librenms-librenms/mibs/avtech/ROOMALERT11E.MIB

--
--defines ROOMALERT11E-MIB for SNMP agent extension of Room Alert 11E
--Contents:	Global Registration Module
--		Room Alert OIDs - Enterprise 20916
--Version:	1.1.3 
--Date:		9 January 2014
--Developed By: AVTECH Software, Inc.

--
--Copyright (c) 2014 AVTECH Software, Inc.
--

ROOMALERT11E-MIB DEFINITIONS ::= BEGIN


IMPORTS
	enterprises, IpAddress, Counter, TimeTicks
		FROM RFC1155-SMI
	OBJECT-TYPE
		FROM RFC-1212
	TRAP-TYPE 
		FROM RFC-1215;


avtech      OBJECT IDENTIFIER ::= { enterprises 20916 }
products      OBJECT IDENTIFIER ::= { avtech 1 }
roomalert11E      OBJECT IDENTIFIER ::= { products 3 }
sensors       OBJECT IDENTIFIER ::= { roomalert11E 1 }
traps	      OBJECT IDENTIFIER ::= { roomalert11E 2 }
thresholds    OBJECT IDENTIFIER ::= { roomalert11E 3 }
channel1   OBJECT IDENTIFIER ::= { sensors 1 }
channel2   OBJECT IDENTIFIER ::= { sensors 2 }
channel3   OBJECT IDENTIFIER ::= { sensors 3 }
channel4   OBJECT IDENTIFIER ::= { sensors 4 }
channels   OBJECT IDENTIFIER ::= { thresholds 1 }
channels1   OBJECT IDENTIFIER ::= { channels 1 }
channels2   OBJECT IDENTIFIER ::= { channels 2 }
channels3   OBJECT IDENTIFIER ::= { channels 3 }
channels4   OBJECT IDENTIFIER ::= { channels 4 }
 
-- Room Alert 11E MIB
-- Parameters 

sensor1-1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for internal switch sensor 1 (0 = OPEN, 1 = CLOSED)."
::= { channel1 1 }

sensor1-2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for internal switch sensor 2 (0 = OPEN, 1 = CLOSED)."
::= { channel1 2 }

sensor1-3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for internal switch sensor 3 (0 = OPEN, 1 = CLOSED)."
::= { channel1 3 }

sensor1-4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for internal switch sensor 4 (0 = OPEN, 1 = CLOSED)."
::= { channel1 4 }

sensor1-5 OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for internal switch sensor 5 (0 = OPEN, 1 = CLOSED)."
::= { channel1 5 }

sensor1-6 OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for internal switch sensor 6 (0 = OPEN, 1 = CLOSED)."
::= { channel1 6 }

sensor1-7 OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for internal switch sensor 7 (0 = OPEN, 1 = CLOSED)."
::= { channel1 7 }

sensor1-8 OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for internal switch sensor 8 (0 = OPEN, 1 = CLOSED)."
::= { channel1 8 }

switch-label-1 OBJECT-TYPE
	SYNTAX		OCTET STRING
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "The label for switch sensor 1"
::= { channel1 9 }

switch-label-2 OBJECT-TYPE
	SYNTAX		OCTET STRING
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "The label for switch sensor 2"
::= { channel1 10 }

switch-label-3 OBJECT-TYPE
	SYNTAX		OCTET STRING
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "The label for switch sensor 3"
::= { channel1 11 }

switch-label-4 OBJECT-TYPE
	SYNTAX		OCTET STRING
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "The label for switch sensor 4"
::= { channel1 12 }

switch-label-5 OBJECT-TYPE
	SYNTAX		OCTET STRING
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "The label for switch sensor 5"
::= { channel1 13 }

switch-label-6 OBJECT-TYPE
	SYNTAX		OCTET STRING
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "The label for switch sensor 6"
::= { channel1 14 }

switch-label-7 OBJECT-TYPE
	SYNTAX		OCTET STRING
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "The label for switch sensor 7"
::= { channel1 15 }

switch-label-8 OBJECT-TYPE
	SYNTAX		OCTET STRING
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "The label for switch sensor 8"
::= { channel1 16 }

sensor2-1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for sensor 2-1. If a temp or temp/humidity sensor is connected, value will be current temperature in Celsius."
::= { channel2 1 }

