librenms-librenms/mibs/HP-ICF-PIM

HP-ICF-PIM DEFINITIONS ::= BEGIN

    IMPORTS
        OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE, IpAddress, 
        Integer32, Unsigned32, TimeTicks
            FROM SNMPv2-SMI
        MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
            FROM SNMPv2-CONF
        TruthValue, RowStatus
            FROM SNMPv2-TC
        pimCandidateRPEntry, pimInterfaceEntry, pimComponentEntry, 
        pimRPSetComponent
            FROM PIM-MIB
        hpSwitch
            FROM HP-ICF-OID;

    hpicfPimMIB MODULE-IDENTITY
        LAST-UPDATED "200508041619Z"  -- August 4, 2005
        ORGANIZATION "Hewlett-Packard Company
                      ProCurve Networking Business"
        CONTACT-INFO "Hewlett-Packard Company
                      8000 Foothills Blvd.
                      Roseville, CA 95747"
        DESCRIPTION  "This MIB module contains HP proprietary
                     extensions to the standard PIM MIB (RFC 2934)."

        REVISION     "200508041619Z"  -- August 4, 2005
        DESCRIPTION  "Added PIM-SM objects."

        REVISION     "200406300000Z"  -- June 30, 2004
        DESCRIPTION  "Initial revision."
        ::= { hpSwitch 20 }

-- **********************************************************************
-- The PIM MIB Groups
-- **********************************************************************

    hpicfPimObjects     OBJECT IDENTIFIER ::= { hpicfPimMIB 1 }
    hpicfPimTraps       OBJECT IDENTIFIER ::= { hpicfPimObjects 0 }
    hpicfPim            OBJECT IDENTIFIER ::= { hpicfPimObjects 1 }

    hpicfPimConformance OBJECT IDENTIFIER ::= { hpicfPimMIB 2 }
    hpicfPimGroups      OBJECT IDENTIFIER ::= { hpicfPimConformance 1 }
    hpicfPimCompliances OBJECT IDENTIFIER ::= { hpicfPimConformance 2 }

-- **********************************************************************
-- Start of MIB objects
-- **********************************************************************

    hpicfPimAdminStatus OBJECT-TYPE
        SYNTAX      INTEGER{
                        enable(1),
                        disable(2)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "The operational status of the PIM routing protocol
                    on this router. Default is disabled."
        DEFVAL      { disable }
        ::= { hpicfPim 1 }

    hpicfPimStateRefreshInterval OBJECT-TYPE
        SYNTAX      Integer32 (10..300)
        UNITS       "seconds"
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "The interval between successive State Refresh
                    messages originated by this router. 
                    Default is 60 seconds."
        DEFVAL { 60 } 
        ::= { hpicfPim 2 } 

    hpicfPimSPTThreshold OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Specifies a threshold for switching to the Shortest 
                    Path Tree (SPT) on this router. If the object has 
                    the special value of -1, the Shared Tree rooted to the
                    Rendezvous Point (RP) will be used indefinitely on the 
                    router. Default is -1."
        DEFVAL { -1 }
        ::= { hpicfPim 3 }

    hpicfPimTrapControl OBJECT-TYPE
        SYNTAX       BITS {
                         neighborLoss(0),
                         hardMrtFull(1),
                         softMrtFull(2)
                     }
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION  "Indicates whether the PIM-enabled router will generate
                     SNMP traps for PIM events. The set bit means 'enabled'.

                     - neighborLoss(0)
                       This bit controls whether the notification trap is
                       allowed to be send when the neighbour timer expires
                       and the router has no other neighbours on the same
                       interface with a lower IP address than itself.

                     - hardMrtFull(1)
                       This bit controls whether the notification trap is
                       allowed to be send when the MRT table is full and
                       the error has been originated by hardware.

