feature: Wireless Sensors Overhaul (#6471)
* feature: Wireless Sensors
Includes client counts for ios and unifi
Graphing could use some improvement.
Alerting and threshold ui not implemented
WIP: starting OO based wireless sensors.
Class based functionality working
remove old functional files
add schema file
discovery needs to be enabled, not polling
fix up schema
fix Unifi discovery not returning an array
Add some debug when discovering a sensor.
Fix style.
Add missing semicolin
Add a null object (Generic) for OS.
Fill out some phpdocs
Re-organized code
Each sensor type now has it's own discovery and polling interface
Custom polling tested with Unifi CCQ
Left to do:
Implement UI (Graphs and Custom thresholds)
Alerting
Testing
Fix event message text
Remove runDiscovery and runPolling from OS, they are unused and don't belong there.
Cleanups/docs
Missed this file.
Remove the requirement to fetch the current value to check validity.
Do that automatically if current is not specified
A few cleanups here and there
First pass at graphing.
device_ and wireless_ graphs added.
Add RouterOS support
Singleton OS instance isn't required right now.
Remove that to allow some memory to be freed.
Add wireless to the device list metrics.
Make all metrics clickable
Tweak graphs a bit
Implement limit configuration page.
Use sensors page as common code instead of duplicating.
Clean up some javascript interactions: Allow enter on values to save. Cancel if update is not needed. Enable the clear custom button after setting a custom value.
Add some wireless alert rules to the library.
Add documentation.
Add unifi client counts by ssid in addition to radio.
Optimize Sensor polling a bit.
Add HP MSM clients support (for full controller)
Fix function accessibility
Formalize the discovery and poller interfaces.
Add Xirrus clients and noise floor
move module interfaces to a more appropriate place.
push caching code up to os, unsure about this do to the limitations
No point in selectively enabling wireless discovery. We only discover if the device supports something.
Add RSSI, Power, and Rate.
Add these sensors for Ubnt Airos.
Clean up some copyrights.
Reduce the amount of files need to add new types.
Leave graph files for consistency and to allow customization.
Remove the old wifi clients graph completely.
ciscowlc should have improved counts (total and per-ssid)
Schema didn't get added.
Impelement the rest of the AirOS sensors
Reformat and re-organize the Airos.php class.
Add several UBNT AirFiber sensors
A few fixes add links to the section headers
Add HP MSM mibs.
* Schema file got dropped in rebase.
* Add wireless menu to view sensors across all devices.
Icons in the menu need help :/
* Add HeliOS, Mimosa, and Siklu support
Sensors added SNR + Noise
* Add power and utilization to Unifi
* Update polling to prefetch all sensor data in a few snmp requests as possible
* Add Extendair: tx+rx power, aggregate rate, frequency
* Add a check for duplicate sensors in discovery. Just print an error for now.
* Add Bit Error Ratio (named error-ratio to allow for bit error rate to be added if needed)
Fix an incorrect link in the wireless sensors table
* Add error rate and change all bps and Hz to use si units
* Fixes to limits and frequency display
* Fix overview graph frequency display
A few decimal place tweaks
* Don't allow switching sensor and wireless-sensor graphs, it doesn't work.
Change individual distance graphs to use si units
* Go through the OS and make sure I got all the sensors I can (probably missed some still)
Because pollWirelessChannelAsFrequency() is generic and a little complex, so pull it up to OS.
Message to help developers adding supports that don't return an array from discover functions.
* Fix some issues
* Remove noise and signal for now at least
A couple more fixes
Add a notification
* Oopsie
* Bonus AirFiber sensors
2017-05-01 23:49:11 -05:00
|
|
|
<?php
|
|
|
|
|
|
|
|
/*
|
|
|
|
* LibreNMS
|
|
|
|
*
|
|
|
|
* Copyright (c) 2014 Neil Lathwood <https://github.com/laf/ http://www.lathwood.co.uk>
|
|
|
|
* Copyright (c) 2017 Tony Murray <https://github.com/murrant>
|
2018-09-16 19:23:12 +02:00
|
|
|
* Copyright (c) 2018 TheGreatDoc <https://github.com/TheGreatDoc>
|
feature: Wireless Sensors Overhaul (#6471)
* feature: Wireless Sensors
Includes client counts for ios and unifi
Graphing could use some improvement.
Alerting and threshold ui not implemented
WIP: starting OO based wireless sensors.
Class based functionality working
remove old functional files
add schema file
discovery needs to be enabled, not polling
fix up schema
fix Unifi discovery not returning an array
Add some debug when discovering a sensor.
Fix style.
Add missing semicolin
Add a null object (Generic) for OS.
Fill out some phpdocs
Re-organized code
Each sensor type now has it's own discovery and polling interface
Custom polling tested with Unifi CCQ
Left to do:
Implement UI (Graphs and Custom thresholds)
Alerting
Testing
Fix event message text
Remove runDiscovery and runPolling from OS, they are unused and don't belong there.
Cleanups/docs
Missed this file.
Remove the requirement to fetch the current value to check validity.
Do that automatically if current is not specified
A few cleanups here and there
First pass at graphing.
device_ and wireless_ graphs added.
Add RouterOS support
Singleton OS instance isn't required right now.
Remove that to allow some memory to be freed.
Add wireless to the device list metrics.
Make all metrics clickable
Tweak graphs a bit
Implement limit configuration page.
Use sensors page as common code instead of duplicating.
Clean up some javascript interactions: Allow enter on values to save. Cancel if update is not needed. Enable the clear custom button after setting a custom value.
Add some wireless alert rules to the library.
Add documentation.
Add unifi client counts by ssid in addition to radio.
Optimize Sensor polling a bit.
Add HP MSM clients support (for full controller)
Fix function accessibility
Formalize the discovery and poller interfaces.
Add Xirrus clients and noise floor
move module interfaces to a more appropriate place.
push caching code up to os, unsure about this do to the limitations
No point in selectively enabling wireless discovery. We only discover if the device supports something.
Add RSSI, Power, and Rate.
Add these sensors for Ubnt Airos.
Clean up some copyrights.
Reduce the amount of files need to add new types.
Leave graph files for consistency and to allow customization.
Remove the old wifi clients graph completely.
ciscowlc should have improved counts (total and per-ssid)
Schema didn't get added.
Impelement the rest of the AirOS sensors
Reformat and re-organize the Airos.php class.
Add several UBNT AirFiber sensors
A few fixes add links to the section headers
Add HP MSM mibs.
* Schema file got dropped in rebase.
* Add wireless menu to view sensors across all devices.
Icons in the menu need help :/
* Add HeliOS, Mimosa, and Siklu support
Sensors added SNR + Noise
* Add power and utilization to Unifi
* Update polling to prefetch all sensor data in a few snmp requests as possible
* Add Extendair: tx+rx power, aggregate rate, frequency
* Add a check for duplicate sensors in discovery. Just print an error for now.
* Add Bit Error Ratio (named error-ratio to allow for bit error rate to be added if needed)
Fix an incorrect link in the wireless sensors table
* Add error rate and change all bps and Hz to use si units
* Fixes to limits and frequency display
* Fix overview graph frequency display
A few decimal place tweaks
* Don't allow switching sensor and wireless-sensor graphs, it doesn't work.
Change individual distance graphs to use si units
* Go through the OS and make sure I got all the sensors I can (probably missed some still)
Because pollWirelessChannelAsFrequency() is generic and a little complex, so pull it up to OS.
Message to help developers adding supports that don't return an array from discover functions.
* Fix some issues
* Remove noise and signal for now at least
A couple more fixes
Add a notification
* Oopsie
* Bonus AirFiber sensors
2017-05-01 23:49:11 -05:00
|
|
|
*
|
|
|
|
* This program is free software: you can redistribute it and/or modify it
|
|
|
|
* under the terms of the GNU General Public License as published by the
|
|
|
|
* Free Software Foundation, either version 3 of the License, or (at your
|
|
|
|
* option) any later version. Please see LICENSE.txt at the top level of
|
|
|
|
* the source code distribution for details.
|
|
|
|
*/
|
|
|
|
|
|
|
|
// FUA
|
|
|
|
echo "<h3>$title</h3>";
|
|
|
|
?>
|
|
|
|
|
|
|
|
<form class="form-inline">
|
|
|
|
<table class="table table-hover table-condensed table-bordered">
|
|
|
|
<tr class="info">
|
|
|
|
<th>Class</th>
|
|
|
|
<th>Type</th>
|
|
|
|
<th>Desc</th>
|
|
|
|
<th>Current</th>
|
|
|
|
<th class="col-sm-1">High</th>
|
2018-09-16 19:23:12 +02:00
|
|
|
<th class="col-sm-1">High warn</th>
|
|
|
|
<th class="col-sm-1">Low warn</th>
|
feature: Wireless Sensors Overhaul (#6471)
* feature: Wireless Sensors
Includes client counts for ios and unifi
Graphing could use some improvement.
Alerting and threshold ui not implemented
WIP: starting OO based wireless sensors.
Class based functionality working
remove old functional files
add schema file
discovery needs to be enabled, not polling
fix up schema
fix Unifi discovery not returning an array
Add some debug when discovering a sensor.
Fix style.
Add missing semicolin
Add a null object (Generic) for OS.
Fill out some phpdocs
Re-organized code
Each sensor type now has it's own discovery and polling interface
Custom polling tested with Unifi CCQ
Left to do:
Implement UI (Graphs and Custom thresholds)
Alerting
Testing
Fix event message text
Remove runDiscovery and runPolling from OS, they are unused and don't belong there.
Cleanups/docs
Missed this file.
Remove the requirement to fetch the current value to check validity.
Do that automatically if current is not specified
A few cleanups here and there
First pass at graphing.
device_ and wireless_ graphs added.
Add RouterOS support
Singleton OS instance isn't required right now.
Remove that to allow some memory to be freed.
Add wireless to the device list metrics.
Make all metrics clickable
Tweak graphs a bit
Implement limit configuration page.
Use sensors page as common code instead of duplicating.
Clean up some javascript interactions: Allow enter on values to save. Cancel if update is not needed. Enable the clear custom button after setting a custom value.
Add some wireless alert rules to the library.
Add documentation.
Add unifi client counts by ssid in addition to radio.
Optimize Sensor polling a bit.
Add HP MSM clients support (for full controller)
Fix function accessibility
Formalize the discovery and poller interfaces.
Add Xirrus clients and noise floor
move module interfaces to a more appropriate place.
push caching code up to os, unsure about this do to the limitations
No point in selectively enabling wireless discovery. We only discover if the device supports something.
Add RSSI, Power, and Rate.
Add these sensors for Ubnt Airos.
Clean up some copyrights.
Reduce the amount of files need to add new types.
Leave graph files for consistency and to allow customization.
Remove the old wifi clients graph completely.
ciscowlc should have improved counts (total and per-ssid)
Schema didn't get added.
Impelement the rest of the AirOS sensors
Reformat and re-organize the Airos.php class.
Add several UBNT AirFiber sensors
A few fixes add links to the section headers
Add HP MSM mibs.
* Schema file got dropped in rebase.
* Add wireless menu to view sensors across all devices.
Icons in the menu need help :/
* Add HeliOS, Mimosa, and Siklu support
Sensors added SNR + Noise
* Add power and utilization to Unifi
* Update polling to prefetch all sensor data in a few snmp requests as possible
* Add Extendair: tx+rx power, aggregate rate, frequency
* Add a check for duplicate sensors in discovery. Just print an error for now.
* Add Bit Error Ratio (named error-ratio to allow for bit error rate to be added if needed)
Fix an incorrect link in the wireless sensors table
* Add error rate and change all bps and Hz to use si units
* Fixes to limits and frequency display
* Fix overview graph frequency display
A few decimal place tweaks
* Don't allow switching sensor and wireless-sensor graphs, it doesn't work.
