mirror/librenms-librenms
1
0
Fork 0
mirror of https://github.com/librenms/librenms.git synced 2024-10-07 16:52:45 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
Files
d0d84503f11ca20461e8d8b4981dde1e5ddfa1c2
librenms-librenms/mibs/CTRON-FDDI-FNB-MIB

949 lines
36 KiB
Plaintext
Raw Normal View History

more mibs (thanks netdot people for collecting these, we will trust you that they are not broken) git-svn-id: http://www.observium.org/svn/observer/trunk@1402 61d68cd4-352d-0410-923a-c4978735b2b8
2010-07-18 05:05:04 +00:00
CTRON-FDDI-FNB-MIB DEFINITIONS ::= BEGIN
-- CTRON-FDDI-FNB-mib.txt The FDDI FNB backplane control MIB
-- Revision: 1.01.00
-- Date: September 13, 1995
-- Cabletron Systems, Inc.
-- 35 Industrial Way, P.O. Box 5005
-- Rochester, NH 03867-0505
-- (603) 332-9400
-- support@ctron.com
-- This module provides authoritative definitions for Cabletron's
-- enterprise-specific connection MIB.
--
-- This module will be extended, as needed.
--
-- Cabletron Systems reserves the right to make changes in
-- specification and other information contained in this document
-- without prior notice. The reader should consult Cabletron Systems
-- to determine whether any such changes have been made.
--
-- In no event shall Cabletron Systems be liable for any incidental,
-- indirect, special, or consequential damages whatsoever (including
-- but not limited to lost profits) arising out of or related to this
-- document or the information contained in it, even if Cabletron
-- Systems has been advised of, known, or should have known, the
-- possibility of such damages.
--
-- Cabletron grants vendors, end-users, and other interested parties
-- a non-exclusive license to use this Specification in connection
-- with the management of Cabletron products.
-- Copyright August 95 Cabletron Systems
IMPORTS
Counter
FROM RFC1155-SMI
ctFDDIFnb
FROM CTRON-MIB-NAMES
DisplayString
FROM RFC1213-MIB
OBJECT-TYPE
FROM RFC-1212;
-- DisplayString ::= OCTET STRING
-- This MIB module uses the extended OBJECT-TYPE macro as defined
-- RFC 1212
--====== group definitions ===========
ctFDDIResource OBJECT IDENTIFIER ::= { ctFDDIFnb 1 }
ctFDDINonMux OBJECT IDENTIFIER ::= { ctFDDIFnb 2 }
ctFDDIMux OBJECT IDENTIFIER ::= { ctFDDIFnb 3 }
ctFDDISerialConfig OBJECT IDENTIFIER ::= { ctFDDIFnb 4 }
--===== ctFDDIResource group ========
ctFDDIResourceTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtFDDIResourceEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table specifies the physical resources
associated with the FNB and general FNB operation for a
particular module in a particular slot."
::= { ctFDDIResource 1 }
ctFDDIResourceEntry OBJECT-TYPE
SYNTAX CtFDDIResourceEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Defines a specific physical resource entry"
INDEX { ctFDDIResourceSlotID, ctFDDIResourceID }
::= { ctFDDIResourceTable 1 }
CtFDDIResourceEntry ::= SEQUENCE {
ctFDDIResourceSlotID
INTEGER,
ctFDDIResourceID
INTEGER,
ctFDDIResourceType
OBJECT IDENTIFIER,
ctFDDIResourceNumbInstance
INTEGER
}
ctFDDIResourceSlotID OBJECT-TYPE
SYNTAX INTEGER (1..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A specific instance of a slot as defined by chSlotID
as defined in the chassis MIB."
::= { ctFDDIResourceEntry 1 }
ctFDDIResourceID OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A unique index that defines a specific physcial resource for
which this relationship exists. The value of this is as
defined by chResourceID in the chassis MIB."
::= { ctFDDIResourceEntry 2 }
ctFDDIResourceType OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Defines the type of resource. This is the same value as
chResourceType in the chassis MIB."
::= { ctFDDIResourceEntry 3 }
ctFDDIResourceNumbInstance OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object defines the number of instances of a physical
resource.
