librenms-librenms/mibs/CTRON-SFPS-CALL-MIB

CTRON-SFPS-CALL-MIB DEFINITIONS ::= BEGIN

--  sfps-call-mib.txt
--  Revision: 0.0.16
--
--  Part Number: 
--  Date: August 9, 1994


--  Cabletron Systems, Inc.
--  35 Industrial Way, P.O. Box 5005
--  Rochester, NH 03867-0505
--  (603) 332-9400
--  support@ctron.com

--  This module provides authoritative definitions for Cabletron's
--  enterprise specific Fast Packet Switching Services MIB.
--
--  This module will be extended, as required.
--

--  Cabletron Systems reserves the right to make changes in
--  specification and other information contained in this document
--  without prior notice.  The reader should consult Cabletron Systems
--  to determine whether any such changes have been made.
--
--  In no event shall Cabletron Systems be liable for any incidental,
--  indirect, special, or consequential damages whatsoever (including
--  but not limited to lost profits) arising out of or related to this
--  document or the information contained in it, even if Cabletron
--  Systems has been advised of, known, or should have known, the
--  possibility of such damages.
--
--  Cabletron grants vendors, end-users, and other interested parties
--  a non-exclusive license to use this Specification in connection
--  with the management of Cabletron products.
--  Copyright October 93 Cabletron Systems
--

 
IMPORTS
      OBJECT-TYPE
                FROM RFC-1212
      DisplayString
                FROM RFC1213-MIB
--      enterprises,
--      IpAddress, 
--      Counter, Gauge, 
      TimeTicks
                FROM RFC1155-SMI

--  These Objects are defined in the file sfps-inc.mib.txt.0.0.2
        sfpsSap, sfpsSapAPI, sfpsCallByTuple, sfpsCallTableStats
        
                FROM CTRON-SFPS-INCLUDE-MIB;

--  Textual Conventions

HexInteger ::= INTEGER
--  display this integer in hex format

--

--  SFPS Switch Agent Redirector Group
--  This group contains the objects that pertain to the SFPS Redirector.
--  This object receives redirected packets from the switch engine and
--  forwards them to the appropriate call processor stack. 



sfpsSapTable            OBJECT-TYPE
        SYNTAX  SEQUENCE OF SfpsSapTableEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "This table contains the registered (active) call processors
                indexed (indirectly) by address and address type supported."
        ::= { sfpsSap 1 }

sfpsSapTableEntry       OBJECT-TYPE
        SYNTAX  SfpsSapTableEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "Each entry contains information pertaining to an active
                call processor."
        INDEX   { sfpsSapTableTag, sfpsSapTableHash, sfpsSapTableHashIndex }
        ::= { sfpsSapTable 1 }

SfpsSapTableEntry       ::=
        SEQUENCE {
                sfpsSapTableTag                 INTEGER,
                sfpsSapTableHash                INTEGER,
                sfpsSapTableHashIndex           INTEGER,
                sfpsSapTableSourceCP            DisplayString,
                sfpsSapTableDestCP              DisplayString,
                        sfpsSapTableSAP                             DisplayString,
                        sfpsSapTableOperStatus                  INTEGER,
                        sfpsSapTableAdminStatus                 INTEGER,
                        sfpsSapTableStateTime                   TimeTicks,
                        sfpsSapTableDescription                 DisplayString,
                        sfpsSapTableNumAccepted                 INTEGER,
                        sfpsSapTableNumDropped                  INTEGER,
                        sfpsSapTableUnicastSap                  INTEGER,
                        sfpsSapTableNVStatus                    INTEGER
        }

sfpsSapTableTag         OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "A type tag used to sort and index the table entries."
        ::= { sfpsSapTableEntry 1 }

sfpsSapTableHash        OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "A hash of the sfpsSapTableAddress used to identify the 
                instance."
        ::= { sfpsSapTableEntry 2 }

sfpsSapTableHashIndex   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "A count of the non-unique sfpsSapTableAddress hashes used to
                identify the instance."
        ::= { sfpsSapTableEntry 3 }

sfpsSapTableSourceCP   OBJECT-TYPE
        SYNTAX  DisplayString
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The name of the call processor initiating the the SAP attempts
                for this particular SAP load."
        ::= { sfpsSapTableEntry 4 }

