librenms-librenms/mibs/arubaos/WLSX-VOICE-MIB

--- ArubaOS 8.8.0.1_80393
-- vim:set ts=4 sw=4:
WLSX-VOICE-MIB DEFINITIONS ::= BEGIN

   IMPORTS
       TEXTUAL-CONVENTION FROM SNMPv2-TC 
       
       MODULE-IDENTITY,
       OBJECT-TYPE,
       snmpModules,
       Integer32,
       Unsigned32,
	   Counter32,
	   IpAddress,
	   NOTIFICATION-TYPE
           FROM SNMPv2-SMI

       TDomain,
       DisplayString,
       PhysAddress,
       TAddress,
       TimeInterval,
       RowStatus,
       StorageType,
       TestAndIncr,
       DateAndTime,
	   MacAddress,
	   TruthValue
           FROM SNMPv2-TC
           
       ArubaEnableValue,
	   ArubaVlanValidRange,
	   ArubaVoiceCacBit,
	   ArubaVoiceCdrDirection,
	   ArubaVoipRegState,
	   ArubaVoipProtocol,
	   ArubaCallStates
	   		FROM ARUBA-TC
	   wlanStaPhyAddress,
	   wlanAPMacAddress, 
	   wlanAPRadioNumber, 
	   wlanAPBSSID
           FROM WLSX-WLAN-MIB
       OBJECT-GROUP
           FROM SNMPv2-CONF
		wlsxEnterpriseMibModules
			FROM ARUBA-MIB;

   wlsxVoiceMIB MODULE-IDENTITY 
       LAST-UPDATED "202008141745Z"
       ORGANIZATION "Aruba, a Hewlett Packard Enterprise company"
       CONTACT-INFO
            "Postal:    3333 Scott Blvd,
                        Santa Clara, CA 95054
            E-mail:     aruba-ext-eng-reg@hpe.com
            Phone:      408 227 4500
            Fax:        408 752 0626"
       DESCRIPTION
           "This MIB module defines MIB objects which provide
            information about Voice call status and call detail reporting
		in the Aruba controller."
       REVISION        "202008141745Z"
       DESCRIPTION
           "The initial revision."
       ::= { wlsxEnterpriseMibModules 12 }

   wlsxVoiceStatsGroup          OBJECT IDENTIFIER ::= { wlsxVoiceMIB 1 }

   wlsxVoiceCdrInfoGroup     	OBJECT IDENTIFIER ::= { wlsxVoiceStatsGroup 1 }
   wlsxVoiceCallCtrsGroup		OBJECT IDENTIFIER ::= { wlsxVoiceStatsGroup 2 }
   wlsxVoiceClientInfoGroup     OBJECT IDENTIFIER ::= { wlsxVoiceStatsGroup 3 }
   wlsxVoiceCallCtrPerClientInfoGroup	OBJECT IDENTIFIER ::= { wlsxVoiceStatsGroup 4 }
   wlsxVoiceClientLocationInfoGroup     OBJECT IDENTIFIER ::= { wlsxVoiceStatsGroup 5 }

   wlsxVoiceCdrTotal  OBJECT-TYPE 
         SYNTAX       Unsigned32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Total Number of CDR info in the controller.
            "
        ::= { wlsxVoiceCdrInfoGroup 1 }

   wlsxVoiceCdrTable  OBJECT-TYPE 
	  SYNTAX       SEQUENCE OF VoiceCdrEntry
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
	  	"
			This table lists Call Detail Record Info. 
		"
      ::= { wlsxVoiceCdrInfoGroup 2 } 
      
      
   wlsxVoiceCdrEntry OBJECT-TYPE
	  SYNTAX       VoiceCdrEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
             ""
	  INDEX {voiceCdrId}
      ::= { wlsxVoiceCdrTable 1 } 
      