Specific resource instances are physically located from
top-to-bottom on a particular module. If there are multiple
'columns' of a resource from the top to the bottom, then
the numbering will start from the left side and proceed
top-to-bottom in each column.
For instance, the first FNB ring will be instance 1 (top
in the chassis) while the second FNB ring is instance 2
(below FNB 1 in the backplane)."
::= { ctFDDIResourceEntry 4 }
-- The ctFDDINonMuxGroup
-- This group pertains to all devices that provide FDDI conectivity
-- which are not multiplexed.
ctFDDINonMuxCapTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtFDDINonMuxCapEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table describes all possible capabilities/configurations
for all non-muxed FDDI configurations within the chassis."
::= { ctFDDINonMux 1 }
ctFDDINonMuxCapEntry OBJECT-TYPE
SYNTAX CtFDDINonMuxCapEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Describes a particular capability/configuration entry."
INDEX { ctFDDINMSlot, ctFDDINMConfigID }
::= { ctFDDINonMuxCapTable 1 }
CtFDDINonMuxCapEntry ::= SEQUENCE {
ctFDDINMSlot
INTEGER,
ctFDDINMConfigID
INTEGER,
ctFDDINMConfig
DisplayString,
ctFDDINMConfigDesc
DisplayString
}
ctFDDINMSlot OBJECT-TYPE
SYNTAX INTEGER (1..256)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The slot within the chassis for which this
configuration information is defined."
::= { ctFDDINonMuxCapEntry 1 }
ctFDDINMConfigID OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The instance of a particular configuration."
::= { ctFDDINonMuxCapEntry 2 }
ctFDDINMConfig OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object defines a specific valid connection
configuration. It will specify the connection state of all
resource instances. If an instance of a resource is
not specified, then it is disconnected.
Each valid configuration is encoded in an ascii string, using
a specified format for interpretation. The connection
specifications are in groups of four where each group defines
a specific connection configuration. The terms of a connection
group is defined as follows:
1st - The resource ID as defined by
ctFDDIResourceID.
2nd - A specific instance of the physical
resource. This will be a value between 1 and
ctFDDIResourceNumbInstance for the particular
resource ID in the first term. If a resource ID
has more than one specific resource instance, but
the whole resource can be connected, then this
term will have the value '0' to signify all instances
of the resource.
3rd - The connection ID for this specific
physical resource. This value is the same as
ctFDDINMConnectionID, and through the
ctFDDINonMuxConnectionTable maps to a specific
instance of SMT and MAC.
For example if the value of this object is '1.1.2.2.1.1',
then it states that resource 1, instance 1 is connected to
connection ID 2 and resource 2, instance 1 is connected to
connection ID 1 and is inserted into its FDDI ring.
If a valid configuration is no connections then this
object will have a value of '0.0.0'"
::= { ctFDDINonMuxCapEntry 3 }
ctFDDINMConfigDesc OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object contains a textual description of a valid
connection configuration. This is a more user-friendly
representation of the configuration than the ctFDDINMConfig
object."
::= { ctFDDINonMuxCapEntry 4 }
ctFDDINonMuxCapEnableTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtFDDINonMuxCapEnableEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table describes the currently enabled configuration
for each module."
::= { ctFDDINonMux 2 }
ctFDDINonMuxCapEnableEntry OBJECT-TYPE
SYNTAX CtFDDINonMuxCapEnableEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Describes a specific configuration enable entry."
INDEX { ctFDDINMEnableSlot }
::= { ctFDDINonMuxCapEnableTable 1 }
CtFDDINonMuxCapEnableEntry ::= SEQUENCE {
ctFDDINMEnableSlot
INTEGER,
ctFDDINMCapEnable
INTEGER
}
ctFDDINMEnableSlot OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A specific slot for which this configuration enable
pertains."
::= { ctFDDINonMuxCapEnableEntry 1 }
ctFDDINMCapEnable OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A specific configuration that is enabled.
Enabling a configuration is done by writing the value of
ctFDDINMConfigID for a specific configuration to this object.