                     - softMrtFull(2)
                       This bit controls whether the notification trap is
                       allowed to be send when the MRT table is full and
                       the error has been originated by software."
        ::= { hpicfPim 4 }

-- **********************************************************************
-- The PIM Static RP-Set Table
-- **********************************************************************

    hpicfPimStaticRPSetTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF HpicfPimStaticRPSetEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "The (conceptual) table containing statically 
                    configured Rendezvous Points (RPs) for IP multicast 
                    group mappings. This information is being used 
                    in the PIM Sparse mode only."
        ::= { hpicfPim 5 }

    hpicfPimStaticRPSetEntry OBJECT-TYPE
        SYNTAX      HpicfPimStaticRPSetEntry 
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "An entry (row) in the hpicfPimStaticRPSetTable. 
                    NOTE: the pimRPSetComponent is an index that uniquely 
                    identifies the component. Each protocol instance 
                    connected to a separate domain should have a different 
                    index value."
        INDEX      { pimRPSetComponent,
                     hpicfPimStaticRPSetGroupAddress, 
                     hpicfPimStaticRPSetGroupMask,
                     hpicfPimStaticRPSetAddress }
        ::= { hpicfPimStaticRPSetTable 1 }

    HpicfPimStaticRPSetEntry ::= 
        SEQUENCE {
            hpicfPimStaticRPSetGroupAddress      IpAddress,
            hpicfPimStaticRPSetGroupMask         IpAddress,
            hpicfPimStaticRPSetAddress           IpAddress,
            hpicfPimStaticRPSetOverride          TruthValue,
            hpicfPimStaticRPSetRowStatus         RowStatus
    }

    hpicfPimStaticRPSetGroupAddress OBJECT-TYPE
        SYNTAX      IpAddress
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "The IP multicast group address which, when combined
                    with hpicfPimStaticRPSetGroupMask, gives the group 
                    prefix for which this entry contains information 
                    about the statically configured RP."
        ::= { hpicfPimStaticRPSetEntry 1 }

    hpicfPimStaticRPSetGroupMask OBJECT-TYPE
        SYNTAX      IpAddress
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "The multicast group address mask which, when combined 
                    with hpicfPimStaticRPSetGroupAddress, gives the group 
                    prefix for which this entry contains information about 
                    the statically configured RP."
        ::= { hpicfPimStaticRPSetEntry 2 }

    hpicfPimStaticRPSetAddress OBJECT-TYPE
        SYNTAX      IpAddress
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "The IP address of statically configured RP for the 
                    given IP multicast group(s)."
        ::= { hpicfPimStaticRPSetEntry 3 }

    hpicfPimStaticRPSetOverride OBJECT-TYPE 
        SYNTAX      TruthValue
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "If true, indicates that the router should ignore the 
                    information learned by a BSR if there is a conflict 
                    between the information this static entry contains and 
                    the information that is learned by the BSR. 
                    Default is false."
        DEFVAL { false }
        ::= { hpicfPimStaticRPSetEntry 4 }

    hpicfPimStaticRPSetRowStatus OBJECT-TYPE
        SYNTAX     RowStatus
        MAX-ACCESS read-create
        STATUS     current
        DESCRIPTION "The status of this row, by which new entries may be 
                    created, or old entries deleted from this table."
        ::= { hpicfPimStaticRPSetEntry 5 }

-- **********************************************************************
-- The Extensions to the PIM Interface Table (RFC 2934)
-- **********************************************************************

    hpicfPimIfTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF HpicfPimIfEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "HP extensions to the pimInterfaceTable."
        ::= { hpicfPim 6 }

    hpicfPimIfEntry OBJECT-TYPE
        SYNTAX      HpicfPimIfEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "HP extensions for an entry in the pimInterfaceTable."
        AUGMENTS    { pimInterfaceEntry }
        ::= { hpicfPimIfTable 1 }

    HpicfPimIfEntry ::=
        SEQUENCE {
            hpicfPimIfAddress            IpAddress,
            hpicfPimIfTrigHelloInterval  Integer32,
            hpicfPimIfHelloHoldtime      Integer32,
            hpicfPimIfLanPruneDelay      TruthValue,
            hpicfPimIfPropagationDelay   Integer32,
            hpicfPimIfOverrideInterval   Integer32,
            hpicfPimIfGenerationID       TruthValue,
            hpicfPimIfJoinPruneHoldtime  Unsigned32,
            hpicfPimIfGraftRetryInterval Integer32,
            hpicfPimIfMaxGraftRetries    Integer32,
            hpicfPimIfSRTTLThreshold     Unsigned32,
            hpicfPimIfLanDelayEnabled    TruthValue,
            hpicfPimIfSRCapable          TruthValue,
            hpicfPimIfDRPriority         Unsigned32,
            hpicfPimIfNBRTimeout         Integer32
        }

