mirror/librenms-librenms
1
0
Fork 0
mirror of https://github.com/librenms/librenms.git synced 2024-10-07 16:52:45 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
Files
1c526bb584ee409fe7dc9eb2f7e37e919d704dfd
librenms-librenms/mibs/ARECA-SNMP-MIB

4224 lines
94 KiB
Plaintext
Raw Normal View History

compiled areca mibs, tearing hair out, who knows what this brings or does anyway. git-svn-id: http://www.observium.org/svn/observer/trunk@3024 61d68cd4-352d-0410-923a-c4978735b2b8
2012-04-11 17:04:12 +00:00
ARECA-SNMP-MIB DEFINITIONS ::= BEGIN
-- This was compiled from the following Areca files by Tom Laermans
-- <tom.laermans@powersource.cx> for Observium <www.observium.org>
-- The MIBs are an absolute MESS.
IMPORTS
enterprises
FROM RFC1155-SMI;
-- the path to the root
--internet OBJECT IDENTIFIER ::= { iso org(3) dod(6) 1 }
--directory OBJECT IDENTIFIER ::= { internet 1 }
--mgmt OBJECT IDENTIFIER ::= { internet 2 }
--experimental OBJECT IDENTIFIER ::= { internet 3 }
--private OBJECT IDENTIFIER ::= { internet 4 }
--enterprises OBJECT IDENTIFIER ::= { private 1 }
Areca OBJECT IDENTIFIER ::= { enterprises 18928 }
ArecaGroup1 OBJECT IDENTIFIER ::= { Areca 1 }
SASRaidSubsystem OBJECT IDENTIFIER ::= { ArecaGroup1 2 }
SystemInformation OBJECT IDENTIFIER ::= { SASRaidSubsystem 1 }
HW_Monitor OBJECT IDENTIFIER ::= { SASRaidSubsystem 2 }
HddInformation OBJECT IDENTIFIER ::= { SASRaidSubsystem 3 }
RaidsetInformation OBJECT IDENTIFIER ::= { SASRaidSubsystem 4 }
VolumesetInformation OBJECT IDENTIFIER ::= { SASRaidSubsystem 5 }
EventInformation OBJECT IDENTIFIER ::= { SASRaidSubsystem 6 }
-- definition of object types
-- definition of object types of system information
siVendor OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The vendor name of raid subsystem."
::= { SystemInformation 1 }
siModel OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The model name of raid subsystem."
::= { SystemInformation 2 }
siSerial OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The serial number of raid subsystem."
::= { SystemInformation 3 }
siFirmVer OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The firmware version of raid subsystem."
::= { SystemInformation 4 }
siBootVer OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Boot version of raid subsystem."
::= { SystemInformation 5 }
siMbrVer OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The master boot record version of raid subsystem."
::= { SystemInformation 6 }
siProcessor OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The processor name of raid subsystem."
::= { SystemInformation 7 }
siCpuSpeed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The CPU speed (in MHZ, e.g. 400) of Raid subsystem."
::= { SystemInformation 8 }
siICache OBJECT-TYPE
SYNTAX INTEGER {
32K(32768)
512K(524288)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The CPU internal Instruction cache size (in bytes, e.g. 32768) of Raid subsystem."
::= { SystemInformation 9 }
siDCache OBJECT-TYPE
SYNTAX INTEGER {
32K(32768)
512K(524288)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The CPU interanl data cache size (in bytes, e.g. 32768) of Raid subsystem."
::= { SystemInformation 10 }
siSCache OBJECT-TYPE
SYNTAX INTEGER {
32K(32768)
512K(524288)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The CPU secondary cache size (in bytes, e.g. 32768) of Raid subsystem."
::= { SystemInformation 11 }
siMemory OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The memory size (in MB, e.g. 128) of Raid subsystem."
::= { SystemInformation 12 }
siMemSpeed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The memory speed (in MHz) of Raid subsystem."
::= { SystemInformation 13 }
siEcc OBJECT-TYPE
SYNTAX INTEGER{
No(0),
Yes(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The sdram ECC capability of Raid subsystem (0:no ECC, 1:ECC)."
::= { SystemInformation 14 }
siHosts OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of host channels, e.g. 2."
::= { SystemInformation 15 }
siRaidSets OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of RAIDSET supported, e.g. 16."
::= { SystemInformation 16 }
siVolumeSets OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of VOLUMESET supported, e.g. 16."
::= { SystemInformation 17 }
siEvents OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of events supported, e.g. 16."
::= { SystemInformation 18 }
siRaid6 OBJECT-TYPE
SYNTAX INTEGER {
No(0),
Yes(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"0:no RAID6, 1:RAID6."
::= { SystemInformation 19 }
siDhcp OBJECT-TYPE
SYNTAX INTEGER {
Disabled(0),
Enabled(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"0:disabled, 1:enabled."
::= { SystemInformation 20 }
siBeeper OBJECT-TYPE
SYNTAX INTEGER {
Disabled(0),
Enabled(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"0:disabled, 1:enabled."
::= { SystemInformation 21 }
siUsage OBJECT-TYPE
SYNTAX INTEGER {
Normal(0),
JBOD(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"0:normal, 1:JBOD."
::= { SystemInformation 22 }
siRebuildRate OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"5,20,50,80 in %."
::= { SystemInformation 23 }
siBaudRate OBJECT-TYPE
SYNTAX INTEGER {
1200bps(1200),
2400bps(2400),
4800bps(4800),
9600bps(9600),
19200bps(19200),
38400bps(38400),
57600bps(57600),
115200bps(115200)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"1200,2400,4800,9600,19200,38400,57600,115200."
::= { SystemInformation 24 }
-- definition of object types of H/W monitor
ControllerBoard OBJECT IDENTIFIER ::= { HW_Monitor 1 }
HwEnclosure1 OBJECT IDENTIFIER ::= { HW_Monitor 2 }
HwEnclosure2 OBJECT IDENTIFIER ::= { HW_Monitor 3 }
HwEnclosure3 OBJECT IDENTIFIER ::= { HW_Monitor 4 }
HwEnclosure4 OBJECT IDENTIFIER ::= { HW_Monitor 5 }
HwEnclosure5 OBJECT IDENTIFIER ::= { HW_Monitor 6 }
HwEnclosure6 OBJECT IDENTIFIER ::= { HW_Monitor 7 }
HwEnclosure7 OBJECT IDENTIFIER ::= { HW_Monitor 8 }
HwEnclosure8 OBJECT IDENTIFIER ::= { HW_Monitor 9 }
-- Controller Board
hwControllerBoardInstalled OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Enclosure Installed?"
::= { ControllerBoard 1 }
hwControllerBoardDescription OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Enclosure description."
::= { ControllerBoard 2 }
hwControllerBoardNumberOfPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"# of power supply, e.g. 2."
::= { ControllerBoard 3 }
hwControllerBoardNumberOfVol OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"# of Voltage, e.g. 2."
::= { ControllerBoard 4 }
hwControllerBoardNumberOfFan OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"# of Fan, e.g. 2."
::= { ControllerBoard 5 }
hwControllerBoardNumberOfTemp OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"# of Temperature, e.g. 2."
::= { ControllerBoard 6 }
hwControllerBoardPowerTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwPowerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table containing Power information."
::= { ControllerBoard 7 }
hwControllerBoardPowerEntry OBJECT-TYPE
SYNTAX HwControllerBoardPowerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information about a particular current power state."
INDEX { hwControllerBoardPowerIndex }
::= { hwControllerBoardPowerTable 1 }
HwControllerBoardPowerEntry ::= SEQUENCE { hwControllerBoardPowerIndex INTEGER,
hwControllerBoardPowerDesc DisplayString,
hwControllerBoardPowerState INTEGER }
hwControllerBoardPowerIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Power index, 1..#of powers."
::= { hwControllerBoardPowerEntry 1 }
hwControllerBoardPowerDesc OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Power description."
::= { hwControllerBoardPowerEntry 2 }
hwControllerBoardPowerState OBJECT-TYPE
SYNTAX INTEGER {
Failed(0),
Ok(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Power state 0:failed, 1:ok."
::= { hwControllerBoardPowerEntry 3 }
hwControllerBoardVolTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwControllerBoardVolEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table containing voltage information."
::= { ControllerBoard 8 }
hwControllerBoardVolEntry OBJECT-TYPE
SYNTAX HwControllerBoardVolEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information about a particular current voltage state."
INDEX { hwControllerBoardVolIndex }
::= { hwControllerBoardVolTable 1 }
HwControllerBoardVolEntry ::= SEQUENCE { hwControllerBoardVolIndex INTEGER,
hwControllerBoardVolDesc DisplayString,
hwControllerBoardVolValue INTEGER }
hwControllerBoardVolIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage index, 1..#of voltages."
::= { hwControllerBoardVolEntry 1 }
hwControllerBoardVolDesc OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage description."
::= { hwControllerBoardVolEntry 2 }
hwControllerBoardVolValue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage value."
::= { hwControllerBoardVolEntry 3 }
hwControllerBoardFanTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwControllerBoardFanEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table containing Fan information."
::= { ControllerBoard 9 }
hwControllerBoardFanEntry OBJECT-TYPE
SYNTAX HwControllerBoardFanEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information about a particular current fan state."
INDEX { hwControllerBoardFanIndex }
::= { hwControllerBoardFanTable 1 }
HwControllerBoardFanEntry ::= SEQUENCE { hwControllerBoardFanIndex INTEGER,
hwControllerBoardFanDesc DisplayString,
hwControllerBoardFanSpeed INTEGER }
hwControllerBoardFanIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Fan index, 1..#of fans."
::= { hwControllerBoardFanEntry 1 }
hwControllerBoardFanDesc OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Fan description."
::= { hwControllerBoardFanEntry 2 }
hwControllerBoardFanSpeed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Fan speed in RPM, e.g. 3200."
::= { hwControllerBoardFanEntry 3 }
hwControllerBoardTempTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwControllerBoardTempEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table containing temperature information."
