From 0fde06f8330cccf6963a6faec8756fad4c140dd4 Mon Sep 17 00:00:00 2001 From: Tom Laermans Date: Mon, 15 Feb 2010 14:42:16 +0000 Subject: [PATCH] dupe mib git-svn-id: http://www.observium.org/svn/observer/trunk@857 61d68cd4-352d-0410-923a-c4978735b2b8 --- mibs/junos/BGP4-V2-MIB-JUNIPER.mib | 4226 ---------------------------- 1 file changed, 4226 deletions(-) delete mode 100644 mibs/junos/BGP4-V2-MIB-JUNIPER.mib diff --git a/mibs/junos/BGP4-V2-MIB-JUNIPER.mib b/mibs/junos/BGP4-V2-MIB-JUNIPER.mib deleted file mode 100644 index 283adc9f16..0000000000 --- a/mibs/junos/BGP4-V2-MIB-JUNIPER.mib +++ /dev/null @@ -1,4226 +0,0 @@ --- ***************************************************************************** --- draft-ietf-idr-bgp4-mibv2-03.txt --- --- Copyright (c) 2002 The Internet Society. --- Copyright (c) 2003, 2006, Juniper Networks, Inc. --- All rights reserved. --- --- Juniper Networks edits to this MIB: *** JNX *** --- 09/09/03 Assigned an enterprise experimental OID and added "jnx" prefix. --- Fixed AUGMENTS entry for the bgpM2CfgPeerConfedMemberTable. --- Added bgpM2PeerRoutingInstance to bgpM2PeerTable. --- Added REVISION clause to MODULE-IDENTITY. --- Fixed conformance clauses. --- ***************************************************************************** - -BGP4-V2-MIB-JUNIPER DEFINITIONS ::= BEGIN - - IMPORTS - MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, - Counter32, Gauge32, Unsigned32, Integer32, TimeTicks -- *** JNX *** - FROM SNMPv2-SMI - -- Note that the following reference to INET-ADDRESS-MIB - -- refers to the version as published in the RFC 2851 - -- update internet draft. - InetAddressType, InetAddress, InetPortNumber, - InetAutonomousSystemNumber, InetAddressPrefixLength - FROM INET-ADDRESS-MIB - -- Juniper specific *** JNX *** - jnxBgpM2Experiment -- *** JNX *** - FROM JUNIPER-EXPERIMENT-MIB -- *** JNX *** - TEXTUAL-CONVENTION, TruthValue, RowPointer, StorageType, - RowStatus - FROM SNMPv2-TC - MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP - FROM SNMPv2-CONF - SnmpAdminString - FROM SNMP-FRAMEWORK-MIB; - - jnxBgpM2 MODULE-IDENTITY - LAST-UPDATED "200309091508Z" -- 09-Sep-03 11:08 AM EDT *** JNX *** - ORGANIZATION "IETF IDR Working Group" - CONTACT-INFO "E-mail: idr@merit.net - - Jeffrey Haas (Editor) - 825 Victors Way, Suite 100 - Ann Arbor, MI 48108 - Tel: +1 734 222-1600 - Fax: +1 734 222-1602 - E-mail: jhaas@nexthop.com" - - DESCRIPTION - "This MIB module defines management objects for - the Border Gateway Protocol, Version 4." - REVISION "200309091508Z" -- 09-Sep-03 11:08 AM EDT *** JNX *** - DESCRIPTION -- *** JNX *** - "This is a proprietary implementation of the -- *** JNX *** - draft-ietf-idr-bgp4-mibv2-03.txt MIB as written by -- *** JNX *** - the IETF Inter-Domain Routing Working Group. -- *** JNX *** - This Juniper experimental MIB will be retired when a -- *** JNX *** - valid oid branch is assigned." -- *** JNX *** - REVISION "200211040000Z" -- *** JNX *** - DESCRIPTION -- *** JNX *** - "draft-ietf-idr-bgp4-mibv2-03.txt version written by -- *** JNX *** - the IETF Inter-Domain Routing Working Group." -- *** JNX *** --- ::= { mib-2 XXX } *** JNX *** - ::= { jnxBgpM2Experiment 1 } -- *** JNX *** - - - JnxBgpM2Identifier ::= TEXTUAL-CONVENTION - DISPLAY-HINT "1d." - STATUS current - DESCRIPTION - "The representation of a BGP Identifier. The BGP - Identifier should be represented in the OCTET STRING - as with the first OCTET of the string containing - the first OCTET of the BGP Identifier received or sent - in the OPEN packet and so on. - - Even though the BGP Identifier is trending away from - an IP address it is still displayed as if it was one, - even when it would be an illegal IP address." - SYNTAX OCTET STRING(SIZE (4)) - - - JnxBgpM2Safi ::= TEXTUAL-CONVENTION - DISPLAY-HINT "d" - STATUS current - DESCRIPTION - "The representation of a BGP Safi" - SYNTAX Unsigned32(0..255) - - - JnxBgpM2Community ::= TEXTUAL-CONVENTION - DISPLAY-HINT "2d:" - STATUS current - DESCRIPTION - "The representation of a BGP Community." - SYNTAX OCTET STRING(SIZE(4)) - - - JnxBgpM2ExtendedCommunity ::= TEXTUAL-CONVENTION - DISPLAY-HINT "1x:" - STATUS current - DESCRIPTION - "The representation of a BGP Extended Community." - SYNTAX OCTET STRING(SIZE(8)) - - - jnxBgpM2BaseScalars - OBJECT IDENTIFIER ::= { jnxBgpM2 1 } - - - -- - -- Notifications - -- - - jnxBgpM2BaseNotifications - OBJECT IDENTIFIER ::= { jnxBgpM2BaseScalars 0 } - - - jnxBgpM2Established NOTIFICATION-TYPE - OBJECTS { - jnxBgpM2PeerLocalAddrType, - jnxBgpM2PeerLocalAddr, - jnxBgpM2PeerRemoteAddrType, - jnxBgpM2PeerRemoteAddr, - jnxBgpM2PeerLastErrorReceived, - jnxBgpM2PeerState - } - STATUS current - DESCRIPTION - "The BGP Established event is generated when - the BGP FSM enters the ESTABLISHED state." - ::= { jnxBgpM2BaseNotifications 1 } - - - jnxBgpM2BackwardTransition NOTIFICATION-TYPE - OBJECTS { - jnxBgpM2PeerLocalAddrType, - jnxBgpM2PeerLocalAddr, - jnxBgpM2PeerRemoteAddrType, - jnxBgpM2PeerRemoteAddr, - jnxBgpM2PeerLastErrorReceived, - jnxBgpM2PeerLastErrorReceivedText, - jnxBgpM2PeerState - } - STATUS current - DESCRIPTION - "The BGPBackwardTransition Event is generated - when the BGP FSM moves from a higher numbered - state to a lower numbered state." - ::= { jnxBgpM2BaseNotifications 2 } - - - -- - -- BGP Supported Version Table - -- - jnxBgpM2Version - OBJECT IDENTIFIER ::= { jnxBgpM2BaseScalars 1 } - - - jnxBgpM2VersionTable OBJECT-TYPE - SYNTAX SEQUENCE OF JnxBgpM2VersionEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "Table of supported BGP versions." - ::= { jnxBgpM2Version 1 } - - - jnxBgpM2VersionEntry OBJECT-TYPE - SYNTAX JnxBgpM2VersionEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "Entry containing data on a given supported version - of the Border Gateway Protocol and the level of - support provided. It is expected that any agent - implementation supporting this MIB module will - report support for Version 4 of the Border Gateway - Protocol at the very minimum." - INDEX { - jnxBgpM2VersionIndex - } - ::= { jnxBgpM2VersionTable 1 } - - - JnxBgpM2VersionEntry ::= SEQUENCE { - jnxBgpM2VersionIndex - Unsigned32, - jnxBgpM2VersionSupported - TruthValue - } - - - jnxBgpM2VersionIndex OBJECT-TYPE - SYNTAX Unsigned32(0..255) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The version number of the BGP Protocol." - ::= { jnxBgpM2VersionEntry 1 } - - - jnxBgpM2VersionSupported OBJECT-TYPE - SYNTAX TruthValue - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "This value is TRUE if this version of the BGP protocol - identified in 'jnxBgpM2VersionIndex' is supported. The absence - of a row for a particular jnxBgpM2VersionIndex indicates that - that jnxBgpM2VersionIndex protocol version number is not - supported." - ::= { jnxBgpM2VersionEntry 2 } - - - -- - -- Supported authentication mechanisms - -- - - jnxBgpM2SupportedAuthentication - OBJECT IDENTIFIER ::= { jnxBgpM2BaseScalars 2 } - - - jnxBgpM2SupportedAuthTable OBJECT-TYPE - SYNTAX SEQUENCE OF JnxBgpM2SupportedAuthEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "The supported BGP authentication mechanisms." - ::= { jnxBgpM2SupportedAuthentication 1 } - - - jnxBgpM2SupportedAuthEntry OBJECT-TYPE - SYNTAX JnxBgpM2SupportedAuthEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "Entry containing information whether a given BGP - authentication mechanism is supported by this - implementation." - INDEX { - jnxBgpM2SupportedAuthCode - } - ::= { jnxBgpM2SupportedAuthTable 1 } - - - JnxBgpM2SupportedAuthEntry ::= SEQUENCE { - jnxBgpM2SupportedAuthCode - Unsigned32, - jnxBgpM2SupportedAuthValue - TruthValue - } - - - jnxBgpM2SupportedAuthCode OBJECT-TYPE - SYNTAX Unsigned32(0..255) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The BGP authentication code." - ::= { jnxBgpM2SupportedAuthEntry 1 } - - - jnxBgpM2SupportedAuthValue OBJECT-TYPE - SYNTAX TruthValue - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "This value is TRUE if a given authentication method - is supported by the local implementation." - ::= { jnxBgpM2SupportedAuthEntry 2 } - - - -- - -- Supported BGP Capabilities - -- - - jnxBgpM2SupportedCapabilities - OBJECT IDENTIFIER ::= { jnxBgpM2BaseScalars 3 } - - - jnxBgpM2CapabilitySupportAvailable OBJECT-TYPE - SYNTAX TruthValue - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "This value is TRUE if capability support is - available and is enabled." - ::= { jnxBgpM2SupportedCapabilities 1 } - - - jnxBgpM2SupportedCapabilitiesTable OBJECT-TYPE - SYNTAX SEQUENCE OF JnxBgpM2SupportedCapabilitiesEntry -- *** JNX *** - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "Table of supported BGP-4 capabilities." - ::= { jnxBgpM2SupportedCapabilities 2 } - jnxBgpM2SupportedCapabilitiesEntry OBJECT-TYPE - SYNTAX JnxBgpM2SupportedCapabilitiesEntry -- *** JNX *** - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "Information about supported capabilities indexed - by capability number." - INDEX { - jnxBgpM2SupportedCapabilityCode - } - ::= { jnxBgpM2SupportedCapabilitiesTable 1 } - - - JnxBgpM2SupportedCapabilitiesEntry ::= SEQUENCE { -- *** JNX *** - jnxBgpM2SupportedCapabilityCode - Unsigned32, - jnxBgpM2SupportedCapability - TruthValue - } - - - jnxBgpM2SupportedCapabilityCode OBJECT-TYPE - SYNTAX Unsigned32 (0..255) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "Index of supported capability. The index directly - corresponds with the BGP-4 Capability Advertisement - Capability Code." - ::= { jnxBgpM2SupportedCapabilitiesEntry 1 } - - - jnxBgpM2SupportedCapability OBJECT-TYPE - SYNTAX TruthValue - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "This value is True if this capability is supported, - False otherwise." - ::= { jnxBgpM2SupportedCapabilitiesEntry 2 } - - - -- - -- Base Scalars - -- - - - jnxBgpM2AsSize OBJECT-TYPE - SYNTAX INTEGER { - twoOctet(1), - fourOctet(2) - } - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The size of the AS value in this implementation. - - The semantics of this are determined as per the - as-4bytes draft." - REFERENCE - "draft-ietf-idr-as4bytes-04" - ::= { jnxBgpM2BaseScalars 4 } - - - jnxBgpM2LocalAs OBJECT-TYPE - SYNTAX InetAutonomousSystemNumber - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The local autonomous system number. - - If the jnxBgpM2AsSize is twoOctet, then the range is - constrained to be 0-65535." - ::= { jnxBgpM2BaseScalars 5 } - - - jnxBgpM2LocalIdentifier OBJECT-TYPE - SYNTAX JnxBgpM2Identifier - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The BGP Identifier of local system. - - Current practice is trending away from this value being - treated as an IP address and more as a generic - identifier." - ::= { jnxBgpM2BaseScalars 6 } - - - -- - -- Base Scalar Extensions - -- - - jnxBgpM2BaseScalarExtensions - OBJECT IDENTIFIER ::= { jnxBgpM2BaseScalars 7 } - jnxBgpM2BaseScalarNonCapExts - OBJECT IDENTIFIER ::= { jnxBgpM2BaseScalarExtensions 1 } - - - jnxBgpM2BaseScalarCapExts - OBJECT IDENTIFIER ::= { jnxBgpM2BaseScalarExtensions 2 } - - - -- - -- Base Scalar Route Reflection Extensions - -- - - jnxBgpM2BaseScalarRouteReflectExts OBJECT IDENTIFIER ::= - { jnxBgpM2BaseScalarNonCapExts 2796 } - - - jnxBgpM2RouteReflector OBJECT-TYPE - SYNTAX TruthValue - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "This value is TRUE if this implementation supports the - BGP Route Reflection Extension and is enabled as a - route reflector. If the BGP Route Reflection extension - is not supported this value must be FALSE." - REFERENCE - "RFC 2796 - BGP Route Reflection" - ::= { jnxBgpM2BaseScalarRouteReflectExts 1 } - - - jnxBgpM2ClusterId OBJECT-TYPE - SYNTAX JnxBgpM2Identifier - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The configured Cluster-ID of the BGP Speaker. This will - default to the BGP Speaker's JnxBgpM2Identifier if this - speaker is functioning as a route reflector and an - explicit Cluster-ID has not been configured. - - A value of 0.0.0.0 will be present if Route Reflection is - not enabled." - REFERENCE - "RFC 2796 - BGP Route Reflection" - ::= { jnxBgpM2BaseScalarRouteReflectExts 2 } - - - -- - -- Base Scalar AS Confederation Extensions - -- - - jnxBgpM2BaseScalarASConfedExts OBJECT IDENTIFIER ::= - { jnxBgpM2BaseScalarNonCapExts 3065 } - - - jnxBgpM2ConfederationRouter OBJECT-TYPE - SYNTAX TruthValue - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "This value is TRUE if this implementation supports the - BGP AS Confederations Extension and this router is - configured to be in a confederation." - REFERENCE - "RFC 3065 - Autonomous System Confederations for BGP" - ::= { jnxBgpM2BaseScalarASConfedExts 1 } - - - jnxBgpM2ConfederationId OBJECT-TYPE - SYNTAX InetAutonomousSystemNumber - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The local Confederation Identification Number. - - This value will be zero (0) if this BGP Speaker is not - a confederation router." - REFERENCE - "RFC 3065 - Autonomous System Confederations for BGP" - ::= { jnxBgpM2BaseScalarASConfedExts 2 } - - - -- - -- Base Configuration Objects - -- - - jnxBgpM2BaseScalarConfiguration - OBJECT IDENTIFIER ::= { jnxBgpM2BaseScalars 8 } - - - jnxBgpM2CfgBaseScalarStorageType OBJECT-TYPE - SYNTAX StorageType - MAX-ACCESS read-write - STATUS current - DESCRIPTION - "This object specifies the intended storage type for - all configurable base scalars." - ::= { jnxBgpM2BaseScalarConfiguration 1 } - - - jnxBgpM2CfgLocalAs OBJECT-TYPE - SYNTAX InetAutonomousSystemNumber - MAX-ACCESS read-write - STATUS current - DESCRIPTION - "The local autonomous system number. - - If the jnxBgpM2AsSize is twoOctet, then the range is - constrained to be 0-65535." - ::= { jnxBgpM2BaseScalarConfiguration 2 } - - - jnxBgpM2CfgLocalIdentifier OBJECT-TYPE - SYNTAX JnxBgpM2Identifier - MAX-ACCESS read-write - STATUS current - DESCRIPTION - "The BGP Identifier of local system. - - Current practice is trending away from this value being - treated