librenms-librenms/mibs/ENTERASYS-SNMP-PERSISTENCE-MIB

ENTERASYS-SNMP-PERSISTENCE-MIB DEFINITIONS ::= BEGIN

--  enterasys-snmp-persistence-mib.txt
--
--  Part Number: <TBD>
--
--

--  This module provides authoritative definitions for Enterasys
--  Networks' SNMP persistence MIB.

--
--  This module will be extended, as needed.

--  Enterasys Networks reserves the right to make changes in this
--  specification and other information contained in this document
--  without prior notice.  The reader should consult Enterasys Networks
--  to determine whether any such changes have been made.
--
--  In no event shall Enterasys Networks be liable for any incidental,
--  indirect, special, or consequential damages whatsoever (including
--  but not limited to lost profits) arising out of or related to this
--  document or the information contained in it, even if Enterasys
--  Networks has been advised of, known, or should have known, the
--  possibility of such damages.
--
--  This MIB is based upon the Storage Type MIB, an IETF Internet
--  Draft, dated June 21, 2001 with Juergen Schoenwaelder listed as
--  the author.

--  Copyright (C) The Internet Society (2001).  All Rights Reserved.


IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE
        FROM SNMPv2-SMI
    DateAndTime
        FROM SNMPv2-TC
    MODULE-COMPLIANCE, OBJECT-GROUP
        FROM SNMPv2-CONF
    SnmpAdminString
        FROM SNMP-FRAMEWORK-MIB
    etsysModules
        FROM ENTERASYS-MIB-NAMES;

etsysSnmpPersistenceMIB MODULE-IDENTITY
    LAST-UPDATED "200209092022Z"  -- Mon Sep  9 20:22 GMT 2002
    ORGANIZATION "Enterasys Networks Inc"
    CONTACT-INFO
    "Postal: Enterasys Networks
             35 Industrial Way, P.O. Box 5005
             Rochester, NH 03867-0505

     Phone:  +1 603 332 9400
     E-mail: support@enterasys.com
     WWW:    http://www.enterasys.com"

    DESCRIPTION
        "This MIB modules provides objects that allow management
         applications to commit persistent SNMP configuration
         information to persistent storage."

    REVISION  "200209092022Z"  -- Mon Sep  9 20:22 GMT 2002
    DESCRIPTION
        "The initial version of this MIB module."
    ::= { etsysModules 24 }


etsysSnmpPersistenceObjects
        OBJECT IDENTIFIER ::= { etsysSnmpPersistenceMIB 1 }


etsysSnmpPersistenceMode OBJECT-TYPE
    SYNTAX        INTEGER { snmpNormalSave(1),
                            pushButtonSave(2),
                            timeDelayedSave(3)
                  }
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "Setting this object to snmpNormalSave(1) will cause this
         device to exhibit what could be considered normal SNMP
         behavior, that is each SNMP set of a persistent object
         will be saved to persistent storage as part of the set
         operation.

         Setting this object to pushButtonSave(2) will cause SNMP
         sets of persistent objects to be buffered in volatile memory
         until the configuration is explicitly saved to persistent
         memory, either through the CLI or by setting the
         etsysSnmpPersistenceWrite object to save(2).

         Setting this object to timeDelayedSave(3) will cause SNMP
         sets of persistent objects to be buffered in volatile memory
         until certain implementation dependent time conditions are
         met.  Once these conditions are met the configuration is
         saved to persistent memory.

         Setting this object to a mode that is not supported on that
         particular implementation leads to an inconsistent value error.

         On an SNMP get operation this object will return the current
         persistent storage mode of operation."
    ::= { etsysSnmpPersistenceObjects 1 }

etsysSnmpPersistenceSave OBJECT-TYPE
    SYNTAX        INTEGER { nop(1), save(2) }
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "Setting this object to save(2) will cause the current
         configuration that is stored in volatile memory to be
         written to persistent memory and become the start-up
         configuration.

         This will also cause any configuration information
         that is part of another management interface's active
         configuration to become part of the start-up
         configuration.

         Any configuration changes made through SNMP will become
         part of the start-up configuration if and when another
         management interface saves the current configuration to
         persistent storage.

         Setting this object to save(2) while the value of the
         etsysSnmpPersistenceMode object is NOT pushButtonSave(2)
         MAY lead to an inconsistent value error.

