librenms-librenms/mibs/WHISP-APS-MIB

--
-- 		whisp-aps-mib.mib
--		GENERATED FROM ui_db.xml
--
--      *******************************************************************************************************
--		Copyright 2005-2013 (c), Cambium Networks
--      Cambium Networks Confidential Proprietary
--      *******************************************************************************************************
--
--      Canopy Access Point and Backhaul Timing Master specific MIB definitions.
--
--     ********************************************************************************************************

WHISP-APS-MIB   DEFINITIONS ::= BEGIN
IMPORTS
		MODULE-IDENTITY, OBJECT-TYPE, Counter32, Counter64, Gauge32, IpAddress, NOTIFICATION-TYPE, TimeTicks, Unsigned32
				FROM SNMPv2-SMI
		DisplayString, PhysAddress, MacAddress
				FROM SNMPv2-TC
		OBJECT-GROUP
				FROM SNMPv2-CONF
		WhispLUID, WhispMACAddress, EventString
				FROM WHISP-TCV2-MIB
		whispModules, whispBox, whispAps
				FROM WHISP-GLOBAL-REG-MIB
		whispBoxEsn, whispBoxRFPhysicalRadioEntry
				FROM WHISP-BOX-MIBV2-MIB
				;

whispApsMibModule  MODULE-IDENTITY
	LAST-UPDATED	"200304150000Z"
	ORGANIZATION	"Cambium Networks"
	CONTACT-INFO
		"Canopy Technical Support
        email: technical-support@canopywireless.com"
	DESCRIPTION
		"This module contains MIB definitions for APs."
	::= {whispModules 12}

-- -------------------------------------------------------------------------
-- Top Level Registrations

whispApsConfig		OBJECT IDENTIFIER ::= {whispAps 1}
whispApsLink		OBJECT IDENTIFIER ::= {whispAps 2}
whispApsLinkTestConfig		OBJECT IDENTIFIER ::= {whispApsLink 1}
whispApsLinkTestResult		OBJECT IDENTIFIER ::= {whispApsLink 2}
whispApsGPS		OBJECT IDENTIFIER ::= {whispAps 3}
whispApsEvent		OBJECT IDENTIFIER ::= {whispAps 5}
whispApsRegEvent		OBJECT IDENTIFIER ::= {whispApsEvent 1}
whispGPSEvent		OBJECT IDENTIFIER ::= {whispApsEvent 2}
whispApsDfsEvent		OBJECT IDENTIFIER ::= {whispApsEvent 3}
whispApRegulatoryEvent		OBJECT IDENTIFIER ::= {whispApsEvent 4}
whispApRFOverloadEvent		OBJECT IDENTIFIER ::= {whispApsEvent 5}
whispApsGroups		OBJECT IDENTIFIER ::= {whispAps 6}
whispApsStatus		OBJECT IDENTIFIER ::= {whispAps 7}
whispApsDNS		OBJECT IDENTIFIER ::= {whispAps 9}
whispApsControls		OBJECT IDENTIFIER ::= {whispAps 11}
whispApsRFConfig		OBJECT IDENTIFIER ::= {whispAps 10}

-- -------------------------------------------------------------------------


	gpsInput	OBJECT-TYPE
		SYNTAX		INTEGER {
					generateSyncSignal(0),
					syncToReceivedSignalTimingPort(1),
					syncToReceivedSignalPowerPort(2)}
		MAX-ACCESS	read-write
		STATUS		obsolete
		DESCRIPTION		
			"The variable is deprecated.  See gpsInput in whispBoxConfig."
		::={whispApsConfig 1}

	rfFreqCarrier	OBJECT-TYPE
		SYNTAX		INTEGER {
					wired(0)}
		MAX-ACCESS	read-write
		STATUS		deprecated
		DESCRIPTION		
			"The variable is deprecated.  Please see radioFreqCarrier."
		::={whispApsConfig 2}

	apLinkSpeed	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-write
		STATUS		obsolete
		DESCRIPTION		
			"The variable is deprecated."
		::={whispApsConfig 3}

	dwnLnkData	OBJECT-TYPE
		SYNTAX		INTEGER (1..99)
		UNITS		"%"
		MAX-ACCESS	read-write
		STATUS		deprecated
		DESCRIPTION		
			"This attribute is deprecated.  Please see radioDownlinkPercent."
		::={whispApsConfig 4}

	highPriorityUpLnkPct	OBJECT-TYPE
		SYNTAX		INTEGER (0..99)
		UNITS		"%"
		MAX-ACCESS	read-write
		STATUS		obsolete
		DESCRIPTION		
			"Percentage of uplink slots for high priority data."
		::={whispApsConfig 5}

	numUAckSlots	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-write
		STATUS		obsolete
		DESCRIPTION		
			"Total number of upstream ack slots."
		::={whispApsConfig 6}

	uAcksReservHigh	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-write
		STATUS		obsolete
		DESCRIPTION		
			"Total number of upstream high priority ack slots"
		::={whispApsConfig 7}

	numDAckSlots	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-write
		STATUS		obsolete
		DESCRIPTION		
			"Total number of downstream ack slots."
		::={whispApsConfig 8}

	dAcksReservHigh	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-write
		STATUS		obsolete
		DESCRIPTION		
			"Total number of high priority downstream ack slots."
		::={whispApsConfig 9}

	numCtlSlots	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-write
		STATUS		obsolete
		DESCRIPTION		
			"This OID is deprecated, please use numCtlSlotsHW."
		::={whispApsConfig 10}

	numCtlSlotsReserveHigh	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-write
		STATUS		obsolete
		DESCRIPTION		
			"Total number of High priority upstream control (contention) slots."
		::={whispApsConfig 11}

	upLnkDataRate	OBJECT-TYPE
		SYNTAX		INTEGER
		UNITS		"Kilobits/sec"
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Sustained uplink bandwidth cap."
		::={whispApsConfig 12}

	upLnkLimit	OBJECT-TYPE
		SYNTAX		INTEGER
		UNITS		"Kilobits/sec"
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Burst uplink bandwidth cap."
		::={whispApsConfig 13}

	dwnLnkDataRate	OBJECT-TYPE
		SYNTAX		INTEGER
		UNITS		"Kilobits/sec"
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Sustained downlink bandwidth cap."
		::={whispApsConfig 14}

	dwnLnkLimit	OBJECT-TYPE
		SYNTAX		INTEGER
		UNITS		"Kilobits/sec"
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Burst downlink bandwidth cap."
		::={whispApsConfig 15}

	sectorID	OBJECT-TYPE
		SYNTAX		INTEGER (0..15)
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Advertise sector number for an AP.
                            Not supported for PMP450."
		::={whispApsConfig 16}

	maxRange	OBJECT-TYPE
		SYNTAX		INTEGER
		UNITS		"miles"
		MAX-ACCESS	read-write
		STATUS		deprecated
		DESCRIPTION		
			"This attribute is deprecated.  Please see radioMaxRange."
		::={whispApsConfig 17}

	airLinkSecurity	OBJECT-TYPE
		SYNTAX		INTEGER {
					standard(0),
					desEnhanced(1),
					desEnhancedAndAuthentication(2),
					authenticationIfAvailable(3)}
		MAX-ACCESS	read-write
		STATUS		obsolete
		DESCRIPTION		
			"Air Link Security.
            desEnhancedAndAuthentication(2) and authenticationIfAvailable(3)
            are only for APAS."
		::={whispApsConfig 18}

	berMode	OBJECT-TYPE
		SYNTAX		INTEGER {
					berStream(0),
					noBerStream(1)}
		MAX-ACCESS	read-write
		STATUS		obsolete
		DESCRIPTION		
			"AP backgroup BER mode."
		::={whispApsConfig 19}

	asIP1	OBJECT-TYPE
		SYNTAX		IpAddress
		MAX-ACCESS	read-write
		STATUS		obsolete
		DESCRIPTION		
			"Obsoleted. Configure with whispApsDNS.authServer1."
		::={whispApsConfig 20}

	asIP2	OBJECT-TYPE
		SYNTAX		IpAddress
		MAX-ACCESS	read-write
		STATUS		obsolete
		DESCRIPTION		
			"Obsoleted. Configure with whispApsDNS.authServer2."
		::={whispApsConfig 21}

	asIP3	OBJECT-TYPE
		SYNTAX		IpAddress
		MAX-ACCESS	read-write
		STATUS		obsolete
		DESCRIPTION		
			"Obsoleted. Configure with whispApsDNS.authServer3."
		::={whispApsConfig 22}

	lanIpAp	OBJECT-TYPE
		SYNTAX		IpAddress
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"LAN IP."
		::={whispApsConfig 23}

	lanMaskAp	OBJECT-TYPE
		SYNTAX		IpAddress
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"LAN subnet mask."
		::={whispApsConfig 24}

	defaultGwAp	OBJECT-TYPE
		SYNTAX		IpAddress
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Default gateway"
		::={whispApsConfig 25}

	privateIp	OBJECT-TYPE
		SYNTAX		IpAddress
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Private IP."
		::={whispApsConfig 26}

	gpsTrap	OBJECT-TYPE
		SYNTAX		INTEGER {
					gpsTrapDisabled(0),
					gpsTrapEnabled(1)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Variable to enable/disable GPS sync/out-sync traps."
		::={whispApsConfig 27}

	regTrap	OBJECT-TYPE
		SYNTAX		INTEGER {
					regTrapDisabled(0),
					regTrapEnabled(1)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Variable to enable/disable registration complete/lost traps."
		::={whispApsConfig 28}

	txSpreading	OBJECT-TYPE
		SYNTAX		INTEGER {
					txSpreadingDisabled(0),
					txSpreadingEnabled(1)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Variable to enable/disable Transmit Frame Spreading.  This option is for FSK only."
		::={whispApsConfig 29}

	apBeaconInfo	OBJECT-TYPE
		SYNTAX		INTEGER {
					enableApBeaconInfo(0),
					disableApBeaconInfo(1)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Variable to enable/disable displaying AP beacon info through AP eval."
		::={whispApsConfig 30}

	authMode	OBJECT-TYPE
		SYNTAX		INTEGER {
					authenticationDisabled(0),
					authenticationRequiredBam(1),
					authenticationRequiredAP(3),
					authenticationRequiredAAA(4)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Variable to enable/disable authentication. The authentication optional mode
            is for APs only. This variable can only be set when authentication feature
            is enabled.  Setting it to 1 will use a BAM server for authentication of SMs.  Setting
            it to 2 will make use of the Authentication Key on the AP for authenticating SMs.  The
            keys must match on SM and AP in order for the SM to be authenticated in this mode."
		::={whispApsConfig 31}

	authKeyAp	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Authentication key. It should be 32 character long.  Can be used on MultiPoint AP if AP Authentication mode is selected. 
            Otherwise, it is used on Backhauls."
		::={whispApsConfig 32}

	encryptionMode	OBJECT-TYPE
		SYNTAX		INTEGER {
					encryptionDisabled(0),
					encryptionEnabled(1)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Variable to enable/disable encryption."
		::={whispApsConfig 33}

	ntpServerIp	OBJECT-TYPE
		SYNTAX		IpAddress
		MAX-ACCESS	read-write
		STATUS		obsolete
		DESCRIPTION		
			"Obsoleted.  Configure with whispApsDNS.ntpServer1, whispApsDNS.ntpServer2, and whispApsDNS.ntpServer3."
		::={whispApsConfig 34}

	broadcastRetryCount	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Broadcast Repeat Count : Range 0 -- 2. For APs."
		::={whispApsConfig 35}

	encryptDwBroadcast	OBJECT-TYPE
		SYNTAX		INTEGER {
					disable(0),
					enable(1)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"To enable or disable Encrypted Downlink Broadcast. For FSK APs."
		::={whispApsConfig 36}

	updateAppAddress	OBJECT-TYPE
		SYNTAX		IpAddress
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Update Application Address."
		::={whispApsConfig 37}

	dfsConfig	OBJECT-TYPE
		SYNTAX		INTEGER {
					disable(0),
					enable(1)}
		MAX-ACCESS	read-write
		STATUS		obsolete
		DESCRIPTION		
			"To configure proper regions for Dynamic Frequency Shifting. For 5.2/5.4/5.7 GHz radios."
		::={whispApsConfig 38}

	vlanEnable	OBJECT-TYPE
		SYNTAX		INTEGER {
					disable(0),
					enable(1)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"To enable or disable VLAN."
		::={whispApsConfig 39}

	configSource	OBJECT-TYPE
		SYNTAX		INTEGER {
					bam(0),
					sm(1),
					bamsm(2)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"To configure CIR, MIR and VLAN through SM or BAM."
		::={whispApsConfig 40}

	apRateAdapt	OBJECT-TYPE
		SYNTAX		INTEGER {
					onex(0),
					onextwox(1),
					onextwoxthreex(2)}
		MAX-ACCESS	read-write
		STATUS		obsolete
		DESCRIPTION		
			"To enable or disable double rate."
		::={whispApsConfig 41}

	numCtlSlotsHW	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-write
		STATUS		deprecated
		DESCRIPTION		
			"This attribute is deprecated.  Please see radioControlSlots."
		::={whispApsConfig 42}

	displayAPEval	OBJECT-TYPE
		SYNTAX		INTEGER {
					enable(0),
					disable(1)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"If enable, it allows display of AP Eval Data at the SM."
		::={whispApsConfig 43}

	smIsolation	OBJECT-TYPE
		SYNTAX		INTEGER {
					smIsolationDisable(0),
					smIsolationDrop(1),
					smIsolationFwd(2)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"(0) -- Disable SM Isolation.
				            (1) -- Enable SM Isolation by blocking SM destined packets.
				            (2) -- Enable SM Isolation by forwarding SM packets upstream."
		::={whispApsConfig 44}

