diff --git a/includes/discovery/temperatures/hpilo.inc.php b/includes/discovery/temperatures/hpilo.inc.php
new file mode 100644
index 0000000000..775ef1f7c0
--- /dev/null
+++ b/includes/discovery/temperatures/hpilo.inc.php
@@ -0,0 +1,27 @@
+<?php
+
+  echo("HP_ILO ");
+  $oids = snmp_walk($device,"1.3.6.1.4.1.232.6.2.6.8.1.2.1","-Osqn","");
+  $oids = trim($oids);
+  foreach (explode("\n", $oids) as $data)
+  {
+    $data = trim($data);
+    if ($data != "")
+    {
+      list($oid) = explode(" ", $data);
+      $split_oid        = explode('.',$oid);
+      $temperature_id   = $split_oid[count($split_oid)-2].".".$split_oid[count($split_oid)-1];
+
+      $descr_oid = "1.3.6.1.4.1.232.6.2.6.8.1.3.$temperature_id";
+      $descr = snmp_get($device,$descr_oid,"-Oqnv","CPQHLTH-MIB");
+
+      $temperature_oid  = "1.3.6.1.4.1.232.6.2.6.8.1.4.$temperature_id";
+      $temperature = snmp_get($device,$temperature_oid,"-Oqv","");
+
+      $threshold_oid = "1.3.6.1.4.1.232.6.2.6.8.1.5.$temperature_id";
+      $threshold = snmp_get($device,$threshold_oid,"-Oqv","");
+
+      discover_sensor($valid['sensor'], 'temperature', $device, $temperature_oid, $oid, 'hpilo', $descr, '2', '1', NULL, NULL, NULL, $threshold, $temperature);
+    }
+  }
+
diff --git a/mibs/CPQHLTH-MIB b/mibs/CPQHLTH-MIB
new file mode 100644
index 0000000000..14e815efa5
--- /dev/null
+++ b/mibs/CPQHLTH-MIB
@@ -0,0 +1,5781 @@
+-- ****************************************************************************
+--
+--                         Server Health Features
+--         Management Information Base for SNMP Network Management
+--
+--
+--      Copyright 1992,2008 Hewlett-Packard Development Company, L.P.
+--
+--      Hewlett-Packard Company shall not be liable for technical or
+--      editorial errors or omissions contained herein. The information in
+--      this document is provided "as is" without warranty of any kind and
+--      is subject to change without notice. The warranties for HP products
+--      are set forth in the express limited warranty statements
+--      accompanying such products. Nothing herein should be construed as
+--      constituting an additional warranty.
+--
+--      Confidential computer software. Valid license from HP required for
+--      possession, use or copying. Consistent with FAR 12.211 and 12.212,
+--      Commercial Computer Software, Computer Software Documentation, and
+--      Technical Data for Commercial Items are licensed to the U.S.
+--      Government under vendor's standard commercial license.
+--
+--      Refer to the READMIB.RDM file for more information about the
+--      organization of the information in the Compaq Enterprise.
+--
+--      The Compaq Enterprise number is 232.
+--      The ASN.1 prefix to, and including the Compaq Enterprise is:
+--           1.3.6.1.4.1.232
+--
+-- ****************************************************************************
+
+CPQHLTH-MIB DEFINITIONS ::= BEGIN
+
+    IMPORTS
+        compaq                  FROM CPQHOST-MIB
+        enterprises             FROM RFC1155-SMI
+        Counter                 FROM RFC1155-SMI
+        DisplayString           FROM RFC1213-MIB
+        OBJECT-TYPE             FROM RFC-1212
+        TRAP-TYPE               FROM RFC-1215
+        sysName                 FROM RFC1213-MIB
+        cpqHoTrapFlags          FROM CPQHOST-MIB
+        cpqSiServerSystemId     FROM CPQSINFO-MIB
+        cpqSiMemModuleSize      FROM CPQSINFO-MIB;
+
+--  compaq                  OBJECT IDENTIFIER ::= { enterprises 232 }
+    cpqHealth               OBJECT IDENTIFIER ::= { compaq 6 }
+    cpqHeMibRev             OBJECT IDENTIFIER ::= { cpqHealth 1 }
+    cpqHeComponent          OBJECT IDENTIFIER ::= { cpqHealth 2 }
+    cpqHeTrap               OBJECT IDENTIFIER ::= { cpqHealth 3 }
+
+    cpqHeInterface          OBJECT IDENTIFIER ::= { cpqHeComponent 1 }
+    cpqHeCriticalError      OBJECT IDENTIFIER ::= { cpqHeComponent 2 }
+    cpqHeCorrectableMemory  OBJECT IDENTIFIER ::= { cpqHeComponent 3 }
+    cpqHeAsr                OBJECT IDENTIFIER ::= { cpqHeComponent 5 }
+    cpqHeThermal            OBJECT IDENTIFIER ::= { cpqHeComponent 6 }
+    cpqHePostMsg            OBJECT IDENTIFIER ::= { cpqHeComponent 7 }
+    cpqHeSysUtil            OBJECT IDENTIFIER ::= { cpqHeComponent 8 }
+    cpqHeFltTolPwrSupply    OBJECT IDENTIFIER ::= { cpqHeComponent 9 }
+    cpqHeIRC                OBJECT IDENTIFIER ::= { cpqHeComponent 10 }
+    cpqHeEventLog           OBJECT IDENTIFIER ::= { cpqHeComponent 11 }
+    cpqHeMgmtDisplay        OBJECT IDENTIFIER ::= { cpqHeComponent 12 }
+    cpqHePowerConverter     OBJECT IDENTIFIER ::= { cpqHeComponent 13 }
+    cpqHeResilientMemory    OBJECT IDENTIFIER ::= { cpqHeComponent 14 }
+    cpqHePowerMeter         OBJECT IDENTIFIER ::= { cpqHeComponent 15 }
+
+    cpqHeOsNetWare3x        OBJECT IDENTIFIER ::= { cpqHeInterface 1 }
+    cpqHeOsCommon           OBJECT IDENTIFIER ::= { cpqHeInterface 4 }
+
+-- ****************************************************************************
+--   Health MIB Revision
+--   ===================
+--
+-- The compaq enterprise               (1.3.6.1.4.1.232)
+--      cpqHealth Group                (1.3.6.1.4.1.232.6)
+--       cpqHeMibRev Group             (1.3.6.1.4.1.232.6.1)
+--
+--     An Insight Agent conforming to this document will return a
+--     cpqHeMibRevMajor of one (1) and a cpqHeMibRevMinor of twenty-five (25).