as an IP address and more as a generic - identifier." - ::= { jnxBgpM2BaseScalarConfiguration 3 } - - - -- - -- Base Scalar Extensions - -- - - jnxBgpM2CfgBaseScalarExtensions - OBJECT IDENTIFIER ::= { jnxBgpM2BaseScalarConfiguration 4 } - - - jnxBgpM2CfgBaseScalarNonCapExts - OBJECT IDENTIFIER ::= { jnxBgpM2CfgBaseScalarExtensions 1 } - - - jnxBgpM2CfgBaseScalarCapExts - OBJECT IDENTIFIER ::= { jnxBgpM2CfgBaseScalarExtensions 2 } - - - -- - -- Base Scalar Route Reflection Extensions - -- - jnxBgpM2CfgBaseScalarReflectorExts - OBJECT IDENTIFIER ::= { jnxBgpM2CfgBaseScalarNonCapExts 2796 } - - - jnxBgpM2CfgRouteReflector OBJECT-TYPE - SYNTAX TruthValue - MAX-ACCESS read-write - STATUS current - DESCRIPTION - "This value is set to true if this implementation will - be supporting route reflection." - REFERENCE - "RFC 2796 - BGP Route Reflection" - ::= { jnxBgpM2CfgBaseScalarReflectorExts 1 } - - - jnxBgpM2CfgClusterId OBJECT-TYPE - SYNTAX JnxBgpM2Identifier - MAX-ACCESS read-write - STATUS current - DESCRIPTION - "The configured Cluster-ID of the BGP Speaker. This will - default to the BGP Speaker's JnxBgpM2Identifier if this - speaker is functioning as a route reflector and an - explicit Cluster-ID has not been configured. - - A value of 0.0.0.0 will be present if Route Reflection is - not enabled." - REFERENCE - "RFC 2796 - BGP Route Reflection" - ::= { jnxBgpM2CfgBaseScalarReflectorExts 2 } - - - -- - -- Base Scalar AS Confederation Extensions - -- - - jnxBgpM2CfgBaseScalarASConfedExts - OBJECT IDENTIFIER ::= { jnxBgpM2CfgBaseScalarNonCapExts 3065 } - - - jnxBgpM2CfgConfederationRouter OBJECT-TYPE - SYNTAX TruthValue - MAX-ACCESS read-write - STATUS current - DESCRIPTION - "This value is set to true if this implementation will be - supporting BGP AS Confederations." - REFERENCE - "RFC 3065 - Autonomous System Confederations for BGP" - ::= { jnxBgpM2CfgBaseScalarASConfedExts 1 } - - - jnxBgpM2CfgConfederationId OBJECT-TYPE - SYNTAX InetAutonomousSystemNumber - MAX-ACCESS read-write - STATUS current - DESCRIPTION - "The local Confederation Identification Number. - - This value will be zero (0) if this BGP Speaker is not - a confederation router." - REFERENCE - "RFC 3065 - Autonomous System Confederations for BGP" - ::= { jnxBgpM2CfgBaseScalarASConfedExts 2 } - - - -- - -- BGP Peer Data - -- - - jnxBgpM2Peer - OBJECT IDENTIFIER ::= { jnxBgpM2 2 } - - - jnxBgpM2PeerData - OBJECT IDENTIFIER ::= { jnxBgpM2Peer 1 } - - - jnxBgpM2PeerTable OBJECT-TYPE - SYNTAX SEQUENCE OF JnxBgpM2PeerEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "BGP peer table. - - This table contains, one entry per remote BGP peer, - any information about the connections with the remote - BGP peers." - ::= { jnxBgpM2PeerData 1 } - - - jnxBgpM2PeerEntry OBJECT-TYPE - SYNTAX JnxBgpM2PeerEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "Entry containing information about the connection with - a remote BGP peer." - INDEX { - jnxBgpM2PeerRoutingInstance, - jnxBgpM2PeerLocalAddrType, - jnxBgpM2PeerLocalAddr, - jnxBgpM2PeerRemoteAddrType, - jnxBgpM2PeerRemoteAddr - } - ::= { jnxBgpM2PeerTable 1 } - - - JnxBgpM2PeerEntry ::= SEQUENCE { - jnxBgpM2PeerIdentifier - JnxBgpM2Identifier, - jnxBgpM2PeerState - INTEGER, - jnxBgpM2PeerStatus - INTEGER, - jnxBgpM2PeerConfiguredVersion - Unsigned32, - jnxBgpM2PeerNegotiatedVersion - Unsigned32, - jnxBgpM2PeerLocalAddrType - InetAddressType, - jnxBgpM2PeerLocalAddr - InetAddress, - jnxBgpM2PeerLocalPort - InetPortNumber, - jnxBgpM2PeerLocalAs - InetAutonomousSystemNumber, - jnxBgpM2PeerRemoteAddrType - InetAddressType, - jnxBgpM2PeerRemoteAddr - InetAddress, - jnxBgpM2PeerRemotePort - InetPortNumber, - jnxBgpM2PeerRemoteAs - InetAutonomousSystemNumber, - jnxBgpM2PeerIndex - Unsigned32, -- *** JNX *** - jnxBgpM2PeerRoutingInstance -- *** JNX *** - Unsigned32 - } - - - jnxBgpM2PeerIdentifier OBJECT-TYPE - SYNTAX JnxBgpM2Identifier - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The BGP Identifier of this entry's remote BGP peer. - - This entry should be 0.0.0.0 unless the jnxBgpM2PeerState is - in the OpenConfirm or the Established state." - REFERENCE - "draft-ietf-idr-bgp4-17.txt, Sec. 4.2" - ::= { jnxBgpM2PeerEntry 1 } - - - jnxBgpM2PeerState OBJECT-TYPE - SYNTAX INTEGER { - idle(1), - connect(2), - active(3), - opensent(4), - openconfirm(5), - established(6) - } - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The remote BGP peer's FSM state." - REFERENCE - "draft-ietf-idr-bgp4-17.txt, Sec. 8" - ::= { jnxBgpM2PeerEntry 2 } - - - jnxBgpM2PeerStatus OBJECT-TYPE - SYNTAX INTEGER { - halted(1), - running(2) - } - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "Whether or not the BGP FSM for this remote peer is halted - or running. The BGP FSM for a remote peer is halted after - processing a Stop event. Likewise, it is in the running - state after a Start event. - - The jnxBgpM2PeerState will generally be in the idle state when - the FSM is halted, although some extensions such as - Graceful Restart will leave the peer in the Idle state - but with the FSM running." - ::= { jnxBgpM2PeerEntry 3 } - jnxBgpM2PeerConfiguredVersion OBJECT-TYPE - SYNTAX Unsigned32 (1..255) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The configured version to originally start with this - remote peer. The BGP speaker may permit negotiation to a - lower version number of the protocol." - ::= { jnxBgpM2PeerEntry 4 } - - - jnxBgpM2PeerNegotiatedVersion OBJECT-TYPE - SYNTAX Unsigned32 (1..255) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The negotiated version of BGP running between the two - peers." - ::= { jnxBgpM2PeerEntry 5 } - - - jnxBgpM2PeerLocalAddrType OBJECT-TYPE - SYNTAX InetAddressType - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The address family of the local end of the peering - session." - ::= { jnxBgpM2PeerEntry 6 } - - - jnxBgpM2PeerLocalAddr OBJECT-TYPE - SYNTAX InetAddress (SIZE(4..20)) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The address of the local end of the peering session." - ::= { jnxBgpM2PeerEntry 7 } - - - jnxBgpM2PeerLocalPort OBJECT-TYPE - SYNTAX InetPortNumber - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The local port for the TCP connection between the BGP - peers." - ::= { jnxBgpM2PeerEntry 8 } - jnxBgpM2PeerLocalAs OBJECT-TYPE - SYNTAX InetAutonomousSystemNumber - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "Some implementations of BGP can represent themselves - as multiple ASs. This is the AS that this peering - session is representing itself as to the remote peer." - ::= { jnxBgpM2PeerEntry 9 } - - - jnxBgpM2PeerRemoteAddrType OBJECT-TYPE - SYNTAX InetAddressType - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The address family of the remote end of the peering - session." - ::= { jnxBgpM2PeerEntry 10 } - - - jnxBgpM2PeerRemoteAddr OBJECT-TYPE - SYNTAX InetAddress (SIZE(4..20)) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The address of the remote end of the peering session." - ::= { jnxBgpM2PeerEntry 11 } - - - jnxBgpM2PeerRemotePort OBJECT-TYPE - SYNTAX InetPortNumber - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The remote port for the TCP connection between the BGP - peers. In the case of a transport for which the notion - of 'port' is irrelevant, an instance value of -1 - should be returned by the agent for this object. - - Note that the objects jnxBgpM2PeerLocalAddr, - jnxBgpM2PeerLocalPort, jnxBgpM2PeerRemoteAddr and - jnxBgpM2PeerRemotePort provide the appropriate reference to - the standard MIB TCP connection table. or even the ipv6 - TCP MIB as in rfc2452." - REFERENCE - "RFC 2012 - SNMPv2 Management Information Base for the - Transmission Control Protocol using SMIv2. - RFC 2542 - IP Version 6 Management Information Base - for the Transmission Control Protocol." - ::= { jnxBgpM2PeerEntry 12 } - - - jnxBgpM2PeerRemoteAs OBJECT-TYPE - SYNTAX InetAutonomousSystemNumber - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The remote autonomous system number." - ::= { jnxBgpM2PeerEntry 13 } - - - jnxBgpM2PeerIndex OBJECT-TYPE - SYNTAX Unsigned32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "This value is a unique index for the remote peer entry - in the jnxBgpM2PeerTable. It is assigned by the agent - at the point of creation of the jnxBgpM2PeerTable row - entry. While its value is guaranteed to be unique at - any time, it is otherwise opaque to the management - application with respect to its value or the contiguity - of jnxBgpM2PeerIndex row instance values across rows of - the jnxBgpM2PeerTable. It is used to provide an index - structure for other tables whose data is logically - per-peer. - - For explicitly configured peers, this value will remain - consistent until this row is deleted by deleting the - configured peers. Unconfigured peers will generate - a monotonically increasing number when a BGP FSM is - built to process the peering session. Values in the - jnxBgpM2PeerTable and other tables utilizing jnxBgpM2PeerIndex - are expected to remain in existence for an arbitrary - time after the unconfigured peer has been deleted - in order to allow management applications to extract - useful management information for those peers. Thus, - an unconfigured peer using the same indices as the - jnxBgpM2PeerTable that comes up while this row still - exists will re-utilize the same row." - ::= { jnxBgpM2PeerEntry 14 } - - jnxBgpM2PeerRoutingInstance OBJECT-TYPE -- *** JNX *** - SYNTAX Unsigned32 -- *** JNX *** - MAX-ACCESS read-only -- *** JNX *** - STATUS current -- *** JNX *** - DESCRIPTION -- *** JNX *** - "Routing instance index." -- *** JNX *** - ::= { jnxBgpM2PeerEntry 15 } -- *** JNX *** - - -- - -- Errors - -- - - jnxBgpM2PeerErrors - OBJECT IDENTIFIER ::= { jnxBgpM2Peer 2 } - - jnxBgpM2PeerErrorsTable OBJECT-TYPE - SYNTAX SEQUENCE OF JnxBgpM2PeerErrorsEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "On a per peer basis, this table reflects the last - protocol-defined error encountered and reported on - the peer session. If no entry for a given peer, - by its jnxBgpM2PeerIndex, exists in this table, then no - such errors have been observed, reported, and - recorded on the session." - ::= { jnxBgpM2PeerErrors 1 } - - - jnxBgpM2PeerErrorsEntry OBJECT-TYPE - SYNTAX JnxBgpM2PeerErrorsEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "Each entry contains information about errors sent - and received for a particular BGP peer." - AUGMENTS { - jnxBgpM2PeerEntry - } - ::= { jnxBgpM2PeerErrorsTable 1 } - - - JnxBgpM2PeerErrorsEntry ::= SEQUENCE { - jnxBgpM2PeerLastErrorReceived - OCTET STRING, - jnxBgpM2PeerLastErrorSent - OCTET STRING, - jnxBgpM2PeerLastErrorReceivedTime - TimeTicks, - jnxBgpM2PeerLastErrorSentTime - TimeTicks, - jnxBgpM2PeerLastErrorReceivedText - SnmpAdminString, - jnxBgpM2PeerLastErrorSentText - SnmpAdminString, - jnxBgpM2PeerLastErrorReceivedData - OCTET STRING, - jnxBgpM2PeerLastErrorSentData - OCTET STRING - } - - - jnxBgpM2PeerLastErrorReceived OBJECT-TYPE - SYNTAX OCTET STRING (SIZE (2)) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The last error code and subcode received by this BGP - Speaker via a NOTIFICATION message for this peer. - If no error has occurred, this field is zero. - Otherwise, the first byte of this two byte - OCTET STRING contains the error code, and the second - byte contains the subcode." - REFERENCE - "draft-ietf-idr-bgp4-15.txt, Sec. 4.5" - ::= { jnxBgpM2PeerErrorsEntry 1 } - - - jnxBgpM2PeerLastErrorSent OBJECT-TYPE - SYNTAX OCTET STRING (SIZE (2)) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The last error code and subcode sent by this BGP - Speaker via a NOTIFICATION message to this peer. - If no error has occurred, this field is zero. - Otherwise, the first byte of this two byte - OCTET STRING contains the error code, and the second - byte contains the subcode." - REFERENCE - "draft-ietf-idr-bgp4-15.txt, Sec. 4.5" - ::= { jnxBgpM2PeerErrorsEntry 2 } - - - jnxBgpM2PeerLastErrorReceivedTime OBJECT-TYPE - SYNTAX TimeTicks - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The timestamp that the last NOTIFICATION was received from - this peer." - REFERENCE - "draft-ietf-idr-bgp4-15.txt, Sec. 4.5" - ::= { jnxBgpM2PeerErrorsEntry 3 } - jnxBgpM2PeerLastErrorSentTime OBJECT-TYPE - SYNTAX TimeTicks - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The timestamp that the last NOTIFICATION was sent to - this peer." - REFERENCE - "draft-ietf-idr-bgp4-15.txt, Sec. 4.5" - ::= { jnxBgpM2PeerErrorsEntry 4 } - - - jnxBgpM2PeerLastErrorReceivedText OBJECT-TYPE - SYNTAX SnmpAdminString - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "This object contains an implementation specific - explanation of the error that was reported." - ::= { jnxBgpM2PeerErrorsEntry 5 } - - - jnxBgpM2PeerLastErrorSentText OBJECT-TYPE - SYNTAX SnmpAdminString - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "This object contains an implementation specific - explanation of the error that is being reported." - ::= { jnxBgpM2PeerErrorsEntry 6 } - - - jnxBgpM2PeerLastErrorReceivedData OBJECT-TYPE - SYNTAX OCTET STRING (SIZE(0..4075)) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The last error code's data seen by this peer." - REFERENCE - "draft-ietf-idr-bgp4-15.txt, Sec. 4.5" - ::= { jnxBgpM2PeerErrorsEntry 7 } - - - jnxBgpM2PeerLastErrorSentData OBJECT-TYPE - SYNTAX OCTET STRING (SIZE(0..4075)) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The last error code's data sent to this peer." - REFERENCE - "draft-ietf-idr-bgp4-15.txt, Sec. 4.5" - ::= { jnxBgpM2PeerErrorsEntry 8 } - - - -- - -- Peer Authentication - -- - - jnxBgpM2PeerAuthentication - OBJECT IDENTIFIER ::= { jnxBgpM2Peer 3 } - - - jnxBgpM2PeerAuthTable OBJECT-TYPE - SYNTAX SEQUENCE OF JnxBgpM2PeerAuthEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "BGP peer authentication table. - - This table contains, one entry per BGP peer, - information about the