librenms-librenms-agent/snmp/bind

#!/usr/bin/env perl
#Copyright (c) 2017, Zane C. Bowers-Hadley
#All rights reserved.
#
#Redistribution and use in source and binary forms, with or without modification,
#are permitted provided that the following conditions are met:
#
#   * Redistributions of source code must retain the above copyright notice,
#    this list of conditions and the following disclaimer.
#   * Redistributions in binary form must reproduce the above copyright notice,
#    this list of conditions and the following disclaimer in the documentation
#    and/or other materials provided with the distribution.
#
#THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
#ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
#WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
#IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
#INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, 
#BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 
#DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
#LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
#OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
#THE POSSIBILITY OF SUCH DAMAGE.

=for comment

Add this to snmpd.conf as below and restart it.

    extend bind /etc/snmp/bind

You may also need to create the config file, which defaults to the same path as the script,
but with .config appended. So if the script is located at /etc/snmp/bind, the config file
will be /etc/snmp/bind.config. Alternatively you can also specific a config via -c.

Anything starting with a # is comment. The format for variables is $variable=$value. Empty
lines are ignored. Spaces and tabes at either the start or end of a line are ignored.

The variables are as below.

    rndc = The path to rndc. Default: /usr/bin/env rndc
    call_rndc = A 0/1 boolean on weather to call rndc stats. Suggest to set to 0 if using netdata. Default: 1
    stats_file = The path to the named stats file. Default: /var/cache/bind/stats
    agent = A 0/1 boolean for if this is being used as a LibreNMS agent or not. Default: 0
    zero_stats = A 0/1 boolean for if the stats file should be zeroed first. Default: 0 (1 if guessed)

If you want to guess at the configuration, call it with -g and it will print out what it thinks
it should be.

=cut

##
## You should not need to touch anything below here.
##
my $call_rndc=1;
my $rndc='/usr/bin/env rndc';
my $stats_file='/var/cache/bind/stats';
my $zero_stats=0;
my $agent=0;
my $missing=0;

use strict;
use warnings;
use File::ReadBackwards;
use Getopt::Std;

$Getopt::Std::STANDARD_HELP_VERSION = 1;
sub main::VERSION_MESSAGE {
        print "BIND named stats extend 0.0.0\n";
};


sub main::HELP_MESSAGE {
	print "\n".
		"-c <config>   The config file to use.\n".
		"-m            print any unknowns and exit\n".
		"-g            Guess at the config and print it to STDOUT.\n";
}

#gets the options
my %opts=();
getopts('gmc:', \%opts);

# guess if asked
if ( defined( $opts{g} ) ){
	#get what path to use for rndc
	$rndc=`which rndc`;
	chomp($rndc);
	if ( $? != 0 ){
		warn("'which rndc' failed with a exit code of $?");
		exit 1;
	}else{
		$rndc="# This is the path to rndc.\n".
			'rndc='.$rndc."\n";
	}

	#make a basic guess at the stats file
	if ( -f $stats_file ){
		# a more sane location
		$stats_file="# This is the the path to the named stats file.\n".
			'stats_file='.$stats_file."\n";
	}elsif( -f '/etc/bind/named.stats' ){
		# this is if the person using the old suggested config in the LibreNMS docs
		$stats_file="# This is the the path to the named stats file.\n".
			"stats_file=/etc/bind/named.stats\n";
	}else{
		#we find it
		$stats_file="# This is the the path to the named stats file.\n".
			"# Please make sure this has been set to the value of statistics-file in named.conf.\n".
			"stats_file=?\n";
	}

	if ( $0 =~ /agent/ ){
		$agent='agent=1';
	}else{
		$agent='agent=0';
	}
	
	print "# The default config file is... ".$0.".config\n".
		$rndc.
		$stats_file.
		"# This is a 0/1 boolean for if rndc should be called.\n".
		"# If you are using netdata, you most likely want to set this to 0.\n".
		"call_rndc=1\n".
		"# This is a 0/1 boolean for this is being used as a LibreNMS agent.\n".
		$agent."\n".
		"# This is a 0/1 boolean for if the stats file should be zeroed before calling rndc stats.\n".
		"zero_stats=1\n";

	exit 0;
}

#get which config file to use
my $config=$0.'.config';
if ( defined( $opts{c} ) ){
	$config=$opts{c};
}

