librenms-librenms/mibs/avtech/TEMPAGER3E-MIB

--
--defines TEMPAGER3E-MIB for SNMP agent extension of TemPageR 3E
--Contents:	Global Registration Module
--		TemPageR OIDs - Enterprise 20916
--Version:	1.0.0 
--Date:		30 July 2008
--Developed By: AVTECH Software, Inc.

--
--Copyright (c) 2008 AVTECH Software, Inc.
--

TEMPAGER3E-MIB DEFINITIONS ::= BEGIN


IMPORTS
	enterprises, IpAddress, Counter, TimeTicks
		FROM RFC1155-SMI
	OBJECT-TYPE
		FROM RFC-1212
	TRAP-TYPE 
		FROM RFC-1215;


avtech      OBJECT IDENTIFIER ::= { enterprises 20916 }
products      OBJECT IDENTIFIER ::= { avtech 1 }
TEMPAGER3E      OBJECT IDENTIFIER ::= { products 7 }
sensors       OBJECT IDENTIFIER ::= { TEMPAGER3E 1 }
traps	      OBJECT IDENTIFIER ::= { TEMPAGER3E 2 }
internal   OBJECT IDENTIFIER ::= { sensors 1 }
temperature   OBJECT IDENTIFIER ::= { internal 1 }
digital   OBJECT IDENTIFIER ::= { sensors 2 }
digital-sen1   OBJECT IDENTIFIER ::= { digital 1 }
digital-sen2   OBJECT IDENTIFIER ::= { digital 2 }

 
-- TemPageR 3E MIB
-- Parameters 

internal-tempc OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The internal temperature reading in Celsius. Because the SNMP Protocol does not support floating point numbers, values are scaled by 100 and should be divided by 100 to get the actual value."
::= { temperature 1 }

internal-tempf OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The internal temperature reading in Fahrenheit. Because the SNMP Protocol does not support floating point numbers, values are scaled by 100 and should be divided by 100 to get the actual value."
::= { temperature 2 }

digital-sen1-1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor, this value represents the Current reading in Amperage."
::= { digital-sen1 1 }

digital-sen1-2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Power reading in Watts."
::= { digital-sen1 2 }

digital-sen1-3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor, this value represents the Voltage reading in Volts."
::= { digital-sen1 3 }

digital-sen1-4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Reference reading in Volts."
::= { digital-sen1 4 }

digital-sen2-1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor, this value represents the Current reading in Amperage."
::= { digital-sen2 1 }

digital-sen2-2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Power reading in Watts."
::= { digital-sen2 2 }

digital-sen2-3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor, this value represents the Voltage reading in Volts."
::= { digital-sen2 3 }

digital-sen2-4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Reference reading in Volts."
::= { digital-sen2 4 }

alarmmessage OBJECT-TYPE
	SYNTAX  	OCTET STRING
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Last Alarm Message"
::= { traps 1 }	
	
	
-- TEMPAGER3E TRAPS
	
tempager3e-snmp-trap TRAP-TYPE
	ENTERPRISE	TEMPAGER3E
	VARIABLES	{ alarmmessage }
	DESCRIPTION	"A tempager3e-snmp-trap indicates that an alarm
			condition has occurred on the sensor indicated
			by the alarmmessage variable."
::= 2
END