::= { ControllerBoard 10 }
hwControllerBoardTempEntry OBJECT-TYPE
SYNTAX HwControllerBoardTempEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information about a particular current temperature state."
INDEX { hwControllerBoardTempIndex }
::= { hwControllerBoardTempTable 1 }
HwControllerBoardTempEntry ::= SEQUENCE { hwControllerBoardTempIndex INTEGER,
hwControllerBoardTempDesc DisplayString,
hwControllerBoardTempValue INTEGER
}
hwControllerBoardTempIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Temperature index, 1..#of voltages."
::= { hwControllerBoardTempEntry 1 }
hwControllerBoardTempDesc OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Temperature description."
::= { hwControllerBoardTempEntry 2 }
hwControllerBoardTempValue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Temperature value."
::= { hwControllerBoardTempEntry 3 }
-- Enclosure#01
hwEnclosure01Installed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Enclosure Installed?"
::= { HwEnclosure1 1 }
hwEnclosure01Description OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Enclosure description."
::= { HwEnclosure1 2 }
hwEnclosure01NumberOfPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"# of power supply, e.g. 2."
::= { HwEnclosure1 3 }
hwEnclosure01NumberOfVol OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"# of Voltage, e.g. 2."
::= { HwEnclosure1 4 }
hwEnclosure01NumberOfFan OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"# of Fan, e.g. 2."
::= { HwEnclosure1 5 }
hwEnclosure01NumberOfTemp OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"# of Temperature, e.g. 2."
::= { HwEnclosure1 6 }
hwEnclosure01PowerTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwPowerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table containing Power information."
::= { HwEnclosure1 7 }
hwEnclosure01PowerEntry OBJECT-TYPE
SYNTAX HwEnclosure01PowerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information about a particular current power state."
INDEX { hwEnclosure01PowerIndex }
::= { hwEnclosure01PowerTable 1 }
HwEnclosure01PowerEntry ::= SEQUENCE { hwEnclosure01PowerIndex INTEGER,
hwEnclosure01PowerDesc DisplayString,
hwEnclosure01PowerState INTEGER }
hwEnclosure01PowerIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Power index, 1..#of powers."
::= { hwEnclosure01PowerEntry 1 }
hwEnclosure01PowerDesc OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Power description."
::= { hwEnclosure01PowerEntry 2 }
hwEnclosure01PowerState OBJECT-TYPE
SYNTAX INTEGER {
Failed(0),
Ok(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Power state 0:failed, 1:ok."
::= { hwEnclosure01PowerEntry 3 }
hwEnclosure01VolTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwEnclosure01VolEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table containing voltage information."
::= { HwEnclosure1 8 }
hwEnclosure01VolEntry OBJECT-TYPE
SYNTAX HwEnclosure01VolEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information about a particular current voltage state."
INDEX { hwEnclosure01VolIndex }
::= { hwEnclosure01VolTable 1 }
HwEnclosure01VolEntry ::= SEQUENCE { hwEnclosure01VolIndex INTEGER,
hwEnclosure01VolDesc DisplayString,
hwEnclosure01VolValue INTEGER }
hwEnclosure01VolIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage index, 1..#of voltages."
::= { hwEnclosure01VolEntry 1 }
hwEnclosure01VolDesc OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage description."
::= { hwEnclosure01VolEntry 2 }
hwEnclosure01VolValue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage value."
::= { hwEnclosure01VolEntry 3 }
hwEnclosure01FanTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwEnclosure01FanEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table containing Fan information."
::= { HwEnclosure1 9 }
hwEnclosure01FanEntry OBJECT-TYPE
SYNTAX HwEnclosure01FanEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information about a particular current fan state."
INDEX { hwEnclosure01FanIndex }
::= { hwEnclosure01FanTable 1 }
HwEnclosure01FanEntry ::= SEQUENCE { hwEnclosure01FanIndex INTEGER,
hwEnclosure01FanDesc DisplayString,
hwEnclosure01FanSpeed INTEGER }
hwEnclosure01FanIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Fan index, 1..#of fans."
::= { hwEnclosure01FanEntry 1 }
hwEnclosure01FanDesc OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Fan description."
::= { hwEnclosure01FanEntry 2 }
hwEnclosure01FanSpeed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Fan speed in RPM, e.g. 3200."
::= { hwEnclosure01FanEntry 3 }
hwEnclosure01TempTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwEnclosure01TempEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table containing temperature information."
::= { HwEnclosure1 10 }
hwEnclosure01TempEntry OBJECT-TYPE
SYNTAX HwEnclosure01TempEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information about a particular current temperature state."
INDEX { hwEnclosure01TempIndex }
::= { hwEnclosure01TempTable 1 }
HwEnclosure01TempEntry ::= SEQUENCE { hwEnclosure01TempIndex INTEGER,
hwEnclosure01TempDesc DisplayString,
hwEnclosure01TempValue INTEGER
}
hwEnclosure01TempIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Temperature index, 1..#of voltages."
::= { hwEnclosure01TempEntry 1 }
hwEnclosure01TempDesc OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Temperature description."
::= { hwEnclosure01TempEntry 2 }
hwEnclosure01TempValue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Temperature value."
::= { hwEnclosure01TempEntry 3 }
-- Enclosure#02
hwEnclosure02Installed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Enclosure Installed?"
::= { HwEnclosure2 1 }
hwEnclosure02Description OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Enclosure description."
::= { HwEnclosure2 2 }
hwEnclosure02NumberOfPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"# of power supply, e.g. 2."
::= { HwEnclosure2 3 }
hwEnclosure02NumberOfVol OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"# of Voltage, e.g. 2."
::= { HwEnclosure2 4 }
hwEnclosure02NumberOfFan OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"# of Fan, e.g. 2."
::= { HwEnclosure2 5 }
hwEnclosure02NumberOfTemp OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"# of Temperature, e.g. 2."
::= { HwEnclosure2 6 }
hwEnclosure02PowerTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwPowerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table containing Power information."
::= { HwEnclosure2 7 }
hwEnclosure02PowerEntry OBJECT-TYPE
SYNTAX HwEnclosure02PowerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information about a particular current power state."
INDEX { hwEnclosure02PowerIndex }
::= { hwEnclosure02PowerTable 1 }
HwEnclosure02PowerEntry ::= SEQUENCE { hwEnclosure02PowerIndex INTEGER,
hwEnclosure02PowerDesc DisplayString,
hwEnclosure02PowerState INTEGER }
hwEnclosure02PowerIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Power index, 1..#of powers."
::= { hwEnclosure02PowerEntry 1 }
hwEnclosure02PowerDesc OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Power description."
::= { hwEnclosure02PowerEntry 2 }
hwEnclosure02PowerState OBJECT-TYPE
SYNTAX INTEGER {
Failed(0),
Ok(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Power state 0:failed, 1:ok."
::= { hwEnclosure02PowerEntry 3 }
hwEnclosure02VolTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwEnclosure02VolEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table containing voltage information."
::= { HwEnclosure2 8 }
hwEnclosure02VolEntry OBJECT-TYPE
SYNTAX HwEnclosure02VolEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information about a particular current voltage state."
INDEX { hwEnclosure02VolIndex }
::= { hwEnclosure02VolTable 1 }
HwEnclosure02VolEntry ::= SEQUENCE { hwEnclosure02VolIndex INTEGER,
hwEnclosure02VolDesc DisplayString,
hwEnclosure02VolValue INTEGER }
hwEnclosure02VolIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage index, 1..#of voltages."
::= { hwEnclosure02VolEntry 1 }
hwEnclosure02VolDesc OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage description."
::= { hwEnclosure02VolEntry 2 }
hwEnclosure02VolValue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage value."
::= { hwEnclosure02VolEntry 3 }
hwEnclosure02FanTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwEnclosure02FanEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table containing Fan information."
::= { HwEnclosure2 9 }
hwEnclosure02FanEntry OBJECT-TYPE
SYNTAX HwEnclosure02FanEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information about a particular current fan state."
INDEX { hwEnclosure02FanIndex }
::= { hwEnclosure02FanTable 1 }
HwEnclosure02FanEntry ::= SEQUENCE { hwEnclosure02FanIndex INTEGER,
hwEnclosure02FanDesc DisplayString,
hwEnclosure02FanSpeed INTEGER }
hwEnclosure02FanIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Fan index, 1..#of fans."
::= { hwEnclosure02FanEntry 1 }
hwEnclosure02FanDesc OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Fan description."
::= { hwEnclosure02FanEntry 2 }
hwEnclosure02FanSpeed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Fan speed in RPM, e.g. 3200."
::= { hwEnclosure02FanEntry 3 }
hwEnclosure02TempTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwEnclosure02TempEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table containing temperature information."
::= { HwEnclosure2 10 }
hwEnclosure02TempEntry OBJECT-TYPE
SYNTAX HwEnclosure02TempEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information about a particular current temperature state."
INDEX { hwEnclosure02TempIndex }
::= { hwEnclosure02TempTable 1 }
HwEnclosure02TempEntry ::= SEQUENCE { hwEnclosure02TempIndex INTEGER,
hwEnclosure02TempDesc DisplayString,
hwEnclosure02TempValue INTEGER
}
hwEnclosure02TempIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Temperature index, 1..#of voltages."
::= { hwEnclosure02TempEntry 1 }
hwEnclosure02TempDesc OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Temperature description."
::= { hwEnclosure02TempEntry 2 }
hwEnclosure02TempValue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Temperature value."
::= { hwEnclosure02TempEntry 3 }
-- Enclosure#03
hwEnclosure03Installed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Enclosure Installed?"
::= { HwEnclosure3 1 }
hwEnclosure03Description OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Enclosure description."
::= { HwEnclosure3 2 }
hwEnclosure03NumberOfPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"# of power supply, e.g. 2."
::= { HwEnclosure3 3 }
hwEnclosure03NumberOfVol OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"# of Voltage, e.g. 2."
::= { HwEnclosure3 4 }
hwEnclosure03NumberOfFan OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"# of Fan, e.g. 2."
::= { HwEnclosure3 5 }
hwEnclosure03NumberOfTemp OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"# of Temperature, e.g. 2."