#reads the config file
my $config_file='';
if ( -f $config ){
	open(my $readfh, "<", $config) or die "Can't open '".$config."'";
	read($readfh , $config_file , 1000000);
	close($readfh);

	#parse the config file and remove comments and empty lines
	my @configA=split(/\n/, $config_file);
	@configA=grep(!/^$/, @configA);
	@configA=grep(!/^\#/, @configA);
	@configA=grep(!/^[\s\t]*$/, @configA);
	my $configA_int=0;
	while ( defined( $configA[$configA_int] ) ){
		my $line=$configA[$configA_int];
		$line=~s/^[\t\s]+//;
		$line=~s/[\t\s]+$//;

		my ( $var, $val )=split(/=/, $line, 2);
		
		if ( $var eq 'call_rndc' ){
			$call_rndc=$val;
		}

		if ( $var eq 'rndc' ){
			$rndc=$val;
		}

		if ( $var eq 'stats_file' ){
			$stats_file=$val;
		}

		if ( $var eq 'agent' ){
			$agent=$val;
		}

		if ( $var eq 'zero_stats' ){
			$zero_stats=$val;
		}
		
		$configA_int++;
	}
}

#zero the stats if needed
if ( $zero_stats ){
	system('echo > '.$stats_file);
	if ( $? != 0 ){
		die ("'echo > $stats_file' failed with a system return value of $?");
	}
}

# call rndc if needed and die if it failes
if ( $call_rndc ){
	system($rndc.' stats');
	if ( $? != 0 ){
		die ("'$rndc stats' failed with a system return value of $?");
	}
}

my $bw=File::ReadBackwards->new( $stats_file ) or
	die( "con't read '$stats_file': $!" );

#read backwards till we find the start of the last stats entry
my $read=1;
my @data;
until (
	($bw->eof) ||
	( ! $read )
	){

	my $new_line=$bw->readline;
	$data[$#data++]=$new_line;
	
	if ($new_line =~ /^\+\+\+\ Statistics\ Dump\ \+\+\+/){
		$read=0;
	}
}

my %incoming=(
	'A'=>0,
	'AAAA'=>0,
	'AFSDB'=>0,
	'APL'=>0,
	'CAA'=>0,
	'CDNSKEY'=>0,
	'CDS'=>0,
	'CERT'=>0,
	'CNAME'=>0,
	'DHCID'=>0,
	'DLV'=>0,
	'DNSKEY'=>0,
	'DS'=>0,
	'IPSECKEY'=>0,
	'KEY'=>0,
	'KX'=>0,
	'LOC'=>0,
	'MX'=>0,
	'NAPTR'=>0,
	'NS'=>0,
	'NSEC'=>0,
	'NSEC3'=>0,
	'NSEC3PARAM'=>0,
	'PTR'=>0,
	'RRSIG'=>0,
	'RP'=>0,
	'SIG'=>0,
	'SOA'=>0,
	'SRV'=>0,
	'SSHFP'=>0,
	'TA'=>0,
	'TKEY'=>0,
	'TLSA'=>0,
	'TSIG'=>0,
	'TXT'=>0,
	'URI'=>0,
	'DNAME'=>0,
	'ANY'=>0,
	'AXFR'=>0,
	'IXFR'=>0,
	'OPT'=>0,
	'SPF'=>0,
	);

