mirror/librenms-librenms
1
0
Fork 0
mirror of https://github.com/librenms/librenms.git synced 2024-10-07 16:52:45 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
Files
c3afca79a3f4c17b8cd6e8ca8e2eb76b95e1b581
librenms-librenms/mibs/CTRON-SFPS-PORT-MIB

1046 lines
38 KiB
Plaintext
Raw Normal View History

more mibs (thanks netdot people for collecting these, we will trust you that they are not broken) git-svn-id: http://www.observium.org/svn/observer/trunk@1402 61d68cd4-352d-0410-923a-c4978735b2b8
2010-07-18 05:05:04 +00:00
CTRON-SFPS-PORT-MIB DEFINITIONS ::= BEGIN
-- sfps-port-mib.txt
-- Revision: 0.0.11
--
-- Cabletron Systems, Inc.
-- 35 Industrial Way, P.O. Box 5005
-- Rochester, NH 03867-0505
-- (603) 332-9400
-- support@ctron.com
--
-- This module provides authoritative definitions for Cabletron's
-- enterprise specific Fast Packet Switching Services API MIB.
--
-- This module will be extended, as required.
--
--
-- Cabletron Systems reserves the right to make changes in
-- specification and other information contained in this document
-- without prior notice. The reader should consult Cabletron Systems
-- to determine whether any such changes have been made.
--
-- In no event shall Cabletron Systems be liable for any incidental,
-- indirect, special, or consequential damages whatsoever (including
-- but not limited to lost profits) arising out of or related to this
-- document or the information contained in it, even if Cabletron
-- Systems has been advised of, known, or should have known, the
-- possibility of such damages.
--
-- Cabletron grants vendors, end-users, and other interested parties
-- a non-exclusive license to use this Specification in connection
-- with the management of Cabletron products.
-- Copyright October 93 Cabletron Systems
--
IMPORTS
OBJECT-TYPE
FROM RFC-1212
DisplayString
FROM RFC1213-MIB
-- tcl enterprises
Counter, TimeTicks, Gauge
FROM RFC1155-SMI
-- These Objects are defined in the file sfps-inc.mib.txt.0.0.1
sfpsPortConfig, sfpsPortStats, sfpsPortAttributeTable,
sfpsPortAttributeAPI
FROM CTRON-SFPS-INCLUDE-MIB;
-- Textual Conventions
--SfpsSwitchInstance ::= OCTET STRING (SIZE(4))
-- this will map to chassis.module index value
SfpsSwitchPort ::= INTEGER
-- this will map to chassis.module.portgroup.portsubgroup.port index value
--SfpsAddress ::= OCTET STRING (SIZE (6))
-- this will map to a MAC address
HexInteger ::= INTEGER
-- display this integer in hex format
-- SFPS Switching Port Group
-- This group contains the managed objects used to setup and
-- configure the SFPS ports for packet switching and statisics
-- monitoring. This group contains two sub-groups: configuration
-- and statistics.
-- SFPS Port Configuration Tables
-- This table contains the managed objects used to set-up and configure
-- each SFPS switching port. A seperate table exists for inbound ports
-- and outbound ports.
-- Inbound ports.
sfpsInPortConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF SfpsInPortConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains the configuration information of each
configured inbound SFPS switch port. If SFPS is not
configured on a port, than an entry will not exist."
::= { sfpsPortConfig 1 }
sfpsInPortConfigEntry OBJECT-TYPE
SYNTAX SfpsInPortConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry specifies the SFPS configuration for the SFPS
inbound switch port for which the entry exists."