Change individual distance graphs to use si units
* Go through the OS and make sure I got all the sensors I can (probably missed some still)
Because pollWirelessChannelAsFrequency() is generic and a little complex, so pull it up to OS.
Message to help developers adding supports that don't return an array from discover functions.
* Fix some issues
* Remove noise and signal for now at least
A couple more fixes
Add a notification
* Oopsie
* Bonus AirFiber sensors
2017-05-01 23:49:11 -05:00
|
|
|
<th class="col-sm-1">Low</th>
|
|
|
|
<th class="col-sm-2">Alerts</th>
|
|
|
|
<th></th>
|
|
|
|
</tr>
|
|
|
|
<?php
|
|
|
|
$rollback = array();
|
|
|
|
foreach (dbFetchRows("SELECT * FROM `$table` WHERE `device_id` = ? AND `sensor_deleted`='0'", array($device['device_id'])) as $sensor) {
|
|
|
|
$rollback[] = array(
|
|
|
|
'sensor_id' => $sensor['sensor_id'],
|
|
|
|
'sensor_limit' => $sensor['sensor_limit'],
|
2018-09-16 19:23:12 +02:00
|
|
|
'sensor_limit_warn' => $sensor['sensor_limit_warn'],
|
|
|
|
'sensor_limit_low_warn' => $sensor['sensor_limit_low_warn'],
|
feature: Wireless Sensors Overhaul (#6471)
* feature: Wireless Sensors
Includes client counts for ios and unifi
Graphing could use some improvement.
Alerting and threshold ui not implemented
WIP: starting OO based wireless sensors.
Class based functionality working
remove old functional files
add schema file
discovery needs to be enabled, not polling
fix up schema
fix Unifi discovery not returning an array
Add some debug when discovering a sensor.
Fix style.
Add missing semicolin
Add a null object (Generic) for OS.
Fill out some phpdocs
Re-organized code
Each sensor type now has it's own discovery and polling interface
Custom polling tested with Unifi CCQ
Left to do:
Implement UI (Graphs and Custom thresholds)
Alerting
Testing
Fix event message text
Remove runDiscovery and runPolling from OS, they are unused and don't belong there.
Cleanups/docs
Missed this file.
Remove the requirement to fetch the current value to check validity.
Do that automatically if current is not specified
A few cleanups here and there
First pass at graphing.
device_ and wireless_ graphs added.
Add RouterOS support
Singleton OS instance isn't required right now.
Remove that to allow some memory to be freed.
Add wireless to the device list metrics.
Make all metrics clickable
Tweak graphs a bit
Implement limit configuration page.
Use sensors page as common code instead of duplicating.
Clean up some javascript interactions: Allow enter on values to save. Cancel if update is not needed. Enable the clear custom button after setting a custom value.
Add some wireless alert rules to the library.
Add documentation.
Add unifi client counts by ssid in addition to radio.
Optimize Sensor polling a bit.
Add HP MSM clients support (for full controller)
Fix function accessibility
Formalize the discovery and poller interfaces.
Add Xirrus clients and noise floor
move module interfaces to a more appropriate place.
push caching code up to os, unsure about this do to the limitations
No point in selectively enabling wireless discovery. We only discover if the device supports something.
Add RSSI, Power, and Rate.
Add these sensors for Ubnt Airos.
Clean up some copyrights.
Reduce the amount of files need to add new types.
Leave graph files for consistency and to allow customization.
Remove the old wifi clients graph completely.
ciscowlc should have improved counts (total and per-ssid)
Schema didn't get added.
Impelement the rest of the AirOS sensors
Reformat and re-organize the Airos.php class.
Add several UBNT AirFiber sensors
A few fixes add links to the section headers
Add HP MSM mibs.
* Schema file got dropped in rebase.
* Add wireless menu to view sensors across all devices.
Icons in the menu need help :/
* Add HeliOS, Mimosa, and Siklu support
Sensors added SNR + Noise
* Add power and utilization to Unifi
* Update polling to prefetch all sensor data in a few snmp requests as possible
* Add Extendair: tx+rx power, aggregate rate, frequency
* Add a check for duplicate sensors in discovery. Just print an error for now.
* Add Bit Error Ratio (named error-ratio to allow for bit error rate to be added if needed)
Fix an incorrect link in the wireless sensors table
* Add error rate and change all bps and Hz to use si units
* Fixes to limits and frequency display
* Fix overview graph frequency display
A few decimal place tweaks
* Don't allow switching sensor and wireless-sensor graphs, it doesn't work.
Change individual distance graphs to use si units
* Go through the OS and make sure I got all the sensors I can (probably missed some still)
Because pollWirelessChannelAsFrequency() is generic and a little complex, so pull it up to OS.
Message to help developers adding supports that don't return an array from discover functions.
* Fix some issues
* Remove noise and signal for now at least
A couple more fixes
Add a notification
* Oopsie
* Bonus AirFiber sensors
2017-05-01 23:49:11 -05:00
|
|
|
'sensor_limit_low' => $sensor['sensor_limit_low'],
|
|
|
|
'sensor_alert' => $sensor['sensor_alert'],
|
|
|
|
);
|
|
|
|
if ($sensor['sensor_alert'] == 1) {
|
|
|
|
$alert_status = 'checked';
|
|
|
|
} else {
|
|
|
|
$alert_status = '';
|
|
|
|
}
|
|
|
|
|
|
|
|
if ($sensor['sensor_custom'] == 'No') {
|
|
|
|
$custom = 'disabled';
|
|
|
|
} else {
|
|
|
|
$custom = '';
|
|
|
|
}
|
|
|
|
|
|
|
|
echo '
|
|
|
|
<tr>
|
|
|
|
<td>'.$sensor['sensor_class'].'</td>
|
|
|
|
<td>'.$sensor['sensor_type'].'</td>
|
|
|
|
<td>'.$sensor['sensor_descr'].'</td>
|
|
|
|
<td>'.$sensor['sensor_current'].'</td>
|
|
|
|
<td>
|
|
|
|
<div class="form-group has-feedback">
|
|
|
|
<input type="text" class="form-control input-sm sensor" id="high-'.$sensor['device_id'].'" data-device_id="'.$sensor['device_id'].'" data-value_type="sensor_limit" data-sensor_id="'.$sensor['sensor_id'].'" value="'.$sensor['sensor_limit'].'">
|
2018-09-16 19:23:12 +02:00
|
|
|
</div>
|
|
|
|
</td>
|
|
|
|
<td>
|
|
|
|
<div class="form-group has-feedback">
|
|
|
|
<input type="text" class="form-control input-sm sensor" id="high-'.$sensor['device_id'].'-warn" data-device_id="'.$sensor['device_id'].'" data-value_type="sensor_limit_warn" data-sensor_id="'.$sensor['sensor_id'].'" value="'.$sensor['sensor_limit_warn'].'">
|
|
|
|
</div>
|
|
|
|
</td>
|
|
|
|
<td>
|
|
|
|
<div class="form-group has-feedback">
|
|
|
|
<input type="text" class="form-control input-sm sensor" id="low-'.$sensor['device_id'].'-warn" data-device_id="'.$sensor['device_id'].'" data-value_type="sensor_limit_low_warn" data-sensor_id="'.$sensor['sensor_id'].'" value="'.$sensor['sensor_limit_low_warn'].'">
|
feature: Wireless Sensors Overhaul (#6471)
* feature: Wireless Sensors
Includes client counts for ios and unifi
Graphing could use some improvement.
Alerting and threshold ui not implemented
WIP: starting OO based wireless sensors.
Class based functionality working
remove old functional files
add schema file
discovery needs to be enabled, not polling
fix up schema
fix Unifi discovery not returning an array
Add some debug when discovering a sensor.
Fix style.
Add missing semicolin
Add a null object (Generic) for OS.
Fill out some phpdocs
Re-organized code
Each sensor type now has it's own discovery and polling interface
Custom polling tested with Unifi CCQ
Left to do:
Implement UI (Graphs and Custom thresholds)
Alerting
Testing
Fix event message text
Remove runDiscovery and runPolling from OS, they are unused and don't belong there.
Cleanups/docs
Missed this file.
Remove the requirement to fetch the current value to check validity.
Do that automatically if current is not specified
A few cleanups here and there
First pass at graphing.
device_ and wireless_ graphs added.
Add RouterOS support
Singleton OS instance isn't required right now.
Remove that to allow some memory to be freed.
Add wireless to the device list metrics.
Make all metrics clickable
Tweak graphs a bit
Implement limit configuration page.
Use sensors page as common code instead of duplicating.
Clean up some javascript interactions: Allow enter on values to save. Cancel if update is not needed. Enable the clear custom button after setting a custom value.
Add some wireless alert rules to the library.
Add documentation.
Add unifi client counts by ssid in addition to radio.
Optimize Sensor polling a bit.
Add HP MSM clients support (for full controller)
Fix function accessibility
Formalize the discovery and poller interfaces.
Add Xirrus clients and noise floor
move module interfaces to a more appropriate place.
push caching code up to os, unsure about this do to the limitations
No point in selectively enabling wireless discovery. We only discover if the device supports something.
Add RSSI, Power, and Rate.
Add these sensors for Ubnt Airos.
Clean up some copyrights.
Reduce the amount of files need to add new types.
Leave graph files for consistency and to allow customization.
Remove the old wifi clients graph completely.
ciscowlc should have improved counts (total and per-ssid)
Schema didn't get added.
Impelement the rest of the AirOS sensors
Reformat and re-organize the Airos.php class.
Add several UBNT AirFiber sensors
A few fixes add links to the section headers
Add HP MSM mibs.
* Schema file got dropped in rebase.
* Add wireless menu to view sensors across all devices.
Icons in the menu need help :/
* Add HeliOS, Mimosa, and Siklu support
Sensors added SNR + Noise
* Add power and utilization to Unifi
* Update polling to prefetch all sensor data in a few snmp requests as possible
* Add Extendair: tx+rx power, aggregate rate, frequency
* Add a check for duplicate sensors in discovery. Just print an error for now.
* Add Bit Error Ratio (named error-ratio to allow for bit error rate to be added if needed)
Fix an incorrect link in the wireless sensors table
* Add error rate and change all bps and Hz to use si units
* Fixes to limits and frequency display
* Fix overview graph frequency display
A few decimal place tweaks
* Don't allow switching sensor and wireless-sensor graphs, it doesn't work.
Change individual distance graphs to use si units
* Go through the OS and make sure I got all the sensors I can (probably missed some still)
Because pollWirelessChannelAsFrequency() is generic and a little complex, so pull it up to OS.
Message to help developers adding supports that don't return an array from discover functions.
* Fix some issues
* Remove noise and signal for now at least
A couple more fixes
Add a notification
* Oopsie
* Bonus AirFiber sensors
2017-05-01 23:49:11 -05:00
|
|
|
</div>
|
|
|
|
</td>
|
|
|
|
<td>
|
|
|
|
<div class="form-group has-feedback">
|
|
|
|
<input type="text" class="form-control input-sm sensor" id="low-'.$sensor['device_id'].'" data-device_id="'.$sensor['device_id'].'" data-value_type="sensor_limit_low" data-sensor_id="'.$sensor['sensor_id'].'" value="'.$sensor['sensor_limit_low'].'">
|
|
|
|
</div>
|
|
|
|
</td>
|
|
|
|
<td>
|
2018-09-16 19:23:12 +02:00
|
|
|
<input type="checkbox" name="alert-status" data-device_id="'.$sensor['device_id'].'" data-sensor_id="'.$sensor['sensor_id'].'" data-sensor_desc="'.$sensor['sensor_descr'].'" '.$alert_status.'>
|
feature: Wireless Sensors Overhaul (#6471)
* feature: Wireless Sensors
Includes client counts for ios and unifi
Graphing could use some improvement.
Alerting and threshold ui not implemented
WIP: starting OO based wireless sensors.