my %outgoing=(
	'A'=>0,
	'AAAA'=>0,
	'AFSDB'=>0,
	'APL'=>0,
	'CAA'=>0,
	'CDNSKEY'=>0,
	'CDS'=>0,
	'CERT'=>0,
	'CNAME'=>0,
	'DHCID'=>0,
	'DLV'=>0,
	'DNSKEY'=>0,
	'DS'=>0,
	'IPSECKEY'=>0,
	'KEY'=>0,
	'KX'=>0,
	'LOC'=>0,
	'MX'=>0,
	'NAPTR'=>0,
	'NS'=>0,
	'NSEC'=>0,
	'NSEC3'=>0,
	'NSEC3PARAM'=>0,
	'PTR'=>0,
	'RRSIG'=>0,
	'RP'=>0,
	'SIG'=>0,
	'SOA'=>0,
	'SRV'=>0,
	'SSHFP'=>0,
	'TA'=>0,
	'TKEY'=>0,
	'TLSA'=>0,
	'TSIG'=>0,
	'TXT'=>0,
	'URI'=>0,
	'DNAME'=>0,
	'ANY'=>0,
	'AXFR'=>0,
	'IXFR'=>0,
	'OPT'=>0,
	'SPF'=>0,
	);

my %server=(
	'IPv4 requests received'=>0, #i4rr
	'IPv6 requests received'=>0, #i6rr
	'requests with EDNS(0) received'=>0, #rwer
	'TCP requests received'=>0, #trr
	'auth queries rejected'=>0, #aqr
	'recursive queries rejected'=>0, #rqr
	'responses sent'=>0, #rs
	'truncated responses sent'=>0, #trs
	'responses with EDNS(0) sent'=>0, #rwes
	'queries resulted in successful answer'=>0, #qrisa
	'queries resulted in authoritative answer'=>0, #qriaa
	'queries resulted in non authoritative answer'=>0, #qrinaa
	'queries resulted in nxrrset'=>0, #qrin
	'queries resulted in SERVFAIL'=>0, #qris
	'queries resulted in NXDOMAIN'=>0, #qrind
	'queries caused recursion'=>0, #qcr
	'duplicate queries received'=>0, #dqr
	'other query failures'=>0, #oqf
	'UDP queries received'=>0, #uqr
	'TCP queries received'=>0, #tqr
	'Other EDNS option received'=>0, #oeor
	'queries dropped'=>0, #qd
	);

my %resolver=(
	'IPv4 queries sent'=>0, #i4qs
	'IPv6 queries sent'=>0, #i6qs
	'IPv4 responses received'=>0, #i4rr
	'IPv6 responses received'=>0, #i6rr
	'NXDOMAIN received'=>0, #nr
	'SERVFAIL received'=>0, #sr
	'FORMERR received'=>0, #fr
	'EDNS(0) query failures'=>0, #eqf
	'truncated responses received'=>0, #trr
	'lame delegations received'=>0, #ldr
	'query retries'=>0, #qr
	'query timeouts'=>0, #qt
	'IPv4 NS address fetches'=>0, #i4naf
	'IPv6 NS address fetches'=>0, #i6naf
	'IPv4 NS address fetch failed'=>0, #i4naff
	'IPv6 NS address fetch failed'=>0, #i6naff
	'queries with RTT < 10ms'=>0, #rttl10
	'queries with RTT 10-100ms'=>0, #rtt10t100
	'queries with RTT 100-500ms'=>0, #rtt100t500
	'queries with RTT 500-800ms'=>0, #rtt500t800
	'queries with RTT 800-1600ms'=>0, #rtt800t1600
	'queries with RTT > 1600ms'=>0, #rttg1600
	'bucket size'=>0, #bs
	'REFUSED received'=>0 #rr
	);

my %cache=(
	'cache hits'=>0, #ch
	'cache misses'=>0, #cm
	'cache hits (from query)'=>0, #chfq
	'cache misses (from query)'=>0, #cmfq
	'cache records deleted due to memory exhaustion'=>0, #crddtme
	'cache records deleted due to TTL expiration'=>0, #crddtte
	'cache database nodes'=>0, #cdn
	'cache database hash buckets'=>0, #cdhb
	'cache tree memory total'=>0, #ctmt
	'cache tree memory in use'=>0, #ctmiu
	'cache tree highest memory in use'=>0, #cthmiu
	'cache heap memory total'=>0, #chmt
	'cache heap memory in use'=>0, #chmiu
	'cache heap highest memory in use'=>0,#chhmiu
	);