INDEX { sfpsInPortConfigPort }
::= { sfpsInPortConfigTable 1 }
SfpsInPortConfigEntry ::=
SEQUENCE {
sfpsInPortConfigPort SfpsSwitchPort,
sfpsInPortConfigAdminStatus INTEGER,
sfpsInPortConfigOperStatus INTEGER,
sfpsInPortConfigOperTime TimeTicks,
sfpsInPortConfigType INTEGER,
sfpsInPortConfigReservedBW INTEGER,
sfpsInPortConfigAllocBW INTEGER,
sfpsInPortConfigQoS INTEGER,
sfpsInPortConfigQSize INTEGER,
sfpsInPortConfigQLen Gauge,
sfpsInPortConfigSwitchId OCTET STRING,
sfpsInPortConfigMediaType INTEGER,
sfpsInPortConfigFrontPanelPort SfpsSwitchPort,
sfpsInPortConfigLinkStatus INTEGER,
sfpsInPortConfigLinkStateAge TimeTicks,
sfpsInPortConfigRouterPort INTEGER,
sfpsInPortConfigSlotNumber INTEGER,
sfpsInPortConfigMib2PortId INTEGER,
sfpsInPortConfigTopoAgent DisplayString,
sfpsInPortConfigLayer3Learning INTEGER
}
sfpsInPortConfigPort OBJECT-TYPE
SYNTAX SfpsSwitchPort
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The primary index to the SFPS in port table. This identifies
the inbound SFPS switch port for which the entry exists."
::= { sfpsInPortConfigEntry 1 }
sfpsInPortConfigAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3),
loopback(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Sets the administrative state of the SFPS inbound switch port
for which the entry exists."
::= { sfpsInPortConfigEntry 2 }
sfpsInPortConfigOperStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
disabled(2), -- not running
enabled(3), -- running
pending-disable(4), -- shut-down in progress
pending-enable(5), -- start-up in progress
invalid-config(6), -- not running,invalid config
testing(7) -- in loopback mode
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the current operating condition of the SFPS
on the inbound switch port for which this entry exists."
::= { sfpsInPortConfigEntry 3 }
sfpsInPortConfigOperTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the elapsed time, in hundredths of a second,
that sfpsInPortOperStatus has been in its current
operational state on the SFPS inbound switch port for which
this entry exists."
::= { sfpsInPortConfigEntry 4 }
sfpsInPortConfigType OBJECT-TYPE
SYNTAX INTEGER {
other(1),
access-port(2),
network-port(3),
host-mgmt-port(4),
host-ctl-port(5),
unknown(6),
going-to-access(7),
hybrid-port(8),
stand-by(9),
network-only(10),
accessOnly(11),
raPrimary(12),
uplink(13),
fclStandby(14),
loopStandby(15),
raStandby(16),
flood(17),
uplinkFlood(18),
downlinkFlood(19),
unknown-ra-standby(20)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Sets the type of port access attribute for the inbound SFPS
port for which the entry exists. Access ports allow single
user or shared access and perform statisics and control;
network ports are equivalent to trunk ports with no access
control; host management port indicates the (virtual) port
to which the (internal) management agent is attached; host
control port indicates the port to redirect non-management
packets."
::= { sfpsInPortConfigEntry 5 }
sfpsInPortConfigReservedBW OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Sets the amount of Bandwidth that is reserved for the inbound
SFPS port for which this entry exists. This bandwidth is
set aside for this port and may be given to another port if
unused."
-- ? should this be in Mbits/sec or as a percentage of total b/w.
-- Currently defined as percentage of total b/w in switch.
::= { sfpsInPortConfigEntry 6 }
sfpsInPortConfigAllocBW OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Sets the amount of Bandwidth that is allocated for
the inbound SFPS port for which this entry exists.
This bandwidth may be less than the reserved
bandwidth."
-- ? should this be in Mbits/sec or as a percentage of total b/w.
-- Currently defined as percentage of total b/w in switch.
::= { sfpsInPortConfigEntry 7 }
sfpsInPortConfigQoS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Sets the desired QoS service class for the inbound
SFPS port for which this entry exists."
-- ? should this map to the ATM service classes
::= { sfpsInPortConfigEntry 8 }
sfpsInPortConfigQSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the maximum inbound queue size for this port.
Size is indicated in packets (packet descriptors)."
::= { sfpsInPortConfigEntry 9 }
sfpsInPortConfigQLen OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the actual inbound queue size for this port.
Size is indicated in packets (packet descriptors). This
is a transient value that reflects the current depth of
queue."
::= { sfpsInPortConfigEntry 10 }
sfpsInPortConfigSwitchId OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This entry is the id of the port."