::= { HwEnclosure3 6 }
hwEnclosure03PowerTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwPowerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table containing Power information."
::= { HwEnclosure3 7 }
hwEnclosure03PowerEntry OBJECT-TYPE
SYNTAX HwEnclosure03PowerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information about a particular current power state."
INDEX { hwEnclosure03PowerIndex }
::= { hwEnclosure03PowerTable 1 }
HwEnclosure03PowerEntry ::= SEQUENCE { hwEnclosure03PowerIndex INTEGER,
hwEnclosure03PowerDesc DisplayString,
hwEnclosure03PowerState INTEGER }
hwEnclosure03PowerIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Power index, 1..#of powers."
::= { hwEnclosure03PowerEntry 1 }
hwEnclosure03PowerDesc OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Power description."
::= { hwEnclosure03PowerEntry 2 }
hwEnclosure03PowerState OBJECT-TYPE
SYNTAX INTEGER {
Failed(0),
Ok(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Power state 0:failed, 1:ok."
::= { hwEnclosure03PowerEntry 3 }
hwEnclosure03VolTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwEnclosure03VolEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table containing voltage information."
::= { HwEnclosure3 8 }
hwEnclosure03VolEntry OBJECT-TYPE
SYNTAX HwEnclosure03VolEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information about a particular current voltage state."
INDEX { hwEnclosure03VolIndex }
::= { hwEnclosure03VolTable 1 }
HwEnclosure03VolEntry ::= SEQUENCE { hwEnclosure03VolIndex INTEGER,
hwEnclosure03VolDesc DisplayString,
hwEnclosure03VolValue INTEGER }
hwEnclosure03VolIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage index, 1..#of voltages."
::= { hwEnclosure03VolEntry 1 }
hwEnclosure03VolDesc OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage description."
::= { hwEnclosure03VolEntry 2 }
hwEnclosure03VolValue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage value."
::= { hwEnclosure03VolEntry 3 }
hwEnclosure03FanTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwEnclosure03FanEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table containing Fan information."
::= { HwEnclosure3 9 }
hwEnclosure03FanEntry OBJECT-TYPE
SYNTAX HwEnclosure03FanEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information about a particular current fan state."
INDEX { hwEnclosure03FanIndex }
::= { hwEnclosure03FanTable 1 }
HwEnclosure03FanEntry ::= SEQUENCE { hwEnclosure03FanIndex INTEGER,
hwEnclosure03FanDesc DisplayString,
hwEnclosure03FanSpeed INTEGER }
hwEnclosure03FanIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Fan index, 1..#of fans."
::= { hwEnclosure03FanEntry 1 }
hwEnclosure03FanDesc OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Fan description."
::= { hwEnclosure03FanEntry 2 }
hwEnclosure03FanSpeed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Fan speed in RPM, e.g. 3200."
::= { hwEnclosure03FanEntry 3 }
hwEnclosure03TempTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwEnclosure03TempEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table containing temperature information."
::= { HwEnclosure3 10 }
hwEnclosure03TempEntry OBJECT-TYPE
SYNTAX HwEnclosure03TempEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information about a particular current temperature state."
INDEX { hwEnclosure03TempIndex }
::= { hwEnclosure03TempTable 1 }
HwEnclosure03TempEntry ::= SEQUENCE { hwEnclosure03TempIndex INTEGER,
hwEnclosure03TempDesc DisplayString,
hwEnclosure03TempValue INTEGER
}
hwEnclosure03TempIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Temperature index, 1..#of voltages."
::= { hwEnclosure03TempEntry 1 }
hwEnclosure03TempDesc OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Temperature description."
::= { hwEnclosure03TempEntry 2 }
hwEnclosure03TempValue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Temperature value."
::= { hwEnclosure03TempEntry 3 }
-- Enclosure#04
hwEnclosure04Installed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Enclosure Installed?"
::= { HwEnclosure4 1 }
hwEnclosure04Description OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Enclosure description."
::= { HwEnclosure4 2 }
hwEnclosure04NumberOfPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"# of power supply, e.g. 2."
::= { HwEnclosure4 3 }
hwEnclosure04NumberOfVol OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"# of Voltage, e.g. 2."
::= { HwEnclosure4 4 }
hwEnclosure04NumberOfFan OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"# of Fan, e.g. 2."
::= { HwEnclosure4 5 }
hwEnclosure04NumberOfTemp OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"# of Temperature, e.g. 2."
::= { HwEnclosure4 6 }
hwEnclosure04PowerTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwPowerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table containing Power information."
::= { HwEnclosure4 7 }
hwEnclosure04PowerEntry OBJECT-TYPE
SYNTAX HwEnclosure04PowerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information about a particular current power state."
INDEX { hwEnclosure04PowerIndex }
::= { hwEnclosure04PowerTable 1 }
HwEnclosure04PowerEntry ::= SEQUENCE { hwEnclosure04PowerIndex INTEGER,
hwEnclosure04PowerDesc DisplayString,
hwEnclosure04PowerState INTEGER }
hwEnclosure04PowerIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Power index, 1..#of powers."
::= { hwEnclosure04PowerEntry 1 }
hwEnclosure04PowerDesc OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Power description."
::= { hwEnclosure04PowerEntry 2 }
hwEnclosure04PowerState OBJECT-TYPE
SYNTAX INTEGER {
Failed(0),
Ok(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Power state 0:failed, 1:ok."
::= { hwEnclosure04PowerEntry 3 }
hwEnclosure04VolTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwEnclosure04VolEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table containing voltage information."
::= { HwEnclosure4 8 }
hwEnclosure04VolEntry OBJECT-TYPE
SYNTAX HwEnclosure04VolEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information about a particular current voltage state."
INDEX { hwEnclosure04VolIndex }
::= { hwEnclosure04VolTable 1 }
HwEnclosure04VolEntry ::= SEQUENCE { hwEnclosure04VolIndex INTEGER,
hwEnclosure04VolDesc DisplayString,
hwEnclosure04VolValue INTEGER }
hwEnclosure04VolIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage index, 1..#of voltages."
::= { hwEnclosure04VolEntry 1 }
hwEnclosure04VolDesc OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage description."
::= { hwEnclosure04VolEntry 2 }
hwEnclosure04VolValue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage value."
::= { hwEnclosure04VolEntry 3 }
hwEnclosure04FanTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwEnclosure04FanEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table containing Fan information."
::= { HwEnclosure4 9 }
hwEnclosure04FanEntry OBJECT-TYPE
SYNTAX HwEnclosure04FanEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information about a particular current fan state."
INDEX { hwEnclosure04FanIndex }
::= { hwEnclosure04FanTable 1 }
HwEnclosure04FanEntry ::= SEQUENCE { hwEnclosure04FanIndex INTEGER,
hwEnclosure04FanDesc DisplayString,
hwEnclosure04FanSpeed INTEGER }
hwEnclosure04FanIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Fan index, 1..#of fans."
::= { hwEnclosure04FanEntry 1 }
hwEnclosure04FanDesc OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Fan description."
::= { hwEnclosure04FanEntry 2 }
hwEnclosure04FanSpeed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Fan speed in RPM, e.g. 3200."
::= { hwEnclosure04FanEntry 3 }
hwEnclosure04TempTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwEnclosure04TempEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table containing temperature information."
::= { HwEnclosure4 10 }
hwEnclosure04TempEntry OBJECT-TYPE
SYNTAX HwEnclosure04TempEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information about a particular current temperature state."
INDEX { hwEnclosure04TempIndex }
::= { hwEnclosure04TempTable 1 }
HwEnclosure04TempEntry ::= SEQUENCE { hwEnclosure04TempIndex INTEGER,
hwEnclosure04TempDesc DisplayString,
hwEnclosure04TempValue INTEGER
}
hwEnclosure04TempIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Temperature index, 1..#of voltages."
::= { hwEnclosure04TempEntry 1 }
hwEnclosure04TempDesc OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Temperature description."
::= { hwEnclosure04TempEntry 2 }
hwEnclosure04TempValue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Temperature value."
::= { hwEnclosure04TempEntry 3 }
-- Enclosure#05
hwEnclosure05Installed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Enclosure Installed?"
::= { HwEnclosure5 1 }
hwEnclosure05Description OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Enclosure description."
::= { HwEnclosure5 2 }
hwEnclosure05NumberOfPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"# of power supply, e.g. 2."
::= { HwEnclosure5 3 }
hwEnclosure05NumberOfVol OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"# of Voltage, e.g. 2."
::= { HwEnclosure5 4 }
hwEnclosure05NumberOfFan OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"# of Fan, e.g. 2."
::= { HwEnclosure5 5 }
hwEnclosure05NumberOfTemp OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"# of Temperature, e.g. 2."
::= { HwEnclosure5 6 }
hwEnclosure05PowerTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwPowerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table containing Power information."
::= { HwEnclosure5 7 }
hwEnclosure05PowerEntry OBJECT-TYPE
SYNTAX HwEnclosure05PowerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information about a particular current power state."
INDEX { hwEnclosure05PowerIndex }
::= { hwEnclosure05PowerTable 1 }
HwEnclosure05PowerEntry ::= SEQUENCE { hwEnclosure05PowerIndex INTEGER,
hwEnclosure05PowerDesc DisplayString,
hwEnclosure05PowerState INTEGER }
hwEnclosure05PowerIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Power index, 1..#of powers."
::= { hwEnclosure05PowerEntry 1 }
hwEnclosure05PowerDesc OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Power description."
::= { hwEnclosure05PowerEntry 2 }
hwEnclosure05PowerState OBJECT-TYPE
SYNTAX INTEGER {
Failed(0),
Ok(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Power state 0:failed, 1:ok."
::= { hwEnclosure05PowerEntry 3 }
hwEnclosure05VolTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwEnclosure05VolEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table containing voltage information."
::= { HwEnclosure5 8 }
hwEnclosure05VolEntry OBJECT-TYPE
SYNTAX HwEnclosure05VolEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information about a particular current voltage state."