	ipAccessFilterEnable	OBJECT-TYPE
		SYNTAX		INTEGER {
					disable(0),
					enable(1)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"To enable or disable IP access filtering to Management functions.
            (0) - IP access will be allowed from all addresses.
            (1) - IP access will be controlled using allowedIPAccess1-3 entries."
		::={whispApsConfig 45}

	allowedIPAccess1	OBJECT-TYPE
		SYNTAX		IpAddress
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Allow access to AP Management from this IP.
            0 is default setting to allow from all IPs."
		::={whispApsConfig 46}

	allowedIPAccess2	OBJECT-TYPE
		SYNTAX		IpAddress
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Allow access to AP Management from this IP.
            0 is default setting to allow from all IPs."
		::={whispApsConfig 47}

	allowedIPAccess3	OBJECT-TYPE
		SYNTAX		IpAddress
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Allow access to AP Management from this IP.
            0 is default setting to allow from all IPs."
		::={whispApsConfig 48}

	tslBridging	OBJECT-TYPE
		SYNTAX		INTEGER {
					disable(0),
					enable(1)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"1 = We are performing Translation Bridging 0 = We are not."
		::={whispApsConfig 49}

	untranslatedArp	OBJECT-TYPE
		SYNTAX		INTEGER {
					disable(0),
					enable(1)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"1 = We are sending untranslated ARP response. 0 = We are not."
		::={whispApsConfig 50}

	limitFreqBand900	OBJECT-TYPE
		SYNTAX		INTEGER {
					disable(0),
					enable(1)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"1 = We are limiting the freq band of 900 radios.  0 = We are not."
		::={whispApsConfig 51}

	txPwrLevel	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-write
		STATUS		obsolete
		DESCRIPTION		
			"Deprecated, use 'transmitterOP' instead."
		::={whispApsConfig 52}

	rfFreqCaralt1	OBJECT-TYPE
		SYNTAX		INTEGER {
					none(0)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"First DFS Alternate RF Frequency. (Only available for DFS radios)  Used
            as a backup frequency when Radar is detected on DFS enabled Radios.
            The frequencies are:
                             
            5.4 radios:(5475,5485,5490 OFDM only),5495,5500,5505,5510,5515,5520,5525,
                   5530,5535,5540,5545,5550,5555,5560,5565,5570,5575,5580,5585,5590,5595,
                   5600,5605,5610,5615,5620,5625,5630,5635,5640,5645,5650,5655,5660,5665,
                   5670,5675,5680,5685,5690,5695,5700,5705,(5710,5715 OFDM Only).
    
            (5.7 Platform 10 (SAL) radios with non-connectorized antennas do not support DFS)
    
            5.7 radios:5745,5750,5755,5760,5765,5770,5775,5780,5785,5790,5795,5800,5805.
            5.7 radios with ISM enabled :5735,5740,5745,5750,5755,5760,5765,5770,5775,
                   5780,5785,5790,5795,5800,5805,5810,5815,5820,5825,5830,5835,5840.
            0:  None."
		::={whispApsConfig 53}

	rfFreqCaralt2	OBJECT-TYPE
		SYNTAX		INTEGER {
					none(0)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Second DFS Alternate RF Frequency. (Only available for DFS radios)  Used
            as a backup frequency when Radar is detected on DFS enabled Radios.
            The frequencies are:
                         
            5.4 radios:(5475,5485,5490 OFDM only),5495,5500,5505,5510,5515,5520,5525,
                   5530,5535,5540,5545,5550,5555,5560,5565,5570,5575,5580,5585,5590,5595,
                   5600,5605,5610,5615,5620,5625,5630,5635,5640,5645,5650,5655,5660,5665,
                   5670,5675,5680,5685,5690,5695,5700,5705,(5710,5715 OFDM Only).
    
            (5.7 Platform 10 (SAL) radios with non-connectorized antennas do not support DFS)
    
            5.7 radios:5745,5750,5755,5760,5765,5770,5775,5780,5785,5790,5795,5800,5805.
            5.7 radios with ISM enabled :5735,5740,5745,5750,5755,5760,5765,5770,5775,
                   5780,5785,5790,5795,5800,5805,5810,5815,5820,5825,5830,5835,5840.
            0:  None."
		::={whispApsConfig 54}

	scheduleWhitening	OBJECT-TYPE
		SYNTAX		INTEGER {
					disable(0),
					enable(1)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"1 = Schedule Whitening allowed.  0 = Schedule Whitening not allowed.  This option is for FSK only"
		::={whispApsConfig 55}

	remoteSpectrumAnalysisDuration	OBJECT-TYPE
		SYNTAX		INTEGER (10..1000)
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Value in seconds for a remote spectrum analysis on an SM. Range is 10-1000 seconds."
		::={whispApsConfig 56}

-- Perform Remote Spectrum Analysis on an LUID

	remoteSpectrumAnalyzerLUID	OBJECT-TYPE
		SYNTAX		INTEGER (0..255)
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Get will return always return 0.
                            Set will start Remote Spectrum Analyzer on specified LUID.
                            *Warning* This will cause the SM to disconnect from the AP!  
                            You will lose the session for the specified duration!
                            If general error was returned then the LUID does not have an active session, or the
                            SM does not support Remote Spectrum Analysis."
		::={whispApsConfig 57}

-- Allows BHS re-registration every 24 hours

	bhReReg	OBJECT-TYPE
		SYNTAX		INTEGER {
					disabled(0),
					enabled(1)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Allows BHS re-registration every 24 hours. Enable allows re-registration and Disable does not. 24 Hour Encryption Refresh."
		::={whispApsConfig 58}

	dlnkBcastCIR	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Downlink Broadcast CIR (kbps)"
		::={whispApsConfig 59}

	verifyGPSChecksum	OBJECT-TYPE
		SYNTAX		INTEGER {
					doNotVerifyGPSMessageChecksum(0),
					verifyGPSMessageChecksum(1)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Enable/Disable verification of GPS message checksums."
		::={whispApsConfig 60}

	apVlanOverride	OBJECT-TYPE
		SYNTAX		INTEGER {
					disable(0),
					enable(1)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Setting this option will cause an AP to retain its VLAN settings when turning it into an SM.  It will be mostly helpful for 
                       		running spectrum analysis on the AP.  Since doing that requires the AP to be turned into an SM, enabling this option will 
                       		allow you to keep the AP's VLAN configuration in place while the AP is running as an SM."
		::={whispApsConfig 61}

	dhcpRelayAgentEnable	OBJECT-TYPE
		SYNTAX		INTEGER {
					disable(0),
					fullRelay(1),
					option82Only(2)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Enable or Disable MultiPoint AP acting as DHCP Relay Agent for all SMs and Clients underneath it.
            (0) - Relay Agent disabled - SM/CPE devices will perform DHCP normally
            (1) - Relay Agent enabled - AP will intercept DHCP DISCOVER message from SM and CPE, insert Option 82 containing SM's MAC address, and forward request to specified DHCP server."
		::={whispApsConfig 62}

	dhcpRelayAgentSrvrIP	OBJECT-TYPE
		SYNTAX		IpAddress
		MAX-ACCESS	read-write
		STATUS		obsolete
		DESCRIPTION		
			"Obsoleted.  Configure with whispApsDNS.dhcprServer."
		::={whispApsConfig 63}

	colorCodeRescanTimer	OBJECT-TYPE
		SYNTAX		INTEGER (0..43200)
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Time in minutes for the subscriber to begin the idle timer.  This timer
						will begin as soon as a session is started.  
						This only fires if the device is in session with a non-primary color code.
						A value of zero (0) disables this timer
						(MultiPoint system Only)"
		::={whispApsConfig 64}

	colorCodeRescanIdleTimer	OBJECT-TYPE
		SYNTAX		INTEGER (0..60)
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Time in minutes for the subscriber to check for an idle state.  If an period has pass where no unicast RF traffic has occured (idle),
                        then the subscriber will begin to rescan.    
                        This timer will wait until the timer set in colorCodeRescanTimer has expired before beginning. 
                        This timer only fires if the device is in session with a non-primary color code.
                        A value of zero (0) mean to rescan without waiting for idle. 
                        (MultiPoint system Only)"
		::={whispApsConfig 65}

	authKeyOptionAP	OBJECT-TYPE
		SYNTAX		INTEGER {
					useDefault(0),
					useKeySet(1)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"This option is for Multipoint APs only.  This option will only be used if Authentication Mode is set
            to AP Pre-Shared Key.
            0 - Use default key.
            1 - Use set key."
		::={whispApsConfig 66}

	asIP4	OBJECT-TYPE
		SYNTAX		IpAddress
		MAX-ACCESS	read-write
		STATUS		obsolete
		DESCRIPTION		
			"Obsoleted. Configure with whispApsDNS.authServer4."
		::={whispApsConfig 67}

	asIP5	OBJECT-TYPE
		SYNTAX		IpAddress
		MAX-ACCESS	read-write
		STATUS		obsolete
		DESCRIPTION		
			"Obsoleted. Configure with whispApsDNS.authServer5."
		::={whispApsConfig 68}

	onlyAllowVer95OrAbove	OBJECT-TYPE
		SYNTAX		INTEGER {
					onlyAllowVer95OrAboveDisabled(0),
					onlyAllowVer95OrAboveEnabled(1)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Only allow subscribers that are running version 9.5 or above.  Any radio that has a version below 9.5 will not be
                        allowed to register."
		::={whispApsConfig 69}

	apRxDelay	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"This is used for engineering debug and needs to be removed or moved to eng MIB before releasing the MIB."
		::={whispApsConfig 70}

	qinqEthType	OBJECT-TYPE
		SYNTAX		INTEGER {
					x88a8(0),
					x8100(1),
					x9100(2),
					x9200(3),
					x9300(4)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"EtherType for QinQ (802.1ad) outer tag (S-Tag). 0x88a8 by default."
		::={whispApsConfig 71}

	fskSMTxPwrCntl	OBJECT-TYPE
		SYNTAX		INTEGER {
					disabled(0),
					enabled(1)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Enable/Disable AP control of SM TX power.  For FSK AP radios capable of Transmit Power
                            Control."
		::={whispApsConfig 72}

	fskSMRcvTargetLvl	OBJECT-TYPE
		SYNTAX		INTEGER (-80..-40)
		UNITS		"dBm"
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Desired SM Receive Level at AP (dBm, Range -40dBm to -80 dBm)."
		::={whispApsConfig 73}

	authSharedSecret1	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Authentication Server 1 Shared Secret."
		::={whispApsConfig 74}

	authSharedSecret2	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Authentication Server 2 Shared Secret."
		::={whispApsConfig 75}

	authSharedSecret3	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Authentication Server 3 Shared Secret."
		::={whispApsConfig 76}

	whispUsrAuthSharedSecret1	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-write
		STATUS		obsolete
		DESCRIPTION		
			"Obsoleted. Use whispApsConfig.authSharedSecret1."
		::={whispApsConfig 79}

	whispUsrAuthSharedSecret2	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-write
		STATUS		obsolete
		DESCRIPTION		
			"Obsoleted. Use whispApsConfig.authSharedSecret2."
		::={whispApsConfig 80}

	whispUsrAuthSharedSecret3	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-write
		STATUS		obsolete
		DESCRIPTION		
			"Obsoleted. Use whispApsConfig.authSharedSecret3."
		::={whispApsConfig 81}

	whispUsrAcctSvr1	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-write
		STATUS		obsolete
		DESCRIPTION		
			"Obsoleted.  Use whispApsDNS.authServer1."
		::={whispApsConfig 82}

	whispUsrAcctSvr2	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-write
		STATUS		obsolete
		DESCRIPTION		
			"Obsoleted.  Use whispApsDNS.authServer2."
		::={whispApsConfig 83}

	whispUsrAcctSvr3	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-write
		STATUS		obsolete
		DESCRIPTION		
			"Obsoleted.  Use whispApsDNS.authServer3."
		::={whispApsConfig 84}

	whispUsrAuthPhase1	OBJECT-TYPE
		SYNTAX		INTEGER {
					md5(0)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Select method for User Authentication"
		::={whispApsConfig 85}

	whispWebUseAuthServer	OBJECT-TYPE
		SYNTAX		INTEGER {
					useRADIUSAccountingSvr(0),
					useRADIUSAuthenticationSvr(1)}
		MAX-ACCESS	read-write
		STATUS		obsolete
		DESCRIPTION		
			"Obsoleted.  Use whispApsDNS.authServer[1-3]."
		::={whispApsConfig 86}

	dropSession	OBJECT-TYPE
		SYNTAX		MacAddress
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"SM/BHS MAC Address to drop session from the AP/BHM."
		::={whispApsConfig 87}

	uGPSPower	OBJECT-TYPE
		SYNTAX		INTEGER {
					off(0),
					on(1)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Enable or Disable power supply to Universal GPS module (UGPS capable APs only, when GPS_output_enable is NOT set)."
		::={whispApsConfig 88}

