diff --git a/mibs/radlan/rlaaa.mib b/mibs/RADLAN-AAA similarity index 100% rename from mibs/radlan/rlaaa.mib rename to mibs/RADLAN-AAA diff --git a/mibs/radlan/rlrs232.mib b/mibs/RADLAN-BaudRate-MIB similarity index 100% rename from mibs/radlan/rlrs232.mib rename to mibs/RADLAN-BaudRate-MIB diff --git a/mibs/radlan/rlcopy.mib b/mibs/RADLAN-COPY-MIB similarity index 100% rename from mibs/radlan/rlcopy.mib rename to mibs/RADLAN-COPY-MIB diff --git a/mibs/radlan/rldnscl.mib b/mibs/RADLAN-DNSCL-MIB similarity index 100% rename from mibs/radlan/rldnscl.mib rename to mibs/RADLAN-DNSCL-MIB diff --git a/mibs/radlan/rlfile.mib b/mibs/RADLAN-File similarity index 100% rename from mibs/radlan/rlfile.mib rename to mibs/RADLAN-File diff --git a/mibs/radlan/env_mib.mib b/mibs/RADLAN-HWENVIROMENT similarity index 100% rename from mibs/radlan/env_mib.mib rename to mibs/RADLAN-HWENVIROMENT diff --git a/mibs/radlan/rlip.mib b/mibs/RADLAN-IP similarity index 100% rename from mibs/radlan/rlip.mib rename to mibs/RADLAN-IP diff --git a/mibs/radlan/rllldp.mib b/mibs/RADLAN-LLDP-MIB similarity index 100% rename from mibs/radlan/rllldp.mib rename to mibs/RADLAN-LLDP-MIB diff --git a/mibs/radlan/rllocalization.mib b/mibs/RADLAN-LOCALIZATION-MIB similarity index 100% rename from mibs/radlan/rllocalization.mib rename to mibs/RADLAN-LOCALIZATION-MIB diff --git a/mibs/radlan/macbaseprio.mib b/mibs/RADLAN-MAC-BASE-PRIO similarity index 100% rename from mibs/radlan/macbaseprio.mib rename to mibs/RADLAN-MAC-BASE-PRIO diff --git a/mibs/radlan/mnginf.mib b/mibs/RADLAN-MNGINF-MIB similarity index 100% rename from mibs/radlan/mnginf.mib rename to mibs/RADLAN-MNGINF-MIB diff --git a/mibs/radlan/rlphy.mib b/mibs/RADLAN-PHY-MIB similarity index 100% rename from mibs/radlan/rlphy.mib rename to mibs/RADLAN-PHY-MIB diff --git a/mibs/radlan/rlphysdescription.mib b/mibs/RADLAN-Physicaldescription-MIB similarity index 100% rename from mibs/radlan/rlphysdescription.mib rename to mibs/RADLAN-Physicaldescription-MIB diff --git a/mibs/radlan/qosclimib.mib b/mibs/RADLAN-QOS-CLI-MIB similarity index 100% rename from mibs/radlan/qosclimib.mib rename to mibs/RADLAN-QOS-CLI-MIB diff --git a/mibs/radlan/rlqosserv.mib b/mibs/RADLAN-QOS-SERV similarity index 100% rename from mibs/radlan/rlqosserv.mib rename to mibs/RADLAN-QOS-SERV diff --git a/mibs/radlan/rlrmon.mib b/mibs/RADLAN-RMON similarity index 100% rename from mibs/radlan/rlrmon.mib rename to mibs/RADLAN-RMON diff --git a/mibs/radlan/rl_sensor.mib b/mibs/RADLAN-SENSORENTMIB similarity index 100% rename from mibs/radlan/rl_sensor.mib rename to mibs/RADLAN-SENSORENTMIB diff --git a/mibs/radlan/rlsnmp.mib b/mibs/RADLAN-SNMP-MIB similarity index 100% rename from mibs/radlan/rlsnmp.mib rename to mibs/RADLAN-SNMP-MIB diff --git a/mibs/radlan/rlsnmpv2.txt b/mibs/RADLAN-SNMPv2 similarity index 100% rename from mibs/radlan/rlsnmpv2.txt rename to mibs/RADLAN-SNMPv2 diff --git a/mibs/radlan/rlssh.mib b/mibs/RADLAN-SSH-MIB similarity index 100% rename from mibs/radlan/rlssh.mib rename to mibs/RADLAN-SSH-MIB diff --git a/mibs/radlan/rlssl.mib b/mibs/RADLAN-SSL similarity index 100% rename from mibs/radlan/rlssl.mib rename to mibs/RADLAN-SSL diff --git a/mibs/radlan/rlstack.mib b/mibs/RADLAN-STACK-MIB similarity index 100% rename from mibs/radlan/rlstack.mib rename to mibs/RADLAN-STACK-MIB diff --git a/mibs/radlan/rlsyslog.mib b/mibs/RADLAN-SYSLOG-MIB similarity index 100% rename from mibs/radlan/rlsyslog.mib rename to mibs/RADLAN-SYSLOG-MIB diff --git a/mibs/radlan/rlsntp.mib b/mibs/RADLAN-TIMESYNCHRONIZATION-MIB similarity index 100% rename from mibs/radlan/rlsntp.mib rename to mibs/RADLAN-TIMESYNCHRONIZATION-MIB diff --git a/mibs/radlan/rltuning.mib b/mibs/RADLAN-Tuning similarity index 100% rename from mibs/radlan/rltuning.mib rename to mibs/RADLAN-Tuning diff --git a/mibs/radlan/rludp.mib b/mibs/RADLAN-UDP similarity index 100% rename from mibs/radlan/rludp.mib rename to mibs/RADLAN-UDP diff --git a/mibs/radlan/rlinterfaces.mib b/mibs/RADLAN-rlInterfaces similarity index 100% rename from mibs/radlan/rlinterfaces.mib rename to mibs/RADLAN-rlInterfaces diff --git a/mibs/radlan/rllcli.mib b/mibs/RADLAN-rlLcli-MIB similarity index 100% rename from mibs/radlan/rllcli.mib rename to mibs/RADLAN-rlLcli-MIB diff --git a/mibs/radlan/rlapplication.mib b/mibs/RADLAN-rndApplications similarity index 100% rename from mibs/radlan/rlapplication.mib rename to mibs/RADLAN-rndApplications diff --git a/mibs/radlan/rlmng.mib b/mibs/RADLAN-rndMng similarity index 100% rename from mibs/radlan/rlmng.mib rename to mibs/RADLAN-rndMng diff --git a/mibs/radlan/rlvlan.mib b/mibs/RADLAN-vlan-MIB similarity index 100% rename from mibs/radlan/rlvlan.mib rename to mibs/RADLAN-vlan-MIB diff --git a/mibs/radlan/RADLAN-MIB.txt b/mibs/radlan/RADLAN-MIB.txt deleted file mode 100644 index 614cfad185..0000000000 --- a/mibs/radlan/RADLAN-MIB.txt +++ /dev/null @@ -1,6844 +0,0 @@ -RADLAN-MIB DEFINITIONS ::= BEGIN - --- Title: RADLAN ROS --- Version: 7.45 --- Date: 24 Jan 2006 --- --- 05-Jun-2003 Added rlHostParamTable --- 12-Jun-2003 Added enumeration to rndErrorSeverity --- 14-Jun-2003 Added field rlCopyHistoryErrorMessage to table rlCopyHistoryTable --- 29-Jun-2003 Tables rlOspf...LnkTable replayed tables rlOspf...LSATable) --- 08-Jul-2003 The low range boundary and the default value of rlDvmrpPruneLifetime --- were changed from 300 to 200 seconds --- 16-Jul-2003 The following values VesuvioT and VesuvioF were added to --- rlPhDModuleType --- 22-Jul-2003 Added rlStartupCDBChanged, rlManualReboot --- 23-Jul-2003 New group rldot1x was added --- 24-Jul-2003 Changed ipMRouteStdMIB to rlIpMRouteStdMIB --- 27-Jul-2003 Changed access of rlMaxNumberOfAccessRules to read-only --- 27-Jul-2003 Changed access of rlMaxNumberOfAccessRulesAfterReset to read-write --- 30-Jul-2003 Added 802.1x traps rldot1xPortStatusAuthorizedTrap and --- rldot1xPortStatusUnauthorizedTrap --- 30-Jul-2003 Added rlFile --- 31-Jul-2003 Added rlAAAEap --- 10-Aug-2003 Renamed enumeration values resetCDB to resetStartupCDB and --- eraseCDB to eraseStartupCDB and --- added enumeration values eraseRunningCDB and copyStartupToRunning --- 16-Aug-2003 Added rlSnmp --- 18-Aug-2002 Added rldot1xExtAuthSessionStatsTable --- 21-Aug-2003 Added rlOspfTuning --- 09-Sep-2003 Added rlPortCopyVlanTaggingTable --- 13-Sep-2003 Added IMPLIED to INDEX { IMPLIED rlTranslationNameToIpName } --- 15-Sep-2003 rlPhysicalDescription's version (a value of variable rlPhDMibVersion) --- was changed from 2 to 3 --- 15-Sep-2003 Added field rldot1dStpPortRole to rldot1dStpPortTable --- 15-Sep-2003 Added field rldot1sMStpInstancePortRole to rldot1sMstpInstancePortTable --- 15-Sep-2003 Added field rldot1sMstpExtPortBoundary to rldot1sMstpExtPortEntryTable --- 19-Sep-2003 Added rldot1xGuestVlanSupported, rldot1xGuestVlanVID, rldot1xGuestVlanPorts, --- rldot1xUnAuthenticatedVlanSupported, rldot1xUnAuthenticatedVlanTable, --- rldot1xUserBasedVlanSupported, rldot1xUserBasedVlanPorts --- 26-Sep-2003 Added rlMridTable --- 26-Sep-2003 Added rlMirModel --- 26-Sep-2003 Deleted JackType from IMPORTS clause --- 26-Sep-2003 Changed naming of SMIv2-like types --- 26-Sep-2003 Moved rlSyslog branch to new MIB --- 26-Sep-2003 Moved rlCopy branch to new MIB --- 26-Sep-2003 Editorial changes --- 02-Oct-2003 Added vlanSpecialTagTable --- 02-Oct-2003 Added field branch rlMibTree and table rlMibTreeTable --- 02-Oct-2003 rlPhysicalDescription's version (a value of variable rlPhDMibVersion) --- was changed from 3 to 4 --- 02-Oct-2003 Added vlanSpecialTagCurrentTable --- 09-Oct-2003 Added field rldot1sMstpInstanceRemainingHopes to rldot1sMstpInstanceTable --- 11-Oct-2003 Changed OSPF tuning --- 24-Oct-2003 Change range of rldot1sMstpInstancePortPathCost --- from (1..65535) to (1..200000000) --- 26-Oct-2003 Added rsMaxNumberRpAddresesInGroupRange,rsMaxNumberRpAddresesInGroupRangeAfterReset --- 26-Oct-2003 Removed rlPimSMBootStrapInfoEnable --- 27-Oct-2003 Change range of rldot1sMStpInstancePortAdminPathCost --- from (0..65535) to (0..200000000) --- 29-Oct-2003 Added rlIfExistingPortList --- 07-Nov-2003 rldot1sMstpMaxHopes: --- a. range was changed from 1..20 to 1..40 --- b. default value was chaged from 10 to 20 --- rldot1sMstpDesignatedMaxHopes: --- a. range was changed from 1..40 to 1..20 --- 02-Dec-2003 Unused group rsIpZeroHopRouting was deleted --- 03-Dec-2003 Added rlSNMPDomains branch --- 03-Dec-3003 Added rlTstBasicRateTable --- 14-Dec-2003 Added field rldot1dStpBpduType to rldot1dStpPortEntry --- 14-Dec-2003 Added rldot1dStpFilterBpdu --- 21-Dec-2003 Updated imports of DisplayString, PhysAddress, TimeInterval, --- DateAndTime, ipAddrEntry --- 21-Dec-3003 Added rlEmWebHttpsActiveCertificateId and rlSsl --- 24-Dec-3003 Added rldot1sMstpRemainingHops --- 13-Jan-2004 Change MSTP tables indexes to read-only. --- 30-Jan-2004 add field rldot1sMstpExtPortInternalAdminPathCost to rldot1sMstpExtPortTable. --- 30-Jan-2004 change field rldot1sMstpExtPortInternalPathCost to rldot1sMstpExtPortInternalOperPathCost --- and make it read-only, change range to (0..200000000). --- 03-Feb-2004 traps 186-191 are implemeted in the Physicaldescription MIB - for stacking. --- 09-Feb-2004 Change the upper rage of rldot1sMstpVlan to 4094. --- 11-Mar-2004 Added swIfPortLockIfRangeTable --- 26-Mar-2004 rlLcli MIB was moved to separated file --- 30-Mar-2004 Added traps swIfTablePortLock and swIfTablePortUnLock --- 19-Apr-2004 Moved to separate MIBS IP Multicast & DVMRP --- 24-Apr-2004 Moved to separate MIBS VLAN --- 05-May-2004 Deleted default values in swIfEntry --- 07-May-2004 Added mac base priority MIB as RND 101 --- 16-May-2004 Added value invalidImage(3) to rndActiveSoftwareFileAfterReset --- of rndActiveSoftwareFileTable --- 18-May-2004 Moved to separate files: ipSpec, rlBgp, rsTunning, rlFft, --- rndMng, rndApplications --- 31-May-2004 Added rlWlanAccessPoint --- 31-May-2004 Moved to separate files: rsUDP, swInterfaces, rlRmonControl --- 09-Jun-2004 change field rldot1sMstpInstancePortEnable in rldot1sMstpInstancePortEntry --- to read-only --- 16-Jun-2004 Added rndIpHostManagementSupported and rndIpHostManagementIfIndex --- 10-Nov-2004 Added rndNotifications --- 11-Nov-2004 Added rlAAAUserLocked trap --- 23-Nov-2004 Added type kiloBitsPerSecond RlStormCtrlRateUnit. --- 29-Nov-2004 limit rldot1sMstpPendingConfigurationName to 32 characters. --- 17-Jan-2005 Add rldot1dStpPortRestrictedRole field to rldot1dStpPortEntry --- 16-Mar-2005 Add rlLocalization branch --- 14-Apr-2005 Add rlRs232 --- 18-Apr-2005 Add rldot1dStpPortAutoEdgePort to rldot1dStpPortEntry --- 27-Apr-2005 ZachM add rlStackLinkChange trap. --- 16-Jun-2005 Added rlNicRedundancy --- 01-Jul-2005 Added rlIgmpSnoopMulticastTvTable --- 07-Dec-2005 Added rlUPnP branch --- 12-Dec-2005 Added rldot1dStpFloodBpduMethod --- 14-Dec-2005 Add rlLldp branch --- 02-Feb-2006 GalVA added rlEmWebExtraPort --- 02-Feb-2006 GalVA added rlEmWebExtraPortType --- 12-Feb-2006 Import V2 textual conventions from SNMPv2-TC-v1 instead of SNMPv2-TC and RADLAN-SNMPv2 --- 12-Feb-2006 Removed private trunk MIB to separate MIB module. --- 06-Mar-2006 Added rldot1dStpSeparatedBridges --- 13-Mar-2006 GalVA added rlEmWebMaxHttpsIdleTimeout --- 26-Mar-2006 Removed IMPORTs from IEEE8023-LAG-MIB + editorial change in rldot1dStpSeparatedBridges --- 24-May-2006 Added BPDU Guard support --- 31-May-2006 Added rldot1xAuthenticationPortTable OBJECT-TYPE --- 08-Jun-2006 Added rlDhcpSpoofing --- 08-Jun-2006 Added rldot1xAuthMultiStatsTable, rldot1xAuthMultiDiagTable, rldot1xAuthMultiSessionStatsEntry --- 02-Jul-2006 Added Bonjour branch --- 02-Jul-2006 Added rlLinksysSmartMIB branch --- 05-Jul-2006 Added rldot1xAuthConfigTable --- 10-Jul-2006 Moved branch rlMacMulticast to rlbridgemulticast --- 07-Aug-2006 Moved definitios of traps rlCopyFinished and rlCopyFailed TRAP-TYPE --- to ADLAN-COPY-MIB --- 23-Aug-2006 Added rlGlobalIpAddrTable --- 29-Aug-2006 Added rndImageSize --- 21-Sep-2006 Added rldot1xBpduFilteringEnabled --- 07-Sep-2006 Moved all rlEmbWeb definitions to rlembweb.mib --- 06-Oct-2006 Added rndBackupConfigurationEnabled --- 09-Oct-2006 Added rndImageInfoTable --- 03-Nov-2006 Added dlPrivate --- 18-Dec-2006 Added rlDhcpClCommandTable --- 24-Jan-2007 Added rlIntel --- 01-APR-2007 Added rlAutoUpdate --- 08-MAY-2007 Added rlCpuCounters --- 01-OCT-2007 Added 802.1x supplicant traps --- 09-Oct-2007 Added rldot1dStpPortLoopback in rldot1dStpPortEntry - -- 09-Oct-2007 Added loopback traps -IMPORTS - IpAddress, Counter, - TimeTicks, enterprises - FROM RFC1155-SMI - OBJECT-TYPE - FROM RFC-1212 - DisplayString, PhysAddress, TimeInterval, DateAndTime, - TruthValue, RowStatus, - RowPointer - FROM SNMPv2-TC-v1 --- TRAP-TYPE --- FROM RFC-1215 - InterfaceIndexOrZero, InterfaceIndex, ifIndex - FROM IF-MIB - BridgeId, Timeout, dot1dBasePort, dot1dBasePortEntry - FROM BRIDGE-MIB - EnabledStatus - FROM P-BRIDGE-MIB - PortList - FROM Q-BRIDGE-MIB - dot1xAuthSessionStatsEntry - FROM IEEE8021-PAE-MIB - MacAddress - FROM BRIDGE-MIB - Unsigned-32, Counter-32, Integer-32 - FROM SNMPv2-SMI-v1 - SnmpAdminString - FROM SNMP-FRAMEWORK-MIB - VlanIndex, dot1qFdbId - FROM Q-BRIDGE-MIB - dot1xPaePortNumber, PaeControlledPortStatus - FROM IEEE8021-PAE-MIB - Counter32, Counter64, Unsigned32 - FROM SNMPv2-SMI; - - Percents ::= INTEGER (0..100) - NetNumber ::= OCTET STRING (SIZE(4)) - VlanPriority ::= INTEGER (0..7) - RlStormCtrlRateUnit ::= INTEGER { - packetsPerSecond(1), - bytesPerSecond(2), - framesPerBuffer(3), - precentages(4), - kiloBytesPerSecond(5), - kiloBitsPerSecond(6) - } - - --- Some MIB compilers require that the following 7 lines which define the path --- to RND MIB are commented out: - --- mib OBJECT IDENTIFIER ::= { mgmt 1 } --- directory OBJECT IDENTIFIER ::= { internet 1 } --- experimental OBJECT IDENTIFIER ::= { internet 3 } --- private OBJECT IDENTIFIER ::= { internet 4 } --- enterprises OBJECT IDENTIFIER ::= { private 1 } - rnd OBJECT IDENTIFIER ::= { enterprises 89 } - --- Objects in this MIB are arranged into groups: ---01 rndMng - Management/Action ---02 rndDeviceParams - General parameters ---04 rndInterface - Obsolete ---09 rndBackup - Obsolete ---12 rndIPX - Parameters for management of IPX router ---16 rndFACS - Obsolete ---20 rndCOD - Obsolete ---22 rndBrgHub - Obsolete ---23 rndAdapter - Obsolete ---24 rndBootP - BootP configurgaration. ---26 ipSpec - IP Private MIBs ---27 virtualLan - Obsolete ---28 rsConf - Obsolete ---29 rsTunning - Tunning sub group ---30 rndISDN - Obsolete ---31 rndPPP - Obsolete ---34 frameRelay - Obsolete ---35 rndApplications - ---38 rsDHCP - DHCP server configuration ---39 radWiz - Obsolete ---40 rsCfgUpgrade - Obsolete ---42 rsUDP - ---43 swInterfaces - ---44 securityZone - Obsolete ---45 rll3SwtchETMdl - Obsolete ---46 rlIPmulticast - ---47 rlFFT - ---48 vlan - ---49 rlRmonControl - ---50 rlBrgMacSwitch - ---51 rlExperience - ---52 rlCli - ---53 rlPhysicalDescription - ---54 rlIfInterfaces - ---55 rlMacMulticast - ---56 rlGalileo - ---57 rlpBridgeMIBObjects- ---58 rlTelnet - ---59 rlPolicy - ---60 rlArpSpoofing - ---61 rlMir - ---62 rlIpMRouteStdMIB - ---63 rl3sw2swTables - ---64 rlGvrp - ---65 rlDot3adAgg - ---66 rlEmbWeb - ---67 rlSwPackageVersion - ---68 rlBroadcom - ---69 rlMultiSessionTerminal - ---70 rlRCli - ---71 rlBgp - ---72 rlAgentsCapabilitiesGroups - ---73 rlAggregateVlan - ---74 rlLCli - ---75 rlGmrp - ---76 rlDhcpCl - Dhcp client ---77 rlStormCtrl - ---78 rlSsh - ---79 rlAAA - ---80 Radius - ---81 rlTraceRoute - ---82 rlSyslog - ---83 rlEnv - HardWare status indication ---84 rlSmon - ---85 rlSocket - ---86 rlDigitalKeyManage - ---87 rlCopy - ---88 rlQosCliMib - ---89 rlMngInf - ---90 rlPhy - ---91 rlJumboFrames - ---92 rlTimeSynchronization ---93 rlDnsCl - Dns client ---94 rlCDB ---95 rldot1x ---96 rlFile ---97 rlAAAEap - AAA for 1x ---98 rlSNMP ---99 rlQosServ ---100 rlSsl ---101 rlMacBasePrio ---102 Wireless Access Point Private MIB ---103 rlLocalization ---104 rlRs232 ---105 rlNicRedundancy ---106 rlAmap ---107 rlStack ---108 rlPoe ---109 rlUPnP ---110 rlLldp ---111 rlOib ---112 rlBridgeSecurity ---113 rlDhcpSpoofing ---114 rlBonjour ---115 rlLinksysSmartMIB ---116 rlBrgMulticast ---117 rlBrgMcMngr ---118 rlGlobalIpAddrTable ---119 dlPrivate ---120 rlSecuritySuiteMib ---121 rlIntel ---123 rlAutoUpdate ---124 rlCpuCounters ---200 rlWanMib - --- At the end of the MIB there is a definition of all RND-specific traps. - -rndNotifications OBJECT-IDENTITY - STATUS current - DESCRIPTION " All the rnd notifications will reside under this branch - as specified in - RFC2578 'Structure of Management Information Version 2 (SMIv2)' 8.5" - ::= { rnd 0 } - - --- rndMng group contains Management Variables for RND devices - -rndMng OBJECT IDENTIFIER ::= { rnd 1 } --- see rlMng.mib - --- rndDeviceParams group contains a number of general variables - -rndDeviceParams OBJECT IDENTIFIER ::= { rnd 2 } - -rndBridgeType OBJECT-TYPE - SYNTAX INTEGER { - reb(1), - ceb(2), - ceblb(3), - xeb(4), - xeb1(5), - rebsx(6), - rtb(7), - ltb(8), - tre(9), - rtre(10), -- remote TRE - xtb(11), - ete(12), - rete(13), -- remote ETE - ielb(30), - leb(31), - openGate12(32), - openGate4(33), - ran(34), - itlb(35), - gatelinx(36), - openGate2(37), - ogRanTR(38), - rdapter(39), - ogVan(40), - wanGate(41), - ogRubE(42), - ogRubT(43), - wanGateI(44), - vGate4(45), - lre(46), - mrt(47), - vGate2(48) - } - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Identification of the RND bridge type." - ::= { rndDeviceParams 1 } - - -rndInactiveArpTimeOut OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-write - STATUS mandatory - DESCRIPTION - "This variable defines the maximum time period that can pass - between ARP requests concerning an entry in the ARP table. - After this time period, the entry is deleted from the table." - ::= { rndDeviceParams 2 } - --- The following two variables define the format of RND specific --- error messages issued by the RND devices - -rndBridgeAlarm OBJECT IDENTIFIER ::= { rndDeviceParams 3 } - -rndErrorDesc OBJECT-TYPE - SYNTAX DisplayString - ACCESS read-only - STATUS mandatory - DESCRIPTION - "A textual description of the enterprise-specific trap sent - to the Network Management Station by the RND managed device." - ::= { rndBridgeAlarm 1 } - -rndErrorSeverity OBJECT-TYPE - SYNTAX INTEGER { - info(0), - warning(1), - error(2), - fatal-error(3) - } - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The severity type of the enterprise-specific trap sent to the - Network Management Station by the RND managed device." - ::= { rndBridgeAlarm 2 } - -rndBrgVersion OBJECT-TYPE - SYNTAX DisplayString - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The bridge version." - ::= { rndDeviceParams 4 } - -rndBrgFeatures OBJECT-TYPE - SYNTAX OCTET STRING -- SIZE 20 - ACCESS read-only - STATUS mandatory - DESCRIPTION - "A bit mask that defines the features supported by a particular configuration - of this network element: - __________________________________________ - | Byte 1|Byte 2 |Byte 3 | ....|Byte 20 | - |87654321| | 87654321| - |________|_______________________________| - - Byte1 : - bit1: TX Block mask - bit2: Source Routing Encapulation - bit3: SNA/SDLC - bit4: Frame Relay - bit5: SNMP - bit6: LAN Manager - bit7: High Performance - bit8: Translation - Byte2 : - bit1: DEC Router - bit2: IPX Router - bit3: IP Router - Byte3 : - bit1: Dial Up Backup - bit2: COD - bit3: FACS - bit4: Load Balance - bit5: Remote Configuration - bit6: RIP 2 - bit7: OSPF - bit8: IPX RIP/SAP Filter - Byte4 : - bit1: BootP Server - bit2: BootP Client - bit3: Compression - bit4: V25.bis - bit5: ISDN - bit6: CODv2 - bit7: NSPF - bit8: UDP Relay - - Byte5 - bit1:VirtualLAN - bit2:Static IP Multicast - bit3:IP Redundancy - bit4:CCM2 - bit5:ISDN Bonding - bit6:Backup Link Selection -- for the VAN/Rdapter ver 4.0 - bit7:IP/IPX Forwarding -- for the WANgate ver 4.0 - bit8:Improved COD - - Byte6 - bit1: Server Disptacher - bit2: ISDN_US -- for the VANSX/WANGATE ver 5.0 - bit3: PPP - bit4: IP Rip Filter -- for Vgate3 - bit5: Zero Hop Routing -- for Vgate3 - bit6: ISDN Japan - bit7: PPP-Security - - Byte7 - bit1: With unmanaged Switch - bit2: 2 LANs - bit3: OSPF Ver 2.0 - bit4: FACS Ver 2.0 - bit5: Multiple WEB Farm - bit6: Backup Server - bit7: Check Connectivity - bit8: WSD multiplexing - -Byte8 - bit1: MRT3 - bit2: WSD Redundancy - bit3: DHCP Server - bit4: WSD Connection Limit - bit5: WSD Distributed System - bit6: WSD Load Report - bit7: WSD super farm - bit8: RadWiz leased line - -Byte9 - bit1: PPP IP address negotiaton - bit2: DNS - bit3: Nat - bit4: WSD Static proximity - bit5: WSD Dynamic proximity - bit6: WSD Proxy - bit7: WSD Proximity client - bit8: MAC Load balancing - -Byte10 - bit1: Unnum Inf - bit2: Power Supply redundancy - bit3: MRT PPP Compression - bit4: ZHR Apolo - bit5: Copy port - bit6: UDP Relay 2.0 - bit7: NVRAM - bit8: URL table - -Byte11 - bit1: URL super farm - bit2: NAT on LAN - bit3: Remote Con - bit4: AP5000 - bit5: Session tracking - bit6: Mirroring - bit7: Alias IP - bit8: CSD Nat - -Byte12 - bit1: content check - bit2: mlb virtual ip - bit3: reserved RadLan - bit4: csd nat exception - bit5: statistics monitor - bit6: reserved-for-radware " - - ::= { rndDeviceParams 5 } - -rndBrgLicense OBJECT-TYPE - SYNTAX OCTET STRING -- SIZE 20 - ACCESS read-write - STATUS mandatory - DESCRIPTION - "This parameter is used for entering a s/w license number for a device. - A separate license number is supplied for each device." - ::= { rndDeviceParams 6 } - --- IP Host Parameters - ---All the new parameters under this section will be added to the --- rndMng group, as rndIpHost sub-group. --- -rndIpHost OBJECT IDENTIFIER ::= { rndDeviceParams 7 } --- ---ICMP Transmission Enable\Disable ---The new variable will be - --- Obsolete --- rndICMPTransmitionEnable OBJECT-TYPE --- SYNTAX INTEGER { --- enable(1), --- disable(2) --- } --- ACCESS read-write --- STATUS mandatory --- DESCRIPTION --- "This variable controlls the ability to transmit ICMP frames" --- ::= { rndIpHost 1 } - -rndCommunityTable OBJECT-TYPE - SYNTAX SEQUENCE OF RndCommunityEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "The community table of the agent" - ::= { rndIpHost 2 } - -rndCommunityEntry OBJECT-TYPE - SYNTAX RndCommunityEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - " The row definition for this table." - INDEX { rndCommunityMngStationAddr, - IMPLIED rndCommunityString } - ::= { rndCommunityTable 1 } - -RndCommunityEntry ::= SEQUENCE { - rndCommunityMngStationAddr IpAddress, - rndCommunityString DisplayString, - rndCommunityAccess INTEGER, - rndCommunityTrapsEnable INTEGER, - rndCommunityStatus INTEGER, - rndCommunityPortSecurity INTEGER, - rndCommunityOwner DisplayString, - rndCommunityTrapDestPort INTEGER -} - - -rndCommunityMngStationAddr OBJECT-TYPE - SYNTAX IpAddress - ACCESS read-write - STATUS mandatory - DESCRIPTION - "The management station that will be allowed to - communicate with the agent IP address" - ::= { rndCommunityEntry 1 } - -rndCommunityString OBJECT-TYPE - SYNTAX DisplayString (SIZE(1..20)) - ACCESS read-write - STATUS mandatory - DESCRIPTION - "The community string with which the management - station will communicate with the agent" - ::= { rndCommunityEntry 2 } - -rndCommunityAccess OBJECT-TYPE - SYNTAX INTEGER { - readOnly(1), - readWrite(2), - super(3) - } - ACCESS read-write - STATUS mandatory - DESCRIPTION - "The allowed access to this management station" - ::= { rndCommunityEntry 3} - -rndCommunityTrapsEnable OBJECT-TYPE - SYNTAX INTEGER { - snmpV1(1), - snmpV2(2), - snmpV3(3), - trapsDisable(4) - } - ACCESS read-write - STATUS mandatory - DESCRIPTION - "Should the agent send traps to the management station, - and what version is required" - ::= { rndCommunityEntry 4 } - -rndCommunityStatus OBJECT-TYPE - SYNTAX INTEGER { - enable(1), - invalid(2) - } - ACCESS read-write - STATUS mandatory - DESCRIPTION - "The status of this entry. If the status is invalid the - community entry will be deleted" - ::= { rndCommunityEntry 5 } - -rndCommunityPortSecurity OBJECT-TYPE - SYNTAX INTEGER { - enabled(1), - disabled(2) - } - ACCESS read-write - STATUS mandatory - DESCRIPTION - "If enabled the device will only receive SNMP messages from the port, - through which this NMS is reachable from the device." - DEFVAL { disabled } - ::= { rndCommunityEntry 6 } - -rndCommunityOwner OBJECT-TYPE - SYNTAX DisplayString (SIZE(1..32)) - ACCESS read-write - STATUS mandatory - DESCRIPTION - "The owner of this community" - ::= { rndCommunityEntry 7 } - -rndCommunityTrapDestPort OBJECT-TYPE - SYNTAX INTEGER(0..65535) - ACCESS read-write - STATUS mandatory - DESCRIPTION - "The transport protocol (usually UDP) port to which traps to the - management station represebted by this entry will be sent. The default - is the well-known IANA assigned port number for SNMP traps. - This object is relevant only if rndCommunityTrapsEnable has a value - different from trapsDisable." - DEFVAL { 162 } - ::= { rndCommunityEntry 8 } - -rlMridTable OBJECT-TYPE - SYNTAX SEQUENCE OF RlMridEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "The MRID related configurations table of the agent" - ::= { rndIpHost 3 } - -rlMridEntry OBJECT-TYPE - SYNTAX RlMridEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - " The row definition for this table." - INDEX { rndCommunityMngStationAddr, - IMPLIED rndCommunityString } - ::= { rlMridTable 1 } - -RlMridEntry ::= SEQUENCE { - rlMridConnection INTEGER, - rlManagedMrid INTEGER -} - -rlMridConnection OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-write - STATUS mandatory - DESCRIPTION - "The router instance connecting the NMS who accessed the agent - through the community table entry corresponding to the keys of this entry." - ::= { rlMridEntry 1 } - -rlManagedMrid OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-write - STATUS mandatory - DESCRIPTION - "The router instance currently managed by the NMS who accessed the agent - through the community table entry corresponding to the keys of this entry " - ::= { rlMridEntry 2 } - -rndManagedTime OBJECT-TYPE - SYNTAX DisplayString (SIZE(6)) - ACCESS read-write - STATUS mandatory - DESCRIPTION - "The time will be sent in the format hhmmss" - ::= { rndDeviceParams 8 } - -rndManagedDate OBJECT-TYPE - SYNTAX DisplayString (SIZE(6)) - ACCESS read-write - STATUS mandatory - DESCRIPTION - "The date will be sent in the format ddmmyy" - ::= { rndDeviceParams 9 } - -rndBaseBootVersion OBJECT-TYPE - SYNTAX DisplayString - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Defines the boot version of the product." - ::= { rndDeviceParams 10 } - -rndIpHostManagement OBJECT IDENTIFIER ::= { rndIpHost 4 } - -rndIpHostManagementSupported OBJECT-TYPE - SYNTAX TruthValue - ACCESS read-only - STATUS mandatory - DESCRIPTION - "ifindex manage supported." - ::= { rndIpHostManagement 1 } - -rndIpHostManagementIfIndex OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-write - STATUS mandatory - DESCRIPTION - "if supported manage , indicate ifindex, if 0 thaen disable" - ::= { rndIpHostManagement 2 } - -genGroup OBJECT IDENTIFIER ::= { rndDeviceParams 11 } -genGroupHWVersion OBJECT-TYPE - SYNTAX DisplayString - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Defines the HW version of the product." - ::= { genGroup 1 } - -genGroupConfigurationSymbol OBJECT-TYPE - SYNTAX DisplayString (SIZE(1)) - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Defines the Configuration Symbol attached to any hardware module - manufactured by LANNET. One single character A..Z defines the CS - version." - ::= { genGroup 2 } - -genGroupHWStatus OBJECT-TYPE - SYNTAX INTEGER { - ok(1), - hardwareProblems(2), - notSupported(255) - } - ACCESS read-only - STATUS mandatory - DESCRIPTION - "This attribute describes the status of the group hardware as detected - by the sensors software." - ::= { genGroup 3 } - -rndBasePhysicalAddress OBJECT-TYPE - SYNTAX PhysAddress - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The Base physical (MAC) address of the device." - ::= { rndDeviceParams 12 } - -rndSoftwareFile OBJECT IDENTIFIER ::= { rndDeviceParams 13 } - -rndActiveSoftwareFileTable OBJECT-TYPE - SYNTAX SEQUENCE OF RndActiveSoftwareFileEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - " The (conceptual) table listing the active software file of the - requested unit." - ::= {rndSoftwareFile 1 } - -rndActiveSoftwareFileEntry OBJECT-TYPE - SYNTAX RndActiveSoftwareFileEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - " An entry (conceptual row) in the rndActiveSoftwareFileTable." - INDEX {rndUnitNumber } - ::= {rndActiveSoftwareFileTable 1 } - -RndActiveSoftwareFileEntry ::= SEQUENCE { - rndUnitNumber INTEGER, - rndActiveSoftwareFile INTEGER, - rndActiveSoftwareFileAfterReset INTEGER -} - -rndUnitNumber OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-write - STATUS mandatory - DESCRIPTION - "The unit number (for stackable devices) or 1 for 'stand alone' device." - ::= {rndActiveSoftwareFileEntry 1 } - -rndActiveSoftwareFile OBJECT-TYPE - SYNTAX INTEGER { - image1(1), - image2(2) - } - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Indicates the current active software file, image1 or image2." - ::= {rndActiveSoftwareFileEntry 2 } - -rndActiveSoftwareFileAfterReset OBJECT-TYPE - SYNTAX INTEGER { - image1(1), - image2(2), - invalidImage(3) - } - ACCESS read-write - STATUS mandatory - DESCRIPTION - "Indicates the software file that will be active after reset (image1 or image2). - If an error occurred in the download process, resulting in the corruption - of the single software file, The value 'invalidImage' will be returned. - This value can not be set by the user." - ::= {rndActiveSoftwareFileEntry 3 } - -rndImageSize OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Max number of sectors currently allocated for image(s)." - ::= { rndDeviceParams 14 } - -rndBackupConfigurationEnabled OBJECT-TYPE - SYNTAX TruthValue - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Specifies whether the device supports backup-config parameters in lcli commands." - ::= { rndDeviceParams 15 } - -rndImageInfo OBJECT IDENTIFIER ::= { rndDeviceParams 16 } - -rndImageInfoTable OBJECT-TYPE - SYNTAX SEQUENCE OF RndImageInfoEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - " The table contains information about images." - ::= {rndImageInfo 1 } - -rndImageInfoEntry OBJECT-TYPE - SYNTAX RndImageInfoEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - " An entry in the rndImageInfoTable." - INDEX {rndStackUnitNumber } - ::= {rndImageInfoTable 1 } - -RndImageInfoEntry ::= SEQUENCE { - rndStackUnitNumber INTEGER, - rndImage1Name DisplayString, - rndImage2Name DisplayString, - rndImage1Version DisplayString, - rndImage2Version DisplayString, - rndImage1Date DisplayString, - rndImage2Date DisplayString, - rndImage1Time DisplayString, - rndImage2Time DisplayString -} - -rndStackUnitNumber OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-write - STATUS mandatory - DESCRIPTION - "The unit number (for stackable devices) or 1 for 'stand alone' device." - ::= {rndImageInfoEntry 1 } - -rndImage1Name OBJECT-TYPE - SYNTAX DisplayString - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Indicates the file name of image-1 in the system." - ::= {rndImageInfoEntry 2 } - -rndImage2Name OBJECT-TYPE - SYNTAX DisplayString - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Indicates the file name of image-2 (if present) in the system.If image-2 is not present show 'no info' text" - ::= {rndImageInfoEntry 3 } - - -rndImage1Version OBJECT-TYPE - SYNTAX DisplayString - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Indicates the version of image-1 in the system." - ::= {rndImageInfoEntry 4 } - -rndImage2Version OBJECT-TYPE - SYNTAX DisplayString - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Indicates the version of image-2 (if present) in the system.If image-2 is not present show 'no info' text" - ::= {rndImageInfoEntry 5 } - -rndImage1Date OBJECT-TYPE - SYNTAX DisplayString - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Indicates the compilation date of image-1 in the system." - ::= {rndImageInfoEntry 6 } - -rndImage2Date OBJECT-TYPE - SYNTAX DisplayString - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Indicates the compilation date of image-2 (if present) in the system.If image-2 is not present show 'no info' text" - ::= {rndImageInfoEntry 7 } - -rndImage1Time OBJECT-TYPE - SYNTAX DisplayString - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Indicates the compilation time of image-1 in the system." - ::= {rndImageInfoEntry 8 } - -rndImage2Time OBJECT-TYPE - SYNTAX DisplayString - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Indicates the compilation time of image-2 (if present) in the system.If image-2 is not present show 'no info' text" - ::= {rndImageInfoEntry 9 } - - --- Obsolete --- rndInterface OBJECT IDENTIFIER ::= { rnd 4 } - --- Obsolete --- rndBackup OBJECT IDENTIFIER ::= { rnd 9 } - --- Obsolete --- rndIPX OBJECT IDENTIFIER ::= { rnd 12 } - --- Obsolete --- rndFACS OBJECT IDENTIFIER ::= { rnd 16 } - --- Obsolete --- rndCOD OBJECT IDENTIFIER ::= { rnd 20 } - --- Obsolete --- rndBrgHub OBJECT IDENTIFIER ::= { rnd 22 } - --- Obsolete --- rndAdapter OBJECT IDENTIFIER ::= { rnd 23 } - -rndBootP OBJECT IDENTIFIER ::= { rnd 24 } - -rndBootPServerAddress OBJECT-TYPE - SYNTAX IpAddress - ACCESS read-write - STATUS mandatory - DESCRIPTION - " The IPAddress of the BOOTP server. the OpenGate will act as a BootP relay if - this parameter is not equale to 0.0.0.0." - DEFVAL {'00000000'H} - ::= { rndBootP 1 } - -rndBootPRelaySecThreshold OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-write - STATUS mandatory - DESCRIPTION - "BootP requests are relayed only if their SEC field is greater or - equal to the threshold value in order to allow local BootP Servers - to answer first." - ::= { rndBootP 2 } - --- ip Specific group Addition parameters to ip group in MIB-2 - -ipSpec OBJECT IDENTIFIER ::= { rnd 26 } --- see rlIp.mib - --- Obsolete --- virtualLan OBJECT IDENTIFIER ::= { rnd 27 } - --- Obsolete --- rsConf OBJECT IDENTIFIER ::= { rnd 28 } - -rsTunning OBJECT IDENTIFIER ::= { rnd 29 } --- see rlTuning.mib - --- Obsolete --- rndISDN OBJECT IDENTIFIER ::= { rnd 30} - --- Obsolete --- rndPPP OBJECT IDENTIFIER ::= { rnd 31 } - --- Obsolete --- frameRelay OBJECT IDENTIFIER ::= { rnd 34 } - -rndApplications OBJECT IDENTIFIER ::= { rnd 35 } --- see rlApplication.mib - --- Obsolete --- rndOGCompression OBJECT IDENTIFIER ::= { rnd 36 } - --- Obsolete --- rndEthernet OBJECT IDENTIFIER ::= { rnd 37 } - ---rsDHCP OBJECT IDENTIFIER ::= { rnd 38 } ---see rlDhcl.mib - --- Obsolete --- radWiz OBJECT IDENTIFIER ::= { rnd 39 } - --- Obsolete --- rsCfgUpgrade OBJECT IDENTIFIER ::= { rnd 40 } - --- Obsolete ---rsRMON OBJECT IDENTIFIER ::= { rnd 41 } - --- rsCopyPort was deleted --- { rsRMON 1 } reserved - --- rsMonitPort was deleted --- { rsRMON 2 } reserved - -rsUDP OBJECT IDENTIFIER ::= { rnd 42} --- see rlUdp.mib - -swInterfaces OBJECT IDENTIFIER ::= { rnd 43 } --- see rlInterfaces.mib - --- Obsolete --- securityZone OBJECT IDENTIFIER ::= { rnd 44 } - --- Obsolete --- rll3SwtchETMdl OBJECT IDENTIFIER ::= { rnd 45 } - -rlIPmulticast OBJECT IDENTIFIER ::= { rnd 46 } - -rlFFT OBJECT IDENTIFIER ::= { rnd 47 } - -vlan OBJECT IDENTIFIER ::= { rnd 48 } - -rlRmonControl OBJECT IDENTIFIER ::= { rnd 49} --- see rlRmon.mib - -rlBrgMacSwitch OBJECT IDENTIFIER ::= { rnd 50 } - -rlBrgMacSwVersion OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-only - STATUS mandatory - DESCRIPTION - "MIB's version, the current version is 2." - ::= { rlBrgMacSwitch 1 } - -rlBrgMacSwMaxTableNumber OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Maximum number of MAC Tables supported by the device." - ::= { rlBrgMacSwitch 2 } - -rlBrgMacSwDynamicTables OBJECT-TYPE - SYNTAX INTEGER { - supported (1), - unsupported (2) - } - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Specifies whether the device supports port dynamic MAC tables." - ::= { rlBrgMacSwitch 3 } - ---rlBrgMacSwTblPollingTimeout OBJECT-TYPE --- SYNTAX INTEGER --- ACCESS read-write --- STATUS mandatory --- DESCRIPTION --- "The units of this MIB object is seconds." --- ::= { rlBrgMacSwitch 4 } - -rlBrgMacSwOldEntryDeleteMode OBJECT-TYPE - SYNTAX INTEGER { - refreshFlag (1), - agingFlag(2), - agingTime(3), - boundaries(4) - } - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The method used to delete old unused entries - refresh_flag: - The high level sets a flag when it adds or updates an entry, - the Switch clears the flag each time, when it learns the - station once more. - aging_flag: - The high level clears a flag when it adds or updates an entry, - the Switch sets the flag each time, when it learns the station - once more. - aging_time: - The high level defines a timeout, the Switch sends a message - to the high level each time when the station doesn't send - messages during interval between timeout and 2*timeout. - Boundaries: - The Switch doesn't support any mechanism, and the high level - uses two boundaries: red and yellow. When the number of entries - exceeds the red boundary, the high level deletes the oldest entries." - ::= { rlBrgMacSwitch 5 } - -rlBrgMacSwSpanningTree OBJECT-TYPE - SYNTAX INTEGER { - supported (1), - unsupported (2) - } - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Specifies whether the device supports port the Spanning Tree Protocol." - ::= { rlBrgMacSwitch 6 } - -rlBrgMacSwKeyType OBJECT-TYPE - SYNTAX INTEGER { - macOnly (1), - tagAndMac(2) - } - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Specified the used MAC Address Table kye format: - macOnly: - One global MAC Address Table per device (leaky VLANs). - tagAndMac: - MAC Address Table per each VLAN (strick VLANs)." - ::= { rlBrgMacSwitch 7 } - -rlBrgMacSwYellowBoundary OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-write - STATUS mandatory - DESCRIPTION - "The yellow boundary." - ::= { rlBrgMacSwitch 8 } - -rlBrgMacSwRedBoundary OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-write - STATUS mandatory - DESCRIPTION - "The yellow boundary." - ::= { rlBrgMacSwitch 9 } - -rlBrgMacSwTrapEnable OBJECT-TYPE - SYNTAX TruthValue - ACCESS read-write - STATUS mandatory - DESCRIPTION - "This variable indicates whether to create a SNMP trap - if adding dynamic mac failed due to full hash chain." - DEFVAL { false } - ::= { rlBrgMacSwitch 10 } - -rlBrgMacSwOperTrapCount OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-only - STATUS mandatory - DESCRIPTION - "This variable indicates the trap counter status - (i.e. number of received MAC addresses since the last trap - sent that haven't been inserted into the hash). - It is relevant only when trap is enabled." - ::= { rlBrgMacSwitch 11 } - -rlBrgMacSwAdminTrapFrequency OBJECT-TYPE - SYNTAX INTEGER (1 .. 86400) --- UNITS "seconds" - ACCESS read-write - STATUS mandatory - DESCRIPTION - "This variable indicates the minimal frequency (in seconds) - of sending a trap. - It is relevant only when trap is enabled." - DEFVAL { 60 } - ::= { rlBrgMacSwitch 12 } - -rlExperience OBJECT IDENTIFIER ::= { rnd 51 } - --- Used for Drafts not received yet OBJECT IDENTIFIER - -rlCli OBJECT IDENTIFIER ::= { rnd 52 } - -rlCliMibVersion OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-only - STATUS mandatory - DESCRIPTION - "MIB's version, the current version is 1." - ::= { rlCli 1 } - -rlCliPassword OBJECT-TYPE - SYNTAX DisplayString (SIZE(0..20)) - ACCESS read-write - STATUS mandatory - DESCRIPTION - "CLI Password" - ::= { rlCli 2 } - -rlCliTimer OBJECT-TYPE - SYNTAX INTEGER (5..3600) - ACCESS read-write - STATUS mandatory - DESCRIPTION - "CLI Timer" - ::= { rlCli 3 } - -rlCliFileEnable OBJECT-TYPE - SYNTAX TruthValue - ACCESS read-only - STATUS mandatory - DESCRIPTION - "CLI File Enable/Disable" - ::= { rlCli 4 } - -rlCliFileEnableAfterReset OBJECT-TYPE - SYNTAX TruthValue - ACCESS read-write - STATUS mandatory - DESCRIPTION - "CLI File Enable/Disable After Reset" - ::= { rlCli 5 } - -rlPhysicalDescription OBJECT IDENTIFIER ::= { rnd 53 } - -rlIfInterfaces OBJECT IDENTIFIER ::= { rnd 54 } --- see rlInterfaces.mib - -rlMacMulticast OBJECT IDENTIFIER ::= { rnd 55 } ---see rlbrgmulticast.mib - -rlGalileo OBJECT IDENTIFIER ::= { rnd 56 } - -rlpBridgeMIBObjects OBJECT IDENTIFIER ::= { rnd 57 } - -rldot1dPriority OBJECT IDENTIFIER ::= { rlpBridgeMIBObjects 1 } - -rldot1dPriorityMibVersion OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-only - STATUS mandatory - DESCRIPTION - "MIB's version, the current version is 1." - ::= { rldot1dPriority 1 } - --- --- rldot1dPriorityPortGroupTable --- - -rldot1dPriorityPortGroupTable OBJECT-TYPE - SYNTAX SEQUENCE OF Rldot1dPriorityPortGroupEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "A list of PortGroupNumber for each port." - ::= { rldot1dPriority 2 } - -rldot1dPriorityPortGroupEntry OBJECT-TYPE - SYNTAX Rldot1dPriorityPortGroupEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "All ports belonging to a same group have - the same User Priority to Traffic Class mapping." - INDEX { dot1dBasePort } - ::= { rldot1dPriorityPortGroupTable 1 } - -Rldot1dPriorityPortGroupEntry ::= SEQUENCE { - rldot1dPriorityPortGroupNumber INTEGER -} - -rldot1dPriorityPortGroupNumber OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-only - STATUS mandatory - DESCRIPTION - "A group, that port belongs to. All ports belonging - to a same group have the same User Priority to - Traffic Class mapping." - ::= { rldot1dPriorityPortGroupEntry 1 } - - -rldot1dStp OBJECT IDENTIFIER ::= { rlpBridgeMIBObjects 2 } - --- --- Scalars --- -rldot1dStpMibVersion OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-only - STATUS mandatory - DESCRIPTION - "MIB's version, the current version is 2." - ::= { rldot1dStp 1 } - -rldot1dStpType OBJECT-TYPE - SYNTAX INTEGER { - perDevice (1), - mstp (4) - } - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Specifies whether the device supports Spanning Tree per device, - or per group." - ::= { rldot1dStp 2 } - -rldot1dStpEnable OBJECT-TYPE - SYNTAX TruthValue - ACCESS read-write - STATUS mandatory - DESCRIPTION - "Enable / Disable spanning tree. When working in per vlan mode - enable / disable STP per all vlans." - DEFVAL { true } - ::= { rldot1dStp 3 } - -rldot1dStpPortMustBelongToVlan OBJECT-TYPE - SYNTAX TruthValue - ACCESS read-write - STATUS mandatory - DESCRIPTION - "Specifies whether a port must belong to a VLAN in order - to participate in the STP." - DEFVAL { true } - ::= { rldot1dStp 4 } - -rldot1dStpExtendedPortNumberFormat OBJECT-TYPE - SYNTAX TruthValue - ACCESS read-write - STATUS mandatory - DESCRIPTION - "Specifies whether the STP uses the extended port fnumber format." - DEFVAL { false } - ::= { rldot1dStp 5 } - --- --- The Spanning Tree Vlan Table --- -rldot1dStpVlanTable OBJECT-TYPE - SYNTAX SEQUENCE OF Rldot1dStpVlanEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "A table that contains vlan-specific information - for the Spanning Tree Protocol." - ::= { rldot1dStp 6 } - -rldot1dStpVlanEntry OBJECT-TYPE - SYNTAX Rldot1dStpVlanEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "A list of information maintained by every Vlan - about the Spanning Tree Protocol state for that - Vlan." - INDEX { rldot1dStpVlan } - ::= { rldot1dStpVlanTable 1 } - -Rldot1dStpVlanEntry ::= SEQUENCE { - rldot1dStpVlan INTEGER, - rldot1dStpVlanEnable TruthValue, - rldot1dStpTimeSinceTopologyChange TimeTicks, - rldot1dStpTopChanges Counter, - rldot1dStpDesignatedRoot BridgeId, - rldot1dStpRootCost INTEGER, - rldot1dStpRootPort INTEGER, - rldot1dStpMaxAge Timeout, - rldot1dStpHelloTime Timeout, - rldot1dStpHoldTime INTEGER, - rldot1dStpForwardDelay Timeout -} - -rldot1dStpVlan OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The Vlan index." - ::= { rldot1dStpVlanEntry 1 } - -rldot1dStpVlanEnable OBJECT-TYPE - SYNTAX TruthValue - ACCESS read-write - STATUS mandatory - DESCRIPTION - "Specifies whether this vlan is STP enable or disable" - REFERENCE - " ?? " - DEFVAL { true } - ::= { rldot1dStpVlanEntry 2 } - -rldot1dStpTimeSinceTopologyChange OBJECT-TYPE - SYNTAX TimeTicks - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The time (in hundredths of a second) since the - last time a topology change was detected by the - bridge entity." - REFERENCE - "IEEE 802.1D-1990: Section 6.8.1.1.3" - ::= { rldot1dStpVlanEntry 3 } - -rldot1dStpTopChanges OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The total number of topology changes detected by - this bridge since the management entity was last - reset or initialized." - REFERENCE - "IEEE 802.1D-1990: Section 6.8.1.1.3" - ::= { rldot1dStpVlanEntry 4 } - -rldot1dStpDesignatedRoot OBJECT-TYPE - SYNTAX BridgeId - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The bridge identifier of the root of the spanning - tree as determined by the Spanning Tree Protocol - as executed by this node. This value is used as - the Root Identifier parameter in all Configuration - Bridge PDUs originated by this node." - REFERENCE - "IEEE 802.1D-1990: Section 4.5.3.1" - ::= { rldot1dStpVlanEntry 5 } - -rldot1dStpRootCost OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The cost of the path to the root as seen from - this bridge." - REFERENCE - "IEEE 802.1D-1990: Section 4.5.3.2" - ::= { rldot1dStpVlanEntry 6 } - -rldot1dStpRootPort OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The port number of the port which offers the - lowest cost path from this bridge to the root - bridge." - REFERENCE - "IEEE 802.1D-1990: Section 4.5.3.3" - ::= { rldot1dStpVlanEntry 7 } - -rldot1dStpMaxAge OBJECT-TYPE - SYNTAX Timeout - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The maximum age of Spanning Tree Protocol - information learned from the network on any port - before it is discarded, in units of hundredths of - a second. This is the actual value that this - bridge is currently using." - REFERENCE - "IEEE 802.1D-1990: Section 4.5.3.4" - ::= { rldot1dStpVlanEntry 8 } - -rldot1dStpHelloTime OBJECT-TYPE - SYNTAX Timeout - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The amount of time between the transmission of - Configuration bridge PDUs by this node on any port - when it is the root of the spanning tree or trying - to become so, in units of hundredths of a second. - This is the actual value that this bridge is - currently using." - REFERENCE - "IEEE 802.1D-1990: Section 4.5.3.5" - ::= { rldot1dStpVlanEntry 9 } - -rldot1dStpHoldTime OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-only - STATUS mandatory - DESCRIPTION - "This time value determines the interval length - during which no more than two Configuration bridge - PDUs shall be transmitted by this node, in units - of hundredths of a second." - REFERENCE - "IEEE 802.1D-1990: Section 4.5.3.14" - ::= { rldot1dStpVlanEntry 10 } - -rldot1dStpForwardDelay OBJECT-TYPE - SYNTAX Timeout - ACCESS read-only - STATUS mandatory - DESCRIPTION - "This time value, measured in units of hundredths - of a second, controls how fast a port changes its - spanning state when moving towards the Forwarding - state. The value determines how long the port - stays in each of the Listening and Learning - states, which precede the Forwarding state. This - value is also used, when a topology change has - been detected and is underway, to age all dynamic - entries in the Forwarding Database. [Note that - this value is the one that this bridge is - currently using, in contrast to - dot1dStpBridgeForwardDelay which is the value that - this bridge and all others would start using - if/when this bridge were to become the root.]" - REFERENCE - "IEEE 802.1D-1990: Section 4.5.3.6" - ::= { rldot1dStpVlanEntry 11 } - --- --- rldot1dStpVlanPortTable --- -rldot1dStpVlanPortTable OBJECT-TYPE - SYNTAX SEQUENCE OF Rldot1dStpVlanPortEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "A table that contains pair specific information - for the Spanning Tree Protocol." - ::= { rldot1dStp 7 } - -rldot1dStpVlanPortEntry OBJECT-TYPE - SYNTAX Rldot1dStpVlanPortEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "A list of information maintained by every pair - about the Spanning Tree Protocol state for that pair." - INDEX { rldot1dStpVlanPortVlan, rldot1dStpVlanPortPort } - ::= { rldot1dStpVlanPortTable 1 } - -Rldot1dStpVlanPortEntry ::= SEQUENCE { - rldot1dStpVlanPortVlan INTEGER, - rldot1dStpVlanPortPort INTEGER, - rldot1dStpVlanPortPriority INTEGER, - rldot1dStpVlanPortState INTEGER, - rldot1dStpVlanPortEnable INTEGER, - rldot1dStpVlanPortPathCost INTEGER, - rldot1dStpVlanPortDesignatedRoot BridgeId, - rldot1dStpVlanPortDesignatedCost INTEGER, - rldot1dStpVlanPortDesignatedBridge BridgeId, - rldot1dStpVlanPortDesignatedPort OCTET STRING, - rldot1dStpVlanPortForwardTransitions Counter -} - -rldot1dStpVlanPortVlan OBJECT-TYPE - SYNTAX INTEGER (1..4095) - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The Vlan number that the port belongs to, and for which this entry - contains Spanning Tree Protocol management - information." - REFERENCE - "IEEE 802.1s/D2-1999 " - ::= { rldot1dStpVlanPortEntry 1 } - -rldot1dStpVlanPortPort OBJECT-TYPE - SYNTAX INTEGER (1..4096) - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The port number of the port for which this entry - contains Spanning Tree Protocol management - information." - REFERENCE - "IEEE 802.1t/D2-1999: Section 9.2.6" - ::= { rldot1dStpVlanPortEntry 2 } - -rldot1dStpVlanPortPriority OBJECT-TYPE - SYNTAX INTEGER (0..255) - ACCESS read-write - STATUS mandatory - DESCRIPTION - "The value of the priority field which is - contained in the more significant 4 bits of the most - significant octet of the (2 octet long) Port ID. - The other octet of the Port ID is given by the value - of rldot1dStpVlanPort." - REFERENCE - "IEEE 802.1t/D2-1999: Section 9.2.6" - ::= { rldot1dStpVlanPortEntry 3 } - -rldot1dStpVlanPortState OBJECT-TYPE - SYNTAX INTEGER { - disabled(1), - blocking(2), - listening(3), - learning(4), - forwarding(5), - broken(6) - } - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The