INDEX { hwEnclosure05VolIndex }
::= { hwEnclosure05VolTable 1 }
HwEnclosure05VolEntry ::= SEQUENCE { hwEnclosure05VolIndex INTEGER,
hwEnclosure05VolDesc DisplayString,
hwEnclosure05VolValue INTEGER }
hwEnclosure05VolIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage index, 1..#of voltages."
::= { hwEnclosure05VolEntry 1 }
hwEnclosure05VolDesc OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage description."
::= { hwEnclosure05VolEntry 2 }
hwEnclosure05VolValue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage value."
::= { hwEnclosure05VolEntry 3 }
hwEnclosure05FanTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwEnclosure05FanEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table containing Fan information."
::= { HwEnclosure5 9 }
hwEnclosure05FanEntry OBJECT-TYPE
SYNTAX HwEnclosure05FanEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information about a particular current fan state."
INDEX { hwEnclosure05FanIndex }
::= { hwEnclosure05FanTable 1 }
HwEnclosure05FanEntry ::= SEQUENCE { hwEnclosure05FanIndex INTEGER,
hwEnclosure05FanDesc DisplayString,
hwEnclosure05FanSpeed INTEGER }
hwEnclosure05FanIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Fan index, 1..#of fans."
::= { hwEnclosure05FanEntry 1 }
hwEnclosure05FanDesc OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Fan description."
::= { hwEnclosure05FanEntry 2 }
hwEnclosure05FanSpeed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Fan speed in RPM, e.g. 3200."
::= { hwEnclosure05FanEntry 3 }
hwEnclosure05TempTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwEnclosure05TempEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table containing temperature information."
::= { HwEnclosure5 10 }
hwEnclosure05TempEntry OBJECT-TYPE
SYNTAX HwEnclosure05TempEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information about a particular current temperature state."
INDEX { hwEnclosure05TempIndex }
::= { hwEnclosure05TempTable 1 }
HwEnclosure05TempEntry ::= SEQUENCE { hwEnclosure05TempIndex INTEGER,
hwEnclosure05TempDesc DisplayString,
hwEnclosure05TempValue INTEGER
}
hwEnclosure05TempIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Temperature index, 1..#of voltages."
::= { hwEnclosure05TempEntry 1 }
hwEnclosure05TempDesc OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Temperature description."
::= { hwEnclosure05TempEntry 2 }
hwEnclosure05TempValue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Temperature value."
::= { hwEnclosure05TempEntry 3 }
-- Enclosure#06
hwEnclosure06Installed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Enclosure Installed?"
::= { HwEnclosure6 1 }
hwEnclosure06Description OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Enclosure description."
::= { HwEnclosure6 2 }
hwEnclosure06NumberOfPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"# of power supply, e.g. 2."
::= { HwEnclosure6 3 }
hwEnclosure06NumberOfVol OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"# of Voltage, e.g. 2."
::= { HwEnclosure6 4 }
hwEnclosure06NumberOfFan OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"# of Fan, e.g. 2."
::= { HwEnclosure6 5 }
hwEnclosure06NumberOfTemp OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"# of Temperature, e.g. 2."
::= { HwEnclosure6 6 }
hwEnclosure06PowerTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwPowerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table containing Power information."
::= { HwEnclosure6 7 }
hwEnclosure06PowerEntry OBJECT-TYPE
SYNTAX HwEnclosure06PowerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information about a particular current power state."
INDEX { hwEnclosure06PowerIndex }
::= { hwEnclosure06PowerTable 1 }
HwEnclosure06PowerEntry ::= SEQUENCE { hwEnclosure06PowerIndex INTEGER,
hwEnclosure06PowerDesc DisplayString,
hwEnclosure06PowerState INTEGER }
hwEnclosure06PowerIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Power index, 1..#of powers."
::= { hwEnclosure06PowerEntry 1 }
hwEnclosure06PowerDesc OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Power description."
::= { hwEnclosure06PowerEntry 2 }
hwEnclosure06PowerState OBJECT-TYPE
SYNTAX INTEGER {
Failed(0),
Ok(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Power state 0:failed, 1:ok."
::= { hwEnclosure06PowerEntry 3 }
hwEnclosure06VolTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwEnclosure06VolEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table containing voltage information."
::= { HwEnclosure6 8 }
hwEnclosure06VolEntry OBJECT-TYPE
SYNTAX HwEnclosure06VolEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information about a particular current voltage state."
INDEX { hwEnclosure06VolIndex }
::= { hwEnclosure06VolTable 1 }
HwEnclosure06VolEntry ::= SEQUENCE { hwEnclosure06VolIndex INTEGER,
hwEnclosure06VolDesc DisplayString,
hwEnclosure06VolValue INTEGER }
hwEnclosure06VolIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage index, 1..#of voltages."
::= { hwEnclosure06VolEntry 1 }
hwEnclosure06VolDesc OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage description."
::= { hwEnclosure06VolEntry 2 }
hwEnclosure06VolValue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage value."
::= { hwEnclosure06VolEntry 3 }
hwEnclosure06FanTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwEnclosure06FanEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table containing Fan information."
::= { HwEnclosure6 9 }
hwEnclosure06FanEntry OBJECT-TYPE
SYNTAX HwEnclosure06FanEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information about a particular current fan state."
INDEX { hwEnclosure06FanIndex }
::= { hwEnclosure06FanTable 1 }
HwEnclosure06FanEntry ::= SEQUENCE { hwEnclosure06FanIndex INTEGER,
hwEnclosure06FanDesc DisplayString,
hwEnclosure06FanSpeed INTEGER }
hwEnclosure06FanIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Fan index, 1..#of fans."
::= { hwEnclosure06FanEntry 1 }
hwEnclosure06FanDesc OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Fan description."
::= { hwEnclosure06FanEntry 2 }
hwEnclosure06FanSpeed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Fan speed in RPM, e.g. 3200."
::= { hwEnclosure06FanEntry 3 }
hwEnclosure06TempTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwEnclosure06TempEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table containing temperature information."
::= { HwEnclosure6 10 }
hwEnclosure06TempEntry OBJECT-TYPE
SYNTAX HwEnclosure06TempEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information about a particular current temperature state."
INDEX { hwEnclosure06TempIndex }
::= { hwEnclosure06TempTable 1 }
HwEnclosure06TempEntry ::= SEQUENCE { hwEnclosure06TempIndex INTEGER,
hwEnclosure06TempDesc DisplayString,
hwEnclosure06TempValue INTEGER
}
hwEnclosure06TempIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Temperature index, 1..#of voltages."
::= { hwEnclosure06TempEntry 1 }
hwEnclosure06TempDesc OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Temperature description."
::= { hwEnclosure06TempEntry 2 }
hwEnclosure06TempValue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Temperature value."
::= { hwEnclosure06TempEntry 3 }
-- Enclosure#07
hwEnclosure07Installed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Enclosure Installed?"
::= { HwEnclosure7 1 }
hwEnclosure07Description OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Enclosure description."
::= { HwEnclosure7 2 }
hwEnclosure07NumberOfPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"# of power supply, e.g. 2."
::= { HwEnclosure7 3 }
hwEnclosure07NumberOfVol OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"# of Voltage, e.g. 2."
::= { HwEnclosure7 4 }
hwEnclosure07NumberOfFan OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"# of Fan, e.g. 2."
::= { HwEnclosure7 5 }
hwEnclosure07NumberOfTemp OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"# of Temperature, e.g. 2."
::= { HwEnclosure7 6 }
hwEnclosure07PowerTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwPowerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table containing Power information."
::= { HwEnclosure7 7 }
hwEnclosure07PowerEntry OBJECT-TYPE
SYNTAX HwEnclosure07PowerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information about a particular current power state."
INDEX { hwEnclosure07PowerIndex }
::= { hwEnclosure07PowerTable 1 }
HwEnclosure07PowerEntry ::= SEQUENCE { hwEnclosure07PowerIndex INTEGER,
hwEnclosure07PowerDesc DisplayString,
hwEnclosure07PowerState INTEGER }
hwEnclosure07PowerIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Power index, 1..#of powers."
::= { hwEnclosure07PowerEntry 1 }
hwEnclosure07PowerDesc OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Power description."
::= { hwEnclosure07PowerEntry 2 }
hwEnclosure07PowerState OBJECT-TYPE
SYNTAX INTEGER {
Failed(0),
Ok(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Power state 0:failed, 1:ok."
::= { hwEnclosure07PowerEntry 3 }
hwEnclosure07VolTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwEnclosure07VolEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table containing voltage information."
::= { HwEnclosure7 8 }
hwEnclosure07VolEntry OBJECT-TYPE
SYNTAX HwEnclosure07VolEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information about a particular current voltage state."
INDEX { hwEnclosure07VolIndex }
::= { hwEnclosure07VolTable 1 }
HwEnclosure07VolEntry ::= SEQUENCE { hwEnclosure07VolIndex INTEGER,
hwEnclosure07VolDesc DisplayString,
hwEnclosure07VolValue INTEGER }
hwEnclosure07VolIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage index, 1..#of voltages."
::= { hwEnclosure07VolEntry 1 }
hwEnclosure07VolDesc OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage description."
::= { hwEnclosure07VolEntry 2 }
hwEnclosure07VolValue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage value."
::= { hwEnclosure07VolEntry 3 }
hwEnclosure07FanTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwEnclosure07FanEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table containing Fan information."
::= { HwEnclosure7 9 }
hwEnclosure07FanEntry OBJECT-TYPE
SYNTAX HwEnclosure07FanEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information about a particular current fan state."
INDEX { hwEnclosure07FanIndex }
::= { hwEnclosure07FanTable 1 }
HwEnclosure07FanEntry ::= SEQUENCE { hwEnclosure07FanIndex INTEGER,
hwEnclosure07FanDesc DisplayString,
hwEnclosure07FanSpeed INTEGER }
hwEnclosure07FanIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Fan index, 1..#of fans."
::= { hwEnclosure07FanEntry 1 }
hwEnclosure07FanDesc OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Fan description."
::= { hwEnclosure07FanEntry 2 }
hwEnclosure07FanSpeed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Fan speed in RPM, e.g. 3200."