+--
+--
+--    Implementation of the MibRev group is mandatory for all agents
+--    supporting the Server Health MIB.
+--
+-- ****************************************************************************
+
+    cpqHeMibRevMajor OBJECT-TYPE
+        SYNTAX  INTEGER (1..65535)
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "The Major Revision level of the MIB.
+
+            A change in the major revision level represents a major change
+            in the architecture of the MIB.  A change in the major revision
+            level may indicate a significant change in the information
+            supported and/or the meaning of the supported information,
+            correct interpretation of data may require a MIB document with
+            the same major revision level."
+        ::= { cpqHeMibRev 1 }
+
+    cpqHeMibRevMinor OBJECT-TYPE
+        SYNTAX  INTEGER (0..65535)
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "The minor revision level of the MIB.
+
+            A change in the minor revision level may represent some minor
+            additional support, no changes to any pre-existing information
+            has occurred."
+        ::= { cpqHeMibRev 2 }
+
+    cpqHeMibCondition OBJECT-TYPE
+        SYNTAX  INTEGER {
+            other(1),
+            ok(2),              -- default
+            degraded(3),
+            failed(4)
+            }
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "The overall condition.
+
+             This object represents the overall status of the server health
+             system represented by this MIB."
+        ::= { cpqHeMibRev 3 }
+
+-- ****************************************************************************
+--   Health MIB NetWare OS Group
+--   ===========================
+--
+-- The compaq enterprise               (1.3.6.1.4.1.232)
+--      cpqHealth Group                (1.3.6.1.4.1.232.6)
+--       cpqHeComponent Group          (1.3.6.1.4.1.232.6.2)
+--        cpqHeInterface Group         (1.3.6.1.4.1.232.6.2.1)
+--         cpqHeOsNetWare3x Group      (1.3.6.1.4.1.232.6.2.1.1)
+--
+--  Implementation of the cpqHeOsNetWare3x group is mandatory for all
+--  agents that support the Server Health MIB in a NetWare host
+--  operating environment.
+--
+-- ****************************************************************************
+
+    cpqHeNw3xDriverName OBJECT-TYPE
+        SYNTAX  DisplayString (SIZE (0..255))
+        ACCESS  read-only
+        STATUS  deprecated
+        DESCRIPTION
+            "Driver Name.
+
+            This value identifies the NetWare Loadable Module providing the
+            operating system access to the Server Health information."
+        ::= { cpqHeOsNetWare3x 1 }
+
+    cpqHeNw3xDriverDate OBJECT-TYPE
+        SYNTAX  DisplayString (SIZE (8))
+        ACCESS  read-only
+        STATUS  deprecated
+        DESCRIPTION
+            "Driver Date.
+
+            The date of the NetWare Loadable Module providing the operating
+            system access to the Server Health logs.  The date is
+            provided in mm/dd/yy format."
+        ::= { cpqHeOsNetWare3x 2 }
+
+    cpqHeNw3xDriverVersion OBJECT-TYPE
+        SYNTAX  DisplayString (SIZE (0..5))
+        ACCESS  read-only
+        STATUS  deprecated
+        DESCRIPTION
+            "Driver Version.
+
+            This is the version of the NetWare Loadable Module (NLM)
+            providing the operating system access to the Server
+            Health logs."
+        ::= { cpqHeOsNetWare3x 3 }
+
+-- ****************************************************************************
+--   Health MIB OS Common Group
+--   ==========================
+--
+-- The compaq enterprise               (1.3.6.1.4.1.232)
+--      cpqHealth Group                (1.3.6.1.4.1.232.6)
+--       cpqHeComponent Group          (1.3.6.1.4.1.232.6.2)
+--        cpqHeInterface Group         (1.3.6.1.4.1.232.6.2.1)
+--         cpqHeOsCommon Group         (1.3.6.1.4.1.232.6.2.1.4)
+--
+--  The cpqHeOsCommon group describes the interface to the Server
+--  health components.  This information describes the interface modules
+--  and general OS interface architectural information.
+--
+--  Implementation of the cpqHeOsCommon group is mandatory for all
+--  agents that support the Server Health MIB.
+--
+-- ****************************************************************************
+
+    cpqHeOsCommonPollFreq OBJECT-TYPE
+        SYNTAX  INTEGER (0..65535)
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+            "The Insight Agent's polling frequency.
+
+            The frequency, in seconds, at which the Insight Agent requests
+            information from the device driver.  A frequency of zero
+            indicates that the Insight Agent retrieves the information upon
+            request of a management station, it does not poll the device
+            driver at a specific interval.
+
+            If the poll frequency is 0 all attempts to write to this
+            object will fail.  If the poll frequency is non-zero,
+            setting this value will change the polling frequency of the
+            Insight Agent.  Setting the poll frequency to zero will always
+            fail, an agent may also choose to fail any request to change
+            the poll frequency to a value that would severely impact system
+            performance."