    hpicfPimIfAddress OBJECT-TYPE
        SYNTAX      IpAddress
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "This is copy of pimInterfaceAddress with read-create 
                    access. PIM uses this source address to send its 
                    protocol packets out on this interface. This address can 
                    be set to one of IP addresses of the interface or 
                    255.255.255.255 if the address is determined dynamically 
                    based on the current IP configuration.
                    The currently used source address is value of
                    pimInterfaceAddress in the latter case."
        ::= { hpicfPimIfEntry 1 }

    hpicfPimIfTrigHelloInterval OBJECT-TYPE 
        SYNTAX      Integer32 (0..5)
        UNITS       "seconds"
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "The maximum time before a triggered PIM Hello message 
                    is transmitted on this interface. Default is 5 seconds."
        DEFVAL { 5 } 
        ::= { hpicfPimIfEntry 2 } 

    hpicfPimIfHelloHoldtime OBJECT-TYPE 
        SYNTAX      Integer32 (17..1050) 
        UNITS       "seconds"
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "The value set in the Holdtime field of Hello messages 
                    transmitted on this interface.  This should be 3.5 
                    times the value of pimInterfaceHelloInterval. 
                    Default is 105 seconds."
        DEFVAL { 105 } 
        ::= { hpicfPimIfEntry 3 } 

    hpicfPimIfLanPruneDelay OBJECT-TYPE 
        SYNTAX      TruthValue
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "Turns the LAN Prune Delay Option off and on on this 
                     interface. Default is true."
        DEFVAL { true }
        ::= { hpicfPimIfEntry 4 }

    hpicfPimIfPropagationDelay OBJECT-TYPE 
        SYNTAX      Integer32 (250..2000)
        UNITS       "milliseconds"
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "The value inserted into the LAN Prune Delay field of a 
                     LAN Prune Delay option on this interface. 
                     Default is 500 milliseconds."
        DEFVAL { 500 } 
        ::= { hpicfPimIfEntry 5 }

    hpicfPimIfOverrideInterval OBJECT-TYPE 
        SYNTAX      Integer32 (500..6000)
        UNITS       "milliseconds"
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "The value inserted into the Override Interval field of 
                     a LAN Prune Delay option on this interface. 
                     Default is 2500 milliseconds."
        DEFVAL { 2500 } 
        ::= { hpicfPimIfEntry 6 } 

    hpicfPimIfGenerationID OBJECT-TYPE 
        SYNTAX      TruthValue
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "Turns the Generation ID Option off and on on this 
                    interface. Default is false."
        DEFVAL { false } 
        ::= { hpicfPimIfEntry 7 }

    hpicfPimIfJoinPruneHoldtime OBJECT-TYPE
        SYNTAX      Unsigned32
        UNITS       "seconds"
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "The value inserted into the Holdtime field of a Join/
                    Prune message sent on this interface.  The value should
                    be 3.5 times pimInterfaceJoinPruneInterval.
                    Default is 210 seconds."
        DEFVAL { 210 }
        ::= { hpicfPimIfEntry 8 }

    hpicfPimIfGraftRetryInterval OBJECT-TYPE 
        SYNTAX      Integer32 (1..10)
        UNITS       "seconds"
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "The interval a PIM router waits for a Graft Ack before 
                    re-sending a Graft on this interface. 
                    Default is 3 seconds."
        DEFVAL { 3 }
        ::= { hpicfPimIfEntry 9 } 

    hpicfPimIfMaxGraftRetries OBJECT-TYPE 
        SYNTAX      Integer32 (1..10)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "The maximum number of times this router will re-send a 
                     Graft on this interface. Default is 2."
        DEFVAL { 2 }
        ::= { hpicfPimIfEntry 10 }

    hpicfPimIfSRTTLThreshold OBJECT-TYPE 
        SYNTAX      Unsigned32 
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "The Time To Live in a PIM-DM State Refresh message at
                    which it is not forwarded on this interface. Default is 0."
        DEFVAL { 0 }
        ::= { hpicfPimIfEntry 11 }