sensor2-2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for sensor 2-2. If a temp or temp/humidity sensor is connected, value will be current temperature in Fahrenheit."
::= { channel2 2 }

sensor2-3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for sensor 2-3. If temp/humidity sensor is connected, value will be current %RH."
::= { channel2 3 }

sensor2-4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for sensor 2-4. If temp/humidity sensor is connected, value will be current Heat Index in Fahrenheit."
::= { channel2 4 }

sensor2-5 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for sensor 2-5. If temp/humidity sensor is connected, value will be current Heat Index in Celsius."
::= { channel2 5 }

sensor2-6-label OBJECT-TYPE
	SYNTAX		OCTET STRING
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "The label of this sensor"
::= { channel2 6}

sensor3-1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for sensor 3-1. If a temp or temp/humidity sensor is connected, value will be current temperature in Celsius."
::= { channel3 1 }

sensor3-2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for sensor 3-2. If a temp or temp/humidity sensor is connected, value will be current temperature in Fahrenheit."
::= { channel3 2 }

sensor3-3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for sensor 3-3. If temp/humidity sensor is connected, value will be current %RH."
::= { channel3 3 }

sensor3-4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for sensor 3-4. If temp/humidity sensor is connected, value will be current Heat Index in Fahrenheit."
::= { channel3 4 }

sensor3-5 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for sensor 3-5. If temp/humidity sensor is connected, value will be current Heat Index in Celsius."
::= { channel3 5 }

sensor3-6-label OBJECT-TYPE
	SYNTAX		OCTET STRING
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "The label of this sensor"
::= { channel3 6}

sensor4-1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for sensor 4-1. If a temp or temp/humidity sensor is connected, value will be current temperature in Celsius."
::= { channel4 1 }

sensor4-2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for sensor 4-2. If a temp or temp/humidity sensor is connected, value will be current temperature in Fahrenheit."
::= { channel4 2 }

sensor4-3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for sensor 4-3. If temp/humidity sensor is connected, value will be current %RH."
::= { channel4 3 }

sensor4-4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for sensor 4-4. If temp/humidity sensor is connected, value will be current Heat Index in Fahrenheit."
::= { channel4 4 }

sensor4-5 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for sensor 4-5. If temp/humidity sensor is connected, value will be current Heat Index in Celsius."
::= { channel4 5 }

sensor4-6-label OBJECT-TYPE
	SYNTAX		OCTET STRING
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "The label of this sensor"
::= { channel4 6}

alarm1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..255)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Alarm for sensor channel 1. The binary equivalent of the decimal number displayed will indicate which switch sensors are currently in an alarm state (0 = sensor ok, 1 = sensor in alarm state). For example, if switch sensors 1 and 4 are in alarm state, the value displayed will be 9, which equals 00001001 in binary."
::= { traps 1 }
	
alarm2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..255)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Alarm for sensor channel 2. If a digital temperature/humidity or digital temperature sensor is connected to this channel, 0 = sensor ok, 1 = high temp alarm, 2 = low temp alarm, 3 = humidity alarm. If a Switch Sensor Expansion box is connected, the binary equivalent of the decimal number displayed will indicate which switch sensors are currently in an alarm state (0 = sensor ok, 1 = sensor in alarm state). For example, if switch sensors 1 and 4 are in alarm state, the value displayed will be 9, which equals 00001001 in binary."
::= { traps 2 }
	
alarm3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..255)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Alarm for sensor channel 3. If a digital temperature/humidity or digital temperature sensor is connected to this channel, 0 = sensor ok, 1 = high temp alarm, 2 = low temp alarm, 3 = humidity alarm. If a Switch Sensor Expansion box is connected, the binary equivalent of the decimal number displayed will indicate which switch sensors are currently in an alarm state (0 = sensor ok, 1 = sensor in alarm state). For example, if switch sensors 1 and 4 are in alarm state, the value displayed will be 9, which equals 00001001 in binary."
::= { traps 3 }
	