--- Based on voip_mgr.h:voip_sip_call_cdr_t
   VoiceCdrEntry ::=
     SEQUENCE {
	voiceCdrId				Unsigned32,
	voiceCdrIp				IpAddress,
	voiceCdrMac				MacAddress,
	voiceCdrName				DisplayString,
	voiceCdrDialNum			DisplayString,
	voiceCdrDir				ArubaVoiceCdrDirection,
	voiceCdrOrigTime			Unsigned32,
	voiceCdrSetupTime			Unsigned32,
	voiceCdrTeardownTime			Unsigned32,
	voiceCdrStatus			ArubaCallStates,
	voiceCdrReason			DisplayString,
	voiceCdrDuration			Integer32,
	voiceCdrRValueA			Integer32,
	voiceCdrApSwitchDelay		Integer32,
	voiceCdrCodec			Integer32,
	voiceCdrApName			DisplayString,
	voiceCdrApMac			MacAddress,
	voiceCdrBssid			DisplayString,
	voiceCdrEssid			DisplayString,
	voiceCdrHandovers			Integer32,
	voiceCdrMOS				DisplayString,
	voiceCdrDelayA           DisplayString,
	voiceCdrJitterA			DisplayString,
	voiceCdrPktLossA			DisplayString,
	voiceCdrRValueC			Integer32,
	voiceCdrDelayC           DisplayString,
	voiceCdrJitterC			DisplayString,
	voiceCdrPktLossC			DisplayString
    }
   	voiceCdrId OBJECT-TYPE
         SYNTAX       Unsigned32
  		 MAX-ACCESS   not-accessible		
         STATUS       current
         DESCRIPTION
            "
			Voice CDR id
            "
        ::= { wlsxVoiceCdrEntry 1 }
        
   	voiceCdrIp OBJECT-TYPE
         SYNTAX       IpAddress
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Voice CDR IP
            "
        ::= { wlsxVoiceCdrEntry 2 }
        
   	voiceCdrMac OBJECT-TYPE
         SYNTAX       MacAddress
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Voice CDR MAC
            "
        ::= { wlsxVoiceCdrEntry 3 }
        
   	voiceCdrName OBJECT-TYPE
         SYNTAX       DisplayString
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Voice CDR Name
            "
        ::= { wlsxVoiceCdrEntry 4 }
        
   	voiceCdrDialNum OBJECT-TYPE
         SYNTAX       DisplayString
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Voice CDR dialed number
            "
        ::= { wlsxVoiceCdrEntry 5 }
        
   	voiceCdrDir OBJECT-TYPE
         SYNTAX       ArubaVoiceCdrDirection
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Voice CDR direction incoming or outgoing
            "
        ::= { wlsxVoiceCdrEntry 6 }
        
   	voiceCdrOrigTime OBJECT-TYPE
         SYNTAX       Unsigned32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Voice CDR orig time
            "
        ::= { wlsxVoiceCdrEntry 7 }

   	voiceCdrSetupTime OBJECT-TYPE
         SYNTAX       Unsigned32
         MAX-ACCESS   read-only
         STATUS       deprecated
         DESCRIPTION
            "
			Voice CDR setup time
            "
        ::= { wlsxVoiceCdrEntry 8 }

   	voiceCdrTeardownTime OBJECT-TYPE
         SYNTAX       Unsigned32
         MAX-ACCESS   read-only
         STATUS       deprecated
         DESCRIPTION
            "
			Voice CDR teardown number
            "
        ::= { wlsxVoiceCdrEntry 9 }

   	voiceCdrStatus OBJECT-TYPE
         SYNTAX       ArubaCallStates
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Voice CDR Status
            "
        ::= { wlsxVoiceCdrEntry 10 }

   	voiceCdrReason OBJECT-TYPE
         SYNTAX       DisplayString
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Voice CDR Reason
            "
        ::= { wlsxVoiceCdrEntry 11 }

   	voiceCdrDuration OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Voice CDR Duration
            "
        ::= { wlsxVoiceCdrEntry 12 }

   	voiceCdrRValueA OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Voice CDR R-Value
            "
        ::= { wlsxVoiceCdrEntry 13 }

   	voiceCdrApSwitchDelay OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       deprecated
         DESCRIPTION
            "
			Voice CDR AP switch delay
            "
        ::= { wlsxVoiceCdrEntry 14 }

   	voiceCdrCodec OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Voice CDR codec
            "
        ::= { wlsxVoiceCdrEntry 15 }