This object, when read, will return the value of
ctFDDINMConfigID for the presently enabled configuration."
::= { ctFDDINonMuxCapEnableEntry 2 }
ctFDDINonMuxConnectionTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtFDDINonMuxConnectionEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table defines specific information for each defined
FDDI/FNB connection. This maps the third sub identifier
of ctFDDINMConfig to a particular SMT and MAC instance in
the 1512 FDDI MIB."
::= { ctFDDINonMux 3 }
ctFDDINonMuxConnectionEntry OBJECT-TYPE
SYNTAX CtFDDINonMuxConnectionEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Defines a specific configuration connection entry."
INDEX { ctFDDINMConnectionSlot, ctFDDINMConnectionID }
::= { ctFDDINonMuxConnectionTable 1 }
CtFDDINonMuxConnectionEntry ::= SEQUENCE {
ctFDDINMConnectionSlot
INTEGER,
ctFDDINMConnectionID
INTEGER,
ctFDDINMSMT
INTEGER,
ctFDDINMMAC
INTEGER,
ctFDDINMBytes
INTEGER,
ctFDDINMFrames
INTEGER
}
ctFDDINMConnectionSlot OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A specific slot for which this connection entry is
defined."
::= { ctFDDINonMuxConnectionEntry 1 }
ctFDDINMConnectionID OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Describes a specific connection identifier. Valid
connection identifiers are defined by the third
sub-identifier in ctFDDINMConfig as identified by
ctFDDINMCapEnable."
::= { ctFDDINonMuxConnectionEntry 2 }
ctFDDINMSMT OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A specific instance of SMT for which this entry pertains."
REFERENCE
"The IETF RFC FDDI-SMT73-MIB, fddimibSMTIndex"
::= { ctFDDINonMuxConnectionEntry 3 }
ctFDDINMMAC OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A specific MAC that this connection entry pertains."
REFERENCE
"The IETF RFC FDDI-SMT73-MIB, fddimibMACIndex"
::= { ctFDDINonMuxConnectionEntry 4 }
ctFDDINMBytes OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The bandwidth utilization in bytes per second."
::= { ctFDDINonMuxConnectionEntry 5 }
ctFDDINMFrames OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The bandwidth utilization in frames per second."
::= { ctFDDINonMuxConnectionEntry 6 }
ctFDDINonMuxInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtFDDINonMuxInterfaceEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table describs the number of interfaces defined by
each non multiplexing FDDI FNB module."
::= { ctFDDINonMux 4 }
ctFDDINonMuxInterfaceEntry OBJECT-TYPE
SYNTAX CtFDDINonMuxInterfaceEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A specfic non multiplexing module interface definition."
INDEX { ctFDDINMInterSlot }
::= { ctFDDINonMuxInterfaceTable 1 }
CtFDDINonMuxInterfaceEntry ::= SEQUENCE {
ctFDDINMInterSlot
INTEGER,
ctFDDINMNumbInterfaces
INTEGER
}
ctFDDINMInterSlot OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A specific slot for which this inteface entry is
defined."
::= { ctFDDINonMuxInterfaceEntry 1 }
ctFDDINMNumbInterfaces OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of interfaces defined on this particular
module."
::= { ctFDDINonMuxInterfaceEntry 2 }
-- the ctFDDIMuxGroup
-- This groups controls those devices that perform a FDDI multiplexing
-- operation
ctFDDIMuxCapTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtFDDIMuxCapEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table describes all possible configuration/capabilities
defined for a FDDI multiplexing module."
::= { ctFDDIMux 1 }
ctFDDIMuxCapEntry OBJECT-TYPE
SYNTAX CtFDDIMuxCapEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Describes a specfic FDDI multiplexor capability/configuration
entry."
INDEX { ctFDDIMuxSlot, ctFDDIMuxConfig }
::= { ctFDDIMuxCapTable 1 }
CtFDDIMuxCapEntry ::= SEQUENCE {
ctFDDIMuxSlot
INTEGER,
ctFDDIMuxConfigID
INTEGER,
ctFDDIMuxConfig
DisplayString,
ctFDDIMuxConfigDesc
DisplayString
}
ctFDDIMuxSlot OBJECT-TYPE
SYNTAX INTEGER (1..256)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Defines the slot within the chassis for which this
multiplexed capability/configuration entry pertains."
