librenms-librenms/mibs/avtech/ROOMALERT32E-MIB

--
--defines ROOMALERT32E-MIB for SNMP agent extension of Room Alert 32E
--Contents:	Global Registration Module
--		Room Alert OIDs - Enterprise 20916
--Version:	3.1.0
--Date:		13 September 2017
--Developed By: AVTECH Software, Inc.

--
--Copyright (c) 2017 AVTECH Software, Inc.
--

ROOMALERT32E-MIB DEFINITIONS ::= BEGIN


IMPORTS
	enterprises, IpAddress, Counter, TimeTicks
		FROM RFC1155-SMI
	OBJECT-TYPE
		FROM RFC-1212
	TRAP-TYPE
		FROM RFC-1215;


avtech	OBJECT IDENTIFIER ::= { enterprises 20916 }
products	OBJECT IDENTIFIER ::= { avtech 1 }
roomalert32E	OBJECT IDENTIFIER ::= { products 8 }
sensors	OBJECT IDENTIFIER ::= { roomalert32E 1 }
internal	OBJECT IDENTIFIER ::= { sensors 1 }
temperature	OBJECT IDENTIFIER ::= { internal 1 }
humidity	OBJECT IDENTIFIER ::= { internal 2 }
power		OBJECT IDENTIFIER ::= { internal 3 }
heat-index	OBJECT IDENTIFIER ::= { internal 4 }
analog	OBJECT IDENTIFIER ::= { internal 5 }
relay       OBJECT IDENTIFIER ::= { internal 6 }
digital	OBJECT IDENTIFIER ::= { sensors 2 }
digital-sen1	OBJECT IDENTIFIER ::= { digital 1 }
digital-sen2	OBJECT IDENTIFIER ::= { digital 2 }
digital-sen3	OBJECT IDENTIFIER ::= { digital 3 }
digital-sen4	OBJECT IDENTIFIER ::= { digital 4 }
digital-sen5	OBJECT IDENTIFIER ::= { digital 5 }
digital-sen6	OBJECT IDENTIFIER ::= { digital 6 }
digital-sen7	OBJECT IDENTIFIER ::= { digital 7 }
digital-sen8	OBJECT IDENTIFIER ::= { digital 8 }
switch	OBJECT IDENTIFIER ::= { sensors 3 }
wireless	OBJECT IDENTIFIER ::= { sensors 4 }
wish-1	OBJECT IDENTIFIER ::= { wireless 1 }
wish-1-sensors	OBJECT IDENTIFIER ::= { wish-1 4 }
wish-1-internal	OBJECT IDENTIFIER ::= { wish-1-sensors 1 }
wish-1-external	OBJECT IDENTIFIER ::= { wish-1-sensors 2 }
wish-1-external-1	OBJECT IDENTIFIER ::= { wish-1-external 1 }
wish-1-external-2	OBJECT IDENTIFIER ::= { wish-1-external 2 }
wish-2	OBJECT IDENTIFIER ::= { wireless 2 }
wish-2-sensors	OBJECT IDENTIFIER ::= { wish-2 4 }
wish-2-internal	OBJECT IDENTIFIER ::= { wish-2-sensors 1 }
wish-2-external	OBJECT IDENTIFIER ::= { wish-2-sensors 2 }
wish-2-external-1	OBJECT IDENTIFIER ::= { wish-2-external 1 }
wish-2-external-2	OBJECT IDENTIFIER ::= { wish-2-external 2 }
wish-3	OBJECT IDENTIFIER ::= { wireless 3 }
wish-3-sensors	OBJECT IDENTIFIER ::= { wish-3 4 }
wish-3-internal	OBJECT IDENTIFIER ::= { wish-3-sensors 1 }
wish-3-external	OBJECT IDENTIFIER ::= { wish-3-sensors 2 }
wish-3-external-1	OBJECT IDENTIFIER ::= { wish-3-external 1 }
wish-3-external-2	OBJECT IDENTIFIER ::= { wish-3-external 2 }
wish-4	OBJECT IDENTIFIER ::= { wireless 4 }
wish-4-sensors	OBJECT IDENTIFIER ::= { wish-4 4 }
wish-4-internal	OBJECT IDENTIFIER ::= { wish-4-sensors 1 }
wish-4-external	OBJECT IDENTIFIER ::= { wish-4-sensors 2 }
wish-4-external-1	OBJECT IDENTIFIER ::= { wish-4-external 1 }
wish-4-external-2	OBJECT IDENTIFIER ::= { wish-4-external 2 }
wish-5	OBJECT IDENTIFIER ::= { wireless 5 }
wish-5-sensors	OBJECT IDENTIFIER ::= { wish-5 4 }
wish-5-internal	OBJECT IDENTIFIER ::= { wish-5-sensors 1 }
wish-5-external	OBJECT IDENTIFIER ::= { wish-5-sensors 2 }
wish-5-external-1	OBJECT IDENTIFIER ::= { wish-5-external 1 }
wish-5-external-2	OBJECT IDENTIFIER ::= { wish-5-external 2 }
wish-6	OBJECT IDENTIFIER ::= { wireless 6 }
wish-6-sensors	OBJECT IDENTIFIER ::= { wish-6 4 }
wish-6-internal	OBJECT IDENTIFIER ::= { wish-6-sensors 1 }
wish-6-external	OBJECT IDENTIFIER ::= { wish-6-sensors 2 }
wish-6-external-1	OBJECT IDENTIFIER ::= { wish-6-external 1 }
wish-6-external-2	OBJECT IDENTIFIER ::= { wish-6-external 2 }
wish-7	OBJECT IDENTIFIER ::= { wireless 7 }
wish-7-sensors	OBJECT IDENTIFIER ::= { wish-7 4 }
wish-7-internal	OBJECT IDENTIFIER ::= { wish-7-sensors 1 }
wish-7-external	OBJECT IDENTIFIER ::= { wish-7-sensors 2 }
wish-7-external-1	OBJECT IDENTIFIER ::= { wish-7-external 1 }
wish-7-external-2	OBJECT IDENTIFIER ::= { wish-7-external 2 }
wish-8	OBJECT IDENTIFIER ::= { wireless 8 }
wish-8-sensors	OBJECT IDENTIFIER ::= { wish-8 4 }
wish-8-internal	OBJECT IDENTIFIER ::= { wish-8-sensors 1 }
wish-8-external	OBJECT IDENTIFIER ::= { wish-8-sensors 2 }
wish-8-external-1	OBJECT IDENTIFIER ::= { wish-8-external 1 }
wish-8-external-2	OBJECT IDENTIFIER ::= { wish-8-external 2 }
wish-9	OBJECT IDENTIFIER ::= { wireless 9 }
wish-9-sensors	OBJECT IDENTIFIER ::= { wish-9 4 }
wish-9-internal	OBJECT IDENTIFIER ::= { wish-9-sensors 1 }
wish-9-external	OBJECT IDENTIFIER ::= { wish-9-sensors 2 }
wish-9-external-1	OBJECT IDENTIFIER ::= { wish-9-external 1 }
wish-9-external-2	OBJECT IDENTIFIER ::= { wish-9-external 2 }
wish-10	OBJECT IDENTIFIER ::= { wireless 10 }
wish-10-sensors	OBJECT IDENTIFIER ::= { wish-10 4 }
wish-10-internal	OBJECT IDENTIFIER ::= { wish-10-sensors 1 }
wish-10-external	OBJECT IDENTIFIER ::= { wish-10-sensors 2 }
wish-10-external-1	OBJECT IDENTIFIER ::= { wish-10-external 1 }
wish-10-external-2	OBJECT IDENTIFIER ::= { wish-10-external 2 }
wish-11	OBJECT IDENTIFIER ::= { wireless 11 }
wish-11-sensors	OBJECT IDENTIFIER ::= { wish-11 4 }
wish-11-internal	OBJECT IDENTIFIER ::= { wish-11-sensors 1 }
wish-11-external	OBJECT IDENTIFIER ::= { wish-11-sensors 2 }
wish-11-external-1	OBJECT IDENTIFIER ::= { wish-11-external 1 }
wish-11-external-2	OBJECT IDENTIFIER ::= { wish-11-external 2 }
wish-12	OBJECT IDENTIFIER ::= { wireless 12 }
wish-12-sensors	OBJECT IDENTIFIER ::= { wish-12 4 }
wish-12-internal	OBJECT IDENTIFIER ::= { wish-12-sensors 1 }
wish-12-external	OBJECT IDENTIFIER ::= { wish-12-sensors 2 }
wish-12-external-1	OBJECT IDENTIFIER ::= { wish-12-external 1 }
wish-12-external-2	OBJECT IDENTIFIER ::= { wish-12-external 2 }
wish-13	OBJECT IDENTIFIER ::= { wireless 13 }
wish-13-sensors	OBJECT IDENTIFIER ::= { wish-13 4 }
wish-13-internal	OBJECT IDENTIFIER ::= { wish-13-sensors 1 }
wish-13-external	OBJECT IDENTIFIER ::= { wish-13-sensors 2 }
wish-13-external-1	OBJECT IDENTIFIER ::= { wish-13-external 1 }
wish-13-external-2	OBJECT IDENTIFIER ::= { wish-13-external 2 }
wish-14	OBJECT IDENTIFIER ::= { wireless 14 }
wish-14-sensors	OBJECT IDENTIFIER ::= { wish-14 4 }
wish-14-internal	OBJECT IDENTIFIER ::= { wish-14-sensors 1 }
wish-14-external	OBJECT IDENTIFIER ::= { wish-14-sensors 2 }
wish-14-external-1	OBJECT IDENTIFIER ::= { wish-14-external 1 }
wish-14-external-2	OBJECT IDENTIFIER ::= { wish-14-external 2 }
wish-15	OBJECT IDENTIFIER ::= { wireless 15 }
wish-15-sensors	OBJECT IDENTIFIER ::= { wish-15 4 }
wish-15-internal	OBJECT IDENTIFIER ::= { wish-15-sensors 1 }
wish-15-external	OBJECT IDENTIFIER ::= { wish-15-sensors 2 }
wish-15-external-1	OBJECT IDENTIFIER ::= { wish-15-external 1 }
wish-15-external-2	OBJECT IDENTIFIER ::= { wish-15-external 2 }
traps	OBJECT IDENTIFIER ::= { roomalert32E 2 }
lighttowers OBJECT IDENTIFIER ::= { roomalert32E 3 }
lighttower1 OBJECT IDENTIFIER ::= { lighttowers 1 }
lighttower2 OBJECT IDENTIFIER ::= { lighttowers 2 }