   	voiceCdrApName OBJECT-TYPE
         SYNTAX       DisplayString
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Voice CDR AP Name
            "
        ::= { wlsxVoiceCdrEntry 16 }

   	voiceCdrApMac OBJECT-TYPE
         SYNTAX       MacAddress
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Voice CDR AP MAC Address
            "
        ::= { wlsxVoiceCdrEntry 17 }

   	voiceCdrBssid OBJECT-TYPE
         SYNTAX       DisplayString
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Voice CDR BSSID
            "
        ::= { wlsxVoiceCdrEntry 18 }

   	voiceCdrEssid OBJECT-TYPE
         SYNTAX       DisplayString
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Voice CDR ESSID
            "
        ::= { wlsxVoiceCdrEntry 19 }

   	voiceCdrHandovers OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Voice CDR client handovers AKA mobility rate
            "
        ::= { wlsxVoiceCdrEntry 20 }


   	voiceCdrMOS OBJECT-TYPE
         SYNTAX       DisplayString
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Voice CDR MOS
            "
        ::= { wlsxVoiceCdrEntry 21 }
		
	voiceCdrDelayA OBJECT-TYPE
         SYNTAX       DisplayString
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Voice CDR Delay at AP
            "
        ::= { wlsxVoiceCdrEntry 22 }
	
	voiceCdrJitterA OBJECT-TYPE
         SYNTAX       DisplayString
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Voice CDR Jitter at AP
            "
        ::= { wlsxVoiceCdrEntry 23 }
		
	voiceCdrPktLossA OBJECT-TYPE
         SYNTAX       DisplayString
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Voice CDR packet loss at AP
            "
        ::= { wlsxVoiceCdrEntry 24 }
		
	voiceCdrRValueC OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Voice CDR R-Value
            "
        ::= { wlsxVoiceCdrEntry 25 }

	voiceCdrDelayC OBJECT-TYPE
         SYNTAX       DisplayString
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Voice CDR Delay at Controller
            "
        ::= { wlsxVoiceCdrEntry 26 }
	
	voiceCdrJitterC OBJECT-TYPE
         SYNTAX       DisplayString
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Voice CDR Jitter at Controller
            "
        ::= { wlsxVoiceCdrEntry 27 }
		
	voiceCdrPktLossC OBJECT-TYPE
         SYNTAX       DisplayString
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Voice CDR packet loss at Controller
            "
        ::= { wlsxVoiceCdrEntry 28 }	
--
-- end VoiceCdrEntry
--



--
-- begin scalar counters
--
   voiceCallCtrsTotal  OBJECT-TYPE 
         SYNTAX       Unsigned32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Total Number of calls.
            "
        ::= { wlsxVoiceCallCtrsGroup 1 }

   voiceCallCtrsSuccess  OBJECT-TYPE 
         SYNTAX       Unsigned32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Total Number of successful calls.
            "
        ::= { wlsxVoiceCallCtrsGroup 2 }

   voiceCallCtrsFailed  OBJECT-TYPE 
         SYNTAX       Unsigned32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Total Number of failed calls.
            "
        ::= { wlsxVoiceCallCtrsGroup 3 }

   voiceCallCtrsRejected  OBJECT-TYPE 
         SYNTAX       Unsigned32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Total Number of rejected calls.
            "
        ::= { wlsxVoiceCallCtrsGroup 4 }

   voiceCallCtrsAborted  OBJECT-TYPE 
         SYNTAX       Unsigned32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Total Number of aborted calls.
            "
        ::= { wlsxVoiceCallCtrsGroup 5 }

   voiceCallCtrsOrig  OBJECT-TYPE 
         SYNTAX       Unsigned32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Total Number of originated calls.
            "
        ::= { wlsxVoiceCallCtrsGroup 6 }

   voiceCallCtrsRecvd  OBJECT-TYPE 
         SYNTAX       Unsigned32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Total number of received calls.
            "
        ::= { wlsxVoiceCallCtrsGroup 7 }

