From 65fc0c97dbef7feafecd9f779b68bd2a263b96eb Mon Sep 17 00:00:00 2001 From: Adam Amstrong Date: Tue, 24 Mar 2009 10:43:40 +0000 Subject: [PATCH] added new mib git-svn-id: http://www.observium.org/svn/observer/trunk@364 61d68cd4-352d-0410-923a-c4978735b2b8 --- mibs/.index | 1 + mibs/CISCO-VLAN-MEMBERSHIP-MIB.my | 732 ++++++++++++++++++++++++++++++ 2 files changed, 733 insertions(+) create mode 100644 mibs/CISCO-VLAN-MEMBERSHIP-MIB.my diff --git a/mibs/.index b/mibs/.index index b60a60006f..bc84c609fd 100644 --- a/mibs/.index +++ b/mibs/.index @@ -50,6 +50,7 @@ NETSCREEN-ZONE-MIB NS-ZONE.mib MPLS-L3VPN-STD-MIB MPLS-L3VPN-STD-MIB.my CISCO-IETF-PW-MPLS-MIB CISCO-IETF-PW-MPLS-MIB.my CISCO-TCP-MIB CISCO-TCP-MIB.my +CISCO-VLAN-MEMBERSHIP-MIB CISCO-VLAN-MEMBERSHIP-MIB.my FRAME-RELAY-DTE-MIB FRAME-RELAY-DTE-MIB NETSCREEN-SET-GEN-MIB NS-SET-GEN.mib NETSCREEN-SET-DNS-MIB NS-SET-DNS.mib diff --git a/mibs/CISCO-VLAN-MEMBERSHIP-MIB.my b/mibs/CISCO-VLAN-MEMBERSHIP-MIB.my new file mode 100644 index 0000000000..1249d643ff --- /dev/null +++ b/mibs/CISCO-VLAN-MEMBERSHIP-MIB.my @@ -0,0 +1,732 @@ +CISCO-VLAN-MEMBERSHIP-MIB DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, + NOTIFICATION-TYPE, + Counter32, Integer32, IpAddress FROM SNMPv2-SMI + MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF + TEXTUAL-CONVENTION, RowStatus, + TruthValue FROM SNMPv2-TC + ifIndex FROM IF-MIB + ciscoMgmt FROM CISCO-SMI; + +ciscoVlanMembershipMIB MODULE-IDENTITY + LAST-UPDATED "200101300000Z" + ORGANIZATION "Cisco Systems Inc. " + CONTACT-INFO + "Cisco Systems + Customer Service + + Postal: 170 W Tasman Drive + San Jose, CA 95134 + USA + + Tel: +1 800 553-NETS + + E-mail: cs-vlans@cisco.com" + DESCRIPTION + "The MIB module for the management of the + VLAN Membership within the frame work of Cisco + VLAN Architecture, v 2.0 by Keith McCloghrie. The MIB + provides information on VLAN Membership Policy Servers + used by a device and VLAN membership assignments of + non-trunk bridge ports of the device." + REVISION "200101300000Z" + DESCRIPTION + "Corrected description of vmVmpsReconfirmResult" + REVISION "200001060000Z" + DESCRIPTION + "Added 4k VLAN support" + REVISION "9901180000Z" + DESCRIPTION + "Add vmNotificationsEnabled. + Add support for multi-vlan ports. + Other minor edits." + REVISION "9612060000Z" + DESCRIPTION + "Initial version of this MIB module." + ::= { ciscoMgmt 68 } + +ciscoVlanMembershipMIBObjects + OBJECT IDENTIFIER ::= { ciscoVlanMembershipMIB 1 } + +-- Textual Conventions +VlanIndex ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + " The (ISL) VLAN id of a VLAN which uniquely identifies + a VLAN within a management domain. + Implementations are allowed to restrict the range of + VLANs." + SYNTAX INTEGER(1..4095) + +vmVmps OBJECT IDENTIFIER ::= + { ciscoVlanMembershipMIBObjects 1 } + +vmMembership OBJECT IDENTIFIER ::= + { ciscoVlanMembershipMIBObjects 2 } + +vmStatistics OBJECT IDENTIFIER ::= + { ciscoVlanMembershipMIBObjects 3 } + +vmStatus OBJECT IDENTIFIER ::= + { ciscoVlanMembershipMIBObjects 4 } + +-- General Info +vmVmpsVQPVersion OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The VLAN Query Protocol (VQP) version supported on + the device. VQP is the protocol used to query + VLAN Membership Policy Server (VMPS) for VLAN + membership assignments of dynamic VLAN ports. + A VMPS provides VLAN membership policy + assignments based on the content of the packets + received on a port. " + ::= { vmVmps 1 } + +vmVmpsRetries OBJECT-TYPE + SYNTAX INTEGER(1..10) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The number of retries for VQP requests to a VMPS before + using the next available VMPS." + ::= { vmVmps 2 } + +vmVmpsReconfirmInterval OBJECT-TYPE + SYNTAX INTEGER (0..120) + UNITS "Minutes" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The switch will reconfirm membership of addresses on + each port with VMPS periodically. This object specifies + the interval to perform reconfirmation. If the value is + set to 0, the switch does not reconfirm membership with + VMPS." + DEFVAL { 60 } + ::= { vmVmps 3 } + +vmVmpsReconfirm OBJECT-TYPE + SYNTAX INTEGER { ready(1), execute(2) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Setting this object to execute(2) causes the switch + to reconfirm membership of every dynamic port. + Reading this object always return ready(1)." + ::= { vmVmps 4 } + +vmVmpsReconfirmResult OBJECT-TYPE + SYNTAX INTEGER { + other(1), + inProgress(2), + success(3), + noResponse(4), + noVmps(5), + noDynamicPort(6), + noHostConnected(7) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object returns the result of the last request + that sets vmVmpsReconfirm to execute(2). The + semantics of the possible results are as follows: + + other(1) - none of following + inProgress(2) - reconfirm in progress + success(3) - reconfirm completed successfully + noResponse(4) - reconfirm failed because no + VMPS responded + noVmps(5) - No VMPS configured + noDynamicPort(6) - No dynamic ports configured + noHostConnected(7) - No hosts on dynamic ports + " + ::= { vmVmps 5 } + +vmVmpsCurrent OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This is the IpAddress of the current VMPS used." + ::= { vmVmps 6 } + +vmVmpsTable OBJECT-TYPE + SYNTAX SEQUENCE OF VmVmpsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " A table of VMPS to use. The device will use + the the primary VMPS by default. If the + device is unable to reach the primary server + after vmVmpsRetries retries, it uses the first + secondary server in the table until it runs out + of secondary servers, in which case it will return + to using the primary server. Entries in this table + may be created and deleted via this MIB or + the management console on a device." + ::= { vmVmps 7 } + +vmVmpsEntry OBJECT-TYPE + SYNTAX VmVmpsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " An entry (conceptual row) in the vmVmpsTable." + INDEX { vmVmpsIpAddress } + ::= { vmVmpsTable 1 } + +VmVmpsEntry ::= SEQUENCE { + vmVmpsIpAddress IpAddress, + vmVmpsPrimary TruthValue, + vmVmpsRowStatus RowStatus +} + +vmVmpsIpAddress OBJECT-TYPE + SYNTAX IpAddress +-- MAX-ACCESS accessible-for-notify + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Ip Address of the VMPS." + ::= { vmVmpsEntry 1 } + +vmVmpsPrimary OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The status of the VMPS. Setting this value + to true will make this VMPS the primary server + and make the switch use this as the current server. + Setting this entry to true causes other rows + to transition to false. Attempting to write + a value of false after creation will result in + a return of bad value. Deleting an entry whose + value is true will result in the first entry + in the table being set to true." + ::= { vmVmpsEntry 2 } + +vmVmpsRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The status of this conceptual row." + ::= { vmVmpsEntry 3 } + +-- VLAN Membership Info +vmMembershipSummaryTable OBJECT-TYPE + SYNTAX SEQUENCE OF VmMembershipSummaryEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " A summary of VLAN membership of non-trunk + bridge ports. This is a convenience table + for retrieving VLAN membership information. + + A row is created for a VLAN if: + a) the VLAN exists, or + b) a port is assigned to a non-existent VLAN. + + VLAN membership can only be modified via the + vmMembershipTable." + ::= { vmMembership 1 } + +vmMembershipSummaryEntry OBJECT-TYPE + SYNTAX VmMembershipSummaryEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " An entry (conceptual row) in the + vmMembershipSummaryTable." + INDEX { vmMembershipSummaryVlanIndex} + ::= { vmMembershipSummaryTable 1 } + +VmMembershipSummaryEntry ::= SEQUENCE { + vmMembershipSummaryVlanIndex VlanIndex, + vmMembershipSummaryMemberPorts OCTET STRING +} + +vmMembershipSummaryVlanIndex OBJECT-TYPE + SYNTAX VlanIndex + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The VLAN id of the VLAN." + + ::= { vmMembershipSummaryEntry 1 } + +vmMembershipSummaryMemberPorts OBJECT-TYPE + SYNTAX OCTET STRING( SIZE(0..128) ) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The set of the device's member ports that belong + to the VLAN. + + Each octet within the value of this object specifies a + set of eight ports, with the first octet specifying ports + 1 through 8, the second octet specifying ports 9 + through 16, etc. Within each octet, the most + significant bit represents the lowest numbered + port, and the least significant bit represents the + highest numbered port. Thus, each port of the + VLAN is represented by a single bit within the + value of this object. If that bit has a value of + '1' then that port is included in the set of + ports; the port is not included if its bit has a + value of '0'. + + A port number is the value of dot1dBasePort for + the port in the BRIDGE-MIB (RFC 1493)." + + ::= { vmMembershipSummaryEntry 2 } + +vmMembershipTable OBJECT-TYPE + SYNTAX SEQUENCE OF VmMembershipEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " A table for configuring VLAN port membership. + There is one row for each bridge port that is + assigned to a static or dynamic access port. Trunk + ports are not represented in this table. An entry + may be created and deleted when ports are created or + deleted via SNMP or the management console on a device." + ::= { vmMembership 2 } + +vmMembershipEntry OBJECT-TYPE + SYNTAX VmMembershipEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " An entry (conceptual row) in the vmMembershipTable." + INDEX { ifIndex } + ::= { vmMembershipTable 1 } + +VmMembershipEntry ::= SEQUENCE { + vmVlanType INTEGER, + vmVlan INTEGER, + vmPortStatus INTEGER, + vmVlans OCTET STRING, + vmVlans2k OCTET STRING, + vmVlans3k OCTET STRING, + vmVlans4k OCTET STRING +} + +vmVlanType OBJECT-TYPE + SYNTAX INTEGER { + static(1), + dynamic(2), + multiVlan(3)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + " The type of VLAN membership assigned to this port. + A port with static vlan membership is assigned to a + single VLAN directly. A port with dynamic membership + is assigned a single VLAN based on content of packets + received on the port and via VQP queries to VMPS. + A port with multiVlan membership may be assigned to + one or more VLANs directly. + + A static or dynamic port membership is specified + by the value of vmVlan. A multiVlan port membership is + specified by the value of vmVlans." + ::= { vmMembershipEntry 1 } + +vmVlan OBJECT-TYPE + SYNTAX INTEGER(0..4095) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The VLAN id of the VLAN the port is assigned to + when vmVlanType is set to static or dynamic. + This object is not instantiated if not applicable. + + The value may be 0 if the port is not assigned + to a VLAN. + + If vmVlanType is static, the port is always + assigned to a VLAN and the object may not be + set to 0. + + If vmVlanType is dynamic the object's value is + 0 if the port is currently not assigned to a VLAN. + In addition, the object may be set to 0 only." + ::= { vmMembershipEntry 2 } + +vmPortStatus OBJECT-TYPE + SYNTAX INTEGER { + inactive(1), + active(2), + shutdown(3) } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " An indication of the current VLAN status of the port. + A status of inactive(1) indicates that a dynamic port + does not yet have a VLAN assigned, or a port is assigned + to a VLAN that is currently not active. A status of + active(2) indicates that the currently assigned + VLAN is active. A status of shutdown(3) indicates + that the port has been disabled as a result of VQP + shutdown response." + ::= { vmMembershipEntry 3 } + +vmVlans OBJECT-TYPE + SYNTAX OCTET STRING(SIZE(0..128)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The VLAN(s) the port is assigned to when the + port's vmVlanType is set to multiVlan. + This object is not instantiated if not applicable. + + The port is always assigned to one or more VLANs + and the object may not be set so that there are + no vlans assigned. + + Each octet within the value of this object specifies a + set of eight VLANs, with the first octet specifying + VLAN id 1 through 8, the second octet specifying VLAN + ids 9 through 16, etc. Within each octet, the most + significant bit represents the lowest numbered + VLAN id, and the least significant bit represents the + highest numbered VLAN id. Thus, each VLAN of the + port is represented by a single bit within the + value of this object. If that bit has a value of + '1' then that VLAN is included in the set of + VLANs; the VLAN is not included if its bit has a + value of '0'." + ::= { vmMembershipEntry 4 } + +vmVlans2k OBJECT-TYPE + SYNTAX OCTET STRING(SIZE(0..128)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The VLAN(s) the port is assigned to when the + port's vmVlanType is set to multiVlan. + This object is not instantiated if not applicable. + + The port is always assigned to one or more VLANs + and the object may not be set so that there are + no vlans assigned. + + Each octet within the value of this object specifies a + set of eight VLANs, with the first octet specifying + VLAN id 1024 through 1031, the second