port's current state as defined by application of - the Spanning Tree Protocol. This state controls what - action a port takes on reception of a frame. - If the bridge has detected a port that is malfunctioning - it will place that port into the broken(6) state. For ports - which are disabled (see dot1dStpVlanPortEnable), this object - will have a value of disabled(1)." - REFERENCE - "IEEE 802.1D-1990: Section 4.5.5.2" - ::= { rldot1dStpVlanPortEntry 4 } - -rldot1dStpVlanPortEnable OBJECT-TYPE - SYNTAX INTEGER { - enabled(1), - disabled(2) - } - ACCESS read-write - STATUS mandatory - DESCRIPTION - "The enabled/disabled status of the port." - REFERENCE - "IEEE 802.1D-1990: Section 4.5.5.2" - ::= { rldot1dStpVlanPortEntry 5 } - -rldot1dStpVlanPortPathCost OBJECT-TYPE - SYNTAX INTEGER (1..65535) - ACCESS read-write - STATUS mandatory - DESCRIPTION - "The contribution of this port to the path cost of - paths towards the spanning tree root which include - this port. 802.1D-1990 recommends that the - default value of this parameter be in inverse - proportion to the speed of the attached LAN." - REFERENCE - "IEEE 802.1D-1990: Section 4.5.5.3" - ::= { rldot1dStpVlanPortEntry 6 } - -rldot1dStpVlanPortDesignatedRoot OBJECT-TYPE - SYNTAX BridgeId - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The unique Bridge Identifier of the Bridge - recorded as the Root in the Configuration BPDUs - transmitted by the Designated Bridge for the - segment to which the port is attached." - REFERENCE - "IEEE 802.1D-1990: Section 4.5.5.4" - ::= { rldot1dStpVlanPortEntry 7 } - -rldot1dStpVlanPortDesignatedCost OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The path cost of the Designated Port of the - segment connected to this port. This value is - compared to the Root Path Cost field in received - bridge PDUs." - REFERENCE - "IEEE 802.1D-1990: Section 4.5.5.5" - ::= { rldot1dStpVlanPortEntry 8 } - -rldot1dStpVlanPortDesignatedBridge OBJECT-TYPE - SYNTAX BridgeId - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The Bridge Identifier of the bridge which this - port considers to be the Designated Bridge for - this port's segment." - REFERENCE - "IEEE 802.1D-1990: Section 4.5.5.6" - ::= { rldot1dStpVlanPortEntry 9 } - -rldot1dStpVlanPortDesignatedPort OBJECT-TYPE - SYNTAX OCTET STRING (SIZE (2)) - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The Port Identifier of the port on the Designated - Bridge for this port's segment." - REFERENCE - "IEEE 802.1D-1990: Section 4.5.5.7" - ::= { rldot1dStpVlanPortEntry 10 } - -rldot1dStpVlanPortForwardTransitions OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of times this port has transitioned - from the Learning state to the Forwarding state." - ::= { rldot1dStpVlanPortEntry 11 } - --- --- STP Private TRAP variables --- -rldot1dStpTrapVariable OBJECT IDENTIFIER ::= { rldot1dStp 8 } - -rldot1dStpTrapVrblifIndex OBJECT-TYPE - SYNTAX InterfaceIndex - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The ifIndex of port which STP status was changed" - ::= { rldot1dStpTrapVariable 1 } - -rldot1dStpTrapVrblVID OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The VID of VLAN to which the port belongs which STP status was changed" - ::= { rldot1dStpTrapVariable 2 } - -rldot1dStpTypeAfterReset OBJECT-TYPE - SYNTAX INTEGER { - perDevice(1), - mstp(4) - } - ACCESS read-write - STATUS mandatory - DESCRIPTION - "New mode of spaning tree supported by the device after the next reset." - DEFVAL { perDevice } - ::= { rldot1dStp 9 } - -rldot1dStpMonitorTime OBJECT-TYPE - SYNTAX INTEGER (1..20) - ACCESS read-write - STATUS mandatory - DESCRIPTION - "Factor of hello-time during which a port is monotored to determine if it is stable." - DEFVAL { 10 } - ::= { rldot1dStp 10 } - -rldot1dStpBpduCount OBJECT-TYPE - SYNTAX INTEGER (1..60) - ACCESS read-write - STATUS mandatory - DESCRIPTION - "The number of bpdu that need to received for the link to be considered stable." - DEFVAL { 10 } - ::= { rldot1dStp 11 } - -rldot1dStpLastChanged OBJECT-TYPE - SYNTAX TimeTicks - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The last time any object in this table was changed - by SNMP or other local management means." - REFERENCE - "" - ::= { rldot1dStp 12 } - --- --- rldot1dStpPortTable --- -rldot1dStpPortTable OBJECT-TYPE - SYNTAX SEQUENCE OF Rldot1dStpPortEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "A table that contains extended pair port specific information." - ::= { rldot1dStp 13 } - -rldot1dStpPortEntry OBJECT-TYPE - SYNTAX Rldot1dStpPortEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "A list of information maintained by every port - about the Spanning Tree Protocol state for that port." - INDEX { rldot1dStpPortPort } - ::= { rldot1dStpPortTable 1 } - -Rldot1dStpPortEntry ::= SEQUENCE { - rldot1dStpPortPort INTEGER, - rldot1dStpPortDampEnable TruthValue, - rldot1dStpPortDampStable TruthValue, - rldot1dStpPortFilterBpdu TruthValue, - rldot1dStpPortBpduSent Counter-32, - rldot1dStpPortBpduReceived Counter-32, - rldot1dStpPortRole INTEGER, - rldot1dStpBpduType INTEGER, - rldot1dStpPortRestrictedRole TruthValue, - rldot1dStpPortAutoEdgePort TruthValue, - rldot1dStpPortLoopback TruthValue -} - -rldot1dStpPortPort OBJECT-TYPE - SYNTAX INTEGER (1..4096) - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The port number of the port for which this entry - contains Spanning Tree Protocol management - information." - REFERENCE - "IEEE 802.1t/D2-1999: Section 9.2.6" - ::= { rldot1dStpPortEntry 1 } - -rldot1dStpPortDampEnable OBJECT-TYPE - SYNTAX TruthValue - ACCESS read-write - STATUS mandatory - DESCRIPTION - "Specified if dampening is enabled on this port." - REFERENCE - "" - DEFVAL { false } - ::= { rldot1dStpPortEntry 2 } - -rldot1dStpPortDampStable OBJECT-TYPE - SYNTAX TruthValue - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Specified if the port is stable." - REFERENCE - "" - DEFVAL { true } - ::= { rldot1dStpPortEntry 3 } - -rldot1dStpPortFilterBpdu OBJECT-TYPE - SYNTAX TruthValue - ACCESS read-write - STATUS mandatory - DESCRIPTION - "Specified if this port should filter bpdus when stp is disabled." - REFERENCE - "" - DEFVAL { false } - ::= { rldot1dStpPortEntry 4 } - -rldot1dStpPortBpduSent OBJECT-TYPE - SYNTAX Counter-32 - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Specified the number of bpdu sent from this port." - REFERENCE - "" - ::= { rldot1dStpPortEntry 5 } - -rldot1dStpPortBpduReceived OBJECT-TYPE - SYNTAX Counter-32 - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Specified the number of bpdu received in this port." - REFERENCE - "" - ::= { rldot1dStpPortEntry 6 } - -rldot1dStpPortRole OBJECT-TYPE - SYNTAX INTEGER { - unknown(0), - disabled(1), - alternate(2), - backup(3), - root(4), - designated(5) - } - - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Specified the role of this this port." - REFERENCE - "" - ::= { rldot1dStpPortEntry 7 } - -rldot1dStpBpduType OBJECT-TYPE - SYNTAX INTEGER { - stp(0), - rstp(1) - } - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Specified the type of BPDU transmitted by this port." - ::= { rldot1dStpPortEntry 8 } - -rldot1dStpPortRestrictedRole OBJECT-TYPE - SYNTAX TruthValue - ACCESS read-write - STATUS mandatory - DESCRIPTION - "If TRUE causes the Port not to be selected as Root Port for the CIST or - any MSTI, even if it has the best spanning tree priority vector. - Such a Port will be selected as an Alternate Port after the Root Port - has been selected." - REFERENCE - "IEEE 802.1ad-D3-1: Section 13.24.29" - DEFVAL { false } - ::= { rldot1dStpPortEntry 9 } - -rldot1dStpPortAutoEdgePort OBJECT-TYPE - SYNTAX TruthValue - ACCESS read-write - STATUS mandatory - DESCRIPTION - "If TRUE causes the Port when become up, to enter the blocking state, - and if during 3 seconds it doesn't receive a BPDU, it will enter - the forwarding state." - REFERENCE - "IEEE 802.1D-2004: Section 17.13.3" - DEFVAL { false } - ::= { rldot1dStpPortEntry 10 } - -rldot1dStpPortLoopback OBJECT-TYPE - SYNTAX TruthValue - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Specified loopback was detected on port." - REFERENCE - "" - ::= { rldot1dStpPortEntry 11 } - -rldot1dStpPortsEnable OBJECT-TYPE - SYNTAX TruthValue - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Enable / Disable spanning tree on ports by default ." - DEFVAL { true } - ::= { rldot1dStp 14 } - -rldot1dStpTaggedFlooding OBJECT-TYPE - SYNTAX TruthValue - ACCESS read-only - STATUS mandatory - DESCRIPTION - "flooding can be done in tagged bpdu ." - ::= { rldot1dStp 15 } - -rldot1dStpPortBelongToVlanDefault OBJECT-TYPE - SYNTAX TruthValue - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The default value of rldot1dStpPortMustBelongToVlan ." - ::= { rldot1dStp 16 } - -rldot1dStpEnableByDefault OBJECT-TYPE - SYNTAX TruthValue - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The default value of rldot1dStpEnable ." - ::= { rldot1dStp 17 } - -rldot1dStpPortToDefault OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-write - STATUS mandatory - DESCRIPTION - "To order port/s to revert to default setings ." - ::= { rldot1dStp 18 } - -rldot1dStpSupportedType OBJECT-TYPE - SYNTAX INTEGER { - perDevice(1), - perVlan(2), - mstp(3) - } - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The type of stp supported by the device." - ::= { rldot1dStp 19 } - -rldot1dStpEdgeportSupportInStp OBJECT-TYPE - SYNTAX TruthValue - ACCESS read-only - STATUS mandatory - DESCRIPTION - "If EdgePort is supported in stpCompatible mode ." - ::= { rldot1dStp 20 } - -rldot1dStpFilterBpdu OBJECT-TYPE - SYNTAX TruthValue - ACCESS read-write - STATUS mandatory - DESCRIPTION - "Specified if the device should filter BPDUs when STP is disabled." - ::= { rldot1dStp 21 } - -rldot1dStpFloodBpduMethod OBJECT-TYPE - SYNTAX INTEGER { - classic(0), - bridging(1) } - ACCESS read-write - STATUS mandatory - DESCRIPTION - "Specified flooding method: - 1 - classic - untagged to all stp disabled ports - 2 - bridging -normal bridging." - ::= { rldot1dStp 22 } - -rldot1dStpSeparatedBridges OBJECT IDENTIFIER ::= { rldot1dStp 23 } - --- --- rldot1dStpPortBpduGuardTable --- -rldot1dStpPortBpduGuardTable OBJECT-TYPE - SYNTAX SEQUENCE OF Rldot1dStpPortBpduGuardEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "A table that contains for each port whether it is bpdu guard ." - ::= { rldot1dStp 24 } - -rldot1dStpPortBpduGuardEntry OBJECT-TYPE - SYNTAX Rldot1dStpPortBpduGuardEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "A list of information maintained by every port - whether it is bpdu guard." - INDEX { dot1dBasePort } - ::= { rldot1dStpPortBpduGuardTable 1 } - -Rldot1dStpPortBpduGuardEntry ::= SEQUENCE { - rldot1dStpPortBpduGuardEnable TruthValue -} - - -rldot1dStpPortBpduGuardEnable OBJECT-TYPE - SYNTAX TruthValue - ACCESS read-write - STATUS mandatory - DESCRIPTION - "Specified if bpdu guard is enabled on this port." - REFERENCE - "" - DEFVAL { false } - ::= { rldot1dStpPortBpduGuardEntry 1 } - -rldot1dStpSeparatedBridgesTable OBJECT-TYPE - SYNTAX SEQUENCE OF Rldot1dStpSeparatedBridgesEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "Define if separated bridges feature is enabled for each interface." - ::= { rldot1dStpSeparatedBridges 1 } - -rldot1dStpSeparatedBridgesEntry OBJECT-TYPE - SYNTAX Rldot1dStpSeparatedBridgesEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "Defines the contents of each line in the rlSeparatedBridgesTable table." - INDEX { ifIndex } - ::= { rldot1dStpSeparatedBridgesTable 1 } - -Rldot1dStpSeparatedBridgesEntry ::= SEQUENCE { - rldot1dStpSeparatedBridgesPortEnable TruthValue -} - -rldot1dStpSeparatedBridgesPortEnable OBJECT-TYPE - SYNTAX TruthValue - ACCESS read-write - STATUS mandatory - DESCRIPTION - "This variable indicates whether the separated bridge feature is enabled on a specified ifIndex." - DEFVAL { false } - ::= { rldot1dStpSeparatedBridgesEntry 1 } - -rldot1dStpSeparatedBridgesEnable OBJECT-TYPE - SYNTAX TruthValue - ACCESS read-write - STATUS mandatory - DESCRIPTION - "Enable / Disable Separated Bridges Feature." - DEFVAL { false } - ::= { rldot1dStpSeparatedBridges 2 } - -rldot1dStpSeparatedBridgesAutoConfig OBJECT-TYPE - SYNTAX TruthValue - ACCESS read-write - STATUS mandatory - DESCRIPTION - "Enable / Disable Separated Bridges Automatic Configuration." - DEFVAL { false } - ::= { rldot1dStpSeparatedBridges 3 } - -rldot1dExtBase OBJECT IDENTIFIER ::= { rlpBridgeMIBObjects 3 } - -rldot1dExtBaseMibVersion OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-only - STATUS mandatory - DESCRIPTION - "MIB's version, the current version is 1." - ::= { rldot1dExtBase 1 } - -rldot1dDeviceCapabilities OBJECT-TYPE --- SYNTAX BITS { --- rldot1dIGMPSnoopingFilteringServices(0) --- ## can perform filtering of --- ## individual multicast addresses --- ## controlled by IGMP snooping. --- rldot1dDefaultFilteringAllServices(1) --- ## can perform default filtering --- ## behavior for All multicast addresses. --- ## controlled by Multicast DB. --- rldot1dDefaultFilteringUnregServices(2) --- ## can perform default filtering --- ## behavior for Unregistered --- ## multicast addresses. --- ## controlled by Multicast DB. --- } - SYNTAX OCTET STRING (SIZE(1)) - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Indicates the optional parts of private extension of - IEEE 802.1D and 802.1Q that are implemented by this - device and are manageable through this MIB. - Capabilities that are allowed on a per-port basis are - indicated in dot1dPortCapabilities." - ::= { rldot1dExtBase 2 } - -rldot1wRStp OBJECT IDENTIFIER ::= { rlpBridgeMIBObjects 4 } - --- --- rldot1wStpVlanEdgePortTable --- -rldot1wRStpVlanEdgePortTable OBJECT-TYPE - SYNTAX SEQUENCE OF Rldot1wRStpVlanEdgePortEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "A table that contains pair specific information - for the Rapid Spanning Tree Protocol." - ::= { rldot1wRStp 1 } - -rldot1wRStpVlanEdgePortEntry OBJECT-TYPE - SYNTAX Rldot1wRStpVlanEdgePortEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "A list of information maintained by every pair - about the RAPID Spanning Tree Protocol state for that pair." - INDEX { rldot1wRStpVlanEdgePortVlan, rldot1wRStpVlanEdgePortPort } - ::= { rldot1wRStpVlanEdgePortTable 1 } - -Rldot1wRStpVlanEdgePortEntry ::= SEQUENCE { - rldot1wRStpVlanEdgePortVlan INTEGER, - rldot1wRStpVlanEdgePortPort INTEGER, - rldot1wRStpEdgePortStatus TruthValue -} - -rldot1wRStpVlanEdgePortVlan OBJECT-TYPE - SYNTAX INTEGER (1..4095) - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The Vlan number that the port belongs to, and for which this entry - contains Spanning Tree Protocol management information, - If STP per device then only one value of 1 is allowed. - If STP per a VLAN then all value of 1..4095 are allowed." - ::= { rldot1wRStpVlanEdgePortEntry 1 } - -rldot1wRStpVlanEdgePortPort OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The port number of the port for which this entry - contains Spanning Tree Protocol management information." - ::= { rldot1wRStpVlanEdgePortEntry 2 } - -rldot1wRStpEdgePortStatus OBJECT-TYPE - SYNTAX TruthValue - ACCESS read-write - STATUS mandatory - DESCRIPTION - "Specifies whether this port is an Edge Port or not" - REFERENCE - "IEEE 802.1wd6-2000: Section 17.13.3.1 " - DEFVAL { false } - ::= { rldot1wRStpVlanEdgePortEntry 3 } - --- --- rldot1wStpForceVersionTable --- -rldot1wRStpForceVersionTable OBJECT-TYPE - SYNTAX SEQUENCE OF Rldot1wRStpForceVersionEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "A table that contains specific information - for the Rapid Spanning Tree Protocol." - ::= { rldot1wRStp 2 } - -rldot1wRStpForceVersionEntry OBJECT-TYPE - SYNTAX Rldot1wRStpForceVersionEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "A list of information maintained by every - about the RAPID Spanning Tree Protocol state for that pair." - INDEX { rldot1wRStpForceVersionVlan } - ::= { rldot1wRStpForceVersionTable 1 } - -Rldot1wRStpForceVersionEntry ::= SEQUENCE { - rldot1wRStpForceVersionVlan INTEGER, - rldot1wRStpForceVersionState INTEGER -} - -rldot1wRStpForceVersionVlan OBJECT-TYPE - SYNTAX INTEGER (1..4095) - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The Vlan number that the port belongs to, and for which this entry - contains Spanning Tree Protocol management information, - If STP per device then only one value of 1 is allowed. - If STP per a VLAN then all value of 1..4095 are allowed." - ::= { rldot1wRStpForceVersionEntry 1 } - -rldot1wRStpForceVersionState OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-write - STATUS mandatory - DESCRIPTION - "Specifies whether this Bridge uses the normal RSTP algorithm, - or STP Compatibility algorythm: - 0 - STP Compatibility - 2 - Normal RSTP" - REFERENCE - "IEEE 802.1wd9-2000: Section 17.16.1 " - DEFVAL { 2 } - ::= { rldot1wRStpForceVersionEntry 2 } - -rldot1pPriorityMap OBJECT IDENTIFIER ::= { rlpBridgeMIBObjects 5 } - -rldot1pPriorityMapState OBJECT-TYPE - SYNTAX INTEGER { - enable (1), - disable (2) - } - ACCESS read-write - STATUS mandatory - DESCRIPTION - "enable / disable" - ::= { rldot1pPriorityMap 1 } - -rldot1pPriorityMapTable OBJECT-TYPE - SYNTAX SEQUENCE OF Rldot1pPriorityMapEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "This table hold information the priority maps" - ::= { rldot1pPriorityMap 2 } - -rldot1pPriorityMapEntry OBJECT-TYPE - SYNTAX Rldot1pPriorityMapEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "The row definition for this table." - INDEX { rldot1pPriorityMapName } - ::= { rldot1pPriorityMapTable 1 } - -Rldot1pPriorityMapEntry ::= SEQUENCE { - rldot1pPriorityMapName DisplayString, - rldot1pPriorityMapPriority OCTET STRING, - rldot1pPriorityMapPort PortList, - rldot1pPriorityMapPortList PortList, - rldot1pPriorityMapStatus RowStatus -} - -rldot1pPriorityMapName OBJECT-TYPE - SYNTAX DisplayString (SIZE (1..25)) - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The map name" - ::= { rldot1pPriorityMapEntry 1 } - -rldot1pPriorityMapPriority OBJECT-TYPE - SYNTAX OCTET STRING (SIZE (8)) - ACCESS read-write - STATUS mandatory - DESCRIPTION - "The map holding the queue" - ::= { rldot1pPriorityMapEntry 2 } - -rldot1pPriorityMapPort OBJECT-TYPE - SYNTAX PortList - ACCESS read-write - STATUS mandatory - DESCRIPTION - "the port that the map, is applied on in config" - ::= { rldot1pPriorityMapEntry 3 } - -rldot1pPriorityMapPortList OBJECT-TYPE - SYNTAX PortList - ACCESS read-only - STATUS mandatory - DESCRIPTION - "the ports that the map, is applied on in actual" - ::= { rldot1pPriorityMapEntry 4 } - -rldot1pPriorityMapStatus OBJECT-TYPE - SYNTAX RowStatus - ACCESS read-write - STATUS mandatory - DESCRIPTION - "The status of the table entry. It's used to delete an entry" - ::= { rldot1pPriorityMapEntry 5 } - -rldot1sMstp OBJECT IDENTIFIER ::= { rlpBridgeMIBObjects 6 } - --- --- The Multiple Spanning Tree Instance Table --- -rldot1sMstpInstanceTable OBJECT-TYPE - SYNTAX SEQUENCE OF Rldot1sMstpInstanceEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "A table that contains Mstp instance specific information - for the Multiple Spanning Tree Protocol." - ::= { rldot1sMstp 1 } - -rldot1sMstpInstanceEntry OBJECT-TYPE - SYNTAX Rldot1sMstpInstanceEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "A list of information maintained by every instance - about the multiple Spanning Tree Protocol state for - that instance." - INDEX { rldot1sMstpInstanceId } - ::= { rldot1sMstpInstanceTable 1 } - -Rldot1sMstpInstanceEntry ::= SEQUENCE { - rldot1sMstpInstanceId INTEGER, - rldot1sMstpInstanceEnable TruthValue, - rldot1sMstpInstanceTimeSinceTopologyChange TimeTicks, - rldot1sMstpInstanceTopChanges Counter, - rldot1sMstpInstanceDesignatedRoot BridgeId, - rldot1sMstpInstanceRootCost INTEGER, - rldot1sMstpInstanceRootPort INTEGER, - rldot1sMstpInstanceMaxAge Timeout, - rldot1sMstpInstanceHelloTime Timeout, - rldot1sMstpInstanceHoldTime INTEGER, - rldot1sMstpInstanceForwardDelay Timeout, - rldot1sMstpInstancePriority INTEGER, - rldot1sMstpInstanceRemainingHopes INTEGER -} - -rldot1sMstpInstanceId OBJECT-TYPE - SYNTAX INTEGER (1..64) - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The Instance index." - ::= { rldot1sMstpInstanceEntry 1 } - -rldot1sMstpInstanceEnable OBJECT-TYPE - SYNTAX TruthValue - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Specifies whether this Instance is STP enable or disable" - REFERENCE - " ?? " - ::= { rldot1sMstpInstanceEntry 2 } - -rldot1sMstpInstanceTimeSinceTopologyChange OBJECT-TYPE - SYNTAX TimeTicks - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The time (in hundredths of a second) since the - last time a topology change was detected by the - Mstp Instance ." - REFERENCE - "IEEE 802.1D-1990: Section 6.8.1.1.3" - ::= { rldot1sMstpInstanceEntry 3 } - -rldot1sMstpInstanceTopChanges OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The total number of topology changes detected by - this Instance since the management entity was last - reset or initialized." - REFERENCE - "IEEE 802.1D-1990: Section 6.8.1.1.3" - ::= { rldot1sMstpInstanceEntry 4 } - -rldot1sMstpInstanceDesignatedRoot OBJECT-TYPE - SYNTAX BridgeId - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The bridge identifier of the root of the spanning - tree as determined by the Muliple Spanning Tree Protocol - as executed by this node. This value is used as - the Root Identifier parameter in all Configuration - Bridge PDUs originated by this node." - REFERENCE - "IEEE 802.1D-1990: Section 4.5.3.1" - ::= { rldot1sMstpInstanceEntry 5 } - -rldot1sMstpInstanceRootCost OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The cost of the path to the root as seen from - this bridge." - REFERENCE - "IEEE 802.1D-1990: Section 4.5.3.2" - ::= { rldot1sMstpInstanceEntry 6 } - -rldot1sMstpInstanceRootPort OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The port number of the port which offers the - lowest cost path from this bridge to the root - bridge." - REFERENCE - "IEEE 802.1D-1990: Section 4.5.3.3" - ::= { rldot1sMstpInstanceEntry 7 } - -rldot1sMstpInstanceMaxAge OBJECT-TYPE - SYNTAX Timeout - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The maximum age of Spanning Tree Protocol - information learned from the network on any port - before it is discarded, in units of hundredths of - a second. This is the actual value that this - bridge is currently using." - REFERENCE - "IEEE 802.1D-1990: Section 4.5.3.4" - ::= { rldot1sMstpInstanceEntry 8 } - -rldot1sMstpInstanceHelloTime OBJECT-TYPE - SYNTAX Timeout - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The amount of time between the transmission of - Configuration bridge PDUs by this node on any port - when it is the root of the spanning tree or trying - to become so, in units of hundredths of a second. - This is the actual value that this bridge is - currently using." - REFERENCE - "IEEE 802.1D-1990: Section 4.5.3.5" - ::= { rldot1sMstpInstanceEntry 9 } - -rldot1sMstpInstanceHoldTime OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-only - STATUS mandatory - DESCRIPTION - "This time value determines the interval length - during which no more than two Configuration bridge - PDUs shall be transmitted by this node, in units - of hundredths of a second." - REFERENCE - "IEEE 802.1D-1990: Section 4.5.3.14" - ::= { rldot1sMstpInstanceEntry 10 } - -rldot1sMstpInstanceForwardDelay OBJECT-TYPE - SYNTAX Timeout - ACCESS read-only - STATUS mandatory - DESCRIPTION - "This time value, measured in units of hundredths - of a second, controls how fast a port changes its - spanning state when moving towards the Forwarding - state. The value determines how long the port - stays in each of the Listening and Learning - states, which precede the Forwarding state. This - value is also used, when a topology change has - been detected and is underway, to age all dynamic - entries in the Forwarding Database. [Note that - this value is the one that this bridge is - currently using, in contrast to - dot1dStpBridgeForwardDelay which is the value that - this bridge and all others would start using - if/when this bridge were to become the root.]" - REFERENCE - "IEEE 802.1D-1990: Section 4.5.3.6" - ::= { rldot1sMstpInstanceEntry 11 } - -rldot1sMstpInstancePriority OBJECT-TYPE - SYNTAX INTEGER (0..61440) - ACCESS read-write - STATUS mandatory - DESCRIPTION - "The value of the write-able portion of the Bridge - ID, i.e., the first four bits of the first octet - of the (8 octet long) Bridge ID.The value is a product - of 4096. The next 12 bit are the msti id . - The other (last) 6 octets of the Bridge ID are given - by the value of dot1dBaseBridgeAddress." - REFERENCE - "IEEE 802.1S-2001: Section 13.24.2" - ::= {rldot1sMstpInstanceEntry 12 } - -rldot1sMstpInstanceRemainingHopes OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-only - STATUS mandatory - DESCRIPTION - "This count value determines the amount of hopes - the information transmited by this bridge on this - instance can travel." - REFERENCE - "IEEE 802.1D-1990: Section 4.5.3.14" - ::= { rldot1sMstpInstanceEntry 13 } - --- --- rldot1sMstpInstancePortTable --- -rldot1sMstpInstancePortTable OBJECT-TYPE - SYNTAX SEQUENCE OF Rldot1sMstpInstancePortEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "A table that contains pair specific information - for the Spanning Tree Protocol." - ::= { rldot1sMstp 2 } - -rldot1sMstpInstancePortEntry OBJECT-TYPE - SYNTAX Rldot1sMstpInstancePortEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "A list of information maintained by every pair - about the Spanning Tree Protocol state for that pair." - INDEX { rldot1sMstpInstancePortMstiId, rldot1sMstpInstancePortPort } - ::= { rldot1sMstpInstancePortTable 1 } - -Rldot1sMstpInstancePortEntry ::= SEQUENCE { - rldot1sMstpInstancePortMstiId INTEGER, - rldot1sMstpInstancePortPort INTEGER, - rldot1sMstpInstancePortPriority INTEGER, - rldot1sMstpInstancePortState INTEGER, - rldot1sMstpInstancePortEnable INTEGER, - rldot1sMstpInstancePortPathCost INTEGER, - rldot1sMstpInstancePortDesignatedRoot BridgeId, - rldot1sMstpInstancePortDesignatedCost INTEGER, - rldot1sMstpInstancePortDesignatedBridge BridgeId, - rldot1sMstpInstancePortDesignatedPort OCTET STRING, - rldot1sMstpInstancePortForwardTransitions Counter, - rldot1sMStpInstancePortAdminPathCost INTEGER, - rldot1sMStpInstancePortRole INTEGER - -} - -rldot1sMstpInstancePortMstiId OBJECT-TYPE - SYNTAX INTEGER (1..64) - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The Vlan group number that the port belongs to, and for which this entry - contains Spanning Tree Protocol management - information." - REFERENCE - "IEEE 802.1s/D11-2001 " - ::= { rldot1sMstpInstancePortEntry 1 } - -rldot1sMstpInstancePortPort OBJECT-TYPE - SYNTAX INTEGER (1..4096) - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The port number of the port for which this entry - contains Spanning Tree Protocol management - information." - REFERENCE - "IEEE 802.1t/D2-1999: Section 9.2.6" - ::= { rldot1sMstpInstancePortEntry 2 } - -rldot1sMstpInstancePortPriority OBJECT-TYPE - SYNTAX INTEGER (0..240) - ACCESS read-write - STATUS mandatory - DESCRIPTION - "The value of the priority field which is - contained in the more significant 4 bits of the most - significant octet of the (2 octet long) Port ID. - The value is a product of 16. - The other octet of the Port ID is given by the value - of rldot1dStpVlanGroupPort." - REFERENCE - "IEEE 802.1t/D2-1999: Section 9.2.6" - ::= { rldot1sMstpInstancePortEntry 3 } - -rldot1sMstpInstancePortState OBJECT-TYPE - SYNTAX INTEGER { - disabled(1), - blocking(2), - listening(3), - learning(4), - forwarding(5), - broken(6) - } - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The port's current state as defined by application of - the Spanning Tree Protocol. This state controls what - action a port takes on reception of a frame. - If the bridge has detected a port that is malfunctioning - it will place that port into the broken(6) state. For ports - which are disabled (see dot1dStpVlanPortEnable), this object - will have a value of disabled(1)." - REFERENCE - "IEEE 802.1D-1990: Section 4.5.5.2" - ::= { rldot1sMstpInstancePortEntry 4 } - -rldot1sMstpInstancePortEnable OBJECT-TYPE - SYNTAX INTEGER { - enabled(1), - disabled(2) - } - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The enabled/disabled status of the port." - REFERENCE - "IEEE 802.1D-1990: Section 4.5.5.2" - ::= { rldot1sMstpInstancePortEntry 5 } - -rldot1sMstpInstancePortPathCost OBJECT-TYPE - SYNTAX INTEGER (1..200000000) - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The contribution of this port to the path cost of - paths towards the spanning tree root which include - this port. 802.1D-1990 recommends that the - default value of this parameter be in inverse - proportion to the speed of the attached LAN." - REFERENCE - "IEEE 802.1D-1990: Section 4.5.5.3" - ::= { rldot1sMstpInstancePortEntry 6 } - -rldot1sMstpInstancePortDesignatedRoot OBJECT-TYPE - SYNTAX BridgeId - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The unique Bridge Identifier of the Bridge - recorded as the Root in the Configuration BPDUs - transmitted by the Designated Bridge for the - segment to which the port is attached." - REFERENCE - "IEEE 802.1D-1990: Section 4.5.5.4" - ::= { rldot1sMstpInstancePortEntry 7 } - -rldot1sMstpInstancePortDesignatedCost OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The path cost of the Designated Port of the - segment connected to this port. This value is - compared to the Root Path Cost field in received - bridge PDUs." - REFERENCE - "IEEE 802.1D-1990: Section 4.5.5.5" - ::= { rldot1sMstpInstancePortEntry 8 } - -rldot1sMstpInstancePortDesignatedBridge OBJECT-TYPE - SYNTAX BridgeId - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The Bridge Identifier of the bridge which this - port considers to be the Designated Bridge for - this port's segment." - REFERENCE - "IEEE 802.1D-1990: Section 4.5.5.6" - ::= { rldot1sMstpInstancePortEntry 9 } - -rldot1sMstpInstancePortDesignatedPort OBJECT-TYPE - SYNTAX OCTET STRING (SIZE (2)) - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The Port Identifier of the port on the Designated - Bridge for this port's segment." - REFERENCE - "IEEE 802.1D-1990: Section 4.5.5.7" - ::= { rldot1sMstpInstancePortEntry 10 } - -rldot1sMstpInstancePortForwardTransitions OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of times this port has transitioned - from the Learning state to the Forwarding state." - ::= { rldot1sMstpInstancePortEntry 11 } - -rldot1sMStpInstancePortAdminPathCost OBJECT-TYPE - SYNTAX INTEGER (0..200000000) - ACCESS read-write - STATUS mandatory - DESCRIPTION - "The administratively assigned value for the contribution - of this port to the path cost of paths towards the spanning - tree root. - - Writing a value of '0' assigns the automatically calculated - default Path Cost value to the port. If the default Path - Cost is being used, this object returns '0' when read. - - This complements the object dot1dStpPortPathCost, which - returns the operational value of the path cost." - REFERENCE - "IEEE 802.1D-1998: Section 8.5.5.3" - ::= { rldot1sMstpInstancePortEntry 12 } - -rldot1sMStpInstancePortRole OBJECT-TYPE - SYNTAX INTEGER { - unknown(0), - disabled(1), - alternate(2), - backup(3), - root(4), - designated(5), - master(6) - } - - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Specify the role of this this port." - REFERENCE - "" - ::= { rldot1sMstpInstancePortEntry 13 } - -rldot1sMstpMaxHopes OBJECT-TYPE - SYNTAX INTEGER (1..40) - ACCESS read-write - STATUS mandatory - DESCRIPTION - "Max number of hopes that an MST BPDU will travel inside a region." - DEFVAL { 20 } - ::= { rldot1sMstp 3 } - -rldot1sMstpConfigurationName OBJECT-TYPE - SYNTAX SnmpAdminString - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The active configuration name as will be caried in MST BPDU's." - ::= { rldot1sMstp 4 } - -rldot1sMstpRevisionLevel OBJECT-TYPE - SYNTAX INTEGER (0..65535) - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The active revision level." - DEFVAL { 0 } - ::= { rldot1sMstp 5 } - --- --- rldot1sMstpVlanTable --- -rldot1sMstpVlanTable OBJECT-TYPE - SYNTAX SEQUENCE OF Rldot1sMstpVlanEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "A table that contains information about the alocation of vlans to groups." - ::= { rldot1sMstp 6 } - -rldot1sMstpVlanEntry OBJECT-TYPE - SYNTAX Rldot1sMstpVlanEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "A list of information maintained by every vlan - about the group it belongs to." - INDEX { rldot1sMstpVlan } - ::= { rldot1sMstpVlanTable 1 } - -Rldot1sMstpVlanEntry ::= SEQUENCE { - rldot1sMstpVlan INTEGER, - rldot1sMstpGroup INTEGER, - rldot1sMstpPendingGroup INTEGER - -} - -rldot1sMstpVlan OBJECT-TYPE - SYNTAX INTEGER (1..4094) - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The vlan number of the vlan for which this entry - contains Spanning Tree Protocol management - information." - REFERENCE - "IEEE 802.1s/D11-2001: Section 13.7" - ::= { rldot1sMstpVlanEntry 1 } - -rldot1sMstpGroup OBJECT-TYPE - SYNTAX INTEGER (0..64) - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Specifid the active group number this vlan belonges to." - REFERENCE - "" - DEFVAL { 0 } - ::= { rldot1sMstpVlanEntry 2 } - -rldot1sMstpPendingGroup OBJECT-TYPE - SYNTAX INTEGER (0..64) - ACCESS read-write - STATUS mandatory - DESCRIPTION - "Specifid the pending group number this vlan belonges to." - REFERENCE - "" - DEFVAL { 0 } - ::= { rldot1sMstpVlanEntry 3 } - --- --- rldot1sMstpExtPortTable --- -rldot1sMstpExtPortTable OBJECT-TYPE - SYNTAX SEQUENCE OF Rldot1sMstpExtPortEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "A table that contains MSTP information about ports of the CIST." - ::= { rldot1sMstp 7 } - -rldot1sMstpExtPortEntry OBJECT-TYPE -SYNTAX Rldot1sMstpExtPortEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "A list of information maintained by every port - of the CIST." - INDEX { rldot1sMstpExtPortPort } - ::= { rldot1sMstpExtPortTable 1 } - -Rldot1sMstpExtPortEntry ::= SEQUENCE { - rldot1sMstpExtPortPort INTEGER, - rldot1sMstpExtPortInternalOperPathCost INTEGER, - rldot1sMstpExtPortDesignatedRegionalRoot BridgeId, - rldot1sMstpExtPortDesignatedRegionalCost INTEGER, - rldot1sMstpExtPortBoundary TruthValue, - rldot1sMstpExtPortInternalAdminPathCost INTEGER - -} -rldot1sMstpExtPortPort OBJECT-TYPE - SYNTAX INTEGER (1..4096) - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The port number of the port for which this entry - contains Spanning Tree Protocol management - information." - REFERENCE - "IEEE 802.1t/D2-1999: Section 9.2.6" - ::= { rldot1sMstpExtPortEntry 1 } - -rldot1sMstpExtPortInternalOperPathCost OBJECT-TYPE - SYNTAX INTEGER (1..200000000) - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The contribution of this port to the path cost of - paths towards the spanning tree regional root which - include this port. 802.1S-2002 recommends that the - default value of this parameter be in inverse - proportion to the speed of the attached LAN." - ::= { rldot1sMstpExtPortEntry 2 } - -rldot1sMstpExtPortDesignatedRegionalRoot OBJECT-TYPE - SYNTAX BridgeId - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The unique Bridge Identifier of the Bridge - recorded as the Root in the Configuration BPDUs - transmitted by the Designated Bridge for the - segment to which the port is attached." - REFERENCE - "IEEE 802.1D-1990: Section 4.5.5.4" - ::= { rldot1sMstpExtPortEntry 3 } - -rldot1sMstpExtPortDesignatedRegionalCost OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The regional path cost of the Designated Port of the - segment connected to this port. This value is - compared to the Root Path Cost field in received - bridge PDUs." - REFERENCE - "IEEE 802.1D-1990: Section 4.5.5.5" - ::= { rldot1sMstpExtPortEntry 4 } - -rldot1sMstpExtPortBoundary OBJECT-TYPE - SYNTAX TruthValue - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Indication if the port is conented to to a lan segment - outside or inside the region." - REFERENCE - "IEEE 802.1D-1990: Section 4.5.5.5" - ::= { rldot1sMstpExtPortEntry 5 } - -rldot1sMstpExtPortInternalAdminPathCost OBJECT-TYPE - SYNTAX INTEGER (0..200000000) - ACCESS read-write - STATUS mandatory - DESCRIPTION - "The administratively assigned value for the contribution - of this port to the path cost of paths towards the spanning - tree root. - - Writing a value of '0' assigns the automatically calculated - default Path Cost value to the port. If the default Path - Cost is being used, this object returns '0' when read. - - This complements the object dot1dStpPortPathCost, which - returns the operational value of the path cost." - - ::= { rldot1sMstpExtPortEntry 6 } - -rldot1sMstpDesignatedMaxHopes OBJECT-TYPE - SYNTAX INTEGER (1..40) - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Max number of hopes that an MST BPDU will travel inside a region." - ::= { rldot1sMstp 8 } - -rldot1sMstpRegionalRoot OBJECT-TYPE - SYNTAX BridgeId - ACCESS read-only - STATUS mandatory - DESCRIPTION - "CIST Regional Root Identifier (13.16.4). - The Bridge Identifier of the current CIST Regional Root." - REFERENCE - "IEEE 802.1S-2002: Section 13.16.4" - ::= { rldot1sMstp 9 } - -rldot1sMstpRegionalRootCost OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The CIST path cost from the transmitting Bridge to the - CIST Regional Root." - REFERENCE - "IEEE 802.1S-2002: Section 12.8.1.1.3" - ::= { rldot1sMstp 10 } - -rldot1sMstpPendingConfigurationName OBJECT-TYPE - SYNTAX SnmpAdminString (SIZE(1..32)) - ACCESS read-write - STATUS mandatory - DESCRIPTION - "The pending configuration name." - ::= { rldot1sMstp 11 } - -rldot1sMstpPendingRevisionLevel OBJECT-TYPE - SYNTAX INTEGER (0..65535) - ACCESS read-write - STATUS mandatory - DESCRIPTION - "The pending revision level." - DEFVAL { 0 } - ::= { rldot1sMstp 12 } - -rldot1sMstpPendingAction OBJECT-TYPE - SYNTAX INTEGER { - copyPendingActive(1), - copyActivePending(2) - } - ACCESS read-write - STATUS mandatory - DESCRIPTION - "The action to be done with the pending configuration. - copyPendingActive - to copy the pending mst configuration to the active one. - copyActivePending - to copy the active mst configuration to the pending one. " - ::= { rldot1sMstp 13 } - -rldot1sMstpRemainingHops OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-only - STATUS mandatory - DESCRIPTION - "This count value determines the amount of hops - the information transmitted by this bridge can travel." - ::= { rldot1sMstp 14 } - -rldot1dTpAgingTime OBJECT IDENTIFIER ::= { rlpBridgeMIBObjects 7 } - -rldot1dTpAgingTimeMin OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The min timeout period in seconds for aging out - dynamically learned forwarding information." - REFERENCE - "P802.1d/D9, July 14, 1989: Section 6.7.1.1.3" - ::= { rldot1dTpAgingTime 1 } - -rldot1dTpAgingTimeMax OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The max timeout period in seconds for aging out - dynamically learned forwarding information." - REFERENCE - "P802.1d/D9, July 14, 1989: Section 6.7.1.1.3" - ::= { rldot1dTpAgingTime 2 } - - -rlTelnet OBJECT IDENTIFIER ::= { rnd 58 } - -rlTelnetMibVersion OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-only - STATUS mandatory - DESCRIPTION - "MIB's version, the current version is 1." - ::= { rlTelnet 1 } - -rlTelnetPassword OBJECT-TYPE - SYNTAX DisplayString (SIZE(0..20)) - ACCESS read-write - STATUS mandatory - DESCRIPTION - "Telnet Password" - ::= { rlTelnet 2 } - -rlTelnetTimeout OBJECT-TYPE - SYNTAX INTEGER (0..65535) - ACCESS read-write - STATUS mandatory - DESCRIPTION - "The number of minutes after which the TCP connection is closed - if no activity is detected from the Client" - DEFVAL {0} - ::= { rlTelnet 3 } - -rlTelnetUsersTable OBJECT-TYPE - SYNTAX SEQUENCE OF RlTelnetUsersEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "This table hold information about current telnet sessions" - ::= { rlTelnet 4 } - -rlTelnetUsersEntry OBJECT-TYPE - SYNTAX RlTelnetUsersEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "The row definition for this table." - INDEX { rlTelnetSessionId } - ::= { rlTelnetUsersTable 1 } - -RlTelnetUsersEntry ::= SEQUENCE { - rlTelnetSessionId INTEGER, - rlTelnetSessionClientAddress IpAddress, - rlTelnetSessionLoginTime DisplayString, - rlTelnetSessionStatus INTEGER -} - -rlTelnetSessionId OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Telnet Session ID" - ::= { rlTelnetUsersEntry 1 } - -rlTelnetSessionClientAddress OBJECT-TYPE - SYNTAX IpAddress - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Telnet Session Client IP address" - ::= { rlTelnetUsersEntry 2 } - -rlTelnetSessionLoginTime OBJECT-TYPE - SYNTAX DisplayString - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Telnet Session Login Time string" - ::= { rlTelnetUsersEntry 3 } - -rlTelnetSessionStatus OBJECT-TYPE - SYNTAX INTEGER { - connected(1), - disconnect(2) - } - ACCESS read-write - STATUS mandatory - DESCRIPTION - "Telnet Session status. After status has been set to diconnect the - sessions is closed and the matching entry is deleted from the table." - ::= { rlTelnetUsersEntry 4 } - -rlTelnetLoginBanner OBJECT-TYPE - SYNTAX DisplayString - ACCESS read-write - STATUS mandatory - DESCRIPTION - "Telnet Login Banner. When telnet connection is established, - the banner is the concatanation of this MIB and rlTelnetSecondLoginBanner." - ::= { rlTelnet 5 } - -rlTelnetSecondLoginBanner OBJECT-TYPE - SYNTAX DisplayString - ACCESS read-write - STATUS mandatory - DESCRIPTION - "Telnet Login Banner Extension. When telnet connection is established, - the banner is the concatanation of rlTelnetLoginBanner and this MIB" - ::= { rlTelnet 6 } - - -rlPolicy OBJECT IDENTIFIER ::= { rnd 59 } - -rlArpSpoofing OBJECT IDENTIFIER ::= { rnd 60 } - -rlArpSpoofingMibVersion OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-only - STATUS mandatory - DESCRIPTION - "MIB's version, the current version is 1." - ::= { rlArpSpoofing 1 } - -rlArpSpoofingTable OBJECT-TYPE - SYNTAX SEQUENCE OF RlArpSpoofingEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "A list of the ifIndexes, IP addresses and corresponding MAC addresses." - ::= { rlArpSpoofing 2 } - -rlArpSpoofingEntry OBJECT-TYPE - SYNTAX RlArpSpoofingEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "An entry of this table specifis ifIndex,IP Address and - MAC address." - INDEX { rlArpSpoofingIfIndex, rlArpSpoofingLocalIpAddr } - ::= { rlArpSpoofingTable 1 } - -RlArpSpoofingEntry ::= SEQUENCE { - rlArpSpoofingIfIndex InterfaceIndex, - rlArpSpoofingLocalIpAddr IpAddress, - rlArpSpoofingMacAddr PhysAddress, - rlArpSpoofingRemoteIpAddr IpAddress, - rlArpSpoofingOutPhysIfIndex InterfaceIndexOrZero, - rlArpSpoofingStatus RowStatus -} - -rlArpSpoofingIfIndex OBJECT-TYPE - SYNTAX InterfaceIndex - ACCESS read-write - STATUS mandatory - DESCRIPTION - "The physical interface for which this entry contains information." - ::= { rlArpSpoofingEntry 1 } - -rlArpSpoofingLocalIpAddr OBJECT-TYPE - SYNTAX IpAddress - ACCESS read-write - STATUS mandatory - DESCRIPTION - "Ip addres for which the device will send ARP reply (ARP spoofing)." - ::= { rlArpSpoofingEntry 2 } - -rlArpSpoofingMacAddr OBJECT-TYPE - SYNTAX PhysAddress - ACCESS read-write - STATUS mandatory - DESCRIPTION - "MAC addres with which the device will send ARP reply. - If the field is ommited or its value 0.0.0.0 the device will - send with the interface's MAC address." - ::= { rlArpSpoofingEntry 3 } - -rlArpSpoofingRemoteIpAddr OBJECT-TYPE - SYNTAX IpAddress - ACCESS read-write - STATUS mandatory - DESCRIPTION - "Ip addres for which the device will send periodically ARP requests - if its value differs from 0.0.0.0." - ::= { rlArpSpoofingEntry 4 } - -rlArpSpoofingOutPhysIfIndex OBJECT-TYPE - SYNTAX InterfaceIndexOrZero - ACCESS read-write - STATUS mandatory - DESCRIPTION - "The physical interface to which the device will send periodically - ARP requests if its value differs from 0. If its value is 0 then ARP - requests will send to all the VLAN's ports." - DEFVAL { 0 } - ::= { rlArpSpoofingEntry 5 } - -rlArpSpoofingStatus OBJECT-TYPE - SYNTAX RowStatus - ACCESS read-write - STATUS mandatory - DESCRIPTION - "It is used to insert, update or delete an entry" - ::= { rlArpSpoofingEntry 6 } - -rlMir OBJECT IDENTIFIER ::= { rnd 61 } - -rlMirMibVersion OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-only - STATUS mandatory - DESCRIPTION - "MIB's version, the current version is 1." - ::= { rlMir 1 } - -rlMirMaxNumOfMRIsAfterReset OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-write - STATUS mandatory - DESCRIPTION - "The maximun instanses of IP Multi Instance Routers after the - following reset." - DEFVAL { 1 } - ::= { rlMir 2 } - -rlMirMaxNumOfMRIs OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The maximun instanses of IP Multi Instance Routers." - ::= { rlMir 3 } - -rlMirCurMriNum OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-write - STATUS mandatory - DESCRIPTION - "The number of the MRI of which MIB variables are treated at - the same time by the SNMP agent." - ::= { rlMir 4 } - -rlMirInterfaceTable OBJECT-TYPE - SYNTAX SEQUENCE OF RlMirInterfaceEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "A list of the assignment ifinterfaces to IP Router instances." - ::= { rlMir 5 } - -rlMirInterfaceEntry OBJECT-TYPE - SYNTAX RlMirInterfaceEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "An entry of this table specifies the MRID assignement to a L2 - interfrace." - INDEX { rlMirInterfaceIfIndex } - ::= { rlMirInterfaceTable 1 } - -RlMirInterfaceEntry ::= SEQUENCE { - rlMirInterfaceIfIndex InterfaceIndex, - rlMirInterfaceMrid INTEGER -} - -rlMirInterfaceIfIndex OBJECT-TYPE - SYNTAX InterfaceIndex - ACCESS read-write - STATUS mandatory - DESCRIPTION - "The L2 interface for which this entry contains information." - ::= { rlMirInterfaceEntry 1 } - -rlMirInterfaceMrid OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-write - STATUS mandatory - DESCRIPTION - "Multi IP Router Instance Identifier to which the - interface is assgned." - DEFVAL { 0 } - ::= { rlMirInterfaceEntry 2 } - -rlMirVlanBaseReservedPortsTable OBJECT-TYPE - SYNTAX SEQUENCE OF RlMirVlanBaseReservedPortsEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "A list VLAN based reserved physical ports." - ::= { rlMir 6 } - -rlMirVlanBaseReservedPortsEntry OBJECT-TYPE - SYNTAX RlMirVlanBaseReservedPortsEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "A VLAN based reserved physical port." - INDEX { rlMirVlanBaseReservedPortsIfIndex } - ::= { rlMirVlanBaseReservedPortsTable 1 } - -RlMirVlanBaseReservedPortsEntry ::= SEQUENCE { - rlMirVlanBaseReservedPortsIfIndex InterfaceIndex, - rlMirVlanBaseReservedPortsStatus RowStatus -} - -rlMirVlanBaseReservedPortsIfIndex OBJECT-TYPE - SYNTAX InterfaceIndex - ACCESS read-write - STATUS mandatory - DESCRIPTION - "IfIndex of VLAN based reserved physical port." - ::= { rlMirVlanBaseReservedPortsEntry 1 } - -rlMirVlanBaseReservedPortsStatus OBJECT-TYPE - SYNTAX RowStatus - ACCESS read-write - STATUS mandatory - DESCRIPTION - "It is used to delete an entry" - ::= { rlMirVlanBaseReservedPortsEntry 2 } - -rlMirVlanBaseLogicalPortsTable OBJECT-TYPE - SYNTAX SEQUENCE OF RlMirVlanBaseLogicalPortsEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "A list VLAN based logical ports." - ::= { rlMir 7 } - -rlMirVlanBaseLogicalPortsEntry OBJECT-TYPE - SYNTAX RlMirVlanBaseLogicalPortsEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "A VLAN based logical point-to-point port." - INDEX { rlMirVlanBaseLogicalPortsIfIndex } - ::= { rlMirVlanBaseLogicalPortsTable 1 } - -RlMirVlanBaseLogicalPortsEntry ::= SEQUENCE { - rlMirVlanBaseLogicalPortsIfIndex InterfaceIndex, - rlMirVlanBaseLogicalPortsReservedIfIndex InterfaceIndex, - rlMirVlanBaseLogicalPortsVlanTag INTEGER, - rlMirVlanBaseLogicalPortsStatus RowStatus -} - -rlMirVlanBaseLogicalPortsIfIndex OBJECT-TYPE - SYNTAX InterfaceIndex - ACCESS read-write - STATUS mandatory - DESCRIPTION - "IfIndex of VLAN based Logical point-to-point port." - ::= { rlMirVlanBaseLogicalPortsEntry 1 } - -rlMirVlanBaseLogicalPortsReservedIfIndex OBJECT-TYPE - SYNTAX InterfaceIndex - ACCESS read-write - STATUS mandatory - DESCRIPTION - "IfIndex of VLAN based reserved physical port on which the logical - port is defined." - ::= { rlMirVlanBaseLogicalPortsEntry 2 } - -rlMirVlanBaseLogicalPortsVlanTag OBJECT-TYPE - SYNTAX INTEGER (1..4095) - ACCESS read-write - STATUS mandatory - DESCRIPTION - "VLAN tag." - ::= { rlMirVlanBaseLogicalPortsEntry 3 } - -rlMirVlanBaseLogicalPortsStatus OBJECT-TYPE - SYNTAX RowStatus - ACCESS read-write - STATUS mandatory - DESCRIPTION - "It is used to add, update and delete an entry" - ::= { rlMirVlanBaseLogicalPortsEntry 4 } - -rlIpMRouteStdMIB OBJECT IDENTIFIER ::= { rnd 62 } - -rl3sw2swTables OBJECT IDENTIFIER ::= { rnd 63 } - -rl3sw2swTablesPollingInterval OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-write - STATUS mandatory - DESCRIPTION - "The polling interval for dynamic 3SW/2SW tables in seconds." - DEFVAL { 3 } - ::= { rl3sw2swTables 1 } - -rlGvrp OBJECT IDENTIFIER ::= { rnd 64 } - -rlPortGvrpTimersTable OBJECT-TYPE - SYNTAX SEQUENCE OF RlPortGvrpTimersEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "A table of GVRP timer values for every bridge - port. This is indexed by dot1dBasePort." - ::= { rlGvrp 1 } - -rlPortGvrpTimersEntry OBJECT-TYPE - SYNTAX RlPortGvrpTimersEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "GVRP timer values for a bridge port." - INDEX { dot1dBasePort } - ::= { rlPortGvrpTimersTable 1 } - -RlPortGvrpTimersEntry ::= - SEQUENCE { - rlPortGvrpJoinTime TimeInterval, - rlPortGvrpLeaveTime TimeInterval, - rlPortGvrpLeaveAllTime TimeInterval, - rlPortGvrpOverrideGarp EnabledStatus - } - -rlPortGvrpJoinTime OBJECT-TYPE - SYNTAX TimeInterval - ACCESS read-write - STATUS mandatory - DESCRIPTION - "The GVRP Join time, in centiseconds." - DEFVAL { 20 } - ::= { rlPortGvrpTimersEntry 