clean up more mib names (remove .txt, .mib, .my)

git-svn-id: http://www.observium.org/svn/observer/trunk@1645 61d68cd4-352d-0410-923a-c4978735b2b8

mibs/IPV6-TC

@@ -0,0 +1,67 @@
+IPV6-TC DEFINITIONS ::= BEGIN
+
+IMPORTS
+     Integer32                FROM SNMPv2-SMI
+     TEXTUAL-CONVENTION       FROM SNMPv2-TC;
+
+
+-- definition of textual conventions
+Ipv6Address ::= TEXTUAL-CONVENTION
+     DISPLAY-HINT "2x:"
+     STATUS       current
+     DESCRIPTION
+       "This data type is used to model IPv6 addresses.
+        This is a binary string of 16 octets in network
+        byte-order."
+     SYNTAX       OCTET STRING (SIZE (16))
+
+Ipv6AddressPrefix ::= TEXTUAL-CONVENTION
+     DISPLAY-HINT "2x:"
+     STATUS       current
+     DESCRIPTION
+       "This data type is used to model IPv6 address
+       prefixes. This is a binary string of up to 16
+       octets in network byte-order."
+     SYNTAX       OCTET STRING (SIZE (0..16))
+
+Ipv6AddressIfIdentifier ::= TEXTUAL-CONVENTION
+     DISPLAY-HINT "2x:"
+     STATUS       current
+     DESCRIPTION
+       "This data type is used to model IPv6 address
+       interface identifiers. This is a binary string
+        of up to 8 octets in network byte-order."
+     SYNTAX      OCTET STRING (SIZE (0..8))
+
+Ipv6IfIndex ::= TEXTUAL-CONVENTION
+     DISPLAY-HINT "d"
+     STATUS       current
+     DESCRIPTION
+       "A unique value, greater than zero for each
+       internetwork-layer interface in the managed
+       system. It is recommended that values are assigned
+       contiguously starting from 1. The value for each
+       internetwork-layer interface must remain constant
+       at least from one re-initialization of the entity's
+       network management system to the next
+       re-initialization."
+     SYNTAX       Integer32 (1..2147483647)
+
+Ipv6IfIndexOrZero ::= TEXTUAL-CONVENTION
+     DISPLAY-HINT "d"
+     STATUS       current
+     DESCRIPTION
+         "This textual convention is an extension of the
+         Ipv6IfIndex convention.  The latter defines
+         a greater than zero value used to identify an IPv6
+         interface in the managed system.  This extension
+         permits the additional value of zero.  The value
+         zero is object-specific and must therefore be
+         defined as part of the description of any object
+         which uses this syntax.  Examples of the usage of
+         zero might include situations where interface was
+         unknown, or when none or all interfaces need to be
+         referenced."
+     SYNTAX       Integer32 (0..2147483647)
+
+END