-- Room Alert 32E MIB
-- Parameters


internal-tempf OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The internal temperature reading in Fahrenheit."
::= { temperature 1 }

internal-tempc OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The internal temperature reading in Celsius."
::= { temperature 2 }

internal-humidity OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The internal relative humidity reading in %RH."
::= { humidity 1 }

internal-heat-index OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		optional
	DESCRIPTION	"The internal heat index reading in Fahrenheit."
::= { heat-index 1 }

internal-heat-indexC OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		optional
	DESCRIPTION	"The internal heat index reading in Celsius."
::= { heat-index 2 }

internal-power OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current status of the Room Alert 32E power supply. A '1' indicates the unit is running on AC/Utility power. A '0' indicates the unit is running on battery backup power."
::= { power 1 }

internal-analog1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current status of the Room Alert 32E analog input (0-5VDC)."
::= { analog 1 }

internal-analog2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current status of the Room Alert 32E analog input (0-5VDC)."
::= { analog 2 }

internal-relay1 OBJECT-TYPE
	SYNTAX		INTEGER(0..1)
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"The status of the on-board relay output"
::= { relay 1 }

internal-relay2 OBJECT-TYPE
	SYNTAX		INTEGER(0..1)
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"The status of the on-board relay output"
::= { relay 2 }