+        ::= { cpqHeOsCommon 1 }
+
+-- ****************************************************************************
+--   Health MIB OS Common Module Table
+--   =================================
+--
+-- The compaq enterprise               (1.3.6.1.4.1.232)
+--      cpqHealth Group                (1.3.6.1.4.1.232.6)
+--       cpqHeComponent Group          (1.3.6.1.4.1.232.6.2)
+--        cpqHeInterface Group         (1.3.6.1.4.1.232.6.2.1)
+--         cpqHeOsCommon Group         (1.3.6.1.4.1.232.6.2.1.4)
+--           cpqHeOsCommonModuleTable  (1.3.6.1.4.1.232.6.2.1.4.2) deprecated
+--
+-- ****************************************************************************
+
+    cpqHeOsCommonModuleTable OBJECT-TYPE
+        SYNTAX  SEQUENCE OF CpqHeOsCommonModuleEntry
+        ACCESS  not-accessible
+        STATUS  deprecated
+        DESCRIPTION
+            "Supporting software table.
+
+             This is a table of software modules that provide an interface
+             to the device this server health MIB describes."
+        ::= { cpqHeOsCommon 2 }
+
+    cpqHeOsCommonModuleEntry OBJECT-TYPE
+        SYNTAX  CpqHeOsCommonModuleEntry
+        ACCESS  not-accessible
+        STATUS  deprecated
+        DESCRIPTION
+            "A description of a software modules that provide an interface
+            to the device this MIB describes."
+        INDEX   { cpqHeOsCommonModuleIndex }
+        ::= { cpqHeOsCommonModuleTable 1 }
+
+        CpqHeOsCommonModuleEntry ::= SEQUENCE {
+            cpqHeOsCommonModuleIndex       INTEGER,
+            cpqHeOsCommonModuleName        DisplayString,
+            cpqHeOsCommonModuleVersion     DisplayString,
+            cpqHeOsCommonModuleDate        OCTET STRING,
+            cpqHeOsCommonModulePurpose     DisplayString
+        }
+
+    cpqHeOsCommonModuleIndex OBJECT-TYPE
+        SYNTAX  INTEGER (0..255)
+        ACCESS  read-only
+        STATUS  deprecated
+        DESCRIPTION
+            "A unique index for this module description."
+        ::= { cpqHeOsCommonModuleEntry 1 }
+
+    cpqHeOsCommonModuleName OBJECT-TYPE
+        SYNTAX  DisplayString (SIZE (0..255))
+        ACCESS  read-only
+        STATUS  deprecated
+        DESCRIPTION
+            "The module name."
+        ::= { cpqHeOsCommonModuleEntry 2 }
+
+    cpqHeOsCommonModuleVersion OBJECT-TYPE
+        SYNTAX  DisplayString (SIZE (0..5))
+        ACCESS  read-only
+        STATUS  deprecated
+        DESCRIPTION
+            "The module version in XX.YY format.
+
+            Where XX is the major version number and YY is the minor version
+            number.  This field will be null (size 0) string if the agent
+            cannot provide the module version."
+        ::= { cpqHeOsCommonModuleEntry 3 }
+
+    cpqHeOsCommonModuleDate OBJECT-TYPE
+        SYNTAX  OCTET STRING (SIZE (7))
+        ACCESS  read-only
+        STATUS  deprecated
+        DESCRIPTION
+            "The module date.
+
+             field  octets  contents                  range
+             =====  ======  =======                  =====
+               1      1-2   year                      0..65536
+               2       3    month                     1..12
+               3       4    day                       1..31
+               4       5    hour                      0..23
+               5       6    minute                    0..59
+               6       7    second                    0..60
+                            (use 60 for leap-second)
+
+
+            This field will be set to year = 0 if the agent cannot provide
+            the module date.  The hour, minute, and second field will be set
+            to zero (0) if they are not relevant.  The year field is set
+            with the most significant octet first."
+        ::= { cpqHeOsCommonModuleEntry 4 }
+
+    cpqHeOsCommonModulePurpose OBJECT-TYPE
+        SYNTAX  DisplayString (SIZE (0..255))
+        ACCESS  read-only
+        STATUS  deprecated
+        DESCRIPTION
+            "The purpose of the module described in this entry."
+        ::= { cpqHeOsCommonModuleEntry 5 }
+
+-- ****************************************************************************
+--   Health MIB Critical Error Group
+--   ===============================
+--
+-- The compaq enterprise               (1.3.6.1.4.1.232)
+--      cpqHealth Group                (1.3.6.1.4.1.232.6)
+--       cpqHeComponent Group          (1.3.6.1.4.1.232.6.2)
+--        cpqHeCriticalError Group     (1.3.6.1.4.1.232.6.2.2)
+--
+--  The cpqHeCriticalError group describes the health critical error log.
+--
+--  Implementation of the cpqHeCriticalError group is mandatory for all
+--  agents that support the Server Health MIB.
+--
+-- ****************************************************************************
+
+    cpqHeCritLogSupported OBJECT-TYPE
+        SYNTAX  INTEGER {
+            other(1),
+            notSupported(2),
+            supported(3)
+            }
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "This value specifies if this system supports the critical
+            error logging feature."
+        ::= { cpqHeCriticalError 1 }
+
+    cpqHeCritLogCondition OBJECT-TYPE
+        SYNTAX  INTEGER {
+            other(1),
+            ok(2),
+            degraded(3),
+            failed(4)
+            }
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "This value specifies the overall condition of the critical
+            error log feature."
+        ::= { cpqHeCriticalError 2 }
+
+    cpqHeLastCritErrorAbendMsg OBJECT-TYPE
+        SYNTAX  DisplayString (SIZE (0..255))
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "Last Critical Termination message.