my %RRsets=(
	'A'=>0,
	'AAAA'=>0,
	'AFSDB'=>0,
	'APL'=>0,
	'CAA'=>0,
	'CDNSKEY'=>0,
	'CDS'=>0,
	'CERT'=>0,
	'CNAME'=>0,
	'DHCID'=>0,
	'DLV'=>0,
	'DNSKEY'=>0,
	'DS'=>0,
	'IPSECKEY'=>0,
	'KEY'=>0,
	'KX'=>0,
	'LOC'=>0,
	'MX'=>0,
	'NAPTR'=>0,
	'NS'=>0,
	'NSEC'=>0,
	'NSEC3'=>0,
	'NSEC3PARAM'=>0,
	'PTR'=>0,
	'RRSIG'=>0,
	'RP'=>0,
	'SIG'=>0,
	'SOA'=>0,
	'SRV'=>0,
	'SSHFP'=>0,
	'TA'=>0,
	'TKEY'=>0,
	'TLSA'=>0,
	'TSIG'=>0,
	'TXT'=>0,
	'URI'=>0,
	'DNAME'=>0,
	'NXDOMAIN'=>0,
	'ANY'=>0,
	'AXFR'=>0,
	'IXFR'=>0,
	'OPT'=>0,
	'SPF'=>0,
	'!A'=>0,
	'!AAAA'=>0,
	'!AFSDB'=>0,
	'!APL'=>0,
	'!CAA'=>0,
	'!CDNSKEY'=>0,
	'!CDS'=>0,
	'!CERT'=>0,
	'!CNAME'=>0,
	'!DHCID'=>0,
	'!DLV'=>0,
	'!DNSKEY'=>0,
	'!DS'=>0,
	'!IPSECKEY'=>0,
	'!KEY'=>0,
	'!KX'=>0,
	'!LOC'=>0,
	'!MX'=>0,
	'!NAPTR'=>0,
	'!NS'=>0,
	'!NSEC'=>0,
	'!NSEC3'=>0,
	'!NSEC3PARAM'=>0,
	'!PTR'=>0,
	'!RRSIG'=>0,
	'!RP'=>0,
	'!SIG'=>0,
	'!SOA'=>0,
	'!SRV'=>0,
	'!SSHFP'=>0,
	'!TA'=>0,
	'!TKEY'=>0,
	'!TLSA'=>0,
	'!TSIG'=>0,
	'!TXT'=>0,
	'!URI'=>0,
	'!DNAME'=>0,
	'!NXDOMAIN'=>0,
	'!ANY'=>0,
	'!AXFR'=>0,
	'!IXFR'=>0,
	'!OPT'=>0,
	'!SPF'=>0,
	);

my %ADB=(
	'Address hash table size'=>0, #ahts
	'Addresses in hash table'=>0, #aiht
	'Name hash table size'=>0, #nhts
	'Names in hash table'=>0, #niht
	);

my %sockets=(
	'UDP/IPv4 sockets opened'=>0, #ui4so
	'UDP/IPv6 sockets opened'=>0, #ui6so
	'TCP/IPv4 sockets opened'=>0, #ti4so
	'TCP/IPv6 sockets opened'=>0, #ti6so
	'Raw sockets opened'=>0, #rso
	'UDP/IPv4 sockets closed'=>0, #ui4sc
	'UDP/IPv6 sockets closed'=>0, #ui6sc
	'TCP/IPv4 sockets closed'=>0, #ti4sc
	'TCP/IPv6 sockets closed'=>0, #ti6sc
	'UDP/IPv4 socket bind failures'=>0, #ui4sbf
	'TCP/IPv4 socket bind failures'=>0, #ti4sbf
	'UDP/IPv6 socket bind failures'=>0, #ui6sbf
	'TCP/IPv6 socket bind failures'=>0, #ti6sbf
	'UDP/IPv4 socket connect failures'=>0, #ui4scf
	'TCP/IPv4 socket connect failures'=>0, #ti4scf
	'UDP/IPv6 socket connect failures'=>0, #ui6scf
	'TCP/IPv6 socket connect failures'=>0, #ti6scf
	'UDP/IPv4 connections established'=>0, #ui4ce
	'TCP/IPv4 connections established'=>0, #ti4ce
	'UDP/IPv6 connections established'=>0, #ui6ce
	'TCP/IPv6 connections established'=>0, #ti6ce
	'TCP/IPv4 connections accepted'=>0, #ti4ca
	'TCP/IPv6 connections accepted'=>0, #ti6ca
	'UDP/IPv4 send errors'=>0, #ui4se
	'TCP/IPv4 send errors'=>0, #ti4se
	'UDP/IPv6 send errors'=>0, #ui6se
	'TCP/IPv6 send errors'=>0, #ti6se
	'UDP/IPv4 recv errors'=>0, #ui4re
	'TCP/IPv4 recv errors'=>0, #ti4re
	'UDP/IPv6 recv errors'=>0, #ui6re
	'TCP/IPv6 recv errors'=>0, #ti6re
	'UDP/IPv4 sockets active'=>0, #ui4sa
	'UDP/IPv6 sockets active'=>0, #ui6sa
	'TCP/IPv4 sockets active'=>0, #ti4sa
	'TCP/IPv6 sockets active'=>0, #ti6sa
	'Raw sockets active'=>0, #rsa
	);