authentication with BGP peers." - ::= { jnxBgpM2PeerAuthentication 1 } - - - jnxBgpM2PeerAuthEntry OBJECT-TYPE - SYNTAX JnxBgpM2PeerAuthEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "Entry containing information about the authentication - with a BGP peer." - AUGMENTS { - jnxBgpM2PeerEntry - } - ::= { jnxBgpM2PeerAuthTable 1 } - - - JnxBgpM2PeerAuthEntry ::= SEQUENCE { - jnxBgpM2PeerAuthSent - TruthValue, - jnxBgpM2PeerAuthSentCode - Unsigned32, - jnxBgpM2PeerAuthSentValue - OCTET STRING, - jnxBgpM2PeerAuthRcvd - TruthValue, - jnxBgpM2PeerAuthRcvdCode - Unsigned32, - jnxBgpM2PeerAuthRcvdValue - OCTET STRING - } - - - jnxBgpM2PeerAuthSent OBJECT-TYPE - SYNTAX TruthValue - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The local peer has sent authentication information - to the remote peer in the BGP Authentication field." - ::= { jnxBgpM2PeerAuthEntry 1 } - - - jnxBgpM2PeerAuthSentCode OBJECT-TYPE - SYNTAX Unsigned32 (0..255) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The code of the authentication information sent to - the remote peer." - ::= { jnxBgpM2PeerAuthEntry 2 } - - - jnxBgpM2PeerAuthSentValue OBJECT-TYPE - SYNTAX OCTET STRING (SIZE (0..252)) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The payload of the authentication information - from the remote peer." - ::= { jnxBgpM2PeerAuthEntry 3 } - - - jnxBgpM2PeerAuthRcvd OBJECT-TYPE - SYNTAX TruthValue - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The local peer has received authentication information - from the remote peer in the BGP Authentication field." - ::= { jnxBgpM2PeerAuthEntry 4 } - - - jnxBgpM2PeerAuthRcvdCode OBJECT-TYPE - SYNTAX Unsigned32 (0..255) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The code of the authentication information received from - the remote peer." - ::= { jnxBgpM2PeerAuthEntry 5 } - - - jnxBgpM2PeerAuthRcvdValue OBJECT-TYPE - SYNTAX OCTET STRING (SIZE (0..252)) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The payload of the authentication information from - the remote peer." - ::= { jnxBgpM2PeerAuthEntry 6 } - - - -- - -- Peer Event Times - -- - - jnxBgpM2PeerTimers - OBJECT IDENTIFIER ::= { jnxBgpM2Peer 4 } - - - jnxBgpM2PeerEventTimesTable OBJECT-TYPE - SYNTAX SEQUENCE OF JnxBgpM2PeerEventTimesEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "A table reporting the per-peering session amount - of time elapsed and update events since the peering - session advanced into the Established state." - ::= { jnxBgpM2PeerTimers 1 } - - - jnxBgpM2PeerEventTimesEntry OBJECT-TYPE - SYNTAX JnxBgpM2PeerEventTimesEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "Each row contains a set of statistics about time - spent and events encountered in the peer session - Established state." - AUGMENTS { - jnxBgpM2PeerEntry - } - ::= { jnxBgpM2PeerEventTimesTable 1 } - - - JnxBgpM2PeerEventTimesEntry ::= SEQUENCE { - jnxBgpM2PeerFsmEstablishedTime - Gauge32, - jnxBgpM2PeerInUpdatesElapsedTime - Gauge32 - } - - - jnxBgpM2PeerFsmEstablishedTime OBJECT-TYPE - SYNTAX Gauge32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "This timer indicates how long (in seconds) this - peer has been in the Established state or how long - since this peer was last in the Established state. - It is set to zero when a new peer is configured or - the router is booted." - ::= { jnxBgpM2PeerEventTimesEntry 1 } - - - jnxBgpM2PeerInUpdatesElapsedTime OBJECT-TYPE - SYNTAX Gauge32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "Elapsed time in seconds since the last BGP UPDATE - message was received from the peer. Each time - jnxBgpM2PeerInUpdates is incremented, the value of this - object is set to zero (0). This value shall also be - zero (0) when the peer is not in the Established state" - ::= { jnxBgpM2PeerEventTimesEntry 2 } - - - -- - -- Peer Configured Timers - -- - - jnxBgpM2PeerConfiguredTimersTable OBJECT-TYPE - SYNTAX SEQUENCE OF JnxBgpM2PeerConfiguredTimersEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "Per peer management data on BGP session timers." - ::= { jnxBgpM2PeerTimers 2 } - - jnxBgpM2PeerConfiguredTimersEntry OBJECT-TYPE - SYNTAX JnxBgpM2PeerConfiguredTimersEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "Each entry corresponds to the current state of - BGP timers on a given peering session." - AUGMENTS { - jnxBgpM2PeerEntry - } - ::= { jnxBgpM2PeerConfiguredTimersTable 1 } - - - JnxBgpM2PeerConfiguredTimersEntry ::= SEQUENCE { - jnxBgpM2PeerConnectRetryInterval - Unsigned32, - jnxBgpM2PeerHoldTimeConfigured - Unsigned32, - jnxBgpM2PeerKeepAliveConfigured - Unsigned32, - jnxBgpM2PeerMinASOrigInterval - Unsigned32, - jnxBgpM2PeerMinRouteAdverInterval - Unsigned32 - } - - - jnxBgpM2PeerConnectRetryInterval OBJECT-TYPE - SYNTAX Unsigned32 (1..65535) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "Time interval in seconds for the ConnectRetry - timer. The suggested value for this timer is 120 - seconds." - ::= { jnxBgpM2PeerConfiguredTimersEntry 1 } - - - jnxBgpM2PeerHoldTimeConfigured OBJECT-TYPE - SYNTAX Unsigned32 ( 0 | 3..65535 ) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "Time interval in seconds for the Hold Time configured - for this BGP speaker with this peer. This value - is placed in an OPEN message sent to this peer by - this BGP speaker, and is compared with the Hold - Time field in an OPEN message received from the - peer when determining the Hold Time (jnxBgpM2PeerHoldTime) - with the peer. This value must not be less than - three seconds if it is not zero (0) in which case - the Hold Time is NOT to be established with the - peer. The suggested value for this timer is 90 - seconds." - REFERENCE - "draft-ietf-idr-bgp4-17.txt, Appendix 6.4" - ::= { jnxBgpM2PeerConfiguredTimersEntry 2 } - - - jnxBgpM2PeerKeepAliveConfigured OBJECT-TYPE - SYNTAX Unsigned32 ( 0 | 1..21845 ) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "Time interval in seconds for the KeepAlive timer - configured for this BGP speaker with this peer. - The value of this object will only determine the - KEEPALIVE messages frequency relative to the value - specified in jnxBgpM2PeerHoldTimeConfigured; the actual - time interval for the KEEPALIVE messages is indicated - by jnxBgpM2PeerKeepAlive. A reasonable maximum value - for this timer would be configured to be one third - of that of jnxBgpM2PeerHoldTimeConfigured. - - If the value of this object is zero (0), no - periodical KEEPALIVE messages are sent to the peer - after the BGP connection has been established. - The suggested value for this timer is 30 seconds." - REFERENCE - "draft-ietf-idr-bgp4-17.txt, Appendix 6.4" - ::= { jnxBgpM2PeerConfiguredTimersEntry 3 } - - - jnxBgpM2PeerMinASOrigInterval OBJECT-TYPE - SYNTAX Unsigned32 (0..65535) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "Time interval in seconds for the MinASOriginationInterval - timer. The suggested value for this timer is 15 - seconds." - ::= { jnxBgpM2PeerConfiguredTimersEntry 4 } - jnxBgpM2PeerMinRouteAdverInterval OBJECT-TYPE - SYNTAX Unsigned32 (0..65535) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "Time interval in seconds for the - MinRouteAdvertisementInterval timer. The suggested - value for this timer is 30 seconds." - ::= { jnxBgpM2PeerConfiguredTimersEntry 5 } - - - -- - -- Peer Negotiated Timers - -- - - jnxBgpM2PeerNegotiatedTimersTable OBJECT-TYPE - SYNTAX SEQUENCE OF JnxBgpM2PeerNegotiatedTimersEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "Current values of per-peer timers which can be - dynamically set in the jnxBgpM2PeerConfiguredTimersTable. - Values reflected in this table are the current - operational values, after negotiation from values - derived from initial configuration or last set from - jnxBgpM2PeerConfiguredTimersTable row instances." - ::= { jnxBgpM2PeerTimers 3 } - - - jnxBgpM2PeerNegotiatedTimersEntry OBJECT-TYPE - SYNTAX JnxBgpM2PeerNegotiatedTimersEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "Each entry reflects a value of the currently - operational, negotiated timers as reflected in the - JnxBgpM2PeerNegotiatedTimersEntry." - AUGMENTS { - jnxBgpM2PeerEntry - } - ::= { jnxBgpM2PeerNegotiatedTimersTable 1 } - - - JnxBgpM2PeerNegotiatedTimersEntry ::= SEQUENCE { - jnxBgpM2PeerHoldTime - Unsigned32, - jnxBgpM2PeerKeepAlive - Unsigned32 - } - - - jnxBgpM2PeerHoldTime OBJECT-TYPE - SYNTAX Unsigned32 ( 0 | 3..65535 ) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The value of this object is calculated by this BGP - Speaker as being; - - zero (0) - if this was the value sent by the peer and - this value is permitted by this BGP Speaker. In this - case, no keepalive messages are sent and the Hold Timer - is not set. - - At least three (3). This value is the smaller of - the value sent by this peer in the OPEN message and - jnxBgpM2PeerHoldTimeConfigured for this peer. - - This value is only defined when the peering session is - in the Established state." - REFERENCE - "draft-ietf-idr-bgp4-17.txt, Sec. 4.2" - ::= { jnxBgpM2PeerNegotiatedTimersEntry 1 } - - - jnxBgpM2PeerKeepAlive OBJECT-TYPE - SYNTAX Unsigned32 ( 0 | 1..21845 ) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "Time interval in seconds for the KeepAlive timer - established with the peer. The value of this object - is calculated by this BGP speaker such that, when - compared with jnxBgpM2PeerHoldTime, it has the same - proportion as what jnxBgpM2PeerKeepAliveConfigured has - when compared with jnxBgpM2PeerHoldTimeConfigured. If - the value of this object is zero (0), it indicates - that the KeepAlive timer has not been established - with the peer, or, the value of - jnxBgpM2PeerKeepAliveConfigured is zero (0). - - This value is only defined when the peering session is - in the Established state." - REFERENCE - "draft-ietf-idr-bgp4-17, Sec. 4.4" - ::= { jnxBgpM2PeerNegotiatedTimersEntry 2 } - -- - -- Peer Capabilities - -- - - jnxBgpM2PeerCapabilities - OBJECT IDENTIFIER ::= { jnxBgpM2Peer 5 } - - - -- - -- Announced Capabilities - -- - - jnxBgpM2PeerCapsAnnouncedTable OBJECT-TYPE - SYNTAX SEQUENCE OF JnxBgpM2PeerCapsAnnouncedEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "This table contains the capabilities - that are supported for a given peer." - ::= { jnxBgpM2PeerCapabilities 1 } - - - jnxBgpM2PeerCapsAnnouncedEntry OBJECT-TYPE - SYNTAX JnxBgpM2PeerCapsAnnouncedEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "These entries are keyed by a BGP-4 peer remote - address and the BGP Capability Code" - INDEX { - jnxBgpM2PeerIndex, - jnxBgpM2PeerCapAnnouncedCode, - jnxBgpM2PeerCapAnnouncedIndex - } - ::= { jnxBgpM2PeerCapsAnnouncedTable 1 } - - - JnxBgpM2PeerCapsAnnouncedEntry ::= SEQUENCE { - jnxBgpM2PeerCapAnnouncedCode - Unsigned32, - jnxBgpM2PeerCapAnnouncedIndex - Unsigned32, - jnxBgpM2PeerCapAnnouncedValue - OCTET STRING - } - - - jnxBgpM2PeerCapAnnouncedCode OBJECT-TYPE - SYNTAX Unsigned32 (0..255) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The BGP Capability Advertisement Capability Code." - ::= { jnxBgpM2PeerCapsAnnouncedEntry 1 } - - - jnxBgpM2PeerCapAnnouncedIndex OBJECT-TYPE - SYNTAX Unsigned32 (1..128) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "Multiple instances of a given capability may be sent - bgp a BGP speaker. This variable is used to index them." - ::= { jnxBgpM2PeerCapsAnnouncedEntry 2 } - - - jnxBgpM2PeerCapAnnouncedValue OBJECT-TYPE - SYNTAX OCTET STRING (SIZE(0..255)) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The value of the announced capability." - ::= { jnxBgpM2PeerCapsAnnouncedEntry 3 } - - - -- - -- Received Capabilities - -- - - jnxBgpM2PeerCapsReceivedTable OBJECT-TYPE - SYNTAX SEQUENCE OF JnxBgpM2PeerCapsReceivedEntry -- *** JNX *** - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "This table contains the capabilities - that are supported for a given peer." - ::= { jnxBgpM2PeerCapabilities 2 } - - - jnxBgpM2PeerCapsReceivedEntry OBJECT-TYPE - SYNTAX JnxBgpM2PeerCapsReceivedEntry -- *** JNX *** - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "These entries are keyed by a BGP-4 peer remote - address and the BGP Capability Code" - INDEX { - jnxBgpM2PeerIndex, - jnxBgpM2PeerCapReceivedCode, - jnxBgpM2PeerCapReceivedIndex - } - ::= { jnxBgpM2PeerCapsReceivedTable 1 } - - - JnxBgpM2PeerCapsReceivedEntry ::= SEQUENCE { -- *** JNX *** - jnxBgpM2PeerCapReceivedCode - Unsigned32, - jnxBgpM2PeerCapReceivedIndex - Unsigned32, - jnxBgpM2PeerCapReceivedValue - OCTET STRING - } - - - jnxBgpM2PeerCapReceivedCode OBJECT-TYPE - SYNTAX Unsigned32 (0..255) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The BGP Capability Advertisement Capability Code." - ::= { jnxBgpM2PeerCapsReceivedEntry 1 } - - - jnxBgpM2PeerCapReceivedIndex OBJECT-TYPE - SYNTAX Unsigned32 (1..128) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "Multiple instances of a given capability may be sent - bgp a BGP speaker. This variable is used to index them." - ::= { jnxBgpM2PeerCapsReceivedEntry 2 } - - - jnxBgpM2PeerCapReceivedValue OBJECT-TYPE - SYNTAX OCTET STRING (SIZE(0..255)) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The value of the announced capability." - ::= { jnxBgpM2PeerCapsReceivedEntry 3 } - - - -- - -- Per-peer counters - -- - - jnxBgpM2PeerCounters - OBJECT IDENTIFIER ::= { jnxBgpM2Peer 6 } - - - jnxBgpM2PeerCountersTable OBJECT-TYPE - SYNTAX SEQUENCE OF JnxBgpM2PeerCountersEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "The counters associated with a BGP Peer." - ::= { jnxBgpM2PeerCounters 1 } - - - jnxBgpM2PeerCountersEntry OBJECT-TYPE - SYNTAX JnxBgpM2PeerCountersEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "Each entry contains counters of message transmissions - and FSM transitions for a given BGP Peering session." - AUGMENTS { - jnxBgpM2PeerEntry - } - ::= { jnxBgpM2PeerCountersTable 1 } - - - JnxBgpM2PeerCountersEntry ::= SEQUENCE { - jnxBgpM2PeerInUpdates - Counter32, - jnxBgpM2PeerOutUpdates - Counter32, - jnxBgpM2PeerInTotalMessages - Counter32, - jnxBgpM2PeerOutTotalMessages - Counter32, - jnxBgpM2PeerFsmEstablishedTrans - Counter32 - } - - --- +++wayne need to describe what happens if connection is broken --- and then reestablished. Does the prior counter value accumulate? - jnxBgpM2PeerInUpdates OBJECT-TYPE - SYNTAX Counter32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The number of BGP UPDATE messages received on this - connection. This object should be initialized to zero - (0) when the connection is established." - ::= { jnxBgpM2PeerCountersEntry 1 } - - - jnxBgpM2PeerOutUpdates OBJECT-TYPE - SYNTAX Counter32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The number of BGP UPDATE messages transmitted on this - connection. This object should be initialized to zero - (0) when the connection is established." - ::= { jnxBgpM2PeerCountersEntry 2 } - - - jnxBgpM2PeerInTotalMessages OBJECT-TYPE - SYNTAX Counter32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The total number of messages received from the remote - peer on this connection. This object should be - initialized to zero when the connection is established." - ::= { jnxBgpM2PeerCountersEntry 3 } - - - jnxBgpM2PeerOutTotalMessages OBJECT-TYPE - SYNTAX Counter32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The total number of messages transmitted to the remote - peer on this connection. This object should be - initialized to zero when the connection is established." - ::= { jnxBgpM2PeerCountersEntry 4 } - - - jnxBgpM2PeerFsmEstablishedTrans OBJECT-TYPE - SYNTAX Counter32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The total number of times the BGP FSM - transitioned into the established state - for this peer." - ::= { jnxBgpM2PeerCountersEntry 5 } - - - -- - -- Per-Peer Prefix Counters - -- - - jnxBgpM2PrefixCountersTable OBJECT-TYPE - SYNTAX SEQUENCE OF JnxBgpM2PrefixCountersEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "Additional per-peer, per AFI SAFI counters for prefixes" - ::= { jnxBgpM2PeerCounters 2 } - - - jnxBgpM2PrefixCountersEntry OBJECT-TYPE - SYNTAX JnxBgpM2PrefixCountersEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "Entry containing information about a bgp-peers prefix - counters." - INDEX { - jnxBgpM2PeerIndex, - jnxBgpM2PrefixCountersAfi, - jnxBgpM2PrefixCountersSafi - } - ::= { jnxBgpM2PrefixCountersTable 1 } - - - JnxBgpM2PrefixCountersEntry ::= SEQUENCE { - jnxBgpM2PrefixCountersAfi - InetAddressType, - jnxBgpM2PrefixCountersSafi - JnxBgpM2Safi, - jnxBgpM2PrefixInPrefixes - Gauge32, - jnxBgpM2PrefixInPrefixesAccepted - Gauge32, - jnxBgpM2PrefixInPrefixesRejected - Gauge32, - jnxBgpM2PrefixOutPrefixes - Gauge32 - } - - - jnxBgpM2PrefixCountersAfi OBJECT-TYPE - SYNTAX InetAddressType - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The AFI index of the per-peer, per prefix counters" - ::= { jnxBgpM2PrefixCountersEntry 1 } - - - jnxBgpM2PrefixCountersSafi OBJECT-TYPE - SYNTAX JnxBgpM2Safi - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The SAFI index of the per-peer, per prefix counters" - ::= { jnxBgpM2PrefixCountersEntry 2 } - - - jnxBgpM2PrefixInPrefixes OBJECT-TYPE - SYNTAX Gauge32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The number of prefixes received from a peer and are - stored in the Adj-Ribs-In for that peer." - -- jmh - note that we are allowing stuff to be discarded - ::= { jnxBgpM2PrefixCountersEntry 7 } - - - jnxBgpM2PrefixInPrefixesAccepted OBJECT-TYPE - SYNTAX Gauge32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The number of prefixes for a peer that are installed - in the Adj-Ribs-In and are eligible to become active - in the Loc-Rib." - ::= { jnxBgpM2PrefixCountersEntry 8 } - - - jnxBgpM2PrefixInPrefixesRejected OBJECT-TYPE - SYNTAX Gauge32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The number of prefixes for a peer that are installed - in the Adj-Ribs-In and are NOT eligible to become active - in the Loc-Rib." - ::= { jnxBgpM2PrefixCountersEntry 9 } - jnxBgpM2PrefixOutPrefixes OBJECT-TYPE - SYNTAX Gauge32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The number of prefixes for a peer that are installed - in that peers Adj-Ribs-Out." - ::= { jnxBgpM2PrefixCountersEntry 10 } - - - - jnxBgpM2PeerExtensions - OBJECT IDENTIFIER ::= { jnxBgpM2Peer 7 } - - - jnxBgpM2PeerNonCapExts - OBJECT IDENTIFIER ::= { jnxBgpM2PeerExtensions 1 } - - - jnxBgpM2PeerCapExts - OBJECT IDENTIFIER ::= { jnxBgpM2PeerExtensions 2 } - - - -- - -- Peer Route Reflection Extensions - -- - - jnxBgpM2PeerRouteReflectionExts - OBJECT IDENTIFIER ::= { jnxBgpM2PeerNonCapExts 2796 } - - - jnxBgpM2PeerReflectorClientTable OBJECT-TYPE - SYNTAX SEQUENCE OF JnxBgpM2PeerReflectorClientEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "Table of route reflection client settings on a per-peer - basis." - REFERENCE - "RFC 2796 - BGP Route Reflection" - ::= { jnxBgpM2PeerRouteReflectionExts 1 } - - - jnxBgpM2PeerReflectorClientEntry OBJECT-TYPE - SYNTAX JnxBgpM2PeerReflectorClientEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "Entry containing data on a per-peer basis on whether - the peer is configured as a route reflector client." - REFERENCE - "RFC 2796 - BGP Route Reflection" - AUGMENTS { - jnxBgpM2PeerEntry - } - ::= { jnxBgpM2PeerReflectorClientTable 1 } - - - JnxBgpM2PeerReflectorClientEntry ::= SEQUENCE { - jnxBgpM2PeerReflectorClient - INTEGER - } - - jnxBgpM2PeerReflectorClient OBJECT-TYPE - SYNTAX INTEGER { - nonClient(0), - client(1), - meshedClient(2) - } - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "This value indicates whether the given peer is a - reflector client of this router, or not. A value of - nonClient indicates that this peer is not a reflector - client. A value of client indicates that this peer is a - reflector client that is not fully meshed with other - reflector clients. A value of meshedClient indicates - that the peer is a reflector client and is fully meshed - with all other reflector clients. - - This value must be nonClient (0) for BGP external peers." - REFERENCE - "RFC 2796 - BGP Route Reflection" - ::= { jnxBgpM2PeerReflectorClientEntry 1 } - - - -- - -- Peer AS Confederations Extensions - -- - - jnxBgpM2PeerASConfederationExts - OBJECT IDENTIFIER ::= { jnxBgpM2PeerNonCapExts 3065 } - - - jnxBgpM2PeerConfedMemberTable OBJECT-TYPE - SYNTAX SEQUENCE OF JnxBgpM2PeerConfedMemberEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "Table of confederation member settings on a per-peer - basis." - REFERENCE - "RFC 3065 - BGP Confederations" - ::= { jnxBgpM2PeerASConfederationExts 1 } - - - jnxBgpM2PeerConfedMemberEntry OBJECT-TYPE - SYNTAX JnxBgpM2PeerConfedMemberEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "Entry containing data on a per-peer basis on whether - the peer is configured as a BGP confederation member." - REFERENCE - "RFC 3065 - BGP Confederations" - AUGMENTS { - jnxBgpM2PeerEntry - } - ::= { jnxBgpM2PeerConfedMemberTable 1 } - - - JnxBgpM2PeerConfedMemberEntry ::= SEQUENCE { - jnxBgpM2PeerConfedMember - TruthValue - } - - - jnxBgpM2PeerConfedMember OBJECT-TYPE - SYNTAX TruthValue - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "This value indicates whether the given peer is in our - confederation or not." - REFERENCE - "RFC 3065 - BGP Confederations" - ::= { jnxBgpM2PeerConfedMemberEntry 1 } - - - -- - -- Peer configuration objects - -- - jnxBgpM2PeerConfiguration - OBJECT IDENTIFIER ::= { jnxBgpM2Peer 8 } - - - -- - -- Administering activated peering sessions - -- - - jnxBgpM2CfgPeerAdminStatusTable OBJECT-TYPE - SYNTAX SEQUENCE OF JnxBgpM2CfgPeerAdminStatusEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "Table containing rows for administratively starting and - stopping peering sessions." - ::= { jnxBgpM2PeerConfiguration 1 } - - - jnxBgpM2CfgPeerAdminStatusEntry OBJECT-TYPE - SYNTAX JnxBgpM2CfgPeerAdminStatusEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "Entry containing row for administratively starting and - stopping peers." - INDEX { - jnxBgpM2PeerIndex - } - ::= { jnxBgpM2CfgPeerAdminStatusTable 1 } - - - JnxBgpM2CfgPeerAdminStatusEntry ::= SEQUENCE { - jnxBgpM2CfgPeerAdminStatus - INTEGER - } - - - jnxBgpM2CfgPeerAdminStatus OBJECT-TYPE - SYNTAX INTEGER { - stop(1), - start(2) - } - MAX-ACCESS read-write - STATUS current - DESCRIPTION - "This object allows the Manual Stop and Manual Start - events to be sent to an activated peering session." - ::= { jnxBgpM2CfgPeerAdminStatusEntry 1 } - -- - -- Peer Configuration - -- - - jnxBgpM2CfgPeerNextIndex OBJECT-TYPE - SYNTAX Integer32 (0..65535) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "This object contains the next appropriate value to - use as an index for creation of a row instance in - in the jnxBgpM2CfgPeerTable. If the number of available - entries in the jnxBgpM2CfgPeerTable is exhausted, a - retrieval value of this object instance will return - 0. A value of 0 may also be returned if the agent - is otherwise incapable of jnxBgpM2CfgPeerTable row creation - at the time of jnxBgpM2CfgPeerNextIndex retrieval." - ::= { jnxBgpM2PeerConfiguration 2 } - - - jnxBgpM2CfgPeerTable OBJECT-TYPE - SYNTAX SEQUENCE OF JnxBgpM2CfgPeerEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "BGP configuration peer table. - - This table allows the configuration of the parameters - for a session with a BGP peer. - - +++wayne provide description of how config should be done - for a peer per table." - ::= { jnxBgpM2PeerConfiguration 3 } - - - jnxBgpM2CfgPeerEntry OBJECT-TYPE - SYNTAX JnxBgpM2CfgPeerEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "Entry containing information set up by a management - entity to configure a connection with a BGP peer." - INDEX { jnxBgpM2CfgPeerIndex } - ::= { jnxBgpM2CfgPeerTable 1 } - - - JnxBgpM2CfgPeerEntry ::= SEQUENCE { - jnxBgpM2CfgPeerConfiguredVersion - Unsigned32, - jnxBgpM2CfgAllowVersionNegotiation - TruthValue, - jnxBgpM2CfgPeerLocalAddrType - InetAddressType, - jnxBgpM2CfgPeerLocalAddr - InetAddress, - jnxBgpM2CfgPeerLocalAs - InetAutonomousSystemNumber, - jnxBgpM2CfgPeerRemoteAddrType - InetAddressType, - jnxBgpM2CfgPeerRemoteAddr - InetAddress, - jnxBgpM2CfgPeerRemotePort - Integer32, - jnxBgpM2CfgPeerRemoteAs - InetAutonomousSystemNumber, - jnxBgpM2CfgPeerEntryStorageType - StorageType, - jnxBgpM2CfgPeerError - INTEGER, - jnxBgpM2CfgPeerBgpPeerEntry - RowPointer, - jnxBgpM2CfgPeerRowEntryStatus - RowStatus, - jnxBgpM2CfgPeerIndex - Integer32, - jnxBgpM2CfgPeerStatus - INTEGER, - jnxBgpM2CfgPeerRoutingInstance -- *** JNX *** - Unsigned32 -- *** JNX *** - } - - - jnxBgpM2CfgPeerConfiguredVersion OBJECT-TYPE - SYNTAX Unsigned32 (1..255) - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "The configured version to originally start with - this peer. The BGP speaker may permit negotiation - to a lower version number of the protocol depending on the - set value of jnxBgpM2CfgAllowVersionNegotiation." - DEFVAL { 4 } - ::= { jnxBgpM2CfgPeerEntry 1 } - - - jnxBgpM2CfgAllowVersionNegotiation OBJECT-TYPE - SYNTAX TruthValue - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "If set to true, during session establishment with this - peer, negotiation to a version lower than that specified - in jnxBgpM2CfgPeerConfiguredVersion will be allowed." - DEFVAL { false } - ::= { jnxBgpM2CfgPeerEntry 2 } - - - jnxBgpM2CfgPeerLocalAddrType OBJECT-TYPE - SYNTAX InetAddressType - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "The address family of the speakers of this BGP - session." - ::= { jnxBgpM2CfgPeerEntry 3 } - - - jnxBgpM2CfgPeerLocalAddr OBJECT-TYPE - SYNTAX InetAddress (SIZE (4..20)) - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "The address of the local end of the peering session." - ::= { jnxBgpM2CfgPeerEntry 4 } - - - jnxBgpM2CfgPeerLocalAs OBJECT-TYPE - SYNTAX InetAutonomousSystemNumber - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "Autonomous system represented to peer on peering - session initialization. Some implementations of - BGP can represent themselves as multiple ASes. - These implementations can set this to an alternate - autonomous system. If this object is set to zero - (0) at the point this row instance is set to active, - then the implementation will initialize this session - representing itself as the value of jnxBgpM2CfgLocalAs." - DEFVAL { 0 } - ::= { jnxBgpM2CfgPeerEntry 5 } - - - jnxBgpM2CfgPeerRemoteAddrType OBJECT-TYPE - SYNTAX InetAddressType - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "The address family of the speakers of the remote BGP - session." - ::= { jnxBgpM2CfgPeerEntry 6 } - - - jnxBgpM2CfgPeerRemoteAddr OBJECT-TYPE - SYNTAX InetAddress (SIZE(4..20)) - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "The address of the remote end (destination address - of peer) for peering session." - ::= { jnxBgpM2CfgPeerEntry 7 } - - - jnxBgpM2CfgPeerRemotePort OBJECT-TYPE - SYNTAX Integer32 (-1 | 0..65535) - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "This is the remote port for the transport connection - between the BGP peers. In the case of a transport for - which the notion of port is irrelevant, the value of - -1 can be defaulted or set." - DEFVAL { -1 } - ::= { jnxBgpM2CfgPeerEntry 8 } - - - jnxBgpM2CfgPeerRemoteAs OBJECT-TYPE - SYNTAX InetAutonomousSystemNumber - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "Autonomous system number of the remote peer." - ::= { jnxBgpM2CfgPeerEntry 9 } - - - jnxBgpM2CfgPeerEntryStorageType OBJECT-TYPE - SYNTAX StorageType - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "This object type specifies the intended storage - type for the jnxBgpM2CfgPeerEntry row instance." - ::= { jnxBgpM2CfgPeerEntry 10 } - jnxBgpM2CfgPeerError OBJECT-TYPE - SYNTAX INTEGER { - unknown(0), - notActivated (1), - errDuplicatePeeringSession (2), - activated (3) - -- +++wayne more to follow - } - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "This value indicates the current error status of - the