+
+             The message associated with the last critical error of
+             type criticalException(14) or abend(27)."
+        ::= { cpqHeCriticalError 3 }
+
+-- ****************************************************************************
+--   Health MIB Critical Error Table
+--   ===============================
+--
+-- The compaq enterprise               (1.3.6.1.4.1.232)
+--      cpqHealth Group                (1.3.6.1.4.1.232.6)
+--       cpqHeComponent Group          (1.3.6.1.4.1.232.6.2)
+--        cpqHeCriticalError Group     (1.3.6.1.4.1.232.6.2.2)
+--         cpqHeCriticalErrorTable     (1.3.6.1.4.1.232.6.2.2.4)
+--
+-- ****************************************************************************
+
+    cpqHeCriticalErrorTable OBJECT-TYPE
+        SYNTAX  SEQUENCE OF CpqHeCriticalErrorEntry
+        ACCESS  not-accessible
+        STATUS  mandatory
+        DESCRIPTION
+            "A table of critical error descriptions."
+        ::= { cpqHeCriticalError 4 }
+
+    cpqHeCriticalErrorEntry OBJECT-TYPE
+        SYNTAX  CpqHeCriticalErrorEntry
+        ACCESS  not-accessible
+        STATUS  mandatory
+        DESCRIPTION
+            "A critical error description."
+        INDEX   { cpqHeCriticalErrorIndex }
+        ::= { cpqHeCriticalErrorTable 1 }
+
+    CpqHeCriticalErrorEntry ::= SEQUENCE {
+        cpqHeCriticalErrorIndex          INTEGER,
+        cpqHeCriticalErrorStatus         INTEGER,
+        cpqHeCriticalErrorType           INTEGER,
+        cpqHeCriticalErrorTime           OCTET STRING,
+        cpqHeCriticalErrorInfo           OCTET STRING,
+        cpqHeCriticalErrorDesc           DisplayString
+    }
+
+    cpqHeCriticalErrorIndex OBJECT-TYPE
+        SYNTAX  INTEGER (0..65535)
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "A number that uniquely specifies this critical error 
+            description.  The entries will be in order of occurrence
+            with the most recent entry first."
+        ::= { cpqHeCriticalErrorEntry 1 }
+
+    cpqHeCriticalErrorStatus OBJECT-TYPE
+        SYNTAX  INTEGER {
+            uncorrected(1),
+            corrected(2)
+            }
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+            "This value specifies if the user has marked this error as
+            corrected.  Marking errors as corrected may be performed with
+            the Diagnostics or by a set operation on this variable.
+            Attempting to set this variable to uncorrected(1) will fail."
+        ::= { cpqHeCriticalErrorEntry 2 }
+
+    cpqHeCriticalErrorType OBJECT-TYPE
+        SYNTAX  INTEGER {
+            other(1),
+            empty(2),
+            nonCorrectableMemErr(3),
+            busMasterTimeoutNmi(4),
+            commandBusTimeoutNmi(5),
+            ioCheckNmi(6),
+            refreshOverflowNmi(7),
+            cacheParityNmi(8),
+            processorParityNmi(9),
+            eisaHostMemReadHit(10),
+            processorFailure(11),
+            cautionTemperature(12),
+            postCriticalError(13),
+            criticalException(14),
+            serverManagerIfFail(15),
+            pentiumIperr(16),
+            pentiumAperr(17),
+            pentiumIeerr(18),
+            pentiumApcheck(19),
+            cpuLocalError(20),
+            failsafeTimer(21),
+            softwareNmi(22),
+            asrBaseMemoryParity(23),
+            asrExtendedMemParity(24),
+            asrResetLimit(25),
+            asrMemoryParity(26),
+            abend(27),
+            asrTestEvent(28),
+            asrTimeoutNmi(29),
+            fanFailure(30),
+            upsDetectedLineFail(31),
+            asrDetectedAtBoot(32),
+            redunPowerSupplyFailure(33),
+            pciBusParityError(34),
+            diagnosticError(35),
+            rtcChipBatteryFailure(36),
+            pentiumBerr(37),
+            dcConverterFailure(38),
+            cpuInternalThreshPassed(39)
+            }
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "This value specifies the type of error."
+        ::= { cpqHeCriticalErrorEntry 3 }
+
+    cpqHeCriticalErrorTime OBJECT-TYPE
+        SYNTAX  OCTET STRING (SIZE (0..3))
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "The time of the error: hour (first five bits), day of month
+            (next 5 bits), month (next 4 bits), year of the current century
+            (next 7 bits).  The last 3 bits are reserved."
+        ::= { cpqHeCriticalErrorEntry 4 }
+
+    cpqHeCriticalErrorInfo OBJECT-TYPE
+        SYNTAX  OCTET STRING (SIZE (0..4))
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "Information about the error."
+        ::= { cpqHeCriticalErrorEntry 5 }
+
+    cpqHeCriticalErrorDesc OBJECT-TYPE
+        SYNTAX  DisplayString (SIZE (0..255))
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "A text description of the critical error."
+        ::= { cpqHeCriticalErrorEntry 6 }
+
+-- ****************************************************************************
+--   Health MIB Correctable Memory Error Group
+--   =========================================
+--
+-- The compaq enterprise               (1.3.6.1.4.1.232)
+--      cpqHealth Group                (1.3.6.1.4.1.232.6)
+--       cpqHeComponent Group          (1.3.6.1.4.1.232.6.2)
+--        cpqHeCorrectableMemory Group (1.3.6.1.4.1.232.6.2.3)
+--
+--  The cpqHeCorrectableMemory group describes the health correctable memory
+--  error log.
+--
+--  Implementation of the cpqHeCorrectableMemory group is mandatory for all
+--  agents that support the Server Health MIB on a system that has the
+--  correctable memory feature.