digital-sen1-1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature, Temp/Humidity, Temp/Analog, or Temp/Active Power sensor, this value represents the current temperature in Celsius."
::= { digital-sen1 1 }

digital-sen1-2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature, Temp/Humidity, Temp/Analog, or Temp/Active Power sensor, this value represents the current temperature in Fahrenheit."
::= { digital-sen1 2 }

digital-sen1-3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog sensor, this value represents the current Voltage reading. If this is a Temp/Active Power sensor, this value represents the current power state (1=Power Detected, 0=No Power Detected)."
::= { digital-sen1 3 }

digital-sen1-4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current custom reading."
::= { digital-sen1 4 }

digital-sen1-5 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
::= { digital-sen1 5 }

digital-sen2-1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature, Temp/Humidity, Temp/Analog, or Temp/Active Power sensor, this value represents the current temperature in Celsius."
::= { digital-sen2 1 }

digital-sen2-2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature, Temp/Humidity, Temp/Analog, or Temp/Active Power sensor, this value represents the current temperature in Fahrenheit."
::= { digital-sen2 2 }

digital-sen2-3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog sensor, this value represents the current Voltage reading. If this is a Temp/Active Power sensor, this value represents the current power state (1=Power Detected, 0=No Power Detected)."
::= { digital-sen2 3 }

digital-sen2-4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current custom reading."
::= { digital-sen2 4 }

digital-sen2-5 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
::= { digital-sen2 5 }

digital-sen3-1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature, Temp/Humidity, Temp/Analog, or Temp/Active Power sensor, this value represents the current temperature in Celsius."
::= { digital-sen3 1 }

digital-sen3-2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature, Temp/Humidity, Temp/Analog, or Temp/Active Power sensor, this value represents the current temperature in Fahrenheit."
::= { digital-sen3 2 }

digital-sen3-3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog sensor, this value represents the current Voltage reading. If this is a Temp/Active Power sensor, this value represents the current power state (1=Power Detected, 0=No Power Detected)."
::= { digital-sen3 3 }

digital-sen3-4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current custom reading."
::= { digital-sen3 4 }

digital-sen3-5 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
::= { digital-sen3 5 }

digital-sen4-1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature, Temp/Humidity, Temp/Analog, or Temp/Active Power sensor, this value represents the current temperature in Celsius."
::= { digital-sen4 1 }

digital-sen4-2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature, Temp/Humidity, Temp/Analog, or Temp/Active Power sensor, this value represents the current temperature in Fahrenheit."
::= { digital-sen4 2 }

digital-sen4-3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog sensor, this value represents the current Voltage reading. If this is a Temp/Active Power sensor, this value represents the current power state (1=Power Detected, 0=No Power Detected)."
::= { digital-sen4 3 }

digital-sen4-4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current custom reading."
::= { digital-sen4 4 }

digital-sen4-5 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
::= { digital-sen4 5 }

digital-sen5-1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature, Temp/Humidity, Temp/Analog, or Temp/Active Power sensor, this value represents the current temperature in Celsius."
::= { digital-sen5 1 }

digital-sen5-2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature, Temp/Humidity, Temp/Analog, or Temp/Active Power sensor, this value represents the current temperature in Fahrenheit."
::= { digital-sen5 2 }

digital-sen5-3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog sensor, this value represents the current Voltage reading. If this is a Temp/Active Power sensor, this value represents the current power state (1=Power Detected, 0=No Power Detected)."
::= { digital-sen5 3 }

digital-sen5-4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current custom reading."
::= { digital-sen5 4 }

digital-sen5-5 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
::= { digital-sen5 5 }

digital-sen6-1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature, Temp/Humidity, Temp/Analog, or Temp/Active Power sensor, this value represents the current temperature in Celsius."
::= { digital-sen6 1 }

digital-sen6-2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature, Temp/Humidity, Temp/Analog, or Temp/Active Power sensor, this value represents the current temperature in Fahrenheit."
::= { digital-sen6 2 }

digital-sen6-3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog sensor, this value represents the current Voltage reading. If this is a Temp/Active Power sensor, this value represents the current power state (1=Power Detected, 0=No Power Detected)."
::= { digital-sen6 3 }

digital-sen6-4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current custom reading."
::= { digital-sen6 4 }

digital-sen6-5 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
::= { digital-sen6 5 }

digital-sen7-1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature, Temp/Humidity, Temp/Analog, or Temp/Active Power sensor, this value represents the current temperature in Celsius."
::= { digital-sen7 1 }

digital-sen7-2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature, Temp/Humidity, Temp/Analog, or Temp/Active Power sensor, this value represents the current temperature in Fahrenheit."
::= { digital-sen7 2 }

digital-sen7-3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog sensor, this value represents the current Voltage reading. If this is a Temp/Active Power sensor, this value represents the current power state (1=Power Detected, 0=No Power Detected)."
::= { digital-sen7 3 }

digital-sen7-4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current custom reading."
::= { digital-sen7 4 }

digital-sen7-5 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
::= { digital-sen7 5 }

digital-sen8-1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature, Temp/Humidity, Temp/Analog, or Temp/Active Power sensor, this value represents the current temperature in Celsius."
::= { digital-sen8 1 }

digital-sen8-2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temperature, Temp/Humidity, Temp/Analog, or Temp/Active Power sensor, this value represents the current temperature in Fahrenheit."
::= { digital-sen8 2 }

digital-sen8-3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog sensor, this value represents the current Voltage reading. If this is a Temp/Active Power sensor, this value represents the current power state (1=Power Detected, 0=No Power Detected)."
::= { digital-sen8 3 }

digital-sen8-4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current custom reading."
::= { digital-sen8 4 }

digital-sen8-5 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
::= { digital-sen8 5 }

switch-sen1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for switch sensor 1 (0 = OPEN, 1 = CLOSED)."
::= { switch 1 }

switch-sen2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for switch sensor 2 (0 = OPEN, 1 = CLOSED)."
::= { switch 2 }

switch-sen3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for switch sensor 3 (0 = OPEN, 1 = CLOSED)."
::= { switch 3 }