sfpsSapTableDestCP   OBJECT-TYPE
        SYNTAX  DisplayString
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The destination call processor that is registered for with this
                source call processor for the given SAP load."
        ::= { sfpsSapTableEntry 5 }

sfpsSapTableSAP   OBJECT-TYPE
        SYNTAX  DisplayString
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The value of the SAP in 0x format."
        ::= { sfpsSapTableEntry 6 }

sfpsSapTableOperStatus   OBJECT-TYPE
        SYNTAX  INTEGER {
                other(1),
                disable(2),
                enable(3)
                }
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Displays the Current OperStatus of the SAP entry."
        ::= { sfpsSapTableEntry 7 }

sfpsSapTableAdminStatus   OBJECT-TYPE
        SYNTAX  INTEGER {
                other(1),
                disable(2),
                enable(3)
                }
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Displays the Current AdminStatus of the SAP entry."
        ::= { sfpsSapTableEntry 8 }

sfpsSapTableStateTime   OBJECT-TYPE
        SYNTAX  TimeTicks
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Total number of SFPSElements stored in NVRAM for persistence."
        ::= { sfpsSapTableEntry 9 }

sfpsSapTableDescription   OBJECT-TYPE
        SYNTAX  DisplayString
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Text description of the entry."
        ::= { sfpsSapTableEntry 10 }

sfpsSapTableNumAccepted   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Number accepted by the SAP."
        ::= { sfpsSapTableEntry 11 }

sfpsSapTableNumDropped   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Number dropped by the SAP."
        ::= { sfpsSapTableEntry 12 }

sfpsSapTableUnicastSap   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                ""
        ::= { sfpsSapTableEntry 13 }

sfpsSapTableNVStatus   OBJECT-TYPE
        SYNTAX  INTEGER {
                other(1),
                disable(2),
                enable(3),
                unset(4)
                }
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Status in NVRAM  for persistence."
        ::= { sfpsSapTableEntry 14 }


-- SAP Table API                                                             

sfpsSapAPIVerb   OBJECT-TYPE
        SYNTAX  INTEGER {
                getStatus(1),
                next(2),
                first(3),
                disable(4),
                disableInNvram(5),
                enable(6),
                enableInNvram(7),
                clearFromNvram(8),
                clearAllNvram(9),
                resetStats(10),
                resetAllStats(11)
                }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "1 - getStatus -- The default verb. When the SourceCP, DestCP,
                 and SAP info are entered, this action will get the current
                 AdminStatus, OperStatus, and NvramStatus.
                (Must perform a mo_get after setting the above info to actually
                get the status info)
                2 - next -- Move to the next Entry in the SAP Table and Get the
                 status. If this operation is successful, the verb will stay
                 next, else it defaults to getStatus.
                3 - first -- Jump back to the First Entry in the SAP Table.
                4 - disable -- Disable the Current SAP Entry.
                This does not effect the Status of this Entry in Nvram.
                5 - disableInNvram -- Set the Current SAP Entries status to
                 Disabled in Nvram - This does not effect the Current Admin
                 Status for this SAP Entry.
                6 - enable -- Enable the Current SAP Entry.
                This does not effect the Status of this Entry in Nvram.
                7 - enableInNvram -- Set the Current SAP Entries status to
                Enabled in Nvram - This does not effect the Current Admin 
                Status for this SAP Entry.
                8 - clearFromNvram -- Clear the Current SAP Entry from Nvram 
                (if set).
                9 - clearAllNvram -- Clear all SAP Entries from Nvram.
                10 - resetStats -- Resets the Accepted/Dropped Stats for the
                Current/Entered SAP Entry.
                11 - resetAllStats -- Resets the Accepted/Dropped Stats for 
                all SAP Entries."
        ::= { sfpsSapAPI 1 }

sfpsSapAPISourceCP   OBJECT-TYPE
        SYNTAX  DisplayString
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "The name of the call processor initiating the the SAP attempts
                for this particular SAP load."
        ::= { sfpsSapAPI 2 }

sfpsSapAPIDestCP   OBJECT-TYPE
        SYNTAX  DisplayString
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "The destination call processor that is registered for with this
                source call processor for the given SAP load."
        ::= { sfpsSapAPI 3 }