	timeZone	OBJECT-TYPE
		SYNTAX		INTEGER (0..124)
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Set the timezone offset for the radio.  This change takes affect dynamically.
            The available timezones are:
             0 : (UTC) UTC - Coordinated Universal Time
             1 : (UTC) GMT - Greenwich Mean Time
             2 : (UTC) WET - Western European Time
             3 : (UTC-12) BIT - Baker Island Time
             4 : (UTC-11) SST - Samoa Standard Time
             5 : (UTC-10) CKT - Cook Island Time
             6 : (UTC-10) HAST - Hawaii-Aleutian Standard Time
             7 : (UTC-10) HST - Hawaii Standard Time
             8 : (UTC-10) TAHT - Tahiti Time
             9 : (UTC-09:30) MIT - Marquesas Islands Time
             10 : (UTC-09) AKST - Alaska Standard Time
             11 : (UTC-09) GIT - Gambier Island Time
             12 : (UTC-09) HADT - Hawaii-Aleutian Daylight Time
             13 : (UTC-08) AKDT - Alaska Daylight Time
             14 : (UTC-08) CIST - Clipperton Island Standard Time
             15 : (UTC-08) PST - Pacific Standard Time (North America)
             16 : (UTC-07) MST - Mountain Standard Time (North America)
             17 : (UTC-07) PDT - Pacific Daylight Time (North America)
             18 : (UTC-06) CST - Central Standard Time (North America)
             19 : (UTC-06) EAST - Easter Island Standard Time
             20 : (UTC-06) GALT - Galapagos Time
             21 : (UTC-06) MDT - Mountain Daylight Time (North America)
             22 : (UTC-05) CDT - Central Daylight Time (North America)
             23 : (UTC-05) COT - Colombia Time
             24 : (UTC-05) ECT - Ecuador Time
             25 : (UTC-05) EST - Eastern Standard Time (North America)
             26 : (UTC-04:30) VET - Venezuelan Standard Time
             27 : (UTC-04) AST - Atlantic Standard Time
             28 : (UTC-04) BOT - Bolivia Time
             29 : (UTC-04) CLT - Chile Standard Time
             30 : (UTC-04) COST - Colombia Summer Time
             31 : (UTC-04) ECT - Eastern Caribbean Time (does not recognise DST)
             32 : (UTC-04) EDT - Eastern Daylight Time (North America)
             33 : (UTC-04) FKT - Falkland Islands Time
             34 : (UTC-04) GYT - Guyana Time
             35 : (UTC-03:30) NST - Newfoundland Standard Time
             36 : (UTC-03:30) NT - Newfoundland Time
             37 : (UTC-03) ADT - Atlantic Daylight Time
             38 : (UTC-03) ART - Argentina Time
             39 : (UTC-03) BRT - Brasilia Time
             40 : (UTC-03) CLST - Chile Summer Time
             41 : (UTC-03) FKST - Falkland Islands Summer Time
             42 : (UTC-03) GFT - French Guiana Time
             43 : (UTC-03) UYT - Uruguay Standard Time
             44 : (UTC-02:30) NDT - Newfoundland Daylight Time
             45 : (UTC-02) GST - South Georgia and the South Sandwich Islands
             46 : (UTC-02) UYST - Uruguay Summer Time
             47 : (UTC-01) AZOST - Azores Standard Time
             48 : (UTC-01) CVT - Cape Verde Time
             49 : (UTC+01) BST - British Summer Time (British Standard Time from Feb 1968 to Oct 1971)
             50 : (UTC+01) CET - Central European Time
             51 : (UTC+01) DFT - AIX specific equivalent of Central European Time
             52 : (UTC+01) IST - Irish Summer Time
             53 : (UTC+01) WAT - West Africa Time
             54 : (UTC+01) WEDT - Western European Daylight Time
             55 : (UTC+01) WEST - Western European Summer Time
             56 : (UTC+02) CAT - Central Africa Time
             57 : (UTC+02) CEDT - Central European Daylight Time
             58 : (UTC+02) CEST - Central European Summer Time
             59 : (UTC+02) EET - Eastern European Time
             60 : (UTC+02) IST - Israel Standard Time
             61 : (UTC+02) SAST - South African Standard Time
             62 : (UTC+03) AST - Arab Standard Time (Kuwait, Riyadh)
             63 : (UTC+03) AST - Arabic Standard Time (Baghdad)
             64 : (UTC+03) EAT - East Africa Time
             65 : (UTC+03) EEDT - Eastern European Daylight Time
             66 : (UTC+03) EEST - Eastern European Summer Time
             67 : (UTC+03) MSK - Moscow Standard Time
             68 : (UTC+03:30) IRST - Iran Standard Time
             69 : (UTC+04) AMT - Armenia Time
             70 : (UTC+04) AST - Arabian Standard Time (Abu Dhabi, Muscat)
             71 : (UTC+04) AZT - Azerbaijan Time
             72 : (UTC+04) GET - Georgia Standard Time
             73 : (UTC+04) MSD - Moscow Summer Time
             74 : (UTC+04) MUT - Mauritius Time
             75 : (UTC+04) RET - Reunion Time
             76 : (UTC+04) SAMT - Samara Time
             77 : (UTC+04) SCT - Seychelles Time
             78 : (UTC+04:30) AFT - Afghanistan Time
             79 : (UTC+05) AMST - Armenia Summer Time
             80 : (UTC+05) HMT - Heard and McDonald Islands Time
             81 : (UTC+05) PKT - Pakistan Standard Time
             82 : (UTC+05) YEKT - Yekaterinburg Time
             83 : (UTC+05:30) IST - Indian Standard Time
             84 : (UTC+05:30) SLT - Sri Lanka Time
             85 : (UTC+05:45) NPT - Nepal Time
             86 : (UTC+06) BIOT - British Indian Ocean Time
             87 : (UTC+06) BST - Bangladesh Standard Time
             88 : (UTC+06) BTT - Bhutan Time
             89 : (UTC+06) OMST - Omsk Time
             90 : (UTC+06:30) CCT - Cocos Islands Time
             91 : (UTC+06:30) MST - Myanmar Standard Time
             92 : (UTC+07) CXT - Christmas Island Time
             93 : (UTC+07) ICT - Indochina Time
             94 : (UTC+07) KRAT - Krasnoyarsk Time
             95 : (UTC+07) THA - Thailand Standard Time
             96 : (UTC+08) ACT - ASEAN Common Time
             97 : (UTC+08) AWST - Australian Western Standard Time
             98 : (UTC+08) BDT - Brunei Time
             99 : (UTC+08) CST - China Standard Time
             100 : (UTC+08) HKT - Hong Kong Time
             101 : (UTC+08) IRKT - Irkutsk Time
             102 : (UTC+08) MST - Malaysian Standard Time
             103 : (UTC+08) PST - Philippine Standard Time
             104 : (UTC+08) SST - Singapore Standard Time
             105 : (UTC+09) AWDT - Australian Western Daylight Time
             106 : (UTC+09) JST - Japan Standard Time
             107 : (UTC+09) KST - Korea Standard Time
             108 : (UTC+09) YAKT - Yakutsk Time
             109 : (UTC+09:30) ACST - Australian Central Standard Time
             110 : (UTC+10) AEST - Australian Eastern Standard Time
             111 : (UTC+10) ChST - Chamorro Standard Time
             112 : (UTC+10) VLAT - Vladivostok Time
             113 : (UTC+10:30) ACDT - Australian Central Daylight Time
             114 : (UTC+10:30) LHST - Lord Howe Standard Time
             115 : (UTC+11) AEDT - Australian Eastern Daylight Time
             116 : (UTC+11) MAGT - Magadan Time
             117 : (UTC+11) SBT - Solomon Islands Time
             118 : (UTC+11:30) NFT - Norfolk Time[1]
             119 : (UTC+12) FJT - Fiji Time
             120 : (UTC+12) GILT - Gilbert Island Time
             121 : (UTC+12) PETT - Kamchatka Time
             122 : (UTC+12:45) CHAST - Chatham Standard Time
             123 : (UTC+13) PHOT - Phoenix Island Time
             124 : (UTC+14) LINT - Line Islands Time"
		::={whispApsConfig 89}

	ofdmSMRcvTargetLvl	OBJECT-TYPE
		SYNTAX		INTEGER (-80..-40)
		UNITS		"dBm"
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Desired SM Receive Level at AP (dBm, Range -40dBm to -80 dBm). As of release 12.1, on MIMO systems this is a combined power level value."
		::={whispApsConfig 90}

	radiusPort	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Port used to connect to the RADIUS server.  Default is 1812."
		::={whispApsConfig 91}

	radiusAcctPort	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Port used to for RADIUS Accounting.  Default is 1813."
		::={whispApsConfig 92}

	lastSesStatsReset	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Displays the timestamp of last reset of session stats or None otherwise."
		::={whispApsConfig 93}

	resetSesStats	OBJECT-TYPE
		SYNTAX		INTEGER {
					noReset(0),
					reset(1)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Resets the session stats if true."
		::={whispApsConfig 94}

	rfOLTrap	OBJECT-TYPE
		SYNTAX		INTEGER {
					enable(1),
					disable(0)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Enable/Disable SNMP Trap for when RF Overload exceeds configured Threshold level."
		::={whispApsConfig 95}

	rfOLThreshold	OBJECT-TYPE
		SYNTAX		INTEGER (1..100)
		UNITS		"%"
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Percent of packet overload in the RF Downlink where SNMP is generated and sent to Network Manager."
		::={whispApsConfig 96}

	rfOLEnable	OBJECT-TYPE
		SYNTAX		INTEGER {
					enable(1),
					disable(0)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Enable/Disable Throughput RF Overload Monitoring monitoring."
		::={whispApsConfig 97}

	actionListFilename	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Name of the file that contains the Action List for Auto update commands from CNUT"
		::={whispApsConfig 98}

	enableAutoupdate	OBJECT-TYPE
		SYNTAX		INTEGER {
					disable(0),
					enable(1)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Enables/Disables auto-update of the SM's under an AP"
		::={whispApsConfig 99}

	accountingSmReAuthInterval	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Select Interval for Reauthentication of SM"
		::={whispApsConfig 100}

	syslogDomainNameAppend	OBJECT-TYPE
		SYNTAX		INTEGER {
					disableDomain(0),
					appendDomain(1)}
		MAX-ACCESS	read-write
		STATUS		deprecated
		DESCRIPTION		
			"This attribute is deprecated. Use syslogDomainNameAppend in whispBoxAttributesGroup"
		::={whispApsConfig 101}

	syslogServerAddr	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-write
		STATUS		deprecated
		DESCRIPTION		
			"This attribute is deprecated. Use syslogServerAddr in whispBoxAttributesGroup"
		::={whispApsConfig 102}

	syslogServerPort	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"This attribute is deprecated. Use syslogServerPort in whispBoxAttributesGroup"
		::={whispApsConfig 103}

	syslogXmitAP	OBJECT-TYPE
		SYNTAX		INTEGER {
					disable(0),
					enable(1)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Enables/Disables transmission of Syslogs from AP/BHM"
		::={whispApsConfig 104}

	syslogXmitSMs	OBJECT-TYPE
		SYNTAX		INTEGER {
					disable(0),
					enable(1)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Enables/Disables transmission of Syslogs from connected SMs/BHS. This can be over-ridden by the setting on individual SMs/ the BHS."
		::={whispApsConfig 105}

	accountingInterimUpdateInterval	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Select Interval for Interim Updates"
		::={whispApsConfig 106}

	gpsOutputEn	OBJECT-TYPE
		SYNTAX		INTEGER {
					off(0),
					on(1)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Enable or Disable GPS sync output enable."
		::={whispApsConfig 107}

	radioMode	OBJECT-TYPE
		SYNTAX		INTEGER {
					combo(0),
					comboDualChan(1),
					mimoOnly(2),
					fskOnly(3)}
		MAX-ACCESS	read-write
		STATUS		obsolete
		DESCRIPTION		
			"This OID is obsolete."
		::={whispApsConfig 206}

	rfTelnetAccess	OBJECT-TYPE
		SYNTAX		INTEGER {
					disable(0),
					enable(1)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Allows/prohibits uplink Telnet access (SM->AP)."
		::={whispApsConfig 207}

	upLnkMaxBurstDataRate	OBJECT-TYPE
		SYNTAX		INTEGER
		UNITS		"Kilobits/sec"
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Maximum burst uplink rate."
		::={whispApsConfig 208}

	dwnLnkMaxBurstDataRate	OBJECT-TYPE
		SYNTAX		INTEGER
		UNITS		"Kilobits/sec"
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Maximum burst downlink rate."
		::={whispApsConfig 209}

	rfPPPoEPADIForwarding	OBJECT-TYPE
		SYNTAX		INTEGER {
					disable(0),
					enable(1)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Enables/disables forwarding of PPPoE PADI packets from AP to SM."
		::={whispApsConfig 210}

	allowedIPAccessNMLength1	OBJECT-TYPE
		SYNTAX		INTEGER (1..32)
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Length of the network mask to apply to the AllowedIPAddress when assessing if access is allowed"
		::={whispApsConfig 211}

	allowedIPAccessNMLength2	OBJECT-TYPE
		SYNTAX		INTEGER (1..32)
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Length of the network mask to apply to the AllowedIPAddress when assessing if access is allowed"
		::={whispApsConfig 212}

	allowedIPAccessNMLength3	OBJECT-TYPE
		SYNTAX		INTEGER (1..32)
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Length of the network mask to apply to the AllowedIPAddress when assessing if access is allowed"
		::={whispApsConfig 213}

	bridgeFloodUnknownsEnable	OBJECT-TYPE
		SYNTAX		INTEGER {
					disable(0),
					enable(1)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"To enable or disable bridge flooding unknown unicast packets.
				            (0) - Bridge will not forward unknown unicast packets.
				            (1) - Bridge will flood unknown unicast packets."
		::={whispApsConfig 214}

	berModSelect	OBJECT-TYPE
		SYNTAX		INTEGER {
					qpsk(0),
					qam-16(1),
					qam-64(2),
					qam-256(3)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"The modulation the AP generates BER at. 0 for QPSK, 1 for 16-QAM, 2 for 64-QAM, and 3 for 256-QAM."
		::={whispApsConfig 215}

	remoteSpectrumAnalyzerScanBandwidth	OBJECT-TYPE
		SYNTAX		INTEGER {
					bandwidth5MHz(0),
					bandwidth10MHz(1),
					bandwidth20MHz(2)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Scanning Bandwidth used for the Remote Spectrum Analyzer.  Only available on PMP 450."
		::={whispApsConfig 216}

	multicastVCDataRate	OBJECT-TYPE
		SYNTAX		INTEGER {
					disable(0),
					rate1X(4),
					rate2X(5),
					rate4X(7),
					rate6X(8),
					rate8X(9)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"The data rate that is used for the Multicast VC. 8X is for engineering only."
		::={whispApsConfig 217}

	dlnkMcastCIR	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Downlink Multicast CIR (kbps)"
		::={whispApsConfig 218}

	multicastRetryCount	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Multicast Repeat Count : Range 0 - 2. For APs."
		::={whispApsConfig 219}

	apConfigAdjacentChanSupport	OBJECT-TYPE
		SYNTAX		INTEGER {
					disable(0),
					enable(1)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Used to enable or disable adjacent channel support."
		::={whispApsConfig 220}

	whispRegStatus	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		obsolete
		DESCRIPTION		
			"This shows the registration status of a link."
		::={whispApsLink 4}