switch-sen4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for switch sensor 4 (0 = OPEN, 1 = CLOSED)."
::= { switch 4 }

switch-sen5 OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for switch sensor 5 (0 = OPEN, 1 = CLOSED)."
::= { switch 5 }

switch-sen6 OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for switch sensor 6 (0 = OPEN, 1 = CLOSED)."
::= { switch 6 }

switch-sen7 OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for switch sensor 7 (0 = OPEN, 1 = CLOSED)."
::= { switch 7 }

switch-sen8 OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for switch sensor 8 (0 = OPEN, 1 = CLOSED)."
::= { switch 8 }

switch-sen9 OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for switch sensor 9 (0 = OPEN, 1 = CLOSED)."
::= { switch 9 }

switch-sen10 OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for switch sensor 10 (0 = OPEN, 1 = CLOSED)."
::= { switch 10 }

switch-sen11 OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for switch sensor 11 (0 = OPEN, 1 = CLOSED)."
::= { switch 11 }

switch-sen12 OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for switch sensor 12 (0 = OPEN, 1 = CLOSED)."
::= { switch 12 }

switch-sen13 OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for switch sensor 13 (0 = OPEN, 1 = CLOSED)."
::= { switch 13 }

switch-sen14 OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for switch sensor 14 (0 = OPEN, 1 = CLOSED)."
::= { switch 14 }

switch-sen15 OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for switch sensor 15 (0 = OPEN, 1 = CLOSED)."
::= { switch 15 }

switch-sen16 OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for switch sensor 16 (0 = OPEN, 1 = CLOSED)."
::= { switch 16 }

wish-1-enabled OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled."
::= { wish-1 1 }

wish-1-serial-num OBJECT-TYPE
	SYNTAX  	OCTET STRING
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The unique serial number for this WiSH/WiSPR Sensor."
::= { wish-1 2 }

wish-1-updates OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current update interval for this WiSH/WiSPR Sensor."
::= { wish-1 3 }

wish-1-battery-voltage OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current voltage reading of the internal battery for this WiSH/WiSPR Sensor."
::= { wish-1-internal 1 }

wish-1-internal-tempc OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor."
::= { wish-1-internal 2 }

wish-1-internal-tempf OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor."
::= { wish-1-internal 3 }

wish-1-external-1-type OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor."
::= { wish-1-external-1 1 }

wish-1-external-1-val1 OBJECT-TYPE
    SYNTAX      INTEGER(0..65535)
    ACCESS        read-only
    STATUS        mandatory
    DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Celsius."
::= { wish-1-external-1 2 }

wish-1-external-1-val2 OBJECT-TYPE
    SYNTAX      INTEGER(0..65535)
    ACCESS        read-only
    STATUS        mandatory
    DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Fahrenheit."
::= { wish-1-external-1 3 }

wish-1-external-1-val3 OBJECT-TYPE
    SYNTAX      INTEGER(0..65535)
    ACCESS        read-only
    STATUS        mandatory
    DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog Sensor, this value represents the Voltage reading in Volts."
::= { wish-1-external-1 4 }

wish-1-external-1-val4 OBJECT-TYPE
    SYNTAX      INTEGER(0..65535)
    ACCESS        read-only
    STATUS        mandatory
    DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current Custom Value."
::= { wish-1-external-1 5 }

wish-1-external-1-val5 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
::= { wish-1-external-1 6 }

wish-1-external-2-type OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor."
::= { wish-1-external-2 1 }

wish-1-external-2-val1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Celsius."
::= { wish-1-external-2 2 }

wish-1-external-2-val2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Fahrenheit."
::= { wish-1-external-2 3 }

wish-1-external-2-val3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog Sensor, this value represents the Voltage reading in Volts."
::= { wish-1-external-2 4 }

wish-1-external-2-val4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current Custom Value."
::= { wish-1-external-2 5 }

wish-1-external-2-val5 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
::= { wish-1-external-2 6 }

wish-1-external-switch OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED)."
::= { wish-1-external 3 }

wish-2-enabled OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled."
::= { wish-2 1 }

wish-2-serial-num OBJECT-TYPE
	SYNTAX  	OCTET STRING
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The unique serial number for this WiSH/WiSPR Sensor."
::= { wish-2 2 }

wish-2-updates OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current update interval for this WiSH/WiSPR Sensor."
::= { wish-2 3 }

wish-2-battery-voltage OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current voltage reading of the internal battery for this WiSH/WiSPR Sensor."
::= { wish-2-internal 1 }

wish-2-internal-tempc OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor."
::= { wish-2-internal 2 }

wish-2-internal-tempf OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor."
::= { wish-2-internal 3 }

wish-2-external-1-type OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor."
::= { wish-2-external-1 1 }

wish-2-external-1-val1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Celsius."
::= { wish-2-external-1 2 }

wish-2-external-1-val2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Fahrenheit."
::= { wish-2-external-1 3 }

wish-2-external-1-val3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog Sensor, this value represents the Voltage reading in Volts."
::= { wish-2-external-1 4 }

wish-2-external-1-val4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current Custom Value."
::= { wish-2-external-1 5 }

wish-2-external-1-val5 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
::= { wish-2-external-1 6 }

wish-2-external-2-type OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor."
::= { wish-2-external-2 1 }

wish-2-external-2-val1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Celsius."
::= { wish-2-external-2 2 }

wish-2-external-2-val2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Fahrenheit."
::= { wish-2-external-2 3 }

wish-2-external-2-val3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog Sensor, this value represents the Voltage reading in Volts."
::= { wish-2-external-2 4 }

wish-2-external-2-val4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current Custom Value."
::= { wish-2-external-2 5 }

wish-2-external-2-val5 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
::= { wish-2-external-2 6 }

wish-2-external-switch OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED)."
::= { wish-2-external 3 }

wish-3-enabled OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled."
::= { wish-3 1 }

wish-3-serial-num OBJECT-TYPE
	SYNTAX  	OCTET STRING
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The unique serial number for this WiSH/WiSPR Sensor."
::= { wish-3 2 }

