
* New: set bridge mtu with policy default
* New: ES bond with "es-sys-mac" attribute
* New: vxlan attribute: vxlan-mcastgrp-map
* New: support for "veth-peer-name" attribute
* New: dhcp policy: dhclient_retry_on_failure
* New: support for marking interfaces as mgmt interfaces
* New: bridge-vlan-vni-map attribute (single vxlan device)
* New: dhcp: skipping dhcp configuration if link-down yes
* New: vrf-slave: keep vlan down if lower device has "link-down yes"
* New: vxlan: support for vxlan-svcnodeip6 and vxlan-mcastgrp6 (fixes #43)
* New: support for add ovs-ports-condone-regex attribute (openvswitch)
* Fix: dry-run exceptions
* Fix: bond enslavement ordering
* Fix: process MTU before addrgen
* Fix: set bridge MTU after bridge creation
* Fix: ifquery-running: incorrect displayed data
* Fix: tunnel configuration compatibility with ifupdown1
* Fix: start-networking script is back to handle mgmt & hotplug cases
* Fix: devices matching with ".{0,13}\-v" could get removed by ifreload
* Fix: mstpctl: check mstpctl-stp and bridge-stp and fix bridge cache update
* Removing python-argcomplete dependency
-- Julien Fortin <julien@cumulusnetworks.com> Tue, 04 Aug 2020 23:42:42 +0200
ifupdown2 (2.0.2-1) unstable; urgency=medium
* New: addons: ethtool: add support for "ethtool_ignore_errors" policy
* New: addons: dhcp: if mgmt vrf context exec dhclient in default vrf
* Fix: nlpacket: don't raise an exception on 24 bytes mac address (#140)
* Fix: IFLA_INFO_KIND: decode tunnel data
* Fix: XFRM for 2.x release
* Fix: addons.conf: remove duplicate entry for tunnel pre-up
-- Julien Fortin <julien@cumulusnetworks.com> Wed, 04 Mar 2020 23:42:42 +0100
ifupdown2 (2.0.1-1) unstable; urgency=medium
* New argv option: --nldebug to print netlink debug message
* New: ethtool: nics (GRO, LRO GSO, TSO, UFO, TX and RX) offload attributes
-- Julien Fortin <julien@cumulusnetworks.com> Tue, 31 Dec 2019 15:21:06 +0100
ifupdown2 (2.0.0-1) unstable; urgency=medium
* Introduction of the live netlink cache
* Refactoring and PEP8 fixes
* Install systemd ifupdown2.netowrking.service and ifup.service
* Addons: bond: bond-primary attributes (closes: #9)
* Addons: address-virtual: vrrp support
* Addons: address: add arp-accept option
* Addons: tunnel: adding "tunnel-" prefix to every attributes
* Loopback interface won't go down (unless link-down yes)
* Macvlans (address-virtual) can now be configured without ips
* Add support for vxlan multicast group (vxlan-mcastgrp)
* New sets of poliicies:
- bridge polcy for vxlan port: bridge-vxlan-arp-nd-suppres (ON/off)
- bridge policy for vxlan port: bridge_vxlan_port_learning (ON/off)
- bridge policy for vxlan port:
vxlan_bridge_igmp_snooping_enable_port_mcrouter (1/0)
-- Julien Fortin <julien@cumulusnetworks.com> Tue, 01 Oct 2019 23:42:42 +0200
ifupdown2 (1.2.8-1) unstable; urgency=medium
* New: Add policy dhcp6-duid to specify DUID type to be used for IPv6 interfaces
-- Julien Fortin <julien@cumulusnetworks.com> Thu, 11 Jul 2019 23:42:42 +0200
ifupdown2 (1.2.7-1) unstable; urgency=medium
* New: Add bridge-ports-condone-regex option (closes #117)
-- Julien Fortin <julien@cumulusnetworks.com> Tue, 09 Jul 2019 23:42:42 +0200
ifupdown2 (1.2.6-1) unstable; urgency=medium
* Fix: AttributeError exception in bridge module (fixes #90)