+--
+-- ****************************************************************************
+
+    cpqHeCorrMemLogStatus OBJECT-TYPE
+        SYNTAX  INTEGER {
+            other(1),
+            notSupported(2),
+            disabled(3),
+            enabled(4)
+            }
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "This value specifies whether this system is currently tracking
+            correctable memory errors."
+        ::= { cpqHeCorrectableMemory 1 }
+
+    cpqHeCorrMemLogCondition OBJECT-TYPE
+        SYNTAX  INTEGER {
+            other(1),
+            ok(2),
+            degraded(3),
+            failed(4)
+            }
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "This value specifies the overall condition of the correctable
+            memory error log feature."
+        ::= { cpqHeCorrectableMemory 2 }
+
+    cpqHeCorrMemTotalErrs OBJECT-TYPE
+        SYNTAX  INTEGER (0..2147483647)
+        ACCESS  read-only
+        STATUS  deprecated
+        DESCRIPTION
+            "The number of correctable memory errors that have occurred."
+        ::= { cpqHeCorrectableMemory 3 }
+
+-- ****************************************************************************
+--   Health MIB Correctable Memory Error Table
+--   =========================================
+--
+-- The compaq enterprise               (1.3.6.1.4.1.232)
+--      cpqHealth Group                (1.3.6.1.4.1.232.6)
+--       cpqHeComponent Group          (1.3.6.1.4.1.232.6.2)
+--        cpqHeCorrectableMemory Group (1.3.6.1.4.1.232.6.2.3)
+--         cpqHeCorrMemErrTable        (1.3.6.1.4.1.232.6.2.3.4)
+--
+-- ****************************************************************************
+
+    cpqHeCorrMemErrTable OBJECT-TYPE
+        SYNTAX  SEQUENCE OF CpqHeCorrMemErrEntry
+        ACCESS  not-accessible
+        STATUS  mandatory
+        DESCRIPTION
+            "A table of correctable memory error descriptions."
+        ::= { cpqHeCorrectableMemory 4 }
+
+    cpqHeCorrMemErrEntry OBJECT-TYPE
+        SYNTAX  CpqHeCorrMemErrEntry
+        ACCESS  not-accessible
+        STATUS  mandatory
+        DESCRIPTION
+            "A correctable memory error description."
+        INDEX   { cpqHeCorrMemErrIndex }
+        ::= { cpqHeCorrMemErrTable 1 }
+
+    CpqHeCorrMemErrEntry ::= SEQUENCE {
+        cpqHeCorrMemErrIndex       INTEGER,
+        cpqHeCorrMemErrCount       INTEGER,
+        cpqHeCorrMemErrTime        OCTET STRING,
+        cpqHeCorrMemErrDdr         OCTET STRING,
+        cpqHeCorrMemErrSyndrome    OCTET STRING,
+        cpqHeCorrMemErrDesc        DisplayString,
+        cpqHeCorrMemErrHwLocation  DisplayString
+    }
+
+    cpqHeCorrMemErrIndex OBJECT-TYPE
+        SYNTAX  INTEGER (0..65535)
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "A number that uniquely specifies this correctable memory error
+            description.  The entries will be in order of occurrence with the
+            most recent new entry first."
+        ::= { cpqHeCorrMemErrEntry 1 }
+
+    cpqHeCorrMemErrCount OBJECT-TYPE
+        SYNTAX  INTEGER (0..255)
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+            "The number of times this memory location has had a correctable
+            memory error.  The value zero (0) indicates that the user has
+            marked this error as corrected.  Marking errors as corrected may
+            be performed with the Diagnostics or with a set operation
+            of 0 on this variable.  Any non-zero valued set operation will
+            fail."
+        ::= { cpqHeCorrMemErrEntry 2 }
+
+    cpqHeCorrMemErrTime OBJECT-TYPE
+        SYNTAX  OCTET STRING (SIZE (0..3))
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "The time of the error: hour (first five bits), day of month
+            (next 5 bits), month (next 4 bits), year of the current century
+            (next 7 bits).  The last 3 bits are reserved."
+        ::= { cpqHeCorrMemErrEntry 3 }
+
+    cpqHeCorrMemErrDdr OBJECT-TYPE
+        SYNTAX  OCTET STRING (SIZE (0..2))
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "The data destination register value.
+
+            This contains information about the memory bank in which the
+            error occurred.  The interpretation of this value is dependent
+            on the machine type."
+        ::= { cpqHeCorrMemErrEntry 4 }
+
+    cpqHeCorrMemErrSyndrome OBJECT-TYPE
+        SYNTAX  OCTET STRING (SIZE (0..2))
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "The memory syndrome value.
+
+            This contains information about the memory module in which the
+            error occurred.  The interpretation of this value is dependant
+            on the machine type."
+        ::= { cpqHeCorrMemErrEntry 5 }
+
+    cpqHeCorrMemErrDesc OBJECT-TYPE
+        SYNTAX  DisplayString (SIZE (0..255))
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "A text description of the correctable memory error."
+        ::= { cpqHeCorrMemErrEntry 6 }
+
+    cpqHeCorrMemErrHwLocation  OBJECT-TYPE
+        SYNTAX  DisplayString (SIZE (0..255))
+        ACCESS  read-only
+        STATUS  optional
+        DESCRIPTION
+            "A text description of the hardware location, on complex
+             multi SBB hardware only, for the correctable memory error.
+             A NULL string indicates that the hardware location could not
+             be determined or is irrelevant."
+        ::= { cpqHeCorrMemErrEntry 7 }
+
+    cpqHeCorrMemErrorCntThresh OBJECT-TYPE
+        SYNTAX  INTEGER (0..2147483647)
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "The error threshold for Correctable memory errors. When
+            cpqHeCorrMemErrCount is greater than or equal to this value
+            user action is required to replace the failing memory module."