::= { sfpsInPortConfigEntry 11 }
sfpsInPortConfigMediaType OBJECT-TYPE
SYNTAX INTEGER {
ethernet(1),
fddi(2),
atm-lec(3),
token-ring(4),
wan(5),
inb(6),
hcp(7),
hdp(8),
atm-svc(9),
atm-pvc(10),
unknown(11),
atm-forum-lec(12),
atm-forum-pvc(13),
atm-forum-svc(14)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { sfpsInPortConfigEntry 12 }
sfpsInPortConfigFrontPanelPort OBJECT-TYPE
SYNTAX SfpsSwitchPort
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This represents the front panel physical port number"
::= { sfpsInPortConfigEntry 13 }
sfpsInPortConfigLinkStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
linkUp(2),
linkDown(3),
link-N-A(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The link status of this port."
::= { sfpsInPortConfigEntry 14 }
sfpsInPortConfigLinkStateAge OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of time ticks that link has been in this state."
::= { sfpsInPortConfigEntry 15 }
sfpsInPortConfigRouterPort OBJECT-TYPE
SYNTAX INTEGER {
other(1),
router-port(2),
no-router(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifies whether this port is a router port."
::= { sfpsInPortConfigEntry 16 }
sfpsInPortConfigSlotNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Slot number in the chassis."
::= { sfpsInPortConfigEntry 17 }
sfpsInPortConfigMib2PortId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Mib2 Port id"
::= { sfpsInPortConfigEntry 18 }
sfpsInPortConfigTopoAgent OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Topology Agent"
::= { sfpsInPortConfigEntry 19 }
sfpsInPortConfigLayer3Learning OBJECT-TYPE
SYNTAX INTEGER {
other(1),
enabled(2),
disabled(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Topology Agent"
::= { sfpsInPortConfigEntry 22 }
-- Outbound Ports
sfpsOutPortConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF SfpsOutPortConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains the configuration information of each
configured outbound SFPS switch port. If SFPS is not
configured on a port, than an entry will not exist."
::= { sfpsPortConfig 2 }
sfpsOutPortConfigEntry OBJECT-TYPE
SYNTAX SfpsOutPortConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry specifies the SFPS configuration for the SFPS
outbound switch port for which the entry exists."
INDEX { sfpsOutPortConfigPort }
::= { sfpsOutPortConfigTable 1 }
SfpsOutPortConfigEntry ::=
SEQUENCE {
sfpsOutPortConfigPort SfpsSwitchPort,
sfpsOutPortConfigAdminStatus INTEGER,
sfpsOutPortConfigOperStatus INTEGER,
sfpsOutPortConfigOperTime TimeTicks,
sfpsOutPortConfigType INTEGER,
sfpsOutPortConfigReservedBW INTEGER,
sfpsOutPortConfigAllocBW INTEGER,
sfpsOutPortConfigQoS INTEGER,
sfpsOutPortConfigQSize INTEGER,
sfpsOutPortConfigQLen Gauge,
sfpsOutPortConfigSwitchId OCTET STRING,
sfpsOutPortConfigMediaType INTEGER,
sfpsOutPortConfigFrontPanelPort SfpsSwitchPort,
sfpsOutPortConfigLinkStatus INTEGER,
sfpsOutPortConfigLinkStateAge TimeTicks,
sfpsOutPortConfigRouterPort INTEGER,
sfpsOutPortConfigSlotNumber INTEGER,
sfpsOutPortConfigMib2PortId INTEGER
}
sfpsOutPortConfigPort OBJECT-TYPE
SYNTAX SfpsSwitchPort
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The primary index to the SFPS in port table. This identifies
the outbound SFPS switch port for which the entry exists."
::= { sfpsOutPortConfigEntry 1 }
sfpsOutPortConfigAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3),
loopback(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Sets the administrative state of the SFPS outbound switch port
for which the entry exists."
::= { sfpsOutPortConfigEntry 2 }
sfpsOutPortConfigOperStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
disabled(2), -- not running
enabled(3), -- running
pending-disable(4), -- shut-down in progress
pending-enable(5), -- start-up in progress
invalid-config(6), -- not running,invalid config
testing(7) -- in loopback mode
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the current operating condition of the SFPS
on the outbound switch port for which this entry exists."