* Fix: ifupdownaddons: LinkUtils fix cmd concatenation (closes: #930839)
* New. policymanager: merge module policy instead of overriding duplicates
* New: set default mtu on user defined device (via link-type)
* New: add support for vxlan-ttl attribute
* New: add support for vrrp attribute
* New: introduce new bridge policy:
"vxlan_bridge_igmp_snooping_enable_port_mcrouter"
* New: link-down yes will also down macvlans
* New: XFRM addon module
* New: Add policy to wait for IPv6 link local address to be available
-- Julien Fortin <julien@cumulusnetworks.com> Sun, 23 Jun 2019 23:42:42 -1000
ifupdown2 (1.2.5-1) unstable; urgency=medium
* Fix: ifupdown2 scripts: log warning on EACCES exception (Fixes #89)
* Fix: debian: install sysvinit script (closes: #918775)
* Fix: debian: postinst: remove diversion after upgrade from stretch
(closes: #919443)
-- Julien Fortin <julien@cumulusnetworks.com> Mon, 21 Jan 2019 23:42:42 +8000
ifupdown2 (1.2.4-1) unstable; urgency=medium
* Fix: statemanager directory path customization via ifupdown2.conf
(closes: #918832)
-- Julien Fortin <julien@cumulusnetworks.com> Fri, 11 Jan 2019 23:42:42 +0000
ifupdown2 (1.2.3-1) unstable; urgency=medium
* Fix: log: use stderr if syslog initialization fails (closes: #917534)
-- Julien Fortin <julien@cumulusnetworks.com> Sun, 30 Dec 2018 23:42:42 +0700
ifupdown2 (1.2.2-1) unstable; urgency=medium
* New: add support for B.A.T.M.A.N. adv. attributes
* New: support for new iproute2 format (bridge vlan show)
* New: add new checks for existing device with vxlan attributes
* Fix: pypi install: local addons modules should be loaded first
* Fix: link-down yes on vrf slaves
* Fix: nlmanager: use strerror to format kernel error
* Fix: ethtool: FEC: translate None and NotSupported values to link-fec off
* Fix: man: remove non-implemented -m option (closes: #905572)
-- Julien Fortin <julien@cumulusnetworks.com> Thu, 20 Dec 2018 23:42:42 +0000
ifupdown2 (1.2.1) UNRELEASED; urgency=medium
* Fix #54: address module new l3_intf_default_gateway_set_onlink policy
* Fix: Link down does not work on any intf configured in a VRF
* Add: ethtool: add link-speed 10 to valid values array
* Add: address: add l3_intf_arp_accept policy to control ARP_ACCEPT
* Add: warning when bridge attribute are used on non br[port] intf
* Add: point-to-point protocol (ppp) addon to create/configure ppp interfaces
* Add: tunnel support (gretap, ipip, sit, vti, ip6gre, ipip6, ip6ip6, vti6)
* Add: 0/1/on/off/yes/no support to ip[6]-forward attribute
* Add: address module_globals policy l3_intf_arp_accept to control ARP_ACCEPT
* addressvirtual module_globals "addressvirtual_with_route_metric" policy
* Closes: ethtool: link-fec: local variable 'fec_attrs'
referencede before assignment
* Fix: ifquery -r incorrect for address-virtual and vrf configuration under
an interface
-- Julien Fortin <julien@cumulusnetworks.com> Wed, 24 Oct 2018 23:42:42 +0200
ifupdown2 (1.2.0) UNRELEASED; urgency=medium
* Package architecture refactoring and cleanups
* Package can be build/install as debian, pip or rpm package
* Makefile to easily perform tasks (i.e.: install, build, test, upload..)
* VRF slaves: add support for link-down yes
* addressvirtual: macvlan: add default metric to ip4 and ip6
* Closes #48: Run up/down on "manual" interfaces, but ignore any errors.