my $int=$#data-1;
my $section='';
while ( defined( $data[$int] ) ){
	my $line=$data[$int];
	my $done=0;
	
	if ( $line =~ /^\+\+\ Incoming\ Queries\ \+\+/ ){
		$section='incoming';
		$done=1;
	}elsif( $line =~ /\+\+\ Outgoing\ Queries\ \+\+/ ){
		$section='outgoing';
		$done=1;
	}elsif( $line =~ /^\+\+\ Name\ Server\ Statistics\ \+\+/ ){
		$section='server';
		$done=1;
	}elsif( $line =~ /^\+\+\ Resolver\ Statistics\ \+\+/ ){
		$section='resolver';
		$done=1;
	}elsif( $line =~ /^\+\+\ Cache\ Statistics\ \+\+/ ){
		$section='cache';
		$done=1;
	}elsif( $line =~ /^\+\+\ Cache\ DB\ RRsets\ \+\+/ ){
		$section='RRsets';
		$done=1;
	}elsif( $line =~ /^\+\+\ ADB\ stats\ \+\+/ ){
		$section='ADB';
		$done=1;
	}elsif( $line =~ /^\+\+\ Socket\ I\/O\ Statistics\ \+\+/ ){
		$section='sockets';
		$done=1;
	}elsif( $line =~ /^\[/ ){
		$done=1;
	}elsif( $line !~ /^[\s\t]/){
		$section='';
	}

	if (
		( $section ne '' ) && 
		( ! $done )
		) {
		$line=~s/^[\t\s]+//;
		chomp($line);
		my ( $count, $type )=split(/ /, $line, 2);
		if ( defined( $opts{m} ) ){
			eval( 'if (! defined($'.$section.'{$type} ) ){ print $section.",".$type.",".$count."\n";}' );
		}
		my $to_eval='if( defined($'.$section.'{$type}) ){$'.$section.'{$type}=$'.$section.'{$type}+$count;}';
		eval( $to_eval );
	}

	$int--;
}

#exit now if we are just checking for missing items
if ( defined( $opts{m} ) ){
	exit 0;
}

if ( $agent ){
	print "<<<bind>>>\n";
}

print $incoming{'A'}.','.
	$incoming{'AAAA'}.','.
	$incoming{'AFSDB'}.','.
	$incoming{'APL'}.','.
	$incoming{'CAA'}.','.
	$incoming{'CDNSKEY'}.','.
	$incoming{'CDS'}.','.
	$incoming{'CERT'}.','.
	$incoming{'CNAME'}.','.
	$incoming{'DHCID'}.','.
	$incoming{'DLV'}.','.
	$incoming{'DNSKEY'}.','.
	$incoming{'DS'}.','.
	$incoming{'IPSECKEY'}.','.
	$incoming{'KEY'}.','.
	$incoming{'KX'}.','.
	$incoming{'LOC'}.','.
	$incoming{'MX'}.','.
	$incoming{'NAPTR'}.','.
	$incoming{'NS'}.','.
	$incoming{'NSEC'}.','.
	$incoming{'NSEC3'}.','.
	$incoming{'NSEC3PARAM'}.','.
	$incoming{'PTR'}.','.
	$incoming{'RRSIG'}.','.
	$incoming{'RP'}.','.
	$incoming{'SIG'}.','.
	$incoming{'SOA'}.','.
	$incoming{'SRV'}.','.
	$incoming{'SSHFP'}.','.
	$incoming{'TA'}.','.
	$incoming{'TKEY'}.','.
	$incoming{'TLSA'}.','.
	$incoming{'TSIG'}.','.
	$incoming{'TXT'}.','.
	$incoming{'URI'}.','.
	$incoming{'DNAME'}.','.
	$incoming{'ANY'}.','.
	$incoming{'AXFR'}.','.
	$incoming{'IXFR'}.','.
	$incoming{'OPT'}.','.
	$incoming{'SPF'}."\n";