1 } - -rlPortGvrpLeaveTime OBJECT-TYPE - SYNTAX TimeInterval - ACCESS read-write - STATUS mandatory - DESCRIPTION - "The GVRP Leave time, in centiseconds." - DEFVAL { 60 } - ::= { rlPortGvrpTimersEntry 2 } - -rlPortGvrpLeaveAllTime OBJECT-TYPE - SYNTAX TimeInterval - ACCESS read-write - STATUS mandatory - DESCRIPTION - "The GVRP LeaveAll time, in centiseconds." - DEFVAL { 1000 } - ::= { rlPortGvrpTimersEntry 3 } - -rlPortGvrpOverrideGarp OBJECT-TYPE - SYNTAX EnabledStatus - ACCESS read-write - STATUS mandatory - DESCRIPTION - "If enabled{1}, GVRP timer values for this port are - determined by the values in this entry. Otherwise, they - are determined by the values in dot1dPortGarpTable." - DEFVAL { disabled } - ::= { rlPortGvrpTimersEntry 4 } - -rlGvrpSupported OBJECT-TYPE - SYNTAX TruthValue - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Is GVRP supported in this device or not" - ::= { rlGvrp 2 } - -rlGvrpMibVersion OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-only - STATUS mandatory - DESCRIPTION - "MIB's version, the current version is 3." - ::= { rlGvrp 3 } - --- rlPortGvrpStatisticsTable - -rlPortGvrpStatisticsTable OBJECT-TYPE - SYNTAX SEQUENCE OF RlPortGvrpStatisticsEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "A table of GVRP statistics values for every bridge - port. This is indexed by dot1dBasePort." - ::= { rlGvrp 4 } - -rlPortGvrpStatisticsEntry OBJECT-TYPE - SYNTAX RlPortGvrpStatisticsEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "GVRP statistics values for a bridge port." - INDEX { dot1dBasePort } - ::= { rlPortGvrpStatisticsTable 1 } - -RlPortGvrpStatisticsEntry ::= - SEQUENCE { - rlPortGvrpStatisticsRJE Counter, - rlPortGvrpStatisticsRJIn Counter, - rlPortGvrpStatisticsREmp Counter, - rlPortGvrpStatisticsRLIn Counter, - rlPortGvrpStatisticsRLE Counter, - rlPortGvrpStatisticsRLA Counter, - rlPortGvrpStatisticsSJE Counter, - rlPortGvrpStatisticsSJIn Counter, - rlPortGvrpStatisticsSEmp Counter, - rlPortGvrpStatisticsSLIn Counter, - rlPortGvrpStatisticsSLE Counter, - rlPortGvrpStatisticsSLA Counter, - rlPortGvrpStatisticsClear INTEGER - } - -rlPortGvrpStatisticsRJE OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of Join Empty Received on the port, - since the last clearance." - ::= { rlPortGvrpStatisticsEntry 1 } - -rlPortGvrpStatisticsRJIn OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of Join In Received on the port, - since the last clearance." - ::= { rlPortGvrpStatisticsEntry 2 } - -rlPortGvrpStatisticsREmp OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of Empty Received on the port, - since the last clearance." - ::= { rlPortGvrpStatisticsEntry 3 } - -rlPortGvrpStatisticsRLIn OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of Leave In Received on the port, - since the last clearance." - ::= { rlPortGvrpStatisticsEntry 4 } - -rlPortGvrpStatisticsRLE OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of Leave Empty Received on the port, - since the last clearance." - ::= { rlPortGvrpStatisticsEntry 5 } - -rlPortGvrpStatisticsRLA OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of Leave All Received on the port, - since the last clearance." - ::= { rlPortGvrpStatisticsEntry 6 } - -rlPortGvrpStatisticsSJE OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of Join Empty Sent on the port, - since the last clearance." - ::= { rlPortGvrpStatisticsEntry 7 } - -rlPortGvrpStatisticsSJIn OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of Join In Sent on the port, - since the last clearance." - ::= { rlPortGvrpStatisticsEntry 8 } - -rlPortGvrpStatisticsSEmp OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of Empty Sent on the port, - since the last clearance." - ::= { rlPortGvrpStatisticsEntry 9 } - -rlPortGvrpStatisticsSLIn OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of Leave In Sent on the port, - since the last clearance." - ::= { rlPortGvrpStatisticsEntry 10 } - -rlPortGvrpStatisticsSLE OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of Leave Empty Sent on the port, - since the last clearance." - ::= { rlPortGvrpStatisticsEntry 11 } - -rlPortGvrpStatisticsSLA OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of Leave All Sent on the port, - since the last clearance." - ::= { rlPortGvrpStatisticsEntry 12 } - -rlPortGvrpStatisticsClear OBJECT-TYPE - SYNTAX INTEGER { - activate(1), - passive(2) - } - ACCESS read-write - STATUS mandatory - DESCRIPTION - "activate - the signal/trigger to clear ALL - the rlPortGvrpStatisticsEntry's fields. - passive - specify that the rlPortGvrpStatisticsClear field is not - activate, or finshed the clearnce process. - the rlPortGvrpStatisticsClear return automatically to - passive after it was activate." - DEFVAL { passive } - ::= { rlPortGvrpStatisticsEntry 13 } - --- rlPortGvrpErrorStatisticsTable - -rlPortGvrpErrorStatisticsTable OBJECT-TYPE - SYNTAX SEQUENCE OF RlPortGvrpErrorStatisticsEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "A table of GVRP ErrorStatistics values for every bridge - port. This is indexed by dot1dBasePort." - ::= { rlGvrp 5 } - -rlPortGvrpErrorStatisticsEntry OBJECT-TYPE - SYNTAX RlPortGvrpErrorStatisticsEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "GVRP ErrorStatistics values for a bridge port." - INDEX { dot1dBasePort } - ::= { rlPortGvrpErrorStatisticsTable 1 } - -RlPortGvrpErrorStatisticsEntry ::= - SEQUENCE { - rlPortGvrpErrorStatisticsInvProt Counter, - rlPortGvrpErrorStatisticsInvAtyp Counter, - rlPortGvrpErrorStatisticsInvAval Counter, - rlPortGvrpErrorStatisticsInvPlen Counter, - rlPortGvrpErrorStatisticsInvAlen Counter, - rlPortGvrpErrorStatisticsInvEvent Counter, - rlPortGvrpErrorStatisticsClear INTEGER - } - -rlPortGvrpErrorStatisticsInvProt OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of Invalid Protocol Id encountered by - the GVRP port. (since the last clearance)" - ::= { rlPortGvrpErrorStatisticsEntry 1 } - -rlPortGvrpErrorStatisticsInvAtyp OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of Invalid Attribute Type encountered by - the GVRP port. (since the last clearance)" - ::= { rlPortGvrpErrorStatisticsEntry 2 } - -rlPortGvrpErrorStatisticsInvAval OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of Invalid Attribute Value encountered by - the GVRP port. (since the last clearance)" - ::= { rlPortGvrpErrorStatisticsEntry 3 } - -rlPortGvrpErrorStatisticsInvPlen OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of Invalid PDU Length encountered by - the GVRP port. (since the last clearance)" - ::= { rlPortGvrpErrorStatisticsEntry 4 } - -rlPortGvrpErrorStatisticsInvAlen OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of Invalid Attribute Length encountered by - the GVRP port. (since the last clearance)" - ::= { rlPortGvrpErrorStatisticsEntry 5 } - -rlPortGvrpErrorStatisticsInvEvent OBJECT-TYPE - SYNTAX Counter - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of Invalid Event encountered by - the GVRP port. (since the last clearance)" - ::= { rlPortGvrpErrorStatisticsEntry 6 } - -rlPortGvrpErrorStatisticsClear OBJECT-TYPE - SYNTAX INTEGER { - activate(1), - passive(2) - } - ACCESS read-write - STATUS mandatory - DESCRIPTION - "activate - the signal/trigger to clear ALL - the rlPortGvrpErrorStatisticsEntry's fields. - passive - specify that the rlPortGvrpErrorStatisticsClear field is not - activate, or finshed the clearnce process. - the rlPortGvrpErrorStatisticsClear return automatically to - passive after it was activate." - DEFVAL { passive } - ::= { rlPortGvrpErrorStatisticsEntry 7 } - --- rlPortGvrpApplicantStatusTable - -rlPortGvrpApplicantStatusTable OBJECT-TYPE - SYNTAX SEQUENCE OF RlPortGvrpApplicantStatusEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "A table of GVRP Applicant Status values for every bridge - port. This is indexed by dot1dBasePort." - ::= { rlGvrp 6 } - -rlPortGvrpApplicantStatusEntry OBJECT-TYPE - SYNTAX RlPortGvrpApplicantStatusEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "GVRP Applicant Status value for a bridge port." - INDEX { dot1dBasePort } - ::= { rlPortGvrpApplicantStatusTable 1 } - -RlPortGvrpApplicantStatusEntry ::= - SEQUENCE { - rlPortGvrpApplicantStatusValue INTEGER - } - -rlPortGvrpApplicantStatusValue OBJECT-TYPE - SYNTAX INTEGER { - participant(1), - nonParticipant(2) - } - ACCESS read-write - STATUS mandatory - DESCRIPTION - "participant - the Gvrp enabled port sending GARP PDUs. - nonParticipant - preventing the Gvrp enabled port from sending GARP PDUs." - DEFVAL { participant } - ::= { rlPortGvrpApplicantStatusEntry 1 } - --- rlGvrpDynamicVlanCreation was deleted --- { rlGvrp 7 } reserved - --- rlPortGvrpRegistrationModeTable - -rlPortGvrpRegistrationModeTable OBJECT-TYPE - SYNTAX SEQUENCE OF RlPortGvrpRegistrationModeEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "A table of GVRP Registration Mode values for every bridge - port. This is indexed by dot1dBasePort." - ::= { rlGvrp 8 } - -rlPortGvrpRegistrationModeEntry OBJECT-TYPE - SYNTAX RlPortGvrpRegistrationModeEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "GVRP Registration Mode value for a bridge port." - INDEX { dot1dBasePort } - ::= { rlPortGvrpRegistrationModeTable 1 } - -RlPortGvrpRegistrationModeEntry ::= - SEQUENCE { - rlPortGvrpRegistrationModeForbidden TruthValue - } - -rlPortGvrpRegistrationModeForbidden OBJECT-TYPE - SYNTAX TruthValue - ACCESS read-write - STATUS mandatory - DESCRIPTION - "true - deregisters all VLANS on the specified port and prevents any - VLAN creation or registration on that port. - false - the registration operation on this port behaves normally." - DEFVAL { false } - ::= { rlPortGvrpRegistrationModeEntry 1 } - - -rlDot3adAgg OBJECT IDENTIFIER ::= { rnd 65 } - -rlEmbWeb OBJECT IDENTIFIER ::= { rnd 66 } - -rlSwPackageVersion OBJECT IDENTIFIER ::= { rnd 67 } - -rlSwPackageVersionTable OBJECT-TYPE - SYNTAX SEQUENCE OF RlSwPackageVersionEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "The table listing the current versions of packages - that are included in the running software." - ::= { rlSwPackageVersion 1 } - -rlSwPackageVersionEntry OBJECT-TYPE - SYNTAX RlSwPackageVersionEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "The row definition for this table." - INDEX {IMPLIED rlSwPackageVersionName } - ::= { rlSwPackageVersionTable 1 } - -RlSwPackageVersionEntry ::= SEQUENCE { - rlSwPackageVersionName DisplayString, - rlSwPackageVersionVesrion DisplayString -} - -rlSwPackageVersionName OBJECT-TYPE - SYNTAX DisplayString (SIZE (1..20)) - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The Package name." - ::= { rlSwPackageVersionEntry 1 } - -rlSwPackageVersionVesrion OBJECT-TYPE - SYNTAX DisplayString (SIZE (1..20)) - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The Package version." - ::= { rlSwPackageVersionEntry 2 } - -rlBroadcom OBJECT IDENTIFIER ::= { rnd 68 } - -rlMultiSessionTerminal OBJECT IDENTIFIER ::= { rnd 69 } - -rlTerminalDebugModePassword OBJECT-TYPE - SYNTAX DisplayString (SIZE(0..20)) - ACCESS read-write - STATUS mandatory - DESCRIPTION - "When a user wants to change the terminal mode - from debug mode to ASCII he must enter this password first" - ::= { rlMultiSessionTerminal 1 } - -rlRCli OBJECT IDENTIFIER ::= { rnd 70 } - -rlRCliMibVersion OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-only - STATUS mandatory - DESCRIPTION - "MIB's version, the current version is 1." - ::= { rlRCli 1 } - -rlRCliUserPassword OBJECT-TYPE - SYNTAX OCTET STRING (SIZE(0..32)) - ACCESS read-write - STATUS mandatory - DESCRIPTION - "RCLI User mode Password" - ::= { rlRCli 2 } - -rlRCliEnablePassword OBJECT-TYPE - SYNTAX OCTET STRING (SIZE(0..32)) - ACCESS read-write - STATUS mandatory - DESCRIPTION - "RCLI Enable mode Password" - ::= { rlRCli 3 } - -rlRCliConfigPassword OBJECT-TYPE - SYNTAX OCTET STRING (SIZE(0..32)) - ACCESS read-write - STATUS mandatory - DESCRIPTION - "RCLI Config mode Password" - ::= { rlRCli 4 } - -rlRCliTimer OBJECT-TYPE - SYNTAX INTEGER (5..3600) - ACCESS read-write - STATUS mandatory - DESCRIPTION - "RCLI Timeout" - ::= { rlRCli 5 } - -rlRcliFileAction OBJECT-TYPE - SYNTAX INTEGER { - notUsedAfterReset(1), - usedAfterReset (2) - } - ACCESS read-write - STATUS mandatory - DESCRIPTION - "RCLI Configuration File action determines whether - The device configuration after reset will be set by - the configuration file content or not." - ::= { rlRCli 6 } - -rlBgp OBJECT IDENTIFIER ::= { rnd 71 } - -rlAgentsCapabilitiesGroups OBJECT IDENTIFIER ::= { rnd 72 } - -rlAggregateVlan OBJECT IDENTIFIER ::= {rnd 73} - -rlAggregateVlanMibVersion OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-only - STATUS mandatory - DESCRIPTION - "MIB's version, the current version is 1." -::= { rlAggregateVlan 1 } - -rlAggregateVlanTable OBJECT-TYPE - SYNTAX SEQUENCE OF RlAggregateVlanEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "The table creates an aggregateVlans, the IfIndex is from 10000" - ::= { rlAggregateVlan 2 } - -rlAggregateVlanEntry OBJECT-TYPE - SYNTAX RlAggregateVlanEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "The row definition for this table." - INDEX { rlAggregateVlanIndex } - ::= { rlAggregateVlanTable 1 } - -RlAggregateVlanEntry ::= SEQUENCE { - rlAggregateVlanIndex InterfaceIndex, - rlAggregateVlanName DisplayString, - rlAggregateVlanPhysAddressType INTEGER, - rlAggregateVlanStatus RowStatus -} - -rlAggregateVlanIndex OBJECT-TYPE - SYNTAX InterfaceIndex - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "This index indicate the aggrigateVlan id, the aggregate - vlan index is starting from 10000 " - ::= { rlAggregateVlanEntry 1 } - -rlAggregateVlanName OBJECT-TYPE - SYNTAX DisplayString (SIZE(0..32)) - ACCESS read-write - STATUS mandatory - DESCRIPTION - "The name of the aggregateVlan " - DEFVAL {""} - ::= { rlAggregateVlanEntry 2 } - -rlAggregateVlanPhysAddressType OBJECT-TYPE - SYNTAX INTEGER { - default(1), - reserve(2) - } - ACCESS read-write - STATUS mandatory - DESCRIPTION - " This variable indicates whether the physical address assigned to this - VLAN should be the default one or be chosen from the set of - reserved physical addresses of the device." - DEFVAL{default} - ::= { rlAggregateVlanEntry 3} - -rlAggregateVlanStatus OBJECT-TYPE - SYNTAX RowStatus - ACCESS read-write - STATUS mandatory - DESCRIPTION - "The status of the aggregateVlan table entry. It's used to delete an entry" - ::= { rlAggregateVlanEntry 4} - -rlAggregateSubVlanTable OBJECT-TYPE - SYNTAX SEQUENCE OF RlAggregateSubVlanEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "The table indicates all the allocated sub-vlans to the - aggregateVlans, an entry in the rlAggregateVlanTable must - be exist before allocating the subVlans" - ::= { rlAggregateVlan 3 } - -rlAggregateSubVlanEntry OBJECT-TYPE - SYNTAX RlAggregateSubVlanEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "The row definition for this table." - INDEX { rlAggregateVlanIndex, rlAggregateSubVlanIfIndex } - ::= { rlAggregateSubVlanTable 1 } - -RlAggregateSubVlanEntry ::= SEQUENCE { - rlAggregateSubVlanIfIndex InterfaceIndex, - rlAggregateSubVlanStatus RowStatus -} - -rlAggregateSubVlanIfIndex OBJECT-TYPE - SYNTAX InterfaceIndex - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Indicate the subVlan that allocated to the aggregate vlan" - ::= { rlAggregateSubVlanEntry 1} - -rlAggregateSubVlanStatus OBJECT-TYPE - SYNTAX RowStatus - ACCESS read-write - STATUS mandatory - DESCRIPTION - "The status of the aggregateSubVlan table entry. - It's used to delete an entry" - ::= { rlAggregateSubVlanEntry 2} - -rlAggregateVlanArpProxy OBJECT-TYPE - SYNTAX INTEGER { - enable(1), - disable(2) - } - ACCESS read-write - STATUS mandatory - DESCRIPTION - "When ARP Proxy is enabled, the router can respond to - ARP requests for nodes located on different sub-vlans, - which belong to the same Super VLAN.The router responds - with its own MAC address. - When ARP Proxy is disabled, the router responds only - to ARP requests for its own IP addresses." - DEFVAL { disable } - ::= { rlAggregateVlan 4 } - --- rlLCli OBJECT IDENTIFIER ::= { rnd 74 } - -rlGmrp OBJECT IDENTIFIER ::= { rnd 75 } - -rlGmrpSupported OBJECT-TYPE - SYNTAX TruthValue - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Is Gmrp supported in the device or not." - ::= { rlGmrp 1 } - -rlGmrpMibVersion OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-only - STATUS mandatory - DESCRIPTION - "MIB's version, the current version is 1." - ::= { rlGmrp 2 } - -rlPortGmrpTimersTable OBJECT-TYPE - SYNTAX SEQUENCE OF RlPortGmrpTimersEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "A table of Gmrp timer values for every bridge - port. This is indexed by dot1dBasePort." - ::= { rlGmrp 3 } - -rlPortGmrpTimersEntry OBJECT-TYPE - SYNTAX RlPortGmrpTimersEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "Gmrp timer values for a bridge port." - INDEX { dot1dBasePort } - ::= { rlPortGmrpTimersTable 1 } - -RlPortGmrpTimersEntry ::= - SEQUENCE { - rlPortGmrpJoinTime TimeInterval, - rlPortGmrpLeaveTime TimeInterval, - rlPortGmrpLeaveAllTime TimeInterval, - rlPortGmrpOverrideGarp EnabledStatus - } - -rlPortGmrpJoinTime OBJECT-TYPE - SYNTAX TimeInterval - ACCESS read-write - STATUS mandatory - DESCRIPTION - "The Gmrp Join time, in centiseconds." - DEFVAL { 20 } - ::= { rlPortGmrpTimersEntry 1 } - -rlPortGmrpLeaveTime OBJECT-TYPE - SYNTAX TimeInterval - ACCESS read-write - STATUS mandatory - DESCRIPTION - "The Gmrp Leave time, in centiseconds." - DEFVAL { 60 } - ::= { rlPortGmrpTimersEntry 2 } - -rlPortGmrpLeaveAllTime OBJECT-TYPE - SYNTAX TimeInterval - ACCESS read-write - STATUS mandatory - DESCRIPTION - "The Gmrp LeaveAll time, in centiseconds." - DEFVAL { 1000 } - ::= { rlPortGmrpTimersEntry 3 } - -rlPortGmrpOverrideGarp OBJECT-TYPE - SYNTAX EnabledStatus - ACCESS read-write - STATUS mandatory - DESCRIPTION - "If enabled{1}, Gmrp timer values for this port are - determined by the values in this entry. Otherwise, they - are determined by the values in dot1dPortGarpTable." - DEFVAL { disabled } - ::= { rlPortGmrpTimersEntry 4 } - -rlGmrpVlanTable OBJECT-TYPE - SYNTAX SEQUENCE OF RlGmrpVlanEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "This table is to Enable/Disable Gmrp in the vlan." - ::= { rlGmrp 4 } - -rlGmrpVlanEntry OBJECT-TYPE - SYNTAX RlGmrpVlanEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "An entry in the rlGmrpVlanTable." - INDEX { rlGmrpVlanTag } - ::= { rlGmrpVlanTable 1 } - -RlGmrpVlanEntry ::= SEQUENCE { - rlGmrpVlanTag INTEGER, - rlGmrpVlanEnable TruthValue -} - -rlGmrpVlanTag OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The tag of the VLAN for which this entry contains information." - ::= { rlGmrpVlanEntry 1 } - -rlGmrpVlanEnable OBJECT-TYPE - SYNTAX TruthValue - ACCESS read-write - STATUS mandatory - DESCRIPTION - "Enable/Disable Gmrp in the vlan." - DEFVAL { false } - ::= { rlGmrpVlanEntry 2 } - - -rlDhcpCl OBJECT IDENTIFIER ::= { rnd 76 } - --- rlDhcpCl 1,2 saved for future use - -rlDhcpClActionTable OBJECT-TYPE - SYNTAX SEQUENCE OF RlDhcpClActionEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - " The (conceptual) table mentione IP address which must be - released/renewed on the interface." - ::= { rlDhcpCl 3 } - -rlDhcpClActionEntry OBJECT-TYPE - SYNTAX RlDhcpClActionEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "An entry (conceptual row) in dhcpClActionTable." - INDEX { rlDhcpClActionIfIndex } - ::= { rlDhcpClActionTable 1 } - -RlDhcpClActionEntry ::= SEQUENCE { - rlDhcpClActionIfIndex InterfaceIndex, - rlDhcpClActionStatus RowStatus, - rlDhcpClActionHostName SnmpAdminString -} - -rlDhcpClActionIfIndex OBJECT-TYPE - SYNTAX InterfaceIndex - ACCESS read-only - STATUS mandatory - DESCRIPTION - " The interface which the action is implemented for - or NULL if it implemented for all device. " - ::= { rlDhcpClActionEntry 1 } - -rlDhcpClActionStatus OBJECT-TYPE - SYNTAX RowStatus - ACCESS read-write - STATUS mandatory - DESCRIPTION - "The status of this entry. Creating the entry renewing Dhcp - address on the interface; destroying the entry release Dhcp - address on the interface." - ::= { rlDhcpClActionEntry 2} - -rlDhcpClActionHostName OBJECT-TYPE - SYNTAX SnmpAdminString (SIZE(0..20)) - ACCESS read-write - STATUS mandatory - DESCRIPTION - " This option specifies the name of the client." - ::= { rlDhcpClActionEntry 3 } - - ------------------------------- --- DHCP Approval feature ------------------------------- - --- rlDhcpApprovalEnabled -- - -rlDhcpApprovalEnabled OBJECT-TYPE - SYNTAX TruthValue - ACCESS read-only - STATUS mandatory - DESCRIPTION "DHCP Approval feature status - enable (True) or desable (False). - Must be True only if DHCP Approval supported, device has only one - ip interface and default ip exist." - ::= { rlDhcpCl 4 } - - --- rlDhcpApprovalWaitingTable -- - -rlDhcpApprovalWaitingTable OBJECT-TYPE - SYNTAX SEQUENCE OF RlDhcpApprovalWaitingEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION "IP addresses waiting for approval." - ::= { rlDhcpCl 5 } - -rlDhcpApprovalWaitingEntry OBJECT-TYPE - SYNTAX RlDhcpApprovalWaitingEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION "An entry in rlDhcpApprovalWaitingTable." - INDEX { rlDhcpApprovalWaitingIfIndex } - ::= { rlDhcpApprovalWaitingTable 1 } - -RlDhcpApprovalWaitingEntry ::= SEQUENCE { - rlDhcpApprovalWaitingIfIndex InterfaceIndex, - rlDhcpApprovalWaitingAddress IpAddress, - rlDhcpApprovalWaitingMask IpAddress, - rlDhcpApprovalWaitingGateway IpAddress -} - -rlDhcpApprovalWaitingIfIndex OBJECT-TYPE - SYNTAX InterfaceIndex - ACCESS read-only - STATUS mandatory - DESCRIPTION "IP interface ifIndex." - ::= { rlDhcpApprovalWaitingEntry 1 } - -rlDhcpApprovalWaitingAddress OBJECT-TYPE - SYNTAX IpAddress - ACCESS read-only - STATUS mandatory - DESCRIPTION "IP Address waiting for approval." - ::= { rlDhcpApprovalWaitingEntry 2} - -rlDhcpApprovalWaitingMask OBJECT-TYPE - SYNTAX IpAddress - ACCESS read-only - STATUS mandatory - DESCRIPTION "Mask waiting for approval." - ::= { rlDhcpApprovalWaitingEntry 3} - -rlDhcpApprovalWaitingGateway OBJECT-TYPE - SYNTAX IpAddress - ACCESS read-only - STATUS mandatory - DESCRIPTION "Default gateway of received address." - ::= { rlDhcpApprovalWaitingEntry 4} - - - --- rlDhcpApprovalActionTable -- - -rlDhcpApprovalActionTable OBJECT-TYPE - SYNTAX SEQUENCE OF RlDhcpApprovalActionEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION "Action for waiting ip address (approve/decline)." - ::= { rlDhcpCl 6 } - -rlDhcpApprovalActionEntry OBJECT-TYPE - SYNTAX RlDhcpApprovalActionEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION "An entry in rlDhcpApprovalActionTable." - INDEX {rlDhcpApprovalActionIfIndex, - rlDhcpApprovalActionAddress, - rlDhcpApprovalActionMask } - ::= { rlDhcpApprovalActionTable 1 } - -RlDhcpApprovalActionEntry ::= SEQUENCE { - rlDhcpApprovalActionIfIndex InterfaceIndex, - rlDhcpApprovalActionAddress IpAddress, - rlDhcpApprovalActionMask IpAddress, - rlDhcpApprovalActionApprove TruthValue -} - -rlDhcpApprovalActionIfIndex OBJECT-TYPE - SYNTAX InterfaceIndex - ACCESS read-only - STATUS mandatory - DESCRIPTION "IP interface ifIndex." - ::= { rlDhcpApprovalActionEntry 1 } - -rlDhcpApprovalActionAddress OBJECT-TYPE - SYNTAX IpAddress - ACCESS read-only - STATUS mandatory - DESCRIPTION "IP Address." - ::= { rlDhcpApprovalActionEntry 2 } - -rlDhcpApprovalActionMask OBJECT-TYPE - SYNTAX IpAddress - ACCESS read-only - STATUS mandatory - DESCRIPTION "IP Address mask." - ::= { rlDhcpApprovalActionEntry 3 } - -rlDhcpApprovalActionApprove OBJECT-TYPE - SYNTAX TruthValue - ACCESS read-write - STATUS mandatory - DESCRIPTION "Approve or decline ip address." - ::= { rlDhcpApprovalActionEntry 4} - - --- ======================================================= --- DHCP Renew --- ======================================================= - -rlDhcpClCommandTable OBJECT-TYPE - SYNTAX SEQUENCE OF RlDhcpClCommandEntry - ACCESS read-only - STATUS mandatory - DESCRIPTION "Action MIB for DHCP Renew command." - ::= { rlDhcpCl 7 } - -rlDhcpClCommandEntry OBJECT-TYPE - SYNTAX RlDhcpClCommandEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION "The row definition for this table." - INDEX { ifIndex } -::= { rlDhcpClCommandTable 1 } - -RlDhcpClCommandEntry::= SEQUENCE { - rlDhcpClCommandAction INTEGER -} - -rlDhcpClCommandAction OBJECT-TYPE - SYNTAX INTEGER { - none(0), - renew(1) - } - ACCESS read-write - STATUS mandatory - DESCRIPTION "Action to apply." - ::= { rlDhcpClCommandEntry 2 } - - ------------------------------- - - -rlStormCtrl OBJECT IDENTIFIER ::= { rnd 77 } - -rlStormCtrlSupport OBJECT-TYPE - SYNTAX TruthValue - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Identify if the strom control protection is supported" - ::= { rlStormCtrl 1 } - -rlStormCtrlMibVersion OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-only - STATUS mandatory - DESCRIPTION - "MIB's version, the current version is 3." - ::= { rlStormCtrl 2 } - -rlStormCtrlRateUnitTypeSupport OBJECT-TYPE --- SYNTAX BITS { --- packetsPerSecond(0), --- bytesPerSecond(1), --- framesPerBuffer(2), --- percentages(3), --- kiloBytesPerSecond(4), --- kiloBitsPerSecond(5) --- } - SYNTAX OCTET STRING (SIZE(1)) - ACCESS read-only - STATUS mandatory - DESCRIPTION - "the supported rate unit type for the storm rate control" - ::= { rlStormCtrl 3 } - -rlStormCtrlTypeSupport OBJECT-TYPE --- SYNTAX BITS { --- unknownUnicast(0), --- unknownMulticast(1), --- broadcast(2), --- multicast(3), --- } - SYNTAX OCTET STRING (SIZE(1)) - ACCESS read-only - STATUS mandatory - DESCRIPTION - "the supported frame type for the storm control protection" - ::= { rlStormCtrl 4 } - -rlStormCtrlRateSupportPerType OBJECT-TYPE --- SYNTAX BITS { --- unknownUnicast(0), --- unknownMulticast(1), --- broadcast(2), --- multicast(3), --- } - SYNTAX OCTET STRING (SIZE(1)) - ACCESS read-only - STATUS mandatory - DESCRIPTION - "identify if rate control is supported for each frame type" - ::= { rlStormCtrl 5 } - -rlStormCtrlEnbaleDependencyBetweenTypes OBJECT-TYPE --- SYNTAX BITS { --- unknownUnicast(0), --- unknownMulticast(1), --- broadcast(2), --- multicast(3), --- } - SYNTAX OCTET STRING (SIZE(1)) - ACCESS read-only - STATUS mandatory - DESCRIPTION - "indicate enable limitation of dependency between frame types, - such as enabling of multicast should be with the enabling of - broadcast type (bcm 5632)" - ::= { rlStormCtrl 6 } - -rlStormCtrlRateDependencyBetweenTypes OBJECT-TYPE --- SYNTAX BITS { --- unknownUnicast(0), --- unknownMulticast(1), --- broadcast(2), --- multicast(3), --- } - SYNTAX OCTET STRING (SIZE(1)) - ACCESS read-only - STATUS mandatory - DESCRIPTION - "indicate limitation of dependency between frame types for - rate assignment, for example: assigning of rate limit for unicast - frame must assigning the same rate for multicast and bradcast - frame (bcm 5615), in case the device support enbale per each frame - type but with the same rate limitation." - ::= { rlStormCtrl 7 } - --- --- rlStormCtrlTable --- -rlStormCtrlTable OBJECT-TYPE - SYNTAX SEQUENCE OF RlStormCtrlEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "The table contains the storm control protection per port" - ::= { rlStormCtrl 8 } - -rlStormCtrlEntry OBJECT-TYPE - SYNTAX RlStormCtrlEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "storm control protection, defined per port,frame type and rate" - INDEX { dot1dBasePort } - ::= { rlStormCtrlTable 1 } - -RlStormCtrlEntry ::= SEQUENCE { - rlStormCtrlRateType RlStormCtrlRateUnit, - rlStormCtrlUnknownUnicastEnable TruthValue, - rlStormCtrlUnknownUnicastRate Unsigned-32, - rlStormCtrlUnknownMulticastEnable TruthValue, - rlStormCtrlUnknownMulticastRate Unsigned-32, - rlStormCtrlBroadcastEnable TruthValue, - rlStormCtrlBroadcastRate Unsigned-32, - rlStormCtrlMulticastEnable TruthValue, - rlStormCtrlMulticastRate Unsigned-32, - rlStormCtrlSetDefaultRateType TruthValue, - rlStormCtrlSetDefaultUnknownUnicastEnable TruthValue, - rlStormCtrlSetDefaultUnknownUnicastRate TruthValue, - rlStormCtrlSetDefaultUnknownMulticastEnable TruthValue, - rlStormCtrlSetDefaultUnknownMulticastRate TruthValue, - rlStormCtrlSetDefaultBroadcastEnable TruthValue, - rlStormCtrlSetDefaultBroadcastRate TruthValue, - rlStormCtrlSetDefaultMulticastEnable TruthValue, - rlStormCtrlSetDefaultMulticastRate TruthValue -} - -rlStormCtrlRateType OBJECT-TYPE - SYNTAX RlStormCtrlRateUnit - ACCESS read-write - STATUS mandatory - DESCRIPTION - "indicate the rate unit type" - ::= { rlStormCtrlEntry 1 } - -rlStormCtrlUnknownUnicastEnable OBJECT-TYPE - SYNTAX TruthValue - ACCESS read-write - STATUS mandatory - DESCRIPTION - "enable or disable the storm control for unknown unicast frames" - DEFVAL { false } - ::= { rlStormCtrlEntry 2 } - -rlStormCtrlUnknownUnicastRate OBJECT-TYPE - SYNTAX Unsigned-32 - ACCESS read-write - STATUS mandatory - DESCRIPTION - "set the storm control rate limit for the unknown unicast frames, - 0 indicate blocking of frames from this type." - DEFVAL { 0 } - ::= { rlStormCtrlEntry 3 } - -rlStormCtrlUnknownMulticastEnable OBJECT-TYPE - SYNTAX TruthValue - ACCESS read-write - STATUS mandatory - DESCRIPTION - "enable or disable the storm control for unknown multicast frames" - DEFVAL { false } - ::= { rlStormCtrlEntry 4 } - -rlStormCtrlUnknownMulticastRate OBJECT-TYPE - SYNTAX Unsigned-32 - ACCESS read-write - STATUS mandatory - DESCRIPTION - "set the storm control rate limit for the unknown multicast frames, - 0 indicate blocking of frames from this type." - DEFVAL { 0 } - ::= { rlStormCtrlEntry 5 } - -rlStormCtrlBroadcastEnable OBJECT-TYPE - SYNTAX TruthValue - ACCESS read-write - STATUS mandatory - DESCRIPTION - "enable or disable the storm control for Broadcast frames" - DEFVAL { false } - ::= { rlStormCtrlEntry 6 } - -rlStormCtrlBroadcastRate OBJECT-TYPE - SYNTAX Unsigned-32 - ACCESS read-write - STATUS mandatory - DESCRIPTION - "set the storm control rate limit for the Broadcast frames, - 0 indicate blocking of frames from this type." - DEFVAL { 0 } - ::= { rlStormCtrlEntry 7 } - -rlStormCtrlMulticastEnable OBJECT-TYPE - SYNTAX TruthValue - ACCESS read-write - STATUS mandatory - DESCRIPTION - "enable or disable the storm control for multicast frames" - DEFVAL { false } - ::= { rlStormCtrlEntry 8 } - -rlStormCtrlMulticastRate OBJECT-TYPE - SYNTAX Unsigned-32 - ACCESS read-write - STATUS mandatory - DESCRIPTION - "set the storm control rate limit for the multicast frames, - 0 indicate blocking of frames from this type." - DEFVAL { 0 } - ::= { rlStormCtrlEntry 9 } - -rlStormCtrlSetDefaultRateType OBJECT-TYPE - SYNTAX TruthValue - ACCESS read-write - STATUS mandatory - DESCRIPTION - "indicate if return the rate unit type to its default." - DEFVAL { false } - ::= { rlStormCtrlEntry 10 } - -rlStormCtrlSetDefaultUnknownUnicastEnable OBJECT-TYPE - SYNTAX TruthValue - ACCESS read-write - STATUS mandatory - DESCRIPTION - "indicate if return the storm control enable for unknown unicast frames - to its default." - DEFVAL { false } - ::= { rlStormCtrlEntry 11 } - -rlStormCtrlSetDefaultUnknownUnicastRate OBJECT-TYPE - SYNTAX TruthValue - ACCESS read-write - STATUS mandatory - DESCRIPTION - "indicate if return the storm control rate limit for the unknown unicast frames - to its default." - DEFVAL { false } - ::= { rlStormCtrlEntry 12 } - -rlStormCtrlSetDefaultUnknownMulticastEnable OBJECT-TYPE - SYNTAX TruthValue - ACCESS read-write - STATUS mandatory - DESCRIPTION - "indicate if return the storm control enable for unknown multicast frames - to its default." - DEFVAL { false } - ::= { rlStormCtrlEntry 13 } - -rlStormCtrlSetDefaultUnknownMulticastRate OBJECT-TYPE - SYNTAX TruthValue - ACCESS read-write - STATUS mandatory - DESCRIPTION - "indicate if return the storm control rate limit for the unknown multicast frames - to its default." - DEFVAL { false } - ::= { rlStormCtrlEntry 14 } - -rlStormCtrlSetDefaultBroadcastEnable OBJECT-TYPE - SYNTAX TruthValue - ACCESS read-write - STATUS mandatory - DESCRIPTION - "indicate if return the storm control enable for Broadcast frames - to its default." - DEFVAL { false } - ::= { rlStormCtrlEntry 15 } - -rlStormCtrlSetDefaultBroadcastRate OBJECT-TYPE - SYNTAX TruthValue - ACCESS read-write - STATUS mandatory - DESCRIPTION - "indicate if return the storm control rate limit for the Broadcast frames - to its default." - DEFVAL { false } - ::= { rlStormCtrlEntry 16 } - -rlStormCtrlSetDefaultMulticastEnable OBJECT-TYPE - SYNTAX TruthValue - ACCESS read-write - STATUS mandatory - DESCRIPTION - "indicate if return the storm control for multicast frames - to its default." - DEFVAL { false } - ::= { rlStormCtrlEntry 17 } - -rlStormCtrlSetDefaultMulticastRate OBJECT-TYPE - SYNTAX TruthValue - ACCESS read-write - STATUS mandatory - DESCRIPTION - "indicate if return the storm control rate limit for the multicast frames - to its default." - DEFVAL { false } - ::= { rlStormCtrlEntry 18 } - --- --- rlStormCtrlGroupTable --- -rlStormCtrlGroupTable OBJECT-TYPE - SYNTAX SEQUENCE OF RlStormCtrlGroupEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "The table contains per port for each supported frame type - to which group it belongs." - ::= { rlStormCtrl 9 } - -rlStormCtrlGroupEntry OBJECT-TYPE - SYNTAX RlStormCtrlGroupEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "group id for each supported frame type defined per port." - INDEX { dot1dBasePort } - ::= { rlStormCtrlGroupTable 1 } - -RlStormCtrlGroupEntry ::= SEQUENCE { - rlStormCtrlGroupUnknownUnicastId INTEGER, - rlStormCtrlGroupUnknownMulticastId INTEGER, - rlStormCtrlGroupBroadcastId INTEGER, - rlStormCtrlGroupMulticastId INTEGER -} - -rlStormCtrlGroupUnknownUnicastId OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Indicates the id of the group for unknown unicast frame type that - the port belongs to, - 0 indicates that unknown unicast frame type is not supported." - ::= { rlStormCtrlGroupEntry 1 } - -rlStormCtrlGroupUnknownMulticastId OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Indicates the id of the group for unknown multicast frame type that - the port belongs to, - 0 indicates that unknown multicast frame type is not supported." - ::= { rlStormCtrlGroupEntry 2 } - -rlStormCtrlGroupBroadcastId OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Indicates the id of the group for broadcast frame type that - the port belongs to, - 0 indicates that broadcast frame type is not supported." - ::= { rlStormCtrlGroupEntry 3 } - -rlStormCtrlGroupMulticastId OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Indicates the id of the group for multicast frame type that - the port belongs to, - 0 indicates that multicast frame type is not supported." - ::= { rlStormCtrlGroupEntry 4 } - -rlSsh OBJECT IDENTIFIER ::= { rnd 78 } - -rlAAA OBJECT IDENTIFIER ::= { rnd 79 } - -rlRadius OBJECT IDENTIFIER ::= { rnd 80 } - --- see rlAAA.mib - -rlTraceRoute OBJECT IDENTIFIER ::= { rnd 81 } - -rlTraceRouteMibVersion OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-only - STATUS mandatory - DESCRIPTION - "MIB's version, the current version is 1." - ::= { rlTraceRoute 1 } - -rlSyslog OBJECT IDENTIFIER ::= { rnd 82 } - -rlEnv OBJECT IDENTIFIER ::= { rnd 83 } --- rlPhysicalDescription OBJECT IDENTIFIER ::= { rlEnv 1 } --- entitySensorMIB OBJECT IDENTIFIER ::= { rlEnv 2 } - -rlSmon OBJECT IDENTIFIER ::= { rnd 84 } - -rlPortCopyMibVersion OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-only - STATUS mandatory - DESCRIPTION - "MIB's version, the current version is 1." - ::= { rlSmon 1 } - -rlPortCopySupport OBJECT-TYPE - SYNTAX INTEGER { - supported(1), - notSupported(2) - } - ACCESS read-only - STATUS mandatory - DESCRIPTION - "supported - The standard portCopy is supported. - notSupported - the standard portCopy is not supported. - only basic portCopy operation is supported. " - ::= { rlSmon 2 } - -rlPortCopyVlanTaggingTable OBJECT-TYPE - SYNTAX SEQUENCE OF RlPortCopyVlanTaggingEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "A supplementing table for portCopyTable. - For every portCopyDest a vlan-tagging option is available." - ::= { rlSmon 3 } - -rlPortCopyVlanTaggingEntry OBJECT-TYPE - SYNTAX RlPortCopyVlanTaggingEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "Each entry specify how mirrored packets will transmit from - the portCopyDest: Tagged or unTagged. - The values in this entry will be valid only when the - dot1dBasePort will be configured as a portCopyDest - in the portCopyTable." - INDEX { dot1dBasePort } - ::= { rlPortCopyVlanTaggingTable 1 } - -RlPortCopyVlanTaggingEntry ::= - SEQUENCE { - rlPortCopyVlanTagging TruthValue - } - -rlPortCopyVlanTagging OBJECT-TYPE - SYNTAX TruthValue - ACCESS read-write - STATUS mandatory - DESCRIPTION - "TRUE - Mirrored packets will transmit from portCopyDest - Tagged - FALSE - Mirrored packets will transmit from portCopyDest - unTagged" - DEFVAL { true } - ::= { rlPortCopyVlanTaggingEntry 1 } - -rlSocket OBJECT IDENTIFIER ::= { rnd 85 } - -rlSocketMibVersion OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-only - STATUS mandatory - DESCRIPTION - "MIB's version, the current version is 1." - ::= { rlSocket 1 } - -rlSocketTable OBJECT-TYPE - SYNTAX - SEQUENCE OF RlSocketEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "The (conceptual) table listing the sockets which are currently - open in the system." - ::= { rlSocket 2 } - -rlSocketEntry OBJECT-TYPE - SYNTAX RlSocketEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "An entry (conceptual row) in the SocketTable." - INDEX { rlSocketId } - ::= { rlSocketTable 1 } - -RlSocketEntry ::= SEQUENCE { - rlSocketId INTEGER, - rlSocketType INTEGER, - rlSocketState INTEGER, - rlSocketBlockMode INTEGER, - rlSocketUpTime TimeTicks -} - -rlSocketId OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The value of the id of the socket. " - ::= { rlSocketEntry 1 } - -rlSocketType OBJECT-TYPE - SYNTAX INTEGER { - stream(1), - dgram(2), - raw(3) - } - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Specifies the type of the socket. " - ::= { rlSocketEntry 2 } - -rlSocketState OBJECT-TYPE - SYNTAX INTEGER { - connected(1), - notConnected(2), - recvClosed(3), - sendClosed(4), - closed(5) - } - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Specifies the state in which the socket is in. " - ::= { rlSocketEntry 3 } - -rlSocketBlockMode OBJECT-TYPE - SYNTAX INTEGER { - blocking(1), - nonBlocking(2) - } - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Specifies the blocking mode of the socket. " - ::= { rlSocketEntry 4 } - -rlSocketUpTime OBJECT-TYPE - SYNTAX TimeTicks - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The time elapsed since this socket was created." - ::= { rlSocketEntry 5 } - -rlDigitalKeyManage OBJECT IDENTIFIER ::= { rnd 86 } - -rlMD5KeyChainTable OBJECT-TYPE - SYNTAX SEQUENCE OF RlMD5KeyChainEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "Key-chains and key ID's" - ::= { rlDigitalKeyManage 1 } - -rlMD5KeyChainEntry OBJECT-TYPE - SYNTAX RlMD5KeyChainEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "Key-chain with key ID that belongs to this chain" - INDEX {rlMD5KeyChainName, rlMD5KeyChainKeyId} - ::= { rlMD5KeyChainTable 1 } - -RlMD5KeyChainEntry ::= SEQUENCE { - rlMD5KeyChainName DisplayString, - rlMD5KeyChainKeyId INTEGER, - rlMD5KeyChainKeyRowStatus RowStatus -} - -rlMD5KeyChainName OBJECT-TYPE - SYNTAX DisplayString - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Name of the key-chain to which belongs - the secret authentication key" - ::= { rlMD5KeyChainEntry 1 } - -rlMD5KeyChainKeyId OBJECT-TYPE - SYNTAX INTEGER (1..255) - ACCESS read-only - STATUS mandatory - DESCRIPTION - "A 8-bit identifier for the secret authentication key. - This identifier is the same as key ID used in rlMD5KeyTable." - ::= { rlMD5KeyChainEntry 2 } - -rlMD5KeyChainKeyRowStatus OBJECT-TYPE - SYNTAX RowStatus - ACCESS read-write - STATUS mandatory - DESCRIPTION - "It is used to insert, update or delete an entry" - ::= { rlMD5KeyChainEntry 3 } - - -rlMD5KeyTable OBJECT-TYPE - SYNTAX SEQUENCE OF RlMD5KeyEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "Secret authentication keys - used by MD5 Authentication Algorithm" - ::= { rlDigitalKeyManage 2 } - -rlMD5KeyEntry OBJECT-TYPE - SYNTAX RlMD5KeyEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "Secret authentication key with all related parameters" - INDEX {rlMD5KeyId} - ::= { rlMD5KeyTable 1 } - -RlMD5KeyEntry ::= SEQUENCE { - rlMD5KeyId INTEGER, - rlMD5Key DisplayString, - rlMD5KeyStartAccept DateAndTime, - rlMD5KeyStartGenerate DateAndTime, - rlMD5KeyStopGenerate DateAndTime, - rlMD5KeyStopAccept DateAndTime, - rlMD5KeyRowStatus RowStatus -} - -rlMD5KeyId OBJECT-TYPE - SYNTAX INTEGER (1..255) - ACCESS read-only - STATUS mandatory - DESCRIPTION - "A 8-bit identifier for the secret authentication key" - ::= { rlMD5KeyEntry 1 } - -rlMD5Key OBJECT-TYPE - SYNTAX DisplayString (SIZE (1..16)) - ACCESS read-write - STATUS mandatory - DESCRIPTION - "The 128-bit secret authentication key. - The key can get value only once and cannot be modified. - When read, rlMD5KeyChainKey always returns an - Octet String of length zero." - ::= { rlMD5KeyEntry 2 } - -rlMD5KeyStartAccept OBJECT-TYPE - SYNTAX DateAndTime - ACCESS read-write - STATUS mandatory - DESCRIPTION - "The time that the router will start accepting packets - that have been created with the given key" - DEFVAL { '00000000'H } - ::= { rlMD5KeyEntry 3 } - -rlMD5KeyStartGenerate OBJECT-TYPE - SYNTAX DateAndTime - ACCESS read-write - STATUS mandatory - DESCRIPTION - "The time that the router will start using the key - for packet generation" - DEFVAL { '00000000'H } - ::= { rlMD5KeyEntry 4 } - -rlMD5KeyStopGenerate OBJECT-TYPE - SYNTAX DateAndTime - ACCESS read-write - STATUS mandatory - DESCRIPTION - "The time that the router will stop using the key - for packet generation" - DEFVAL { 'FFFFFFFF'H } - ::= { rlMD5KeyEntry 5 } - -rlMD5KeyStopAccept OBJECT-TYPE - SYNTAX DateAndTime - ACCESS read-write - STATUS mandatory - DESCRIPTION - "The time that the router will stop accepting packets - that have been created with the given key" - DEFVAL { 'FFFFFFFF'H } - ::= { rlMD5KeyEntry 6 } - -rlMD5KeyRowStatus OBJECT-TYPE - SYNTAX RowStatus - ACCESS read-write - STATUS mandatory - DESCRIPTION - "It is used to insert, update or delete an entry" - ::= { rlMD5KeyEntry 7 } - -rlCopy OBJECT IDENTIFIER ::= { rnd 87 } - -rlQosCliMib OBJECT IDENTIFIER ::= { rnd 88 } - -rlMngInf OBJECT IDENTIFIER ::= { rnd 89 } - -rlPhy OBJECT IDENTIFIER ::= { rnd 90 } - -rlJumboFrames OBJECT IDENTIFIER ::= { rnd 91 } - -rlJumboFramesCurrentStatus OBJECT-TYPE - SYNTAX INTEGER { - enable(1), - disable(2) - } - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Show the current Jumbo Frames status" - ::= { rlJumboFrames 1 } - -rlJumboFramesStatusAfterReset OBJECT-TYPE - SYNTAX INTEGER { - enable(1), - disable(2) - } - ACCESS read-write - STATUS mandatory - DESCRIPTION - "Set the Jumbo Frames status after reset" - ::= { rlJumboFrames 2 } - -rlTimeSynchronization OBJECT IDENTIFIER ::= { rnd 92 } - -rlDnsCl OBJECT IDENTIFIER ::= { rnd 93 } - -rlCDB OBJECT IDENTIFIER ::= { rnd 94 } - -rlStartupCDBChanged OBJECT-TYPE - SYNTAX TruthValue - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Indicates whether the startup CDB has changed between the router's - last two reboots" - ::= {rlCDB 1 } - -rlManualReboot OBJECT-TYPE - SYNTAX TruthValue - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Indicates whether the device was shutdown orderly before reboot or - not (i.e. power failure)" - ::= {rlCDB 2 } - -rldot1x OBJECT IDENTIFIER ::= { rnd 95 } - -rldot1xMibVersion OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-only - STATUS mandatory - DESCRIPTION - "MIB's version, the current version is 1." - ::= { rldot1x 1 } - -rldot1xExtAuthSessionStatsTable OBJECT-TYPE - SYNTAX SEQUENCE OF Rldot1xExtAuthSessionStatsEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "A table that contains the session statistics objects - for the Authenticator PAE associated with each Port. - An entry appears in this table for each port that may - authenticate access to itself." - ::= { rldot1x 2 } - -rldot1xExtAuthSessionStatsEntry OBJECT-TYPE - SYNTAX Rldot1xExtAuthSessionStatsEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "The session statistics information for an Authenticator - PAE. This shows the current values being collected for - each session that is still in progress, or the final - values for the last valid session on each port where - there is no session currently active." - AUGMENTS { dot1xAuthSessionStatsEntry } - ::= { rldot1xExtAuthSessionStatsTable 1 } - -Rldot1xExtAuthSessionStatsEntry ::= - SEQUENCE { - rlDot1xAuthSessionAuthenticMethod - INTEGER - } - -rlDot1xAuthSessionAuthenticMethod OBJECT-TYPE - SYNTAX INTEGER { - remoteAuthServer(1), - localAuthServer(2), - none(3) - } - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The authentication method used to establish the - session." - ::= { rldot1xExtAuthSessionStatsEntry 1 } - -rldot1xGuestVlanSupported OBJECT-TYPE - SYNTAX TruthValue - ACCESS read-only - STATUS mandatory - DESCRIPTION - "indicate if guest vlan is supported." - ::= { rldot1x 3 } - -rldot1xGuestVlanVID OBJECT-TYPE - SYNTAX VlanIndex - ACCESS read-write - STATUS mandatory - DESCRIPTION - "specify the guest vlan tag , 0 for non exiting." - ::= { rldot1x 4 } - -rldot1xGuestVlanPorts OBJECT-TYPE - SYNTAX PortList - ACCESS read-write - STATUS mandatory - DESCRIPTION - "the ports that can be members in the guest vlan" - ::= { rldot1x 5 } - -rldot1xUnAuthenticatedVlanSupported OBJECT-TYPE - SYNTAX TruthValue - ACCESS read-only - STATUS mandatory - DESCRIPTION - "indicate if unauthenticated Vlan is supported." - ::= { rldot1x 6 } - -rldot1xUnAuthenticatedVlanTable OBJECT-TYPE - SYNTAX SEQUENCE OF Rldot1xUnAuthenticatedVlanEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "port belong to vlan in all port authenticated state except force unauthenticated table" - ::= { rldot1x 7 } - -rldot1xUnAuthenticatedVlanEntry OBJECT-TYPE - SYNTAX Rldot1xUnAuthenticatedVlanEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - " port belong to vlan in all port authenticated state except force unauthenticated entry" - INDEX { dot1qFdbId } - ::= { rldot1xUnAuthenticatedVlanTable 1 } - -Rldot1xUnAuthenticatedVlanEntry ::= SEQUENCE { - rldot1xUnAuthenticatedVlanStatus RowStatus - } - -rldot1xUnAuthenticatedVlanStatus OBJECT-TYPE - SYNTAX RowStatus - ACCESS read-write - STATUS mandatory - DESCRIPTION - "The row status variable, used according to - row installation and removal conventions." - ::= { rldot1xUnAuthenticatedVlanEntry 1 } - -rldot1xUserBasedVlanSupported OBJECT-TYPE - SYNTAX TruthValue - ACCESS read-only - STATUS mandatory - DESCRIPTION - "indicate if user based Vlan is supported." - ::= { rldot1x 8 } - -rldot1xUserBasedVlanPorts OBJECT-TYPE - SYNTAX PortList - ACCESS read-write - STATUS mandatory - DESCRIPTION - "the ports that can be members in the user based vlan" - ::= { rldot1x 9 } - -rldot1xAuthenticationPortTable OBJECT-TYPE - SYNTAX SEQUENCE OF Rldot1xAuthenticationPortEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "A table of system level information for each port - supported by the Port Access Entity. An entry appears - in this table for each port of this system." - ::= { rldot1x 10 } - -rldot1xAuthenticationPortEntry OBJECT-TYPE - SYNTAX Rldot1xAuthenticationPortEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "The Port number and mac method" - INDEX { dot1xPaePortNumber } - ::= { rldot1xAuthenticationPortTable 1 } - -Rldot1xAuthenticationPortEntry::= - SEQUENCE { - rldot1xAuthenticationPortMethod - INTEGER - } - -rldot1xAuthenticationPortMethod OBJECT-TYPE - SYNTAX INTEGER { - eapolOnly(1), - macAndEapol(2), - macOnly(3) - } - ACCESS read-write - STATUS mandatory - DESCRIPTION - "The value of the mac based authenication." - DEFVAL { eapolOnly } - ::= { rldot1xAuthenticationPortEntry 1 } - - -------------------------------------------------------------- - -- The Authenticator Statistics Table - -------------------------------------------------------------- - - rldot1xAuthMultiStatsTable OBJECT-TYPE - SYNTAX SEQUENCE OF Rldot1xAuthMultiStatsEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "A table that contains the statistics objects for the - Authenticator PAE associated with each Port and MAC for - multisession 802.1x mode of operation. - An entry appears in this table for each port and MAC that have an - authentication session currently running under way for them." - REFERENCE - "9.4.2 Authenticator Statistics" - ::= { rldot1x 11 } - - rldot1xAuthMultiStatsEntry OBJECT-TYPE - SYNTAX Rldot1xAuthMultiStatsEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "The statistics information for an Authenticator PAE." - INDEX { rldot1xAuthMultiStatsPortNumber, rldot1xAuthMultiStatsSourceMac } - ::= { rldot1xAuthMultiStatsTable 1 } - - Rldot1xAuthMultiStatsEntry ::= - SEQUENCE { - rldot1xAuthMultiStatsPortNumber - INTEGER, - rldot1xAuthMultiStatsSourceMac - MacAddress, - rldot1xAuthMultiEapolFramesRx - Counter32, - rldot1xAuthMultiEapolFramesTx - Counter32, - rldot1xAuthMultiEapolStartFramesRx - Counter32, - rldot1xAuthMultiEapolLogoffFramesRx - Counter32, - rldot1xAuthMultiEapolRespIdFramesRx - Counter32, - rldot1xAuthMultiEapolRespFramesRx - Counter32, - rldot1xAuthMultiEapolReqIdFramesTx - Counter32, - rldot1xAuthMultiEapolReqFramesTx - Counter32, - rldot1xAuthMultiInvalidEapolFramesRx - Counter32, - rldot1xAuthMultiEapLengthErrorFramesRx - Counter32 - } - - rldot1xAuthMultiStatsPortNumber OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Port Number." - ::= { rldot1xAuthMultiStatsEntry 1 } - - rldot1xAuthMultiStatsSourceMac OBJECT-TYPE - SYNTAX MacAddress - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Mac of the authentication session." - ::= { rldot1xAuthMultiStatsEntry 2 } - - rldot1xAuthMultiEapolFramesRx OBJECT-TYPE - SYNTAX Counter32 - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of valid EAPOL frames of any type - that have been received by this Authenticator." - REFERENCE - "9.4.2, EAPOL frames received" - ::= { rldot1xAuthMultiStatsEntry 