    hpicfPimIfLanDelayEnabled OBJECT-TYPE 
        SYNTAX      TruthValue
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "Evaluates to TRUE if all routers on this interface are
                    using the LAN Prune Delay Option."
        ::= { hpicfPimIfEntry 12 }

    hpicfPimIfSRCapable OBJECT-TYPE 
        SYNTAX      TruthValue
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "Evaluates to TRUE if all routers on this interface are
                    using the State Refresh Capable Option."
        ::= { hpicfPimIfEntry 13 }

    hpicfPimIfDRPriority OBJECT-TYPE
        SYNTAX      Unsigned32
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "The Designated Router Priority inserted into the DR
                    priority option on this interface. Default is 1."
        DEFVAL { 1 }
        ::= { hpicfPimIfEntry 14 }

    hpicfPimIfNBRTimeout OBJECT-TYPE
        SYNTAX      Integer32 (60..8000)
        UNITS       "seconds"
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "Time interval after which the router will consider a 
                    neighbour to not be present, if no PIM Hello messages 
                    arrived on the interface. Default is 180 seconds."
        DEFVAL { 180 }
        ::= { hpicfPimIfEntry 15 }

-- **********************************************************************
-- The Extensions to the PIM Component Table (RFC 2934)
-- **********************************************************************

    hpicfPimComponentTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF HpicfPimComponentEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "HP extensions to the pimComponentTable - the 
                    (conceptual) table containing objects specific to a
                    PIM domain. One row exists for each domain to which 
                    the router is connected. Typically, a PIM-SM router 
                    will be a member of exactly one domain, however, the 
                    table also supports routers which may form a border 
                    between two PIM-SM domains and do not forward Bootstrap 
                    messages between them."
        ::= { hpicfPim 7 }

    hpicfPimComponentEntry OBJECT-TYPE
        SYNTAX      HpicfPimComponentEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "HP extensions for an entry in the pimComponentTable."
        AUGMENTS    { pimComponentEntry }
        ::= { hpicfPimComponentTable 1 }

    HpicfPimComponentEntry ::=
        SEQUENCE {
            -- ------------------
            -- read-write objects
            -- ------------------
            hpicfPimComponentCBSRAdminStatus        INTEGER,
            hpicfPimComponentCBSRAddress            IpAddress,
            hpicfPimComponentCBSRPriority           Integer32,
            hpicfPimComponentCBSRHashMaskLength     Integer32,
            hpicfPimComponentCBSRMessageInterval    Integer32,
            hpicfPimComponentCRPPriority            Integer32,
            -- ------------------
            -- read-only objects
            -- ------------------
            hpicfPimComponentCRPAdvInterval         Unsigned32, 
            hpicfPimComponentBSRPriority            Unsigned32,
            hpicfPimComponentBSRHashMaskLength      Unsigned32,
            hpicfPimComponentBSRUpTime              TimeTicks,
            hpicfPimComponentBSRNextMessage         TimeTicks
        }

    hpicfPimComponentCBSRAdminStatus OBJECT-TYPE
        SYNTAX      INTEGER{
                        enable(1),
                        disable(2)
                    }
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "This objects specifies whether or not the router 
                    configured to be a Candidate BSR for the local 
                    PIM region. Default is disabled."
        DEFVAL      { disable }
        ::= { hpicfPimComponentEntry 1 }

    hpicfPimComponentCBSRAddress OBJECT-TYPE
        SYNTAX      IpAddress
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "The IP address the Candidate BSR router will advertise 
                    for the local PIM region."
        ::= { hpicfPimComponentEntry 2 }

    hpicfPimComponentCBSRPriority OBJECT-TYPE 
        SYNTAX      Integer32 (0..255)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "The priority for Candidate BSR router. In BSR election
                    process the candidate BSR with the highest (numerically 
                    bigger) priority becomes the BSR. If the priority values 
                    are the same, the router with the larger IP address is 
                    the BSR. Default is 0."
        DEFVAL { 0 }
        ::= { hpicfPimComponentEntry 3 }