wish-3-updates OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current update interval for this WiSH/WiSPR Sensor."
::= { wish-3 3 }

wish-3-battery-voltage OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current voltage reading of the internal battery for this WiSH/WiSPR Sensor."
::= { wish-3-internal 1 }

wish-3-internal-tempc OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor."
::= { wish-3-internal 2 }

wish-3-internal-tempf OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor."
::= { wish-3-internal 3 }

wish-3-external-1-type OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor."
::= { wish-3-external-1 1 }

wish-3-external-1-val1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Celsius."
::= { wish-3-external-1 2 }

wish-3-external-1-val2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Fahrenheit."
::= { wish-3-external-1 3 }

wish-3-external-1-val3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog Sensor, this value represents the Voltage reading in Volts."
::= { wish-3-external-1 4 }

wish-3-external-1-val4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current Custom Value."
::= { wish-3-external-1 5 }

wish-3-external-1-val5 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
::= { wish-3-external-1 6 }

wish-3-external-2-type OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor."
::= { wish-3-external-2 1 }

wish-3-external-2-val1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Celsius."
::= { wish-3-external-2 2 }

wish-3-external-2-val2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Fahrenheit."
::= { wish-3-external-2 3 }

wish-3-external-2-val3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog Sensor, this value represents the Voltage reading in Volts."
::= { wish-3-external-2 4 }

wish-3-external-2-val4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current Custom Value."
::= { wish-3-external-2 5 }

wish-3-external-2-val5 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
::= { wish-3-external-2 6 }

wish-3-external-switch OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED)."
::= { wish-3-external 3 }

wish-4-enabled OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled."
::= { wish-4 1 }

wish-4-serial-num OBJECT-TYPE
	SYNTAX  	OCTET STRING
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The unique serial number for this WiSH/WiSPR Sensor."
::= { wish-4 2 }

wish-4-updates OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current update interval for this WiSH/WiSPR Sensor."
::= { wish-4 3 }

wish-4-battery-voltage OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current voltage reading of the internal battery for this WiSH/WiSPR Sensor."
::= { wish-4-internal 1 }

wish-4-internal-tempc OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor."
::= { wish-4-internal 2 }

wish-4-internal-tempf OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor."
::= { wish-4-internal 3 }

wish-4-external-1-type OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor."
::= { wish-4-external-1 1 }

wish-4-external-1-val1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Celsius."
::= { wish-4-external-1 2 }

wish-4-external-1-val2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Fahrenheit."
::= { wish-4-external-1 3 }

wish-4-external-1-val3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog Sensor, this value represents the Voltage reading in Volts."
::= { wish-4-external-1 4 }

wish-4-external-1-val4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current Custom Value."
::= { wish-4-external-1 5 }

wish-4-external-1-val5 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
::= { wish-4-external-1 6 }

wish-4-external-2-type OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor."
::= { wish-4-external-2 1 }

wish-4-external-2-val1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Celsius."
::= { wish-4-external-2 2 }

wish-4-external-2-val2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Fahrenheit."
::= { wish-4-external-2 3 }

wish-4-external-2-val3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog Sensor, this value represents the Voltage reading in Volts."
::= { wish-4-external-2 4 }

wish-4-external-2-val4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current Custom Value."
::= { wish-4-external-2 5 }

wish-4-external-2-val5 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
::= { wish-4-external-2 6 }

wish-4-external-switch OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED)."
::= { wish-4-external 3 }

wish-5-enabled OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled."
::= { wish-5 1 }

wish-5-serial-num OBJECT-TYPE
	SYNTAX  	OCTET STRING
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The unique serial number for this WiSH/WiSPR Sensor."
::= { wish-5 2 }

wish-5-updates OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current update interval for this WiSH/WiSPR Sensor."
::= { wish-5 3 }

wish-5-battery-voltage OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current voltage reading of the internal battery for this WiSH/WiSPR Sensor."
::= { wish-5-internal 1 }

wish-5-internal-tempc OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor."
::= { wish-5-internal 2 }

wish-5-internal-tempf OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor."
::= { wish-5-internal 3 }

wish-5-external-1-type OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor."
::= { wish-5-external-1 1 }

wish-5-external-1-val1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Celsius."
::= { wish-5-external-1 2 }

wish-5-external-1-val2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Fahrenheit."
::= { wish-5-external-1 3 }

wish-5-external-1-val3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog Sensor, this value represents the Voltage reading in Volts."
::= { wish-5-external-1 4 }

wish-5-external-1-val4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current Custom Value."
::= { wish-5-external-1 5 }

wish-5-external-1-val5 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
::= { wish-5-external-1 6 }

wish-5-external-2-type OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor."
::= { wish-5-external-2 1 }

wish-5-external-2-val1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Celsius."
::= { wish-5-external-2 2 }

wish-5-external-2-val2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Fahrenheit."
::= { wish-5-external-2 3 }

wish-5-external-2-val3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog Sensor, this value represents the Voltage reading in Volts."
::= { wish-5-external-2 4 }

wish-5-external-2-val4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current Custom Value."
::= { wish-5-external-2 5 }

wish-5-external-2-val5 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
::= { wish-5-external-2 6 }

wish-5-external-switch OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED)."
::= { wish-5-external 3 }

wish-6-enabled OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled."
::= { wish-6 1 }

wish-6-serial-num OBJECT-TYPE
	SYNTAX  	OCTET STRING
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The unique serial number for this WiSH/WiSPR Sensor."
::= { wish-6 2 }

wish-6-updates OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current update interval for this WiSH/WiSPR Sensor."
::= { wish-6 3 }

wish-6-battery-voltage OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current voltage reading of the internal battery for this WiSH/WiSPR Sensor."
::= { wish-6-internal 1 }

wish-6-internal-tempc OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor."
::= { wish-6-internal 2 }

wish-6-internal-tempf OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor."
::= { wish-6-internal 3 }

wish-6-external-1-type OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor."
::= { wish-6-external-1 1 }

wish-6-external-1-val1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Celsius."
::= { wish-6-external-1 2 }