print $outgoing{'A'}.','.
	$outgoing{'AAAA'}.','.
	$outgoing{'AFSDB'}.','.
	$outgoing{'APL'}.','.
	$outgoing{'CAA'}.','.
	$outgoing{'CDNSKEY'}.','.
	$outgoing{'CDS'}.','.
	$outgoing{'CERT'}.','.
	$outgoing{'CNAME'}.','.
	$outgoing{'DHCID'}.','.
	$outgoing{'DLV'}.','.
	$outgoing{'DNSKEY'}.','.
	$outgoing{'DS'}.','.
	$outgoing{'IPSECKEY'}.','.
	$outgoing{'KEY'}.','.
	$outgoing{'KX'}.','.
	$outgoing{'LOC'}.','.
	$outgoing{'MX'}.','.
	$outgoing{'NAPTR'}.','.
	$outgoing{'NS'}.','.
	$outgoing{'NSEC'}.','.
	$outgoing{'NSEC3'}.','.
	$outgoing{'NSEC3PARAM'}.','.
	$outgoing{'PTR'}.','.
	$outgoing{'RRSIG'}.','.
	$outgoing{'RP'}.','.
	$outgoing{'SIG'}.','.
	$outgoing{'SOA'}.','.
	$outgoing{'SRV'}.','.
	$outgoing{'SSHFP'}.','.
	$outgoing{'TA'}.','.
	$outgoing{'TKEY'}.','.
	$outgoing{'TLSA'}.','.
	$outgoing{'TSIG'}.','.
	$outgoing{'TXT'}.','.
	$outgoing{'URI'}.','.
	$outgoing{'DNAME'}.','.
	$outgoing{'ANY'}.','.
	$outgoing{'AXFR'}.','.
	$outgoing{'IXFR'}.','.
	$outgoing{'OPT'}.','.
	$outgoing{'SPF'}."\n";

print $server{'IPv4 requests received'}.','.
	$server{'IPv6 requests received'}.','.
	$server{'requests with EDNS(0) received'}.','.
	$server{'TCP requests received'}.','.
	$server{'auth queries rejected'}.','.
	$server{'recursive queries rejected'}.','.
	$server{'responses sent'}.','.
	$server{'truncated responses sent'}.','.
	$server{'responses with EDNS(0) sent'}.','.
	$server{'queries resulted in successful answer'}.','.
	$server{'queries resulted in authoritative answer'}.','.
	$server{'queries resulted in non authoritative answer'}.','.
	$server{'queries resulted in nxrrset'}.','.
	$server{'queries resulted in SERVFAIL'}.','.
	$server{'queries resulted in NXDOMAIN'}.','.
	$server{'queries caused recursion'}.','.
	$server{'duplicate queries received'}.','.
	$server{'other query failures'}.','.
	$server{'UDP queries received'}.','.
	$server{'TCP queries received'}.','.
	$server{'Other EDNS option received'}.','.
	$server{'queries dropped'}."\n";