-- Link test configuration

	linkTestLUID	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"LUID selection for Link Test. Valid range: 2-255"
		::={whispApsLinkTestConfig 1}

	linkTestDuration	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Duration for the Link Test. Valid range: 2-10 seconds"
		::={whispApsLinkTestConfig 2}

-- Link test action

	linkTestAction	OBJECT-TYPE
		SYNTAX		INTEGER {
					stopped(0),
					start(1)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Setting value 1 will initiate link test. Note that trying to set 0 will not stop the test. 
            In fact it will return an error message. The value of 0 just indicates the idle state 
            meaning no test is running or the current test is done.
            That's why the word stopped is used and not the action verb stop."
		::={whispApsLinkTestConfig 3}

	linkTestPktLength	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Packet length for Link Test. Valid range: 64-1714 bytes"
		::={whispApsLinkTestConfig 4}

	linkTestMode	OBJECT-TYPE
		SYNTAX		INTEGER {
					rflinktest(0),
					linktestwithbridging(1),
					linktestwithbridgingandmir(2)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Link Test Mode
                            0 = RF Link Test (traffic doesn't go through bridge, highest throughput)
                            1 = Link Test with Bridging
                            2 = Link Test with Bridging and MIR"
		::={whispApsLinkTestConfig 5}

	linkTestSNRCalculation	OBJECT-TYPE
		SYNTAX		INTEGER {
					enable(1),
					disable(0)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Enable or disable Signal to Noise Ratio (SNR) calculations during a Link Test.
                            Enabling(1) will calulate SNR on all receiving packets.
                            Due to load on CPU, will slightly degrade packet per second capabilities.
                            Only applicable to GenII OFDM products and up."
		::={whispApsLinkTestConfig 6}

	linkTestWithDualPath	OBJECT-TYPE
		SYNTAX		INTEGER {
					lowpriorityvconly(0),
					highandlowpriorityvcs(1)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Link Test with:
                            0 = Low Priority VC only
                            1 = High and Low Priority VCs"
		::={whispApsLinkTestConfig 7}

-- Link test configuration

	linkTestNumPkt	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Number of packets to send. Valid range: 0-64 where 0 will 
            flood the link for the duration of the test."
		::={whispApsLinkTestConfig 8}

-- Link test results

	testLUID	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"LUID number of selected unit."
		::={whispApsLinkTestResult 1}

	linkTestStatus	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Status for Link Test."
		::={whispApsLinkTestResult 2}

	linkTestError	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Error status of Link Test:
            (1) Failed to recieve handshake from remote device
            (2) No session is currently active. Please try again after session established.
            (3) Received a bad transaction ID.  Please try again.
            (4) We werent able to send the test request to the remote device.
            (5) We didnt receive any results from the remote device."
		::={whispApsLinkTestResult 3}

	testDuration	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Duration of link test."
		::={whispApsLinkTestResult 4}

	downLinkRate	OBJECT-TYPE
		SYNTAX		INTEGER
		UNITS		"bps"
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Down Link Rate."
		::={whispApsLinkTestResult 5}

	upLinkRate	OBJECT-TYPE
		SYNTAX		INTEGER
		UNITS		"bps"
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Up Link Rate."
		::={whispApsLinkTestResult 6}

	downLinkEff	OBJECT-TYPE
		SYNTAX		INTEGER
		UNITS		"%"
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Down Link Efficiency."
		::={whispApsLinkTestResult 7}

	maxDwnLinkIndex	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"For link test results, the maximum possible downlink efficiency percentage (always 100%)."
		::={whispApsLinkTestResult 8}

	actDwnLinkIndex	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Actual down link index."
		::={whispApsLinkTestResult 9}

	expDwnFragCount	OBJECT-TYPE
		SYNTAX		Gauge32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Expected Fragment Count."
		::={whispApsLinkTestResult 10}

	actDwnFragCount	OBJECT-TYPE
		SYNTAX		Gauge32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Actual Fragment Count"
		::={whispApsLinkTestResult 11}

	upLinkEff	OBJECT-TYPE
		SYNTAX		INTEGER
		UNITS		"%"
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Up link efficiency."
		::={whispApsLinkTestResult 12}

	expUpFragCount	OBJECT-TYPE
		SYNTAX		Gauge32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Uplink expected Fragment Count."
		::={whispApsLinkTestResult 13}

	actUpFragCount	OBJECT-TYPE
		SYNTAX		Gauge32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Actual uplink Fragment Count."
		::={whispApsLinkTestResult 14}

	maxUpLinkIndex	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"For link test results, the maximum possible uplink efficiency percentage (always 100%)."
		::={whispApsLinkTestResult 15}

	actUpLinkIndex	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Actual Up link index."
		::={whispApsLinkTestResult 16}

	fragments1xDwnLinkVertical	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of fragments received on down link at 1X (QPSK).  
                            For Gen II OFDM and forward.
                            For MIMO this is the vertical path."
		::={whispApsLinkTestResult 17}

	fragments2xDwnLinkVertical	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of fragments received on down link at 2X (16-QAM).  
                            For Gen II OFDM and forward.
                            For MIMO this is the vertical path."
		::={whispApsLinkTestResult 18}

	fragments3xDwnLinkVertical	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of fragments received on down link at 3X (64-QAM).  
                            For Gen II OFDM and forward.
                            For MIMO this is the vertical path."
		::={whispApsLinkTestResult 19}

	fragments4xDwnLinkVertical	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of fragments received on down link at 4X (256-QAM).  
                            For Gen II OFDM and forward.
                            For MIMO this is the vertical path."
		::={whispApsLinkTestResult 20}

	fragments1xUpLinkVertical	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of fragments received on up link at 1X (QPSK).
                            For Gen II OFDM and forward.
                            For MIMO this is the vertical path."
		::={whispApsLinkTestResult 21}

	fragments2xUpLinkVertical	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of fragments received on up link at 2X (16-QAM).
                            For Gen II OFDM and forward.
                            For MIMO this is the vertical path."
		::={whispApsLinkTestResult 22}

	fragments3xUpLinkVertical	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of fragments received on up link at 3X (64-QAM).
                            For Gen II OFDM and forward.
                            For MIMO this is the vertical path."
		::={whispApsLinkTestResult 23}

	fragments4xUpLinkVertical	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of fragments received on up link at 4X (256-QAM).
                            For Gen II OFDM and forward.
                            For MIMO this is the vertical path."
		::={whispApsLinkTestResult 24}

	bitErrorsCorrected1xDwnLinkVertical	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of bit errors corrected on average per fragment on down link at 1X (QPSK).
                            For Gen II OFDM and forward.
                            For MIMO this is the vertical path."
		::={whispApsLinkTestResult 25}

	bitErrorsCorrected2xDwnLinkVertical	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of bit errors corrected on average per fragment on down link at 2X (16-QAM).  
                            For Gen II OFDM and forward.
                            For MIMO this is the vertical path."
		::={whispApsLinkTestResult 26}

	bitErrorsCorrected3xDwnLinkVertical	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of bit errors corrected on average per fragment on down link at 3X (64-QAM).
                            For Gen II OFDM and forward.
                            For MIMO this is the vertical path."
		::={whispApsLinkTestResult 27}

	bitErrorsCorrected4xDwnLinkVertical	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of bit errors corrected on average per fragment on down link at 4X (256-QAM).
                            For Gen II OFDM and forward.
                            For MIMO this is the vertical path."
		::={whispApsLinkTestResult 28}

	bitErrorsCorrected1xUpLinkVertical	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of bit errors corrected on average per fragment on up link at 1X (QPSK).  
                            For Gen II OFDM and forward.
                            For MIMO this is the vertical path."
		::={whispApsLinkTestResult 29}

	bitErrorsCorrected2xUpLinkVertical	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of bit errors corrected on average per fragment on up link at 2X (16-QAM).  
                            For Gen II OFDM and forward.
                            For MIMO this is the vertical path."
		::={whispApsLinkTestResult 30}

	bitErrorsCorrected3xUpLinkVertical	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of bit errors corrected on average per fragment on up link at 3X (64-QAM).  
                            For Gen II OFDM and forward.
                            For MIMO this is the vertical path."
		::={whispApsLinkTestResult 31}

	bitErrorsCorrected4xUpLinkVertical	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of bit errors corrected on average per fragment on up link at 4X (256-QAM).  
                            For Gen II OFDM and forward.
                            For MIMO this is the vertical path."
		::={whispApsLinkTestResult 32}

	signalToNoiseRatioDownLinkVertical	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Estimated Signal to Noise Ratio in dB for the down link.  
                            For Gen II OFDM and forward.
                            For MIMO this is the vertical path."
		::={whispApsLinkTestResult 33}

	signalToNoiseRatioUpLinkVertical	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Estimated Signal to Noise Ratio in dB for the up link.  
                            For Gen II OFDM and forward.
                            For MIMO this is the vertical path."
		::={whispApsLinkTestResult 34}

	fragments1xDwnLinkHorizontal	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of fragments received on down link at 1X (QPSK).  
                            For MIMO only.
                            For MIMO this is the horizontal path."
		::={whispApsLinkTestResult 35}

	fragments2xDwnLinkHorizontal	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of fragments received on down link at 2X (16-QAM).  
                            For MIMO only.
                            For MIMO this is the horizontal path."
		::={whispApsLinkTestResult 36}

	fragments3xDwnLinkHorizontal	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of fragments received on down link at 3X (64-QAM).  
                            For MIMO only.
                            For MIMO this is the horizontal path."
		::={whispApsLinkTestResult 37}

	fragments4xDwnLinkHorizontal	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of fragments received on down link at 4X (256-QAM).  
                            For MIMO only.
                            For MIMO this is the horizontal path."
		::={whispApsLinkTestResult 38}

	fragments1xUpLinkHorizontal	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of fragments received on up link at 1X (QPSK).
                            For MIMO only.
                            For MIMO this is the horizontal path."
		::={whispApsLinkTestResult 39}

	fragments2xUpLinkHorizontal	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of fragments received on up link at 2X (16-QAM).
                            For MIMO only.
                            For MIMO this is the horizontal path."
		::={whispApsLinkTestResult 40}

	fragments3xUpLinkHorizontal	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of fragments received on up link at 3X (64-QAM).
                            For MIMO only.
                            For MIMO this is the horizontal path."
		::={whispApsLinkTestResult 41}

	fragments4xUpLinkHorizontal	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of fragments received on up link at 4X (256-QAM).
                            For MIMO only.
                            For MIMO this is the horizontal path."
		::={whispApsLinkTestResult 42}

	bitErrorsCorrected1xDwnLinkHorizontal	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of bit errors corrected on average per fragment on down link at 1X (QPSK).
                            For MIMO and forward.
                            For MIMO this is the horizontal path."
		::={whispApsLinkTestResult 43}

	bitErrorsCorrected2xDwnLinkHorizontal	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of bit errors corrected on average per fragment on down link at 2X (16-QAM).  
                            For MIMO and forward.
                            For MIMO this is the horizontal path."
		::={whispApsLinkTestResult 44}

	bitErrorsCorrected3xDwnLinkHorizontal	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of bit errors corrected on average per fragment on down link at 3X (64-QAM).
                            For MIMO and forward.
                            For MIMO this is the horizontal path."
		::={whispApsLinkTestResult 45}

	bitErrorsCorrected4xDwnLinkHorizontal	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of bit errors corrected on average per fragment on down link at 4X (256-QAM).
                            For MIMO and forward.
                            For MIMO this is the horizontal path."
		::={whispApsLinkTestResult 46}

	bitErrorsCorrected1xUpLinkHorizontal	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of bit errors corrected on average per fragment on up link at 1X (QPSK).  
                            For MIMO and forward.
                            For MIMO this is the horizontal path."
		::={whispApsLinkTestResult 47}

	bitErrorsCorrected2xUpLinkHorizontal	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of bit errors corrected on average per fragment on up link at 2X (16-QAM).  
                            For MIMO and forward.
                            For MIMO this is the horizontal path."
		::={whispApsLinkTestResult 48}