Class based functionality working
remove old functional files
add schema file
discovery needs to be enabled, not polling
fix up schema
fix Unifi discovery not returning an array
Add some debug when discovering a sensor.
Fix style.
Add missing semicolin
Add a null object (Generic) for OS.
Fill out some phpdocs
Re-organized code
Each sensor type now has it's own discovery and polling interface
Custom polling tested with Unifi CCQ
Left to do:
Implement UI (Graphs and Custom thresholds)
Alerting
Testing
Fix event message text
Remove runDiscovery and runPolling from OS, they are unused and don't belong there.
Cleanups/docs
Missed this file.
Remove the requirement to fetch the current value to check validity.
Do that automatically if current is not specified
A few cleanups here and there
First pass at graphing.
device_ and wireless_ graphs added.
Add RouterOS support
Singleton OS instance isn't required right now.
Remove that to allow some memory to be freed.
Add wireless to the device list metrics.
Make all metrics clickable
Tweak graphs a bit
Implement limit configuration page.
Use sensors page as common code instead of duplicating.
Clean up some javascript interactions: Allow enter on values to save. Cancel if update is not needed. Enable the clear custom button after setting a custom value.
Add some wireless alert rules to the library.
Add documentation.
Add unifi client counts by ssid in addition to radio.
Optimize Sensor polling a bit.
Add HP MSM clients support (for full controller)
Fix function accessibility
Formalize the discovery and poller interfaces.
Add Xirrus clients and noise floor
move module interfaces to a more appropriate place.
push caching code up to os, unsure about this do to the limitations
No point in selectively enabling wireless discovery. We only discover if the device supports something.
Add RSSI, Power, and Rate.
Add these sensors for Ubnt Airos.
Clean up some copyrights.
Reduce the amount of files need to add new types.
Leave graph files for consistency and to allow customization.
Remove the old wifi clients graph completely.
ciscowlc should have improved counts (total and per-ssid)
Schema didn't get added.
Impelement the rest of the AirOS sensors
Reformat and re-organize the Airos.php class.
Add several UBNT AirFiber sensors
A few fixes add links to the section headers
Add HP MSM mibs.
* Schema file got dropped in rebase.
* Add wireless menu to view sensors across all devices.
Icons in the menu need help :/
* Add HeliOS, Mimosa, and Siklu support
Sensors added SNR + Noise
* Add power and utilization to Unifi
* Update polling to prefetch all sensor data in a few snmp requests as possible
* Add Extendair: tx+rx power, aggregate rate, frequency
* Add a check for duplicate sensors in discovery. Just print an error for now.
* Add Bit Error Ratio (named error-ratio to allow for bit error rate to be added if needed)
Fix an incorrect link in the wireless sensors table
* Add error rate and change all bps and Hz to use si units
* Fixes to limits and frequency display
* Fix overview graph frequency display
A few decimal place tweaks
* Don't allow switching sensor and wireless-sensor graphs, it doesn't work.
Change individual distance graphs to use si units
* Go through the OS and make sure I got all the sensors I can (probably missed some still)
Because pollWirelessChannelAsFrequency() is generic and a little complex, so pull it up to OS.
Message to help developers adding supports that don't return an array from discover functions.
* Fix some issues
* Remove noise and signal for now at least
A couple more fixes
Add a notification
* Oopsie
* Bonus AirFiber sensors
2017-05-01 23:49:11 -05:00
|
|
|
</td>
|
|
|
|
<td>
|
|
|
|
<a type="button" class="btn btn-danger btn-sm '.$custom.' remove-custom" id="remove-custom" name="remove-custom" data-sensor_id="'.$sensor['sensor_id'].'">Clear custom</a>
|
|
|
|
</td>
|
|
|
|
</tr>
|
|
|
|
';
|
|
|
|
}
|
|
|
|
?>
|
|
|
|
</table>
|
|
|
|
</form>
|
|
|
|
<form id="alert-reset">
|
|
|
|
<?php
|
|
|
|
foreach ($rollback as $reset_data) {
|
|
|
|
echo '
|
|
|
|
<input type="hidden" name="sensor_id[]" value="'.$reset_data['sensor_id'].'">
|
|
|
|
<input type="hidden" name="sensor_limit[]" value="'.$reset_data['sensor_limit'].'">
|
2018-09-16 19:23:12 +02:00
|
|
|
<input type="hidden" name="sensor_limit_warn[]" value="'.$reset_data['sensor_limit_warn'].'">
|
|
|
|
<input type="hidden" name="sensor_limit_low_warn[]" value="'.$reset_data['sensor_limit_low_warn'].'">
|
feature: Wireless Sensors Overhaul (#6471)
* feature: Wireless Sensors
Includes client counts for ios and unifi
Graphing could use some improvement.
Alerting and threshold ui not implemented
WIP: starting OO based wireless sensors.
Class based functionality working
remove old functional files
add schema file
discovery needs to be enabled, not polling
fix up schema
fix Unifi discovery not returning an array
Add some debug when discovering a sensor.
Fix style.
Add missing semicolin
Add a null object (Generic) for OS.
Fill out some phpdocs
Re-organized code
Each sensor type now has it's own discovery and polling interface
Custom polling tested with Unifi CCQ
Left to do:
Implement UI (Graphs and Custom thresholds)
Alerting
Testing
Fix event message text
Remove runDiscovery and runPolling from OS, they are unused and don't belong there.
Cleanups/docs
Missed this file.
Remove the requirement to fetch the current value to check validity.
Do that automatically if current is not specified
A few cleanups here and there
First pass at graphing.
device_ and wireless_ graphs added.
Add RouterOS support
Singleton OS instance isn't required right now.
Remove that to allow some memory to be freed.
Add wireless to the device list metrics.
Make all metrics clickable
Tweak graphs a bit
Implement limit configuration page.
Use sensors page as common code instead of duplicating.
Clean up some javascript interactions: Allow enter on values to save. Cancel if update is not needed. Enable the clear custom button after setting a custom value.
Add some wireless alert rules to the library.
Add documentation.
Add unifi client counts by ssid in addition to radio.
Optimize Sensor polling a bit.
Add HP MSM clients support (for full controller)
Fix function accessibility
Formalize the discovery and poller interfaces.
Add Xirrus clients and noise floor
move module interfaces to a more appropriate place.
push caching code up to os, unsure about this do to the limitations
No point in selectively enabling wireless discovery. We only discover if the device supports something.
Add RSSI, Power, and Rate.
Add these sensors for Ubnt Airos.
Clean up some copyrights.
Reduce the amount of files need to add new types.
Leave graph files for consistency and to allow customization.
Remove the old wifi clients graph completely.
ciscowlc should have improved counts (total and per-ssid)
Schema didn't get added.
Impelement the rest of the AirOS sensors
Reformat and re-organize the Airos.php class.
Add several UBNT AirFiber sensors
A few fixes add links to the section headers
Add HP MSM mibs.
* Schema file got dropped in rebase.
* Add wireless menu to view sensors across all devices.
Icons in the menu need help :/
* Add HeliOS, Mimosa, and Siklu support
Sensors added SNR + Noise
* Add power and utilization to Unifi
* Update polling to prefetch all sensor data in a few snmp requests as possible
* Add Extendair: tx+rx power, aggregate rate, frequency
* Add a check for duplicate sensors in discovery. Just print an error for now.
* Add Bit Error Ratio (named error-ratio to allow for bit error rate to be added if needed)
Fix an incorrect link in the wireless sensors table
* Add error rate and change all bps and Hz to use si units
* Fixes to limits and frequency display
* Fix overview graph frequency display
A few decimal place tweaks
* Don't allow switching sensor and wireless-sensor graphs, it doesn't work.
Change individual distance graphs to use si units
* Go through the OS and make sure I got all the sensors I can (probably missed some still)
Because pollWirelessChannelAsFrequency() is generic and a little complex, so pull it up to OS.
Message to help developers adding supports that don't return an array from discover functions.
* Fix some issues
* Remove noise and signal for now at least
A couple more fixes
Add a notification
* Oopsie
* Bonus AirFiber sensors
2017-05-01 23:49:11 -05:00
|
|
|
<input type="hidden" name="sensor_limit_low[]" value="'.$reset_data['sensor_limit_low'].'">
|
|
|
|
<input type="hidden" name="sensor_alert[]" value="'.$reset_data['sensor_alert'].'">
|
|
|
|
';
|
|
|
|
}
|
|
|
|
?>
|
|
|
|
<input type="hidden" name="type" value="sensor-alert-reset">
|
|
|
|
<button id = "newThread" class="btn btn-primary btn-sm" type="submit">Reset values</button>
|
|
|
|
</form>
|
|
|
|
<script>
|
|
|
|
$('#newThread').on('click', function(e){
|
|
|
|
e.preventDefault(); // preventing default click action
|
2018-09-16 19:23:12 +02:00
|
|
|
|
feature: Wireless Sensors Overhaul (#6471)
* feature: Wireless Sensors
Includes client counts for ios and unifi
Graphing could use some improvement.
Alerting and threshold ui not implemented
WIP: starting OO based wireless sensors.
Class based functionality working
remove old functional files
add schema file
discovery needs to be enabled, not polling
fix up schema
fix Unifi discovery not returning an array
Add some debug when discovering a sensor.
Fix style.
Add missing semicolin
Add a null object (Generic) for OS.
Fill out some phpdocs
Re-organized code
Each sensor type now has it's own discovery and polling interface
Custom polling tested with Unifi CCQ
Left to do:
Implement UI (Graphs and Custom thresholds)
Alerting
Testing
Fix event message text
Remove runDiscovery and runPolling from OS, they are unused and don't belong there.
Cleanups/docs
Missed this file.
Remove the requirement to fetch the current value to check validity.
Do that automatically if current is not specified
A few cleanups here and there
First pass at graphing.
device_ and wireless_ graphs added.
Add RouterOS support
Singleton OS instance isn't required right now.
Remove that to allow some memory to be freed.
Add wireless to the device list metrics.
Make all metrics clickable
Tweak graphs a bit
Implement limit configuration page.
Use sensors page as common code instead of duplicating.
Clean up some javascript interactions: Allow enter on values to save. Cancel if update is not needed. Enable the clear custom button after setting a custom value.
Add some wireless alert rules to the library.
Add documentation.
Add unifi client counts by ssid in addition to radio.
Optimize Sensor polling a bit.
Add HP MSM clients support (for full controller)
Fix function accessibility
Formalize the discovery and poller interfaces.
Add Xirrus clients and noise floor
move module interfaces to a more appropriate place.
push caching code up to os, unsure about this do to the limitations
No point in selectively enabling wireless discovery. We only discover if the device supports something.
Add RSSI, Power, and Rate.
Add these sensors for Ubnt Airos.
Clean up some copyrights.
Reduce the amount of files need to add new types.
Leave graph files for consistency and to allow customization.
Remove the old wifi clients graph completely.
ciscowlc should have improved counts (total and per-ssid)
Schema didn't get added.
Impelement the rest of the AirOS sensors
Reformat and re-organize the Airos.php class.
Add several UBNT AirFiber sensors
A few fixes add links to the section headers
Add HP MSM mibs.
* Schema file got dropped in rebase.
* Add wireless menu to view sensors across all devices.
Icons in the menu need help :/
* Add HeliOS, Mimosa, and Siklu support
Sensors added SNR + Noise
* Add power and utilization to Unifi
* Update polling to prefetch all sensor data in a few snmp requests as possible
* Add Extendair: tx+rx power, aggregate rate, frequency
* Add a check for duplicate sensors in discovery. Just print an error for now.
* Add Bit Error Ratio (named error-ratio to allow for bit error rate to be added if needed)
Fix an incorrect link in the wireless sensors table
* Add error rate and change all bps and Hz to use si units
* Fixes to limits and frequency display
* Fix overview graph frequency display
A few decimal place tweaks
* Don't allow switching sensor and wireless-sensor graphs, it doesn't work.
