librenms-librenms/mibs/avtech/ROOMALERTST4E-MIB

--
--defines ROOMALERTST4E-MIB for SNMP agent extension of Room Alert ST4E
--Contents:	Global Registration Module
--		Room Alert OIDs - Enterprise 20916
--Version:	1.0.0 
--Date:		29 January 2008
--Developed By: AVTECH Software, Inc.

--
--Copyright (c) 2008 AVTECH Software, Inc.
--

ROOMALERTST4E-MIB DEFINITIONS ::= BEGIN


IMPORTS
	enterprises, IpAddress, Counter, TimeTicks
		FROM RFC1155-SMI
	OBJECT-TYPE
		FROM RFC-1212
	TRAP-TYPE 
		FROM RFC-1215;


avtech      OBJECT IDENTIFIER ::= { enterprises 20916 }
products      OBJECT IDENTIFIER ::= { avtech 1 }
ROOMALERTST4E      OBJECT IDENTIFIER ::= { products 6 }
sensors       OBJECT IDENTIFIER ::= { ROOMALERTST4E 1 }
signaltower		OBJECT IDENTIFIER ::= { ROOMALERTST4E 2 }
traps	      OBJECT IDENTIFIER ::= { ROOMALERTST4E 3 }
internal   OBJECT IDENTIFIER ::= { sensors 1 }
temperature   OBJECT IDENTIFIER ::= { internal 1 }
humidity   OBJECT IDENTIFIER ::= { internal 2 }
heat-index   OBJECT IDENTIFIER ::= { internal 3 }
digital   OBJECT IDENTIFIER ::= { sensors 2 }
digital-sen1   OBJECT IDENTIFIER ::= { digital 1 }
digital-sen2   OBJECT IDENTIFIER ::= { digital 2 }
switch   OBJECT IDENTIFIER ::= { sensors 3 }

 
-- Room Alert ST4E MIB
-- Parameters 


internal-tempf OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The internal temperature reading in Fahrenheit. Because the SNMP Protocol does not support floating point numbers, values are scaled by 100 and should be divided by 100 to get the actual value."
::= { temperature 1 }

internal-tempc OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The internal temperature reading in Celsius. Because the SNMP Protocol does not support floating point numbers, values are scaled by 100 and should be divided by 100 to get the actual value."
::= { temperature 2 }

internal-humidity OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The internal relative humidity reading in %RH. Because the SNMP Protocol does not support floating point numbers, values are scaled by 100 and should be divided by 100 to get the actual value."
::= { humidity 1 }

internal-heat-index OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The internal heat index reading in Fahrenheit. Because the SNMP Protocol does not support floating point numbers, values are scaled by 100 and should be divided by 100 to get the actual value."
::= { heat-index 1 }

digital-sen1-1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor, this value represents the Current reading in Amperage."
::= { digital-sen1 1 }

digital-sen1-2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Power reading in Watts."
::= { digital-sen1 2 }

digital-sen1-3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor, this value represents the Voltage reading in Volts."
::= { digital-sen1 3 }

digital-sen1-4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Reference reading in Volts."
::= { digital-sen1 4 }

digital-sen2-1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor, this value represents the Current reading in Amperage."
::= { digital-sen2 1 }

digital-sen2-2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Power reading in Watts."
::= { digital-sen2 2 }

digital-sen2-3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor, this value represents the Voltage reading in Volts."
::= { digital-sen2 3 }

digital-sen2-4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Reference reading in Volts."
::= { digital-sen2 4 }

switch-sen1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for switch sensor 1 (0 = OPEN, 1 = CLOSED)."
::= { switch 1 }

red-led OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-write
	STATUS		current
	DESCRIPTION	"The status of this Signal Tower element (0 = OFF, 1 = ON)."
::= { signaltower 1 }

amber-led OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-write
	STATUS		current
	DESCRIPTION	"The status of this Signal Tower element (0 = OFF, 1 = ON)."
::= { signaltower 2 }

green-led OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-write
	STATUS		current
	DESCRIPTION	"The status of this Signal Tower element (0 = OFF, 1 = ON)."
::= { signaltower 3 }

blue-led OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-write
	STATUS		current
	DESCRIPTION	"The status of this Signal Tower element (0 = OFF, 1 = ON)."
::= { signaltower 4 }

white-led OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-write
	STATUS		current
	DESCRIPTION	"The status of this Signal Tower element (0 = OFF, 1 = ON)."
::= { signaltower 5 }

alarm1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-write
	STATUS		current
	DESCRIPTION	"The status of this Signal Tower element (0 = OFF, 1 = ON)."
::= { signaltower 6 }

alarm2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-write
	STATUS		current
	DESCRIPTION	"The status of this Signal Tower element (0 = OFF, 1 = ON)."
::= { signaltower 7 }
	
alarmmessage OBJECT-TYPE
	SYNTAX  	OCTET STRING
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Last Alarm Message"
::= { traps 1 }	
	
	
-- ROOMALERTST4E TRAPS
	
room-alert-st4e-snmp-trap TRAP-TYPE
	ENTERPRISE	ROOMALERTST4E
	VARIABLES	{ alarmmessage }
	DESCRIPTION	"A room-alert-st4e-snmp-trap indicates that an alarm
			condition has occurred on the sensor indicated
			by the alarmmessage variable."
::= 2
END