    hpicfPimComponentCBSRHashMaskLength OBJECT-TYPE 
        SYNTAX      Integer32 (1..128)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "Specifies the length (in bits) of a multicast group
                    address to use when mapping a group to one of the 
                    candidate RPs from the RP-Set whose group-prefix 
                    includes the group. The recommended value for IPv4 
                    is 30, for IPv6 is 126. Default is 30."
        DEFVAL { 30 }
        ::= { hpicfPimComponentEntry 4 }

    hpicfPimComponentCBSRMessageInterval OBJECT-TYPE 
        SYNTAX      Integer32 (5..65535)
        UNITS       "seconds"
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "If this router is the elected BSR, then this is the 
                    interval for sending (multicast out) periodic Bootstrap 
                    (RP-Set) messages on all PIM SM interfaces.
                    Default is 60 seconds."
        DEFVAL { 60 }
        ::= { hpicfPimComponentEntry 5 }

    hpicfPimComponentCRPPriority OBJECT-TYPE 
        SYNTAX      Integer32 (0..255)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "The priority for the Candidate RP for the local PIM 
                    domain. Determines which Candidate RPs get selected by 
                    the BSR to be in the RP Set. The smaller value means 
                    the higher priority (a value of zero is the highest 
                    possible priority). Default is 192."
        DEFVAL { 192 }
        ::= { hpicfPimComponentEntry 6 }

    hpicfPimComponentCRPAdvInterval OBJECT-TYPE 
        SYNTAX      Unsigned32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The interval at which the Candidate RP transmits
                    (unicast to the elected BSR) advertise messages in
                    the local PIM domain."
        ::= { hpicfPimComponentEntry 7 }

    hpicfPimComponentBSRPriority OBJECT-TYPE 
        SYNTAX      Unsigned32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The priority of the Bootstrap Router (BSR) elected
                    for the local PIM region."
        ::= { hpicfPimComponentEntry 8 }

    hpicfPimComponentBSRHashMaskLength OBJECT-TYPE 
        SYNTAX      Unsigned32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The hash mask length of the elected Bootstrap 
                    Router (BSR)."
        ::= { hpicfPimComponentEntry 9 }

    hpicfPimComponentBSRUpTime OBJECT-TYPE 
        SYNTAX      TimeTicks
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "Length of time that the elected Bootstrap Router (BSR)
                    has been up."
        ::= { hpicfPimComponentEntry 10 }

    hpicfPimComponentBSRNextMessage OBJECT-TYPE 
        SYNTAX      TimeTicks
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "Time in which the next bootstrap message is due from 
                    the elected Bootstrap Router (BSR)."
        ::= { hpicfPimComponentEntry 11 }

-- **********************************************************************
-- PIM Notifications Trap Definitions
-- **********************************************************************

    hpicfPimHardMRTFull NOTIFICATION-TYPE
        STATUS      current
        DESCRIPTION "This notification signifies that the MRT table is 
                    full and the error has been originated by hardware. 
                    This trap should be generated whenever a multicast 
                    flow or MRT  entry cannot be added."
        ::= { hpicfPimTraps 1 }

    hpicfPimSoftMRTFull NOTIFICATION-TYPE
        STATUS      current
        DESCRIPTION "This notification signifies that the MRT table is 
                    full and the error has been originated by software. 
                    This trap should be generated whenever a multicast 
                    flow or MRT entry cannot be added."
        ::= { hpicfPimTraps 2 }

-- **********************************************************************
-- Conformance Information
-- **********************************************************************

    hpicfPimNotificationGroup NOTIFICATION-GROUP
        NOTIFICATIONS
                    { hpicfPimHardMRTFull,
                      hpicfPimSoftMRTFull }
        STATUS      current
        DESCRIPTION "A collection of notifications that extends 
                     notifications defined in RFC 2934 - used for signalling 
                     important PIM events."
        ::= { hpicfPimGroups 1 }

    hpicfPimBaseGroup OBJECT-GROUP
        OBJECTS     { hpicfPimAdminStatus,
                      hpicfPimStateRefreshInterval,
                      hpicfPimSPTThreshold,
                      hpicfPimTrapControl }
        STATUS      current
        DESCRIPTION "A collection of objects to support basic PIM 
                    configuration information on HP routers."
        ::= { hpicfPimGroups 2 }