Change individual distance graphs to use si units
* Go through the OS and make sure I got all the sensors I can (probably missed some still)
Because pollWirelessChannelAsFrequency() is generic and a little complex, so pull it up to OS.
Message to help developers adding supports that don't return an array from discover functions.
* Fix some issues
* Remove noise and signal for now at least
A couple more fixes
Add a notification
* Oopsie
* Bonus AirFiber sensors
2017-05-01 23:49:11 -05:00
|
|
|
var form = $('#alert-reset');
|
2018-09-16 19:23:12 +02:00
|
|
|
|
feature: Wireless Sensors Overhaul (#6471)
* feature: Wireless Sensors
Includes client counts for ios and unifi
Graphing could use some improvement.
Alerting and threshold ui not implemented
WIP: starting OO based wireless sensors.
Class based functionality working
remove old functional files
add schema file
discovery needs to be enabled, not polling
fix up schema
fix Unifi discovery not returning an array
Add some debug when discovering a sensor.
Fix style.
Add missing semicolin
Add a null object (Generic) for OS.
Fill out some phpdocs
Re-organized code
Each sensor type now has it's own discovery and polling interface
Custom polling tested with Unifi CCQ
Left to do:
Implement UI (Graphs and Custom thresholds)
Alerting
Testing
Fix event message text
Remove runDiscovery and runPolling from OS, they are unused and don't belong there.
Cleanups/docs
Missed this file.
Remove the requirement to fetch the current value to check validity.
Do that automatically if current is not specified
A few cleanups here and there
First pass at graphing.
device_ and wireless_ graphs added.
Add RouterOS support
Singleton OS instance isn't required right now.
Remove that to allow some memory to be freed.
Add wireless to the device list metrics.
Make all metrics clickable
Tweak graphs a bit
Implement limit configuration page.
Use sensors page as common code instead of duplicating.
Clean up some javascript interactions: Allow enter on values to save. Cancel if update is not needed. Enable the clear custom button after setting a custom value.
Add some wireless alert rules to the library.
Add documentation.
Add unifi client counts by ssid in addition to radio.
Optimize Sensor polling a bit.
Add HP MSM clients support (for full controller)
Fix function accessibility
Formalize the discovery and poller interfaces.
Add Xirrus clients and noise floor
move module interfaces to a more appropriate place.
push caching code up to os, unsure about this do to the limitations
No point in selectively enabling wireless discovery. We only discover if the device supports something.
Add RSSI, Power, and Rate.
Add these sensors for Ubnt Airos.
Clean up some copyrights.
Reduce the amount of files need to add new types.
Leave graph files for consistency and to allow customization.
Remove the old wifi clients graph completely.
ciscowlc should have improved counts (total and per-ssid)
Schema didn't get added.
Impelement the rest of the AirOS sensors
Reformat and re-organize the Airos.php class.
Add several UBNT AirFiber sensors
A few fixes add links to the section headers
Add HP MSM mibs.
* Schema file got dropped in rebase.
* Add wireless menu to view sensors across all devices.
Icons in the menu need help :/
* Add HeliOS, Mimosa, and Siklu support
Sensors added SNR + Noise
* Add power and utilization to Unifi
* Update polling to prefetch all sensor data in a few snmp requests as possible
* Add Extendair: tx+rx power, aggregate rate, frequency
* Add a check for duplicate sensors in discovery. Just print an error for now.
* Add Bit Error Ratio (named error-ratio to allow for bit error rate to be added if needed)
Fix an incorrect link in the wireless sensors table
* Add error rate and change all bps and Hz to use si units
* Fixes to limits and frequency display
* Fix overview graph frequency display
A few decimal place tweaks
* Don't allow switching sensor and wireless-sensor graphs, it doesn't work.
Change individual distance graphs to use si units
* Go through the OS and make sure I got all the sensors I can (probably missed some still)
Because pollWirelessChannelAsFrequency() is generic and a little complex, so pull it up to OS.
Message to help developers adding supports that don't return an array from discover functions.
* Fix some issues
* Remove noise and signal for now at least
A couple more fixes
Add a notification
* Oopsie
* Bonus AirFiber sensors
2017-05-01 23:49:11 -05:00
|
|
|
$.ajax({
|
|
|
|
type: 'POST',
|
|
|
|
url: 'ajax_form.php',
|
|
|
|
data: form.serialize(),
|
2018-09-16 19:23:12 +02:00
|
|
|
dataType: "json",
|
feature: Wireless Sensors Overhaul (#6471)
* feature: Wireless Sensors
Includes client counts for ios and unifi
Graphing could use some improvement.
Alerting and threshold ui not implemented
WIP: starting OO based wireless sensors.
Class based functionality working
remove old functional files
add schema file
discovery needs to be enabled, not polling
fix up schema
fix Unifi discovery not returning an array
Add some debug when discovering a sensor.
Fix style.
Add missing semicolin
Add a null object (Generic) for OS.
Fill out some phpdocs
Re-organized code
Each sensor type now has it's own discovery and polling interface
Custom polling tested with Unifi CCQ
Left to do:
Implement UI (Graphs and Custom thresholds)
Alerting
Testing
Fix event message text
Remove runDiscovery and runPolling from OS, they are unused and don't belong there.
Cleanups/docs
Missed this file.
Remove the requirement to fetch the current value to check validity.
Do that automatically if current is not specified
A few cleanups here and there
First pass at graphing.
device_ and wireless_ graphs added.
Add RouterOS support
Singleton OS instance isn't required right now.
Remove that to allow some memory to be freed.
Add wireless to the device list metrics.
Make all metrics clickable
Tweak graphs a bit
Implement limit configuration page.
Use sensors page as common code instead of duplicating.
Clean up some javascript interactions: Allow enter on values to save. Cancel if update is not needed. Enable the clear custom button after setting a custom value.
Add some wireless alert rules to the library.
Add documentation.
Add unifi client counts by ssid in addition to radio.
Optimize Sensor polling a bit.
Add HP MSM clients support (for full controller)
Fix function accessibility
Formalize the discovery and poller interfaces.
Add Xirrus clients and noise floor
move module interfaces to a more appropriate place.
push caching code up to os, unsure about this do to the limitations
No point in selectively enabling wireless discovery. We only discover if the device supports something.
Add RSSI, Power, and Rate.
Add these sensors for Ubnt Airos.
Clean up some copyrights.
Reduce the amount of files need to add new types.
Leave graph files for consistency and to allow customization.
Remove the old wifi clients graph completely.
ciscowlc should have improved counts (total and per-ssid)
Schema didn't get added.
Impelement the rest of the AirOS sensors
Reformat and re-organize the Airos.php class.
Add several UBNT AirFiber sensors
A few fixes add links to the section headers
Add HP MSM mibs.
* Schema file got dropped in rebase.
* Add wireless menu to view sensors across all devices.
Icons in the menu need help :/
* Add HeliOS, Mimosa, and Siklu support
Sensors added SNR + Noise
* Add power and utilization to Unifi
* Update polling to prefetch all sensor data in a few snmp requests as possible
* Add Extendair: tx+rx power, aggregate rate, frequency
* Add a check for duplicate sensors in discovery. Just print an error for now.
* Add Bit Error Ratio (named error-ratio to allow for bit error rate to be added if needed)
Fix an incorrect link in the wireless sensors table
* Add error rate and change all bps and Hz to use si units
* Fixes to limits and frequency display
* Fix overview graph frequency display
A few decimal place tweaks
* Don't allow switching sensor and wireless-sensor graphs, it doesn't work.
Change individual distance graphs to use si units
* Go through the OS and make sure I got all the sensors I can (probably missed some still)
Because pollWirelessChannelAsFrequency() is generic and a little complex, so pull it up to OS.
Message to help developers adding supports that don't return an array from discover functions.
* Fix some issues
* Remove noise and signal for now at least
A couple more fixes
Add a notification
* Oopsie
* Bonus AirFiber sensors
2017-05-01 23:49:11 -05:00
|
|
|
success: function(data){
|
2018-09-16 19:23:12 +02:00
|
|
|
if (data.status == 'ok') {
|
|
|
|
toastr.success(data.message);
|
|
|
|
setTimeout(function() {
|
|
|
|
location.reload(true);
|
|
|
|
}, 2000);
|
|
|
|
} else {
|
|
|
|
toastr.error(data.message);
|
|
|
|
}
|
|
|
|
|
feature: Wireless Sensors Overhaul (#6471)
* feature: Wireless Sensors
Includes client counts for ios and unifi
Graphing could use some improvement.
Alerting and threshold ui not implemented
WIP: starting OO based wireless sensors.
Class based functionality working
remove old functional files
add schema file
discovery needs to be enabled, not polling
fix up schema
fix Unifi discovery not returning an array
Add some debug when discovering a sensor.
Fix style.
Add missing semicolin
Add a null object (Generic) for OS.
Fill out some phpdocs
Re-organized code
Each sensor type now has it's own discovery and polling interface
Custom polling tested with Unifi CCQ
Left to do:
Implement UI (Graphs and Custom thresholds)
Alerting
Testing
Fix event message text
Remove runDiscovery and runPolling from OS, they are unused and don't belong there.
Cleanups/docs
Missed this file.
Remove the requirement to fetch the current value to check validity.
Do that automatically if current is not specified
A few cleanups here and there
First pass at graphing.
device_ and wireless_ graphs added.
Add RouterOS support
Singleton OS instance isn't required right now.
Remove that to allow some memory to be freed.
Add wireless to the device list metrics.
Make all metrics clickable
Tweak graphs a bit
Implement limit configuration page.
Use sensors page as common code instead of duplicating.
Clean up some javascript interactions: Allow enter on values to save. Cancel if update is not needed. Enable the clear custom button after setting a custom value.
Add some wireless alert rules to the library.
Add documentation.
Add unifi client counts by ssid in addition to radio.
Optimize Sensor polling a bit.
Add HP MSM clients support (for full controller)
Fix function accessibility
Formalize the discovery and poller interfaces.
Add Xirrus clients and noise floor
move module interfaces to a more appropriate place.
push caching code up to os, unsure about this do to the limitations
No point in selectively enabling wireless discovery. We only discover if the device supports something.
Add RSSI, Power, and Rate.
Add these sensors for Ubnt Airos.
Clean up some copyrights.
Reduce the amount of files need to add new types.
Leave graph files for consistency and to allow customization.
Remove the old wifi clients graph completely.
ciscowlc should have improved counts (total and per-ssid)
Schema didn't get added.
Impelement the rest of the AirOS sensors
Reformat and re-organize the Airos.php class.
Add several UBNT AirFiber sensors
A few fixes add links to the section headers
Add HP MSM mibs.
* Schema file got dropped in rebase.
* Add wireless menu to view sensors across all devices.
Icons in the menu need help :/
* Add HeliOS, Mimosa, and Siklu support
Sensors added SNR + Noise
* Add power and utilization to Unifi
* Update polling to prefetch all sensor data in a few snmp requests as possible
* Add Extendair: tx+rx power, aggregate rate, frequency
* Add a check for duplicate sensors in discovery. Just print an error for now.
* Add Bit Error Ratio (named error-ratio to allow for bit error rate to be added if needed)
Fix an incorrect link in the wireless sensors table
* Add error rate and change all bps and Hz to use si units
* Fixes to limits and frequency display
* Fix overview graph frequency display
A few decimal place tweaks
* Don't allow switching sensor and wireless-sensor graphs, it doesn't work.
Change individual distance graphs to use si units
* Go through the OS and make sure I got all the sensors I can (probably missed some still)
Because pollWirelessChannelAsFrequency() is generic and a little complex, so pull it up to OS.
Message to help developers adding supports that don't return an array from discover functions.