::= { hwEnclosure07FanEntry 3 }
hwEnclosure07TempTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwEnclosure07TempEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table containing temperature information."
::= { HwEnclosure7 10 }
hwEnclosure07TempEntry OBJECT-TYPE
SYNTAX HwEnclosure07TempEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information about a particular current temperature state."
INDEX { hwEnclosure07TempIndex }
::= { hwEnclosure07TempTable 1 }
HwEnclosure07TempEntry ::= SEQUENCE { hwEnclosure07TempIndex INTEGER,
hwEnclosure07TempDesc DisplayString,
hwEnclosure07TempValue INTEGER
}
hwEnclosure07TempIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Temperature index, 1..#of voltages."
::= { hwEnclosure07TempEntry 1 }
hwEnclosure07TempDesc OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Temperature description."
::= { hwEnclosure07TempEntry 2 }
hwEnclosure07TempValue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Temperature value."
::= { hwEnclosure07TempEntry 3 }
-- Enclosure#08
hwEnclosure08Installed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Enclosure Installed?"
::= { HwEnclosure8 1 }
hwEnclosure08Description OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Enclosure description."
::= { HwEnclosure8 2 }
hwEnclosure08NumberOfPower OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"# of power supply, e.g. 2."
::= { HwEnclosure8 3 }
hwEnclosure08NumberOfVol OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"# of Voltage, e.g. 2."
::= { HwEnclosure8 4 }
hwEnclosure08NumberOfFan OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"# of Fan, e.g. 2."
::= { HwEnclosure8 5 }
hwEnclosure08NumberOfTemp OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"# of Temperature, e.g. 2."
::= { HwEnclosure8 6 }
hwEnclosure08PowerTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwPowerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table containing Power information."
::= { HwEnclosure8 7 }
hwEnclosure08PowerEntry OBJECT-TYPE
SYNTAX HwEnclosure08PowerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information about a particular current power state."
INDEX { hwEnclosure08PowerIndex }
::= { hwEnclosure08PowerTable 1 }
HwEnclosure08PowerEntry ::= SEQUENCE { hwEnclosure08PowerIndex INTEGER,
hwEnclosure08PowerDesc DisplayString,
hwEnclosure08PowerState INTEGER }
hwEnclosure08PowerIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Power index, 1..#of powers."
::= { hwEnclosure08PowerEntry 1 }
hwEnclosure08PowerDesc OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Power description."
::= { hwEnclosure08PowerEntry 2 }
hwEnclosure08PowerState OBJECT-TYPE
SYNTAX INTEGER {
Failed(0),
Ok(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Power state 0:failed, 1:ok."
::= { hwEnclosure08PowerEntry 3 }
hwEnclosure08VolTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwEnclosure08VolEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table containing voltage information."
::= { HwEnclosure8 8 }
hwEnclosure08VolEntry OBJECT-TYPE
SYNTAX HwEnclosure08VolEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information about a particular current voltage state."
INDEX { hwEnclosure08VolIndex }
::= { hwEnclosure08VolTable 1 }
HwEnclosure08VolEntry ::= SEQUENCE { hwEnclosure08VolIndex INTEGER,
hwEnclosure08VolDesc DisplayString,
hwEnclosure08VolValue INTEGER }
hwEnclosure08VolIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage index, 1..#of voltages."
::= { hwEnclosure08VolEntry 1 }
hwEnclosure08VolDesc OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage description."
::= { hwEnclosure08VolEntry 2 }
hwEnclosure08VolValue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Voltage value."
::= { hwEnclosure08VolEntry 3 }
hwEnclosure08FanTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwEnclosure08FanEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table containing Fan information."
::= { HwEnclosure8 9 }
hwEnclosure08FanEntry OBJECT-TYPE
SYNTAX HwEnclosure08FanEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information about a particular current fan state."
INDEX { hwEnclosure08FanIndex }
::= { hwEnclosure08FanTable 1 }
HwEnclosure08FanEntry ::= SEQUENCE { hwEnclosure08FanIndex INTEGER,
hwEnclosure08FanDesc DisplayString,
hwEnclosure08FanSpeed INTEGER }
hwEnclosure08FanIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Fan index, 1..#of fans."
::= { hwEnclosure08FanEntry 1 }
hwEnclosure08FanDesc OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Fan description."
::= { hwEnclosure08FanEntry 2 }
hwEnclosure08FanSpeed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Fan speed in RPM, e.g. 3200."
::= { hwEnclosure08FanEntry 3 }
hwEnclosure08TempTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwEnclosure08TempEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table containing temperature information."
::= { HwEnclosure8 10 }
hwEnclosure08TempEntry OBJECT-TYPE
SYNTAX HwEnclosure08TempEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information about a particular current temperature state."
INDEX { hwEnclosure08TempIndex }
::= { hwEnclosure08TempTable 1 }
HwEnclosure08TempEntry ::= SEQUENCE { hwEnclosure08TempIndex INTEGER,
hwEnclosure08TempDesc DisplayString,
hwEnclosure08TempValue INTEGER
}
hwEnclosure08TempIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Temperature index, 1..#of voltages."
::= { hwEnclosure08TempEntry 1 }
hwEnclosure08TempDesc OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Temperature description."
::= { hwEnclosure08TempEntry 2 }
hwEnclosure08TempValue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Temperature value."
::= { hwEnclosure08TempEntry 3 }
-- definition of object types of HDD information
HddEnclosure1 OBJECT IDENTIFIER ::= { HddInformation 1 }
HddEnclosure2 OBJECT IDENTIFIER ::= { HddInformation 2 }
HddEnclosure3 OBJECT IDENTIFIER ::= { HddInformation 3 }
HddEnclosure4 OBJECT IDENTIFIER ::= { HddInformation 4 }
HddEnclosure5 OBJECT IDENTIFIER ::= { HddInformation 5 }
HddEnclosure6 OBJECT IDENTIFIER ::= { HddInformation 6 }
HddEnclosure7 OBJECT IDENTIFIER ::= { HddInformation 7 }
HddEnclosure8 OBJECT IDENTIFIER ::= { HddInformation 8 }
-- Enclosure#01 hdd info
hddEnclosure01Installed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Enclosure Installed?"
::= { HddEnclosure1 1 }
hddEnclosure01Description OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Enclosure description."
::= { HddEnclosure1 2 }
hddEnclosure01NumberOfSlot OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"# of slot"
::= { HddEnclosure1 3 }
hddEnclosure01InfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF HddEnclosure01InfoEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table containing HDD information."
::= { HddEnclosure1 4 }
hddEnclosure01InfoEntry OBJECT-TYPE
SYNTAX HddEnclosure01InfoEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information about a particular current HDD state."
INDEX { hddEnclosure01Slots }
::= { hddEnclosure01InfoTable 1 }
HddEnclosure01InfoEntry ::= SEQUENCE { hddEnclosure01Slots INTEGER,
hddEnclosure01Desc DisplayString,
hddEnclosure01Name DisplayString,
hddEnclosure01Serial DisplayString,
hddEnclosure01FirmVer DisplayString,
hddEnclosure01Capacity INTEGER,
hddEnclosure01Type INTEGER,
hddEnclosure01State DisplayString }
hddEnclosure01Slots OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"HDD slot#, 1..#of HDD."
::= { hddEnclosure01InfoEntry 1 }
hddEnclosure01Desc OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"HDD description."
::= { hddEnclosure01InfoEntry 2 }
hddEnclosure01Name OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"HDD name."
::= { hddEnclosure01InfoEntry 3 }
hddEnclosure01Serial OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"HDD serial number."
::= { hddEnclosure01InfoEntry 4 }
hddEnclosure01FirmVer OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"HDD firmware reversion."
::= { hddEnclosure01InfoEntry 5 }
hddEnclosure01Capacity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"HDD total capacity in mega byte."
::= { hddEnclosure01InfoEntry 6 }
hddEnclosure01Type OBJECT-TYPE
SYNTAX INTEGER {
SATA(1),
SAS(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"HDD Type."
::= { hddEnclosure01InfoEntry 7 }
hddEnclosure01State OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"HDD state."
::= { hddEnclosure01InfoEntry 8 }
-- Enclosure#02 hdd info
hddEnclosure02Installed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Enclosure Installed?"
::= { HddEnclosure2 1 }
hddEnclosure02Description OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Enclosure description."
::= { HddEnclosure2 2 }
hddEnclosure02NumberOfSlot OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"# of slot."
::= { HddEnclosure2 3 }
hddEnclosure02InfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF HddEnclosure02InfoEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table containing HDD information."
::= { HddEnclosure2 4 }
hddEnclosure02InfoEntry OBJECT-TYPE
SYNTAX HddEnclosure02InfoEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information about a particular current HDD state."
INDEX { hddEnclosure02Slots }
::= { hddEnclosure02InfoTable 1 }
HddEnclosure02InfoEntry ::= SEQUENCE { hddEnclosure02Slots INTEGER,
hddEnclosure02Desc DisplayString,
hddEnclosure02Name DisplayString,
hddEnclosure02Serial DisplayString,
hddEnclosure02FirmVer DisplayString,
hddEnclosure02Capacity INTEGER,
hddEnclosure02Type INTEGER,
hddEnclosure02State DisplayString }
hddEnclosure02Slots OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"HDD slot#, 1..#of HDD."
::= { hddEnclosure02InfoEntry 1 }
hddEnclosure02Desc OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"HDD name."
::= { hddEnclosure02InfoEntry 2 }
hddEnclosure02Name OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"HDD name."
::= { hddEnclosure02InfoEntry 3 }
hddEnclosure02Serial OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"HDD serial number."
::= { hddEnclosure02InfoEntry 4 }
hddEnclosure02FirmVer OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"HDD firmware reversion."
::= { hddEnclosure02InfoEntry 5 }
hddEnclosure02Capacity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"HDD total capacity in mega byte."
::= { hddEnclosure02InfoEntry 6 }
hddEnclosure02Type OBJECT-TYPE
SYNTAX INTEGER {
SATA(1),
SAS(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"HDD Type."