+        ::= { cpqHeCorrectableMemory 5 }
+
+-- ****************************************************************************
+--   Health MIB Automatic Server Recovery (ASR) Group
+--   ================================================
+--
+-- The compaq enterprise               (1.3.6.1.4.1.232)
+--      cpqHealth Group                (1.3.6.1.4.1.232.6)
+--       cpqHeComponent Group          (1.3.6.1.4.1.232.6.2)
+--        cpqHeAsr Group               (1.3.6.1.4.1.232.6.2.5)
+--
+--  The cpqHeAsr group describes the Automatic Server Recovery Health
+--  feature.
+--
+--  Implementation of the cpqHeAsr group is mandatory for all agents that
+--  support the Server Health MIB on a system that supports the ASR feature.
+--
+-- ****************************************************************************
+
+    cpqHeAsrStatus OBJECT-TYPE
+        SYNTAX  INTEGER {
+            other(1),
+            notAvailable(2),
+            disabled(3),
+            enabled(4)
+            }
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+            "The Automatic Server Recovery feature status.
+
+            If this object is currently other(1) or notAvailable(2) all
+            set operations will fail.  Any attempt to set this object to
+            other(1) or notAvailable(2) by a management station will fail.
+
+            Setting this object to disabled(3) or enabled(4) will disable
+            or enable the ASR feature.
+
+            Setting this object to disabled(3) will disable the following
+            objects:
+                cpqHeAsrPagerStatus
+                cpqHeAsrDialInStatus
+                cpqHeAsrDialOutStatus"
+        ::= { cpqHeAsr 1 }
+
+    cpqHeAsrMajorVersion OBJECT-TYPE
+        SYNTAX  INTEGER (0..255)
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "The major version number of the Automatic Server Recovery
+            feature hardware."
+        ::= { cpqHeAsr 2 }
+
+    cpqHeAsrMinorVersion OBJECT-TYPE
+        SYNTAX  INTEGER (0..255)
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "The minor version number of the Automatic Server Recovery
+            feature hardware."
+        ::= { cpqHeAsr 3 }
+
+    cpqHeAsrTimeout OBJECT-TYPE
+        SYNTAX  INTEGER
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+            "The time-out in minutes for the Automatic Server Recovery
+            feature hardware.  If the variable is not supported, a value
+            of -1 will be returned."
+        ::= { cpqHeAsr 4 }
+
+    cpqHeAsrBaseIo OBJECT-TYPE
+        SYNTAX  INTEGER
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "The Automatic Server Recovery feature Base I/O address."
+        ::= { cpqHeAsr 5 }
+
+    cpqHeAsrPost OBJECT-TYPE
+        SYNTAX  INTEGER {
+            other(1),
+            failed(2),
+            ok(3)
+            }
+        ACCESS  read-only
+        STATUS  deprecated
+        DESCRIPTION
+            "Indicates if the Automatic Server Recovery timer passed
+             the server power-on self test."
+        ::= { cpqHeAsr 6 }
+
+    cpqHeAsrReset OBJECT-TYPE
+        SYNTAX  INTEGER {
+            other(1),
+            manualReset(2),
+            asrReset(3),
+            viewed-asrReset(4)
+            }
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+            "Indicates if the previous reset was caused by the ASR
+             timer. An asrReset(3) condition may be changed with a
+             viewed-asrReset(4) set operation.  This is only valid
+             if this variable's current value is asrReset(3).  Setting
+             this variable to any other value than viewed-asrReset(4)
+             will fail."
+        ::= { cpqHeAsr 7 }
+
+    cpqHeAsrReboot OBJECT-TYPE
+        SYNTAX  INTEGER {
+            other(1),
+            bootOs(2),
+            bootUtilities(3)
+            }
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+            "Indicates what software should be started when the server is
+             rebooted by the ASR feature.
+
+             If this object is currently set to other(1), set operations
+             will fail.  This object may not be set to other(1) by a
+             management station.
+
+             Setting this object to bootOs(2) or bootUtilities(3)
+             will select the software to be started after an ASR reboot."
+        ::= { cpqHeAsr 8 }
+
+    cpqHeAsrRebootLimit OBJECT-TYPE
+        SYNTAX  INTEGER 
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+            "The number of ASR timer reboots that should cause the server to
+            boot the firmware console and override the standard reboot
+            setting (cpqHeAsrReboot).  If this value is 0 then no limit is
+            defined and the standard reboot option will always be used.  If
+            the variable is not supported, a value of -1 will be returned."
+        ::= { cpqHeAsr 9 }
+
+    cpqHeAsrRebootCount OBJECT-TYPE
+        SYNTAX  INTEGER
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+            "The number of ASR reboots that have occurred on this server
+             since the last manual reboot. Reboot count may be reset with
+             a zero valued set operation on this variable. Setting this
+             value to a non-zero value will fail.  If the variable is not
+             supported, a value of -1 will be returned."
+        ::= { cpqHeAsr 10 }
+
+    cpqHeAsrPagerStatus OBJECT-TYPE
+        SYNTAX  INTEGER {
+            other(1),
+            disabled(2),
+            enabled(3)
+            }
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+            "The status of the ASR pager feature.
+
+            If the current value of this object is not other(1), it may
+            be set to disabled(2) or enabled(3).  Attempting a set operation
+            while the value is other(1) will fail.  Attempting to set the
+            value to other(1) will fail.
+
+            Setting this object to enabled(3) will enable the
+            cpqHeAsrStatus object."