alarm4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..255)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Alarm for sensor channel 4. If a digital temperature/humidity or digital temperature sensor is connected to this channel, 0 = sensor ok, 1 = high temp alarm, 2 = low temp alarm, 3 = humidity alarm. If a Switch Sensor Expansion box is connected, the binary equivalent of the decimal number displayed will indicate which switch sensors are currently in an alarm state (0 = sensor ok, 1 = sensor in alarm state). For example, if switch sensors 1 and 4 are in alarm state, the value displayed will be 9, which equals 00001001 in binary."
::= { traps 4 }	
	
alarmMessage1 OBJECT-TYPE
	SYNTAX  	OCTET STRING
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Alarm Message from sensor channel 1 (Internal)"
::= { traps 5 }	
	
alarmMessage2 OBJECT-TYPE
	SYNTAX  	OCTET STRING
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Alarm Message from sensor channel 2 (External)"
::= { traps 6 }	
	
alarmMessage3 OBJECT-TYPE
	SYNTAX  	OCTET STRING
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Alarm Message from sensor channel 3 (External)"
::= { traps 7 }	
	
alarmMessage4 OBJECT-TYPE
	SYNTAX  	OCTET STRING
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Alarm Message from sensor channel 4 (External)"
::= { traps 8 }	
	
threshold1-1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Threshold 1 defined for Channel 1"
::= { channels1 1 }		
	
threshold1-2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Threshold 2 defined for Channel 1"
::= { channels1 2 }
	
threshold1-3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Threshold 3 defined for Channel 1"
::= { channels1 3 }		
	
threshold1-4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Threshold 4 defined for Channel 1"
::= { channels1 4 }
	
threshold1-5 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Threshold 5 defined for Channel 1"
::= { channels1 5 }
	
threshold1-6 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Threshold 6 defined for Channel 1"
::= { channels1 6 }
	
threshold1-7 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Threshold 7 defined for Channel 1"
::= { channels1 7 }
	
threshold1-8 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Threshold 8 defined for Channel 1"
::= { channels1 8 }
	
threshold2-1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Threshold 1 defined for Channel 2"
::= { channels2 1 }		
	
threshold2-2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Threshold 2 defined for Channel 2"
::= { channels2 2 }
	
threshold2-3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Threshold 3 defined for Channel 2"
::= { channels2 3 }		
	
threshold2-4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Threshold 4 defined for Channel 2"
::= { channels2 4 }
	
threshold3-1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Threshold 1 defined for Channel 3"
::= { channels3 1 }		
	
threshold3-2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Threshold 2 defined for Channel 3"
::= { channels3 2 }
	
threshold3-3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Threshold 3 defined for Channel 3"
::= { channels3 3 }		
	
threshold3-4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Threshold 4 defined for Channel 3"
::= { channels3 4 }
	
threshold4-1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Threshold 1 defined for Channel 4"
::= { channels4 1 }		
	
threshold4-2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Threshold 2 defined for Channel 4"
::= { channels4 2 }
	
threshold4-3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Threshold 3 defined for Channel 4"
::= { channels4 3 }		
	
threshold4-4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Threshold 4 defined for Channel 4"
::= { channels4 4 }
	
	
-- ROOMALERT11E TRAPS

tempAlarm1-11e TRAP-TYPE
	ENTERPRISE	roomalert11E
	VARIABLES	{ alarmMessage2, sensor2-1, sensor2-2, sensor2-1 }
	DESCRIPTION	"A tempAlarm1 trap signifies that the current
			temperature on external sensor 1 is outside the 
			defined high or low threshold."
::= 1
	
room-alert-11E-SNMP-trap TRAP-TYPE
	ENTERPRISE	roomalert11E
	VARIABLES	{ alarmMessage1,alarmMessage2,alarmMessage3,alarmMessage4 }
	DESCRIPTION	"A Room Alert 11E SNMP Trap indicates that an alarm
			condition has occurred on the sensor inidcated
			by the alarmMessage variable."
::= 2	
	
tempAlarm2-11e TRAP-TYPE
	ENTERPRISE	roomalert11E
	VARIABLES	{ alarmMessage3, sensor3-1, sensor3-2, sensor3-1 }
	DESCRIPTION	"A tempAlarm2 trap signifies that the current
			temperature on external sensor 2 is outside the 
			defined high or low threshold."
::= 3
	