wish-6-external-1-val2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Fahrenheit."
::= { wish-6-external-1 3 }

wish-6-external-1-val3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog Sensor, this value represents the Voltage reading in Volts."
::= { wish-6-external-1 4 }

wish-6-external-1-val4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current Custom Value."
::= { wish-6-external-1 5 }

wish-6-external-1-val5 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
::= { wish-6-external-1 6 }

wish-6-external-2-type OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor."
::= { wish-6-external-2 1 }

wish-6-external-2-val1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Celsius."
::= { wish-6-external-2 2 }

wish-6-external-2-val2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Fahrenheit."
::= { wish-6-external-2 3 }

wish-6-external-2-val3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog Sensor, this value represents the Voltage reading in Volts."
::= { wish-6-external-2 4 }

wish-6-external-2-val4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current Custom Value."
::= { wish-6-external-2 5 }

wish-6-external-2-val5 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
::= { wish-6-external-2 6 }

wish-6-external-switch OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED)."
::= { wish-6-external 3 }

wish-7-enabled OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled."
::= { wish-7 1 }

wish-7-serial-num OBJECT-TYPE
	SYNTAX  	OCTET STRING
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The unique serial number for this WiSH/WiSPR Sensor."
::= { wish-7 2 }

wish-7-updates OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current update interval for this WiSH/WiSPR Sensor."
::= { wish-7 3 }

wish-7-battery-voltage OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current voltage reading of the internal battery for this WiSH/WiSPR Sensor."
::= { wish-7-internal 1 }

wish-7-internal-tempc OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor."
::= { wish-7-internal 2 }

wish-7-internal-tempf OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor."
::= { wish-7-internal 3 }

wish-7-external-1-type OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor."
::= { wish-7-external-1 1 }

wish-7-external-1-val1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Celsius."
::= { wish-7-external-1 2 }

wish-7-external-1-val2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Fahrenheit."
::= { wish-7-external-1 3 }

wish-7-external-1-val3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog Sensor, this value represents the Voltage reading in Volts."
::= { wish-7-external-1 4 }

wish-7-external-1-val4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current Custom Value."
::= { wish-7-external-1 5 }

wish-7-external-1-val5 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
::= { wish-7-external-1 6 }

wish-7-external-2-type OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor."
::= { wish-7-external-2 1 }

wish-7-external-2-val1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Celsius."
::= { wish-7-external-2 2 }

wish-7-external-2-val2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Fahrenheit."
::= { wish-7-external-2 3 }

wish-7-external-2-val3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog Sensor, this value represents the Voltage reading in Volts."
::= { wish-7-external-2 4 }

wish-7-external-2-val4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current Custom Value."
::= { wish-7-external-2 5 }

wish-7-external-2-val5 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
::= { wish-7-external-2 6 }

wish-7-external-switch OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED)."
::= { wish-7-external 3 }

wish-8-enabled OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled."
::= { wish-8 1 }

wish-8-serial-num OBJECT-TYPE
	SYNTAX  	OCTET STRING
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The unique serial number for this WiSH/WiSPR Sensor."
::= { wish-8 2 }

wish-8-updates OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current update interval for this WiSH/WiSPR Sensor."
::= { wish-8 3 }

wish-8-battery-voltage OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current voltage reading of the internal battery for this WiSH/WiSPR Sensor."
::= { wish-8-internal 1 }

wish-8-internal-tempc OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor."
::= { wish-8-internal 2 }

wish-8-internal-tempf OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor."
::= { wish-8-internal 3 }

wish-8-external-1-type OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor."
::= { wish-8-external-1 1 }

wish-8-external-1-val1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Celsius."
::= { wish-8-external-1 2 }

wish-8-external-1-val2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Fahrenheit."
::= { wish-8-external-1 3 }

wish-8-external-1-val3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog Sensor, this value represents the Voltage reading in Volts."
::= { wish-8-external-1 4 }

wish-8-external-1-val4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current Custom Value."
::= { wish-8-external-1 5 }

wish-8-external-1-val5 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
::= { wish-8-external-1 6 }

wish-8-external-2-type OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor."
::= { wish-8-external-2 1 }

wish-8-external-2-val1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Celsius."
::= { wish-8-external-2 2 }

wish-8-external-2-val2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Fahrenheit."
::= { wish-8-external-2 3 }

wish-8-external-2-val3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog Sensor, this value represents the Voltage reading in Volts."
::= { wish-8-external-2 4 }

wish-8-external-2-val4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current Custom Value."
::= { wish-8-external-2 5 }

wish-8-external-2-val5 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
::= { wish-8-external-2 6 }

wish-8-external-switch OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED)."
::= { wish-8-external 3 }

wish-9-enabled OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled."
::= { wish-9 1 }

wish-9-serial-num OBJECT-TYPE
	SYNTAX  	OCTET STRING
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The unique serial number for this WiSH/WiSPR Sensor."
::= { wish-9 2 }

wish-9-updates OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current update interval for this WiSH/WiSPR Sensor."
::= { wish-9 3 }

wish-9-battery-voltage OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current voltage reading of the internal battery for this WiSH/WiSPR Sensor."
::= { wish-9-internal 1 }

wish-9-internal-tempc OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor."
::= { wish-9-internal 2 }

wish-9-internal-tempf OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor."
::= { wish-9-internal 3 }

wish-9-external-1-type OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor."
::= { wish-9-external-1 1 }

wish-9-external-1-val1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Celsius."
::= { wish-9-external-1 2 }

wish-9-external-1-val2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Fahrenheit."
::= { wish-9-external-1 3 }

wish-9-external-1-val3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog Sensor, this value represents the Voltage reading in Volts."
::= { wish-9-external-1 4 }

wish-9-external-1-val4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current Custom Value."
::= { wish-9-external-1 5 }

wish-9-external-1-val5 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
::= { wish-9-external-1 6 }

wish-9-external-2-type OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor."
::= { wish-9-external-2 1 }

wish-9-external-2-val1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Celsius."
::= { wish-9-external-2 2 }