::= { sfpsOutPortConfigEntry 3 }
sfpsOutPortConfigOperTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the elapsed time, in hundredths of a second,
that sfpsOutPortOperStatus has been in its current
operational state on the SFPS outbound switch port for which
this entry exists."
::= { sfpsOutPortConfigEntry 4 }
sfpsOutPortConfigType OBJECT-TYPE
SYNTAX INTEGER {
other(1),
access-port(2),
network-port(3),
host-mgmt-port(4),
host-ctl-port(5),
unknown(6),
going-to-access(7),
hybrid-port(8),
stand-by(9),
network-only(10),
accessOnly(11),
raPrimary(12),
standbyFCLConflict(13),
standbyLoopedPort(14),
standbyVersionConflict(15),
standbyRANonPrimary(16),
flood(17),
uplinkFlood(18),
downlinkFlood(19),
unknown-ra-standby(20)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Sets the type of port access attribute for the outbound SFPS
port for which the entry exists. Access ports allow single
user or shared access and perform statisics and control;
network ports are equivalent to trunk ports with no access
control; host management port indicates the (virtual) port
to which the (internal) management agent is attached; host
control port indicates the port to redirect non-management
packets."
::= { sfpsOutPortConfigEntry 5 }
sfpsOutPortConfigReservedBW OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Sets the amount of Bandwidth that is reserved for the outbound
SFPS port for which this entry exists. This bandwidth is
set aside for this port and may be given to another port if
unused."
-- ? should this be in Mbits/sec or as a percentage of total b/w.
-- Currently defined as percentage of total b/w in switch.
::= { sfpsOutPortConfigEntry 6 }
sfpsOutPortConfigAllocBW OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Sets the amount of Bandwidth that is allocated for
the outbound SFPS port for which this entry exists.
This bandwidth may be less than the reserved
bandwidth."
-- ? should this be in Mbits/sec or as a percentage of total b/w.
-- Currently defined as percentage of total b/w in switch.
::= { sfpsOutPortConfigEntry 7 }
sfpsOutPortConfigQoS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Sets the desired QoS service class for the outbound
SFPS port for which this entry exists."
-- ? should this map to the ATM service classes
::= { sfpsOutPortConfigEntry 8 }
sfpsOutPortConfigQSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the maximum outbound queue size for this port.
Size is indicated in packets (packet descriptors)."
::= { sfpsOutPortConfigEntry 9 }
sfpsOutPortConfigQLen OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the actual outbound queue size for this port.
Size is indicated in packets (packet descriptors). This
is a transient value that reflects the current depth of
queue."
::= { sfpsOutPortConfigEntry 10 }
sfpsOutPortConfigSwitchId OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This entry is id of the port."
::= { sfpsOutPortConfigEntry 11 }
sfpsOutPortConfigMediaType OBJECT-TYPE
SYNTAX INTEGER {
ethernet(1),
fddi(2),
atm-lec(3),
token-ring(4),
wan(5),
inb(6),
hcp(7),
hdp(8),
atm-encap(9),
atm-pvc(10),
unknown(11),
atm-forum-lec(12),
atm-forum-pvc(13),
atm-forum-svc(14)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { sfpsOutPortConfigEntry 12 }
sfpsOutPortConfigFrontPanelPort OBJECT-TYPE
SYNTAX SfpsSwitchPort
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { sfpsOutPortConfigEntry 13 }
sfpsOutPortConfigLinkStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
linkUp(2),
linkDown(3),
linkNA(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The link status of this port."
::= { sfpsOutPortConfigEntry 14 }
sfpsOutPortConfigLinkStateAge OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of time ticks that link has been in this state."
::= { sfpsOutPortConfigEntry 15 }
sfpsOutPortConfigRouterPort OBJECT-TYPE
SYNTAX INTEGER {
other(1),
router-port(2),
no-router(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifies whether this port is a router port."
::= { sfpsOutPortConfigEntry 16 }
sfpsOutPortConfigSlotNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Slot number in the chassis."
