2019-05-11 23:28:13 -07:00
Commands are defined in `hyperglass/hyperglass/configuration/commands.toml` . Formatted as a nested array of tables, each table defines the commands that will be used to execute the queries on the routers.
2019-05-07 23:21:41 -07:00
Each table contains three nested tables:
##### dual
Commands that are IP protocol agnostic:
- `bgp_community`
- `bgp_aspath`
##### ipv4
Commands that are IPv4-specific:
- `bgp_route`
- `ping`
- `traceroute`
##### ipv6
Commands that are IPv6-specific:
- `bgp_route`
- `ping`
- `traceroute`
#### Default Configuration
```toml
[[cisco_ios]]
[cisco_ios.dual]
bgp_community = "show bgp all community {target}"
bgp_aspath = 'show bgp all quote-regexp "{target}"'
[cisco_ios.ipv4]
bgp_route = "show bgp ipv4 unicast {target} | exclude pathid:|Epoch"
ping = "ping {target} repeat 5 source {src_addr_ipv4}"
traceroute = "traceroute {target} timeout 1 probe 2 source {src_addr_ipv4}"
[cisco_ios.ipv6]
bgp_route = "show bgp ipv6 unicast {target} | exclude pathid:|Epoch"
ping = "ping ipv6 {target} repeat 5 source {src_addr_ipv6}"
traceroute = "traceroute ipv6 {target} timeout 1 probe 2 source {src_addr_ipv6}"
[[cisco_xr]]
[cisco_xr.dual]
bgp_community = 'show bgp all unicast community {target} | utility egrep -v "\(BGP |Table |Non-stop\)"'
bgp_aspath = 'show bgp all unicast regexp {target} | utility egrep -v "\(BGP |Table |Non-stop\)"'
[cisco_xr.ipv4]
bgp_route = 'show bgp ipv4 unicast {target} | util egrep "\(BGP routing table entry|Path \#|aggregated by|Origin |Community:|validity| from \)"'
ping = "ping ipv4 {target} count 5 source {src_addr_ipv4}"
traceroute = "traceroute ipv4 {target} timeout 1 probe 2 source {src_addr_ipv4}"
[cisco_xr.ipv6]
bgp_route = 'show bgp ipv6 unicast {target} | util egrep "\(BGP routing table entry|Path \#|aggregated by|Origin |Community:|validity| from \)"'
ping = "ping ipv6 {target} count 5 source {src_addr_ipv6}"
traceroute = "traceroute ipv6 {target} timeout 1 probe 2 source {src_addr_ipv6}"
[[juniper]]
[juniper.dual]
bgp_community = "show route protocol bgp community {target}"
bgp_aspath = "show route protocol bgp aspath-regex {target}"
[juniper.ipv4]
bgp_route = "show route protocol bgp table inet.0 {target} detail"
ping = "ping inet {target} count 5 source {src_addr_ipv4}"
traceroute = "traceroute inet {target} wait 1 source {src_addr_ipv4}"
[juniper.ipv6]
bgp_route = "show route protocol bgp table inet6.0 {target} detail"
ping = "ping inet6 {target} count 5 source {src_addr_ipv6}"
traceroute = "traceroute inet6 {target} wait 1 source {src_addr_ipv6}"
```
Every attempt has been made to filter out as much "noise" as possible from the command output.
##### `{target}`
Maps to search box input.
##### `{src_addr_ipv4}`
Maps to [src_addr_ipv4 ](configuration/devices.md/#src_addr_ipv4 )
##### `{src_addr_ipv6}`
Maps to [src_addr_ipv6 ](configuration/devices.md/#src_addr_ipv6 )