   voiceCallCtrsActive  OBJECT-TYPE 
         SYNTAX       Unsigned32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Total number of active calls.
            "
        ::= { wlsxVoiceCallCtrsGroup 8 }

   voiceCallCtrsNotFnd  OBJECT-TYPE 
         SYNTAX       Unsigned32
         MAX-ACCESS   read-only
         STATUS       deprecated
         DESCRIPTION
            "
			Total number of not found calls.
            "
        ::= { wlsxVoiceCallCtrsGroup 9 }

   voiceCallCtrsBusy  OBJECT-TYPE 
         SYNTAX       Unsigned32
         MAX-ACCESS   read-only
         STATUS       deprecated
         DESCRIPTION
            "
			Total number of busy calls.
            "
        ::= { wlsxVoiceCallCtrsGroup 10 }

   voiceCallCtrsSvc  OBJECT-TYPE 
         SYNTAX       Unsigned32
         MAX-ACCESS   read-only
         STATUS       deprecated
         DESCRIPTION
            "
			Total number of service unavailable calls.
            "
        ::= { wlsxVoiceCallCtrsGroup 11 }

   voiceCallCtrsReqTerm  OBJECT-TYPE 
         SYNTAX       Unsigned32
         MAX-ACCESS   read-only
         STATUS       deprecated
         DESCRIPTION
            "
			Total number of request terminated calls.
            "
        ::= { wlsxVoiceCallCtrsGroup 12 }

   voiceCallCtrsDecline  OBJECT-TYPE 
         SYNTAX       Unsigned32
         MAX-ACCESS   read-only
         STATUS       deprecated
         DESCRIPTION
            "
			Total number of declined calls.
            "
        ::= { wlsxVoiceCallCtrsGroup 13 }

   voiceCallCtrsUnauth  OBJECT-TYPE 
         SYNTAX       Unsigned32
         MAX-ACCESS   read-only
         STATUS       deprecated
         DESCRIPTION
            "
			Total number of unauthorized calls.
            "
        ::= { wlsxVoiceCallCtrsGroup 14 }

   voiceCallCtrsMisc  OBJECT-TYPE 
         SYNTAX       Unsigned32
         MAX-ACCESS   read-only
         STATUS       deprecated
         DESCRIPTION
            "
			Total number of miscellaneous calls.
            "
        ::= { wlsxVoiceCallCtrsGroup 15 }
--
-- end scalar counters
--


--
-- begin voice client
--
   wlsxVoiceClientTotal  OBJECT-TYPE 
         SYNTAX       Unsigned32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Total Number of Active client sessions in the controller.
            "
        ::= { wlsxVoiceClientInfoGroup 1 }


   wlsxVoiceClientTable  OBJECT-TYPE
		SYNTAX       SEQUENCE OF VoiceClientEntry 
        MAX-ACCESS   not-accessible		
        STATUS       current 
        DESCRIPTION 
	  	"
			This table lists all voice client Info
		"
      ::= { wlsxVoiceClientInfoGroup 2 } 
      
   wlsxVoiceClientEntry OBJECT-TYPE 
	  SYNTAX       VoiceClientEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
             ""
	  INDEX {wlanStaPhyAddress }
      ::= { wlsxVoiceClientTable 1 } 

      

--- Based on voip_cac.h:voip_client struct
   VoiceClientEntry ::=
	SEQUENCE {
		voiceClientIp			IpAddress,
		voiceClientProtocol			DisplayString,  
		voiceClientRegState			DisplayString,
		voiceClientContactName		DisplayString,
		voiceClientServerName		DisplayString,
		voiceClientEssid			DisplayString,
		voiceClientVlanId			ArubaVlanValidRange,
		voiceClientTunnelId			Integer32,
		voiceClientAvgDelay			DisplayString,
		voiceClientAvgJitter		DisplayString,
		voiceClientAvgPktLoss		DisplayString,
		voiceClientAvgCallDuration	Integer32
    }

   	voiceClientIp OBJECT-TYPE
         SYNTAX       IpAddress
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Voice client IP Address 
            "
        ::= { wlsxVoiceClientEntry 1 }