	bitErrorsCorrected3xUpLinkHorizontal	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Engineering use only.
                            Number of bit errors corrected on average per fragment on up link at 3X (64-QAM).  
                            For MIMO and forward.
                            For MIMO this is the horizontal path."
		::={whispApsLinkTestResult 49}

	bitErrorsCorrected4xUpLinkHorizontal	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of bit errors corrected on average per fragment on up link at 4X (256-QAM).  
                            For MIMO and forward.
                            For MIMO this is the horizontal path."
		::={whispApsLinkTestResult 50}

	signalToNoiseRatioDownLinkHorizontal	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Estimated Signal to Noise Ratio in dB for the down link.  
                            For MIMO and forward.
                            For MIMO this is the horizontal path."
		::={whispApsLinkTestResult 51}

	signalToNoiseRatioUpLinkHorizontal	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Estimated Signal to Noise Ratio in dB for the up link.  
                            For Gen II OFDM and forward.
                            For MIMO this is the horizontal path."
		::={whispApsLinkTestResult 52}

	whispGPSStats	OBJECT-TYPE
		SYNTAX		INTEGER {
					gpsSynchronized(1),
					gpsLostSync(2),
					generatingSync(3)}
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"This shows whether the AP is synchrinized
                        to the GPS timer."
		::={whispApsGPS 1}

	gpsSyncSource	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Source of GPS Sync Pulse."
		::={whispApsGPS 2}

	gpsSyncStatus	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Current Live value of Sync Status."
		::={whispApsGPS 3}

	gpsTrackingMode	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"GPS tracking mode."
		::={whispApsGPS 4}

	gpsTime	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"GPS time."
		::={whispApsGPS 5}

	gpsDate	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"GPS date."
		::={whispApsGPS 6}

	gpsSatellitesTracked	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Current number of satellites GPS is tracking."
		::={whispApsGPS 7}

	gpsSatellitesVisible	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of satellites the GPS sees"
		::={whispApsGPS 8}

	gpsHeight	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"GPS height."
		::={whispApsGPS 9}

	gpsAntennaConnection	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Antenna Connection status."
		::={whispApsGPS 10}

	gpsLatitude	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"GPS Latitude."
		::={whispApsGPS 11}

	gpsLongitude	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"GPS Longitude."
		::={whispApsGPS 12}

	gpsInvalidMsg	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of invalid messages."
		::={whispApsGPS 13}

	gpsRestartCount	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of GPS unit restarts."
		::={whispApsGPS 14}

	gpsReInitCount	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"GPS ReInit counts.  The number of times we have done a complete re-initialization of the GPS device."
		::={whispApsGPS 15}

	gpsReceiverInfo	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"A textual string contains information on GPS receiver."
		::={whispApsGPS 16}

	gpsFreeRun	OBJECT-TYPE
		SYNTAX		INTEGER {
					disable(0),
					enable(1)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"This variable is deprecated.
                              Setting this value to false will set AutoSync.
                              Setting this value to true will set AutoSync plus Free Run."
		::={whispApsGPS 17}

	autoSyncStatus	OBJECT-TYPE
		SYNTAX		INTEGER {
					noSync(0),
					onBoardGPSSync(1),
					timingPortUGPSSync(2),
					onBoardGPSAndTimingPortUGPSSync(3),
					powrPortSync(4),
					onBoardGPSAndPowrPortSync(5),
					timingPortUGPSAndPowrPortSync(6),
					onBoardGPSAndTimingPortUGPSAndPowrPortSync(7)}
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Current Live value of Sync Status.
						Following values represent what sources have sync.
						(0) No Sync
						(1) On-board GPS Sync
						(2) Timing Port/UGPS Sync
						(3) On-board GPS and Timing Port/UGPS Sync
						(4) Power Port Sync
						(5) On-board GPS and Power Port Sync
						(6) Timing Port/UGPS and Power Port Sync
						(7) On-board GPS, Timing Port/UGPS and Power Port Sync"
		::={whispApsGPS 18}

-- Registration Events

	whispRegComplete	NOTIFICATION-TYPE
		OBJECTS {
					linkLUID,
					linkPhysAddress}
		STATUS		current
		DESCRIPTION		
			"Signals registration complete."
		::={whispApsRegEvent 1}

	whispRegLost	NOTIFICATION-TYPE
		OBJECTS {
					linkLUID,
					linkPhysAddress}
		STATUS		current
		DESCRIPTION		
			"Signals registration lost."
		::={whispApsRegEvent 2}

	whispRegFailure	NOTIFICATION-TYPE
		OBJECTS {
					regFailESN,
					regGrantReason}
		STATUS		current
		DESCRIPTION		
			"Signals a registration failure has occured."
		::={whispApsRegEvent 3}

	whispDefKeyUsed	NOTIFICATION-TYPE
		OBJECTS {
					linkLUID,
					linkPhysAddress}
		STATUS		current
		DESCRIPTION		
			"Signals Default Key used for encryptiont."
		::={whispApsRegEvent 4}

-- GPS Events

	whispGPSInSync	NOTIFICATION-TYPE
		OBJECTS {
					whispGPSStats,
					whispBoxEsn}
		STATUS		current
		DESCRIPTION		
			"Signals a transition from not-synchronized to synchronized."
		::={whispGPSEvent 1}

	whispGPSOutSync	NOTIFICATION-TYPE
		OBJECTS {
					gpsStatus,
					whispBoxEsn}
		STATUS		current
		DESCRIPTION		
			"Signals a transition from synchronized to not-synchronized."
		::={whispGPSEvent 2}

-- DFS events

	whispRadarDetected	NOTIFICATION-TYPE
		OBJECTS {
					dfsStatus,
					whispBoxEsn}
		STATUS		current
		DESCRIPTION		
			"Radar detected transmit stopped."
		::={whispApsDfsEvent 1}

	whispRadarEnd	NOTIFICATION-TYPE
		OBJECTS {
					dfsStatus,
					whispBoxEsn}
		STATUS		current
		DESCRIPTION		
			"Radar ended back to normal transmit."
		::={whispApsDfsEvent 2}

-- Regulatory Failure due to Invalid Channel set for the region.

	regulatoryApCheckInvalidChanFailed	NOTIFICATION-TYPE
		OBJECTS {
					regulatoryStatus,
					whispBoxEsn}
		STATUS		current
		DESCRIPTION		
			"Regulatory Check failed for the unit due to a invalid channel for the configured region. 
                            regulatoryStatus - Text description for the failure.
                            physAddress - the MAC address of the unit."
		::={whispApRegulatoryEvent 1}

-- Regulatory Failure due to no region set

	regulatoryCheckFailedNoRegionAp	NOTIFICATION-TYPE
		OBJECTS {
					whispBoxEsn}
		STATUS		current
		DESCRIPTION		
			"Regulatory Check failed because a valid region has not be configured.
                            physAddress - the MAC address of the unit."
		::={whispApRegulatoryEvent 2}

-- Regulatory Failure due to Invalid Channel Bandwidth set for the region.

	regulatoryApCheckInvalidChBwFailed	NOTIFICATION-TYPE
		OBJECTS {
					regulatoryStatus,
					whispBoxEsn}
		STATUS		current
		DESCRIPTION		
			"Regulatory Check failed due to an invalid channel bandwidth for the configured region. 
                            regulatoryStatus - Text description for the failure.
                            physAddress - the MAC address of the unit."
		::={whispApRegulatoryEvent 3}

-- RF link overload detection in the Downlink Direction.

	rfLinkOverloadCondition	NOTIFICATION-TYPE
		OBJECTS {
					rfOutDiscardRate,
					whispBoxEsn}
		STATUS		current
		DESCRIPTION		
			"AP has exceeded the preset discard percentage in the RF Downlink Direction.
                            rfOutDiscardRate - Current discard Rate.
                            physAddress - the MAC address of the unit."
		::={whispApRFOverloadEvent 1}

	whispLinkTestGroup	OBJECT-GROUP
			OBJECTS {
					linkTestLUID,
					linkTestDuration,
					linkTestAction,
					linkTestPktLength,
					testLUID,
					linkTestStatus,
					linkTestError,
					testDuration,
					downLinkRate,
					upLinkRate,
					downLinkEff,
					maxDwnLinkIndex,
					actDwnLinkIndex,
					expDwnFragCount,
					actDwnFragCount,
					upLinkEff,
					expUpFragCount,
					actUpFragCount,
					maxUpLinkIndex,
					actUpLinkIndex,
					fragments1xDwnLinkVertical,
					fragments2xDwnLinkVertical,
					fragments3xDwnLinkVertical,
					fragments4xDwnLinkVertical,
					fragments1xUpLinkVertical,
					fragments2xUpLinkVertical,
					fragments3xUpLinkVertical,
					fragments4xUpLinkVertical,
					fragments1xDwnLinkHorizontal,
					fragments2xDwnLinkHorizontal,
					fragments3xDwnLinkHorizontal,
					fragments4xDwnLinkHorizontal,
					fragments1xUpLinkHorizontal,
					fragments2xUpLinkHorizontal,
					fragments3xUpLinkHorizontal,
					fragments4xUpLinkHorizontal,
					bitErrorsCorrected1xDwnLinkVertical,
					bitErrorsCorrected2xDwnLinkVertical,
					bitErrorsCorrected3xDwnLinkVertical,
					bitErrorsCorrected4xDwnLinkVertical,
					bitErrorsCorrected1xUpLinkVertical,
					bitErrorsCorrected2xUpLinkVertical,
					bitErrorsCorrected3xUpLinkVertical,
					bitErrorsCorrected4xUpLinkVertical,
					signalToNoiseRatioDownLinkVertical,
					signalToNoiseRatioUpLinkVertical,
					bitErrorsCorrected1xDwnLinkHorizontal,
					bitErrorsCorrected2xDwnLinkHorizontal,
					bitErrorsCorrected3xDwnLinkHorizontal,
					bitErrorsCorrected4xDwnLinkHorizontal,
					bitErrorsCorrected1xUpLinkHorizontal,
					bitErrorsCorrected2xUpLinkHorizontal,
					bitErrorsCorrected3xUpLinkHorizontal,
					bitErrorsCorrected4xUpLinkHorizontal,
					signalToNoiseRatioDownLinkHorizontal,
					signalToNoiseRatioUpLinkHorizontal,
					linkTestSNRCalculation,
					linkTestWithDualPath,
					linkTestMode,
					linkTestNumPkt}
		STATUS		current
		DESCRIPTION
			"WHiSP APs link test group."
		::= {whispApsGroups 1}

	whispApsConfigGroup	OBJECT-GROUP
			OBJECTS {
					gpsInput,
					rfFreqCarrier,
					dwnLnkData,
					highPriorityUpLnkPct,
					numUAckSlots,
					uAcksReservHigh,
					numDAckSlots,
					dAcksReservHigh,
					numCtlSlots,
					numCtlSlotsReserveHigh,
					upLnkMaxBurstDataRate,
					upLnkDataRate,
					upLnkLimit,
					dwnLnkMaxBurstDataRate,
					dwnLnkDataRate,
					dwnLnkLimit,
					sectorID,
					maxRange,
					asIP1,
					asIP2,
					asIP3,
					asIP4,
					asIP5,
					lanIpAp,
					lanMaskAp,
					defaultGwAp,
					privateIp,
					gpsTrap,
					regTrap,
					txSpreading,
					apBeaconInfo,
					authMode,
					authKeyAp,
					authKeyOptionAP,
					encryptionMode,
					ntpServerIp,
					multicastRetryCount,
					encryptDwBroadcast,
					updateAppAddress,
					dfsConfig,
					vlanEnable,
					configSource,
					apRateAdapt,
					numCtlSlotsHW,
					displayAPEval,
					smIsolation,
					bridgeFloodUnknownsEnable,
					ipAccessFilterEnable,
					allowedIPAccess1,
					allowedIPAccess2,
					allowedIPAccess3,
					allowedIPAccessNMLength1,
					allowedIPAccessNMLength2,
					allowedIPAccessNMLength3,
					rfTelnetAccess,
					rfPPPoEPADIForwarding,
					tslBridging,
					untranslatedArp,
					limitFreqBand900,
					txPwrLevel,
					rfFreqCaralt1,
					rfFreqCaralt2,
					scheduleWhitening,
					remoteSpectrumAnalysisDuration,
					remoteSpectrumAnalyzerLUID,
					bhReReg,
					dlnkBcastCIR,
					dlnkMcastCIR,
					verifyGPSChecksum,
					qinqEthType,
					multicastVCDataRate,
					colorCodeRescanTimer,
					colorCodeRescanIdleTimer,
					fskSMTxPwrCntl,
					fskSMRcvTargetLvl,
					berModSelect,
					lastSesStatsReset,
					resetSesStats,
					syslogDomainNameAppend,
					syslogServerAddr,
					syslogServerPort,
					syslogXmitAP,
					syslogXmitSMs,
					uGPSPower,
					gpsOutputEn,
					radioMode,
					authSharedSecret1,
					authSharedSecret2,
					authSharedSecret3,
					radiusPort,
					radiusAcctPort,
					rfOLEnable,
					rfOLTrap,
					rfOLThreshold,
					remoteSpectrumAnalyzerScanBandwidth,
					apConfigAdjacentChanSupport,
					ofdmSMRcvTargetLvl,
					apRxDelay,
					apVlanOverride,
					dhcpRelayAgentEnable,
					dhcpRelayAgentSrvrIP,
					onlyAllowVer95OrAbove,
					whispWebUseAuthServer,
					whispUsrAuthSharedSecret1,
					whispUsrAuthSharedSecret2,
					whispUsrAuthSharedSecret3,
					whispUsrAcctSvr1,
					whispUsrAcctSvr2,
					whispUsrAcctSvr3,
					whispUsrAuthPhase1,
					accountingInterimUpdateInterval,
					accountingSmReAuthInterval,
					dropSession,
					timeZone,
					actionListFilename,
					enableAutoupdate}
		STATUS		current
		DESCRIPTION
			"WHiSP APs configuration group."
		::= {whispApsGroups 2}