::= { ctFDDIMuxCapEntry 1 }
ctFDDIMuxConfigID OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The instance of a particular configuration."
::= { ctFDDIMuxCapEntry 2 }
ctFDDIMuxConfig OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object defines a specific valid connection
configuration. It will specify the connection state of all
resource instances. If an instance of a resource is
not specified, then it is disconnected.
Each valid configuration is encoded in an ascii string, using
a specified format for interpretation. The specific
connections are in groups of four where each group defines a
specific connection configuration. The terms of the connection
group are defined as follows:
1st - Resource ID. The value is the same as
ctFDDIResourceID for a specific resource entry.
2nd - Instance of the resource. This has a value in
the range of 1 to ctFDDIResourceNumbInstance.
3rd - Path of the resource as input to the
multiplexor. Paths are specified as 1
for the primary ring and 2 for the secondary.
4th - This is the multiplexor output channel
that this resource comes out of the multiplexor.
This value is the same as a value of ctFDDIMuxOutID.
5th - Ring Connectivity. This sub-identifier
describes if the given mux-in resource
(sub-identifiers 1-3) is inserted into the backplane
FNB ring. Valid values are 0 for no 1 for yes.
So for example a value of 1.1.1.1.0.2.2.2.2.1 is resource 1,
instance 1 (primary) is on mux-out 1 and it's not inserted;
resource 2, instance 2 (secondary) is on mux-out 2 and
is inserted into the backplane.
If a valid configuration is no connections then this
object will have a value of '0.0.0.0.0'"
::= { ctFDDIMuxCapEntry 3 }
ctFDDIMuxConfigDesc OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object contains a textual description of a valid
connection configuration. This is a more user-friendly
representation of the configuration than the ctFDDIMuxConfig
object."
::= { ctFDDIMuxCapEntry 4 }
ctFDDIMuxCapEnableTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtFDDIMuxCapEnableEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table describes the currently enabled configuration
for each module."
::= { ctFDDIMux 2 }
ctFDDIMuxCapEnableEntry OBJECT-TYPE
SYNTAX CtFDDIMuxCapEnableEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Describes a specific configuration enable entry."
INDEX { ctFDDIMuxEnableSlot }
::= { ctFDDIMuxCapEnableTable 1 }
CtFDDIMuxCapEnableEntry ::= SEQUENCE {
ctFDDIMuxEnableSlot
INTEGER,
ctFDDIMuxCapEnable
INTEGER,
ctFDDIMuxMasterPortAssignmentChange
Counter
}
ctFDDIMuxEnableSlot OBJECT-TYPE
SYNTAX INTEGER (1..256)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A specific slot for which this configuration enable
pertains."
::= { ctFDDIMuxCapEnableEntry 1 }
ctFDDIMuxCapEnable OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A specific instance of the configuration that is
enabled.
Setting this object with a specific value of ctFDDIMuxConfigID
enabled that configuration. A request of the value of this
object will return the value of ctFDDIMuxConfigID for the
presently enabled configuration."
::= { ctFDDIMuxCapEnableEntry 2 }
ctFDDIMuxMasterPortAssignmentChange OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Depicts the number of changes to the master port to multiplexor
output mapping."
::= { ctFDDIMuxCapEnableEntry 3 }
ctFDDIMuxOutTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtFDDIMuxOutEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Describes the multiplexor outputs for each of the
FNB multiplexor modules. This maps the multiplexor output
to a specific instance of MAC and SMT in the FDDI MIB."
::= { ctFDDIMux 3 }
ctFDDIMuxOutEntry OBJECT-TYPE
SYNTAX CtFDDIMuxOutEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Describes a particular multiplexor output."
