Switch over to using automake

.gitignore

@@ -3,6 +3,33 @@ Makefile
 config.h
 *.o
 bgpq4
-config.log
+Makefile.in
-config.status
+.deps
+/ar-lib
+/mdate-sh
+/py-compile
+/test-driver
+/ylwrap
 autom4te.cache
+/autoscan.log
+/autoscan-*.log
+/aclocal.m4
+/compile
+/config.guess
+/config.h.in
+/config.log
+/config.status
+/config.sub
+/configure
+/configure.scan
+/depcomp
+/install-sh
+/missing
+/stamp-h1
+/ltmain.sh
+/texinfo.tex
+m4/libtool.m4
+m4/ltoptions.m4
+m4/ltsugar.m4
+m4/ltversion.m4
+m4/lt~obsolete.m4

Makefile.am

@@ -0,0 +1,21 @@
+AUTOMAKE_OPTIONS=foreign subdir-objects
+bin_PROGRAMS=bgpq4
+bgpq4_SOURCES=bgpq4.c sx_report.c bgpq_expander.c sx_slentry.c \
+              bgpq4_printer.c sx_prefix.c strlcpy.c sx_maxsockbuf.c \
+              bgpq4.h config.h sx_maxsockbuf.h sx_prefix.h \
+              sx_report.h sx_slentry.h sys_queue.h sys_tree.h
+dist_doc_DATA=bgpq4.html
+dist_man8_MANS=bgpq4.8
+EXTRA_DIST=bootstrap readme.header README.md
+
+bgpq4.html: readme.header README.md
+	cat readme.header README.md | @MARKDOWN@ > bgpq4.html
+
+clean-local:
+	@rm config.status configure config.log
+	@rm Makefile
+	@rm -r autom4te.cache/
+	@rm aclocal.m4
+	@rm compile install-sh missing Makefile.in depcomp stamp-h1
+	@rm config.h config.h.in
+

Makefile.in

@@ -1,42 +0,0 @@
-CC=@CC@
-CFLAGS=@CFLAGS@ @DEFS@ -g -Wall -I. -O0
-LDADD=@LDFLAGS@ @LIBS@
-INSTALL=@INSTALL@
-
-prefix = @prefix@
-bindir = @bindir@
-exec_prefix = @exec_prefix@
-datarootdir = @datarootdir@
-datadir = @datadir@
-infodir = @infodir@
-mandir = @mandir@
-
-
-OBJECTS=bgpq4.o sx_report.o bgpq_expander.o sx_slentry.o bgpq4_printer.o \
-	sx_prefix.o strlcpy.o sx_maxsockbuf.o
-SRCS=bgpq4.c sx_report.c bgpq_expander.c sx_slentry.c bgpq4_printer.c \
-	sx_prefix.c strlcpy.c sx_maxsockbuf.c
-
-all: bgpq4
-
-bgpq4: ${OBJECTS}
-	${CC} ${CFLAGS} -o bgpq4 ${OBJECTS} ${LDADD}
-
-.c.o: 
-	${CC} ${CFLAGS} -c $<
-
-clean: 
-	rm -rf Makefile autom4te.cache bgpq4 config.h config.log config.status
-	rm -rf *.o *.core core.* core
-
-install: bgpq4
-	if test ! -d @bindir@ ; then mkdir -p @bindir@ ; fi
-	${INSTALL} -c -s -m 755 bgpq4 @bindir@
-	if test ! -d @prefix@/man/man8 ; then mkdir -p @prefix@/man/man8 ; fi
-	${INSTALL} -m 644 bgpq4.8 @prefix@/man/man8
-
-depend: 
-	makedepend -- $(CFLAGS) -- $(SRCS)
-
-bgpq4.html: readme.header README.md
-	cat readme.header README.md | @MARKDOWN@ > bgpq4.html