	whispApsLinkTableGroup	OBJECT-GROUP
			OBJECTS {
					linkLUID,
					linkDescr,
					linkPhysAddress,
					linkManagementIP,
					linkFragmentsReceived1XVertical,
					linkFragmentsReceived2XVertical,
					linkFragmentsReceived3XVertical,
					linkFragmentsReceived4XVertical,
					signalToNoiseRatioVertical,
					linkFragmentsReceived1XHorizontal,
					linkFragmentsReceived2XHorizontal,
					linkFragmentsReceived3XHorizontal,
					linkFragmentsReceived4XHorizontal,
					signalToNoiseRatioHorizontal,
					linkSignalStrengthRatio,
					linkRadioDbmHorizontal,
					linkRadioDbmVertical,
					maxSMTxPwr,
					productType,
					linkAdaptRateLowPri,
					linkAdaptRateHighPri,
					autoUpdateStatus,
					linkMtu,
					linkSpeed,
					linkOperStatus,
					linkInOctets,
					linkInUcastPkts,
					linkInNUcastPkts,
					linkInDiscards,
					linkInError,
					linkInUnknownProtos,
					linkOutOctets,
					linkOutUcastPkts,
					linkOutNUcastPkts,
					linkOutDiscards,
					linkOutError,
					linkOutQLen,
					linkSessState,
					linkESN,
					linkRSSI,
					linkAveJitter,
					linkLastJitter,
					linkAirDelay,
					linkRegCount,
					linkReRegCount,
					linkTimeOut,
					linkLastRSSI,
					sessionCount,
					softwareVersion,
					softwareBootVersion,
					fpgaVersion,
					linkSiteName,
					avgPowerLevel,
					lastPowerLevel,
					sesDownLinkRate,
					sesDownLinkLimit,
					sesUpLinkRate,
					sesUpLinkLimit,
					adaptRate,
					sesLoUpCIR,
					sesLoDownCIR,
					sesHiUpCIR,
					sesHiDownCIR,
					platformVer,
					smSessionTmr,
					smSessionSeqNumMismatch,
					dataVCNum,
					hiPriQEn,
					dataVCNumHiQ,
					linkInOctetsHiQ,
					linkInUcastPktsHiQ,
					linkInNUcastPktsHiQ,
					linkInDiscardsHiQ,
					linkInErrorHiQ,
					linkInUnknownProtosHiQ,
					linkOutOctetsHiQ,
					linkOutUcastPktsHiQ,
					linkOutNUcastPktsHiQ,
					linkOutDiscardsHiQ,
					linkOutErrorHiQ,
					vcQOverflow,
					vcQOverflowHiQ,
					p7p8HiPriQEn,
					p7p8HiPriQ,
					linkAirDelayns,
					linkQualityAPData,
					radiusReplyMsg,
					radiusFramedIPAddress,
					radiusFramedIPNetmask,
					radiusDefaultGateway}
		STATUS		current
		DESCRIPTION
			"WHiSP APs Link Table group."
		::= {whispApsGroups 3}

	whispApsNotifGroup	NOTIFICATION-GROUP
			NOTIFICATIONS {
					whispRegComplete,
					whispRegLost,
					whispRegFailure,
					whispDefKeyUsed,
					whispGPSInSync,
					whispGPSOutSync,
					whispRadarDetected,
					whispRadarEnd,
					regulatoryApCheckInvalidChanFailed,
					regulatoryCheckFailedNoRegionAp,
					regulatoryApCheckInvalidChBwFailed,
					rfLinkOverloadCondition}
		STATUS		current
		DESCRIPTION
			"WHiSP APs notification group."
		::= {whispApsGroups 4}

	whispApsFailedRegTableGroup	OBJECT-GROUP
			OBJECTS {
					regGrantReason,
					regFailESN,
					regFailTime,
					regFailSeqNum,
					regFailReasonText}
		STATUS		current
		DESCRIPTION
			"WHiSP APs Failed Registration Table group."
		::= {whispApsGroups 5}

-- Access Point status page

	regCount	OBJECT-TYPE
		SYNTAX		Unsigned32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of registered SMs."
		::={whispApsStatus 1}

	gpsStatus	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"GPS status."
		::={whispApsStatus 2}

	radioSlicingAp	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		obsolete
		DESCRIPTION		
			"The variable is deprecated."
		::={whispApsStatus 3}

	radioTxGainAp	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Radio transmit gain setting."
		::={whispApsStatus 4}

	dataSlotDwn	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of data slot down."
		::={whispApsStatus 5}

	dataSlotUp	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of data slot up."
		::={whispApsStatus 6}

	dataSlotUpHi	OBJECT-TYPE
		SYNTAX		Unsigned32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of high priority data slot up."
		::={whispApsStatus 7}

	upLnkAckSlot	OBJECT-TYPE
		SYNTAX		Unsigned32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Uplink ack slots."
		::={whispApsStatus 8}

	upLnkAckSlotHi	OBJECT-TYPE
		SYNTAX		Unsigned32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Hige priority uplink ack slots."
		::={whispApsStatus 9}

	dwnLnkAckSlot	OBJECT-TYPE
		SYNTAX		Unsigned32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Downlink ack slots."
		::={whispApsStatus 10}

	dwnLnkAckSlotHi	OBJECT-TYPE
		SYNTAX		Unsigned32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Hige priority downlink ack slots."
		::={whispApsStatus 11}

	numCtrSlot	OBJECT-TYPE
		SYNTAX		Unsigned32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of control slots."
		::={whispApsStatus 12}

	numCtrSlotHi	OBJECT-TYPE
		SYNTAX		Unsigned32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"High priority control slot."
		::={whispApsStatus 13}

	dfsStatus	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Dynamic frequency shifting status."
		::={whispApsStatus 14}

	dfsStatusPrimary	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Dynamic frequency shifting status for Primary Channel."
		::={whispApsStatus 15}

	dfsStatusAlt1	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Dynamic frequency shifting status for Alternate Channel 1"
		::={whispApsStatus 16}

	dfsStatusAlt2	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Dynamic frequency shifting status for Alternate Channel 2"
		::={whispApsStatus 17}

	maxRegSMCount	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Maximum number of unique Subscriber Modules registered with this AP at once"
		::={whispApsStatus 18}

	systemTime	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Displays the system time of the unit"
		::={whispApsStatus 19}

	lastNTPTime	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Displays the last NTP time acquired by the AP"
		::={whispApsStatus 20}

	regulatoryStatus	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"The current status of the regulatory check on the AP."
		::={whispApsStatus 21}

	dhcpRlyAgntStat-reqRecvd	OBJECT-TYPE
		SYNTAX		Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of DHCP Requests received by the DHCP Relay."
		::={whispApsStatus 22}

	dhcpRlyAgntStat-reqRelayed	OBJECT-TYPE
		SYNTAX		Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of DHCP Requests relayed by the DHCP Relay."
		::={whispApsStatus 23}

	dhcpRlyAgntStat-reqDiscards	OBJECT-TYPE
		SYNTAX		Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of DHCP Requests discarded by the DHCP Relay."
		::={whispApsStatus 24}

	dhcpRlyAgntStat-respRecvd	OBJECT-TYPE
		SYNTAX		Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of DHCP Replies received by the DHCP Relay."
		::={whispApsStatus 25}

	dhcpRlyAgntStat-respRelayed	OBJECT-TYPE
		SYNTAX		Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of DHCP Replies relayed by the DHCP Relay."
		::={whispApsStatus 26}

	dhcpRlyAgntStat-respDiscards	OBJECT-TYPE
		SYNTAX		Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of DHCP Replies discarded by the DHCP Relay."
		::={whispApsStatus 27}

	dhcpRlyAgntStat-untrustedDiscards	OBJECT-TYPE
		SYNTAX		Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of untrusted messages discarded by the DHCP Relay."
		::={whispApsStatus 28}

	dhcpRlyAgntStat-maxHopDiscards	OBJECT-TYPE
		SYNTAX		Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of messages discarded by the DHCP Relay due to exceeded max hop."
		::={whispApsStatus 29}

	dhcpRlyAgntStat-pktTooBig	OBJECT-TYPE
		SYNTAX		Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of messages forwarded without relay information by the DHCP Relay due to relay information exceeding max message size."
		::={whispApsStatus 30}

	dhcpRlyAgntStat-invalidGiaddrDiscards	OBJECT-TYPE
		SYNTAX		Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of messages discarded by the DHCP Relay due to invalid giaddr in packet."
		::={whispApsStatus 31}

	regFailureCount	OBJECT-TYPE
		SYNTAX		Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"The Total number or Registration Grant Failures."
		::={whispApsStatus 32}

	ntpLogSNMP	OBJECT-TYPE
		SYNTAX		EventString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"NTP Log"
		::={whispApsStatus 33}

	uGPSPowerStatus	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Current UGPS Power Status (UGPS capable APs only)."
		::={whispApsStatus 34}

	rfOutDiscardRate	OBJECT-TYPE
		SYNTAX		INTEGER (0..100)
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Percentage of OutDiscards on the RF link (RF Overload %) in the last minute."
		::={whispApsStatus 35}

	autoUpdateGlobalStatus	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Status of the Auto-Update Command"
		::={whispApsStatus 36}

	currentRadioFreqCarrier	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Current Radio Frequency Carrier"
		::={whispApsStatus 37}

	ntpDomainNameAppend	OBJECT-TYPE
		SYNTAX		INTEGER {
					disableDomain(0),
					appendDomain(1)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Select whether to append the configured management domain name to
            the configured trap names.  For example, if dnsMgmtDomainName is
			set to 'example.com', ntpServer is set to 'ntp', and ntpDomainNameAppend
            is set to appendDomain, the ntpServer name used would be 'ntp.example.com'."
		::={whispApsDNS 1}

	ntpServer1	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"NTP Server 1 Address.
            Format is either an IP address or DNS name."
		::={whispApsDNS 2}

	ntpServer2	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"NTP Server 2 Address.
            Format is either an IP address or DNS name."
		::={whispApsDNS 3}

	ntpServer3	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"NTP Server 3 Address.
            Format is either an IP address or DNS name."
		::={whispApsDNS 4}

	dhcprDomainNameAppend	OBJECT-TYPE
		SYNTAX		INTEGER {
					disableDomain(0),
					appendDomain(1)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Select whether to append the configured management domain name to
            the configured trap names.  For example, if dnsMgmtDomainName is
			set to 'example.com', dhcprServer is set to 'dhcpr', and dhcprDomainNameAppend
            is set to appendDomain, the dhcprServer name used would be 'dhcpr.example.com'."
		::={whispApsDNS 5}

	dhcprServer	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"DHCP Server IP which will be used for forwarding DHCP messages 
			by the DHCP Relay Agent in the MultiPoint AP.
              - Format is either an IP address or DNS name.
              - Default is 255.255.255.255 (broadcast)."
		::={whispApsDNS 6}

	authDomainNameAppend	OBJECT-TYPE
		SYNTAX		INTEGER {
					disableDNSDomain(0),
					enableDNSDomain(1)}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Select whether to append the configured management domain name to
            the configured trap names.  For example, if dnsMgmtDomainName is
			set to 'example.com', authServer1 is set to 'auth1', and authDomainNameAppend
            is set to appendDomain, the authServer1 name used would be 'auth1.example.com'."
		::={whispApsDNS 7}

	authServer1	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Authentication Server 1.
            Format is either an IP address or DNS name."
		::={whispApsDNS 8}

	authServer2	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Authentication Server 2.
            Format is either an IP address or DNS name."
		::={whispApsDNS 9}

	authServer3	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Authentication Server 3.
            Format is either an IP address or DNS name."
		::={whispApsDNS 10}

	authServer4	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Authentication Server 4.
            Format is either an IP address or DNS name."
		::={whispApsDNS 11}

	authServer5	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Authentication Server 5.
            Format is either an IP address or DNS name."
		::={whispApsDNS 12}

	acctDomainNameAppend	OBJECT-TYPE
		SYNTAX		INTEGER {
					disableDomain(0),
					appendDomain(1)}
		MAX-ACCESS	read-write
		STATUS		obsolete
		DESCRIPTION		
			"Obsoleted.  Use whispApsDNS.authDomainNameAppend."
		::={whispApsDNS 13}

	clearLinkTableStats	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Setting this to a nonzero value will clear the link table stats."
		::={whispApsControls 1}

	whispApsRFConfigRadios OBJECT-TYPE
		SYNTAX		SEQUENCE OF WhispApsRFConfigRadioEntry
		MAX-ACCESS	not-accessible
		STATUS		current
		DESCRIPTION
			"Radio configuration table."
		::= {whispApsRFConfig 1}

	whispApsRFConfigRadioEntry OBJECT-TYPE
		SYNTAX		WhispApsRFConfigRadioEntry
		MAX-ACCESS	not-accessible
		STATUS		current
		DESCRIPTION
			"Radio configuration entry."
		AUGMENTS		{whispBoxRFPhysicalRadioEntry}
		::= {whispApsRFConfigRadios 1}