sfpsSapAPISAP   OBJECT-TYPE
        SYNTAX  DisplayString
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "Enter in the SAP for the desired SAP Entry."
        ::= { sfpsSapAPI 4 }

sfpsSapAPINVStatus   OBJECT-TYPE
        SYNTAX  INTEGER {
                other(1),
                disable(2),
                enable(3),
                unset(4)
                }
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Displays the Current Admin Status of this SAP Entry saved 
                in Nvram."
        ::= { sfpsSapAPI 5 }

sfpsSapAPIAdminStatus   OBJECT-TYPE
        SYNTAX  INTEGER {
                other(1),
                disable(2),
                enable(3)
                }
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Displays the Current AdminStatus of the SAP Entry."
        ::= { sfpsSapAPI 6 }

sfpsSapAPIOperStatus   OBJECT-TYPE
        SYNTAX  INTEGER {
                other(1),
                disable(2),
                enable(3)
                }
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Displays the Current OperStatus of the SAP Entry."
        ::= { sfpsSapAPI 7 }

sfpsSapAPINvSet   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Total number of entries stored in NVRAM for persistence."
        ::= { sfpsSapAPI 8 }

sfpsSapAPINVTotal   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "Total number of entries allocated in NVRAM. The 
                switch will always allocate enough space in NVRAM for
                the number of elements. That is, NvTotal will always be
                greater than or equal to NvSet."
        ::= { sfpsSapAPI 9 }

sfpsSapAPINumAccept   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                ""
        ::= { sfpsSapAPI 10 }

sfpsSapAPINvDiscard   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                ""
        ::= { sfpsSapAPI 11 }

sfpsSapAPIDefaultStatus   OBJECT-TYPE
        SYNTAX  INTEGER {
                other(1),
                disable(2),
                enable(3)
                }
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                ""
        ::= { sfpsSapAPI 12 }


--



--  SFPS Agent Call Processor Groups

--  SFPS Call by Tuple  Group
--  This group contains the objects that pertain to call tag. 
--  This group should eventually replace the Call tag table

sfpsCallByTupleTable    OBJECT-TYPE
        SYNTAX  SEQUENCE OF SfpsCallByTupleEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "This table contains the call tags, and call states 
                indexed (indirectly) by switch tuple (in port, src 
                address, dst address)"
        ::= { sfpsCallByTuple 1 }

sfpsCallByTupleEntry    OBJECT-TYPE
        SYNTAX  SfpsCallByTupleEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "Each entry contains information pertaining to a call tag
                and its state."
        INDEX   { sfpsCallByTupleInPort, sfpsCallByTupleSrcHash,
                sfpsCallByTupleDstHash, sfpsCallByTupleHashIndex }
        ::= { sfpsCallByTupleTable 1 }

SfpsCallByTupleEntry    ::=
        SEQUENCE {
                sfpsCallByTupleInPort                   INTEGER,
                sfpsCallByTupleSrcHash                  INTEGER,
                sfpsCallByTupleDstHash                  INTEGER,
                sfpsCallByTupleHashIndex                INTEGER,
                sfpsCallByTupleBotSrcType               DisplayString,
                sfpsCallByTupleBotSrcAddress            DisplayString,
                sfpsCallByTupleBotDstType               DisplayString,
                sfpsCallByTupleBotDstAddress            DisplayString,
                sfpsCallByTupleTopSrcType               DisplayString,
                sfpsCallByTupleTopSrcAddress            DisplayString,
                sfpsCallByTupleTopDstType               DisplayString,
                sfpsCallByTupleTopDstAddress            DisplayString,
                sfpsCallByTupleCallProcName             DisplayString,
                sfpsCallByTupleCallTag                  HexInteger,
                sfpsCallByTupleCallState                DisplayString,
                sfpsCallByTupleTimeRemaining            TimeTicks
        }

sfpsCallByTupleInPort   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Port of the switch on which the packet associated with 
                this call tag was seen."
        ::= { sfpsCallByTupleEntry 1 }

sfpsCallByTupleSrcHash  OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "A hash of sfpsCallByTupleBotSrcAddress used to identify the 
                instance."
        ::= { sfpsCallByTupleEntry 2 }

sfpsCallByTupleDstHash  OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "A hash of sfpsCallByTupleTopDstAddress used to identify the 
                instance."
        ::= { sfpsCallByTupleEntry 3 }