::= { hddEnclosure02InfoEntry 7 }
hddEnclosure02State OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"HDD state."
::= { hddEnclosure02InfoEntry 8 }
-- Enclosure#03 hdd info
hddEnclosure03Installed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Enclosure Installed?"
::= { HddEnclosure3 1 }
hddEnclosure03Description OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Enclosure description."
::= { HddEnclosure3 2 }
hddEnclosure03NumberOfSlot OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"# of slot."
::= { HddEnclosure3 3 }
hddEnclosure03InfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF HddEnclosure03InfoEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table containing HDD information."
::= { HddEnclosure3 4 }
hddEnclosure03InfoEntry OBJECT-TYPE
SYNTAX HddEnclosure03InfoEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information about a particular current HDD state."
INDEX { hddEnclosure03Slots }
::= { hddEnclosure03InfoTable 1 }
HddEnclosure03InfoEntry ::= SEQUENCE { hddEnclosure03Slots INTEGER,
hddEnclosure03Desc DisplayString,
hddEnclosure03Name DisplayString,
hddEnclosure03Serial DisplayString,
hddEnclosure03FirmVer DisplayString,
hddEnclosure03Capacity INTEGER,
hddEnclosure03Type INTEGER,
hddEnclosure03State DisplayString }
hddEnclosure03Slots OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"HDD slot#, 1..#of HDD."
::= { hddEnclosure03InfoEntry 1 }
hddEnclosure03Desc OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"HDD name."
::= { hddEnclosure03InfoEntry 2 }
hddEnclosure03Name OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"HDD name."
::= { hddEnclosure03InfoEntry 3 }
hddEnclosure03Serial OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"HDD serial number."
::= { hddEnclosure03InfoEntry 4 }
hddEnclosure03FirmVer OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"HDD firmware reversion."
::= { hddEnclosure03InfoEntry 5 }
hddEnclosure03Capacity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"HDD total capacity in mega byte."
::= { hddEnclosure03InfoEntry 6 }
hddEnclosure03Type OBJECT-TYPE
SYNTAX INTEGER {
SATA(1),
SAS(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"HDD Type."
::= { hddEnclosure03InfoEntry 7 }
hddEnclosure03State OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"HDD state."
::= { hddEnclosure03InfoEntry 8 }
-- Enclosure#04 hdd info
hddEnclosure04Installed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Enclosure Installed?"
::= { HddEnclosure4 1 }
hddEnclosure04Description OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Enclosure description."
::= { HddEnclosure4 2 }
hddEnclosure04NumberOfSlot OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"# of slot."
::= { HddEnclosure4 3 }
hddEnclosure04InfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF HddEnclosure04InfoEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table containing HDD information."
::= { HddEnclosure4 4 }
hddEnclosure04InfoEntry OBJECT-TYPE
SYNTAX HddEnclosure04InfoEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information about a particular current HDD state."
INDEX { hddEnclosure04Slots }
::= { hddEnclosure04InfoTable 1 }
HddEnclosure04InfoEntry ::= SEQUENCE { hddEnclosure04Slots INTEGER,
hddEnclosure04Desc DisplayString,
hddEnclosure04Name DisplayString,
hddEnclosure04Serial DisplayString,
hddEnclosure04FirmVer DisplayString,
hddEnclosure04Capacity INTEGER,
hddEnclosure04Type INTEGER,
hddEnclosure04State DisplayString }
hddEnclosure04Slots OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"HDD slot#, 1..#of HDD."
::= { hddEnclosure04InfoEntry 1 }
hddEnclosure04Desc OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"HDD name."
::= { hddEnclosure04InfoEntry 2 }
hddEnclosure04Name OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"HDD name."
::= { hddEnclosure04InfoEntry 3 }
hddEnclosure04Serial OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"HDD serial number."
::= { hddEnclosure04InfoEntry 4 }
hddEnclosure04FirmVer OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"HDD firmware reversion."
::= { hddEnclosure04InfoEntry 5 }
hddEnclosure04Capacity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"HDD total capacity in mega byte."
::= { hddEnclosure04InfoEntry 6 }
hddEnclosure04Type OBJECT-TYPE
SYNTAX INTEGER {
SATA(1),
SAS(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"HDD Type."
::= { hddEnclosure04InfoEntry 7 }
hddEnclosure04State OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"HDD state."
::= { hddEnclosure04InfoEntry 8 }
-- Enclosure#05 hdd info
hddEnclosure05Installed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Enclosure Installed?"
::= { HddEnclosure5 1 }
hddEnclosure05Description OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Enclosure description."
::= { HddEnclosure5 2 }
hddEnclosure05NumberOfSlot OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"# of slot."
::= { HddEnclosure5 3 }
hddEnclosure05InfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF HddEnclosure05InfoEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table containing HDD information."
::= { HddEnclosure5 4 }
hddEnclosure05InfoEntry OBJECT-TYPE
SYNTAX HddEnclosure05InfoEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information about a particular current HDD state."
INDEX { hddEnclosure05Slots }
::= { hddEnclosure05InfoTable 1 }
HddEnclosure05InfoEntry ::= SEQUENCE { hddEnclosure05Slots INTEGER,
hddEnclosure05Desc DisplayString,
hddEnclosure05Name DisplayString,
hddEnclosure05Serial DisplayString,
hddEnclosure05FirmVer DisplayString,
hddEnclosure05Capacity INTEGER,
hddEnclosure05Type INTEGER,
hddEnclosure05State DisplayString }
hddEnclosure05Slots OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"HDD slot#, 1..#of HDD."
::= { hddEnclosure05InfoEntry 1 }
hddEnclosure05Desc OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"HDD name."
::= { hddEnclosure05InfoEntry 2 }
hddEnclosure05Name OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"HDD name."
::= { hddEnclosure05InfoEntry 3 }
hddEnclosure05Serial OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"HDD serial number."
::= { hddEnclosure05InfoEntry 4 }
hddEnclosure05FirmVer OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"HDD firmware reversion."
::= { hddEnclosure05InfoEntry 5 }
hddEnclosure05Capacity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"HDD total capacity in mega byte."
::= { hddEnclosure05InfoEntry 6 }
hddEnclosure05Type OBJECT-TYPE
SYNTAX INTEGER {
SATA(1),
SAS(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"HDD Type."
::= { hddEnclosure05InfoEntry 7 }
hddEnclosure05State OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"HDD state."
::= { hddEnclosure05InfoEntry 8 }
-- Enclosure#06 hdd info
hddEnclosure06Installed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Enclosure Installed?"
::= { HddEnclosure6 1 }
hddEnclosure06Description OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Enclosure description."
::= { HddEnclosure6 2 }
hddEnclosure06NumberOfSlot OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"# of power supply, e.g. 2."
::= { HddEnclosure6 3 }
hddEnclosure06InfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF HddEnclosure06InfoEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table containing HDD information."
::= { HddEnclosure6 4 }
hddEnclosure06InfoEntry OBJECT-TYPE
SYNTAX HddEnclosure06InfoEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information about a particular current HDD state."
INDEX { hddEnclosure06Slots }
::= { hddEnclosure06InfoTable 1 }
HddEnclosure06InfoEntry ::= SEQUENCE { hddEnclosure06Slots INTEGER,
hddEnclosure06Desc DisplayString,
hddEnclosure06Name DisplayString,
hddEnclosure06Serial DisplayString,
hddEnclosure06FirmVer DisplayString,
hddEnclosure06Capacity INTEGER,
hddEnclosure06Type INTEGER,
hddEnclosure06State DisplayString }
hddEnclosure06Slots OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"HDD slot#, 1..#of HDD."
::= { hddEnclosure06InfoEntry 1 }
hddEnclosure06Desc OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"HDD name."
::= { hddEnclosure06InfoEntry 2 }
hddEnclosure06Name OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"HDD name."
::= { hddEnclosure06InfoEntry 3 }
hddEnclosure06Serial OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"HDD serial number."
::= { hddEnclosure06InfoEntry 4 }
hddEnclosure06FirmVer OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"HDD firmware reversion."
::= { hddEnclosure06InfoEntry 5 }
hddEnclosure06Capacity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"HDD total capacity in mega byte."
::= { hddEnclosure06InfoEntry 6 }
hddEnclosure06Type OBJECT-TYPE
SYNTAX INTEGER {
SATA(1),
SAS(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"HDD Type."
::= { hddEnclosure06InfoEntry 7 }
hddEnclosure06State OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"HDD state."
::= { hddEnclosure06InfoEntry 8 }
-- Enclosure#07 hdd info
hddEnclosure07Installed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Enclosure Installed?"
::= { HddEnclosure7 1 }
hddEnclosure07Description OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Enclosure description."
::= { HddEnclosure7 2 }
hddEnclosure07NumberOfSlot OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"# of power supply, e.g. 2."
::= { HddEnclosure7 3 }
hddEnclosure07InfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF HddEnclosure07InfoEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table containing HDD information."
::= { HddEnclosure7 4 }
hddEnclosure07InfoEntry OBJECT-TYPE
SYNTAX HddEnclosure07InfoEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information about a particular current HDD state."
INDEX { hddEnclosure07Slots }
::= { hddEnclosure07InfoTable 1 }
HddEnclosure07InfoEntry ::= SEQUENCE { hddEnclosure07Slots INTEGER,
hddEnclosure07Desc DisplayString,
hddEnclosure07Name DisplayString,
hddEnclosure07Serial DisplayString,
hddEnclosure07FirmVer DisplayString,
hddEnclosure07Capacity INTEGER,
hddEnclosure07Type INTEGER,
hddEnclosure07State DisplayString }
hddEnclosure07Slots OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"HDD slot#, 1..#of HDD."
::= { hddEnclosure07InfoEntry 1 }
hddEnclosure07Desc OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"HDD name."
::= { hddEnclosure07InfoEntry 2 }
hddEnclosure07Name OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"HDD name."
::= { hddEnclosure07InfoEntry 3 }
hddEnclosure07Serial OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"HDD serial number."