* Closes #58: address addon "vlan_aware_bridge_address_support" policy
* Traditional bridge support for mstpctl attr: (portautoedge, portrestrrole)
* Configuration for IPv6 link-local auto-generate mode, new attributes:
ipv6-addrgen (address addon)
address-virtual-ipv6-addrgen (addressvirtual addon)
-- Julien Fortin <julien@cumulusnetworks.com> Mon, 25 Jun 2018 23:42:42 +0200
ifupdown2 (1.1.18) UNRELEASED; urgency=medium
* Fix: Link down does not work on SVI configured in a VRF
* Fix: ifreload causes MTU to drop on bridge SVIs
* Fix: addons: addressvirtual: check if SVI name is first in routing table
* Fix: ifreload error on deleting bond slaves from an already configured bond
* Fix: ifupdown2 error is confusing when netmask is specified for vxlan-local-tunnelip
* Fix: ifupdown2 syntax check needed for vxlan interfaces
* Fix: vxlan-ageing default timer doesn't align with bridge-ageing
* Fix: Error with "ifreload -a -n" when MGMT VRF is not Applied
* Fix: using reserved VLAN range reports error but ifreload returns 0
* Fix: unable to set bridge-portmcrouter to "2"
* Fix: vxlan syntax-check warn on missing vxlan-local-tunnelip
* Fix: traditional bridge svi breaks when extra bridge added
* Fix: github #39: addons: vrf: fix vrf slave link kind
* New. Enabled: addons: vxlan: add support for vxlan-port attribute
-- Julien Fortin <julien@cumulusnetworks.com> Thu, 12 Apr 2018 11:10:04 +0200
ifupdown2 (1.1.17) UNRELEASED; urgency=medium
* Fix: ip[6]-forward attributes not set at boot
-- Julien Fortin <julien@cumulusnetworks.com> Thu, 08 Feb 2018 09:48:37 +0100
ifupdown2 (1.1.16) UNRELEASED; urgency=medium
* Fix: python exception on macvlans address dump
* Fix: eth0 doesn't acquire DHCP address when mgmt VRF is enabled
-- Julien Fortin <julien@cumulusnetworks.com> Tue, 09 Jan 2018 02:02:58 +0100
ifupdown2 (1.1.15) UNRELEASED; urgency=medium
* New. Enabled: bridge: add support for bridge-l2protocol-tunnel
* New. Enabled: bridge attributes, when removed reset to default
* New. Enabled: vxlan attributes, when removed reset to default
* New. Enabled: improve handling of optional resources (if missing bridge-utils/ethtool)
* Fix: policy "iface_defaults" not supported for MTU
* Fix: address module: handling of ipv4 & ipv6 (add/remove)
* Fix: warning for vlan reserved range
* Fix: MTU handling on bridge SVIs
-- Julien Fortin <julien@cumulusnetworks.com> Wed, 22 Nov 2017 19:07:43 +0100
ifupdown2 (1.1.14) UNRELEASED; urgency=medium
* New. Enabled: default policy for bridge MAC address
* Fix: ethtool: don't set link speed and duplex if autoneg is on
-- Julien Fortin <julien@cumulusnetworks.com> Wed, 25 Oct 2017 23:12:27 +0200
ifupdown2 (1.1.13) UNRELEASED; urgency=medium
* Fix: VRF: ssh session not killed on ifreload
-- Julien Fortin <julien@cumulusnetworks.com> Fri, 15 Sep 2017 22:43:12 +0200
ifupdown2 (1.1.12) UNRELEASED; urgency=medium
* New. Enabled: mpls-enable attribute
* New. Enabled: bond and bridge module moved to netlink configuration
* New. Enabled: handle a mix of auto and specified vrf table ids
* Fix: igmp attribute reset to defaults when removed from config
-- Julien Fortin <julien@cumulusnetworks.com> Mon, 07 Aug 2017 22:14:03 +0200
ifupdown2 (1.1.11) UNRELEASED; urgency=medium
* Fix: link-down attribute not applied on slave ports
* Fix: bug that prevented config of mtu below 1280
-- Julien Fortin <julien@cumulusnetworks.com> Thu, 18 May 2017 12:45:21 -0700
ifupdown2 (1.1.10) UNRELEASED; urgency=medium
* New. Enabled: drop the dependency to pkg_resources, hardcode version number (closes: #855401)
* New. Enabled: adjust allow-hotplug behavior to ifupdown (closes: #855598)
* New. Enabled: bond-lacp-rate support slow/fast argument
* New. Enabled: ifquery --syntax-help: add support for json output
* New. Enabled: vlan: add new attribute 'vlan-protocol'