tempClear2-11e TRAP-TYPE
	ENTERPRISE	roomalert11E
	VARIABLES	{ alarmMessage3, sensor3-1, sensor3-2, sensor3-1 }
	DESCRIPTION	"A tempClear2 trap signifies that the current
			temperature on external sensor 2 has returned to
			a normal condition and is within the defined 
			high or low threshold."
::= 4	

tempAlarm3-11e TRAP-TYPE
	ENTERPRISE	roomalert11E
	VARIABLES	{ alarmMessage4, sensor4-1, sensor4-2, sensor4-1 }
	DESCRIPTION	"A tempAlarm3 trap signifies that the current
			temperature on external sensor 3 is outside the 
			defined high or low threshold."
::= 5
	
tempClear3-11e TRAP-TYPE
	ENTERPRISE	roomalert11E
	VARIABLES	{ alarmMessage4, sensor4-1, sensor4-2, sensor4-1 }
	DESCRIPTION	"A tempClear3 trap signifies that the current
			temperature on external sensor 3 has returned to
			a normal condition and is within the defined 
			high or low threshold."
::= 6
	
humidityAlarm1-11e TRAP-TYPE
	ENTERPRISE	roomalert11E
	VARIABLES	{ alarmMessage2, sensor2-1, sensor2-2, sensor2-3 }
	DESCRIPTION	"A humidityAlarm1 trap signifies that the current
			humidity on external sensor 1 is outside the 
			defined high or low threshold."
::= 7
	
humidityClear1-11e TRAP-TYPE
	ENTERPRISE	roomalert11E
	VARIABLES	{ alarmMessage2, sensor2-1, sensor2-2, sensor2-3 }
	DESCRIPTION	"A humidityClear1 trap signifies that the current
			humidity on external sensor 1 has returned to
			a normal condition and is within the defined 
			high or low threshold."
::= 8	
	
humidityAlarm2-11e TRAP-TYPE
	ENTERPRISE	roomalert11E
	VARIABLES	{ alarmMessage3, sensor3-1, sensor3-2, sensor3-3 }
	DESCRIPTION	"A humidityAlarm2 trap signifies that the current
			humidity on external sensor 2 is outside the 
			defined high or low threshold."
::= 9
	
humidityClear2-11e TRAP-TYPE
	ENTERPRISE	roomalert11E
	VARIABLES	{ alarmMessage3, sensor3-1, sensor3-2, sensor3-3 }
	DESCRIPTION	"A humidityClear2 trap signifies that the current
			humidity on external sensor 2 has returned to
			a normal condition and is within the defined 
			high or low threshold."
::= 10	

humidityAlarm3-11e TRAP-TYPE
	ENTERPRISE	roomalert11E
	VARIABLES	{ alarmMessage4, sensor4-1, sensor4-2, sensor4-3 }
	DESCRIPTION	"A humidityAlarm3 trap signifies that the current
			humidity on external sensor 3 is outside the 
			defined high or low threshold."
::= 11
	
humidityClear3-11e TRAP-TYPE
	ENTERPRISE	roomalert11E
	VARIABLES	{ alarmMessage4, sensor4-1, sensor4-2, sensor4-3 }
	DESCRIPTION	"A humidityClear3 trap signifies that the current
			humidity on external sensor 3 has returned to
			a normal condition and is within the defined 
			high or low threshold."
::= 12	
	
switchAlarm1-11e TRAP-TYPE
	ENTERPRISE	roomalert11E
	VARIABLES	{ alarmMessage1, sensor1-1, sensor1-1, sensor1-1 }
	DESCRIPTION	"A switchAlarm1 trap signifies that switch sensor 1
			is in an alarm state."
::= 13
	
switchClear1-11e TRAP-TYPE
	ENTERPRISE	roomalert11E
	VARIABLES	{ alarmMessage1, sensor1-1, sensor1-1, sensor1-1 }
	DESCRIPTION	"A switchClear1 trap signifies that the switch sensor 1
			has returned to a normal state."
::= 14	
	
switchAlarm2-11e TRAP-TYPE
	ENTERPRISE	roomalert11E
	VARIABLES	{ alarmMessage1, sensor1-2, sensor1-2, sensor1-2 }
	DESCRIPTION	"A switchAlarm2 trap signifies that switch sensor 2
			is in an alarm state."
::= 15
	