+        ::= { cpqHeAsr 11 }
+
+    cpqHeAsrPagerNumber OBJECT-TYPE
+        SYNTAX  DisplayString (SIZE (0..60))
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+            "The pager number to be dialed after an ASR reboot."
+        ::= { cpqHeAsr 12 }
+
+    cpqHeAsrCommPort OBJECT-TYPE
+        SYNTAX  INTEGER
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+            "The communication port to be used by the firmware pager and
+            console.  The value zero (0) indicates this setting is undefined.
+
+            If the current value of this object is zero (0) any
+            attempt to set this object from a management station
+            will fail.  Any attempt to set this object to zero (0)
+            by a management station will fail.  If the variable is not
+            supported, a value of -1 will be returned."
+        ::= { cpqHeAsr 13 }
+
+    cpqHeAsrBaudRate OBJECT-TYPE
+        SYNTAX  INTEGER
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "The baud rate to be used by the firmware pager and console.
+            The value zero (0) indicates this setting is undefined.  If the 
+            variable is not supported, a value of -1 will be returned."
+        ::= { cpqHeAsr 14 }
+
+    cpqHeAsrPagerMessage OBJECT-TYPE
+        SYNTAX  DisplayString (SIZE (0..8))
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+            "The 8 character pager message entered by the user."
+        ::= { cpqHeAsr 15 }
+
+    cpqHeAsrBootFail OBJECT-TYPE
+        SYNTAX  INTEGER {
+            other(1),
+            interrupt18(2)
+            }
+        ACCESS  read-only
+        STATUS  deprecated
+        DESCRIPTION
+            "The action to be taken if an ASR reboot failure occurs."
+        ::= { cpqHeAsr 16 }
+
+    cpqHeAsrCondition OBJECT-TYPE
+        SYNTAX  INTEGER {
+            other(1),
+            ok(2),
+            degraded(3),
+            failed(4)
+            }
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "This value specifies the overall condition of the ASR feature."
+        ::= { cpqHeAsr 17 }
+
+    cpqHeAsrDialInStatus OBJECT-TYPE
+        SYNTAX  INTEGER {
+            other(1),
+            disabled(2),
+            enabled(3)
+            }
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+            "The status of the ASR dial in feature.
+
+            If the current value of this object is other(1) any attempt to
+            set this object from a management station will fail.  Any
+            attempt to set this object to other(1) by a management station
+            will fail.
+
+            Setting this object to enabled(3) will enable the
+            cpqHeAsrStatus object."
+        ::= { cpqHeAsr 18 }
+
+    cpqHeAsrDialOutStatus OBJECT-TYPE
+        SYNTAX  INTEGER {
+            other(1),
+            disabled(2),
+            enabled(3)
+            }
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+            "The status of the ASR dial out feature.
+
+            If the current value of this object is other(1) any attempt to
+            set this object from a management station will fail.  Any
+            attempt to set this object to other(1) by a management station
+            will fail.
+
+            Setting this object to enabled(3) will enable the
+            cpqHeAsrStatus and the cpqHeAsrDialInStatus objects."
+        ::= { cpqHeAsr 19 }
+
+    cpqHeAsrDialOutNumber OBJECT-TYPE
+        SYNTAX  DisplayString (SIZE (0..60))
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+            "The phone number to be dialed for remote diagnostics if an ASR
+            reset occurs."
+        ::= { cpqHeAsr 20 }
+
+    cpqHeAsrNetworkAccessStatus OBJECT-TYPE
+        SYNTAX  INTEGER {
+            other(1),
+            disabled(2),
+            enabled(3)
+            }
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+            "The status of the ASR network access feature.
+
+            If the current value of this object is other(1) any attempt to
+            set this object from a management station will fail.  Any
+            attempt to set this object to other(1) by a management station
+            will fail."
+        ::= { cpqHeAsr 21 }
+
+    cpqHeAsrPollTime OBJECT-TYPE
+        SYNTAX  INTEGER
+        ACCESS  read-write
+        STATUS  optional
+        DESCRIPTION
+            "The poll time in seconds the ASR watchdog timer is being
+             refreshed periodically."
+        ::= { cpqHeAsr 22 }
+
+
+-- ****************************************************************************
+--   Health MIB Thermal Group
+--   ========================
+--
+-- The compaq enterprise               (1.3.6.1.4.1.232)
+--      cpqHealth Group                (1.3.6.1.4.1.232.6)
+--       cpqHeComponent Group          (1.3.6.1.4.1.232.6.2)
+--        cpqHeThermal Group           (1.3.6.1.4.1.232.6.2.6)
+--
+--  The cpqHeThermal group describes the status of the temperature and the
+--  fans that regulate the temperature.
+--
+--  Implementation of the cpqHeThermal group is mandatory for all agents
+--  that support the Server Health MIB on a system that supports the thermal
+--  sensing features.
+--
+-- ****************************************************************************
+
+    cpqHeThermalCondition OBJECT-TYPE
+        SYNTAX  INTEGER {
+            other(1),
+            ok(2),
+            degraded(3),
+            failed(4)
+            }
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "This value specifies the overall condition of the system's
+            thermal environment."
+        ::= { cpqHeThermal 1 }
+
+    cpqHeThermalDegradedAction OBJECT-TYPE
+        SYNTAX  INTEGER {
+            other(1),
+            continue(2),
+            shutdown(3)
+            }
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+            "The action to perform when the thermal condition is degraded.
+
+            This value will be one of the following:
+            other(1)
+              This feature is not supported by this system or driver.
+
+            continue(2)
+              The system should be allowed to continue.
+
+            shutdown(3)
+              The system should be shutdown."