row denoting the configured error status. - - If this row is still under creation (has not been activated - jnxBgpM2CfgPeerRowEntryStatus), then this instance will be set to - not-activated (1). - - At the point that the row is activated, jnxBgpM2CfgPeerError - will reflect the error status of the row data itself. If - there is another session already activated with the same - local and remote addresses as denoted by - {jnxBgpM2CfgPeerLocalAddrType, jnxBgpM2CfgPeerLocalAddr, - jnxBgpM2CfgPeerRemoteAddr, jnxBgpM2CfgPeerRemotePort}, then - the value of this will be set to - err-duplicate-peering-session (2). - - If this row is associated with a peer session whose - initialization has been attempted, the value will be - set to activated (3) (and, jnxBgpM2PeerCfgPeerEntry will - be set to the row instance of the entry in the - jnxBgpM2PeerTable which reflects the state of the peering - session). - - Note that this object only reflects the error as a - function of the attempted activation of this row as - containing data for a bgp peering session. The actual - state of the session at the point of any protocol exchange - or session state machine initiation is reflected in the - jnxBgpM2PeerTable row instance (as reflected through - jnxBgpM2CfgPeerPeerEntry) associated with this row instance." - ::= { jnxBgpM2CfgPeerEntry 11 } - - - jnxBgpM2CfgPeerBgpPeerEntry OBJECT-TYPE - SYNTAX RowPointer - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "Upon activation of the session data contained in this - row instance, this object points to an instance of a row - within the jnxBgpM2PeerTable reflecting the session in its - initializing or operational state. Retrieval of this - column instance will always yield a value of {0.0} unless - the session has successfully been activated (via - jnxBgpM2CfgPeerRowEntryStatus). Such row instances will always - have a value of jnxBgpM2CfgPeerError which is activated (3)." - ::= { jnxBgpM2CfgPeerEntry 12 } - - - jnxBgpM2CfgPeerRowEntryStatus OBJECT-TYPE - SYNTAX RowStatus - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "This object type is used to control creation, - activation, and deletion of this row instance." - -- +++wayne need better directions for agent auto-removal - -- of row instances which have moved to active or error - -- state - ::= { jnxBgpM2CfgPeerEntry 13 } - - - jnxBgpM2CfgPeerIndex OBJECT-TYPE - SYNTAX Integer32 (1..65535) - MAX-ACCESS not-accessible -- *** JNX *** - STATUS current - DESCRIPTION - "Uniquely identifies an instance of a peer row, as - an element of configuration." - ::= { jnxBgpM2CfgPeerEntry 14 } - - - jnxBgpM2CfgPeerStatus OBJECT-TYPE - SYNTAX INTEGER { - halted(1), - running(2) - } - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "This specifies the state of the peering session upon - activation. If disabled, the FSM is in the halted - state and no Automatic Start events are generated. - If enabled, the FSM is in the running state and - Automatic Start events may be generated." - ::= { jnxBgpM2CfgPeerEntry 15 } - - jnxBgpM2CfgPeerRoutingInstance OBJECT-TYPE -- *** JNX *** - SYNTAX Unsigned32 -- *** JNX *** - MAX-ACCESS read-create -- *** JNX *** - STATUS current -- *** JNX *** - DESCRIPTION -- *** JNX *** - "Routing instance index." -- *** JNX *** - ::= { jnxBgpM2CfgPeerEntry 16 } -- *** JNX *** - - -- - -- Per-peer authentication table. - -- - - jnxBgpM2CfgPeerAuthTable OBJECT-TYPE - SYNTAX SEQUENCE OF JnxBgpM2CfgPeerAuthEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "Table contain per peer configuration for BGP Authentication." - ::= { jnxBgpM2PeerConfiguration 4 } - - - jnxBgpM2CfgPeerAuthEntry OBJECT-TYPE - SYNTAX JnxBgpM2CfgPeerAuthEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "Entry containing information about a peer's BGP Authentication - configuration." - AUGMENTS { - jnxBgpM2CfgPeerEntry - } - ::= { jnxBgpM2CfgPeerAuthTable 1 } - - - JnxBgpM2CfgPeerAuthEntry ::= SEQUENCE { - jnxBgpM2CfgPeerAuthEnabled - TruthValue, - jnxBgpM2CfgPeerAuthCode - Unsigned32, - jnxBgpM2CfgPeerAuthValue - OCTET STRING - } - - - jnxBgpM2CfgPeerAuthEnabled OBJECT-TYPE - SYNTAX TruthValue - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "This value is true if BGP Authentication is enabled for - this peer. This is the authentication mechanism - documented in the base BGP specification, not the MD5 - session protection mechanism." - DEFVAL { - false - } - ::= { jnxBgpM2CfgPeerAuthEntry 1 } - - - jnxBgpM2CfgPeerAuthCode OBJECT-TYPE - SYNTAX Unsigned32(0..255) - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "The authentication code for the BGP Authentication - mechanism." - REFERENCE - "draft-ietf-idr-bgp4-17.txt, Sec. 4.1.a" - ::= { jnxBgpM2CfgPeerAuthEntry 2 } - - - jnxBgpM2CfgPeerAuthValue OBJECT-TYPE - SYNTAX OCTET STRING (SIZE(0..252)) - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "The authentication payload for the BGP authentication - mechanism. This value has semantic meaning within - the context of the authentication code." - REFERENCE - "draft-ietf-idr-bgp4-17.txt, Sec. 4.1.a" - ::= { jnxBgpM2CfgPeerAuthEntry 3 } - - - -- - -- Per-peer timers table - -- - - jnxBgpM2CfgPeerTimersTable OBJECT-TYPE - SYNTAX SEQUENCE OF JnxBgpM2CfgPeerTimersEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "Table for configuration of per-peer timers." - ::= { jnxBgpM2PeerConfiguration 5 } - - - jnxBgpM2CfgPeerTimersEntry OBJECT-TYPE - SYNTAX JnxBgpM2CfgPeerTimersEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "Entry containing per-peer timer configuration." - AUGMENTS { - jnxBgpM2CfgPeerEntry - } - ::= { jnxBgpM2CfgPeerTimersTable 1 } - - - JnxBgpM2CfgPeerTimersEntry ::= SEQUENCE { - jnxBgpM2CfgPeerConnectRetryInterval - Unsigned32, - jnxBgpM2CfgPeerHoldTimeConfigured - Unsigned32, - jnxBgpM2CfgPeerKeepAliveConfigured - Unsigned32, - jnxBgpM2CfgPeerMinASOrigInterval - Unsigned32, - jnxBgpM2CfgPeerMinRouteAdverInter - Unsigned32 - } - - - jnxBgpM2CfgPeerConnectRetryInterval OBJECT-TYPE - SYNTAX Unsigned32 (1..65535) - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "Time interval in seconds for the ConnectRetry - timer. The suggested value for this timer is 120 - seconds." - DEFVAL { - 120 - } - ::= { jnxBgpM2CfgPeerTimersEntry 1 } - - - jnxBgpM2CfgPeerHoldTimeConfigured OBJECT-TYPE - SYNTAX Unsigned32 ( 0 | 3..65535 ) - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "Time interval in seconds for the Hold Time configured - for this BGP speaker with this peer. This value - is placed in an OPEN message sent to this peer by - this BGP speaker, and is compared with the Hold - Time field in an OPEN message received from the - peer when determining the Hold Time (jnxBgpM2PeerHoldTime) - with the peer. This value must not be less than - three seconds if it is not zero (0) in which case - the Hold Time is NOT to be established with the - peer. The suggested value for this timer is 90 - seconds." - REFERENCE - "draft-ietf-idr-bgp4-17.txt, Appendix 6.4" - DEFVAL { - 90 - } - ::= { jnxBgpM2CfgPeerTimersEntry 2 } - - - jnxBgpM2CfgPeerKeepAliveConfigured OBJECT-TYPE - SYNTAX Unsigned32 ( 0 | 1..21845 ) - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "Time interval in seconds for the KeepAlive timer - configured for this BGP speaker with this peer. - The value of this object will only determine the - KEEPALIVE messages frequency relative to the value - specified in jnxBgpM2PeerHoldTimeConfigured; the actual - time interval for the KEEPALIVE messages is indicated - by jnxBgpM2PeerKeepAlive. A reasonable maximum value - for this timer would be configured to be one third - of that of jnxBgpM2PeerHoldTimeConfigured. - - If the value of this object is zero (0), no - periodical KEEPALIVE messages are sent to the peer - after the BGP connection has been established. - The suggested value for this timer is 30 seconds." - REFERENCE - "draft-ietf-idr-bgp4-17.txt, Appendix 6.4" - DEFVAL { - 30 - } - ::= { jnxBgpM2CfgPeerTimersEntry 3 } - - - jnxBgpM2CfgPeerMinASOrigInterval OBJECT-TYPE - SYNTAX Unsigned32 (0..65535) - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "Time interval in seconds for the MinASOriginationInterval - timer. The suggested value for this timer is 15 - seconds." - DEFVAL { - 15 - } - ::= { jnxBgpM2CfgPeerTimersEntry 4 } - - - jnxBgpM2CfgPeerMinRouteAdverInter OBJECT-TYPE - SYNTAX Unsigned32 (0..65535) - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "Time interval in seconds for the - MinRouteAdvertisementInterval timer. The suggested - value for this timer is 30 seconds." - DEFVAL { - 30 - } - ::= { jnxBgpM2CfgPeerTimersEntry 5 } - - - -- - -- Per-peer configuration extensions - -- - - jnxBgpM2CfgPeerExtensions - OBJECT IDENTIFIER ::= { jnxBgpM2PeerConfiguration 6 } - - - jnxBgpM2CfgPeerNonCapExts - OBJECT IDENTIFIER ::= { jnxBgpM2CfgPeerExtensions 1 } - - - jnxBgpM2CfgPeerCapExts - OBJECT IDENTIFIER ::= { jnxBgpM2CfgPeerExtensions 2 } - - - -- - -- Peer route reflection configuration - -- - - jnxBgpM2CfgPeerRouteReflectionExts - OBJECT IDENTIFIER ::= { jnxBgpM2CfgPeerNonCapExts 2796 } - - - jnxBgpM2CfgPeerReflectorClientTable OBJECT-TYPE - SYNTAX SEQUENCE OF JnxBgpM2CfgPeerReflectorClientEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "Table of route reflection client settings on a per-peer - basis." - REFERENCE - "RFC 2796 - BGP Route Reflection" - ::= { jnxBgpM2CfgPeerRouteReflectionExts 1 } - - - jnxBgpM2CfgPeerReflectorClientEntry OBJECT-TYPE - SYNTAX JnxBgpM2CfgPeerReflectorClientEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "Entry containing data on a per-peer basis on whether - the peer is configured as a route reflector client." - REFERENCE - "RFC 2796 - BGP Route Reflection" - AUGMENTS { - jnxBgpM2CfgPeerEntry - } - ::= { jnxBgpM2CfgPeerReflectorClientTable 1 } - - - JnxBgpM2CfgPeerReflectorClientEntry ::= SEQUENCE { - jnxBgpM2CfgPeerReflectorClient - INTEGER - } - - jnxBgpM2CfgPeerReflectorClient OBJECT-TYPE - SYNTAX INTEGER { - nonClient(0), - client(1), - meshedClient(2) - } - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "This value indicates whether the given peer is a - reflector client of this router, or not. A value of - nonClient indicates that this peer is not a reflector - client. A value of client indicates that this peer is a - reflector client that is not fully meshed with other - reflector clients. A value of meshedClient indicates - that the peer is a reflector client and is fully meshed - with all other reflector clients. - - This value must be nonClient (0) for BGP external peers." - REFERENCE - "RFC 2796 - BGP Route Reflection" - ::= { jnxBgpM2CfgPeerReflectorClientEntry 1 } - - - -- - -- Peer AS Confederations Extensions - -- - - jnxBgpM2CfgPeerASConfederationExts - OBJECT IDENTIFIER ::= { jnxBgpM2CfgPeerNonCapExts 3065 } - - - jnxBgpM2CfgPeerConfedMemberTable OBJECT-TYPE - SYNTAX SEQUENCE OF JnxBgpM2CfgPeerConfedMemberEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "Table of confederation member settings on a per-peer - basis." - REFERENCE - "RFC 3065 - BGP Confederations" - ::= { jnxBgpM2CfgPeerASConfederationExts 1 } - - - jnxBgpM2CfgPeerConfedMemberEntry OBJECT-TYPE - SYNTAX JnxBgpM2CfgPeerConfedMemberEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "Entry containing data on a per-peer basis on whether - the peer is configured as a BGP confederation member." - REFERENCE - "RFC 3065 - BGP Confederations" - AUGMENTS { - jnxBgpM2CfgPeerEntry -- *** JNX *** - } - ::= { jnxBgpM2CfgPeerConfedMemberTable 1 } - - - JnxBgpM2CfgPeerConfedMemberEntry ::= SEQUENCE { - jnxBgpM2CfgPeerConfedMember - TruthValue - } - - - jnxBgpM2CfgPeerConfedMember OBJECT-TYPE - SYNTAX TruthValue - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "This value indicates whether the given peer is in our - confederation or not." - REFERENCE - "RFC 3065 - BGP Confederations" - ::= { jnxBgpM2CfgPeerConfedMemberEntry 1 } - - - -- - -- BGP NLRI Data - -- - - jnxBgpM2Rib - OBJECT IDENTIFIER ::= { jnxBgpM2 3 } - - - -- - -- NLRI Table - -- - - jnxBgpM2NlriTable OBJECT-TYPE - SYNTAX SEQUENCE OF JnxBgpM2NlriEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "The BGP-4 Received Path Attribute Table contains - information about paths to destination networks - received from all BGP4 peers. Collectively, this - represents the Adj-Ribs-In. The route where - jnxBgpM2NlriBest is TRUE represents, for this NLRI, - the route that is installed in the LocRib from the - Adj-Ribs-In." - ::= { jnxBgpM2Rib 1 } - - - jnxBgpM2NlriEntry OBJECT-TYPE - SYNTAX JnxBgpM2NlriEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "Information about a path to a network." - INDEX { - jnxBgpM2PeerIndex, - jnxBgpM2NlriAfi, - jnxBgpM2NlriSafi, - jnxBgpM2NlriPrefix, - jnxBgpM2NlriPrefixLen, - jnxBgpM2NlriIndex - } - ::= { jnxBgpM2NlriTable 1 } - - - JnxBgpM2NlriEntry ::= SEQUENCE { - jnxBgpM2NlriIndex - Unsigned32, - jnxBgpM2NlriAfi - InetAddressType, - jnxBgpM2NlriSafi - JnxBgpM2Safi, - jnxBgpM2NlriPrefix - InetAddress, - jnxBgpM2NlriPrefixLen - InetAddressPrefixLength, - jnxBgpM2NlriBest - TruthValue, - jnxBgpM2NlriCalcLocalPref - Unsigned32, - jnxBgpM2PathAttrIndex - Unsigned32, - jnxBgpM2NlriOpaqueType - INTEGER, - jnxBgpM2NlriOpaquePointer - RowPointer - } - - - jnxBgpM2NlriIndex OBJECT-TYPE - SYNTAX Unsigned32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "This index allows for multiple instances of a base - prefix for a certain AFI SAFI from a given peer. - This is currently useful for two things: - 1. Allowing for a peer in future implementations to - send more than a single route instance. - 2. Allow for extensions which extend the NLRI field - to send the same prefix while utilizing other - extension specific information. An example of - this is RFC 3107 - Carrying MPLS labels in BGP." - REFERENCE - "RFC 3107 - Carrying Label Information in BGP-4" - ::= { jnxBgpM2NlriEntry 1 } - - - jnxBgpM2NlriAfi OBJECT-TYPE - SYNTAX InetAddressType - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The