		WhispApsRFConfigRadioEntry ::= SEQUENCE{
			radioFreqCarrier		INTEGER,
			radioDownlinkPercent		INTEGER,
			radioMaxRange		INTEGER,
			radioControlSlots		INTEGER,
			radioTransmitOutputPower		INTEGER,
			radioColorCode	INTEGER
			}

	radioFreqCarrier	OBJECT-TYPE
		SYNTAX		INTEGER {
					wired(0)}
		UNITS		"kHz"
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"RF Frequency.  Please see the whispBoxRFPhysicalRadioFrequencies SNMP table for a list of available
            frequencies.
            0:  wired."
		::={whispApsRFConfigRadioEntry 1}

	radioDownlinkPercent	OBJECT-TYPE
		SYNTAX		INTEGER (1..99)
		UNITS		"%"
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"This is the percentage of frame data space allocated for downlink."
		::={whispApsRFConfigRadioEntry 2}

	radioMaxRange	OBJECT-TYPE
		SYNTAX		INTEGER
		UNITS		"miles"
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Access point max range."
		::={whispApsRFConfigRadioEntry 3}

	radioControlSlots	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Total number of control slots for HW Scheduling Point-to-Mulitpoint mode (Not applicable for PtoP radios).
                       For PMP450 the minimum is 1 control slot, others minimum is zero.
                       Maximum control slots is 15."
		::={whispApsRFConfigRadioEntry 4}

	radioTransmitOutputPower	OBJECT-TYPE
		SYNTAX		INTEGER
		UNITS		"dBm"
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Transmitter output power."
		::={whispApsRFConfigRadioEntry 5}

	radioColorCode	OBJECT-TYPE
		SYNTAX		INTEGER (0..254)
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION		
			"Color code."
		::={whispApsRFConfigRadioEntry 6}

	whispLinkTable OBJECT-TYPE
		SYNTAX		SEQUENCE OF WhispLinkEntry
		MAX-ACCESS	not-accessible
		STATUS		current
		DESCRIPTION
			"List of link test results"
		::= {whispAps 4}

	whispLinkEntry OBJECT-TYPE
		SYNTAX		WhispLinkEntry
		MAX-ACCESS	not-accessible
		STATUS		current
		DESCRIPTION
			"List of link test results"
		INDEX		{linkLUID}
		::= {whispLinkTable 1}

		WhispLinkEntry ::= SEQUENCE{
			linkLUID		INTEGER,
			linkDescr		DisplayString,
			linkPhysAddress		PhysAddress,
			linkMtu		INTEGER,
			linkSpeed		Gauge32,
			linkOperStatus		INTEGER,
			linkInOctets		Counter32,
			linkInUcastPkts		Counter32,
			linkInNUcastPkts		Counter32,
			linkInDiscards		Counter32,
			linkInError		Counter32,
			linkInUnknownProtos		Counter32,
			linkOutOctets		Counter32,
			linkOutUcastPkts		Counter32,
			linkOutNUcastPkts		Counter32,
			linkOutDiscards		Counter32,
			linkOutError		Counter32,
			linkOutQLen		Gauge32,
			linkSessState		INTEGER,
			linkESN		PhysAddress,
			linkRSSI		INTEGER,
			linkAveJitter		Gauge32,
			linkLastJitter		Gauge32,
			linkAirDelay		INTEGER,
			linkRegCount		INTEGER,
			linkReRegCount		INTEGER,
			linkTimeOut		INTEGER,
			linkLastRSSI		INTEGER,
			sessionCount		INTEGER,
			softwareVersion		DisplayString,
			softwareBootVersion		DisplayString,
			fpgaVersion		DisplayString,
			linkSiteName		DisplayString,
			avgPowerLevel		DisplayString,
			lastPowerLevel		DisplayString,
			sesDownLinkRate		INTEGER,
			sesDownLinkLimit		INTEGER,
			sesUpLinkRate		INTEGER,
			sesUpLinkLimit		INTEGER,
			adaptRate		DisplayString,
			sesLoUpCIR		INTEGER,
			sesLoDownCIR		INTEGER,
			sesHiUpCIR		INTEGER,
			sesHiDownCIR		INTEGER,
			platformVer		INTEGER,
			smSessionTmr		TimeTicks,
			smSessionSeqNumMismatch		Counter32,
			dataVCNum		INTEGER,
			hiPriQEn		INTEGER,
			dataVCNumHiQ		INTEGER,
			linkInOctetsHiQ		Counter32,
			linkInUcastPktsHiQ		Counter32,
			linkInNUcastPktsHiQ		Counter32,
			linkInDiscardsHiQ		Counter32,
			linkInErrorHiQ		Counter32,
			linkInUnknownProtosHiQ		Counter32,
			linkOutOctetsHiQ		Counter32,
			linkOutUcastPktsHiQ		Counter32,
			linkOutNUcastPktsHiQ		Counter32,
			linkOutDiscardsHiQ		Counter32,
			linkOutErrorHiQ		Counter32,
			vcQOverflow		Counter32,
			vcQOverflowHiQ		Counter32,
			p7p8HiPriQEn		INTEGER,
			p7p8HiPriQ		Counter32,
			linkAirDelayns		INTEGER,
			linkQualityAPData		DisplayString,
			linkManagementIP		IpAddress,
			linkFragmentsReceived1XVertical		Counter32,
			linkFragmentsReceived2XVertical		Counter32,
			linkFragmentsReceived3XVertical		Counter32,
			linkFragmentsReceived4XVertical		Counter32,
			signalToNoiseRatioVertical		INTEGER,
			radiusReplyMsg		DisplayString,
			autoUpdateStatus		INTEGER,
			radiusFramedIPAddress		IpAddress,
			radiusFramedIPNetmask		IpAddress,
			radiusDefaultGateway		IpAddress,
			linkFragmentsReceived1XHorizontal		Counter32,
			linkFragmentsReceived2XHorizontal		Counter32,
			linkFragmentsReceived3XHorizontal		Counter32,
			linkFragmentsReceived4XHorizontal		Counter32,
			signalToNoiseRatioHorizontal		INTEGER,
			linkSignalStrengthRatio		DisplayString,
			linkRadioDbmHorizontal		DisplayString,
			linkRadioDbmVertical		DisplayString,
			maxSMTxPwr		INTEGER,
			productType		INTEGER,
			linkAdaptRateLowPri		INTEGER,
			linkAdaptRateHighPri	INTEGER
			}

	linkLUID	OBJECT-TYPE
		SYNTAX		INTEGER (1..2147483647)
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"LUID number."
		::={whispLinkEntry 1}

	linkDescr	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"A textual string containing information about the
            unit.  This string should include the name of
            the manufacturer, the product name and the version
            of the hardware interface."
		::={whispLinkEntry 2}

	linkPhysAddress	OBJECT-TYPE
		SYNTAX		PhysAddress
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Physical Address of the unit."
		::={whispLinkEntry 3}

	linkMtu	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"The size of the largest datagram which can be
            sent/received on the interface, specified in
            octets.  For interfaces that are used for
            transmitting network datagrams, this is the size
            of the largest network datagram that can be sent
            on the interface."
		::={whispLinkEntry 4}

	linkSpeed	OBJECT-TYPE
		SYNTAX		Gauge32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"An estimate of the interface's current bandwidth
            in bits per second.  For interfaces which do not
            vary in bandwidth or for those where no accurate
            estimation can be made, this object should contain
            the nominal bandwidth."
		::={whispLinkEntry 5}

	linkOperStatus	OBJECT-TYPE
		SYNTAX		INTEGER {
					up(1),
					down(2),
					testing(3)}
		MAX-ACCESS	read-only
		STATUS		obsolete
		DESCRIPTION		
			"This variable is not used."
		::={whispLinkEntry 6}

	linkInOctets	OBJECT-TYPE
		SYNTAX		Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"The total number of octets received on the
            interface, including framing characters."
		::={whispLinkEntry 7}

	linkInUcastPkts	OBJECT-TYPE
		SYNTAX		Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"The number of subnetwork-unicast packets
            delivered to a higher-layer protocol."
		::={whispLinkEntry 8}

	linkInNUcastPkts	OBJECT-TYPE
		SYNTAX		Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"The number of non-unicast (i.e., subnetwork-
            broadcast or subnetwork-multicast) packets
            delivered to a higher-layer protocol."
		::={whispLinkEntry 9}

	linkInDiscards	OBJECT-TYPE
		SYNTAX		Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"The number of inbound packets which were chosen
            to be discarded even though no errors had been
            detected to prevent their being deliverable to a
            higher-layer protocol.  One possible reason for
            discarding such a packet could be to free up
            buffer space."
		::={whispLinkEntry 10}

	linkInError	OBJECT-TYPE
		SYNTAX		Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"The number of inbound packets that contained
            errors preventing them from being deliverable to a
            higher-layer protocol."
		::={whispLinkEntry 11}

	linkInUnknownProtos	OBJECT-TYPE
		SYNTAX		Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"The number of packets received via the interface
            which were discarded because of an unknown or
            unsupported protocol."
		::={whispLinkEntry 12}

	linkOutOctets	OBJECT-TYPE
		SYNTAX		Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"The total number of octets transmitted out of the
            interface, including framing characters."
		::={whispLinkEntry 13}

	linkOutUcastPkts	OBJECT-TYPE
		SYNTAX		Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"The total number of packets that higher-level
            protocols requested be transmitted to a
            subnetwork-unicast address, including those that
            were discarded or not sent."
		::={whispLinkEntry 14}

	linkOutNUcastPkts	OBJECT-TYPE
		SYNTAX		Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"The total number of packets that higher-level
            protocols requested be transmitted to a non-
            unicast (i.e., a subnetwork-broadcast or
            subnetwork-multicast) address, including those
            that were discarded or not sent."
		::={whispLinkEntry 15}

	linkOutDiscards	OBJECT-TYPE
		SYNTAX		Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"The number of outbound packets which were chosen
            to be discarded even though no errors had been
            detected to prevent their being transmitted.  One
            possible reason for discarding such a packet could
            be to free up buffer space."
		::={whispLinkEntry 16}

	linkOutError	OBJECT-TYPE
		SYNTAX		Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"The number of outbound packets that could not be
            transmitted because of errors."
		::={whispLinkEntry 17}

	linkOutQLen	OBJECT-TYPE
		SYNTAX		Gauge32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Number of packets in output packet queue."
		::={whispLinkEntry 18}

	linkSessState	OBJECT-TYPE
		SYNTAX		INTEGER {
					idle(0),
					inSession(1),
					clearing(2),
					reRegDnRst(3),
					authChal(4),
					registering(5),
					notInUse(6)}
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Current operational state of an interface.
            0 = Idle
            1 = In Session
            2 = Clearing
            3 = Re-registration downlink reset
            4 = Authentication Challenge
            5 = Registering
            6 = Not in use"
		::={whispLinkEntry 19}

	linkESN	OBJECT-TYPE
		SYNTAX		PhysAddress
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Link Electronic serial number. It is MAC address."
		::={whispLinkEntry 20}

	linkRSSI	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"The average RSSI reading of all packets received from an SM. Applicable to FSK radios only."
		::={whispLinkEntry 21}

	linkAveJitter	OBJECT-TYPE
		SYNTAX		Gauge32 (0..15)
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"The average Jitter reading of all packets received from an SM.  Applicable to FSK radios only."
		::={whispLinkEntry 22}

	linkLastJitter	OBJECT-TYPE
		SYNTAX		Gauge32 (0..15)
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Last jitter value. Applicable to FSK radios only."
		::={whispLinkEntry 23}

	linkAirDelay	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"The current round trip air delay in bits measured between the AP and SM."
		::={whispLinkEntry 24}

	linkRegCount	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"The number of times an SM has registered to an AP."
		::={whispLinkEntry 25}

	linkReRegCount	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"The number of times an SM has tried to register with the AP while it still has
            an active session with the AP."
		::={whispLinkEntry 26}

	linkTimeOut	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Link time out."
		::={whispLinkEntry 27}

	linkLastRSSI	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"The last RSSI reading of all packets received from an SM. Applicable to FSK radios only."
		::={whispLinkEntry 28}

	sessionCount	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"How many times has this mac been in/out of session."
		::={whispLinkEntry 29}

	softwareVersion	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"The software version of registered SM."
		::={whispLinkEntry 30}

	softwareBootVersion	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"The software boot version of registered SM."
		::={whispLinkEntry 31}

	fpgaVersion	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"The FPGA version of registered SM."
		::={whispLinkEntry 32}

	linkSiteName	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"The site name of the registered SM."
		::={whispLinkEntry 33}

	avgPowerLevel	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"The average power level of registered SM.
                            For systems that support power control, this value can read 'NA' when the AP adjusts the transmit power of a SM
                            until new packets are received from the SM with it transmitting at its new power level.
                            For MIMO this is the combined receive power."
		::={whispLinkEntry 34}

	lastPowerLevel	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"The last power level of registered SM.
                            For MIMO radios this is the combined receive power."
		::={whispLinkEntry 35}

	sesDownLinkRate	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Down link rate."
		::={whispLinkEntry 36}

	sesDownLinkLimit	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Down link limit."
		::={whispLinkEntry 37}

	sesUpLinkRate	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Uplink rate."
		::={whispLinkEntry 38}

	sesUpLinkLimit	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Uplink limit."
		::={whispLinkEntry 39}

	adaptRate	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Adapt rate of registered SM."
		::={whispLinkEntry 40}

	sesLoUpCIR	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Low priority up link CIR."
		::={whispLinkEntry 41}

	sesLoDownCIR	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Low priority down link CIR."
		::={whispLinkEntry 42}

	sesHiUpCIR	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"High priority up link CIR."
		::={whispLinkEntry 43}