         Setting this object to save(2) while the value of the
         etsysSnmpPersistenceStatus object is savingChanges(3)
         leads to an inconsistent value error.

         Setting this object to nop(1) always succeeds and has no
         effect.

         On an SNMP get operation this object will return nop(1).

         Management applications are advised to make use of the
         snmpSetSerialNo object defined in the SNMPv2-MIB to
         coordinate their use of this object."
    ::= { etsysSnmpPersistenceObjects 2 }

etsysSnmpPersistenceStatus OBJECT-TYPE
    SYNTAX        INTEGER {
                      other(1),
                      unsavedChanges(2),
                      savingChanges(3),
                      saveSucceeded(4),
                      saveFailed(5)
                  }
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "This object reports the current status of the persistent
         storage system when the etsysSnmpPersistenceMode object is
         NOT set to snmpNormalSave(1).

         other          - The value returned after initialization and
                          before any configuration changes are made
                          when the etsysSnmpPersistenceMode object is
                          NOT set to snmpNormalSave(1).
                          The value returned in all cases when the
                          etsysSnmpPersistenceMode object is set to
                          snmpNormalSave(1).

         unsavedChanges - The value returned when there are existing
                          configuration changes that have not been
                          saved to persistent storage.

         savingChanges  - The value returned during the process of
                          writing the current configuration to 
                          persistent storage.
               
         saveSucceeded  - The value returned after the process of
                          writing the current configuration to
                          persistent storage has succeeded.

         saveFailed     - The value returned after the process of
                          writing the current configuration to
                          persistent storage has failed.

         This status will reflect operations initiated through SNMP as
         well as all other supported management interfaces."
    ::= { etsysSnmpPersistenceObjects 3 }

etsysSnmpPersistenceStatusTime OBJECT-TYPE
    SYNTAX        TimeTicks
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The value of sysUpTime when etsysSnmpPersistenceStatus was
         last updated. If etsysSnmpPersistenceStatus has not been
         updated since initialization the value zero is returned."
    ::= { etsysSnmpPersistenceObjects 4 }

etsysSnmpPersistenceError OBJECT-TYPE
    SYNTAX        SnmpAdminString
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
       "This object contains a descriptive error message if the
        last attempt to write to persistent storage has failed."
    ::= { etsysSnmpPersistenceObjects 5 }

etsysSnmpPersistenceErrorTime OBJECT-TYPE
    SYNTAX        DateAndTime
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
       "The data and time when the etsysSnmpPersistenceError was
        last updated.  If etsysSnmpPersistenceError has not been
        updated since initialization the value '0000000000000000'H
        is returned."
    ::= { etsysSnmpPersistenceObjects 6 }


-- -------------------------------------------------------------
-- Conformance Information
-- -------------------------------------------------------------

etsysSnmpPersistenceConformance
    OBJECT IDENTIFIER ::= { etsysSnmpPersistenceMIB 2 }

etsysSnmpPersistenceGroups
    OBJECT IDENTIFIER ::= { etsysSnmpPersistenceConformance 1 }

etsysSnmpPersistenceCompliances
    OBJECT IDENTIFIER ::= { etsysSnmpPersistenceConformance 2 }


-- -------------------------------------------------------------
-- units of conformance
-- -------------------------------------------------------------

etsysSnmpPersistenceGroup OBJECT-GROUP
    OBJECTS { etsysSnmpPersistenceMode,
              etsysSnmpPersistenceSave,
              etsysSnmpPersistenceStatus,
              etsysSnmpPersistenceStatusTime,
              etsysSnmpPersistenceError,
              etsysSnmpPersistenceErrorTime }
    STATUS      current
    DESCRIPTION
        "A collection of objects providing support for
         delayed persistence of otherwise persistent SNMP
         objects."
    ::= { etsysSnmpPersistenceGroups 1 }


-- -------------------------------------------------------------
-- compliance statements
-- -------------------------------------------------------------

etsysSnmpPersistenceCompliance MODULE-COMPLIANCE
    STATUS      current
    DESCRIPTION
        "The compliance statement for devices that support
         delayed persistence of otherwise persistent SNMP
         objects."
    MODULE
    MANDATORY-GROUPS { etsysSnmpPersistenceGroup }
    ::= { etsysSnmpPersistenceCompliances 1 }

END