octet specifying VLAN + ids 1032 through 1039, etc. Within each octet, the most + significant bit represents the lowest numbered + VLAN id, and the least significant bit represents the + highest numbered VLAN id. Thus, each VLAN of the + port is represented by a single bit within the + value of this object. If that bit has a value of + '1' then that VLAN is included in the set of + VLANs; the VLAN is not included if its bit has a + value of '0'." + ::= { vmMembershipEntry 5 } + +vmVlans3k OBJECT-TYPE + SYNTAX OCTET STRING(SIZE(0..128)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The VLAN(s) the port is assigned to when the + port's vmVlanType is set to multiVlan. + This object is not instantiated if not applicable. + + The port is always assigned to one or more VLANs + and the object may not be set so that there are + no vlans assigned. + + Each octet within the value of this object specifies a + set of eight VLANs, with the first octet specifying + VLAN id 2048 through 2055, the second octet specifying VLAN + ids 2056 through 2063, etc. Within each octet, the most + significant bit represents the lowest numbered + VLAN id, and the least significant bit represents the + highest numbered VLAN id. Thus, each VLAN of the + port is represented by a single bit within the + value of this object. If that bit has a value of + '1' then that VLAN is included in the set of + VLANs; the VLAN is not included if its bit has a + value of '0'." + ::= { vmMembershipEntry 6 } + +vmVlans4k OBJECT-TYPE + SYNTAX OCTET STRING(SIZE(0..128)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The VLAN(s) the port is assigned to when the + port's vmVlanType is set to multiVlan. + This object is not instantiated if not applicable. + + The port is always assigned to one or more VLANs + and the object may not be set so that there are + no vlans assigned. + + Each octet within the value of this object specifies a + set of eight VLANs, with the first octet specifying + VLAN id 3072 through 3079, the second octet specifying VLAN + ids 3040 through 3047, etc. Within each octet, the most + significant bit represents the lowest numbered + VLAN id, and the least significant bit represents the + highest numbered VLAN id. Thus, each VLAN of the + port is represented by a single bit within the + value of this object. If that bit has a value of + '1' then that VLAN is included in the set of + VLANs; the VLAN is not included if its bit has a + value of '0'." + ::= { vmMembershipEntry 7 } + +-- VQP Statistics +vmVQPQueries OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " The total number of VQP requests sent by this device to + all VMPS since last system re-initialization." + ::= { vmStatistics 1 } + +vmVQPResponses OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " The number of VQP responses received by this device from + all VMPS since last system re-initialization." + ::= { vmStatistics 2 } + +vmVmpsChanges OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " The number of times, since last system re-initialization, + the current VMPS was changed. The current VMPS is changed + whenever the VMPS fails to response after vmVmpsRetries of + a VQP request." + ::= { vmStatistics 3 } + +vmVQPShutdown OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " The number of times, since last system re-initialization, + a VQP response indicates 'shutdown'. A 'shutdown' response + is a result of the membership policy configured at a VMPS + by the administrator." + ::= { vmStatistics 4 } + +vmVQPDenied OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " The number of times, since last system re-initialization, + a VQP response indicates 'denied'. A 'denied' response + is a result of the membership policy configured at a VMPS + by the administrator." + ::= { vmStatistics 5 } + +vmVQPWrongDomain OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " The number of times, since last system re-initialization, + a VQP response indicates wrong management domain. + A wrong management domain response indicates that the + VMPS used serves a management domain that is different + from the device's management domain." + ::= { vmStatistics 6 } + +vmVQPWrongVersion OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " The number of times, since last system re-initialization, + a VQP response indicates wrong VQP version. + A wrong VQP version