::= { hddEnclosure07InfoEntry 4 }
hddEnclosure07FirmVer OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"HDD firmware reversion."
::= { hddEnclosure07InfoEntry 5 }
hddEnclosure07Capacity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"HDD total capacity in mega byte."
::= { hddEnclosure07InfoEntry 6 }
hddEnclosure07Type OBJECT-TYPE
SYNTAX INTEGER {
SATA(1),
SAS(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"HDD Type."
::= { hddEnclosure07InfoEntry 7 }
hddEnclosure07State OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"HDD state."
::= { hddEnclosure07InfoEntry 8 }
-- Enclosure#08 hdd info
hddEnclosure08Installed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Enclosure Installed?"
::= { HddEnclosure8 1 }
hddEnclosure08Description OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Enclosure description."
::= { HddEnclosure8 2 }
hddEnclosure08NumberOfSlot OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"# of power supply, e.g. 2."
::= { HddEnclosure8 3 }
hddEnclosure08InfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF HddEnclosure08InfoEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table containing HDD information."
::= { HddEnclosure8 4 }
hddEnclosure08InfoEntry OBJECT-TYPE
SYNTAX HddEnclosure08InfoEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information about a particular current HDD state."
INDEX { hddEnclosure08Slots }
::= { hddEnclosure08InfoTable 1 }
HddEnclosure08InfoEntry ::= SEQUENCE { hddEnclosure08Slots INTEGER,
hddEnclosure08Desc DisplayString,
hddEnclosure08Name DisplayString,
hddEnclosure08Serial DisplayString,
hddEnclosure08FirmVer DisplayString,
hddEnclosure08Capacity INTEGER,
hddEnclosure08Type INTEGER,
hddEnclosure08State DisplayString }
hddEnclosure08Slots OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"HDD slot#, 1..#of HDD."
::= { hddEnclosure08InfoEntry 1 }
hddEnclosure08Desc OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"HDD name."
::= { hddEnclosure08InfoEntry 2 }
hddEnclosure08Name OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"HDD name."
::= { hddEnclosure08InfoEntry 3 }
hddEnclosure08Serial OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"HDD serial number."
::= { hddEnclosure08InfoEntry 4 }
hddEnclosure08FirmVer OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"HDD firmware reversion."
::= { hddEnclosure08InfoEntry 5 }
hddEnclosure08Capacity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"HDD total capacity in mega byte."
::= { hddEnclosure08InfoEntry 6 }
hddEnclosure08Type OBJECT-TYPE
SYNTAX INTEGER {
SATA(1),
SAS(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"HDD Type."
::= { hddEnclosure08InfoEntry 7 }
hddEnclosure08State OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"HDD state."
::= { hddEnclosure08InfoEntry 8 }
-- definition of object types of RaidSet information
raidInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF RaidInfoEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table containing RaidSet information."
::= { RaidsetInformation 1 }
raidInfoEntry OBJECT-TYPE
SYNTAX RaidInfoEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information about a particular current RaidSet state."
INDEX { raidNumber }
::= { raidInfoTable 1 }
RaidInfoEntry ::= SEQUENCE { raidNumber INTEGER,
raidName DisplayString,
raidDisks INTEGER,
raidState DisplayString,
raidTotalCapacity INTEGER,
raidFreeCapacity INTEGER,
raidMemberDiskCapacity INTEGER,
raidMemberDiskChannels DisplayString }
raidNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"RiadSet#, 0..#raidset-1."
::= { raidInfoEntry 1 }
raidName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Raid set name."
::= { raidInfoEntry 2 }
raidDisks OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Member disks."
::= { raidInfoEntry 3 }
raidState OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Raid state."
::= { raidInfoEntry 4 }
raidTotalCapacity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"RaidSet total capacity in MB, totla capacity."
::= { raidInfoEntry 5 }
raidFreeCapacity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"RaidSet free capacity in MB, totla capacity."
::= { raidInfoEntry 6 }
raidMemberDiskCapacity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"RaidSet member disk capacity in MB, totla capacity."
::= { raidInfoEntry 7 }
raidMemberDiskChannels OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Member disk channels."
::= { raidInfoEntry 8 }
-- definition of object types of VolumeSet information
volInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF VolInfoEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table containing VolumeSet information."
::= { VolumesetInformation 1 }
volInfoEntry OBJECT-TYPE
SYNTAX VolInfoEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information about a particular current VolumeSet state."
INDEX { volNumber }
::= { volInfoTable 1 }
VolInfoEntry ::= SEQUENCE { volNumber INTEGER,
volName DisplayString,
volRaidName DisplayString,
volCapacity INTEGER,
volState DisplayString,
volProgress INTEGER,
volCluster INTEGER,
volChannel INTEGER,
volSCSIID INTEGER,
volSCSILUN INTEGER,
volRaidLevel DisplayString,
volStripes INTEGER,
volDisks INTEGER,
volCache INTEGER,
volTag INTEGER,
volMaxSpeed DisplayString,
volCurrentSpeed DisplayString }
volNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Volume number, 0..#of volume-1."
::= { volInfoEntry 1 }
volName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Volume name."
::= { volInfoEntry 2 }
volRaidName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Raid name."
::= { volInfoEntry 3 }
volCapacity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"In MB, Capacity."
::= { volInfoEntry 4 }
volState OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"VolumeSet state."
::= { volInfoEntry 5 }
volProgress OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"percentage."
::= { volInfoEntry 6 }
volCluster OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Clustering, 0:no, 1:yes."
::= { volInfoEntry 7 }
volChannel OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI Channel,0,1."
::= { volInfoEntry 8 }
volSCSIID OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI ID, 0..15."
::= { volInfoEntry 9 }
volSCSILUN OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI LUN, 0..7."
::= { volInfoEntry 10 }
volRaidLevel OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Raid Level, 0,1,3,5,6,30,50,60."
::= { volInfoEntry 11 }
volStripes OBJECT-TYPE
SYNTAX INTEGER {
4K(4096),
8K(8192),
16K(16384),
32K(32768),
64K(65536),
128K(131072)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Stripe size, in bytes."
::= { volInfoEntry 12 }
volDisks OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Disks."
::= { volInfoEntry 13 }
volCache OBJECT-TYPE
SYNTAX INTEGER {
Write-through(0),
Write-back(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cache enabled, 0:no, 1:yes."
::= { volInfoEntry 14 }
volTag OBJECT-TYPE
SYNTAX INTEGER {
Disabled(0),
Enabled(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Tag enabled, 0:no, 1:yes."
::= { volInfoEntry 15 }
volMaxSpeed OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Max speed."
::= { volInfoEntry 16 }
volCurrentSpeed OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Current speed."
::= { volInfoEntry 17 }
-- definition of object types of Event information
eventInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF EventInfoEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table containing Event information."
::= { EventInformation 1 }
eventInfoEntry OBJECT-TYPE
SYNTAX EventInfoEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information about a particular current event."
INDEX { eventNumber }
::= { eventInfoTable 1 }
EventInfoEntry ::= SEQUENCE { eventNumber INTEGER,
eventString DisplayString }
eventNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Event number, 0..#events-1."
::= { eventInfoEntry 1 }
eventString OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Event string."
::= { eventInfoEntry 2 }
-- Areca Raid Subsystem Trap Group
raidSubSysTraps OBJECT IDENTIFIER ::= { SASRaidSubsystem }
-- Traps definitions
-- RaidSet Traps
rsCreate TRAP-TYPE
ENTERPRISE raidSubSysTraps
VARIABLES { eventString }
DESCRIPTION
"%s."
::= 128
rsDelete TRAP-TYPE
ENTERPRISE raidSubSysTraps
VARIABLES { eventString }
DESCRIPTION
"%s."
::= 129
rsExpand TRAP-TYPE
ENTERPRISE raidSubSysTraps
VARIABLES { eventString }
DESCRIPTION
"%s."
::= 130
rsRebuild TRAP-TYPE
ENTERPRISE raidSubSysTraps
VARIABLES { eventString }
DESCRIPTION
"%s."
::= 131
rsDegraded TRAP-TYPE
ENTERPRISE raidSubSysTraps
VARIABLES { eventString }
DESCRIPTION
"%s."
::= 132
rsNoEvent TRAP-TYPE
ENTERPRISE raidSubSysTraps
VARIABLES { eventString }
DESCRIPTION
"%s."
::= 133
-- VolumeSet Traps
vsInitializing TRAP-TYPE
ENTERPRISE raidSubSysTraps
VARIABLES { eventString }
DESCRIPTION
"%s."
::= 256
vsRebuilding TRAP-TYPE
ENTERPRISE raidSubSysTraps
VARIABLES { eventString }
DESCRIPTION
"%s."
::= 257
vsMigrating TRAP-TYPE
ENTERPRISE raidSubSysTraps
VARIABLES { eventString }
DESCRIPTION
"%s."
::= 258
vsChecking TRAP-TYPE
ENTERPRISE raidSubSysTraps
VARIABLES { eventString }
DESCRIPTION
"%s."
::= 259
vsCompleteInit TRAP-TYPE
ENTERPRISE raidSubSysTraps
VARIABLES { eventString }
DESCRIPTION
"%s."
::= 260
vsCompleteRebuild TRAP-TYPE
ENTERPRISE raidSubSysTraps
VARIABLES { eventString }
DESCRIPTION
"%s."
::= 261
vsCompleteMigrating TRAP-TYPE
ENTERPRISE raidSubSysTraps
VARIABLES { eventString }
DESCRIPTION
"%s."
::= 262
vsCompleteChecking TRAP-TYPE
ENTERPRISE raidSubSysTraps
VARIABLES { eventString }
DESCRIPTION
"%s."
::= 263
vsCreate TRAP-TYPE
ENTERPRISE raidSubSysTraps
VARIABLES { eventString }
DESCRIPTION
"%s."
::= 264
vsDelete TRAP-TYPE
ENTERPRISE raidSubSysTraps
VARIABLES { eventString }
DESCRIPTION
"%s."