wish-9-external-2-val2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Fahrenheit."
::= { wish-9-external-2 3 }

wish-9-external-2-val3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog Sensor, this value represents the Voltage reading in Volts."
::= { wish-9-external-2 4 }

wish-9-external-2-val4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current Custom Value."
::= { wish-9-external-2 5 }

wish-9-external-2-val5 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
::= { wish-9-external-2 6 }

wish-9-external-switch OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED)."
::= { wish-9-external 3 }

wish-10-enabled OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled."
::= { wish-10 1 }

wish-10-serial-num OBJECT-TYPE
	SYNTAX  	OCTET STRING
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The unique serial number for this WiSH/WiSPR Sensor."
::= { wish-10 2 }

wish-10-updates OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current update interval for this WiSH/WiSPR Sensor."
::= { wish-10 3 }

wish-10-battery-voltage OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current voltage reading of the internal battery for this WiSH/WiSPR Sensor."
::= { wish-10-internal 1 }

wish-10-internal-tempc OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor."
::= { wish-10-internal 2 }

wish-10-internal-tempf OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor."
::= { wish-10-internal 3 }

wish-10-external-1-type OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor."
::= { wish-10-external-1 1 }

wish-10-external-1-val1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Celsius."
::= { wish-10-external-1 2 }

wish-10-external-1-val2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Fahrenheit."
::= { wish-10-external-1 3 }

wish-10-external-1-val3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog Sensor, this value represents the Voltage reading in Volts."
::= { wish-10-external-1 4 }

wish-10-external-1-val4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current Custom Value."
::= { wish-10-external-1 5 }

wish-10-external-1-val5 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
::= { wish-10-external-1 6 }

wish-10-external-2-type OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor."
::= { wish-10-external-2 1 }

wish-10-external-2-val1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Celsius."
::= { wish-10-external-2 2 }

wish-10-external-2-val2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Fahrenheit."
::= { wish-10-external-2 3 }

wish-10-external-2-val3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog Sensor, this value represents the Voltage reading in Volts."
::= { wish-10-external-2 4 }

wish-10-external-2-val4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current Custom Value."
::= { wish-10-external-2 5 }

wish-10-external-2-val5 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius."
::= { wish-10-external-2 6 }

wish-10-external-switch OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED)."
::= { wish-10-external 3 }

alarmmessage OBJECT-TYPE
	SYNTAX  	OCTET STRING
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Last Alarm Message"
::= { traps 1 }


-- Lighttower1

lighttower1-RE OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"The status of the red LED on the Light Tower."
::= { lighttower1 1 }

lighttower1-OR OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"The status of the orange LED on the Light Tower."
::= { lighttower1 2 }

lighttower1-GR OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"The status of the green LED on the Light Tower."
::= { lighttower1 3 }

lighttower1-WH OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"The status of the white LED on the Light Tower."
::= { lighttower1 4 }

lighttower1-BL OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"The status of the blue LED on the Light Tower."
::= { lighttower1 5 }

lighttower1-A1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"The status of the 1st audio alarm on the Light Tower."
::= { lighttower1 6 }

lighttower1-A2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"The status of the 2nd audio alarm on the Light Tower."
::= { lighttower1 7 }

lighttower1-RL OBJECT-TYPE
	SYNTAX		INTEGER(0..1)
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"The status of the LTA's on-board relay output"
::= { lighttower1 8 }


-- Lighttower2

lighttower2-RE OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"The status of the red LED on the Light Tower."
::= { lighttower2 1 }

lighttower2-OR OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"The status of the orange LED on the Light Tower."
::= { lighttower2 2 }

lighttower2-GR OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"The status of the green LED on the Light Tower."
::= { lighttower2 3 }

lighttower2-WH OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"The status of the white LED on the Light Tower."
::= { lighttower2 4 }

lighttower2-BL OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"The status of the blue LED on the Light Tower."
::= { lighttower2 5 }

lighttower2-A1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"The status of the 1st audio alarm on the Light Tower."
::= { lighttower2 6 }

lighttower2-A2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"The status of the 2nd audio alarm on the Light Tower."
::= { lighttower2 7 }

lighttower2-RL OBJECT-TYPE
	SYNTAX		INTEGER(0..1)
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"The status of the LTA's on-board relay output"
::= { lighttower2 8 }


-- ROOMALERT32E TRAPS

tempalarm1-32E TRAP-TYPE
	ENTERPRISE	roomalert32E
	VARIABLES	{ alarmmessage }
	DESCRIPTION	"A tempalarm1 trap signifies that the current
			temperature on external sensor 1 is outside the
			defined high or low threshold."
::= 1

room-alert-32E-snmp-trap TRAP-TYPE
	ENTERPRISE	roomalert32E
	VARIABLES	{ alarmmessage }
	DESCRIPTION	"A room-alert-32E-snmp-trap indicates that an alarm
			condition has occurred on the sensor inidcated
			by the alarmMessage variable."
::= 2

tempalarm2-32E TRAP-TYPE
	ENTERPRISE	roomalert32E
	VARIABLES	{ alarmmessage }
	DESCRIPTION	"A tempalarm2 trap signifies that the current
			temperature on external sensor 2 is outside the
			defined high or low threshold."
::= 3

tempclear2-32E TRAP-TYPE
	ENTERPRISE	roomalert32E
	VARIABLES	{ alarmmessage }
	DESCRIPTION	"A tempclear2 trap signifies that the current
			temperature on external sensor 2 has returned to
			a normal condition and is within the defined
			high or low threshold."
::= 4

tempalarm3-32E TRAP-TYPE
	ENTERPRISE	roomalert32E
	VARIABLES	{ alarmmessage }
	DESCRIPTION	"A tempalarm3 trap signifies that the current
			temperature on external sensor 3 is outside the
			defined high or low threshold."
::= 5

tempclear3-32E TRAP-TYPE
	ENTERPRISE	roomalert32E
	VARIABLES	{ alarmmessage }
	DESCRIPTION	"A tempclear3 trap signifies that the current
			temperature on external sensor 3 has returned to
			a normal condition and is within the defined
			high or low threshold."
::= 6