	sesHiDownCIR	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"High priority down link CIR."
		::={whispLinkEntry 44}

	platformVer	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Platform Version."
		::={whispLinkEntry 45}

	smSessionTmr	OBJECT-TYPE
		SYNTAX		TimeTicks
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"SM session uptime"
		::={whispLinkEntry 46}

	smSessionSeqNumMismatch	OBJECT-TYPE
		SYNTAX		Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"The count of how many sequence number mismatch between the AP/BHM and the SM/BHS during the authentication
                        challenge and authentication response messages.  This status is only valid in a system where encryption is 
                        enabled and no authentication server is configured."
		::={whispLinkEntry 47}

	dataVCNum	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"The normal priority Data VC number in use for this link."
		::={whispLinkEntry 48}

	hiPriQEn	OBJECT-TYPE
		SYNTAX		INTEGER {
					disabled(0),
					enabled(1)}
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Returns whether High Priority channel is enabled.  On P7/P8 devices will return 0 always.  Use p7p8HiPriQEn OID for P7/P8 radios."
		::={whispLinkEntry 49}

	dataVCNumHiQ	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"The high priority Data VC number in use for this link, if any.  If 0, no High Priority channel is in place."
		::={whispLinkEntry 50}

	linkInOctetsHiQ	OBJECT-TYPE
		SYNTAX		Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"The total number of octets received on High Priority Queue, including framing characters."
		::={whispLinkEntry 51}

	linkInUcastPktsHiQ	OBJECT-TYPE
		SYNTAX		Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"The number of subnetwork-unicast packets on High Priority Queue
            delivered to a higher-layer protocol."
		::={whispLinkEntry 52}

	linkInNUcastPktsHiQ	OBJECT-TYPE
		SYNTAX		Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"The number of non-unicast (i.e., subnetwork-
            broadcast or subnetwork-multicast) packets on High Priority Queue
            delivered to a higher-layer protocol."
		::={whispLinkEntry 53}

	linkInDiscardsHiQ	OBJECT-TYPE
		SYNTAX		Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"The number of inbound packets on High Priority Queue which were chosen
            to be discarded even though no errors had been
            detected to prevent their being deliverable to a
            higher-layer protocol.  One possible reason for
            discarding such a packet could be to free up
            buffer space."
		::={whispLinkEntry 54}

	linkInErrorHiQ	OBJECT-TYPE
		SYNTAX		Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"The number of inbound packets on High Priority Queue that contained
            errors preventing them from being deliverable to a
            higher-layer protocol."
		::={whispLinkEntry 55}

	linkInUnknownProtosHiQ	OBJECT-TYPE
		SYNTAX		Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"The number of packets received on High Priority Queue via the interface
            which were discarded because of an unknown or
            unsupported protocol."
		::={whispLinkEntry 56}

	linkOutOctetsHiQ	OBJECT-TYPE
		SYNTAX		Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"The total number of octets on High Priority Queue transmitted out of the
            interface, including framing characters."
		::={whispLinkEntry 57}

	linkOutUcastPktsHiQ	OBJECT-TYPE
		SYNTAX		Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"The total number of packets on High Priority Queue that higher-level
            protocols requested be transmitted to a
            subnetwork-unicast address, including those that
            were discarded or not sent."
		::={whispLinkEntry 58}

	linkOutNUcastPktsHiQ	OBJECT-TYPE
		SYNTAX		Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"The total number of packets on High Priority Queue that higher-level
            protocols requested be transmitted to a non-
            unicast (i.e., a subnetwork-broadcast or
            subnetwork-multicast) address, including those
            that were discarded or not sent."
		::={whispLinkEntry 59}

	linkOutDiscardsHiQ	OBJECT-TYPE
		SYNTAX		Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"The number of outbound packets on High Priority Queue which were chosen
            to be discarded even though no errors had been
            detected to prevent their being transmitted.  One
            possible reason for discarding such a packet could
            be to free up buffer space."
		::={whispLinkEntry 60}

	linkOutErrorHiQ	OBJECT-TYPE
		SYNTAX		Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"The number of outbound packets on High Priority Queue that could not be
            transmitted because of errors."
		::={whispLinkEntry 61}

	vcQOverflow	OBJECT-TYPE
		SYNTAX		Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"The number of packets dropped due to Queue overflow on VC."
		::={whispLinkEntry 62}

	vcQOverflowHiQ	OBJECT-TYPE
		SYNTAX		Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"The number of packets dropped due to Queue overflow on High Priority VC, if enabled."
		::={whispLinkEntry 63}

	p7p8HiPriQEn	OBJECT-TYPE
		SYNTAX		INTEGER {
					disabled-or-NA(0),
					enabled(1)}
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Returns whether P7/P8 hi priority channel is enabled.  On non-P7/P8 devices will return 0 always."
		::={whispLinkEntry 64}

	p7p8HiPriQ	OBJECT-TYPE
		SYNTAX		Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Hi Priority Queue statistics for P7 or P8 radios, if enabled.  If not enabled, or not a P7 or P8, will return 0."
		::={whispLinkEntry 65}

	linkAirDelayns	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"The current round trip air delay in nanoseconds measured between the AP and SM."
		::={whispLinkEntry 66}

	linkQualityAPData	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"The current link quality of the SM's data from the AP.
                                This is relative to the current modulation rate (1X, 2X, 3X, etc)."
		::={whispLinkEntry 67}

	linkManagementIP	OBJECT-TYPE
		SYNTAX		IpAddress
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Management IP Address of the unit.  0 indicates SM is not publically addressable."
		::={whispLinkEntry 69}

	linkFragmentsReceived1XVertical	OBJECT-TYPE
		SYNTAX		Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Engineering use only.
                            Number of fragments received in 1x (QPSK) modulation.
                            For GenII OFDM and forward.
                            For MIMO this is the vertical path."
		::={whispLinkEntry 70}

	linkFragmentsReceived2XVertical	OBJECT-TYPE
		SYNTAX		Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Engineering use only.
                            Number of fragments received in 2x (16-QAM) modulation.
                            For GenII OFDM and forward.
                            For MIMO this is the vertical path."
		::={whispLinkEntry 71}

	linkFragmentsReceived3XVertical	OBJECT-TYPE
		SYNTAX		Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Engineering use only.
                            Number of fragments received in 3x (64-QAM) modulation.
                            For GenII OFDM and forward.
                            For MIMO this is the vertical path."
		::={whispLinkEntry 72}

	linkFragmentsReceived4XVertical	OBJECT-TYPE
		SYNTAX		Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Engineering use only.
                            Number of fragments received in 4x (256-QAM) modulation.
                            For GenII OFDM and forward.
                            For MIMO this is the vertical path."
		::={whispLinkEntry 73}

	signalToNoiseRatioVertical	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Estimate of the receive signal to noise ratio in dB.
                            For GenII OFDM and forward.
                            For MIMO this is the vertical path."
		::={whispLinkEntry 74}

	radiusReplyMsg	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"The RADIUS Reply-Msg populated for the SM.
                            This is only valid when using a backen AAA server."
		::={whispLinkEntry 75}

	autoUpdateStatus	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"status of the auto update process"
		::={whispLinkEntry 76}

	radiusFramedIPAddress	OBJECT-TYPE
		SYNTAX		IpAddress
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"This Attribute indicates the IP address to be configured for the SM management interface."
		::={whispLinkEntry 77}

	radiusFramedIPNetmask	OBJECT-TYPE
		SYNTAX		IpAddress
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"This Attribute indicates the netmask to be configured for the SM management interface."
		::={whispLinkEntry 78}

	radiusDefaultGateway	OBJECT-TYPE
		SYNTAX		IpAddress
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"This Attribute indicates the default gateway to be configured for the SM management interface."
		::={whispLinkEntry 79}

	linkFragmentsReceived1XHorizontal	OBJECT-TYPE
		SYNTAX		Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Engineering use only.
                            Number of fragments received in 1x (QPSK) modulation.
                            For MIMO only.
                            For MIMO this is the horizontal path."
		::={whispLinkEntry 80}

	linkFragmentsReceived2XHorizontal	OBJECT-TYPE
		SYNTAX		Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Engineering use only.
                            Number of fragments received in 2x (16-QAM) modulation.
                            For MIMO only.
                            For MIMO this is the horizontal path."
		::={whispLinkEntry 81}

	linkFragmentsReceived3XHorizontal	OBJECT-TYPE
		SYNTAX		Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Engineering use only.
                            Number of fragments received in 3x (64-QAM) modulation.
                            For MIMO only.
                            For MIMO this is the horizontal path."
		::={whispLinkEntry 82}

	linkFragmentsReceived4XHorizontal	OBJECT-TYPE
		SYNTAX		Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Engineering use only.
                            Number of fragments received in 4x (256-QAM) modulation.
                            For MIMO only.
                            For MIMO this is the horizontal path."
		::={whispLinkEntry 83}

	signalToNoiseRatioHorizontal	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Estimate of the receive signal to noise ratio in dB.
                            MIMO radios only.
                            For MIMO this is the horizontal path."
		::={whispLinkEntry 84}

	linkSignalStrengthRatio	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Signal Strength Ratio in dB is the power received by the vertical antenna input (dB) - 
                            power received by the horizontal antenna input (dB).
                            MIMO radios only."
		::={whispLinkEntry 86}

	linkRadioDbmHorizontal	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Receive power level of the horizontal antenna in dBm.
                            MIMO radios only."
		::={whispLinkEntry 87}

	linkRadioDbmVertical	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Receive power level of the vertical antenna in dBm.
                            MIMO radios only."
		::={whispLinkEntry 88}

	maxSMTxPwr	OBJECT-TYPE
		SYNTAX		INTEGER
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Returns whether SM is transmitting at its configured max power level."
		::={whispLinkEntry 89}

	productType	OBJECT-TYPE
		SYNTAX		INTEGER {
					unknown(0),
					pmp450MIMOOFDM(1),
					pmp430SISOOFDM(2),
					pmp450SISOOFDM(3)}
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"Returns which type of product the SM is.
                            PMP450 APs only."
		::={whispLinkEntry 90}

	linkAdaptRateLowPri	OBJECT-TYPE
		SYNTAX		INTEGER {
					noSession(0),
					rate1X(1),
					rate2X(2),
					rete3X(3),
					rate4X(4),
					rate6X(6),
					rate8X(8)}
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"The current transmitting rate of the low priority VC.
                            0 : SM is not in session
                            1 : 1X QPSK SISO
                            2 : 2X 16-QAM SISO or QPSK MIMO
                            3 : 3X 64-QAM SISO
                            4 : 4X 256-QAM SISO or 16-QAM MIMO
                            6 : 6X 64-QAM MIMO
                            8 : 8X 256-QAM MIMO"
		::={whispLinkEntry 91}

	linkAdaptRateHighPri	OBJECT-TYPE
		SYNTAX		INTEGER {
					noHighPriorityChannel(-1),
					noSession(0),
					rate1X(1),
					rate2X(2),
					rete3X(3),
					rate4X(4),
					rate6X(6),
					rate8X(8)}
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"The current transmitting rate of the high priority VC.
                            -1 : High Priority Channel not configured
                            0 : SM is not in session
                            1 : 1X QPSK SISO
                            2 : 2X 16-QAM SISO or QPSK MIMO
                            3 : 3X 64-QAM SISO
                            4 : 4X 256-QAM SISO or 16-QAM MIMO
                            6 : 6X 64-QAM MIMO
                            8 : 8X 256-QAM MIMO"
		::={whispLinkEntry 92}

	whispFailedRegTable OBJECT-TYPE
		SYNTAX		SEQUENCE OF WhispFailedRegEntry
		MAX-ACCESS	not-accessible
		STATUS		current
		DESCRIPTION
			"List of link test results"
		::= {whispAps 8}

	whispFailedRegEntry OBJECT-TYPE
		SYNTAX		WhispFailedRegEntry
		MAX-ACCESS	not-accessible
		STATUS		current
		DESCRIPTION
			"List of Failed ESNs"
		INDEX		{regFailSeqNum}
		::= {whispFailedRegTable 1}

		WhispFailedRegEntry ::= SEQUENCE{
			regFailSeqNum		Counter32,
			regFailESN		PhysAddress,
			regGrantReason		INTEGER,
			regFailTime		TimeTicks,
			regFailReasonText	DisplayString
			}

	regGrantReason	OBJECT-TYPE
		SYNTAX		INTEGER {
					reggnt-valid(0),
					reggnt-outofrange(1),
					reggnt-nolUIDS(2),
					reggnt-rerange(3),
					reggnt-authfail(4),
					reggnt-encryptfail(5),
					reggnt-poweradjust(6),
					reggnt-novcs(7),
					reggnt-failvcreserve(8),
					reggnt-failvcactive(9),
					reggnt-failhivcdata(10),
					reggnt-failsmlimit(11),
					reggnt-fail95orabove(12)}
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"The registration failure reason"
		::={whispFailedRegEntry 1}

	regFailESN	OBJECT-TYPE
		SYNTAX		PhysAddress
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"The ESN that failed to register"
		::={whispFailedRegEntry 2}

	regFailTime	OBJECT-TYPE
		SYNTAX		TimeTicks
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"The number of ticks that occurred when the ESN failed to register"
		::={whispFailedRegEntry 3}

	regFailSeqNum	OBJECT-TYPE
		SYNTAX		Counter32
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"The sequence when the register failure was given."
		::={whispFailedRegEntry 4}

	regFailReasonText	OBJECT-TYPE
		SYNTAX		DisplayString
		MAX-ACCESS	read-only
		STATUS		current
		DESCRIPTION		
			"The text description of the failure."
		::={whispFailedRegEntry 5}


END