* Fix some issues
* Remove noise and signal for now at least
A couple more fixes
Add a notification
* Oopsie
* Bonus AirFiber sensors
2017-05-01 23:49:11 -05:00
|
|
|
},
|
2019-01-09 19:40:27 -06:00
|
|
|
error:function(data){
|
2018-09-16 19:23:12 +02:00
|
|
|
toastr.error(data.message);
|
feature: Wireless Sensors Overhaul (#6471)
* feature: Wireless Sensors
Includes client counts for ios and unifi
Graphing could use some improvement.
Alerting and threshold ui not implemented
WIP: starting OO based wireless sensors.
Class based functionality working
remove old functional files
add schema file
discovery needs to be enabled, not polling
fix up schema
fix Unifi discovery not returning an array
Add some debug when discovering a sensor.
Fix style.
Add missing semicolin
Add a null object (Generic) for OS.
Fill out some phpdocs
Re-organized code
Each sensor type now has it's own discovery and polling interface
Custom polling tested with Unifi CCQ
Left to do:
Implement UI (Graphs and Custom thresholds)
Alerting
Testing
Fix event message text
Remove runDiscovery and runPolling from OS, they are unused and don't belong there.
Cleanups/docs
Missed this file.
Remove the requirement to fetch the current value to check validity.
Do that automatically if current is not specified
A few cleanups here and there
First pass at graphing.
device_ and wireless_ graphs added.
Add RouterOS support
Singleton OS instance isn't required right now.
Remove that to allow some memory to be freed.
Add wireless to the device list metrics.
Make all metrics clickable
Tweak graphs a bit
Implement limit configuration page.
Use sensors page as common code instead of duplicating.
Clean up some javascript interactions: Allow enter on values to save. Cancel if update is not needed. Enable the clear custom button after setting a custom value.
Add some wireless alert rules to the library.
Add documentation.
Add unifi client counts by ssid in addition to radio.
Optimize Sensor polling a bit.
Add HP MSM clients support (for full controller)
Fix function accessibility
Formalize the discovery and poller interfaces.
Add Xirrus clients and noise floor
move module interfaces to a more appropriate place.
push caching code up to os, unsure about this do to the limitations
No point in selectively enabling wireless discovery. We only discover if the device supports something.
Add RSSI, Power, and Rate.
Add these sensors for Ubnt Airos.
Clean up some copyrights.
Reduce the amount of files need to add new types.
Leave graph files for consistency and to allow customization.
Remove the old wifi clients graph completely.
ciscowlc should have improved counts (total and per-ssid)
Schema didn't get added.
Impelement the rest of the AirOS sensors
Reformat and re-organize the Airos.php class.
Add several UBNT AirFiber sensors
A few fixes add links to the section headers
Add HP MSM mibs.
* Schema file got dropped in rebase.
* Add wireless menu to view sensors across all devices.
Icons in the menu need help :/
* Add HeliOS, Mimosa, and Siklu support
Sensors added SNR + Noise
* Add power and utilization to Unifi
* Update polling to prefetch all sensor data in a few snmp requests as possible
* Add Extendair: tx+rx power, aggregate rate, frequency
* Add a check for duplicate sensors in discovery. Just print an error for now.
* Add Bit Error Ratio (named error-ratio to allow for bit error rate to be added if needed)
Fix an incorrect link in the wireless sensors table
* Add error rate and change all bps and Hz to use si units
* Fixes to limits and frequency display
* Fix overview graph frequency display
A few decimal place tweaks
* Don't allow switching sensor and wireless-sensor graphs, it doesn't work.
Change individual distance graphs to use si units
* Go through the OS and make sure I got all the sensors I can (probably missed some still)
Because pollWirelessChannelAsFrequency() is generic and a little complex, so pull it up to OS.
Message to help developers adding supports that don't return an array from discover functions.
* Fix some issues
* Remove noise and signal for now at least
A couple more fixes
Add a notification
* Oopsie
* Bonus AirFiber sensors
2017-05-01 23:49:11 -05:00
|
|
|
}
|
|
|
|
});
|
|
|
|
});
|
|
|
|
</script>
|
|
|
|
<script>
|
|
|
|
|
|
|
|
$('.sensor').on('focusin', function(){
|
|
|
|
console.log("Saving value " + $(this).val());
|
|
|
|
$(this).data('val', $(this).val());
|
|
|
|
});
|
|
|
|
|
|
|
|
$( ".sensor" ).bind('blur keyup',function(e) {
|
|
|
|
if (e.type === 'keyup' && e.keyCode !== 13) return;
|
|
|
|
var prev = $(this).data('val');
|
|
|
|
var data = $(this).val();
|
|
|
|
if(prev === data) return;
|
|
|
|
|
|
|
|
var sensor_type = $(this).attr('id');
|
|
|
|
var device_id = $(this).data("device_id");
|
|
|
|
var sensor_id = $(this).data("sensor_id");
|
|
|
|
var value_type = $(this).data("value_type");
|
|
|
|
var $this = $(this);
|
|
|
|
$.ajax({
|
|
|
|
type: 'POST',
|
|
|
|
url: 'ajax_form.php',
|
|
|
|
data: { type: "<?php echo $ajax_prefix; ?>-update", device_id: device_id, data: data, sensor_id: sensor_id , value_type: value_type},
|
2018-09-16 19:23:12 +02:00
|
|
|
dataType: "json",
|
feature: Wireless Sensors Overhaul (#6471)
* feature: Wireless Sensors
Includes client counts for ios and unifi
Graphing could use some improvement.
Alerting and threshold ui not implemented
WIP: starting OO based wireless sensors.
Class based functionality working
remove old functional files
add schema file
discovery needs to be enabled, not polling
fix up schema
fix Unifi discovery not returning an array
Add some debug when discovering a sensor.
Fix style.
Add missing semicolin
Add a null object (Generic) for OS.
Fill out some phpdocs
Re-organized code
Each sensor type now has it's own discovery and polling interface
Custom polling tested with Unifi CCQ
Left to do:
Implement UI (Graphs and Custom thresholds)
Alerting
Testing
Fix event message text
Remove runDiscovery and runPolling from OS, they are unused and don't belong there.
Cleanups/docs
Missed this file.
Remove the requirement to fetch the current value to check validity.
Do that automatically if current is not specified
A few cleanups here and there
First pass at graphing.
device_ and wireless_ graphs added.
Add RouterOS support
Singleton OS instance isn't required right now.
Remove that to allow some memory to be freed.
Add wireless to the device list metrics.
Make all metrics clickable
Tweak graphs a bit
Implement limit configuration page.
Use sensors page as common code instead of duplicating.
Clean up some javascript interactions: Allow enter on values to save. Cancel if update is not needed. Enable the clear custom button after setting a custom value.
Add some wireless alert rules to the library.
Add documentation.
Add unifi client counts by ssid in addition to radio.
Optimize Sensor polling a bit.
Add HP MSM clients support (for full controller)
Fix function accessibility
Formalize the discovery and poller interfaces.
Add Xirrus clients and noise floor
move module interfaces to a more appropriate place.
push caching code up to os, unsure about this do to the limitations
No point in selectively enabling wireless discovery. We only discover if the device supports something.
Add RSSI, Power, and Rate.
Add these sensors for Ubnt Airos.
Clean up some copyrights.
Reduce the amount of files need to add new types.
Leave graph files for consistency and to allow customization.
Remove the old wifi clients graph completely.
ciscowlc should have improved counts (total and per-ssid)
Schema didn't get added.
Impelement the rest of the AirOS sensors
Reformat and re-organize the Airos.php class.
Add several UBNT AirFiber sensors
A few fixes add links to the section headers
Add HP MSM mibs.
* Schema file got dropped in rebase.
* Add wireless menu to view sensors across all devices.
Icons in the menu need help :/
* Add HeliOS, Mimosa, and Siklu support
Sensors added SNR + Noise
* Add power and utilization to Unifi
* Update polling to prefetch all sensor data in a few snmp requests as possible
* Add Extendair: tx+rx power, aggregate rate, frequency
* Add a check for duplicate sensors in discovery. Just print an error for now.
* Add Bit Error Ratio (named error-ratio to allow for bit error rate to be added if needed)
Fix an incorrect link in the wireless sensors table
* Add error rate and change all bps and Hz to use si units
* Fixes to limits and frequency display
* Fix overview graph frequency display
A few decimal place tweaks
* Don't allow switching sensor and wireless-sensor graphs, it doesn't work.
Change individual distance graphs to use si units
* Go through the OS and make sure I got all the sensors I can (probably missed some still)
Because pollWirelessChannelAsFrequency() is generic and a little complex, so pull it up to OS.
Message to help developers adding supports that don't return an array from discover functions.
* Fix some issues
* Remove noise and signal for now at least
A couple more fixes
Add a notification
* Oopsie
* Bonus AirFiber sensors
2017-05-01 23:49:11 -05:00
|
|
|
success: function(data){
|
2018-09-16 19:23:12 +02:00
|
|
|
if (data.status == 'ok') {
|
feature: Wireless Sensors Overhaul (#6471)
* feature: Wireless Sensors
Includes client counts for ios and unifi
Graphing could use some improvement.
Alerting and threshold ui not implemented
WIP: starting OO based wireless sensors.
Class based functionality working
remove old functional files
add schema file
discovery needs to be enabled, not polling
fix up schema
fix Unifi discovery not returning an array
Add some debug when discovering a sensor.
Fix style.
Add missing semicolin
Add a null object (Generic) for OS.
Fill out some phpdocs
Re-organized code
Each sensor type now has it's own discovery and polling interface
Custom polling tested with Unifi CCQ
Left to do:
Implement UI (Graphs and Custom thresholds)
Alerting
Testing
Fix event message text
Remove runDiscovery and runPolling from OS, they are unused and don't belong there.
Cleanups/docs
Missed this file.
Remove the requirement to fetch the current value to check validity.
Do that automatically if current is not specified
A few cleanups here and there
First pass at graphing.
device_ and wireless_ graphs added.
Add RouterOS support
Singleton OS instance isn't required right now.
Remove that to allow some memory to be freed.
Add wireless to the device list metrics.
Make all metrics clickable
Tweak graphs a bit
Implement limit configuration page.
Use sensors page as common code instead of duplicating.
Clean up some javascript interactions: Allow enter on values to save. Cancel if update is not needed. Enable the clear custom button after setting a custom value.
Add some wireless alert rules to the library.
Add documentation.
Add unifi client counts by ssid in addition to radio.
Optimize Sensor polling a bit.
Add HP MSM clients support (for full controller)
Fix function accessibility
Formalize the discovery and poller interfaces.
Add Xirrus clients and noise floor
move module interfaces to a more appropriate place.
push caching code up to os, unsure about this do to the limitations
No point in selectively enabling wireless discovery. We only discover if the device supports something.
Add RSSI, Power, and Rate.
Add these sensors for Ubnt Airos.
Clean up some copyrights.
Reduce the amount of files need to add new types.
Leave graph files for consistency and to allow customization.
Remove the old wifi clients graph completely.
ciscowlc should have improved counts (total and per-ssid)
Schema didn't get added.
Impelement the rest of the AirOS sensors
Reformat and re-organize the Airos.php class.
Add several UBNT AirFiber sensors
A few fixes add links to the section headers
Add HP MSM mibs.
* Schema file got dropped in rebase.
* Add wireless menu to view sensors across all devices.
Icons in the menu need help :/
* Add HeliOS, Mimosa, and Siklu support
Sensors added SNR + Noise
* Add power and utilization to Unifi
* Update polling to prefetch all sensor data in a few snmp requests as possible
* Add Extendair: tx+rx power, aggregate rate, frequency
* Add a check for duplicate sensors in discovery. Just print an error for now.
* Add Bit Error Ratio (named error-ratio to allow for bit error rate to be added if needed)
Fix an incorrect link in the wireless sensors table
* Add error rate and change all bps and Hz to use si units
* Fixes to limits and frequency display
* Fix overview graph frequency display
A few decimal place tweaks
* Don't allow switching sensor and wireless-sensor graphs, it doesn't work.