INDEX { ctFDDIMuxOutSlot, ctFDDIMuxOutID }
::= { ctFDDIMuxOutTable 1 }
CtFDDIMuxOutEntry ::= SEQUENCE {
ctFDDIMuxOutSlot
INTEGER,
ctFDDIMuxOutID
INTEGER,
ctFDDIMuxOutMACIndex
INTEGER,
ctFDDIMuxOutSMTIndex
INTEGER,
ctFDDIMuxBytes
INTEGER,
ctFDDIMuxFrames
INTEGER
}
ctFDDIMuxOutSlot OBJECT-TYPE
SYNTAX INTEGER (1..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The given slot for which this multiplexor output information
pertains."
::= { ctFDDIMuxOutEntry 1 }
ctFDDIMuxOutID OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The specific instance of the multiplexor output. Instances
of this object are used by the values of ctFDDIMuxConfig."
::= { ctFDDIMuxOutEntry 2 }
ctFDDIMuxOutMACIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The MAC instance of this multiplexor output. If this
this object has a value greater than 0, then this
value is the same as fddimibMACIndex. If this object has the
value of 0, the given mux-out does not have a MAC."
REFERENCE
"The IETF RFC FDDI-SMT73-MIB, fddimibMACIndex"
::= { ctFDDIMuxOutEntry 3 }
ctFDDIMuxOutSMTIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Identifies the instance of SMT as defined within the
FDDI MIB."
REFERENCE
"The IETF RFC FDDI-SMT73-MIB, fddimibSMTIndex"
::= { ctFDDIMuxOutEntry 4 }
ctFDDIMuxBytes OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The bandwidth utilization in bytes per second."
::= { ctFDDIMuxOutEntry 5 }
ctFDDIMuxFrames OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The bandwidth utilization in frames per second."
::= { ctFDDIMuxOutEntry 6 }
ctFDDIMuxMasterPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtFDDIMuxMasterPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of entries that define master ports as they are
defined for the given multiplexed FDDI connection."
::= { ctFDDIMux 4 }
ctFDDIMuxMasterPortEntry OBJECT-TYPE
SYNTAX CtFDDIMuxMasterPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A specific FDDI-FNB multiplexed master port definition."
INDEX { ctFDDIMuxMasterPortSlotID, ctFDDIMuxMasterPortID }
::= { ctFDDIMuxMasterPortTable 1 }
CtFDDIMuxMasterPortEntry ::= SEQUENCE {
ctFDDIMuxMasterPortSlotID
INTEGER,
ctFDDIMuxMasterPortID
INTEGER,
ctFDDIMuxMasterPortAssignment
INTEGER,
ctFDDIMuxMasterPortIndex
INTEGER
}
ctFDDIMuxMasterPortSlotID OBJECT-TYPE
SYNTAX INTEGER (1..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A specific instance of a slot as defined by chSlotID."
::= { ctFDDIMuxMasterPortEntry 1 }
ctFDDIMuxMasterPortID OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A unique identifier for this specific master port."
::= { ctFDDIMuxMasterPortEntry 2 }
ctFDDIMuxMasterPortAssignment OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Provides the masterport to multiplexor output mapping.
This is as defined by ctFDDIMuxOutMacAssignment."
::= { ctFDDIMuxMasterPortEntry 3 }
ctFDDIMuxMasterPortIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Defines a specific port within the FDDI MIBs fddimibPORTTable."
REFERENCE
"The IETF RFC FDDI-SMT73-MIB, fddimibPORTIndex"
::= { ctFDDIMuxMasterPortEntry 4 }
-- The ctFDDISerialControl group
-- This group describes the control over the FDDI serial controlled
-- modules.
ctFDDINumbModules OBJECT-TYPE
SYNTAX INTEGER (0..14)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Describes the number of modules that are present configurable
thru the serial control portion of this MIB.
This directly reflects the number of rows found within the
ctFDDISerialConfigTable."
::= { ctFDDISerialConfig 1 }
ctFDDISerialConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtFDDISerialConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table describes the adminstrative control over each
of the FNB serial control modules."
::= { ctFDDISerialConfig 2 }
ctFDDISerialConfigEntry OBJECT-TYPE
SYNTAX CtFDDISerialConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Describes the controls over a single FNB serial control
entry."