::= { sfpsOutPortConfigEntry 17 }
sfpsOutPortConfigMib2PortId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Mib2 Port id"
::= { sfpsOutPortConfigEntry 18 }
--
-- SFPS Switching Port Statistics Tables
-- This table contains the objects that specify the packet and byte counters
-- for each configured SFPS switching port. A separate table exists for
-- inbound and outbound ports.
-- Inbound ports.
sfpsInPortStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SfpsInPortStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains the packet and byte counters for each
inbound SFPS switch port."
::= { sfpsPortStats 1 }
sfpsInPortStatsEntry OBJECT-TYPE
SYNTAX SfpsInPortStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Specifies the SFPS packet and byte counters for the
inbound SFPS switch port for which this entry exists."
INDEX { sfpsInPortStatsPort }
::= { sfpsInPortStatsTable 1 }
SfpsInPortStatsEntry ::=
SEQUENCE {
sfpsInPortStatsPort SfpsSwitchPort,
sfpsInPortStatsAdminStatus INTEGER,
sfpsInPortStatsReset INTEGER,
sfpsInPortStatsOperTime TimeTicks,
sfpsInPortStatsPkts Counter,
sfpsInPortStatsDiscardPkts Counter,
sfpsInPortStatsBytes Counter,
sfpsInPortStatsDiscardBytes Counter,
sfpsInPortStatsQOverflows Counter,
sfpsInPortStatsLinkUps Counter,
sfpsInPortStatsLinkDowns Counter
}
sfpsInPortStatsPort OBJECT-TYPE
SYNTAX SfpsSwitchPort
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The primary index to the SFPS port table. This identifies
the SFPS inbound switch port for which the entry exists."
::= { sfpsInPortStatsEntry 1 }
sfpsInPortStatsAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Sets the administrative state of the SFPS packet and byte
counters on the inbound SFPS switch port for which this entry
exists."
::= { sfpsInPortStatsEntry 2 }
sfpsInPortStatsReset OBJECT-TYPE
SYNTAX INTEGER {
other(1),
reset(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Resets the SFPS packet and byte counters on the inbound SFPS
switch port for which this entry exists."
::= { sfpsInPortStatsEntry 3 }
sfpsInPortStatsOperTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the amount of time (# of time ticks) that the
port-specific SFPS packet and byte counters have been
active on the inbound SFPS switch port for which this entry
exists."
::= { sfpsInPortStatsEntry 4 }
sfpsInPortStatsPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of SFPS packets that have been
received, during sfpsInPortStatsOpertime, on the inbound
SFPS switch port for which this entry exists."
::= { sfpsInPortStatsEntry 5 }
sfpsInPortStatsDiscardPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of SFPS packets that have been
discarded (dropped), during sfpsInPortStatsOpertime, on the
inbound SFPS switch port for which this entry exists"
::= { sfpsInPortStatsEntry 6 }
sfpsInPortStatsBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of SFPS bytes that have been
received, during sfpsInPortStatsOperTime, on the inbound
SFPS switch port for which the entry exists."
::= { sfpsInPortStatsEntry 7 }
sfpsInPortStatsDiscardBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of bytes in the SFPS packets
that have been discarded (dropped), during
sfpsInPortStatsOperTime, on the inbound SFPS switch port for
which the entry exists."
::= { sfpsInPortStatsEntry 8 }
sfpsInPortStatsQOverflows OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of queue overflow conditions
have been experienced for the inbound SFPS switch port
for which the entry exists."
::= { sfpsInPortStatsEntry 9 }
sfpsInPortStatsLinkUps OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of link ups that this port has seen."
::= { sfpsInPortStatsEntry 10 }
sfpsInPortStatsLinkDowns OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of link downs that this port has seen."
::= { sfpsInPortStatsEntry 11 }
--
-- Outbound ports.
sfpsOutPortStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SfpsOutPortStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains the packet and byte counters for each
outbound SFPS switch port."
::= { sfpsPortStats 2 }
sfpsOutPortStatsEntry OBJECT-TYPE
SYNTAX SfpsOutPortStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Specifies the SFPS packet and byte counters for the
outbound SFPS switch port for which this entry exists."