Change individual distance graphs to use si units
* Go through the OS and make sure I got all the sensors I can (probably missed some still)
Because pollWirelessChannelAsFrequency() is generic and a little complex, so pull it up to OS.
Message to help developers adding supports that don't return an array from discover functions.
* Fix some issues
* Remove noise and signal for now at least
A couple more fixes
Add a notification
* Oopsie
* Bonus AirFiber sensors
2017-05-01 23:49:11 -05:00
|
|
|
$('.remove-custom[data-sensor_id='+sensor_id+']').removeClass('disabled');
|
2018-09-16 19:23:12 +02:00
|
|
|
toastr.success(data.message);
|
|
|
|
} else {
|
|
|
|
toastr.error(data.message);
|
|
|
|
}
|
|
|
|
|
feature: Wireless Sensors Overhaul (#6471)
* feature: Wireless Sensors
Includes client counts for ios and unifi
Graphing could use some improvement.
Alerting and threshold ui not implemented
WIP: starting OO based wireless sensors.
Class based functionality working
remove old functional files
add schema file
discovery needs to be enabled, not polling
fix up schema
fix Unifi discovery not returning an array
Add some debug when discovering a sensor.
Fix style.
Add missing semicolin
Add a null object (Generic) for OS.
Fill out some phpdocs
Re-organized code
Each sensor type now has it's own discovery and polling interface
Custom polling tested with Unifi CCQ
Left to do:
Implement UI (Graphs and Custom thresholds)
Alerting
Testing
Fix event message text
Remove runDiscovery and runPolling from OS, they are unused and don't belong there.
Cleanups/docs
Missed this file.
Remove the requirement to fetch the current value to check validity.
Do that automatically if current is not specified
A few cleanups here and there
First pass at graphing.
device_ and wireless_ graphs added.
Add RouterOS support
Singleton OS instance isn't required right now.
Remove that to allow some memory to be freed.
Add wireless to the device list metrics.
Make all metrics clickable
Tweak graphs a bit
Implement limit configuration page.
Use sensors page as common code instead of duplicating.
Clean up some javascript interactions: Allow enter on values to save. Cancel if update is not needed. Enable the clear custom button after setting a custom value.
Add some wireless alert rules to the library.
Add documentation.
Add unifi client counts by ssid in addition to radio.
Optimize Sensor polling a bit.
Add HP MSM clients support (for full controller)
Fix function accessibility
Formalize the discovery and poller interfaces.
Add Xirrus clients and noise floor
move module interfaces to a more appropriate place.
push caching code up to os, unsure about this do to the limitations
No point in selectively enabling wireless discovery. We only discover if the device supports something.
Add RSSI, Power, and Rate.
Add these sensors for Ubnt Airos.
Clean up some copyrights.
Reduce the amount of files need to add new types.
Leave graph files for consistency and to allow customization.
Remove the old wifi clients graph completely.
ciscowlc should have improved counts (total and per-ssid)
Schema didn't get added.
Impelement the rest of the AirOS sensors
Reformat and re-organize the Airos.php class.
Add several UBNT AirFiber sensors
A few fixes add links to the section headers
Add HP MSM mibs.
* Schema file got dropped in rebase.
* Add wireless menu to view sensors across all devices.
Icons in the menu need help :/
* Add HeliOS, Mimosa, and Siklu support
Sensors added SNR + Noise
* Add power and utilization to Unifi
* Update polling to prefetch all sensor data in a few snmp requests as possible
* Add Extendair: tx+rx power, aggregate rate, frequency
* Add a check for duplicate sensors in discovery. Just print an error for now.
* Add Bit Error Ratio (named error-ratio to allow for bit error rate to be added if needed)
Fix an incorrect link in the wireless sensors table
* Add error rate and change all bps and Hz to use si units
* Fixes to limits and frequency display
* Fix overview graph frequency display
A few decimal place tweaks
* Don't allow switching sensor and wireless-sensor graphs, it doesn't work.
Change individual distance graphs to use si units
* Go through the OS and make sure I got all the sensors I can (probably missed some still)
Because pollWirelessChannelAsFrequency() is generic and a little complex, so pull it up to OS.
Message to help developers adding supports that don't return an array from discover functions.
* Fix some issues
* Remove noise and signal for now at least
A couple more fixes
Add a notification
* Oopsie
* Bonus AirFiber sensors
2017-05-01 23:49:11 -05:00
|
|
|
},
|
2019-01-09 19:40:27 -06:00
|
|
|
error:function(data){
|
2018-09-16 19:23:12 +02:00
|
|
|
toastr.error(data.message);
|
|
|
|
}
|
feature: Wireless Sensors Overhaul (#6471)
* feature: Wireless Sensors
Includes client counts for ios and unifi
Graphing could use some improvement.
Alerting and threshold ui not implemented
WIP: starting OO based wireless sensors.
Class based functionality working
remove old functional files
add schema file
discovery needs to be enabled, not polling
fix up schema
fix Unifi discovery not returning an array
Add some debug when discovering a sensor.
Fix style.
Add missing semicolin
Add a null object (Generic) for OS.
Fill out some phpdocs
Re-organized code
Each sensor type now has it's own discovery and polling interface
Custom polling tested with Unifi CCQ
Left to do:
Implement UI (Graphs and Custom thresholds)
Alerting
Testing
Fix event message text
Remove runDiscovery and runPolling from OS, they are unused and don't belong there.
Cleanups/docs
Missed this file.
Remove the requirement to fetch the current value to check validity.
Do that automatically if current is not specified
A few cleanups here and there
First pass at graphing.
device_ and wireless_ graphs added.
Add RouterOS support
Singleton OS instance isn't required right now.
Remove that to allow some memory to be freed.
Add wireless to the device list metrics.
Make all metrics clickable
Tweak graphs a bit
Implement limit configuration page.
Use sensors page as common code instead of duplicating.
Clean up some javascript interactions: Allow enter on values to save. Cancel if update is not needed. Enable the clear custom button after setting a custom value.
Add some wireless alert rules to the library.
Add documentation.
Add unifi client counts by ssid in addition to radio.
Optimize Sensor polling a bit.
Add HP MSM clients support (for full controller)
Fix function accessibility
Formalize the discovery and poller interfaces.
Add Xirrus clients and noise floor
move module interfaces to a more appropriate place.
push caching code up to os, unsure about this do to the limitations
No point in selectively enabling wireless discovery. We only discover if the device supports something.
Add RSSI, Power, and Rate.
Add these sensors for Ubnt Airos.
Clean up some copyrights.
Reduce the amount of files need to add new types.
Leave graph files for consistency and to allow customization.
Remove the old wifi clients graph completely.
ciscowlc should have improved counts (total and per-ssid)
Schema didn't get added.
Impelement the rest of the AirOS sensors
Reformat and re-organize the Airos.php class.
Add several UBNT AirFiber sensors
A few fixes add links to the section headers
Add HP MSM mibs.
* Schema file got dropped in rebase.
* Add wireless menu to view sensors across all devices.
Icons in the menu need help :/
* Add HeliOS, Mimosa, and Siklu support
Sensors added SNR + Noise
* Add power and utilization to Unifi
* Update polling to prefetch all sensor data in a few snmp requests as possible
* Add Extendair: tx+rx power, aggregate rate, frequency
* Add a check for duplicate sensors in discovery. Just print an error for now.
* Add Bit Error Ratio (named error-ratio to allow for bit error rate to be added if needed)
Fix an incorrect link in the wireless sensors table
* Add error rate and change all bps and Hz to use si units
* Fixes to limits and frequency display
* Fix overview graph frequency display
A few decimal place tweaks
* Don't allow switching sensor and wireless-sensor graphs, it doesn't work.
Change individual distance graphs to use si units
* Go through the OS and make sure I got all the sensors I can (probably missed some still)
Because pollWirelessChannelAsFrequency() is generic and a little complex, so pull it up to OS.
Message to help developers adding supports that don't return an array from discover functions.
* Fix some issues
* Remove noise and signal for now at least
A couple more fixes
Add a notification
* Oopsie
* Bonus AirFiber sensors
2017-05-01 23:49:11 -05:00
|
|
|
});
|
|
|
|
});
|
|
|
|
|
|
|
|
$("[name='alert-status']").bootstrapSwitch('offColor','danger');
|
|
|
|
$('input[name="alert-status"]').on('switchChange.bootstrapSwitch', function(event, state) {
|
|
|
|
event.preventDefault();
|
|
|
|
var $this = $(this);
|
|
|
|
var device_id = $(this).data("device_id");
|
|
|
|
var sensor_id = $(this).data("sensor_id");
|
2018-09-16 19:23:12 +02:00
|
|
|
var sensor_desc = $(this).data("sensor_desc");
|
feature: Wireless Sensors Overhaul (#6471)
* feature: Wireless Sensors
Includes client counts for ios and unifi
Graphing could use some improvement.
Alerting and threshold ui not implemented
WIP: starting OO based wireless sensors.
Class based functionality working
remove old functional files
add schema file
discovery needs to be enabled, not polling
fix up schema
fix Unifi discovery not returning an array
Add some debug when discovering a sensor.
Fix style.
Add missing semicolin
Add a null object (Generic) for OS.
Fill out some phpdocs
Re-organized code
Each sensor type now has it's own discovery and polling interface
Custom polling tested with Unifi CCQ
Left to do:
Implement UI (Graphs and Custom thresholds)
Alerting
Testing
Fix event message text
Remove runDiscovery and runPolling from OS, they are unused and don't belong there.
Cleanups/docs
Missed this file.
Remove the requirement to fetch the current value to check validity.
Do that automatically if current is not specified
A few cleanups here and there
First pass at graphing.
device_ and wireless_ graphs added.
Add RouterOS support
Singleton OS instance isn't required right now.
Remove that to allow some memory to be freed.
Add wireless to the device list metrics.
Make all metrics clickable
Tweak graphs a bit
Implement limit configuration page.
Use sensors page as common code instead of duplicating.
Clean up some javascript interactions: Allow enter on values to save. Cancel if update is not needed. Enable the clear custom button after setting a custom value.
Add some wireless alert rules to the library.
Add documentation.
Add unifi client counts by ssid in addition to radio.
Optimize Sensor polling a bit.
Add HP MSM clients support (for full controller)
Fix function accessibility
Formalize the discovery and poller interfaces.
Add Xirrus clients and noise floor
move module interfaces to a more appropriate place.
push caching code up to os, unsure about this do to the limitations
No point in selectively enabling wireless discovery. We only discover if the device supports something.
Add RSSI, Power, and Rate.
Add these sensors for Ubnt Airos.
Clean up some copyrights.
Reduce the amount of files need to add new types.
Leave graph files for consistency and to allow customization.
Remove the old wifi clients graph completely.
ciscowlc should have improved counts (total and per-ssid)
Schema didn't get added.
Impelement the rest of the AirOS sensors
Reformat and re-organize the Airos.php class.
Add several UBNT AirFiber sensors
A few fixes add links to the section headers
Add HP MSM mibs.
* Schema file got dropped in rebase.
* Add wireless menu to view sensors across all devices.
Icons in the menu need help :/
* Add HeliOS, Mimosa, and Siklu support
Sensors added SNR + Noise
* Add power and utilization to Unifi
* Update polling to prefetch all sensor data in a few snmp requests as possible
* Add Extendair: tx+rx power, aggregate rate, frequency
* Add a check for duplicate sensors in discovery. Just print an error for now.
* Add Bit Error Ratio (named error-ratio to allow for bit error rate to be added if needed)
Fix an incorrect link in the wireless sensors table
* Add error rate and change all bps and Hz to use si units
* Fixes to limits and frequency display
* Fix overview graph frequency display
A few decimal place tweaks
* Don't allow switching sensor and wireless-sensor graphs, it doesn't work.