    hpicfPimStaticRPSetMappingGroup OBJECT-GROUP
        OBJECTS     { hpicfPimStaticRPSetOverride,
                      hpicfPimStaticRPSetRowStatus }
        STATUS      current
        DESCRIPTION "A collection of objects to support management of
                    static Rendezvous Point (RP) to IP multicast group 
                    mappings."
        ::= { hpicfPimGroups 3 }

    hpicfPimSparseIfGroup OBJECT-GROUP
        OBJECTS     { hpicfPimIfAddress,
                      hpicfPimIfTrigHelloInterval,
                      hpicfPimIfHelloHoldtime,
                      hpicfPimIfLanPruneDelay,
                      hpicfPimIfPropagationDelay,
                      hpicfPimIfOverrideInterval,
                      hpicfPimIfGenerationID,
                      hpicfPimIfJoinPruneHoldtime,
                      hpicfPimIfLanDelayEnabled,
                      hpicfPimIfDRPriority,
                      hpicfPimIfNBRTimeout }
        STATUS      current
        DESCRIPTION "A collection of objects that extends objects defined
                    in pimInterfaceTable and used to support management of 
                    interfaces operating in PIM Sparse Mode."
        ::= { hpicfPimGroups 4 }

    hpicfPimDenseIfGroup OBJECT-GROUP
        OBJECTS     { hpicfPimIfAddress,
                      hpicfPimIfTrigHelloInterval,
                      hpicfPimIfHelloHoldtime,
                      hpicfPimIfLanPruneDelay,
                      hpicfPimIfPropagationDelay,
                      hpicfPimIfOverrideInterval,
                      hpicfPimIfGenerationID,
                      hpicfPimIfJoinPruneHoldtime,
                      hpicfPimIfGraftRetryInterval,
                      hpicfPimIfMaxGraftRetries,
                      hpicfPimIfSRTTLThreshold,
                      hpicfPimIfLanDelayEnabled,
                      hpicfPimIfSRCapable,
                      hpicfPimIfDRPriority }
        STATUS      current
        DESCRIPTION "A collection of objects that extends objects defined
                    in pimInterfaceTable and used to support management of 
                    interfaces operating in PIM Dense Mode."
        ::= { hpicfPimGroups 5 }

    hpicfPimComponentGroup OBJECT-GROUP
        OBJECTS     { hpicfPimComponentCBSRAdminStatus,
                      hpicfPimComponentCBSRAddress,
                      hpicfPimComponentCBSRPriority,
                      hpicfPimComponentCBSRHashMaskLength,
                      hpicfPimComponentCBSRMessageInterval,
                      hpicfPimComponentCRPPriority,
                      hpicfPimComponentCRPAdvInterval,
                      hpicfPimComponentBSRPriority,
                      hpicfPimComponentBSRHashMaskLength,
                      hpicfPimComponentBSRUpTime,
                      hpicfPimComponentBSRNextMessage }
        STATUS      current
        DESCRIPTION "A collection of objects that extends objects defined 
                    in pimComponentTable (RFC 2934)."
        ::= { hpicfPimGroups 6 }

-- **********************************************************************
-- Compliance statements
-- **********************************************************************

    hpicfPimSparseMIBCompliance MODULE-COMPLIANCE
        STATUS      current
        DESCRIPTION "The compliance statement for HP routers running
                    PIM Sparse Mode and implementing the HP-ICF-PIM MIB."
        MODULE  -- this module
            MANDATORY-GROUPS { hpicfPimBaseGroup,
                               hpicfPimStaticRPSetMappingGroup,
                               hpicfPimSparseIfGroup,
                               hpicfPimComponentGroup }
        ::= { hpicfPimCompliances 1 }

    hpicfPimDenseMIBCompliance MODULE-COMPLIANCE
        STATUS      current
        DESCRIPTION "The compliance statement for HP routers running
                    PIM Dense Mode and implementing the HP-ICF-PIM MIB."
        MODULE  -- this module
            MANDATORY-GROUPS { hpicfPimBaseGroup,
                               hpicfPimDenseIfGroup }
        ::= { hpicfPimCompliances 2 }

END