   	voiceClientProtocol OBJECT-TYPE
         SYNTAX       DisplayString 
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Voice client protocol used
            "
        ::= { wlsxVoiceClientEntry 2 }

   	voiceClientRegState OBJECT-TYPE
         SYNTAX       DisplayString 
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Voice client state
            "
        ::= { wlsxVoiceClientEntry 3 }

   	voiceClientContactName OBJECT-TYPE
         SYNTAX       DisplayString
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Voice client contact name
            "
        ::= { wlsxVoiceClientEntry 4 }

   	voiceClientServerName OBJECT-TYPE
         SYNTAX       DisplayString
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Voice client Server name
            "
        ::= { wlsxVoiceClientEntry 5 }

   	voiceClientEssid OBJECT-TYPE
         SYNTAX       DisplayString
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Voice client ESSID
            "
        ::= { wlsxVoiceClientEntry 6 }

   	voiceClientVlanId OBJECT-TYPE
         SYNTAX       ArubaVlanValidRange
         MAX-ACCESS   read-only
         STATUS       deprecated
         DESCRIPTION
            "
			Voice client VLAN id 
            "
        ::= { wlsxVoiceClientEntry 7 }

   	voiceClientTunnelId OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       deprecated
         DESCRIPTION
            "
			Voice client tunnel ID
            "
        ::= { wlsxVoiceClientEntry 8 }
		
	voiceClientAvgDelay OBJECT-TYPE
         SYNTAX       DisplayString
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Voice client Avg Delay
            "
        ::= { wlsxVoiceClientEntry 9 }
		
	voiceClientAvgJitter OBJECT-TYPE
         SYNTAX       DisplayString
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Voice client average Jitter
            "
        ::= { wlsxVoiceClientEntry 10 }
		
	voiceClientAvgPktLoss OBJECT-TYPE
         SYNTAX       DisplayString
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Voice client average packet loss
            "
        ::= { wlsxVoiceClientEntry 11 }
		
	voiceClientAvgCallDuration OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Voice client avg call duration
            "
        ::= { wlsxVoiceClientEntry 12 }
		

--
-- end voiceClientEntry
--

--
-- begin voice call counter per client entry
--

      
   wlsxVoiceCallCtrPerClientTotal  OBJECT-TYPE 
         SYNTAX       Unsigned32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Total number voice clients.
            "
        ::= { wlsxVoiceCallCtrPerClientInfoGroup 1 }

   wlsxVoiceCallCtrPerClientTable  OBJECT-TYPE
		SYNTAX       SEQUENCE OF VoiceCallCtrPerClientEntry 
        MAX-ACCESS   not-accessible		
        STATUS       current 
        DESCRIPTION 
	  	"
			This table lists all voice client Location Info
		"
      ::= { wlsxVoiceCallCtrPerClientInfoGroup 2 } 
      
   wlsxVoiceCallCtrPerClientEntry OBJECT-TYPE 
	  SYNTAX       VoiceCallCtrPerClientEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
             ""
	  INDEX { wlanStaPhyAddress }
      ::= { wlsxVoiceCallCtrPerClientTable 1 } 


   VoiceCallCtrPerClientEntry ::=
	SEQUENCE {
		voiceCallCtrTotal          Unsigned32,
		voiceCallCtrSuccess	    Unsigned32,  
		voiceCallCtrFailed	  		Unsigned32,
		voiceCallCtrRejected	    Unsigned32,
		voiceCallCtrAborted  	    Unsigned32,
		voiceCallCtrOrig	        Unsigned32,
		voiceCallCtrRecvd	        Unsigned32,
		voiceCallCtrActive	        Unsigned32
    }

   	voiceCallCtrTotal OBJECT-TYPE
         SYNTAX       Unsigned32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Voice total calls made by client 
            "
        ::= { wlsxVoiceCallCtrPerClientEntry 1 }

   	voiceCallCtrSuccess OBJECT-TYPE
         SYNTAX       Unsigned32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Voice total successful calls made by client 
            "
        ::= { wlsxVoiceCallCtrPerClientEntry 2 }