Change individual distance graphs to use si units
* Go through the OS and make sure I got all the sensors I can (probably missed some still)
Because pollWirelessChannelAsFrequency() is generic and a little complex, so pull it up to OS.
Message to help developers adding supports that don't return an array from discover functions.
* Fix some issues
* Remove noise and signal for now at least
A couple more fixes
Add a notification
* Oopsie
* Bonus AirFiber sensors
2017-05-01 23:49:11 -05:00
|
|
|
$.ajax({
|
|
|
|
type: 'POST',
|
|
|
|
url: 'ajax_form.php',
|
2018-09-16 19:23:12 +02:00
|
|
|
data: { type: "<?php echo $ajax_prefix; ?>-alert-update", device_id: device_id, sensor_id: sensor_id, sensor_desc: sensor_desc, state: state},
|
|
|
|
dataType: "json",
|
feature: Wireless Sensors Overhaul (#6471)
* feature: Wireless Sensors
Includes client counts for ios and unifi
Graphing could use some improvement.
Alerting and threshold ui not implemented
WIP: starting OO based wireless sensors.
Class based functionality working
remove old functional files
add schema file
discovery needs to be enabled, not polling
fix up schema
fix Unifi discovery not returning an array
Add some debug when discovering a sensor.
Fix style.
Add missing semicolin
Add a null object (Generic) for OS.
Fill out some phpdocs
Re-organized code
Each sensor type now has it's own discovery and polling interface
Custom polling tested with Unifi CCQ
Left to do:
Implement UI (Graphs and Custom thresholds)
Alerting
Testing
Fix event message text
Remove runDiscovery and runPolling from OS, they are unused and don't belong there.
Cleanups/docs
Missed this file.
Remove the requirement to fetch the current value to check validity.
Do that automatically if current is not specified
A few cleanups here and there
First pass at graphing.
device_ and wireless_ graphs added.
Add RouterOS support
Singleton OS instance isn't required right now.
Remove that to allow some memory to be freed.
Add wireless to the device list metrics.
Make all metrics clickable
Tweak graphs a bit
Implement limit configuration page.
Use sensors page as common code instead of duplicating.
Clean up some javascript interactions: Allow enter on values to save. Cancel if update is not needed. Enable the clear custom button after setting a custom value.
Add some wireless alert rules to the library.
Add documentation.
Add unifi client counts by ssid in addition to radio.
Optimize Sensor polling a bit.
Add HP MSM clients support (for full controller)
Fix function accessibility
Formalize the discovery and poller interfaces.
Add Xirrus clients and noise floor
move module interfaces to a more appropriate place.
push caching code up to os, unsure about this do to the limitations
No point in selectively enabling wireless discovery. We only discover if the device supports something.
Add RSSI, Power, and Rate.
Add these sensors for Ubnt Airos.
Clean up some copyrights.
Reduce the amount of files need to add new types.
Leave graph files for consistency and to allow customization.
Remove the old wifi clients graph completely.
ciscowlc should have improved counts (total and per-ssid)
Schema didn't get added.
Impelement the rest of the AirOS sensors
Reformat and re-organize the Airos.php class.
Add several UBNT AirFiber sensors
A few fixes add links to the section headers
Add HP MSM mibs.
* Schema file got dropped in rebase.
* Add wireless menu to view sensors across all devices.
Icons in the menu need help :/
* Add HeliOS, Mimosa, and Siklu support
Sensors added SNR + Noise
* Add power and utilization to Unifi
* Update polling to prefetch all sensor data in a few snmp requests as possible
* Add Extendair: tx+rx power, aggregate rate, frequency
* Add a check for duplicate sensors in discovery. Just print an error for now.
* Add Bit Error Ratio (named error-ratio to allow for bit error rate to be added if needed)
Fix an incorrect link in the wireless sensors table
* Add error rate and change all bps and Hz to use si units
* Fixes to limits and frequency display
* Fix overview graph frequency display
A few decimal place tweaks
* Don't allow switching sensor and wireless-sensor graphs, it doesn't work.
Change individual distance graphs to use si units
* Go through the OS and make sure I got all the sensors I can (probably missed some still)
Because pollWirelessChannelAsFrequency() is generic and a little complex, so pull it up to OS.
Message to help developers adding supports that don't return an array from discover functions.
* Fix some issues
* Remove noise and signal for now at least
A couple more fixes
Add a notification
* Oopsie
* Bonus AirFiber sensors
2017-05-01 23:49:11 -05:00
|
|
|
success: function(data){
|
2018-09-16 19:23:12 +02:00
|
|
|
if (data.status != 'error') {
|
|
|
|
if (data.status == 'ok') {
|
|
|
|
toastr.success(data.message);
|
|
|
|
} else {
|
|
|
|
toastr.info(data.message);
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
toastr.error(data.message);
|
|
|
|
}
|
feature: Wireless Sensors Overhaul (#6471)
* feature: Wireless Sensors
Includes client counts for ios and unifi
Graphing could use some improvement.
Alerting and threshold ui not implemented
WIP: starting OO based wireless sensors.
Class based functionality working
remove old functional files
add schema file
discovery needs to be enabled, not polling
fix up schema
fix Unifi discovery not returning an array
Add some debug when discovering a sensor.
Fix style.
Add missing semicolin
Add a null object (Generic) for OS.
Fill out some phpdocs
Re-organized code
Each sensor type now has it's own discovery and polling interface
Custom polling tested with Unifi CCQ
Left to do:
Implement UI (Graphs and Custom thresholds)
Alerting
Testing
Fix event message text
Remove runDiscovery and runPolling from OS, they are unused and don't belong there.
Cleanups/docs
Missed this file.
Remove the requirement to fetch the current value to check validity.
Do that automatically if current is not specified
A few cleanups here and there
First pass at graphing.
device_ and wireless_ graphs added.
Add RouterOS support
Singleton OS instance isn't required right now.
Remove that to allow some memory to be freed.
Add wireless to the device list metrics.
Make all metrics clickable
Tweak graphs a bit
Implement limit configuration page.
Use sensors page as common code instead of duplicating.
Clean up some javascript interactions: Allow enter on values to save. Cancel if update is not needed. Enable the clear custom button after setting a custom value.
Add some wireless alert rules to the library.
Add documentation.
Add unifi client counts by ssid in addition to radio.
Optimize Sensor polling a bit.
Add HP MSM clients support (for full controller)
Fix function accessibility
Formalize the discovery and poller interfaces.
Add Xirrus clients and noise floor
move module interfaces to a more appropriate place.
push caching code up to os, unsure about this do to the limitations
No point in selectively enabling wireless discovery. We only discover if the device supports something.
Add RSSI, Power, and Rate.
Add these sensors for Ubnt Airos.
Clean up some copyrights.
Reduce the amount of files need to add new types.
Leave graph files for consistency and to allow customization.
Remove the old wifi clients graph completely.
ciscowlc should have improved counts (total and per-ssid)
Schema didn't get added.
Impelement the rest of the AirOS sensors
Reformat and re-organize the Airos.php class.
Add several UBNT AirFiber sensors
A few fixes add links to the section headers
Add HP MSM mibs.
* Schema file got dropped in rebase.
* Add wireless menu to view sensors across all devices.
Icons in the menu need help :/
* Add HeliOS, Mimosa, and Siklu support
Sensors added SNR + Noise
* Add power and utilization to Unifi
* Update polling to prefetch all sensor data in a few snmp requests as possible
* Add Extendair: tx+rx power, aggregate rate, frequency
* Add a check for duplicate sensors in discovery. Just print an error for now.
* Add Bit Error Ratio (named error-ratio to allow for bit error rate to be added if needed)
Fix an incorrect link in the wireless sensors table
* Add error rate and change all bps and Hz to use si units
* Fixes to limits and frequency display
* Fix overview graph frequency display
A few decimal place tweaks
* Don't allow switching sensor and wireless-sensor graphs, it doesn't work.
Change individual distance graphs to use si units
* Go through the OS and make sure I got all the sensors I can (probably missed some still)
Because pollWirelessChannelAsFrequency() is generic and a little complex, so pull it up to OS.
Message to help developers adding supports that don't return an array from discover functions.
* Fix some issues
* Remove noise and signal for now at least
A couple more fixes
Add a notification
* Oopsie
* Bonus AirFiber sensors
2017-05-01 23:49:11 -05:00
|
|
|
},
|
2019-01-09 19:40:27 -06:00
|
|
|
error:function(data){
|
2018-09-16 19:23:12 +02:00
|
|
|
toastr.error(data.message);
|
feature: Wireless Sensors Overhaul (#6471)
* feature: Wireless Sensors
Includes client counts for ios and unifi
Graphing could use some improvement.
Alerting and threshold ui not implemented
WIP: starting OO based wireless sensors.
Class based functionality working
remove old functional files
add schema file
discovery needs to be enabled, not polling
fix up schema
fix Unifi discovery not returning an array
Add some debug when discovering a sensor.
Fix style.
Add missing semicolin
Add a null object (Generic) for OS.
Fill out some phpdocs
Re-organized code
Each sensor type now has it's own discovery and polling interface
Custom polling tested with Unifi CCQ
Left to do:
Implement UI (Graphs and Custom thresholds)
Alerting
Testing
Fix event message text
Remove runDiscovery and runPolling from OS, they are unused and don't belong there.
Cleanups/docs
Missed this file.
Remove the requirement to fetch the current value to check validity.
Do that automatically if current is not specified
A few cleanups here and there
First pass at graphing.
device_ and wireless_ graphs added.
Add RouterOS support
Singleton OS instance isn't required right now.
Remove that to allow some memory to be freed.
Add wireless to the device list metrics.
Make all metrics clickable
Tweak graphs a bit
Implement limit configuration page.
Use sensors page as common code instead of duplicating.
Clean up some javascript interactions: Allow enter on values to save. Cancel if update is not needed. Enable the clear custom button after setting a custom value.
Add some wireless alert rules to the library.
Add documentation.
Add unifi client counts by ssid in addition to radio.
Optimize Sensor polling a bit.
Add HP MSM clients support (for full controller)
Fix function accessibility
Formalize the discovery and poller interfaces.
Add Xirrus clients and noise floor
move module interfaces to a more appropriate place.
push caching code up to os, unsure about this do to the limitations
No point in selectively enabling wireless discovery. We only discover if the device supports something.
Add RSSI, Power, and Rate.
Add these sensors for Ubnt Airos.
Clean up some copyrights.
Reduce the amount of files need to add new types.
Leave graph files for consistency and to allow customization.
Remove the old wifi clients graph completely.
ciscowlc should have improved counts (total and per-ssid)
Schema didn't get added.
Impelement the rest of the AirOS sensors
Reformat and re-organize the Airos.php class.
Add several UBNT AirFiber sensors
A few fixes add links to the section headers
Add HP MSM mibs.
* Schema file got dropped in rebase.
* Add wireless menu to view sensors across all devices.
Icons in the menu need help :/
* Add HeliOS, Mimosa, and Siklu support
Sensors added SNR + Noise
* Add power and utilization to Unifi
* Update polling to prefetch all sensor data in a few snmp requests as possible
* Add Extendair: tx+rx power, aggregate rate, frequency
* Add a check for duplicate sensors in discovery. Just print an error for now.
* Add Bit Error Ratio (named error-ratio to allow for bit error rate to be added if needed)
Fix an incorrect link in the wireless sensors table
* Add error rate and change all bps and Hz to use si units
* Fixes to limits and frequency display
* Fix overview graph frequency display
A few decimal place tweaks
* Don't allow switching sensor and wireless-sensor graphs, it doesn't work.
Change individual distance graphs to use si units
* Go through the OS and make sure I got all the sensors I can (probably missed some still)
Because pollWirelessChannelAsFrequency() is generic and a little complex, so pull it up to OS.
Message to help developers adding supports that don't return an array from discover functions.