3 } - - rldot1xAuthMultiEapolFramesTx OBJECT-TYPE - SYNTAX Counter32 - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of EAPOL frames of any type - that have been transmitted by this Authenticator." - REFERENCE - "9.4.2, EAPOL frames transmitted" - ::= { rldot1xAuthMultiStatsEntry 4 } - - rldot1xAuthMultiEapolStartFramesRx OBJECT-TYPE - SYNTAX Counter32 - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of EAPOL Start frames that have - been received by this Authenticator." - REFERENCE - "9.4.2, EAPOL Start frames received" - ::= { rldot1xAuthMultiStatsEntry 5 } - - rldot1xAuthMultiEapolLogoffFramesRx OBJECT-TYPE - SYNTAX Counter32 - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of EAPOL Logoff frames that have - been received by this Authenticator." - REFERENCE - "9.4.2, EAPOL Logoff frames received" - ::= { rldot1xAuthMultiStatsEntry 6 } - - rldot1xAuthMultiEapolRespIdFramesRx OBJECT-TYPE - SYNTAX Counter32 - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of EAP Resp/Id frames that have - been received by this Authenticator." - REFERENCE - "9.4.2, EAPOL Resp/Id frames received" - ::= { rldot1xAuthMultiStatsEntry 7 } - - rldot1xAuthMultiEapolRespFramesRx OBJECT-TYPE - SYNTAX Counter32 - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of valid EAP Response frames - (other than Resp/Id frames) that have been - received by this Authenticator." - REFERENCE - "9.4.2, EAPOL Response frames received" - ::= { rldot1xAuthMultiStatsEntry 8 } - - rldot1xAuthMultiEapolReqIdFramesTx OBJECT-TYPE - SYNTAX Counter32 - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of EAP Req/Id frames that have been - transmitted by this Authenticator." - REFERENCE - "9.4.2, EAPOL Req/Id frames transmitted" - ::= { rldot1xAuthMultiStatsEntry 9 } - - rldot1xAuthMultiEapolReqFramesTx OBJECT-TYPE - SYNTAX Counter32 - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of EAP Request frames - (other than Rq/Id frames) that have been - transmitted by this Authenticator." - REFERENCE - "9.4.2, EAPOL Request frames transmitted" - ::= { rldot1xAuthMultiStatsEntry 10 } - - rldot1xAuthMultiInvalidEapolFramesRx OBJECT-TYPE - SYNTAX Counter32 - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of EAPOL frames that have been - received by this Authenticator in which the - frame type is not recognized." - REFERENCE - "9.4.2, Invalid EAPOL frames received" - ::= { rldot1xAuthMultiStatsEntry 11 } - - rldot1xAuthMultiEapLengthErrorFramesRx OBJECT-TYPE - SYNTAX Counter32 - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of EAPOL frames that have been received - by this Authenticator in which the Packet Body - Length field is invalid." - REFERENCE - "9.4.2, EAP length error frames received" - ::= { rldot1xAuthMultiStatsEntry 12 } - - -------------------------------------------------------------- - -- The Authenticator Diagnostics Table - -------------------------------------------------------------- - - rldot1xAuthMultiDiagTable OBJECT-TYPE - SYNTAX SEQUENCE OF Rldot1xAuthMultiDiagEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "A table that contains the diagnostics objects for the - Authenticator PAE associated with each Port and MAC. - An entry appears in this table for each port and MAC that have an - authentication session currently running under way for them." - REFERENCE - "9.4.3 Authenticator Diagnostics" - ::= { rldot1x 12 } - - rldot1xAuthMultiDiagEntry OBJECT-TYPE - SYNTAX Rldot1xAuthMultiDiagEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "The diagnostics information for an Authenticator PAE." - INDEX { rldot1xAuthMultiDiagPortNumber, rldot1xAuthMultiDiagSourceMac } - ::= { rldot1xAuthMultiDiagTable 1 } - - Rldot1xAuthMultiDiagEntry ::= - SEQUENCE { - rldot1xAuthMultiDiagPortNumber - INTEGER, - rldot1xAuthMultiDiagSourceMac - MacAddress, - rldot1xAuthMultiEntersConnecting - Counter32, - ---------- rldot1xAuthMultiEapLogoffsWhileConnecting - ---------- Counter32, - rldot1xAuthMultiEntersAuthenticating - Counter32, - rldot1xAuthMultiAuthSuccessWhileAuthenticating - Counter32, - ---------- rldot1xAuthMultiAuthTimeoutsWhileAuthenticating - ---------- Counter32, - rldot1xAuthMultiAuthFailWhileAuthenticating - Counter32, - rldot1xAuthMultiAuthReauthsWhileAuthenticating - Counter32, - rldot1xAuthMultiAuthEapStartsWhileAuthenticating - Counter32, - ---------- rldot1xAuthMultiAuthEapLogoffWhileAuthenticating - ---------- Counter32, - rldot1xAuthMultiAuthReauthsWhileAuthenticated - Counter32, - rldot1xAuthMultiAuthEapStartsWhileAuthenticated - Counter32, - ---------- rldot1xAuthMultiAuthEapLogoffWhileAuthenticated - ---------- Counter32, - rldot1xAuthMultiBackendResponses - Counter32, - rldot1xAuthMultiBackendAccessChallenges - Counter32, - rldot1xAuthMultiBackendOtherRequestsToSupplicant - Counter32, - rldot1xAuthMultiBackendNonNakResponsesFromSupplicant - Counter32, - rldot1xAuthMultiBackendAuthSuccesses - Counter32 - ---------- rldot1xAuthMultiBackendAuthFails - ---------- Counter32 - } - - rldot1xAuthMultiDiagPortNumber OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Port Number." - ::= { rldot1xAuthMultiDiagEntry 1 } - - rldot1xAuthMultiDiagSourceMac OBJECT-TYPE - SYNTAX MacAddress - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Mac of the authentication session." - ::= { rldot1xAuthMultiDiagEntry 2 } - - rldot1xAuthMultiEntersConnecting OBJECT-TYPE - SYNTAX Counter32 - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Counts the number of times that the state machine - transitions to the CONNECTING state from any other - state." - REFERENCE - "9.4.2, 8.5.4.2.1" - ::= { rldot1xAuthMultiDiagEntry 3 } - - rldot1xAuthMultiEntersAuthenticating OBJECT-TYPE - SYNTAX Counter32 - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Counts the number of times that the state machine - transitions from CONNECTING to AUTHENTICATING, as a - result of an EAP-Response/Identity message being - received from the Supplicant." - REFERENCE - "9.4.2, 8.5.4.2.3" - ::= { rldot1xAuthMultiDiagEntry 4 } - - rldot1xAuthMultiAuthSuccessWhileAuthenticating OBJECT-TYPE - SYNTAX Counter32 - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Counts the number of times that the state machine - transitions from AUTHENTICATING to AUTHENTICATED, as a - result of the Backend Authentication state machine - indicating successful authentication of the Supplicant - (authSuccess = TRUE)." - REFERENCE - "9.4.2, 8.5.4.2.4" - ::= { rldot1xAuthMultiDiagEntry 5 } - - rldot1xAuthMultiAuthFailWhileAuthenticating OBJECT-TYPE - SYNTAX Counter32 - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Counts the number of times that the state machine - transitions from AUTHENTICATING to HELD, as a result - of the Backend Authentication state machine indicating - authentication failure (authFail = TRUE)." - REFERENCE - "9.4.2, 8.5.4.2.6" - ::= { rldot1xAuthMultiDiagEntry 6 } - - rldot1xAuthMultiAuthReauthsWhileAuthenticating OBJECT-TYPE - SYNTAX Counter32 - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Counts the number of times that the state machine - transitions from AUTHENTICATING to ABORTING, as a result - of a reauthentication request (reAuthenticate = TRUE)." - REFERENCE - "9.4.2, 8.5.4.2.7" - ::= { rldot1xAuthMultiDiagEntry 7 } - - rldot1xAuthMultiAuthEapStartsWhileAuthenticating OBJECT-TYPE - SYNTAX Counter32 - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Counts the number of times that the state machine - transitions from AUTHENTICATING to ABORTING, as a result - of an EAPOL-Start message being received - from the Supplicant." - REFERENCE - "9.4.2, 8.5.4.2.8" - ::= { rldot1xAuthMultiDiagEntry 8 } - - rldot1xAuthMultiAuthReauthsWhileAuthenticated OBJECT-TYPE - SYNTAX Counter32 - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Counts the number of times that the state machine - transitions from AUTHENTICATED to CONNECTING, as a - result of a reauthentication request - (reAuthenticate = TRUE)." - REFERENCE - "9.4.2, 8.5.4.2.10" - ::= { rldot1xAuthMultiDiagEntry 9 } - - rldot1xAuthMultiAuthEapStartsWhileAuthenticated OBJECT-TYPE - SYNTAX Counter32 - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Counts the number of times that the state machine - transitions from AUTHENTICATED to CONNECTING, as a - result of an EAPOL-Start message being received from the - Supplicant." - REFERENCE - "9.4.2, 8.5.4.2.11" - ::= { rldot1xAuthMultiDiagEntry 10 } - - rldot1xAuthMultiBackendResponses OBJECT-TYPE - SYNTAX Counter32 - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Counts the number of times that the state machine sends - an initial Access-Request packet to the Authentication - server (i.e., executes sendRespToServer on entry to the - RESPONSE state). Indicates that the Authenticator - attempted communication with the Authentication Server." - REFERENCE - "9.4.2, 8.5.6.2.1" - ::= { rldot1xAuthMultiDiagEntry 11 } - - rldot1xAuthMultiBackendAccessChallenges OBJECT-TYPE - SYNTAX Counter32 - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Counts the number of times that the state machine - receives an initial Access-Challenge packet from the - Authentication server (i.e., aReq becomes TRUE, - causing exit from the RESPONSE state). Indicates that - the Authentication Server has communication with - the Authenticator." - REFERENCE - "9.4.2, 8.5.6.2.2" - ::= { rldot1xAuthMultiDiagEntry 12 } - - rldot1xAuthMultiBackendOtherRequestsToSupplicant OBJECT-TYPE - SYNTAX Counter32 - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Counts the number of times that the state machine - sends an EAP-Request packet (other than an Identity, - Notification, Failure or Success message) to the - Supplicant (i.e., executes txReq on entry to the - REQUEST state). Indicates that the Authenticator chose - an EAP-method." - REFERENCE - "9.4.2, 8.5.6.2.3" - ::= { rldot1xAuthMultiDiagEntry 13 } - - rldot1xAuthMultiBackendNonNakResponsesFromSupplicant OBJECT-TYPE - SYNTAX Counter32 - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Counts the number of times that the state machine - receives a response from the Supplicant to an initial - EAP-Request, and the response is something other than - EAP-NAK (i.e., rxResp becomes TRUE, causing the state - machine to transition from REQUEST to RESPONSE, - and the response is not an EAP-NAK). Indicates that - the Supplicant can respond to the Authenticators - chosen EAP-method." - REFERENCE - "9.4.2, 8.5.6.2.4" - ::= { rldot1xAuthMultiDiagEntry 14 } - - rldot1xAuthMultiBackendAuthSuccesses OBJECT-TYPE - SYNTAX Counter32 - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Counts the number of times that the state machine - receives an EAP-Success message from the Authentication - Server (i.e., aSuccess becomes TRUE, causing a - transition from RESPONSE to SUCCESS). Indicates that - the Supplicant has successfully authenticated to - the Authentication Server." - REFERENCE - "9.4.2, 8.5.6.2.5" - ::= { rldot1xAuthMultiDiagEntry 15 } - - -------------------------------------------------------------- - -- The Authenticator Session Statistics Table - -------------------------------------------------------------- - - rldot1xAuthMultiSessionStatsTable OBJECT-TYPE - SYNTAX SEQUENCE OF Rldot1xAuthMultiSessionStatsEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "A table that contains the session statistics objects - for the Authenticator PAE associated with each Port. - An entry appears in this table for each port that may - authenticate access to itself." - REFERENCE - "9.4.4" - ::= { rldot1x 13 } - - rldot1xAuthMultiSessionStatsEntry OBJECT-TYPE - SYNTAX Rldot1xAuthMultiSessionStatsEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "The session statistics information for an Authenticator - PAE. This shows the mandatory values being collected for - each session that is still in progress, or the final - values for the last valid session on each port where - there is no session currently active." - INDEX { rldot1xAuthMultiSessionStatsPortNumber, - rldot1xAuthMultiSessionStatsSourceMac } - ::= { rldot1xAuthMultiSessionStatsTable 1 } - - Rldot1xAuthMultiSessionStatsEntry ::= - SEQUENCE { - rldot1xAuthMultiSessionStatsPortNumber - INTEGER, - rldot1xAuthMultiSessionStatsSourceMac - MacAddress, - rldot1xAuthMultiSessionOctetsRx - Counter64, - rldot1xAuthMultiSessionOctetsTx - Counter64, - rldot1xAuthMultiSessionFramesRx - Counter32, - rldot1xAuthMultiSessionFramesTx - Counter32, - rldot1xAuthMultiSessionId - SnmpAdminString, - ---------- rldot1xAuthMultiSessionAuthenticMethod - ---------- INTEGER, - rldot1xAuthMultiSessionTime - TimeTicks, - ---------- rldot1xAuthMultiSessionTerminateCause - ---------- INTEGER, - rldot1xAuthMultiSessionUserName - SnmpAdminString } - - rldot1xAuthMultiSessionStatsPortNumber OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Port Number." - ::= { rldot1xAuthMultiSessionStatsEntry 1 } - - rldot1xAuthMultiSessionStatsSourceMac OBJECT-TYPE - SYNTAX MacAddress - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Mac of the authentication session." - ::= { rldot1xAuthMultiSessionStatsEntry 2 } - - - rldot1xAuthMultiSessionOctetsRx OBJECT-TYPE - SYNTAX Counter64 - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of octets received in user data - frames on this Port during the session." - REFERENCE - "9.4.4, Session Octets Received" - ::= { rldot1xAuthMultiSessionStatsEntry 3 } - - rldot1xAuthMultiSessionOctetsTx OBJECT-TYPE - SYNTAX Counter64 - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of octets transmitted in user data - frames on this Port during the session." - REFERENCE - "9.4.4, Session Octets Transmitted" - ::= { rldot1xAuthMultiSessionStatsEntry 4 } - - rldot1xAuthMultiSessionFramesRx OBJECT-TYPE - SYNTAX Counter32 - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of user data frames received - on this Port during the session." - REFERENCE - "9.4.4, Session Frames Received" - ::= { rldot1xAuthMultiSessionStatsEntry 5 } - - rldot1xAuthMultiSessionFramesTx OBJECT-TYPE - SYNTAX Counter32 - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of user data frames transmitted - on this Port during the session." - REFERENCE - "9.4.4, Session Frames Transmitted" - ::= { rldot1xAuthMultiSessionStatsEntry 6 } - - rldot1xAuthMultiSessionId OBJECT-TYPE - SYNTAX SnmpAdminString - ACCESS read-only - STATUS mandatory - DESCRIPTION - "A unique identifier for the session, in the - form of a printable ASCII string of at least - three characters." - REFERENCE - "9.4.4, Session Identifier" - ::= { rldot1xAuthMultiSessionStatsEntry 7 } - - rldot1xAuthMultiSessionTime OBJECT-TYPE - SYNTAX TimeTicks - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The duration of the session in seconds." - REFERENCE - "9.4.4, Session Time" - ::= { rldot1xAuthMultiSessionStatsEntry 8 } - - rldot1xAuthMultiSessionUserName OBJECT-TYPE - SYNTAX SnmpAdminString - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The User-Name representing the identity of the - Supplicant PAE." - REFERENCE - "9.4.4, Session User Name" - ::= { rldot1xAuthMultiSessionStatsEntry 9 } - - -------------------------------------------------------------- - -- The Authenticator Configuration Table - -------------------------------------------------------------- - - rldot1xAuthMultiConfigTable OBJECT-TYPE - SYNTAX SEQUENCE OF Rldot1xAuthMultiConfigEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "A table that contains the configuration objects for the - Authenticator PAE associated with each port and MAC. - An entry appears in this table for each port and MAC that may - authenticate access to itself." - REFERENCE - "9.4.1 Authenticator Configuration" - ::= { rldot1x 14 } - - rldot1xAuthMultiConfigEntry OBJECT-TYPE - SYNTAX Rldot1xAuthMultiConfigEntry - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "The configuration information for an Authenticator - PAE." - INDEX { rldot1xAuthMultiPortNumber, rldot1xAuthMultiSourceMac } - ::= { rldot1xAuthMultiConfigTable 1 } - - Rldot1xAuthMultiConfigEntry ::= - SEQUENCE { - rldot1xAuthMultiPortNumber - INTEGER, - rldot1xAuthMultiSourceMac - MacAddress, - rldot1xAuthMultiPaeState - INTEGER, - rldot1xAuthMultiBackendAuthState - INTEGER, - rldot1xAuthMultiControlledPortStatus - PaeControlledPortStatus - } - - rldot1xAuthMultiPortNumber OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Port Number." - ::= { rldot1xAuthMultiConfigEntry 1 } - - rldot1xAuthMultiSourceMac OBJECT-TYPE - SYNTAX MacAddress - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Mac of the authentication session." - ::= { rldot1xAuthMultiConfigEntry 2 } - - rldot1xAuthMultiPaeState OBJECT-TYPE - SYNTAX INTEGER { - initialize(1), - disconnected(2), - connecting(3), - authenticating(4), - authenticated(5), - aborting(6), - held(7), - forceAuth(8), - forceUnauth(9) - } - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The current value of the Authenticator PAE state - machine." - REFERENCE - "9.4.1, Authenticator PAE state" - ::= { rldot1xAuthMultiConfigEntry 3 } - - rldot1xAuthMultiBackendAuthState OBJECT-TYPE - SYNTAX INTEGER { - request(1), - response(2), - success(3), - fail(4), - timeout(5), - idle(6), - initialize(7) - } - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The current state of the Backend Authentication - state machine." - REFERENCE - "9.4.1, Backend Authentication state" - ::= { rldot1xAuthMultiConfigEntry 4 } - - rldot1xAuthMultiControlledPortStatus OBJECT-TYPE - SYNTAX PaeControlledPortStatus - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The current value of the controlled Port - status parameter for the Port." - REFERENCE - "9.4.1, AuthControlledPortStatus" - ::= { rldot1xAuthMultiConfigEntry 5 } - -rldot1xBpduFilteringEnabled OBJECT-TYPE - SYNTAX TruthValue - ACCESS read-write - STATUS mandatory - DESCRIPTION - "Specify that when 802.1x is globally disabled, - 802.1x BPDU packets would be filtered or bridged." - ::= { rldot1x 15 } - -rlFile OBJECT IDENTIFIER ::= { rnd 96 } - -rlAAAEap OBJECT IDENTIFIER ::= { rnd 97 } - -rlSNMP OBJECT IDENTIFIER ::= { rnd 98 } - ---rlQosServ OBJECT IDENTIFIER ::= { rnd 99 } - -rlSsl OBJECT IDENTIFIER ::= { rnd 100 } - -rlMacBasePrio OBJECT IDENTIFIER ::= { rnd 101 } - -rlWlanAccessPoint OBJECT IDENTIFIER ::= { rnd 102 } - -rlLocalization OBJECT IDENTIFIER ::= { rnd 103 } - -rlRs232 OBJECT IDENTIFIER ::= { rnd 104 } - -rlNicRedundancy OBJECT IDENTIFIER ::= { rnd 105 } - -rlAmap OBJECT IDENTIFIER ::= { rnd 106 } - -rlStack OBJECT IDENTIFIER ::= { rnd 107 } - -rlPoe OBJECT IDENTIFIER ::= { rnd 108 } - -rlUPnP OBJECT IDENTIFIER ::= { rnd 109 } - -rlLldp OBJECT IDENTIFIER ::= { rnd 110 } - -rlOib OBJECT IDENTIFIER ::= { rnd 111 } - -rlBridgeSecurity OBJECT IDENTIFIER ::= { rnd 112 } - -rlDhcpSpoofing OBJECT IDENTIFIER ::= { rnd 113 } - -rlBonjour OBJECT IDENTIFIER ::= { rnd 114 } - -rlLinksysSmartMIB OBJECT IDENTIFIER ::= { rnd 115 } - -rlBrgMulticast OBJECT IDENTIFIER ::= { rnd 116 } - -rlBrgMcMngr OBJECT IDENTIFIER ::= { rnd 117 } - -rlGlobalIpAddrTable OBJECT IDENTIFIER ::= { rnd 118 } - -dlPrivate OBJECT IDENTIFIER ::= { rnd 119 } - -rlSecuritySuiteMib OBJECT IDENTIFIER ::= { rnd 120 } - -rlIntel OBJECT IDENTIFIER ::= { rnd 121 } - ---xxxx OBJECT IDENTIFIER ::= { rnd 122 } - -rlAutoUpdate OBJECT IDENTIFIER ::= { rnd 123 } - -rlCpuCounters OBJECT IDENTIFIER ::= { rnd 124 } - -rlWlanMIB OBJECT IDENTIFIER ::= { rnd 200 } - -rndEndOfMibGroup OBJECT IDENTIFIER ::= { rnd 1000 } - -rndEndOfMib OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-only - STATUS mandatory - DESCRIPTION - " This variable indicates this is the end of RND MIB." - ::= { rndEndOfMibGroup 1 } - - --- Enterprise-specific traps for RND --- Each enterprise-specific trap has two bound variables describing the exact nature of --- the trap. rndErrorDesc provides a detailed description of the problem, including the --- related interface number, board number or any other applicable variable. --- rndErrorSeverity describes the severity of this problem. - --- Trap template --- ------------- --- TRAP-TYPE --- ENTERPRISE rnd --- VARIABLES { rndErrorDesc, rndErrorSeverity } --- DESCRIPTION --- "" --- ::= --- ------------- - -rxOverflowHWFault TRAP-TYPE - ENTERPRISE rnd - VARIABLES { rndErrorDesc, rndErrorSeverity } - DESCRIPTION - "An RX buffer overflow has occurred in one of the LAN or link - interfaces. The bound variable rndErrorDesc provides the - interface number." - ::= 3 - -txOverflowHWFault TRAP-TYPE - ENTERPRISE rnd - VARIABLES { rndErrorDesc, rndErrorSeverity } - DESCRIPTION - "Interport queue overflow has occurred in one of the LAN or link interfaces. - The bound variable rndErrorDesc provides the interface number." - ::= 4 - -routeTableOverflow TRAP-TYPE - ENTERPRISE rnd - VARIABLES { rndErrorDesc, rndErrorSeverity } - DESCRIPTION - "An overflow condition has occurred in the Routing Table. The Routing - Table is used for IP routing algorithm (RIP)." - ::= 5 - -resetRequired TRAP-TYPE - ENTERPRISE rnd - VARIABLES { rndErrorDesc, rndErrorSeverity } - DESCRIPTION - "This trap indicates that in order to perform the last SET request, a reset operation - of the router/bridge is required. This occurs when the layer 2 routing algorithm is - changed between SPF and Spanning Tree. The reset can be performed manually or - using the variable rndAction." - ::= 10 - -endTftp TRAP-TYPE - ENTERPRISE rnd - VARIABLES { rndErrorDesc, rndErrorSeverity } - DESCRIPTION - "This trap indicates that in the device finished a TFTP - transaction with the management station. - variable rndErrorDesc and rndErrorSeverity provides the actual message - text and severity respectively." - ::= 12 - -abortTftp TRAP-TYPE - ENTERPRISE rnd - VARIABLES { rndErrorDesc, rndErrorSeverity } - DESCRIPTION - "This trap indicates that in the device aborted a TFTP session with - the management station. Variable rndErrorDesc and rndErrorSeverity - provides the actual message text and severity respectively." - ::= 13 - -startTftp TRAP-TYPE - ENTERPRISE rnd - VARIABLES { rndErrorDesc, rndErrorSeverity } - DESCRIPTION - "Informational trap indicating that the device has intiated a - TFTP session. rndErrorDesc will contain the file type in - question" - ::= 14 - -faultBackUp TRAP-TYPE - ENTERPRISE rnd - VARIABLES { rndErrorDesc, rndErrorSeverity } - DESCRIPTION - "Automantic switchover to backup link because of main link fault." - ::= 23 - -mainLinkUp TRAP-TYPE - ENTERPRISE rnd - VARIABLES { rndErrorDesc, rndErrorSeverity } - DESCRIPTION - "Communication returened to main link." - ::= 24 - -ipxRipTblOverflow TRAP-TYPE - ENTERPRISE rnd - VARIABLES { rndErrorDesc, rndErrorSeverity } - DESCRIPTION - "This trap indicates that in an OpenGate IPX RIP table overflow. - The bound variable rndErrorDesc, rndErrorSeverity - provides the actual message text and severity respectively." - ::= 36 - -ipxSapTblOverflow TRAP-TYPE - ENTERPRISE rnd - VARIABLES { rndErrorDesc, rndErrorSeverity } - DESCRIPTION - "This trap indicates that in an OpenGate IPX SAP table overflow. - The bound variable rndErrorDesc, rndErrorSeverity - provides the actual message text and severity respectively." - ::= 37 - -facsAccessVoilation TRAP-TYPE - ENTERPRISE rnd - VARIABLES { rndErrorDesc, rndErrorSeverity } - DESCRIPTION - "This trap indicates that message that fits FACS statenebt with - operation blockAndReport was forward to the interface. The bound - variable rndErrorDesc, rndErrorSeverity(== info ) and - interface Number." - ::= 49 - -autoConfigurationCompleted TRAP-TYPE - ENTERPRISE rnd - VARIABLES { rndErrorDesc, rndErrorSeverity } - DESCRIPTION - "This trap indicates that auto comfiguration completetd succssefully. - The bound variable rndErrorDesc, rndErrorSeverity(== info )" - ::= 50 - -forwardingTabOverflow TRAP-TYPE - ENTERPRISE rnd - VARIABLES { rndErrorDesc, rndErrorSeverity } - DESCRIPTION - "This trap indicates that an overflow condition has occurred in the - layer II Forward Table. - The bound variable rndErrorDesc, rndErrorSeverity(== warning )" - ::= 51 - -framRelaySwitchConnectionUp TRAP-TYPE - ENTERPRISE rnd - VARIABLES { rndErrorDesc, rndErrorSeverity } - DESCRIPTION - "This trap indicates that a connection establish between the Frame - relay Switch and the WanGate. - The bound variable rndErrorDesc, rndErrorSeverity(== warning )" - ::= 53 - -framRelaySwitchConnectionDown TRAP-TYPE - ENTERPRISE rnd - VARIABLES { rndErrorDesc, rndErrorSeverity } - DESCRIPTION - "This trap indicates that a connection between the Frame Relay Switch - and the WanGate failed. - The bound variable rndErrorDesc, rndErrorSeverity(== warning )" - ::= 54 - -errorsDuringInit TRAP-TYPE - ENTERPRISE rnd - VARIABLES { rndErrorDesc, rndErrorSeverity } - DESCRIPTION - "This trap indicates that the an error occured during initialization - The bound variable rndErrorDesc, rndErrorSeverity(== error )" - ::= 61 - -vlanDynPortAdded TRAP-TYPE - ENTERPRISE rnd - VARIABLES { rndErrorDesc, rndErrorSeverity } - DESCRIPTION - "" - ::= 66 - -vlanDynPortRemoved TRAP-TYPE - ENTERPRISE rnd - VARIABLES { rndErrorDesc, rndErrorSeverity } - DESCRIPTION - "" - ::= 67 - -rsSDclientsTableOverflow