print $resolver{'IPv4 queries sent'}.','.
	$resolver{'IPv6 queries sent'}.','.
	$resolver{'IPv4 responses received'}.','.
	$resolver{'IPv6 responses received'}.','.
	$resolver{'NXDOMAIN received'}.','.
	$resolver{'SERVFAIL received'}.','.
	$resolver{'FORMERR received'}.','.
	$resolver{'EDNS(0) query failures'}.','.
	$resolver{'truncated responses received'}.','.
	$resolver{'lame delegations received'}.','.
	$resolver{'query retries'}.','.
	$resolver{'query timeouts'}.','.
	$resolver{'IPv4 NS address fetches'}.','.
	$resolver{'IPv6 NS address fetches'}.','.
	$resolver{'IPv4 NS address fetch failed'}.','.
	$resolver{'IPv6 NS address fetch failed'}.','.
	$resolver{'queries with RTT < 10ms'}.','.
	$resolver{'queries with RTT 10-100ms'}.','.
	$resolver{'queries with RTT 100-500ms'}.','.
	$resolver{'queries with RTT 500-800ms'}.','.
	$resolver{'queries with RTT 800-1600ms'}.','.
	$resolver{'queries with RTT > 1600ms'}.','.
	$resolver{'bucket size'}.','.
	$resolver{'REFUSED received'}."\n";

print $cache{'cache hits'}.','.
	$cache{'cache misses'}.','.
	$cache{'cache hits (from query)'}.','.
	$cache{'cache misses (from query)'}.','.
	$cache{'cache records deleted due to memory exhaustion'}.','.
	$cache{'cache records deleted due to TTL expiration'}.','.
	$cache{'cache database nodes'}.','.
	$cache{'cache database hash buckets'}.','.
	$cache{'cache tree memory total'}.','.
	$cache{'cache tree memory in use'}.','.
	$cache{'cache tree highest memory in use'}.','.
	$cache{'cache heap memory total'}.','.
	$cache{'cache heap memory in use'}.','.
	$cache{'cache heap highest memory in use'}."\n";

print $RRsets{'A'}.','.
	$RRsets{'AAAA'}.','.
	$RRsets{'AFSDB'}.','.
	$RRsets{'APL'}.','.
	$RRsets{'CAA'}.','.
	$RRsets{'CDNSKEY'}.','.
	$RRsets{'CDS'}.','.
	$RRsets{'CERT'}.','.
	$RRsets{'CNAME'}.','.
	$RRsets{'DHCID'}.','.
	$RRsets{'DLV'}.','.
	$RRsets{'DNSKEY'}.','.
	$RRsets{'DS'}.','.
	$RRsets{'IPSECKEY'}.','.
	$RRsets{'KEY'}.','.
	$RRsets{'KX'}.','.
	$RRsets{'LOC'}.','.
	$RRsets{'MX'}.','.
	$RRsets{'NAPTR'}.','.
	$RRsets{'NS'}.','.
	$RRsets{'NSEC'}.','.
	$RRsets{'NSEC3'}.','.
	$RRsets{'NSEC3PARAM'}.','.
	$RRsets{'PTR'}.','.
	$RRsets{'RRSIG'}.','.
	$RRsets{'RP'}.','.
	$RRsets{'SIG'}.','.
	$RRsets{'SOA'}.','.
	$RRsets{'SRV'}.','.
	$RRsets{'SSHFP'}.','.
	$RRsets{'TA'}.','.
	$RRsets{'TKEY'}.','.
	$RRsets{'TLSA'}.','.
	$RRsets{'TSIG'}.','.
	$RRsets{'TXT'}.','.
	$RRsets{'URI'}.','.
	$RRsets{'DNAME'}.','.
	$RRsets{'NXDOMAIN'}.','.
	$RRsets{'ANY'}.','.
	$RRsets{'AXFR'}.','.
	$RRsets{'IXFR'}.','.
	$RRsets{'OPT'}.','.
	$RRsets{'SPF'}.','.
	$RRsets{'!A'}.','.
	$RRsets{'!AAAA'}.','.
	$RRsets{'!AFSDB'}.','.
	$RRsets{'!APL'}.','.
	$RRsets{'!CAA'}.','.
	$RRsets{'!CDNSKEY'}.','.
	$RRsets{'!CDS'}.','.
	$RRsets{'!CERT'}.','.
	$RRsets{'!CNAME'}.','.
	$RRsets{'!DHCID'}.','.
	$RRsets{'!DLV'}.','.
	$RRsets{'!DNSKEY'}.','.
	$RRsets{'!DS'}.','.
	$RRsets{'!IPSECKEY'}.','.
	$RRsets{'!KEY'}.','.
	$RRsets{'!KX'}.','.
	$RRsets{'!LOC'}.','.
	$RRsets{'!MX'}.','.
	$RRsets{'!NAPTR'}.','.
	$RRsets{'!NS'}.','.
	$RRsets{'!NSEC'}.','.
	$RRsets{'!NSEC3'}.','.
	$RRsets{'!NSEC3PARAM'}.','.
	$RRsets{'!PTR'}.','.
	$RRsets{'!RRSIG'}.','.
	$RRsets{'!RP'}.','.
	$RRsets{'!SIG'}.','.
	$RRsets{'!SOA'}.','.
	$RRsets{'!SRV'}.','.
	$RRsets{'!SSHFP'}.','.
	$RRsets{'!TA'}.','.
	$RRsets{'!TKEY'}.','.
	$RRsets{'!TLSA'}.','.
	$RRsets{'!TSIG'}.','.
	$RRsets{'!TXT'}.','.
	$RRsets{'!URI'}.','.
	$RRsets{'!DNAME'}.','.
	$RRsets{'!NXDOMAIN'}.','.
	$RRsets{'!ANY'}.','.
	$RRsets{'!AXFR'}.','.
	$RRsets{'!IXFR'}.','.
	$RRsets{'!OPT'}.','.
	$RRsets{'!SPF'}."\n";
	