* Fix some issues
* Remove noise and signal for now at least
A couple more fixes
Add a notification
* Oopsie
* Bonus AirFiber sensors
2017-05-01 23:49:11 -05:00
|
|
|
}
|
|
|
|
});
|
|
|
|
});
|
|
|
|
$("[name='remove-custom']").on('click', function(event) {
|
|
|
|
event.preventDefault();
|
|
|
|
var $this = $(this);
|
|
|
|
var sensor_id = $(this).data("sensor_id");
|
|
|
|
$.ajax({
|
|
|
|
type: 'POST',
|
|
|
|
url: 'ajax_form.php',
|
|
|
|
data: { type: "<?php echo $ajax_prefix; ?>-alert-update", sensor_id: sensor_id, sub_type: "remove-custom" },
|
2018-09-16 19:23:12 +02:00
|
|
|
dataType: "json",
|
feature: Wireless Sensors Overhaul (#6471)
* feature: Wireless Sensors
Includes client counts for ios and unifi
Graphing could use some improvement.
Alerting and threshold ui not implemented
WIP: starting OO based wireless sensors.
Class based functionality working
remove old functional files
add schema file
discovery needs to be enabled, not polling
fix up schema
fix Unifi discovery not returning an array
Add some debug when discovering a sensor.
Fix style.
Add missing semicolin
Add a null object (Generic) for OS.
Fill out some phpdocs
Re-organized code
Each sensor type now has it's own discovery and polling interface
Custom polling tested with Unifi CCQ
Left to do:
Implement UI (Graphs and Custom thresholds)
Alerting
Testing
Fix event message text
Remove runDiscovery and runPolling from OS, they are unused and don't belong there.
Cleanups/docs
Missed this file.
Remove the requirement to fetch the current value to check validity.
Do that automatically if current is not specified
A few cleanups here and there
First pass at graphing.
device_ and wireless_ graphs added.
Add RouterOS support
Singleton OS instance isn't required right now.
Remove that to allow some memory to be freed.
Add wireless to the device list metrics.
Make all metrics clickable
Tweak graphs a bit
Implement limit configuration page.
Use sensors page as common code instead of duplicating.
Clean up some javascript interactions: Allow enter on values to save. Cancel if update is not needed. Enable the clear custom button after setting a custom value.
Add some wireless alert rules to the library.
Add documentation.
Add unifi client counts by ssid in addition to radio.
Optimize Sensor polling a bit.
Add HP MSM clients support (for full controller)
Fix function accessibility
Formalize the discovery and poller interfaces.
Add Xirrus clients and noise floor
move module interfaces to a more appropriate place.
push caching code up to os, unsure about this do to the limitations
No point in selectively enabling wireless discovery. We only discover if the device supports something.
Add RSSI, Power, and Rate.
Add these sensors for Ubnt Airos.
Clean up some copyrights.
Reduce the amount of files need to add new types.
Leave graph files for consistency and to allow customization.
Remove the old wifi clients graph completely.
ciscowlc should have improved counts (total and per-ssid)
Schema didn't get added.
Impelement the rest of the AirOS sensors
Reformat and re-organize the Airos.php class.
Add several UBNT AirFiber sensors
A few fixes add links to the section headers
Add HP MSM mibs.
* Schema file got dropped in rebase.
* Add wireless menu to view sensors across all devices.
Icons in the menu need help :/
* Add HeliOS, Mimosa, and Siklu support
Sensors added SNR + Noise
* Add power and utilization to Unifi
* Update polling to prefetch all sensor data in a few snmp requests as possible
* Add Extendair: tx+rx power, aggregate rate, frequency
* Add a check for duplicate sensors in discovery. Just print an error for now.
* Add Bit Error Ratio (named error-ratio to allow for bit error rate to be added if needed)
Fix an incorrect link in the wireless sensors table
* Add error rate and change all bps and Hz to use si units
* Fixes to limits and frequency display
* Fix overview graph frequency display
A few decimal place tweaks
* Don't allow switching sensor and wireless-sensor graphs, it doesn't work.
Change individual distance graphs to use si units
* Go through the OS and make sure I got all the sensors I can (probably missed some still)
Because pollWirelessChannelAsFrequency() is generic and a little complex, so pull it up to OS.
Message to help developers adding supports that don't return an array from discover functions.
* Fix some issues
* Remove noise and signal for now at least
A couple more fixes
Add a notification
* Oopsie
* Bonus AirFiber sensors
2017-05-01 23:49:11 -05:00
|
|
|
success: function(data){
|
2018-09-16 19:23:12 +02:00
|
|
|
toastr.success(data.message);
|
feature: Wireless Sensors Overhaul (#6471)
* feature: Wireless Sensors
Includes client counts for ios and unifi
Graphing could use some improvement.
Alerting and threshold ui not implemented
WIP: starting OO based wireless sensors.
Class based functionality working
remove old functional files
add schema file
discovery needs to be enabled, not polling
fix up schema
fix Unifi discovery not returning an array
Add some debug when discovering a sensor.
Fix style.
Add missing semicolin
Add a null object (Generic) for OS.
Fill out some phpdocs
Re-organized code
Each sensor type now has it's own discovery and polling interface
Custom polling tested with Unifi CCQ
Left to do:
Implement UI (Graphs and Custom thresholds)
Alerting
Testing
Fix event message text
Remove runDiscovery and runPolling from OS, they are unused and don't belong there.
Cleanups/docs
Missed this file.
Remove the requirement to fetch the current value to check validity.
Do that automatically if current is not specified
A few cleanups here and there
First pass at graphing.
device_ and wireless_ graphs added.
Add RouterOS support
Singleton OS instance isn't required right now.
Remove that to allow some memory to be freed.
Add wireless to the device list metrics.
Make all metrics clickable
Tweak graphs a bit
Implement limit configuration page.
Use sensors page as common code instead of duplicating.
Clean up some javascript interactions: Allow enter on values to save. Cancel if update is not needed. Enable the clear custom button after setting a custom value.
Add some wireless alert rules to the library.
Add documentation.
Add unifi client counts by ssid in addition to radio.
Optimize Sensor polling a bit.
Add HP MSM clients support (for full controller)
Fix function accessibility
Formalize the discovery and poller interfaces.
Add Xirrus clients and noise floor
move module interfaces to a more appropriate place.
push caching code up to os, unsure about this do to the limitations
No point in selectively enabling wireless discovery. We only discover if the device supports something.
Add RSSI, Power, and Rate.
Add these sensors for Ubnt Airos.
Clean up some copyrights.
Reduce the amount of files need to add new types.
Leave graph files for consistency and to allow customization.
Remove the old wifi clients graph completely.
ciscowlc should have improved counts (total and per-ssid)
Schema didn't get added.
Impelement the rest of the AirOS sensors
Reformat and re-organize the Airos.php class.
Add several UBNT AirFiber sensors
A few fixes add links to the section headers
Add HP MSM mibs.
* Schema file got dropped in rebase.
* Add wireless menu to view sensors across all devices.
Icons in the menu need help :/
* Add HeliOS, Mimosa, and Siklu support
Sensors added SNR + Noise
* Add power and utilization to Unifi
* Update polling to prefetch all sensor data in a few snmp requests as possible
* Add Extendair: tx+rx power, aggregate rate, frequency
* Add a check for duplicate sensors in discovery. Just print an error for now.
* Add Bit Error Ratio (named error-ratio to allow for bit error rate to be added if needed)
Fix an incorrect link in the wireless sensors table
* Add error rate and change all bps and Hz to use si units
* Fixes to limits and frequency display
* Fix overview graph frequency display
A few decimal place tweaks
* Don't allow switching sensor and wireless-sensor graphs, it doesn't work.
Change individual distance graphs to use si units
* Go through the OS and make sure I got all the sensors I can (probably missed some still)
Because pollWirelessChannelAsFrequency() is generic and a little complex, so pull it up to OS.
Message to help developers adding supports that don't return an array from discover functions.
* Fix some issues
* Remove noise and signal for now at least
A couple more fixes
Add a notification
* Oopsie
* Bonus AirFiber sensors
2017-05-01 23:49:11 -05:00
|
|
|
$this.addClass('disabled');
|
|
|
|
},
|
2019-01-09 19:40:27 -06:00
|
|
|
error:function(data){
|
2018-09-16 19:23:12 +02:00
|
|
|
toastr.error(data.message);
|
feature: Wireless Sensors Overhaul (#6471)
* feature: Wireless Sensors
Includes client counts for ios and unifi
Graphing could use some improvement.
Alerting and threshold ui not implemented
WIP: starting OO based wireless sensors.
Class based functionality working
remove old functional files
add schema file
discovery needs to be enabled, not polling
fix up schema
fix Unifi discovery not returning an array
Add some debug when discovering a sensor.
Fix style.
Add missing semicolin
Add a null object (Generic) for OS.
Fill out some phpdocs
Re-organized code
Each sensor type now has it's own discovery and polling interface
Custom polling tested with Unifi CCQ
Left to do:
Implement UI (Graphs and Custom thresholds)
Alerting
Testing
Fix event message text
Remove runDiscovery and runPolling from OS, they are unused and don't belong there.
Cleanups/docs
Missed this file.
Remove the requirement to fetch the current value to check validity.
Do that automatically if current is not specified
A few cleanups here and there
First pass at graphing.
device_ and wireless_ graphs added.
Add RouterOS support
Singleton OS instance isn't required right now.
Remove that to allow some memory to be freed.
Add wireless to the device list metrics.
Make all metrics clickable
Tweak graphs a bit
Implement limit configuration page.
Use sensors page as common code instead of duplicating.
Clean up some javascript interactions: Allow enter on values to save. Cancel if update is not needed. Enable the clear custom button after setting a custom value.
Add some wireless alert rules to the library.
Add documentation.
Add unifi client counts by ssid in addition to radio.
Optimize Sensor polling a bit.
Add HP MSM clients support (for full controller)
Fix function accessibility
Formalize the discovery and poller interfaces.
Add Xirrus clients and noise floor
move module interfaces to a more appropriate place.
push caching code up to os, unsure about this do to the limitations
No point in selectively enabling wireless discovery. We only discover if the device supports something.
Add RSSI, Power, and Rate.
Add these sensors for Ubnt Airos.
Clean up some copyrights.
Reduce the amount of files need to add new types.
Leave graph files for consistency and to allow customization.
Remove the old wifi clients graph completely.
ciscowlc should have improved counts (total and per-ssid)
Schema didn't get added.
Impelement the rest of the AirOS sensors
Reformat and re-organize the Airos.php class.
Add several UBNT AirFiber sensors
A few fixes add links to the section headers
Add HP MSM mibs.
* Schema file got dropped in rebase.
* Add wireless menu to view sensors across all devices.
Icons in the menu need help :/
* Add HeliOS, Mimosa, and Siklu support
Sensors added SNR + Noise
* Add power and utilization to Unifi
* Update polling to prefetch all sensor data in a few snmp requests as possible
* Add Extendair: tx+rx power, aggregate rate, frequency
* Add a check for duplicate sensors in discovery. Just print an error for now.
* Add Bit Error Ratio (named error-ratio to allow for bit error rate to be added if needed)
Fix an incorrect link in the wireless sensors table
* Add error rate and change all bps and Hz to use si units
* Fixes to limits and frequency display
* Fix overview graph frequency display
A few decimal place tweaks
* Don't allow switching sensor and wireless-sensor graphs, it doesn't work.
Change individual distance graphs to use si units
* Go through the OS and make sure I got all the sensors I can (probably missed some still)
Because pollWirelessChannelAsFrequency() is generic and a little complex, so pull it up to OS.
Message to help developers adding supports that don't return an array from discover functions.
* Fix some issues
* Remove noise and signal for now at least
A couple more fixes
Add a notification
* Oopsie
* Bonus AirFiber sensors
2017-05-01 23:49:11 -05:00
|
|
|
}
|
|
|
|
});
|
|
|
|
});
|
|
|
|
|
|
|
|
</script>
|