response indicates that the VMPS + used supports a VQP version that is different from + the device's VQP version." + ::= { vmStatistics 7 } + +vmInsufficientResources OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " The number of times, since last system re-initialization, + a VQP response indicates insufficient resources. An + insufficient resources response indicates that the VMPS + used does not have the required resources to verify the + membership assignment requested." + ::= { vmStatistics 8 } + +-- Status + +vmNotificationsEnabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "An indication of whether the notifications/traps + defined in this MIB are enabled." + ::= { vmStatus 1 } + +-- Notifications +vmNotifications + OBJECT IDENTIFIER ::= { ciscoVlanMembershipMIB 2 } + +vmNotificationsPrefix + OBJECT IDENTIFIER ::= { vmNotifications 0 } + +vmVmpsChange NOTIFICATION-TYPE + OBJECTS { vmVmpsIpAddress} + STATUS current + DESCRIPTION + " A VMPS change notification is generated whenever + vmVmpsChanges is incremented. The IP address + of the new VMPS is sent." + ::= { vmNotificationsPrefix 1 } + +-- Conformance + +vmMIBConformance + OBJECT IDENTIFIER ::= { ciscoVlanMembershipMIB 3 } + +vmMIBCompliances + OBJECT IDENTIFIER ::= { vmMIBConformance 1 } + +vmMIBGroups + OBJECT IDENTIFIER ::= { vmMIBConformance 2 } + +vmMIBCompliance MODULE-COMPLIANCE + STATUS obsolete -- superseded by vmMIBComplianceR2 + DESCRIPTION + " The compliance statement for entities which + implement the VLANs." + MODULE + MANDATORY-GROUPS { vmMembershipGroup } + + GROUP vmVQPClientGroup + DESCRIPTION + " A VQP client must implement this group." + +-- GROUP vmVQPNotificationsGroup +-- DESCRIPTION +-- " A VQP client must implement this group." + ::= { vmMIBCompliances 1 } + +vmMIBCompliance2 MODULE-COMPLIANCE + STATUS deprecated + DESCRIPTION + " The compliance statement for entities which + implement the VLANs." + MODULE + MANDATORY-GROUPS { vmMembershipGroup2 } + + GROUP vmVQPClientGroup + DESCRIPTION + " A VQP client must implement this group." + +-- GROUP vmVQPNotificationsGroup +-- DESCRIPTION +-- " A VQP client must implement this group." + ::= { vmMIBCompliances 2 } + +vmMIBCompliance3 MODULE-COMPLIANCE + STATUS current + DESCRIPTION + " The compliance statement for entities which + implement the VLANs." + MODULE + MANDATORY-GROUPS { vmMembershipGroup2 } + + GROUP vmVQPClientGroup + DESCRIPTION + " A VQP client must implement this group." + +-- GROUP vmVQPNotificationsGroup +-- DESCRIPTION +-- " A VQP client must implement this group." + + GROUP vm4kVlanGroup + DESCRIPTION + " This group must be implemented by the + enitities which support the range of VlanIndex + between 1024 and 4095." + + ::= { vmMIBCompliances 3 } + +-- Units of Conformance + +vmMembershipGroup OBJECT-GROUP + OBJECTS { vmMembershipSummaryMemberPorts, + vmVlan, vmVlanType, vmPortStatus } + STATUS deprecated + DESCRIPTION + " A collection of objects for displaying and + configuring VLAN membership." + ::= { vmMIBGroups 1 } + +vmVQPClientGroup OBJECT-GROUP + OBJECTS { vmVmpsVQPVersion, vmVmpsRetries, vmVmpsReconfirm, + vmVmpsReconfirmInterval, vmVmpsReconfirmResult, + vmVmpsCurrent, vmVmpsIpAddress, vmVmpsPrimary, + vmVmpsRowStatus, vmVQPQueries, vmVQPResponses, + vmVmpsChanges, vmVQPShutdown, vmVQPDenied, + vmVQPWrongDomain, vmVQPWrongVersion, + vmInsufficientResources } + STATUS current + DESCRIPTION + " A collection of objects for the managing a VQP + client." + ::= { vmMIBGroups 2 } + +--vmVQPNotificationsGroup NOTIFICATION-GROUP +-- NOTIFICATIONS { vmVmpsChange } +-- STATUS current +-- DESCRIPTION +-- " The notification group for a VQP client. " +-- ::= { vmMIBGroups 3 } + +vmStatusGroup OBJECT-GROUP + OBJECTS { vmNotificationsEnabled } + STATUS current + DESCRIPTION + " A collection of objects for conveying general + status information." + ::= { vmMIBGroups 4 } + +vmMembershipGroup2 OBJECT-GROUP + OBJECTS { vmMembershipSummaryMemberPorts, + vmVlan, vmVlans, vmVlanType, vmPortStatus } + STATUS current + DESCRIPTION + " A collection of objects for displaying and + configuring VLAN membership." + ::= { vmMIBGroups 5 } + +vm4kVlanGroup OBJECT-GROUP + OBJECTS { vmVlans2k, vmVlans3k, vmVlans4k } + STATUS current + DESCRIPTION + "A collection of objects providing information + for VLANS with VlanIndex from 1024 to 4095." + ::= { vmMIBGroups 6 } + +END