print $ADB{'Address hash table size'}.','.
	$ADB{'Addresses in hash table'}.','.
	$ADB{'Name hash table size'}.','.
	$ADB{'Names in hash table'}."\n";

print $sockets{'UDP/IPv4 sockets opened'}.','.
	$sockets{'UDP/IPv6 sockets opened'}.','.
	$sockets{'TCP/IPv4 sockets opened'}.','.
	$sockets{'TCP/IPv6 sockets opened'}.','.
	$sockets{'Raw sockets opened'}.','.
	$sockets{'UDP/IPv4 sockets closed'}.','.
	$sockets{'UDP/IPv6 sockets closed'}.','.
	$sockets{'TCP/IPv4 sockets closed'}.','.
	$sockets{'TCP/IPv6 sockets closed'}.','.
	$sockets{'UDP/IPv4 socket bind failures'}.','.
	$sockets{'TCP/IPv4 socket bind failures'}.','.
	$sockets{'UDP/IPv6 socket bind failures'}.','.
	$sockets{'TCP/IPv6 socket bind failures'}.','.
	$sockets{'UDP/IPv4 socket connect failures'}.','.
	$sockets{'TCP/IPv4 socket connect failures'}.','.
	$sockets{'UDP/IPv6 socket connect failures'}.','.
	$sockets{'TCP/IPv6 socket connect failures'}.','.
	$sockets{'UDP/IPv4 connections established'}.','.
	$sockets{'TCP/IPv4 connections established'}.','.
	$sockets{'UDP/IPv6 connections established'}.','.
	$sockets{'TCP/IPv6 connections established'}.','.
	$sockets{'TCP/IPv4 connections accepted'}.','.
	$sockets{'TCP/IPv6 connections accepted'}.','.
	$sockets{'UDP/IPv4 send errors'}.','.
	$sockets{'TCP/IPv4 send errors'}.','.
	$sockets{'UDP/IPv6 send errors'}.','.
	$sockets{'TCP/IPv6 send errors'}.','.
	$sockets{'UDP/IPv4 recv errors'}.','.
	$sockets{'TCP/IPv4 recv errors'}.','.
	$sockets{'UDP/IPv6 recv errors'}.','.
	$sockets{'TCP/IPv6 recv errors'}.','.
	$sockets{'UDP/IPv4 sockets active'}.','.
	$sockets{'UDP/IPv6 sockets active'}.','.
	$sockets{'TCP/IPv4 sockets active'}.','.
	$sockets{'TCP/IPv6 sockets active'}.','.
	$sockets{'Raw sockets active'}."\n";