config.h.in

@@ -1,73 +0,0 @@
-/* config.h.in.  Generated from configure.ac by autoheader.  */
-
-/* Define to 1 if you have the <inttypes.h> header file. */
-#undef HAVE_INTTYPES_H
-
-/* Define to 1 if you have the `nsl' library (-lnsl). */
-#undef HAVE_LIBNSL
-
-/* Define to 1 if you have the `socket' library (-lsocket). */
-#undef HAVE_LIBSOCKET
-
-/* Define to 1 if you have the <memory.h> header file. */
-#undef HAVE_MEMORY_H
-
-/* sys/queue.h have STAILQ_ */
-#undef HAVE_STAILQ_IN_SYS_QUEUE
-
-/* Define to 1 if you have the <stdint.h> header file. */
-#undef HAVE_STDINT_H
-
-/* Define to 1 if you have the <stdlib.h> header file. */
-#undef HAVE_STDLIB_H
-
-/* Define to 1 if you have the <strings.h> header file. */
-#undef HAVE_STRINGS_H
-
-/* Define to 1 if you have the <string.h> header file. */
-#undef HAVE_STRING_H
-
-/* Define to 1 if you have the `strlcpy' function. */
-#undef HAVE_STRLCPY
-
-/* Define to 1 if you have the <sys/cdefs.h> header file. */
-#undef HAVE_SYS_CDEFS_H
-
-/* Define to 1 if you have the <sys/queue.h> header file. */
-#undef HAVE_SYS_QUEUE_H
-
-/* Define to 1 if you have the <sys/select.h> header file. */
-#undef HAVE_SYS_SELECT_H
-
-/* Define to 1 if you have the <sys/stat.h> header file. */
-#undef HAVE_SYS_STAT_H
-
-/* Define to 1 if you have the <sys/tree.h> header file. */
-#undef HAVE_SYS_TREE_H
-
-/* Define to 1 if you have the <sys/types.h> header file. */
-#undef HAVE_SYS_TYPES_H
-
-/* Define to 1 if you have the <unistd.h> header file. */
-#undef HAVE_UNISTD_H
-
-/* Define to the address where bug reports for this package should be sent. */
-#undef PACKAGE_BUGREPORT
-
-/* Define to the full name of this package. */
-#undef PACKAGE_NAME
-
-/* Define to the full name and version of this package. */
-#undef PACKAGE_STRING
-
-/* Define to the one symbol short name of this package. */
-#undef PACKAGE_TARNAME
-
-/* Define to the home page for this package. */
-#undef PACKAGE_URL
-
-/* Define to the version of this package. */
-#undef PACKAGE_VERSION
-
-/* Define to 1 if you have the ANSI C header files. */
-#undef STDC_HEADERS

configure.ac

@@ -1,6 +1,7 @@
 AC_INIT(bgpq4,0.0.2,job@ntt.net)
+AM_INIT_AUTOMAKE
 AC_PACKAGE_URL(https://github.com/bgp/bgpq4)
-AC_CONFIG_HEADER(config.h)
+AM_CONFIG_HEADER(config.h)
 AC_PROG_CC
 AC_PROG_INSTALL
 