* New. Enabled: address: add new attribute 'ip6-forward'
* New. Enabled: bridge: add new attribute 'bridge-mcstats'
* New. Enabled: bridge: add new attribute 'bridge-vlan-stats'
* New. Enabled: bridge: add new attribute 'bridge-vlan-protocol'
* New. Enabled: bridge: add new attribute 'bridge-arp-nd-suppress'
* Fix: bond: add attribute bond-(up|down)delay
* Fix: bridge-vids: --syntax-check accepts legacy syntax
-- Julien Fortin <julien@cumulusnetworks.com> Mon, 17 Apr 2017 06:18:04 +0200
ifupdown2 (1.1.9) UNRELEASED; urgency=medium
* New. Enabled: support for bridge-learning attribute
-- Julien Fortin <julien@cumulusnetworks.com> Mon, 06 Feb 2017 13:22:51 -0800
ifupdown2 (1.1.8) UNRELEASED; urgency=medium
* New. Enabled: update link-speed values: add 25G and 50G
* New. Enabled: new 'link-down' [yes|no] attribute to keep link down
-- Julien Fortin <julien@cumulusnetworks.com> Tue, 17 Jan 2017 08:39:29 +0100
ifupdown2 (1.1.7) UNRELEASED; urgency=medium
* New. Enabled: fix for inet and inet6 dhcp on the same interface
* New. Enabled: syntax check to warn on common configuration mistakes
* New. Enabled: addons: bridge: disable ip fwding on a bridge with no ip
and no upperifaces
* Fix: fixes for MTU handling
* Fix: dhcpv6 fails if interface doesn't have link-local addr
-- Julien Fortin <julien@cumulusnetworks.com> Wed, 07 Dec 2016 05:48:45 +0100
ifupdown2 (1.1.6) UNRELEASED; urgency=medium
* Closes: github #14. add environment variables passed to user scripts
* New. Enabled: addons may provide a list of ifupdown scripts to ignore
-- Julien Fortin <julien@cumulusnetworks.com> Mon, 19 Sep 2016 16:37:36 -0700
ifupdown2 (1.1.5) UNRELEASED; urgency=medium
* Fix: handling of EXISTS errors on address add
* Fix: handling of mtu on addressvirtual macvlan devices
* Fix: mako namespace handling
-- Julien Fortin <julien@cumulusnetworks.com> Fri, 16 Sep 2016 12:48:04 -0700
ifupdown2 (1.1.4) UNRELEASED; urgency=medium
* Performance improvements
* New. Enabled: sbin: start-networking: support hotplug class from init script
* New. Enabled: support for classical numerical bond modes
* New. Enabled: extend ifquery support for mstpctl addons
* New. Enabled: each addon may perform semantic and syntax checks by
implementing a custom method
* Fix: Support for address-virtual lines under a vrf slave
* Fix: Defaults for link attributes were not applied
* Fix: Disable IPv6 duplicate address detection on VRR interfaces
* Fix: ifquery to extract vlan-id from iface if not preset
* Fix: ifquery -c bridge pvid error on a valid config
-- Julien Fortin <julien@cumulusnetworks.com> Fri, 29 Jul 2016 08:55:50 -0700
ifupdown2 (1.1.3) UNRELEASED; urgency=medium
* Fix: Interface configuration parsing error when keyword vlan
is the interface name.
-- Julien Fortin <julien@cumulusnetworks.com> Sun, 05 Jun 2016 08:55:50 -0700
ifupdown2 (1.1.2) UNRELEASED; urgency=medium
* Fix: checks for invalid address-virtual attributes
* New. Deprecated: `mstpctl-stp` attribute
* New. Deprecated: lacp parameters: bond-ad-sys-priority, bond-ad-sys-mac-addr
* New. Enabled: addon module for configuring vrf
* New. Enabled: bridge: display warning when (in vlan unware bridge)
an untagged bridge is not configured
* New. Enabled: adjusting MTU for vlan devices depending on lower device mtu
* New. Enabled: introduce checks for reserved vrf table names
* New. Enabled: ifquery: new option '--with-defaults' to include default
attributes
* New. Enabled: bridge: disabling ipv6 on bridge if any VXLAN port
* New. Enabled: vrf awareness in dhcp addon module
-- Julien Fortin <julien@cumulusnetworks.com> Tue, 3 May 2016 14:42:42 -0700
ifupdown2 (1.1) unstable; urgency=low
* Initial release.
-- Roopa Prabhu <roopa@cumulusnetworks.com> Thu, 20 Aug 2015 06:14:24 -0700
View Git Blame Copy Permalink