sfpsCallByTupleHashIndex        OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "A count of non-unique sfpsCallByTupleSrcHash and 
                sfpsCallByTupleDstHash pairs used to identify the instance."
        ::= { sfpsCallByTupleEntry 4 }

sfpsCallByTupleBotSrcType OBJECT-TYPE
        SYNTAX  DisplayString
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The source address type of the lowest known protocol 
                layer."
        ::= { sfpsCallByTupleEntry 5 }

sfpsCallByTupleBotSrcAddress    OBJECT-TYPE
        SYNTAX  DisplayString
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The source address value of the lowest known protocol 
                layer."
        ::= { sfpsCallByTupleEntry 6 }

sfpsCallByTupleBotDstType OBJECT-TYPE
        SYNTAX  DisplayString
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The destination address type of the lowest known 
                protocol layer."
        ::= { sfpsCallByTupleEntry 7 }

sfpsCallByTupleBotDstAddress    OBJECT-TYPE
        SYNTAX  DisplayString
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The destination address value of the lowest known 
                protocol layer."
        ::= { sfpsCallByTupleEntry 8 }

sfpsCallByTupleTopSrcType OBJECT-TYPE
        SYNTAX  DisplayString
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The source address type of the highest learned protocol 
                layer."
        ::= { sfpsCallByTupleEntry 9 }

sfpsCallByTupleTopSrcAddress    OBJECT-TYPE
        SYNTAX  DisplayString
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The source address value of the highest learned protocol 
                layer."
        ::= { sfpsCallByTupleEntry 10 }

sfpsCallByTupleTopDstType OBJECT-TYPE
        SYNTAX  DisplayString
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The destination address type of the highest learned 
                protocol layer."
        ::= { sfpsCallByTupleEntry 11 }

sfpsCallByTupleTopDstAddress    OBJECT-TYPE
        SYNTAX  DisplayString
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The destination address value of the highest learned 
                protocol layer."
        ::= { sfpsCallByTupleEntry 12 }

sfpsCallByTupleCallProcName     OBJECT-TYPE
        SYNTAX  DisplayString
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The name of the call processor responsible for all 
                signaling for this packet/call tag."
        ::= { sfpsCallByTupleEntry 13 }

sfpsCallByTupleCallTag  OBJECT-TYPE
        SYNTAX  HexInteger
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The number used to reference this packet and its 
                associated calls."
        ::= { sfpsCallByTupleEntry 14 }

sfpsCallByTupleCallState        OBJECT-TYPE
        SYNTAX  DisplayString
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The current state of the packet in the call processor."
        ::= { sfpsCallByTupleEntry 15 }

sfpsCallByTupleTimeRemaining    OBJECT-TYPE
        SYNTAX  TimeTicks
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The number of time ticks remaining before this entry's
                timer expires and it is removed from the table."
        ::= { sfpsCallByTupleEntry 16 }


sfpsCallTableStatsRam   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION     
                "The number of bytes used by the Call Table."
        ::= { sfpsCallTableStats 1 }

sfpsCallTableStatsSize  OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION     
                "The number of entries in the Call Table."
        ::= { sfpsCallTableStats 2 }

sfpsCallTableStatsInUse OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION     
                "The current number of calls in use. A call goes into this
                table only if it is being blocked (waiting for resolve or
                sent new user)."
        ::= { sfpsCallTableStats 3 }

sfpsCallTableStatsMax   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION     
                "The maximum number of calls that the switch maintained."
        ::= { sfpsCallTableStats 4 }

sfpsCallTableStatsTotMisses     OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION     
                "The number of times that there were no calls available
                 in the Call Table. This would be the number of calls that
                 had to be dropped."
        ::= { sfpsCallTableStats 5 }

sfpsCallTableStatsMissStart     OBJECT-TYPE
        SYNTAX  TimeTicks
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION     
                "Time when last miss occurred"
        ::= { sfpsCallTableStats 7 }

sfpsCallTableStatsMissStop      OBJECT-TYPE
        SYNTAX  TimeTicks
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION     
                "Time when missing stopped"
        ::= { sfpsCallTableStats 8 }

sfpsCallTableStatsLastMiss      OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION     
                "Number of calls dropped in last miss,  also write 0 to files"
        ::= { sfpsCallTableStats 9 }

END