install-sh

@@ -1,251 +0,0 @@
-#!/bin/sh
-#
-# install - install a program, script, or datafile
-# This comes from X11R5 (mit/util/scripts/install.sh).
-#
-# Copyright 1991 by the Massachusetts Institute of Technology
-#
-# Permission to use, copy, modify, distribute, and sell this software and its
-# documentation for any purpose is hereby granted without fee, provided that
-# the above copyright notice appear in all copies and that both that
-# copyright notice and this permission notice appear in supporting
-# documentation, and that the name of M.I.T. not be used in advertising or
-# publicity pertaining to distribution of the software without specific,
-# written prior permission.  M.I.T. makes no representations about the
-# suitability of this software for any purpose.  It is provided "as is"
-# without express or implied warranty.
-#
-# Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
-# when there is no Makefile.
-#
-# This script is compatible with the BSD install script, but was written
-# from scratch.  It can only install one file at a time, a restriction
-# shared with many OS's install programs.
-
-
-# set DOITPROG to echo to test this script
-
-# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
-
-
-# put in absolute paths if you don't have them in your path; or use env. vars.
-
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-mkdirprog="${MKDIRPROG-mkdir}"
-
-transformbasename=""
-transform_arg=""
-instcmd="$mvprog"
-chmodcmd="$chmodprog 0755"
-chowncmd=""
-chgrpcmd=""
-stripcmd=""
-rmcmd="$rmprog -f"
-mvcmd="$mvprog"
-src=""
-dst=""
-dir_arg=""
-
-while [ x"$1" != x ]; do
-    case $1 in
-	-c) instcmd="$cpprog"
-	    shift
-	    continue;;
-
-	-d) dir_arg=true
-	    shift
-	    continue;;
-
-	-m) chmodcmd="$chmodprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-o) chowncmd="$chownprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-g) chgrpcmd="$chgrpprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-s) stripcmd="$stripprog"
-	    shift
-	    continue;;
-
-	-t=*) transformarg=`echo $1 | sed 's/-t=//'`
-	    shift
-	    continue;;
-
-	-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
-	    shift
-	    continue;;
-
-	*)  if [ x"$src" = x ]
-	    then
-		src=$1
-	    else
-		# this colon is to work around a 386BSD /bin/sh bug
-		:
-		dst=$1
-	    fi
-	    shift
-	    continue;;
-    esac
-done
-
-if [ x"$src" = x ]
-then
-	echo "install:	no input file specified"
-	exit 1
-else
-	true
-fi
-
-if [ x"$dir_arg" != x ]; then
-	dst=$src
-	src=""
-	
-	if [ -d $dst ]; then
-		instcmd=:
-		chmodcmd=""
-	else
-		instcmd=mkdir
-	fi
-else
-
-# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
-# might cause directories to be created, which would be especially bad 
-# if $src (and thus $dsttmp) contains '*'.
-
-	if [ -f $src -o -d $src ]
-	then
-		true
-	else
-		echo "install:  $src does not exist"
-		exit 1
-	fi
-	
-	if [ x"$dst" = x ]
-	then
-		echo "install:	no destination specified"
-		exit 1
-	else
-		true
-	fi
-
-# If destination is a directory, append the input filename; if your system
-# does not like double slashes in filenames, you may need to add some logic
-
-	if [ -d $dst ]
-	then
-		dst="$dst"/`basename $src`
-	else
-		true
-	fi
-fi
-
-## this sed command emulates the dirname command
-dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
-
-# Make sure that the destination directory exists.
-#  this part is taken from Noah Friedman's mkinstalldirs script
-
-# Skip lots of stat calls in the usual case.
-if [ ! -d "$dstdir" ]; then
-defaultIFS='	
-'
-IFS="${IFS-${defaultIFS}}"
-
-oIFS="${IFS}"
-# Some sh's can't handle IFS=/ for some reason.
-IFS='%'
-set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
-IFS="${oIFS}"
-
-pathcomp=''
-
-while [ $# -ne 0 ] ; do
-	pathcomp="${pathcomp}${1}"
-	shift
-
-	if [ ! -d "${pathcomp}" ] ;
-        then
-		$mkdirprog "${pathcomp}"
-	else
-		true
-	fi
-
-	pathcomp="${pathcomp}/"
-done
-fi
-
-if [ x"$dir_arg" != x ]
-then
-	$doit $instcmd $dst &&
-
-	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
-	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
-	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
-	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
-else
-
-# If we're going to rename the final executable, determine the name now.
-
-	if [ x"$transformarg" = x ] 
-	then
-		dstfile=`basename $dst`
-	else
-		dstfile=`basename $dst $transformbasename | 
-			sed $transformarg`$transformbasename
-	fi
-
-# don't allow the sed command to completely eliminate the filename
-
-	if [ x"$dstfile" = x ] 
-	then
-		dstfile=`basename $dst`
-	else
-		true
-	fi
-
-# Make a temp file name in the proper directory.
-
-	dsttmp=$dstdir/#inst.$$#
-
-# Move or copy the file name to the temp name
-
-	$doit $instcmd $src $dsttmp &&
-
-	trap "rm -f ${dsttmp}" 0 &&
-
-# and set any options; do chmod last to preserve setuid bits
-
-# If any of these fail, we abort the whole thing.  If we want to
-# ignore errors from any of these, just make sure not to ignore
-# errors from the above "$doit $instcmd $src $dsttmp" command.
-
-	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
-	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
-	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
-	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
-
-# Now rename the file to the real destination.
-
-	$doit $rmcmd -f $dstdir/$dstfile &&
-	$doit $mvcmd $dsttmp $dstdir/$dstfile 
-
-fi &&
-
-
-exit 0