TRAP-TYPE - ENTERPRISE rnd - VARIABLES { rndErrorDesc, rndErrorSeverity } - DESCRIPTION - "This warning is generated when an overflow occurs in the clients table." - ::= 68 - -rsSDinactiveServer TRAP-TYPE - ENTERPRISE rnd - VARIABLES { rndErrorDesc, rndErrorSeverity } - DESCRIPTION - "This warning is generated when a server does not respond to the dispatchers polling - and is thought to be inactive." - ::= 69 - -rsIpZhrConnectionsTableOverflow TRAP-TYPE - ENTERPRISE rnd - VARIABLES { rndErrorDesc, rndErrorSeverity } - DESCRIPTION - "The Zero Hop Routing connections Table has been overflown." - ::= 70 - -rsIpZhrReqStaticConnNotAccepted TRAP-TYPE - ENTERPRISE rnd - VARIABLES { rndErrorDesc, rndErrorSeverity } - DESCRIPTION - "The requested static connection was not accepted because there is - no available IP virtual address to allocate to it." - ::= 71 - -rsIpZhrVirtualIpAsSource TRAP-TYPE - ENTERPRISE rnd - VARIABLES { rndErrorDesc, rndErrorSeverity } - DESCRIPTION - "The virtual IP address appeared as a source IP. - All the connections using it will be deleted and - it will not be further allocated to new connections." - ::= 72 - -rsIpZhrNotAllocVirtualIp TRAP-TYPE - ENTERPRISE rnd - VARIABLES { rndErrorDesc, rndErrorSeverity } - DESCRIPTION - "The source IP address sent an ARP specifying a virtual IP - which was not allocated for this source. - This virtual IP will not be allocated to connections of this - specific source IP." - ::= 73 - -rsSnmpSetRequestInSpecialCfgState TRAP-TYPE - ENTERPRISE rnd - VARIABLES { rndErrorDesc, rndErrorSeverity } - DESCRIPTION - "An incoming SNMP SET request was rejected because no such - requests (except action requests) are accepted after start of - new configuration reception or during sending the current - configuration to an NMS." - ::= 74 - -rsPingCompletion TRAP-TYPE - ENTERPRISE rnd - VARIABLES { rndErrorDesc, rndErrorSeverity } - DESCRIPTION - "A rsPingCompleted trap is sent at the completion - of a sequence of pings if such a trap was requested - when the sequence was initiated. The trap severity is info. - The trap text will specify the following information: - rsPingCompletionStatus, rsPingSentPackets, rsPingReceivedPackets - In addition to the above listed objects (which are always present), - the message will also specify the following quantities: - if any responses were received: - rsPingMinReturnTime - rsPingAvgReturnTime - rsPingMaxReturnTime" - ::= 136 - -pppSecurityViolation TRAP-TYPE - ENTERPRISE rnd - VARIABLES { rndErrorDesc, rndErrorSeverity } - DESCRIPTION - "This trap indicates that a PPP link got an unrecognized secret. - The bound variables rndErrorDesc, - rndErrorSeverity(== warning ), interface Number. and pppSecurityIdentity" - ::= 137 - -frDLCIStatudChange TRAP-TYPE - ENTERPRISE rnd - VARIABLES { rndErrorDesc, rndErrorSeverity } - DESCRIPTION - "" - ::= 138 - -papFailedCommunication TRAP-TYPE - ENTERPRISE rnd - VARIABLES { rndErrorDesc, rndErrorSeverity } - DESCRIPTION - "" - ::= 139 - -chapFailedCommunication TRAP-TYPE - ENTERPRISE rnd - VARIABLES { rndErrorDesc, rndErrorSeverity } - DESCRIPTION - "" - ::= 140 - -rsWSDRedundancySwitch TRAP-TYPE - ENTERPRISE rnd - VARIABLES { rndErrorDesc, rndErrorSeverity } - DESCRIPTION - "Whenever main server fails and backup takes over or server comes - up after failure a trap of this type is issued." - ::= 141 - -rsDhcpAllocationFailure TRAP-TYPE - ENTERPRISE rnd - VARIABLES { rndErrorDesc, rndErrorSeverity } - DESCRIPTION - "DHCP failed to allocate an IP address to a requesting host - because of memory shortage or inadequate configuration of - available IP addresses." - ::= 142 - --- Traps 143 - 144 reserved for IP Multicast - -rlIpFftStnOverflow TRAP-TYPE - ENTERPRISE rnd - VARIABLES { rndErrorDesc, rndErrorSeverity } - DESCRIPTION - "The IP SFFT overflow." - ::= 145 - -rlIpFftSubOverflow TRAP-TYPE - ENTERPRISE rnd - VARIABLES { rndErrorDesc, rndErrorSeverity } - DESCRIPTION - "The IP NFFT overflow." - ::= 146 - -rlIpxFftStnOverflow TRAP-TYPE - ENTERPRISE rnd - VARIABLES { rndErrorDesc, rndErrorSeverity } - DESCRIPTION - "The IPX SFFT overflow." - ::= 147 - -rlIpxFftSubOverflow TRAP-TYPE - ENTERPRISE rnd - VARIABLES { rndErrorDesc, rndErrorSeverity } - DESCRIPTION - "The IPX NFFT overflow." - ::= 148 - -rlIpmFftOverflow TRAP-TYPE - ENTERPRISE rnd - VARIABLES { rndErrorDesc, rndErrorSeverity } - DESCRIPTION - "The IPM FFT overflow." - ::= 149 - -rlPhysicalDescriptionChanged TRAP-TYPE - ENTERPRISE rnd - VARIABLES { rndErrorDesc, rndErrorSeverity } - DESCRIPTION - "Indicates that the physical decription of the device has - changed" - ::= 150 - -rldot1dStpPortStateForwarding TRAP-TYPE - ENTERPRISE rnd - VARIABLES { rndErrorDesc, rndErrorSeverity, - rldot1dStpTrapVrblifIndex, rldot1dStpTrapVrblVID } - DESCRIPTION - "The trap is sent by a bridge when any of its configured ports - transitions from the Learning state to the Forwarding state." - ::= 151 - -rldot1dStpPortStateNotForwarding TRAP-TYPE - ENTERPRISE rnd - VARIABLES { rndErrorDesc, rndErrorSeverity, - rldot1dStpTrapVrblifIndex, rldot1dStpTrapVrblVID } - DESCRIPTION - "The trap is sent by a bridge when any of its configured ports - transitions from the Forwarding state to the Blocking state." - ::= 152 - -rlPolicyDropPacketTrap TRAP-TYPE - ENTERPRISE rnd - VARIABLES { rndErrorDesc, rndErrorSeverity } - DESCRIPTION - "Indicates that the packet drop due to the policy " - ::= 153 - -rlPolicyForwardPacketTrap TRAP-TYPE - ENTERPRISE rnd - VARIABLES { rndErrorDesc, rndErrorSeverity } - DESCRIPTION - "Indicates that the packet has forward based on policy" - ::= 154 - --- Trap 155 - 144 reserved for DVMRP - -rlIgmpProxyTableOverflow TRAP-TYPE - ENTERPRISE rnd - VARIABLES { rndErrorDesc, rndErrorSeverity } - DESCRIPTION - "An IGMP PROXY Table overflow." - ::= 156 - -rlIgmpV1MsgReceived TRAP-TYPE - ENTERPRISE rnd - VARIABLES { rndErrorDesc, rndErrorSeverity } - DESCRIPTION - "An IGMP Message of v1 received on ifIndex. " - ::= 157 - -rlVrrpEntriesDeleted TRAP-TYPE - ENTERPRISE rnd - VARIABLES { rndErrorDesc, rndErrorSeverity} - DESCRIPTION - "One or more VRRP entries deleted due to IP interface deletion or transition. " - ::= 158 - -rlHotSwapTrap TRAP-TYPE - ENTERPRISE rnd - VARIABLES {rndErrorDesc, rndErrorSeverity} - DESCRIPTION - "Hot swap trap." - ::= 159 - -rlTrunkPortAddedTrap TRAP-TYPE - ENTERPRISE rnd - VARIABLES { rndErrorDesc, rndErrorSeverity } - DESCRIPTION - "Informational trap indicating that a port is added to a trunk" - ::= 160 - -rlTrunkPortRemovedTrap TRAP-TYPE - ENTERPRISE rnd - VARIABLES { rndErrorDesc, rndErrorSeverity } - DESCRIPTION - "This warning is generated when a port removed from a trunk." - ::= 161 - -rlTrunkPortNotCapableTrap TRAP-TYPE - ENTERPRISE rnd - VARIABLES { rndErrorDesc, rndErrorSeverity } - DESCRIPTION - "Informational trap indicating that a port can not be added to - a trunk because of device limitations or diffrent swIfType." - ::= 162 - --- Traps 163 - 169 reserved for IP Multicast - -rlLockPortTrap TRAP-TYPE - ENTERPRISE rnd - VARIABLES { rndErrorDesc, rndErrorSeverity } - DESCRIPTION - "Informational trap indicating that a locked port receive - a frame with new source Mac Address." - ::= 170 - -vlanDynVlanAdded TRAP-TYPE - ENTERPRISE rnd - VARIABLES { rndErrorDesc, rndErrorSeverity } - DESCRIPTION - "add gvrp dynamic vlan" - ::= 171 - -vlanDynVlanRemoved TRAP-TYPE - ENTERPRISE rnd - VARIABLES { rndErrorDesc, rndErrorSeverity } - DESCRIPTION - "remove gvrp dynamic vlan" - ::= 172 - -vlanDynamicToStatic TRAP-TYPE - ENTERPRISE rnd - VARIABLES { rndErrorDesc, rndErrorSeverity } - DESCRIPTION - "vlan status was changed from dynamic to static" - ::= 173 - -vlanStaticToDynamic TRAP-TYPE - ENTERPRISE rnd - VARIABLES { rndErrorDesc, rndErrorSeverity } - DESCRIPTION - "vlan status was changed from static to dynamic" - ::= 174 - -dstrSysLog TRAP-TYPE - ENTERPRISE rnd - VARIABLES { rndErrorDesc, rndErrorSeverity } - DESCRIPTION - "Master receive trap from slave , and forward it as trap" - ::= 175 - -rlEnvMonFanStateChange TRAP-TYPE - ENTERPRISE rnd - VARIABLES { rndErrorDesc, rndErrorSeverity } - DESCRIPTION - "Trap indicating the fan state. - rndErrorSeverity will be: - 0 for fan state nomal, notPresent - 1 for fan state warning, notFunctioning - 2 for fan state critical - 3 for fan state fatal - The error text will specify the fan index, fan description and the exact fan state" - ::= 176 - -rlEnvMonPowerSupplyStateChange TRAP-TYPE - ENTERPRISE rnd - VARIABLES { rndErrorDesc, rndErrorSeverity } - DESCRIPTION - "Trap indicating the power supply state. - rndErrorSeverity will be: - 0 for power supply state nomal, notPresent - 1 for power supply state warning, notFunctioning - 2 for power supply state critical - 3 for power supply state fatal - The error text will specify the power supply index, power supply description and the exact power supply state" - - ::= 177 - -rlStackStateChange TRAP-TYPE - ENTERPRISE rnd - VARIABLES { rndErrorDesc, rndErrorSeverity } - DESCRIPTION - "Trap indicating the stack connection state - 0 for stack state connected, - 1 for stack state disconnected " - - ::= 178 - -rlEnvMonTemperatureRisingAlarm TRAP-TYPE - ENTERPRISE rnd - VARIABLES { rndErrorDesc, rndErrorSeverity } - DESCRIPTION - "Trap indicating that the temperature in the device has exceeded the - device specific safe temperature threshold." - - ::= 179 - --- Traps 180, 181 reserved for copy - --- Trap 182 reserved for IP Multicast - -rlBrgMacAddFailedTrap TRAP-TYPE - ENTERPRISE rnd - VARIABLES { rndErrorDesc, rndErrorSeverity } - DESCRIPTION - "Informational trap indicating that adding dynamic mac/s - failed due to full hash chain." - ::= 183 - -rldot1xPortStatusAuthorizedTrap TRAP-TYPE - ENTERPRISE rnd - VARIABLES { rndErrorDesc, rndErrorSeverity } - DESCRIPTION - "Informational trap indicating that port 802.1x status is authorized." - ::= 184 - -rldot1xPortStatusUnauthorizedTrap TRAP-TYPE - ENTERPRISE rnd - VARIABLES { rndErrorDesc, rndErrorSeverity } - DESCRIPTION - "Warning trap is indicating that port 802.1x status is unAuthorized." - ::= 185 - --- 186-191 are used in the rlPhysicalDescription MIB - -swIfTablePortLock TRAP-TYPE - ENTERPRISE rnd - VARIABLES { rndErrorDesc, rndErrorSeverity } - DESCRIPTION - "Warning trap is indicating port lock hase began." - ::= 192 - -swIfTablePortUnLock TRAP-TYPE - ENTERPRISE rnd - VARIABLES { rndErrorDesc, rndErrorSeverity } - DESCRIPTION - "Warning trap is indicating port lock has ended." - ::= 193 - -rlAAAUserLocked TRAP-TYPE - ENTERPRISE rnd - VARIABLES { rndErrorDesc, rndErrorSeverity } - DESCRIPTION - "Warning trap indicating that the user was locked after - number of consecutives unsuccessful login attempts." - ::= 194 - --- 195-199 are used in the rlPhysicalDescription MIB - -bpduGuardPortSuspended TRAP-TYPE - ENTERPRISE rnd - VARIABLES { rndErrorDesc, rndErrorSeverity } - DESCRIPTION - "Warning trap indicating - Port was suspended because there was BPDU Guard violation." - ::= 202 - -rldot1xSupplicantMacAuthorizedTrap TRAP-TYPE - ENTERPRISE rnd - VARIABLES { rndErrorDesc, rndErrorSeverity } - DESCRIPTION - "Informational trap indicating that MAC authentication supplicant - is authenticated and is allowed to access the network." - ::= 203 - -rldot1xSupplicantMacUnauthorizedTrap TRAP-TYPE - ENTERPRISE rnd - VARIABLES { rndErrorDesc, rndErrorSeverity } - DESCRIPTION - "Warning trap is indicating that Radius server rejects - MAC authentication supplicant." - ::= 204 - -stpLoopbackDetection TRAP-TYPE - ENTERPRISE rnd - VARIABLES { rndErrorDesc, rndErrorSeverity } - DESCRIPTION - "Warning trap indicating - A loopback was detected on port." - ::= 205 - -stpLoopbackDetectionResolved TRAP-TYPE - ENTERPRISE rnd - VARIABLES { rndErrorDesc, rndErrorSeverity } - DESCRIPTION - "Warning trap indicating - A loopback detection resolved on port." - ::= 206 - -END - diff --git a/mibs/radlan/draft-ietf-entmib-sensor-mib.mib b/mibs/radlan/draft-ietf-entmib-sensor-mib.mib deleted file mode 100644 index 185f8043d9..0000000000 --- a/mibs/radlan/draft-ietf-entmib-sensor-mib.mib +++ /dev/null @@ -1,439 +0,0 @@ -ENTITY-SENSOR-MIB DEFINITIONS ::= BEGIN - --- draft-ietf-entmib-sensor-mib-02.txt - -IMPORTS - rlEnv FROM RADLAN-MIB - MODULE-IDENTITY, OBJECT-TYPE, - Integer32, Unsigned32, mib-2 - FROM SNMPv2-SMI - MODULE-COMPLIANCE, OBJECT-GROUP - FROM SNMPv2-CONF - TEXTUAL-CONVENTION, TimeStamp - FROM SNMPv2-TC - entPhysicalIndex, entityPhysicalGroup - FROM ENTITY-MIB - SnmpAdminString - FROM SNMP-FRAMEWORK-MIB; - -entitySensorMIB MODULE-IDENTITY - LAST-UPDATED "200210160000Z" - ORGANIZATION "IETF Entity MIB Working Group" - CONTACT-INFO - " Andy Bierman - Cisco Systems, Inc. - Tel: +1 408-527-3711 - E-mail: abierman@cisco.com - Postal: 170 West Tasman Drive - San Jose, CA USA 95134 - - Dan Romascanu - Avaya Communication - Tel: +972-3-645-8414 - Email: dromasca@avaya.com - Postal: Atidim technology Park, Bldg. #3 - Tel Aviv, Israel, 61131 - - K.C. Norseth - L-3 Communications - Tel: +1 801-594-2809 - Email: kenyon.c.norseth@L-3com.com - Postal: 640 N. 2200 West. - Salt Lake City, Utah 84116-0850 - - Send comments to - Mailing list subscription info: - http://www.ietf.org/mailman/listinfo/entmib " - DESCRIPTION - "This module defines Entity MIB extensions for physical - sensors." - REVISION "200210160000Z" - DESCRIPTION - "Initial version of the Entity Sensor MIB module, published - as RFC xxxx." -- RFC Editor assigns xxxx --- ::= { mib-2 xxx } ## IANA needs to assign xxx - ::= { rlEnv 2 } - -entitySensorObjects OBJECT IDENTIFIER - ::= { entitySensorMIB 1 } --- entitySensorNotifications OBJECT IDENTIFIER --- ::= { entitySensorMIB 2 } -entitySensorConformance OBJECT IDENTIFIER - ::= { entitySensorMIB 3 } - --- --- Textual Conventions --- - -EntitySensorDataType ::= TEXTUAL-CONVENTION - STATUS current - DESCRIPTION - "An object using this data type represents the Entity Sensor - measurement data type associated with a physical sensor - value. The actual data units are determined by examining an - object of this type together with the associated - EntitySensorDataScale object. - - An object of this type SHOULD be defined together with - objects of type EntitySensorDataScale and - EntitySensorPrecision. Together, associated objects of - these three types are used to identify the semantics of an - object of type EntitySensorValue. - - Valid values are: - - other(1): a measure other than those listed below - unknown(2): unknown measurement, or arbitrary, - relative numbers - voltsAC(3): electric potential - voltsDC(4): electric potential - amperes(5): electric current - watts(6): power - hertz(7): frequency - celsius(8): temperature - percentRH(9): percent relative humidity - rpm(10): shaft revolutions per minute - cmm(11),: cubic meters per minute (airflow) - truthvalue(12): value takes { true(1), false(2) } - - " - SYNTAX INTEGER { - other(1), - unknown(2), - voltsAC(3), - voltsDC(4), - amperes(5), - watts(6), - hertz(7), - celsius(8), - percentRH(9), - rpm(10), - cmm(11), - truthvalue(12) - } - -EntitySensorDataScale ::= TEXTUAL-CONVENTION - STATUS current - DESCRIPTION - "An object using this data type represents a data scaling - factor, represented with an International System of Units - (SI) prefix. The actual data units are determined by - examining an object of this type together with the - associated EntitySensorDataType object. - - An object of this type SHOULD be defined together with - objects of type EntitySensorDataType and - EntitySensorPrecision. Together, associated objects of - these three types are used to identify the semantics of an - object of type EntitySensorValue." - REFERENCE - "TBD" - SYNTAX INTEGER { - yocto(1), -- 10^-24 - zepto(2), -- 10^-21 - atto(3), -- 10^-18 - femto(4), -- 10^-15 - pico(5), -- 10^-12 - nano(6), -- 10^-9 - micro(7), -- 10^-6 - milli(8), -- 10^-3 - units(9), -- 10^0 - kilo(10), -- 10^3 - mega(11), -- 10^6 - giga(12), -- 10^9 - tera(13), -- 10^12 - exa(14), -- 10^15 - peta(15), -- 10^18 - zetta(16), -- 10^21 - yotta(17) -- 10^24 - } - -EntitySensorPrecision ::= TEXTUAL-CONVENTION - STATUS current - DESCRIPTION - "An object using this data type represents a sensor - precision range. - - An object of this type SHOULD be defined together with - objects of type EntitySensorDataType and - EntitySensorDataScale. Together, associated objects of - these three types are used to identify the semantics of an - object of type EntitySensorValue. - - If an object of this type contains a value in the range 1 to - 9, it represents the number of decimal places in the - fractional part of an associated EntitySensorValue fixed- - point number. - - If an object of this type contains a value in the range -8 - to -1, it represents the number of accurate digits in the - associated EntitySensorValue fixed-point number. - - The value zero indicates the associated EntitySensorValue - object is not a fixed-point number. - - Agent implementors must choose a value for the associated - EntitySensorPrecision object so that the precision and - accuracy of the associated EntitySensorValue object is - correctly indicated. - - For example, a physical entity representing a temperature - sensor that can measure 0 degrees to 100 degrees C in 0.1 - degree increments, +/- 0.05 degrees, would have an - EntitySensorPrecision value of '1', an EntitySensorDataScale - value of 'units(9)', and an EntitySensorValue ranging from - '0' to '1000'. The EntitySensorValue would be interpreted - as 'degrees C * 10'." - SYNTAX Integer32 (-8..9) - -EntitySensorValue ::= TEXTUAL-CONVENTION - STATUS current - DESCRIPTION - "An object using this data type represents an Entity Sensor - value. - An object of this type SHOULD be defined together with - objects of type EntitySensorDataType, EntitySensorDataScale - and EntitySensorPrecision. Together, associated objects of - those three types are used to identify the semantics of an - object of this data type. - - The semantics of an object using this data type are - determined by the value of the associated - EntitySensorDataType object. - - If the associated EntitySensorDataType object is equal to - 'voltsAC(3)', 'voltsDC(4)', 'amperes(5)', 'watts(6), - 'hertz(7)', 'celsius(8)', or 'cmm(11)', then an object of - this type MUST contain a fixed point number ranging from - -999,999,999 to +999,999,999. The value -1000000000 - indicates an underflow error. The value +1000000000 - indicates an overflow error. The EntitySensorPrecision - indicates how many fractional digits are represented in the - associated EntitySensorValue object. - - If the associated EntitySensorDataType object is equal to - 'percentRH(9)', then an object of this type MUST contain a - number ranging from 0 to 100. - - If the associated EntitySensorDataType object is equal to - 'rpm(10)', then an object of this type MUST contain a number - ranging from -999,999,999 to +999,999,999. - - If the associated EntitySensorDataType object is equal to - 'truthvalue(12)', then an object of this type MUST contain - either the value 'true(1)' or the value 'false(2)'. - - If the associated EntitySensorDataType object is equal to - 'other(1)' or unknown(2)', then an object of this type MUST - contain a number ranging from -1000000000 to 1000000000." - SYNTAX Integer32 (-1000000000..1000000000) - -EntitySensorStatus ::= TEXTUAL-CONVENTION - STATUS current - DESCRIPTION - "An object using this data type represents the operational - status of a physical sensor. - - The value 'ok(1)' indicates that the agent can obtain the - sensor value. - - The value 'unavailable(2)' indicates that the agent - presently cannot obtain the sensor value. - - The value 'nonoperational(3)' indicates that the agent - believes the sensor is broken. The sensor could have a hard - failure (disconnected wire), or a soft failure such as out- - of-range, jittery, or wildly fluctuating readings." - SYNTAX INTEGER { - ok(1), - unavailable(2), - nonoperational(3) - } - --- --- Entity Sensor Table --- - -entPhySensorTable OBJECT-TYPE - SYNTAX SEQUENCE OF EntPhySensorEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "This table contains one row per physical sensor represented - by an associated row in the entPhysicalTable." - ::= { entitySensorObjects 1 } - -entPhySensorEntry OBJECT-TYPE - SYNTAX EntPhySensorEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "Information about a particular physical sensor. - - An entry in this table describes the present reading of a - sensor, the measurement units and scale, and sensor - operational status. - - Entries are created in this table by the agent. An entry - for each physical sensor SHOULD be created at the same time - as the associated entPhysicalEntry. An entry SHOULD be - destroyed if the associated entPhysicalEntry is destroyed." - INDEX { entPhysicalIndex } -- SPARSE-AUGMENTS - ::= { entPhySensorTable 1 } - -EntPhySensorEntry ::= SEQUENCE { - entPhySensorType EntitySensorDataType, - entPhySensorScale EntitySensorDataScale, - entPhySensorPrecision EntitySensorPrecision, - entPhySensorValue EntitySensorValue, - entPhySensorOperStatus EntitySensorStatus, - entPhySensorUnitsDisplay SnmpAdminString, - entPhySensorValueTimeStamp TimeStamp, - entPhySensorValueUpdateRate Unsigned32 -} - -entPhySensorType OBJECT-TYPE - SYNTAX EntitySensorDataType - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The type of data returned by the associated - entPhySensorValue object. - - This object SHOULD be set by the agent during entry - creation, and the value SHOULD NOT change during operation." - ::= { entPhySensorEntry 1 } - -entPhySensorScale OBJECT-TYPE - SYNTAX EntitySensorDataScale - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The exponent to apply to values returned by the associated - entPhySensorValue object. - - This object SHOULD be set by the agent during entry - creation, and the value SHOULD NOT change during operation." - ::= { entPhySensorEntry 2 } - -entPhySensorPrecision OBJECT-TYPE - SYNTAX EntitySensorPrecision - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The number of decimal places of precision in fixed-point - sensor values returned by the associated entPhySensorValue - object. - - This object SHOULD be set to '0' when the associated - entPhySensorType value is not a fixed-point type: e.g., - 'percentRH(9)', 'rpm(10)', 'cmm(11)', or 'truthvalue(12)'. - - This object SHOULD be set by the agent during entry - creation, and the value SHOULD NOT change during operation." - ::= { entPhySensorEntry 3 } - -entPhySensorValue OBJECT-TYPE - SYNTAX EntitySensorValue - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The most recent measurement obtained by the agent for this - sensor. - - To correctly interpret the value of this object, the - associated entPhySensorType, entPhySensorScale, and - entPhySensorPrecision objects must also be examined." - ::= { entPhySensorEntry 4 } - -entPhySensorOperStatus OBJECT-TYPE - SYNTAX EntitySensorStatus - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The operational status of the sensor." - ::= { entPhySensorEntry 5 } - -entPhySensorUnitsDisplay OBJECT-TYPE - SYNTAX SnmpAdminString - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "A textual description of the data units that should be used - in the display of entPhySensorValue." - ::= { entPhySensorEntry 6 } - -entPhySensorValueTimeStamp OBJECT-TYPE - SYNTAX TimeStamp - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The value of sysUpTime at the time the status and/or value - of this sensor was last obtained by the agent." - ::= { entPhySensorEntry 7 } - -entPhySensorValueUpdateRate OBJECT-TYPE - SYNTAX Unsigned32 - UNITS "milliseconds" - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "An indication of the frequency that the agent updates the - associated entPhySensorValue object, representing in - milliseconds. - - The value zero indicates: - - - the sensor value is updated on demand (e.g., - when polled by the agent for a get-request), - - the sensor value is updated when the sensor - value changes (event-driven), - - the agent does not know the update rate. - - " - ::= { entPhySensorEntry 8 } - --- --- Conformance Section --- - -entitySensorCompliances OBJECT IDENTIFIER - ::= { entitySensorConformance 1 } -entitySensorGroups OBJECT IDENTIFIER - ::= { entitySensorConformance 2 } - -entitySensorCompliance MODULE-COMPLIANCE - STATUS current - DESCRIPTION - "Describes the requirements for conformance to the Entity - Sensor MIB module." - MODULE -- this module - MANDATORY-GROUPS { entitySensorValueGroup } - - MODULE ENTITY-MIB - MANDATORY-GROUPS { entityPhysicalGroup } - - ::= { entitySensorCompliances 1 } - --- Object Groups - -entitySensorValueGroup OBJECT-GROUP - OBJECTS { - entPhySensorType, - entPhySensorScale, - entPhySensorPrecision, - entPhySensorValue, - entPhySensorOperStatus, - entPhySensorUnitsDisplay, - entPhySensorValueTimeStamp, - entPhySensorValueUpdateRate - } - STATUS current - DESCRIPTION - "A collection of objects representing physical entity sensor - information." - ::= { entitySensorGroups 1 } - -END - -