INDEX { ctFDDISerialSlotID }
::= { ctFDDISerialConfigTable 1 }
CtFDDISerialConfigEntry ::= SEQUENCE {
ctFDDISerialSlotID
INTEGER,
ctFDDISerialAdminStatus
INTEGER,
ctFDDISerialOperStatus
INTEGER
}
ctFDDISerialSlotID OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Defines the slot that this FNB serial control module is in.
This is an instance of chSlotID as defined in the chassis MIB."
::= { ctFDDISerialConfigEntry 1 }
ctFDDISerialAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
insertFNB1(1),
insertFNB2(2),
insertFNB1FNB2(3),
bypass(4),
hwControlFNB1(5),
hwControlFNB2(6),
hwControl(7) -- Use hardware control
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Describes the adminstrative desired state for this FNB
serial control module.
insertFNB1(1) - The serial controlled module should be
inserted into FNB-1 and bypass FNB-2.
insertFNB2(2) - The serial contolled module should be
inserted into FNB-2 and bypass FNB-1.
insertFNB1FNB2(3) - Insert the serial controlled module
on both FNBs.
bypass(4) - Bypass the connection to both FNBs.
hwControlFNB1(5) - Use hardware settings for FNB-1.
hwControlFNB2(6) - Use hardware settings for FNB-2.
hwControl(7) - Use the hardware settings for both
FNBs."
::= { ctFDDISerialConfigEntry 2 }
ctFDDISerialOperStatus OBJECT-TYPE
SYNTAX INTEGER {
insertFNB1(1),
insertFNB2(2),
insertFNB1FNB2(3),
bypass(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Describes the operational status of this FDDI serial
controlled module.
insertFNB1(1) - The serial controlled module is
inserted into FNB-1 and bypassed from FNB-2.
insertFNB2(2) - The serial controlled module is
bypassed from FNB-1 and inserted into FNB-2.
insertFNB1FNB2(3) - The serial controlled module is
inserted into both FNB-1 and FNB-2.
bypass(4) - The serial controlled module is bypassed
from both FNB-1 and FNB-2."
::= { ctFDDISerialConfigEntry 3 }
ctFDDIModuleFPIMTable OBJECT-TYPE
SYNTAX SEQUENCE OF CtFDDIModuleFPIMEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table describes the FPIMs that are on the front panel of
each FDDI serial control module, if that module supports FPIMs."
::= { ctFDDISerialConfig 3 }
ctFDDIModuleFPIMEntry OBJECT-TYPE
SYNTAX CtFDDIModuleFPIMEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Describes a single FDDI FPIM on a module."
INDEX { ctFddiFPIMSlotID, ctFddiFPIM }
::= { ctFDDIModuleFPIMTable 1 }
CtFDDIModuleFPIMEntry ::= SEQUENCE {
ctFddiFPIMSlotID
INTEGER,
ctFddiFPIM
INTEGER,
ctFddiFPIMStatus
INTEGER,
ctFddiFPIMType
OBJECT IDENTIFIER
}
ctFddiFPIMSlotID OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Defines the slot in which this module exists. This
is an instance of chSlotID as found in the chassis MIB."
::= { ctFDDIModuleFPIMEntry 1 }
ctFddiFPIM OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Defines the instance of the port for which this definition
is made. Ports are physically located from top-to-bottom on a
particular module. If there are multiple 'columns' of ports
from the top to the bottom, then the numbering will start
from the left side and proceed top-to-bottom in each column."
::= { ctFDDIModuleFPIMEntry 2 }
ctFddiFPIMStatus OBJECT-TYPE
SYNTAX INTEGER {
link(1),
noLink(2),
notSupported(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Describes the link status of the given FPIM.
A value of link(1) states that a link is present.
A value of noLink(2) states that no link is present.
A value of notSupported(3) means that link status is not
supported by this port and is unknown."
::= { ctFDDIModuleFPIMEntry 4 }
ctFddiFPIMType OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Describes the type of FPIM as found in ctron-oids."
::= { ctFDDIModuleFPIMEntry 5 }
END
Reference in New Issue Copy Permalink