   	voiceCallCtrFailed OBJECT-TYPE
         SYNTAX       Unsigned32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Voice total failed calls made by client 
            "
        ::= { wlsxVoiceCallCtrPerClientEntry 3 }

   	voiceCallCtrRejected OBJECT-TYPE
         SYNTAX       Unsigned32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Voice total calls rejected by client
            "
        ::= { wlsxVoiceCallCtrPerClientEntry 4 }

   	voiceCallCtrAborted OBJECT-TYPE
         SYNTAX       Unsigned32 
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Voice total calls aborted by client 
            "
        ::= { wlsxVoiceCallCtrPerClientEntry 5 }

   	voiceCallCtrOrig OBJECT-TYPE
         SYNTAX       Unsigned32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Voice total call originated by client
            "
        ::= { wlsxVoiceCallCtrPerClientEntry 6 }

   	voiceCallCtrRecvd OBJECT-TYPE
         SYNTAX       Unsigned32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Voice total calls received by client 
            "
        ::= { wlsxVoiceCallCtrPerClientEntry 7 }
		
	voiceCallCtrActive OBJECT-TYPE
         SYNTAX       Unsigned32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Voice total currently aactive calls by client
            "
        ::= { wlsxVoiceCallCtrPerClientEntry 8 }

--
-- end call counter per client entry

--

--
-- begin voice client location entry
--

   wlsxVoiceClientLocationTotal  OBJECT-TYPE 
         SYNTAX       Unsigned32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Total Number of Active voice clients in the controller.
            "
        ::= { wlsxVoiceClientLocationInfoGroup 1 }

   wlsxVoiceClientLocationTable  OBJECT-TYPE
		SYNTAX       SEQUENCE OF VoiceClientLocationEntry 
        MAX-ACCESS   not-accessible		
        STATUS       current 
        DESCRIPTION 
	  	"
			This table lists all voice client Location Info
		"
      ::= { wlsxVoiceClientLocationInfoGroup 2 } 
      
   wlsxVoiceClientLocationEntry OBJECT-TYPE 
	  SYNTAX       VoiceClientLocationEntry 
	  MAX-ACCESS   not-accessible		
      STATUS       current 
      DESCRIPTION 
             ""
	  INDEX { wlanStaPhyAddress }
      ::= { wlsxVoiceClientLocationTable 1 } 


   VoiceClientLocationEntry ::=
	SEQUENCE {
		vcLocationIp          IpAddress,
		vcLocationMac	      MacAddress,  
		vcLocationSwitchIp	  IpAddress,
		vcLocationApName	  DisplayString,
		vcLocationApMac  	  MacAddress,
		vcLocationApMode	  Integer32,
		vcLocationApLoc	      DisplayString
    }

   	vcLocationIp OBJECT-TYPE
         SYNTAX       IpAddress
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Voice client IP Address 
            "
        ::= { wlsxVoiceClientLocationEntry 1 }

   	vcLocationMac OBJECT-TYPE
         SYNTAX       MacAddress
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Voice client Mac Address 
            "
        ::= { wlsxVoiceClientLocationEntry 2 }

   	vcLocationSwitchIp OBJECT-TYPE
         SYNTAX       IpAddress
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Voice Client Switch IP Address 
            "
        ::= { wlsxVoiceClientLocationEntry 3 }

   	vcLocationApName OBJECT-TYPE
         SYNTAX       DisplayString
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Voice Client AP Name
            "
        ::= { wlsxVoiceClientLocationEntry 4 }

   	vcLocationApMac OBJECT-TYPE
         SYNTAX       MacAddress 
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Voice client AP Mac Address 
            "
        ::= { wlsxVoiceClientLocationEntry 5 }

   	vcLocationApMode OBJECT-TYPE
         SYNTAX       Integer32
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Voice client AP Mode
            "
        ::= { wlsxVoiceClientLocationEntry 6 }

   	vcLocationApLoc OBJECT-TYPE
         SYNTAX       DisplayString
         MAX-ACCESS   read-only
         STATUS       current
         DESCRIPTION
            "
			Voice client Ap Location 
            "
        ::= { wlsxVoiceClientLocationEntry 7 }
--
-- end voice client location entry 
--
        
END