address family of the prefix for this NLRI." - ::= { jnxBgpM2NlriEntry 2 } - - - jnxBgpM2NlriSafi OBJECT-TYPE - SYNTAX JnxBgpM2Safi - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The subsequent address family of the prefix for - this NLRI" - REFERENCE - "RFC 2858 - Multiprotocol Extensions for BGP-4" - ::= { jnxBgpM2NlriEntry 3 } - - - jnxBgpM2NlriPrefix OBJECT-TYPE - SYNTAX InetAddress (SIZE (4..20)) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "An IP address prefix in the Network Layer - Reachability Information field. This object - is an IP address containing the prefix with - length specified by - jnxBgpM2PathAttrAddrPrefixLen. - Any bits beyond the length specified by - jnxBgpM2PathAttrAddrPrefixLen are zeroed." - ::= { jnxBgpM2NlriEntry 4 } - - - jnxBgpM2NlriPrefixLen OBJECT-TYPE - SYNTAX InetAddressPrefixLength - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "Length in bits of the address prefix in - the Network Layer Reachability Information field." - ::= { jnxBgpM2NlriEntry 5 } - - - jnxBgpM2NlriBest OBJECT-TYPE - SYNTAX TruthValue - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "An indication of whether or not this route - was chosen as the best BGP4 route." - ::= { jnxBgpM2NlriEntry 6 } - - - jnxBgpM2NlriCalcLocalPref OBJECT-TYPE - SYNTAX Unsigned32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The degree of preference calculated by the - receiving BGP4 speaker for an advertised - route." - ::= { jnxBgpM2NlriEntry 7 } - - - jnxBgpM2PathAttrIndex OBJECT-TYPE - SYNTAX Unsigned32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "This value is a unique index for the per-NLRI entry - in the jnxBgpM2PeerAttrTable. It is assigned by the - agent at the point of creation of the jnxBgpM2PeerAttrTable - row entry. While its value is guaranteed to be unique - at any time, it is otherwise opaque to the management - application with respect to its value or the contiguity - of jnxBgpM2PeerAttrIndex row instance values across rows - of the jnxBgpM2PeerAttrTable. It is used to provide an - index structure for other tables whose data is logically - per-peer, per-NLRI." - ::= { jnxBgpM2NlriEntry 8 } - - - jnxBgpM2NlriOpaqueType OBJECT-TYPE - SYNTAX INTEGER { - none(0), - bgpMplsLabelStack(1) - } - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "This object enumerates the type of the row that is - pointed to in the table row jnxBgpM2NlriOpaquePointer - instance, if jnxBgpM2NlriOpaquePointer is in fact not - a zero length. jnxBgpM2NlriOpaqueType is necessary since - the data referenced by jnxBgpM2NlriOpaquePointer is - opaque to BGP. For example, in the case of RFC 3107, - the label stack that is pointed to may occur in the - mplsLabelStackTable from the MPLS-LSR-MIB, and the - instance value of jnxBgpM2NlriOpaqueType would be - bgpMplsLabelStack(1)." - REFERENCE - "RFC 3107 - Carrying Label Information in BGP-4 - draft-ietf-mpls-lsr-mib-08.txt" - ::= { jnxBgpM2NlriEntry 9 } - - - jnxBgpM2NlriOpaquePointer OBJECT-TYPE - SYNTAX RowPointer - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "Pointer to a row that decomposes the data that is - opaque to the BGP MIB but is sent in the NLRI. - This RowPointer has zero (0) length data instance - if jnxBgpM2NlriOpaqueType is none." - ::= { jnxBgpM2NlriEntry 10 } - - - -- - -- Adj-Ribs-Out Table - -- - - jnxBgpM2AdjRibsOutTable OBJECT-TYPE - SYNTAX SEQUENCE OF JnxBgpM2AdjRibsOutEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "This table contains on a per-peer basis one or more - routes from the jnxBgpM2NlriTable that have been - placed in this peer's Adj-Ribs-Out." - REFERENCE - "draft-ietf-idr-bgp4-17.txt, Sec. 3.2" - ::= { jnxBgpM2Rib 2 } - - - jnxBgpM2AdjRibsOutEntry OBJECT-TYPE - SYNTAX JnxBgpM2AdjRibsOutEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "List of BGP routes that have been placed into a - peer's Adj-Ribs-Out." - INDEX { - jnxBgpM2PeerIndex, - jnxBgpM2NlriAfi, - jnxBgpM2NlriSafi, - jnxBgpM2NlriPrefix, - jnxBgpM2NlriPrefixLen, - jnxBgpM2AdjRibsOutIndex - } - ::= { jnxBgpM2AdjRibsOutTable 1 } - - - JnxBgpM2AdjRibsOutEntry ::= SEQUENCE { - jnxBgpM2AdjRibsOutIndex - Unsigned32, - jnxBgpM2AdjRibsOutRoute - RowPointer - } - - - jnxBgpM2AdjRibsOutIndex OBJECT-TYPE - SYNTAX Unsigned32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "Certain extensions to BGP permit multiple instance of - a per afi, per safi prefix to be advertised to a peer. - This object allows the enumeration of them." - ::= { jnxBgpM2AdjRibsOutEntry 1 } - - - jnxBgpM2AdjRibsOutRoute OBJECT-TYPE - SYNTAX RowPointer - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "This object points to the route in the jnxBgpM2NlriTable - that corresponds to the entry in the peer's - Adj-Rib-Out. Outgoing route maps are not - reflected at this point as those are part of the - Update-Send process." - REFERENCE - "draft-ietf-idr-bgp4-17.txt, Sec. 9.2" - ::= { jnxBgpM2AdjRibsOutEntry 2 } - - - -- - -- BGP Rib Path Attributes Table - -- - -- - -- Path Attribute Counter - -- - - jnxBgpM2PathAttrCount OBJECT-TYPE - SYNTAX Counter32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The number of entries in the jnxBgpM2PathAttrTable." - ::= { jnxBgpM2Rib 3 } - - - -- - -- Path Attributes Table - -- - - jnxBgpM2PathAttrTable OBJECT-TYPE - SYNTAX SEQUENCE OF JnxBgpM2PathAttrEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "Provides per advertised network-prefix attribute data, - as advertised over a peering session." - ::= { jnxBgpM2Rib 4 } - - - jnxBgpM2PathAttrEntry OBJECT-TYPE - SYNTAX JnxBgpM2PathAttrEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "Each entry contains data about a given network - prefix, per-prefix and per-advertising peer." - INDEX { - jnxBgpM2PathAttrIndex - } - ::= { jnxBgpM2PathAttrTable 1 } - - - JnxBgpM2PathAttrEntry ::= SEQUENCE { - jnxBgpM2PathAttrOrigin - INTEGER, - jnxBgpM2PathAttrNextHopAddrType - InetAddressType, - jnxBgpM2PathAttrNextHop - InetAddress, - jnxBgpM2PathAttrMedPresent - TruthValue, - jnxBgpM2PathAttrMed - Unsigned32, - jnxBgpM2PathAttrLocalPrefPresent - TruthValue, - jnxBgpM2PathAttrLocalPref - Unsigned32, - jnxBgpM2PathAttrAtomicAggregate - INTEGER, - jnxBgpM2PathAttrAggregatorAS - InetAutonomousSystemNumber, - jnxBgpM2PathAttrAggregatorAddr - JnxBgpM2Identifier, - jnxBgpM2AsPathCalcLength - Unsigned32, - jnxBgpM2AsPathString - SnmpAdminString, - jnxBgpM2AsPathIndex - Unsigned32 - } - - - jnxBgpM2PathAttrOrigin OBJECT-TYPE - SYNTAX INTEGER { - igp(1),-- networks are interior - egp(2),-- networks learned via the EGP protocol - incomplete(3) -- undetermined - } - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The ultimate origin of the path information." - ::= { jnxBgpM2PathAttrEntry 1 } - - - jnxBgpM2PathAttrNextHopAddrType OBJECT-TYPE - SYNTAX InetAddressType - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The address family of the address for - the border router that should be used - to access the destination network." - ::= { jnxBgpM2PathAttrEntry 2 } - - - jnxBgpM2PathAttrNextHop OBJECT-TYPE - SYNTAX InetAddress (SIZE(4..20)) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The address of the border router that - should be used to access the destination - network. This address is the nexthop - address received in the UPDATE packet. - The address family of this object will be the - same as that of the prefix in this row. - - Note that for RFC2545 style double nexthops, - this object will always contain the global scope - nexthop. jnxBgpM2LinkLocalNextHopTable will contain - the linklocal scope nexthop. - - In the case that the mechanism documented in - draft-kato-bgp-ipv6-link-local-00.txt is used and - only a link local nexthop has been sent, , - jnxBgpM2LinkLocalNextHopPresent will be false - and jnxBgpM2PathAttrNextHop will contain the link local - nexthop." - ::= { jnxBgpM2PathAttrEntry 3 } - - - jnxBgpM2PathAttrMedPresent OBJECT-TYPE - SYNTAX TruthValue - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "Whether or not the MED value is present. - If it is not present, the jnxBgpM2PathAttrMed - object has no useful value and should be set to 0." - ::= { jnxBgpM2PathAttrEntry 4 } - - - jnxBgpM2PathAttrMed OBJECT-TYPE - SYNTAX Unsigned32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "This metric is used to discriminate - between multiple exit points to an - adjacent autonomous system." - ::= { jnxBgpM2PathAttrEntry 5 } - - - jnxBgpM2PathAttrLocalPrefPresent OBJECT-TYPE - SYNTAX TruthValue - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "Whether or not the LocalPref value is present. - If it is not present, the jnxBgpM2PathAttrLocalPref - object has no useful value and should be set to 0." - ::= { jnxBgpM2PathAttrEntry 6 } - - - jnxBgpM2PathAttrLocalPref OBJECT-TYPE - SYNTAX Unsigned32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The originating BGP4 speakers degree of - preference for an advertised route." - ::= { jnxBgpM2PathAttrEntry 7 } - - - jnxBgpM2PathAttrAtomicAggregate OBJECT-TYPE - SYNTAX INTEGER { - atomicAggregatePresent(1), - atomicAggregateMissing(2) - } - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "When this object is set to atomicAggregatePresent, - the ATOMIC_AGGREGATE Path Attribute is present - and indicates that the NLRI MUST NOT be made - more specific." - ::= { jnxBgpM2PathAttrEntry 8 } - - - jnxBgpM2PathAttrAggregatorAS OBJECT-TYPE - SYNTAX InetAutonomousSystemNumber - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The AS number of the last BGP4 speaker that - performed route aggregation. A value of - zero (0) indicates the absence of this - attribute. - - Note propagation of AS of zero is illegal in - the Internet." - ::= { jnxBgpM2PathAttrEntry 9 } - jnxBgpM2PathAttrAggregatorAddr OBJECT-TYPE - SYNTAX JnxBgpM2Identifier - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The IP address of the last BGP4 speaker - that performed route aggregation. A - value of 0.0.0.0 indicates the absence - of this attribute." - ::= { jnxBgpM2PathAttrEntry 10 } - - - jnxBgpM2AsPathCalcLength OBJECT-TYPE - SYNTAX Unsigned32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "This value represents the calculated length of the - AS Path according to the rules of the BGP specification. - This value is used in route selection." - REFERENCE - "draft-ietf-idr-bgp4-17.txt, Sec. 9.1.2.2.a" - ::= { jnxBgpM2PathAttrEntry 11 } - - - jnxBgpM2AsPathString OBJECT-TYPE - SYNTAX SnmpAdminString - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "This is a string depicting the autonomous system - path to this network which was received from the - peer which advertised it. The format of the string - is implementation-dependent, and should be designed - for operator readability." - ::= { jnxBgpM2PathAttrEntry 12 } - - - jnxBgpM2AsPathIndex OBJECT-TYPE - SYNTAX Unsigned32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "This value is a unique index for the decomposed AS Path - in the jnxBgpM2AsPathTable. It is assigned by the - agent at the point of creation of the jnxBgpM2AsPathTable - row entry. While its value is guaranteed to be unique - at any time, it is otherwise opaque to the management - application with respect to its value or the contiguity - of jnxBgpM2AsPathIndex row instance values across rows - of the jnxBgpM2AsPathTable." - ::= { jnxBgpM2PathAttrEntry 13 } - - - -- - -- As-4 byte AS_PATH - -- - - jnxBgpM2AsPath4byteTable OBJECT-TYPE - SYNTAX SEQUENCE OF JnxBgpM2AsPath4byteEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "This table is present for BGP speakers that support - the AS 4byte specification and are functioning as - a router between 2-byte and 4-byte AS space." - REFERENCE - "draft-ietf-idr-as4bytes-04.txt - BGP support for - four-octet AS number space" - ::= { jnxBgpM2Rib 5 } - - - jnxBgpM2AsPath4byteEntry OBJECT-TYPE - SYNTAX JnxBgpM2AsPath4byteEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "Each row contains the information for the AS 4-byte - extension's NEW_AS_PATH and NEW_AGGREGATOR attributes." - AUGMENTS { - jnxBgpM2PathAttrEntry - } - ::= { jnxBgpM2AsPath4byteTable 1 } - - - JnxBgpM2AsPath4byteEntry ::= SEQUENCE { - jnxBgpM2AsPath4bytePathPresent - TruthValue, - jnxBgpM2AsPath4byteAggregatorAS - InetAutonomousSystemNumber, - jnxBgpM2AsPath4byteCalcLength - Unsigned32, - jnxBgpM2AsPath4byteString - SnmpAdminString, - jnxBgpM2AsPath4byteIndex - Unsigned32 - } - - - jnxBgpM2AsPath4bytePathPresent OBJECT-TYPE - SYNTAX TruthValue - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "This value may only be true if this BGP Speaker - is functioning as a router between ASs that - are in 2-byte and 4-byte AS space. If this - value is true, then the NEW_AS_PATH attributes - are present and the 4-byte versions of the - appropriate path attributes are in this row. - - If this value is false, then the following values - will be present in the row: - - jnxBgpM2PathAttrAggregatorAS - zero (0). - jnxBgpM2AsPathCalcLength - zero (0). - jnxBgpM2AsPathString - zero (0) length string. - jnxBgpM2AsPathIndex - zero (0)." - ::= { jnxBgpM2AsPath4byteEntry 1 } - - - jnxBgpM2AsPath4byteAggregatorAS OBJECT-TYPE - SYNTAX InetAutonomousSystemNumber - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The NEW_AGGREGATOR AS number of the last BGP4 speaker - that performed route aggregation. A value of - zero (0) indicates the absence of this - attribute. - - Note propagation of AS of zero is illegal in - the Internet." - ::= { jnxBgpM2AsPath4byteEntry 2 } - - - jnxBgpM2AsPath4byteCalcLength OBJECT-TYPE - SYNTAX Unsigned32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "This value represents the calculated length of the - NEW_AS_PATH according to the rules of the BGP specification. - This value is used in route selection." - REFERENCE - "draft-ietf-idr-bgp4-17.txt, Sec. 9.1.2.2.a" - ::= { jnxBgpM2AsPath4byteEntry 3 } - - - jnxBgpM2AsPath4byteString OBJECT-TYPE - SYNTAX SnmpAdminString - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "This is a string depicting the autonomous system - path to this network which was received from the - peer which advertised it. The format of the string - is implementation-dependent, and should be designed - for operator readability." - ::= { jnxBgpM2AsPath4byteEntry 4 } - - - jnxBgpM2AsPath4byteIndex OBJECT-TYPE - SYNTAX Unsigned32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "This value is a unique index for the decomposed AS Path - in the jnxBgpM2AsPathTable. It is assigned by the - agent at the point of creation of the jnxBgpM2AsPathTable - row entry. While its value is guaranteed to be unique - at any time, it is otherwise opaque to the management - application with respect to its value or the contiguity - of jnxBgpM2AsPathIndex row instance values across rows - of the jnxBgpM2AsPathTable. " - ::= { jnxBgpM2AsPath4byteEntry 5 } - - - -- BGP 4 Path attribute AS Path Table. There is one row in - -- this table for each AS which is advertised for a given - -- route as provided from a peer. - --- JMH --- We need one of these for the NewAsPath for the 4byte draft - - jnxBgpM2AsPathTable OBJECT-TYPE - SYNTAX SEQUENCE OF JnxBgpM2AsPathEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "The BGP-4 Path Attribute AS Path Table - contains the per network path (NLRI) - AS PATH data received from the - advertising BGP peer." - ::= { jnxBgpM2Rib 6 } - - - jnxBgpM2AsPathEntry OBJECT-TYPE -- *** JNX *** - SYNTAX JnxBgpM2AsPathEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "Information about an AS path provided with a path to - a network." - INDEX { - jnxBgpM2PathAttrIndex, - jnxBgpM2AsPathSegmentIndex, - jnxBgpM2AsPathElementIndex, - jnxBgpM2AsPathElementValue - } - ::= { jnxBgpM2AsPathTable 1 } - - - JnxBgpM2AsPathEntry ::= SEQUENCE { - jnxBgpM2AsPathSegmentIndex - Unsigned32, - jnxBgpM2AsPathElementIndex - Unsigned32, - jnxBgpM2AsPathType - INTEGER, - jnxBgpM2AsPathElementValue - InetAutonomousSystemNumber - } - - - jnxBgpM2AsPathSegmentIndex OBJECT-TYPE - SYNTAX Unsigned32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "A per-AS path segment index. This will index a set of - autonomous systems in an AS path which are part - of the same sequence or set (as determined by - the row value of jnxBgpM2AsPathType, which - should be the same value for each jnxBgpM2AsPathTable - entry indexed by the same (jnxBgpM2PathAttrIndex, - jnxBgpM2AsPathIndex) pair)." - ::= { jnxBgpM2AsPathEntry 1 } -- *** JNX *** - jnxBgpM2AsPathElementIndex OBJECT-TYPE - SYNTAX Unsigned32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "A per-AS element index. This will index a particular - AS within a sequence or set of autonomous systems in - an AS path." - ::= { jnxBgpM2AsPathEntry 2 } -- *** JNX *** - - - jnxBgpM2AsPathType OBJECT-TYPE - SYNTAX INTEGER { - asSet(1), - asSequence(2), - confedSequence(3), - confedSet(4) - } - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The type of sequence in which this asPath - was advertised as an attribute. Note that - all asPath row instances for a given (jnxBgpM2PathAttrIndex, - jnxBgpM2AsPathIndex) index pair will have their - jnxBgpM2AsPathType set to the same value. - The values for jnxBgpM2AsPathType are - interpreted as defined in the base BGP document - and the BGP AS Confederations document." - REFERENCE - "draft-ietf-idr-bgp4-16 - RFC 3065 - BGP AS Confederations" - ::= { jnxBgpM2AsPathEntry 3 } -- *** JNX *** - - - jnxBgpM2AsPathElementValue OBJECT-TYPE - SYNTAX InetAutonomousSystemNumber - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "An AS value for an AS the related NLRI traversed - in the propagation of its advertisement. This - value is to be interpreted in the context of the - sequence implied by jnxBgpM2AsPathIndex and - jnxBgpM2AsPathType (and, in sequence of the - other table rows with the same value of - jnxBgpM2PathAttrIndex and jnxBgpM2AsPathIndex)." - ::= { jnxBgpM2AsPathEntry 4 } -- *** JNX *** - - - -- BGP 4 Path unknown attribute. There is one row in - -- this table for each attribute not known by this BGP - -- implementation (or agent instrumentation), but provided - -- from a peer. - - jnxBgpM2PathAttrUnknownTable OBJECT-TYPE - SYNTAX SEQUENCE OF JnxBgpM2PathAttrUnknownEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "The BGP-4 Path Attribute Unknown Table - contains the per network path (NLRI) - data on the path attributes advertised - with a route but not known to the local BGP implementation - or not otherwise capable of being returned from this agent. - - The absence of row data for a given index value for - jnxBgpM2PathAttrIndex indicates a lack of such unknown - attribute information for the indicated network path - (as indexed by that jnxBgpM2PathAttrIndex value in the - jnxBgpM2PathAttrTable)." - ::= { jnxBgpM2Rib 7 } - - - jnxBgpM2PathAttrUnknownEntry OBJECT-TYPE - SYNTAX JnxBgpM2PathAttrUnknownEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "Information about an unknown attribute - provided with a path to a network." - INDEX { - jnxBgpM2PathAttrIndex, - jnxBgpM2PathAttrUnknownIndex - } - ::= { jnxBgpM2PathAttrUnknownTable 1 } - - - JnxBgpM2PathAttrUnknownEntry ::= SEQUENCE { - jnxBgpM2PathAttrUnknownIndex - Unsigned32, - jnxBgpM2PathAttrUnknownType - Unsigned32, - jnxBgpM2PathAttrUnknownValue - OCTET STRING - } - jnxBgpM2PathAttrUnknownIndex OBJECT-TYPE - SYNTAX Unsigned32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "An integer index for a row in this table." - ::= { jnxBgpM2PathAttrUnknownEntry 1 } - - - jnxBgpM2PathAttrUnknownType OBJECT-TYPE - SYNTAX Unsigned32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The attribute type advertised with this unknown - attribute by the peer." - ::= { jnxBgpM2PathAttrUnknownEntry 2 } - - - -- Maximum size of the following is derived as - -- 4096 max message size - -- - 16 BGP message marker bytes - -- - 2 BGP message size - -- - 1 BGP message type (UPDATE with unknown attr) - -- - 2 UPDATE routes length (even assuming no routes) - -- - 2 UPDATE path attributes length - -- - 1 path attribute flag octet - -- - 2 unknown path attr type (in jnxBgpM2PathAttrUnknownType) - -- --------- - -- 4070 bytes maximum per-message attribute value data - - - jnxBgpM2PathAttrUnknownValue OBJECT-TYPE - SYNTAX OCTET STRING (SIZE(0..4070)) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "Value of path attribute not understood - by the base BGP-4 document. - - Octets beyond the maximum size, if any, - are not recorded by this row object. " - ::= { jnxBgpM2PathAttrUnknownEntry 3 } - - - -- - -- Path Attribute Extensions - -- - jnxBgpM2PathAttrExtensions - OBJECT IDENTIFIER ::= { jnxBgpM2Rib 8 } - - - jnxBgpM2PathAttrNonCapExts - OBJECT IDENTIFIER ::= { jnxBgpM2PathAttrExtensions 1 } - - - jnxBgpM2PathAttrCapExts - OBJECT IDENTIFIER ::= { jnxBgpM2PathAttrExtensions 2 } - - - -- - -- Path Attribute Route Reflection Extensions - -- - - -- - -- Originator ID Table - -- - - jnxBgpM2PathAttrRouteReflectionExts - OBJECT IDENTIFIER ::= { jnxBgpM2PathAttrNonCapExts 2796 } - - - jnxBgpM2PathAttrOriginatorIdTable OBJECT-TYPE - SYNTAX SEQUENCE OF JnxBgpM2PathAttrOriginatorIdEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "Per prefix data pertinent to advertisement of a - network prefix through an originator." - REFERENCE - "RFC 2796 - BGP Route Reflection" - ::= { jnxBgpM2PathAttrRouteReflectionExts 1 } - - - jnxBgpM2PathAttrOriginatorIdEntry OBJECT-TYPE - SYNTAX JnxBgpM2PathAttrOriginatorIdEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "Each entry contains data pertinent to a network - prefix as received through its originating BGP - route reflector." - REFERENCE - "RFC 2796 - BGP Route Reflection" - INDEX { - jnxBgpM2PathAttrIndex - } - ::= { jnxBgpM2PathAttrOriginatorIdTable 1 } - - - JnxBgpM2PathAttrOriginatorIdEntry ::= SEQUENCE { - jnxBgpM2PathAttrOriginatorId - JnxBgpM2Identifier - } - - - jnxBgpM2PathAttrOriginatorId OBJECT-TYPE - SYNTAX JnxBgpM2Identifier - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The Originator-ID identifying the router that initially - advertised this destination to a Route Reflector. A - value of 0.0.0.0 indicates the absence of this attribute." - REFERENCE - "This attribute is defined in [RFC2796]." - ::= { jnxBgpM2PathAttrOriginatorIdEntry 1 } - - - -- - -- Cluster table - -- - - jnxBgpM2PathAttrClusterTable OBJECT-TYPE - SYNTAX SEQUENCE OF JnxBgpM2PathAttrClusterEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "The BGP-4 Path Attribute Cluster Table - contains the per network path (NLRI) - data on the reflection path which a - route has traversed. The absence of row - data for a given index value for jnxBgpM2PathAttrIndex - indicates a lack of this attribute information - for the indicated network path (as indexed by - that jnxBgpM2PathAttrIndex value in the jnxBgpM2PathAttrTable)." - ::= { jnxBgpM2PathAttrRouteReflectionExts 2 } - - - jnxBgpM2PathAttrClusterEntry OBJECT-TYPE - SYNTAX JnxBgpM2PathAttrClusterEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "Information about a cluster traversal - provided with a path to a network." - INDEX { - jnxBgpM2PathAttrIndex, - jnxBgpM2PathAttrClusterIndex - } - ::= { jnxBgpM2PathAttrClusterTable 1 } - - - JnxBgpM2PathAttrClusterEntry ::= SEQUENCE { - jnxBgpM2PathAttrClusterIndex - Unsigned32, - jnxBgpM2PathAttrClusterValue - JnxBgpM2Identifier - } - - - jnxBgpM2PathAttrClusterIndex OBJECT-TYPE - SYNTAX Unsigned32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "An integral index for a row in this table." - ::= { jnxBgpM2PathAttrClusterEntry 1 } - - - jnxBgpM2PathAttrClusterValue OBJECT-TYPE - SYNTAX JnxBgpM2Identifier - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "A four octet long value representing a part of the - reflection path that the route has passed. Each such four - octet long value represents the ID of a cluster that - the route has traversed. The sequence of this path as - received in the route advertisement will be preserved in - the sequence of jnxBgpM2PathAttrClusterTable rows (and the - jnxBgpM2PathAttrClusterValues in each row) as returned for - a given jnxBgpM2PathAttrIndex value, and the monotonically - increasing sequence of jnxBgpM2PathAttrClusterIndex values - for that jnxBgpM2PathAttrIndex." - REFERENCE - "This attribute is defined in [RFC2796]." - ::= { jnxBgpM2PathAttrClusterEntry 2 } - - - -- - -- BGP Communities - -- - - jnxBgpM2PathAttrCommunityExts - OBJECT IDENTIFIER ::= { jnxBgpM2PathAttrNonCapExts 1997 } - - - jnxBgpM2PathAttrCommTable OBJECT-TYPE - SYNTAX SEQUENCE OF JnxBgpM2PathAttrCommEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "The BGP-4 Path Attribute Community Table - contains the per network path (NLRI) - data on the community membership advertised - with a route. The absence of row - data for a given index value for jnxBgpM2PathAttrIndex - indicates a lack of this attribute information - for the indicated network path (as indexed by - that jnxBgpM2PathAttrIndex value in the jnxBgpM2PathAttrTable)." - ::= { jnxBgpM2PathAttrCommunityExts 1 } - - - jnxBgpM2PathAttrCommEntry OBJECT-TYPE - SYNTAX JnxBgpM2PathAttrCommEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "Information about a community association - provided with a path to a network." - INDEX { - jnxBgpM2PathAttrIndex, - jnxBgpM2PathAttrCommIndex - } - ::= { jnxBgpM2PathAttrCommTable 1 } - - - JnxBgpM2PathAttrCommEntry ::= SEQUENCE { - jnxBgpM2PathAttrCommIndex - Unsigned32, - jnxBgpM2PathAttrCommValue - JnxBgpM2Community - } - - - jnxBgpM2PathAttrCommIndex OBJECT-TYPE - SYNTAX Unsigned32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "An integer index for a row in this table." - ::= { jnxBgpM2PathAttrCommEntry 1 } - - - jnxBgpM2PathAttrCommValue OBJECT-TYPE - SYNTAX JnxBgpM2Community - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "A value representing a community. There are certain - 4-octet long values which could be returned in this - columnar row data that carry additional semantics." - REFERENCE - "RFC 1997 - BGP Communities Attribute" - ::= { jnxBgpM2PathAttrCommEntry 2 } - - - -- - -- BGP Extended Communities - -- - - jnxBgpM2PathAttrExtCommTable OBJECT-TYPE - SYNTAX SEQUENCE OF JnxBgpM2PathAttrExtCommEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "The BGP-4 Path Attribute Community Table - contains the per network path (NLRI) - data on the extended community membership advertised - with a route. The absence of row - data for a given index value for jnxBgpM2PathAttrIndex - indicates a lack of this attribute information - for the indicated network path (as indexed by - that jnxBgpM2PathAttrIndex value in the jnxBgpM2PathAttrTable). - - XXX JMH - can not assign the OID until an RFC is published." - ::= { jnxBgpM2PathAttrNonCapExts 65001 } -- *** JNX *** - - - jnxBgpM2PathAttrExtCommEntry OBJECT-TYPE - SYNTAX JnxBgpM2PathAttrExtCommEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "Information about an extended community association - provided with a path to a network." - INDEX { - jnxBgpM2PathAttrIndex, - jnxBgpM2PathAttrExtCommIndex - } - ::= { jnxBgpM2PathAttrExtCommTable 1 } - - - JnxBgpM2PathAttrExtCommEntry ::= SEQUENCE { - jnxBgpM2PathAttrExtCommIndex - Unsigned32, - jnxBgpM2PathAttrExtCommValue - JnxBgpM2ExtendedCommunity - } - - - jnxBgpM2PathAttrExtCommIndex OBJECT-TYPE - SYNTAX Unsigned32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "An integral index for a row in this table." - ::= { jnxBgpM2PathAttrExtCommEntry 1 } - - - jnxBgpM2PathAttrExtCommValue OBJECT-TYPE - SYNTAX JnxBgpM2ExtendedCommunity - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "A value representing an extended community which was - received with the route implied by the jnxBgpM2PathAttr - Index value of this row data. There are certain - 8-octet long values which could be returned in this - columnar row data that carry additional semantics." - REFERENCE - "BGP-EXTCOMM - BGP Extended