INDEX { sfpsOutPortStatsPort }
::= { sfpsOutPortStatsTable 1 }
SfpsOutPortStatsEntry ::=
SEQUENCE {
sfpsOutPortStatsPort SfpsSwitchPort,
sfpsOutPortStatsAdminStatus INTEGER,
sfpsOutPortStatsReset INTEGER,
sfpsOutPortStatsOperTime TimeTicks,
sfpsOutPortStatsPkts Counter,
sfpsOutPortStatsDiscardPkts Counter,
sfpsOutPortStatsBytes Counter,
sfpsOutPortStatsDiscardBytes Counter,
sfpsOutPortStatsQOverflows Counter,
sfpsOutPortStatsLinkUps Counter,
sfpsOutPortStatsLinkDowns Counter
}
sfpsOutPortStatsPort OBJECT-TYPE
SYNTAX SfpsSwitchPort
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The primary index to the SFPS port table. This identifies
the SFPS outbound switch port for which the entry exists."
::= { sfpsOutPortStatsEntry 1 }
sfpsOutPortStatsAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Sets the administrative state of the SFPS packet and byte
counters on the outbound SFPS switch port for which this entry
exists."
::= { sfpsOutPortStatsEntry 2 }
sfpsOutPortStatsReset OBJECT-TYPE
SYNTAX INTEGER {
other(1),
reset(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Resets the SFPS packet and byte counters on the outbound SFPS
switch port for which this entry exists."
::= { sfpsOutPortStatsEntry 3 }
sfpsOutPortStatsOperTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the amount of time (# of time ticks) that the
port-specific SFPS packet and byte counters have been
active on the outbound SFPS switch port for which this entry
exists."
::= { sfpsOutPortStatsEntry 4 }
sfpsOutPortStatsPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of SFPS packets that have been
received, during sfpsOutPortStatsOpertime, on the outbound
SFPS switch port for which this entry exists."
::= { sfpsOutPortStatsEntry 5 }
sfpsOutPortStatsDiscardPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of SFPS packets that have been
discarded (dropped), during sfpsOutPortStatsOpertime, on the
outbound SFPS switch port for which this entry exists"
::= { sfpsOutPortStatsEntry 6 }
sfpsOutPortStatsBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of SFPS bytes that have been
received, during sfpsOutPortStatsOperTime, on the outbound
SFPS switch port for which the entry exists."
::= { sfpsOutPortStatsEntry 7 }
sfpsOutPortStatsDiscardBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of bytes in the SFPS packets
that have been discarded (dropped), during
sfpsOutPortStatsOperTime, on the outbound SFPS switch port for
which the entry exists."
::= { sfpsOutPortStatsEntry 8 }
sfpsOutPortStatsQOverflows OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of queue overflow conditions
have been experienced for the outbound SFPS switch port
for which the entry exists."
::= { sfpsOutPortStatsEntry 9 }
sfpsOutPortStatsLinkUps OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of link ups that this port has seen."
::= { sfpsOutPortStatsEntry 10 }
sfpsOutPortStatsLinkDowns OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of link downs that this port has seen."
::= { sfpsOutPortStatsEntry 11 }
-- Port Attributes
sfpsPortAttributePort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { sfpsPortAttributeTable 1 }
sfpsPortAttributeAttributes OBJECT-TYPE
SYNTAX HexInteger
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { sfpsPortAttributeTable 2 }
sfpsPortAttributeLearnSelfArp OBJECT-TYPE
SYNTAX INTEGER {
off(2),
on(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { sfpsPortAttributeTable 3 }
-- Port Attributes API
sfpsPortAttributeAPIVerb OBJECT-TYPE
SYNTAX INTEGER {
other(1),
resetAll(2),
resetPort(3),
enablePortAttr(4),
disablePortAttr(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { sfpsPortAttributeAPI 1 }
sfpsPortAttributeAPIPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { sfpsPortAttributeAPI 2 }
sfpsPortAttributeAPIAttribute OBJECT-TYPE
SYNTAX INTEGER {
none(2),
learnSelfArp(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { sfpsPortAttributeAPI 3 }
END
Reference in New Issue Copy Permalink