::= 265
vsModify TRAP-TYPE
ENTERPRISE raidSubSysTraps
VARIABLES { eventString }
DESCRIPTION
"%s."
::= 266
vsDegraded TRAP-TYPE
ENTERPRISE raidSubSysTraps
VARIABLES { eventString }
DESCRIPTION
"%s."
::= 267
vsFailed TRAP-TYPE
ENTERPRISE raidSubSysTraps
VARIABLES { eventString }
DESCRIPTION
"%s."
::= 268
vsRevived TRAP-TYPE
ENTERPRISE raidSubSysTraps
VARIABLES { eventString }
DESCRIPTION
"%s."
::= 269
vsTotals TRAP-TYPE
ENTERPRISE raidSubSysTraps
VARIABLES { eventString }
DESCRIPTION
"%s."
::= 270
-- IDE Device Traps
pdAdded TRAP-TYPE
ENTERPRISE raidSubSysTraps
VARIABLES { eventString }
DESCRIPTION
"%s."
::= 384
pdRemoved TRAP-TYPE
ENTERPRISE raidSubSysTraps
VARIABLES { eventString }
DESCRIPTION
"%s."
::= 385
pdReadError TRAP-TYPE
ENTERPRISE raidSubSysTraps
VARIABLES { eventString }
DESCRIPTION
"%s."
::= 386
pdWriteError TRAP-TYPE
ENTERPRISE raidSubSysTraps
VARIABLES { eventString }
DESCRIPTION
"%s."
::= 387
pdAtaEccError TRAP-TYPE
ENTERPRISE raidSubSysTraps
VARIABLES { eventString }
DESCRIPTION
"%s."
::= 388
pdAtaChangeMode TRAP-TYPE
ENTERPRISE raidSubSysTraps
VARIABLES { eventString }
DESCRIPTION
"%s."
::= 389
pdTimeOut TRAP-TYPE
ENTERPRISE raidSubSysTraps
VARIABLES { eventString }
DESCRIPTION
"%s."
::= 390
pdMarkFailed TRAP-TYPE
ENTERPRISE raidSubSysTraps
VARIABLES { eventString }
DESCRIPTION
"%s."
::= 391
pdPciError TRAP-TYPE
ENTERPRISE raidSubSysTraps
VARIABLES { eventString }
DESCRIPTION
"%s."
::= 392
pdSmartFailed TRAP-TYPE
ENTERPRISE raidSubSysTraps
VARIABLES { eventString }
DESCRIPTION
"%s."
::= 393
pdCreatePass TRAP-TYPE
ENTERPRISE raidSubSysTraps
VARIABLES { eventString }
DESCRIPTION
"%s."
::= 394
pdModifyPass TRAP-TYPE
ENTERPRISE raidSubSysTraps
VARIABLES { eventString }
DESCRIPTION
"%s."
::= 395
pdDeletePass TRAP-TYPE
ENTERPRISE raidSubSysTraps
VARIABLES { eventString }
DESCRIPTION
"%s."
::= 396
pdTotals TRAP-TYPE
ENTERPRISE raidSubSysTraps
VARIABLES { eventString }
DESCRIPTION
"%s."
::= 397
-- SCSI Bus Traps
scsiReset TRAP-TYPE
ENTERPRISE raidSubSysTraps
VARIABLES { eventString }
DESCRIPTION
"%s."
::= 512
scsiParity TRAP-TYPE
ENTERPRISE raidSubSysTraps
VARIABLES { eventString }
DESCRIPTION
"%s."
::= 513
scsiModeChange TRAP-TYPE
ENTERPRISE raidSubSysTraps
VARIABLES { eventString }
DESCRIPTION
"%s."
::= 514
scsiTotals TRAP-TYPE
ENTERPRISE raidSubSysTraps
VARIABLES { eventString }
DESCRIPTION
"%s."
::= 515
-- Hardware Monitor Traps
hwSdram1BitEcc TRAP-TYPE
ENTERPRISE raidSubSysTraps
VARIABLES { eventString }
DESCRIPTION
"%s."
::= 640
hwSdramMultiBitEcc TRAP-TYPE
ENTERPRISE raidSubSysTraps
VARIABLES { eventString }
DESCRIPTION
"%s."
::= 641
hwTempController TRAP-TYPE
ENTERPRISE raidSubSysTraps
VARIABLES { eventString }
DESCRIPTION
"%s."
::= 642
hwTempBackplane TRAP-TYPE
ENTERPRISE raidSubSysTraps
VARIABLES { eventString }
DESCRIPTION
"%s."
::= 643
hwVoltage15 TRAP-TYPE
ENTERPRISE raidSubSysTraps
VARIABLES { eventString }
DESCRIPTION
"%s."
::= 644
hwVoltage3 TRAP-TYPE
ENTERPRISE raidSubSysTraps
VARIABLES { eventString }
DESCRIPTION
"%s."
::= 645
hwVoltage5 TRAP-TYPE
ENTERPRISE raidSubSysTraps
VARIABLES { eventString }
DESCRIPTION
"%s."
::= 646
hwVoltage12 TRAP-TYPE
ENTERPRISE raidSubSysTraps
VARIABLES { eventString }
DESCRIPTION
"%s."
::= 647
hwVoltage1_3 TRAP-TYPE
ENTERPRISE raidSubSysTraps
VARIABLES { eventString }
DESCRIPTION
"%s."
::= 648
hwVoltage2_5 TRAP-TYPE
ENTERPRISE raidSubSysTraps
VARIABLES { eventString }
DESCRIPTION
"%s."
::= 649
hwVoltage1_25 TRAP-TYPE
ENTERPRISE raidSubSysTraps
VARIABLES { eventString }
DESCRIPTION
"%s."
::= 650
hwPower1Failed TRAP-TYPE
ENTERPRISE raidSubSysTraps
VARIABLES { eventString }
DESCRIPTION
"%s."
::= 651
hwFan1Failed TRAP-TYPE
ENTERPRISE raidSubSysTraps
VARIABLES { eventString }
DESCRIPTION
"%s."
::= 652
hwPower2Failed TRAP-TYPE
ENTERPRISE raidSubSysTraps
VARIABLES { eventString }
DESCRIPTION
"%s."
::= 653
hwFan2Failed TRAP-TYPE
ENTERPRISE raidSubSysTraps
VARIABLES { eventString }
DESCRIPTION
"%s."
::= 654
hwPower3Failed TRAP-TYPE
ENTERPRISE raidSubSysTraps
VARIABLES { eventString }
DESCRIPTION
"%s."
::= 655
hwFan3Failed TRAP-TYPE
ENTERPRISE raidSubSysTraps
VARIABLES { eventString }
DESCRIPTION
"%s."
::= 656
hwPower4Failed TRAP-TYPE
ENTERPRISE raidSubSysTraps
VARIABLES { eventString }
DESCRIPTION
"%s."
::= 657
hwFan4Failed TRAP-TYPE
ENTERPRISE raidSubSysTraps
VARIABLES { eventString }
DESCRIPTION
"%s."
::= 658
hwUpsPowerLoss TRAP-TYPE
ENTERPRISE raidSubSysTraps
VARIABLES { eventString }
DESCRIPTION
"%s."
::= 659
hwTempController_R TRAP-TYPE
ENTERPRISE raidSubSysTraps
VARIABLES { eventString }
DESCRIPTION
"%s."
::= 660
hwTempBackplane_R TRAP-TYPE
ENTERPRISE raidSubSysTraps
VARIABLES { eventString }
DESCRIPTION
"%s."
::= 661
hwVoltage15_R TRAP-TYPE
ENTERPRISE raidSubSysTraps
VARIABLES { eventString }
DESCRIPTION
"%s."
::= 662
hwVoltage3_R TRAP-TYPE
ENTERPRISE raidSubSysTraps
VARIABLES { eventString }
DESCRIPTION
"%s."
::= 663
hwVoltage5_R TRAP-TYPE
ENTERPRISE raidSubSysTraps
VARIABLES { eventString }
DESCRIPTION
"%s."
::= 664
hwVoltage12_R TRAP-TYPE
ENTERPRISE raidSubSysTraps
VARIABLES { eventString }
DESCRIPTION
"%s."
::= 665
hwVoltage1_3_R TRAP-TYPE
ENTERPRISE raidSubSysTraps
VARIABLES { eventString }
DESCRIPTION
"%s."
::= 666
hwVoltage2_5_R TRAP-TYPE
ENTERPRISE raidSubSysTraps
VARIABLES { eventString }
DESCRIPTION
"%s."
::= 667
hwVoltage1_25_R TRAP-TYPE
ENTERPRISE raidSubSysTraps
VARIABLES { eventString }
DESCRIPTION
"%s."
::= 668
hwPower1Failed_R TRAP-TYPE
ENTERPRISE raidSubSysTraps
VARIABLES { eventString }
DESCRIPTION
"%s."
::= 669
hwFan1Failed_R TRAP-TYPE
ENTERPRISE raidSubSysTraps
VARIABLES { eventString }
DESCRIPTION
"%s."
::= 670
hwPower2Failed_R TRAP-TYPE
ENTERPRISE raidSubSysTraps
VARIABLES { eventString }
DESCRIPTION
"%s."
::= 671
hwFan2Failed_R TRAP-TYPE
ENTERPRISE raidSubSysTraps
VARIABLES { eventString }
DESCRIPTION
"%s."
::= 672
hwPower3Failed_R TRAP-TYPE
ENTERPRISE raidSubSysTraps
VARIABLES { eventString }
DESCRIPTION
"%s."
::= 673
hwFan3Failed_R TRAP-TYPE
ENTERPRISE raidSubSysTraps
VARIABLES { eventString }
DESCRIPTION
"%s."
::= 674
hwPower4Failed_R TRAP-TYPE
ENTERPRISE raidSubSysTraps
VARIABLES { eventString }
DESCRIPTION
"%s."
::= 675
hwFan4Failed_R TRAP-TYPE
ENTERPRISE raidSubSysTraps
VARIABLES { eventString }
DESCRIPTION
"%s."
::= 676
END
Reference in New Issue Copy Permalink