Communities Attribute" - ::= { jnxBgpM2PathAttrExtCommEntry 2 } - - - -- - -- RFC 2545 link local nexthop - -- - - jnxBgpM2LinkLocalNextHopTable OBJECT-TYPE - SYNTAX SEQUENCE OF JnxBgpM2LinkLocalNextHopEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "Table of link local nexthops as sent by RFC 2545 - for IPv6 BGP Speakers." - REFERENCE - "RFC 2545 - Use of BGP-4 Multiprotocol Extensions - for IPv6 Inter-Domain Routing" - ::= { jnxBgpM2PathAttrNonCapExts 2545 } - - - jnxBgpM2LinkLocalNextHopEntry OBJECT-TYPE - SYNTAX JnxBgpM2LinkLocalNextHopEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "Entry containing the link-local nexthops as sent - by a BGP speaker running RFC 2545 extensions for - double-nexthops." - INDEX { - jnxBgpM2PathAttrIndex - } - ::= { jnxBgpM2LinkLocalNextHopTable 1 } - - - JnxBgpM2LinkLocalNextHopEntry ::= SEQUENCE { - jnxBgpM2LinkLocalNextHopPresent - TruthValue, - jnxBgpM2LinkLocalNextHop - InetAddress - } - - - jnxBgpM2LinkLocalNextHopPresent OBJECT-TYPE - SYNTAX TruthValue - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "This value is TRUE if and only if the BGP - speaker is receiving IPv6 NLRI using the - RFC 2545 double nexthop convention and it - has received a link local scope nexthop in - addition to the global scope nexthop." - ::= { jnxBgpM2LinkLocalNextHopEntry 1 } - - - jnxBgpM2LinkLocalNextHop OBJECT-TYPE - SYNTAX InetAddress (SIZE(20)) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "This value contains an IPv6 link local address of - InetAddressType of type ipv6z. This value is only - present if jnxBgpM2LinkLocalNextHopPresent is true." - ::= { jnxBgpM2LinkLocalNextHopEntry 2 } - - - -- - -- Conformance Information - -- - - jnxBgpM2Conformance - OBJECT IDENTIFIER ::= { jnxBgpM2 4 } - - - jnxBgpM2MIBCompliances OBJECT IDENTIFIER ::= - { jnxBgpM2Conformance 1 } - - - jnxBgpM2MIBGroups OBJECT IDENTIFIER ::= - { jnxBgpM2Conformance 2 } - - - jnxBgpM2MIBCompliance MODULE-COMPLIANCE - STATUS current - DESCRIPTION - "The compliance statement for entities which - implement the BGP4 mib." - MODULE -- this module - MANDATORY-GROUPS { - jnxBgpM2TimersGroup, - jnxBgpM2CountersGroup, - jnxBgpM2CapabilitiesGroup, -- *** JNX *** - jnxBgpM2AsPathGroup, - jnxBgpM2As4byteGroup, - jnxBgpM2BaseGroup, - jnxBgpM2ErrorsGroup, - jnxBgpM2PeerGroup, - jnxBgpM2PathAttributesGroup - } - GROUP jnxBgpM2MIBNotificationsGroup - DESCRIPTION - "The notifications group is completely optional, - but highly recommended." - GROUP jnxBgpM2AuthenticationGroup - DESCRIPTION - "The authentication group is - mandatory only for those implementations which - support sending and receiving authentication - information with peers in the BGP Authentication - Field." - GROUP jnxBgpM2CommunitiesGroup - DESCRIPTION - "The communities group is mandatory only for those - which support the BGP community attribute." - GROUP jnxBgpM2ExtCommunitiesGroup - DESCRIPTION - "The communities group is mandatory only for those - which support the BGP extended community attribute." - GROUP jnxBgpM2RouteReflectionGroup - DESCRIPTION - "The communities group is mandatory only for those - which support the BGP route reflection relationships." - GROUP jnxBgpM2AsConfederationGroup - DESCRIPTION - "The communities group is mandatory only for those - which support the BGP confederation membership." --- *** JNX *** GROUP jnxBgpM2TimersGroup --- *** JNX *** DESCRIPTION --- *** JNX *** "This group is mandatory for all agent implementations." --- *** JNX *** GROUP jnxBgpM2CountersGroup --- *** JNX *** DESCRIPTION --- *** JNX *** "This group is mandatory for all agent implementations." --- *** JNX *** GROUP jnxBgpM2CapabilitiesGroup --- *** JNX *** DESCRIPTION --- *** JNX *** "This group is mandatory for all agent implementations." --- *** JNX *** GROUP jnxBgpM2AsPathGroup --- *** JNX *** DESCRIPTION --- *** JNX *** "This group is mandatory for all agent implementations." --- *** JNX *** GROUP jnxBgpM2As4byteGroup --- *** JNX *** DESCRIPTION --- *** JNX *** "This group is mandatory for all agent implementations." --- *** JNX *** GROUP jnxBgpM2BaseGroup --- *** JNX *** DESCRIPTION --- *** JNX *** "This group is mandatory for all agent implementations." --- *** JNX *** GROUP jnxBgpM2ErrorsGroup --- *** JNX *** DESCRIPTION --- *** JNX *** "This group is mandatory for all agent implementations." --- *** JNX *** GROUP jnxBgpM2PeerGroup --- *** JNX *** DESCRIPTION --- *** JNX *** "This group is mandatory for all agent implementations." --- *** JNX *** GROUP jnxBgpM2PathAttributesGroup --- *** JNX *** DESCRIPTION --- *** JNX *** "This group is mandatory for all agent implementations." - GROUP jnxBgpM2PeerConfigurationGroup - DESCRIPTION - "This group is optional for implementations that wish to - support configuration via SNMP." - GROUP jnxBgpM2PeerAuthConfigurationGroup - DESCRIPTION - "This group is optional for implementations that wish to - support configuration of BGP authentication via SNMP. - Implementation of this feature requires support of the - jnxBgpM2PeerConfigurationGroup." - GROUP jnxBgpM2PeerRouteReflectorCfgGroup - DESCRIPTION - "This group is optional for implementations that wish to - support configuration of route reflection via SNMP. - Implementation of this feature requires support of the - jnxBgpM2PeerConfigurationGroup." - GROUP jnxBgpM2PeerAsConfederationCfgGroup - DESCRIPTION - "This group is optional for implementations that wish to - support configuration of BGP AS Confederations via SNMP. - Implementation of this feature requires support of the - jnxBgpM2PeerConfigurationGroup." - GROUP jnxBgpM2Rfc2545Group - DESCRIPTION - "This group is required for peers that support exchanging - of IPv6 NLRI per RFC 2545." - ::= { jnxBgpM2MIBCompliances 1 } - - - jnxBgpM2AuthenticationGroup OBJECT-GROUP - OBJECTS { - jnxBgpM2SupportedAuthCode, - jnxBgpM2SupportedAuthValue, - jnxBgpM2PeerAuthSent, - jnxBgpM2PeerAuthSentCode, - jnxBgpM2PeerAuthSentValue, - jnxBgpM2PeerAuthRcvd, - jnxBgpM2PeerAuthRcvdCode, - jnxBgpM2PeerAuthRcvdValue - } - STATUS current - DESCRIPTION - "Objects associated with BGP authentication." - ::= { jnxBgpM2MIBGroups 1 } - - - jnxBgpM2CommunitiesGroup OBJECT-GROUP - OBJECTS { - jnxBgpM2PathAttrCommIndex, - jnxBgpM2PathAttrCommValue - } - STATUS current - DESCRIPTION - "Objects associated with BGP communities." - ::= { jnxBgpM2MIBGroups 2 } - - - jnxBgpM2ExtCommunitiesGroup OBJECT-GROUP - OBJECTS { - jnxBgpM2PathAttrExtCommIndex, - jnxBgpM2PathAttrExtCommValue - } - STATUS current - DESCRIPTION - "Objects associated with BGP extended communities." - ::= { jnxBgpM2MIBGroups 3 } - - - jnxBgpM2RouteReflectionGroup OBJECT-GROUP - OBJECTS { - jnxBgpM2RouteReflector, - jnxBgpM2ClusterId, - jnxBgpM2PeerReflectorClient, - jnxBgpM2PathAttrOriginatorId, - jnxBgpM2PathAttrClusterIndex, - jnxBgpM2PathAttrClusterValue - } - STATUS current - DESCRIPTION - "Objects associated with BGP route reflection." - ::= { jnxBgpM2MIBGroups 4 } - - - jnxBgpM2AsConfederationGroup OBJECT-GROUP - OBJECTS { - jnxBgpM2ConfederationRouter, - jnxBgpM2ConfederationId, - jnxBgpM2PeerConfedMember - } - STATUS current - DESCRIPTION - "Objects associated with BGP confederation membership." - ::= { jnxBgpM2MIBGroups 5 } - - - jnxBgpM2TimersGroup OBJECT-GROUP - OBJECTS { - jnxBgpM2PeerFsmEstablishedTime, - jnxBgpM2PeerInUpdatesElapsedTime, - jnxBgpM2PeerConnectRetryInterval, - jnxBgpM2PeerHoldTimeConfigured, - jnxBgpM2PeerKeepAliveConfigured, - jnxBgpM2PeerMinASOrigInterval, - jnxBgpM2PeerMinRouteAdverInterval, - jnxBgpM2PeerHoldTime, - jnxBgpM2PeerKeepAlive - } - STATUS current - DESCRIPTION - "Objects associated with BGP peering timers." - ::= { jnxBgpM2MIBGroups 6 } - - - jnxBgpM2CountersGroup OBJECT-GROUP - OBJECTS { - jnxBgpM2PeerInUpdates, - jnxBgpM2PeerOutUpdates, - jnxBgpM2PeerInTotalMessages, - jnxBgpM2PeerOutTotalMessages, - jnxBgpM2PeerFsmEstablishedTrans, - jnxBgpM2PrefixCountersAfi, - jnxBgpM2PrefixCountersSafi, - jnxBgpM2PrefixInPrefixes, - jnxBgpM2PrefixInPrefixesAccepted, - jnxBgpM2PrefixInPrefixesRejected, - jnxBgpM2PrefixOutPrefixes - } - STATUS current - DESCRIPTION - "Objects to count discrete events and exchanges on BGP - sessions." - ::= { jnxBgpM2MIBGroups 7 } - - - jnxBgpM2CapabilitiesGroup OBJECT-GROUP - OBJECTS { - jnxBgpM2CapabilitySupportAvailable, - jnxBgpM2SupportedCapabilityCode, - jnxBgpM2SupportedCapability, - jnxBgpM2PeerCapAnnouncedCode, - jnxBgpM2PeerCapAnnouncedIndex, - jnxBgpM2PeerCapAnnouncedValue, - jnxBgpM2PeerCapReceivedCode, - jnxBgpM2PeerCapReceivedIndex, - jnxBgpM2PeerCapReceivedValue - } - STATUS current - DESCRIPTION - "Objects to report capabilities as received on BGP - sessions." - ::= { jnxBgpM2MIBGroups 8 } - - - jnxBgpM2AsPathGroup OBJECT-GROUP - OBJECTS { - jnxBgpM2AsPathSegmentIndex, - jnxBgpM2AsPathElementIndex, - jnxBgpM2AsPathType, - jnxBgpM2AsPathElementValue - } - STATUS current - DESCRIPTION - "Objects to report AS paths received on BGP NLRIs." - ::= { jnxBgpM2MIBGroups 9 } - - - jnxBgpM2As4byteGroup OBJECT-GROUP - OBJECTS { - jnxBgpM2AsSize, - jnxBgpM2AsPath4bytePathPresent, - jnxBgpM2AsPath4byteAggregatorAS, - jnxBgpM2AsPath4byteCalcLength, - jnxBgpM2AsPath4byteString, - jnxBgpM2AsPath4byteIndex - } - STATUS current - DESCRIPTION - "AS Size objects." - ::= { jnxBgpM2MIBGroups 10 } - - - jnxBgpM2BaseGroup OBJECT-GROUP - OBJECTS { - jnxBgpM2LocalAs, - jnxBgpM2LocalIdentifier, - jnxBgpM2VersionIndex, - jnxBgpM2VersionSupported - } - STATUS current - DESCRIPTION - "Basic objects in local BGP implementation." - ::= { jnxBgpM2MIBGroups 11 } - - - jnxBgpM2ErrorsGroup OBJECT-GROUP - OBJECTS { - jnxBgpM2PeerLastErrorReceived, - jnxBgpM2PeerLastErrorReceivedData, - jnxBgpM2PeerLastErrorReceivedTime, - jnxBgpM2PeerLastErrorReceivedText, - jnxBgpM2PeerLastErrorSent, - jnxBgpM2PeerLastErrorSentData, - jnxBgpM2PeerLastErrorSentTime, - jnxBgpM2PeerLastErrorSentText - } - STATUS current - DESCRIPTION - "Errors received on BGP peering sessions." - ::= { jnxBgpM2MIBGroups 12 } - - - jnxBgpM2PeerGroup OBJECT-GROUP - OBJECTS { - jnxBgpM2PeerIdentifier, - jnxBgpM2PeerState, - jnxBgpM2PeerStatus, - jnxBgpM2PeerConfiguredVersion, - jnxBgpM2PeerNegotiatedVersion, - jnxBgpM2PeerLocalAddrType, - jnxBgpM2PeerLocalAddr, - jnxBgpM2PeerLocalPort, - jnxBgpM2PeerLocalAs, - jnxBgpM2PeerRemoteAddrType, - jnxBgpM2PeerRemoteAddr, - jnxBgpM2PeerRemotePort, - jnxBgpM2PeerRemoteAs, - jnxBgpM2PeerRoutingInstance, -- *** JNX *** - jnxBgpM2PeerIndex - } - STATUS current - DESCRIPTION - "Core object types on BGP peering sessions." - ::= { jnxBgpM2MIBGroups 13 } - - - jnxBgpM2PathAttributesGroup OBJECT-GROUP - OBJECTS { - jnxBgpM2PathAttrCount, - jnxBgpM2AsPathCalcLength, - jnxBgpM2AsPathElementValue, - jnxBgpM2AsPathIndex, - jnxBgpM2AsPathString, - jnxBgpM2AsPathType, - jnxBgpM2NlriAfi, - jnxBgpM2NlriBest, - jnxBgpM2NlriPrefix, - jnxBgpM2NlriPrefixLen, - jnxBgpM2NlriSafi, - jnxBgpM2NlriOpaqueType, - jnxBgpM2NlriOpaquePointer, - jnxBgpM2NlriIndex, - jnxBgpM2NlriCalcLocalPref, - jnxBgpM2AdjRibsOutIndex, - jnxBgpM2AdjRibsOutRoute, - jnxBgpM2PathAttrAggregatorAS, - jnxBgpM2PathAttrAggregatorAddr, - jnxBgpM2PathAttrAtomicAggregate, - jnxBgpM2PathAttrIndex, - jnxBgpM2PathAttrLocalPref, - jnxBgpM2PathAttrLocalPrefPresent, - jnxBgpM2PathAttrMed, - jnxBgpM2PathAttrMedPresent, - jnxBgpM2PathAttrNextHop, - jnxBgpM2PathAttrNextHopAddrType, - jnxBgpM2PathAttrOrigin, - jnxBgpM2PathAttrUnknownIndex, - jnxBgpM2PathAttrUnknownType, - jnxBgpM2PathAttrUnknownValue - } - STATUS current - DESCRIPTION - "Attributes received on BGP peering sessions." - ::= { jnxBgpM2MIBGroups 14 } - - jnxBgpM2PeerConfigurationGroup OBJECT-GROUP - OBJECTS { - jnxBgpM2CfgBaseScalarStorageType, - jnxBgpM2CfgLocalAs, - jnxBgpM2CfgLocalIdentifier, - jnxBgpM2CfgPeerAdminStatus, - jnxBgpM2CfgPeerNextIndex, - jnxBgpM2CfgPeerConfiguredVersion, - jnxBgpM2CfgAllowVersionNegotiation, - jnxBgpM2CfgPeerLocalAddrType, - jnxBgpM2CfgPeerLocalAddr, - jnxBgpM2CfgPeerLocalAs, - jnxBgpM2CfgPeerRemoteAddrType, - jnxBgpM2CfgPeerRemoteAddr, - jnxBgpM2CfgPeerRemotePort, - jnxBgpM2CfgPeerRemoteAs, - jnxBgpM2CfgPeerEntryStorageType, - jnxBgpM2CfgPeerError, - jnxBgpM2CfgPeerBgpPeerEntry, - jnxBgpM2CfgPeerRowEntryStatus, --- jnxBgpM2CfgPeerIndex, *** JNX *** - jnxBgpM2CfgPeerStatus, - jnxBgpM2CfgPeerConnectRetryInterval, - jnxBgpM2CfgPeerHoldTimeConfigured, - jnxBgpM2CfgPeerKeepAliveConfigured, - jnxBgpM2CfgPeerMinASOrigInterval, - jnxBgpM2CfgPeerMinRouteAdverInter - } - STATUS current - DESCRIPTION - "Configuration objects for BGP peers." - ::= { jnxBgpM2MIBGroups 15 } - - - jnxBgpM2PeerAuthConfigurationGroup OBJECT-GROUP - OBJECTS { - jnxBgpM2CfgPeerAuthEnabled, - jnxBgpM2CfgPeerAuthCode, - jnxBgpM2CfgPeerAuthValue - } - STATUS current - DESCRIPTION - "Configuration objects for BGP peers that support - authentication." - ::= { jnxBgpM2MIBGroups 16 } - - - jnxBgpM2PeerRouteReflectorCfgGroup OBJECT-GROUP - OBJECTS { - jnxBgpM2CfgRouteReflector, - jnxBgpM2CfgClusterId, - jnxBgpM2CfgPeerReflectorClient - } - STATUS current - DESCRIPTION - "Configuration objects for BGP peers that support route - reflection." - ::= { jnxBgpM2MIBGroups 17 } - - - jnxBgpM2PeerAsConfederationCfgGroup OBJECT-GROUP - OBJECTS { - jnxBgpM2CfgConfederationRouter, - jnxBgpM2CfgConfederationId, - jnxBgpM2CfgPeerConfedMember - } - STATUS current - DESCRIPTION - "Configuration objects for BGP peers that support BGP - confederations." - ::= { jnxBgpM2MIBGroups 18 } - - - jnxBgpM2MIBNotificationsGroup NOTIFICATION-GROUP - NOTIFICATIONS { - jnxBgpM2Established, - jnxBgpM2BackwardTransition - } - STATUS current - DESCRIPTION - "This group contains objects for notifications - supported by this mib module." - ::= { jnxBgpM2MIBGroups 19 } - - - jnxBgpM2Rfc2545Group OBJECT-GROUP - OBJECTS { - jnxBgpM2LinkLocalNextHopPresent, - jnxBgpM2LinkLocalNextHop - } - STATUS current - DESCRIPTION - "This group is required for peers that support exchanging - of IPv6 NLRI per RFC 2545." - ::= { jnxBgpM2MIBGroups 20 } - -END