switchClear2-11e TRAP-TYPE
	ENTERPRISE	roomalert11E
	VARIABLES	{ alarmMessage1, sensor1-2, sensor1-2, sensor1-2 }
	DESCRIPTION	"A switchClear2 trap signifies that the switch sensor 2
			has returned to a normal state."
::= 16	
	
switchAlarm3-11e TRAP-TYPE
	ENTERPRISE	roomalert11E
	VARIABLES	{ alarmMessage1, sensor1-3, sensor1-3, sensor1-3 }
	DESCRIPTION	"A switchAlarm1 trap signifies that switch sensor 1
			is in an alarm state."
::= 17
	
switchClear3-11e TRAP-TYPE
	ENTERPRISE	roomalert11E
	VARIABLES	{ alarmMessage1, sensor1-3, sensor1-3, sensor1-3 }
	DESCRIPTION	"A switchClear3 trap signifies that the switch sensor 3
			has returned to a normal state."
::= 18	
	
switchAlarm4-11e TRAP-TYPE
	ENTERPRISE	roomalert11E
	VARIABLES	{ alarmMessage1, sensor1-4, sensor1-4, sensor1-4 }
	DESCRIPTION	"A switchAlarm4 trap signifies that switch sensor 4
			is in an alarm state."
::= 19
	
switchClear4-11e TRAP-TYPE
	ENTERPRISE	roomalert11E
	VARIABLES	{ alarmMessage1, sensor1-4, sensor1-4, sensor1-4 }
	DESCRIPTION	"A switchClear4 trap signifies that the switch sensor 4
			has returned to a normal state."
::= 20	
	
switchAlarm5-11e TRAP-TYPE
	ENTERPRISE	roomalert11E
	VARIABLES	{ alarmMessage1, sensor1-5, sensor1-5, sensor1-5 }
	DESCRIPTION	"A switchAlarm5 trap signifies that switch sensor 5
			is in an alarm state."
::= 21
	
switchClear5-11e TRAP-TYPE
	ENTERPRISE	roomalert11E
	VARIABLES	{ alarmMessage1, sensor1-5, sensor1-5, sensor1-5 }
	DESCRIPTION	"A switchClear5 trap signifies that the switch sensor 5
			has returned to a normal state."
::= 22	
	
switchAlarm6-11e TRAP-TYPE
	ENTERPRISE	roomalert11E
	VARIABLES	{ alarmMessage1, sensor1-6, sensor1-6, sensor1-6 }
	DESCRIPTION	"A switchAlarm6 trap signifies that switch sensor 6
			is in an alarm state."
::= 23
	
switchClear6-11e TRAP-TYPE
	ENTERPRISE	roomalert11E
	VARIABLES	{ alarmMessage1, sensor1-6, sensor1-6, sensor1-6 }
	DESCRIPTION	"A switchClear6 trap signifies that the switch sensor 6
			has returned to a normal state."
::= 24	
	
switchAlarm7-11e TRAP-TYPE
	ENTERPRISE	roomalert11E
	VARIABLES	{ alarmMessage1, sensor1-7, sensor1-7, sensor1-7 }
	DESCRIPTION	"A switchAlarm7 trap signifies that switch sensor 7
			is in an alarm state."
::= 25
	
switchClear7-11e TRAP-TYPE
	ENTERPRISE	roomalert11E
	VARIABLES	{ alarmMessage1, sensor1-7, sensor1-7, sensor1-7 }
	DESCRIPTION	"A switchClear7 trap signifies that the switch sensor 7
			has returned to a normal state."
::= 26	
	
switchAlarm8-11e TRAP-TYPE
	ENTERPRISE	roomalert11E
	VARIABLES	{ alarmMessage1, sensor1-8, sensor1-8, sensor1-8 }
	DESCRIPTION	"A switchAlarm8 trap signifies that switch sensor 8
			is in an alarm state."
::= 27
	
switchClear8-11e TRAP-TYPE
	ENTERPRISE	roomalert11E
	VARIABLES	{ alarmMessage1, sensor1-8, sensor1-8, sensor1-8 }
	DESCRIPTION	"A switchClear8 trap signifies that the switch sensor 8
			has returned to a normal state."
::= 28		
END