humidityalarm1-32E TRAP-TYPE
	ENTERPRISE	roomalert32E
	VARIABLES	{ alarmmessage }
	DESCRIPTION	"A humidityalarm1 trap signifies that the current
			humidity on external sensor 1 is outside the
			defined high or low threshold."
::= 7

humidityclear1-32E TRAP-TYPE
	ENTERPRISE	roomalert32E
	VARIABLES	{ alarmmessage }
	DESCRIPTION	"A humidityclear1 trap signifies that the current
			humidity on external sensor 1 has returned to
			a normal condition and is within the defined
			high or low threshold."
::= 8

humidityalarm2-32E TRAP-TYPE
	ENTERPRISE	roomalert32E
	VARIABLES	{ alarmmessage }
	DESCRIPTION	"A humidityalarm2 trap signifies that the current
			humidity on external sensor 2 is outside the
			defined high or low threshold."
::= 9

humidityclear2-32E TRAP-TYPE
	ENTERPRISE	roomalert32E
	VARIABLES	{ alarmmessage }
	DESCRIPTION	"A humidityclear2 trap signifies that the current
			humidity on external sensor 2 has returned to
			a normal condition and is within the defined
			high or low threshold."
::= 10

humidityalarm3-32E TRAP-TYPE
	ENTERPRISE	roomalert32E
	VARIABLES	{ alarmmessage }
	DESCRIPTION	"A humidityalarm3 trap signifies that the current
			humidity on external sensor 3 is outside the
			defined high or low threshold."
::= 11

humidityclear3-32E TRAP-TYPE
	ENTERPRISE	roomalert32E
	VARIABLES	{ alarmmessage }
	DESCRIPTION	"A humidityclear3 trap signifies that the current
			humidity on external sensor 3 has returned to
			a normal condition and is within the defined
			high or low threshold."
::= 12

switchalarm1-32E TRAP-TYPE
	ENTERPRISE	roomalert32E
	VARIABLES	{ alarmmessage }
	DESCRIPTION	"A switchalarm1 trap signifies that switch sensor 1
			is in an alarm state."
::= 13

switchclear1-32E TRAP-TYPE
	ENTERPRISE	roomalert32E
	VARIABLES	{ alarmmessage }
	DESCRIPTION	"A switchclear1 trap signifies that the switch sensor 1
			has returned to a normal state."
::= 14

switchalarm2-32E TRAP-TYPE
	ENTERPRISE	roomalert32E
	VARIABLES	{ alarmmessage }
	DESCRIPTION	"A switchalarm2 trap signifies that switch sensor 2
			is in an alarm state."
::= 15

switchclear2-32E TRAP-TYPE
	ENTERPRISE	roomalert32E
	VARIABLES	{ alarmmessage }
	DESCRIPTION	"A switchclear2 trap signifies that the switch sensor 2
			has returned to a normal state."
::= 16

switchalarm3-32E TRAP-TYPE
	ENTERPRISE	roomalert32E
	VARIABLES	{ alarmmessage }
	DESCRIPTION	"A switchalarm3 trap signifies that switch sensor 3
			is in an alarm state."
::= 17

switchclear3-32E TRAP-TYPE
	ENTERPRISE	roomalert32E
	VARIABLES	{ alarmmessage }
	DESCRIPTION	"A switchclear3 trap signifies that the switch sensor 3
			has returned to a normal state."
::= 18

switchalarm4-32E TRAP-TYPE
	ENTERPRISE	roomalert32E
	VARIABLES	{ alarmmessage }
	DESCRIPTION	"A switchalarm4 trap signifies that switch sensor 4
			is in an alarm state."
::= 19

switchclear4-32E TRAP-TYPE
	ENTERPRISE	roomalert32E
	VARIABLES	{ alarmmessage }
	DESCRIPTION	"A switchclear4 trap signifies that the switch sensor 4
			has returned to a normal state."
::= 20

switchalarm5-32E TRAP-TYPE
	ENTERPRISE	roomalert32E
	VARIABLES	{ alarmmessage }
	DESCRIPTION	"A switchalarm5 trap signifies that switch sensor 5
			is in an alarm state."
::= 21

switchclear5-32E TRAP-TYPE
	ENTERPRISE	roomalert32E
	VARIABLES	{ alarmmessage }
	DESCRIPTION	"A switchclear5 trap signifies that the switch sensor 5
			has returned to a normal state."
::= 22

switchalarm6-32E TRAP-TYPE
	ENTERPRISE	roomalert32E
	VARIABLES	{ alarmmessage }
	DESCRIPTION	"A switchalarm6 trap signifies that switch sensor 6
			is in an alarm state."
::= 23

switchclear6-32E TRAP-TYPE
	ENTERPRISE	roomalert32E
	VARIABLES	{ alarmmessage }
	DESCRIPTION	"A switchclear6 trap signifies that the switch sensor 6
			has returned to a normal state."
::= 24

switchalarm7-32E TRAP-TYPE
	ENTERPRISE	roomalert32E
	VARIABLES	{ alarmmessage }
	DESCRIPTION	"A switchalarm7 trap signifies that switch sensor 7
			is in an alarm state."
::= 25

switchclear7-32E TRAP-TYPE
	ENTERPRISE	roomalert32E
	VARIABLES	{ alarmmessage }
	DESCRIPTION	"A switchclear7 trap signifies that the switch sensor 7
			has returned to a normal state."
::= 26

switchalarm8-32E TRAP-TYPE
	ENTERPRISE	roomalert32E
	VARIABLES	{ alarmmessage }
	DESCRIPTION	"A switchalarm8 trap signifies that switch sensor 8
			is in an alarm state."
::= 27

switchclear8-32E TRAP-TYPE
	ENTERPRISE	roomalert32E
	VARIABLES	{ alarmmessage }
	DESCRIPTION	"A switchclear8 trap signifies that the switch sensor 8
			has returned to a normal state."
::= 28
END