mirror of
https://github.com/CumulusNetworks/ifupdown2.git
synced 2024-05-06 15:54:50 +00:00
594fb088e8
Ticket: CM-8866 Reviewed By: Roopa Testing Done: added support for: * bond-lacp-bypass-allow (0|1) * bond-use-carrier (0|1) * bridge-mcqifaddr (0|1) * bridge-mcquerier (0|1) * bridge-mcrouter (0|1) * bridge-mcsnoop (0|1) * bridge-portmcrouter (0|1) * link-autoneg (off|on) * vxlan-learning (off|on) these 2 are not yet supported by ifupdown2: * bond-lacp-bypass-all-active (0|1) * bond-lacp-fallback-allow (0|1) This one is left untouched. yes/no doesn't make sense for this attribute. * bond-lacp-rate (0|1) Signed-off-by: Julien Fortin <julien@cumulusnetworks.com>
93 lines
1.9 KiB
Plaintext
93 lines
1.9 KiB
Plaintext
#
|
|
# vlan-aware bridge with bonds example
|
|
#
|
|
# uplink1, peerlink and downlink are bond interfaces.
|
|
# 'bridge' is a vlan aware bridge with ports uplink1, peerlink
|
|
# and downlink (swp2-20).
|
|
#
|
|
# native vlan is by default 1
|
|
#
|
|
# 'bridge-vids' attribute is used to declare vlans.
|
|
# 'bridge-pvid' attribute is used to specify native vlans if other than 1
|
|
# 'bridge-access' attribute is used to declare access port
|
|
#
|
|
auto lo
|
|
iface lo
|
|
|
|
auto eth0
|
|
iface eth0 inet dhcp
|
|
|
|
# bond interface
|
|
auto uplink1
|
|
iface uplink1
|
|
bond-slaves swp32
|
|
bond-mode 802.3ad
|
|
bond-miimon 100
|
|
bond-use-carrier yes
|
|
bond-lacp-rate 1
|
|
bond-min-links 1
|
|
bond-xmit-hash-policy layer2
|
|
bridge-vids 2000-2079
|
|
|
|
# bond interface
|
|
auto peerlink
|
|
iface peerlink
|
|
bond-slaves swp30 swp31
|
|
bond-mode 802.3ad
|
|
bond-miimon 100
|
|
bond-use-carrier yes
|
|
bond-lacp-rate 1
|
|
bond-min-links 1
|
|
bond-xmit-hash-policy layer3+4
|
|
bridge-vids 2000-2079 4094
|
|
|
|
# bond interface
|
|
auto downlink
|
|
iface downlink
|
|
bond-slaves swp1
|
|
bond-mode 802.3ad
|
|
bond-miimon 100
|
|
bond-use-carrier yes
|
|
bond-lacp-rate 1
|
|
bond-min-links 1
|
|
bond-xmit-hash-policy layer3+4
|
|
bridge-vids 2000-2079
|
|
|
|
#
|
|
# Declare vlans for all swp ports
|
|
# swp2-20 get vlans from 2004 to 2022.
|
|
# The below uses mako templates to generate iface sections
|
|
# with vlans for swp ports
|
|
#
|
|
%for port, vlanid in zip(range(2, 20), range(2004, 2022)) :
|
|
auto swp${port}
|
|
iface swp${port}
|
|
bridge-vids ${vlanid}
|
|
|
|
%endfor
|
|
|
|
# svi vlan 4094
|
|
auto bridge.4094
|
|
iface bridge.4094
|
|
address 11.100.1.252/24
|
|
|
|
# l2 attributes for vlan 4094
|
|
auto bridge.4094
|
|
vlan bridge.4094
|
|
bridge-igmp-querier-src 172.16.101.1
|
|
|
|
#
|
|
# vlan aware bridge
|
|
#
|
|
auto bridge
|
|
iface bridge
|
|
bridge-vlan-aware yes
|
|
bridge-ports uplink1 peerlink downlink glob swp2-20
|
|
bridge-stp on
|
|
|
|
# svi peerlink vlan
|
|
auto peerlink.4094
|
|
iface peerlink.4094
|
|
address 192.168.10.1/30
|
|
broadcast 192.168.10.3
|