+        ::= { cpqHeThermal 2 }
+
+    cpqHeThermalTempStatus OBJECT-TYPE
+        SYNTAX  INTEGER {
+            other(1),
+            ok(2),
+            degraded(3),
+            failed(4)
+            }
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "The status of the system's temperature sensors:
+
+            This value will be one of the following:
+            other(1)
+              Temp sensing is not supported by this system or driver.
+
+            ok(2)
+              All temp sensors are within normal operating range.
+
+            degraded(3)
+              A temp sensor is outside of normal operating range.
+
+            failed(4)
+              A temp sensor detects a condition that could permanently
+              damage the system.
+
+            The system will automatically shutdown if the failed(4) condition
+            results, so it is unlikely that this value will ever be returned
+            by the agent.  If the cpqHeThermalDegradedAction is set to
+            shutdown(3) the system will be shutdown if the degraded(3)
+            condition occurs."
+        ::= { cpqHeThermal 3 }
+
+    cpqHeThermalSystemFanStatus OBJECT-TYPE
+        SYNTAX  INTEGER {
+            other(1),
+            ok(2),
+            degraded(3),
+            failed(4)
+            }
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "The status of the fan(s) in the system.
+
+            This value will be one of the following:
+            other(1)
+              Fan status detection is not supported by this system or driver.
+
+            ok(2)
+              All fans are operating properly.
+
+            degraded(3)
+              A non-required fan is not operating properly.
+
+            failed(4)
+              A required fan is not operating properly.
+
+            If the cpqHeThermalDegradedAction is set to shutdown(3) the
+            system will be shutdown if the failed(4) condition occurs."
+        ::= { cpqHeThermal 4 }
+
+    cpqHeThermalCpuFanStatus OBJECT-TYPE
+        SYNTAX  INTEGER {
+            other(1),
+            ok(2),
+            failed(4)
+            }
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "The status of the processor fan(s) in the system.
+
+            This value will be one of the following:
+            other(1)
+              Fan status detection is not supported by this system or driver.
+
+            ok(2)
+              All fans are operating properly.
+
+            failed(4)
+              A fan is not operating properly.
+
+            The system will be shutdown if the failed(4) condition occurs."
+        ::= { cpqHeThermal 5 }
+
+-- ****************************************************************************
+--   Health MIB Thermal Fan Table
+--   ============================
+--
+-- The compaq enterprise               (1.3.6.1.4.1.232)
+--      cpqHealth Group                (1.3.6.1.4.1.232.6)
+--       cpqHeComponent Group          (1.3.6.1.4.1.232.6.2)
+--        cpqHeThermal Group           (1.3.6.1.4.1.232.6.2.6)
+--         cpqHeThermalFanTable        (1.3.6.1.4.1.232.6.2.6.6)
+--
+-- ****************************************************************************
+
+    cpqHeThermalFanTable OBJECT-TYPE
+        SYNTAX  SEQUENCE OF CpqHeThermalFanEntry
+        ACCESS  not-accessible
+        STATUS  mandatory
+        DESCRIPTION
+            "A table of fan descriptions."
+        ::= { cpqHeThermal 6 }
+
+    cpqHeThermalFanEntry OBJECT-TYPE
+        SYNTAX  CpqHeThermalFanEntry
+        ACCESS  not-accessible
+        STATUS  mandatory
+        DESCRIPTION
+            "A fan description."
+        INDEX   { cpqHeThermalFanIndex }
+        ::= { cpqHeThermalFanTable 1 }
+
+    CpqHeThermalFanEntry ::= SEQUENCE {
+        cpqHeThermalFanIndex       INTEGER,
+        cpqHeThermalFanRequired    INTEGER,
+        cpqHeThermalFanPresent     INTEGER,
+        cpqHeThermalFanCpuFan      INTEGER,
+        cpqHeThermalFanStatus      INTEGER,
+        cpqHeThermalFanHwLocation  DisplayString,
+        cpqHeThermalFanCurrentSpeed INTEGER
+    }
+
+    cpqHeThermalFanIndex OBJECT-TYPE
+        SYNTAX  INTEGER (0..8)
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "A number that uniquely specifies this fan description."
+        ::= { cpqHeThermalFanEntry 1 }
+
+    cpqHeThermalFanRequired OBJECT-TYPE
+        SYNTAX  INTEGER {
+            other(1),
+            nonRequired(2),
+            required(3)
+            }
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "This specifies if the fan described is required for proper
+            operation of the system."
+        ::= { cpqHeThermalFanEntry 2 }
+
+    cpqHeThermalFanPresent OBJECT-TYPE
+        SYNTAX  INTEGER {
+            other(1),
+            absent(2),
+            present(3)
+            }
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "This specifies if the fan described is present in the system."
+        ::= { cpqHeThermalFanEntry 3 }
+
+    cpqHeThermalFanCpuFan OBJECT-TYPE
+        SYNTAX  INTEGER {
+            other(1),
+            systemFan(2),
+            cpuFan(3)
+            }
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "This specifies if the described fan is intended specifically
+             to cool the CPU(s)."
+        ::= { cpqHeThermalFanEntry 4 }
+
+    cpqHeThermalFanStatus OBJECT-TYPE
+        SYNTAX  INTEGER {
+            other(1),
+            ok(2),
+            failed(4)
+            }
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "This specifies if the fan described is operating properly.
+
+            This value will be one of the following:
+            other(1)
+              Fan status detection is not supported by this system or driver.
+
+            ok(2)
+              The fan is operating properly.
+
+            failed(4)
+              The fan is not operating properly."
+        ::= { cpqHeThermalFanEntry 5 }
+
+    cpqHeThermalFanHwLocation  OBJECT-TYPE
+        SYNTAX  DisplayString (SIZE (0..255))
+        ACCESS  read-only
+        STATUS  optional
+        DESCRIPTION
+            "A text description of the hardware location, on complex
+             multi SBB hardware only, for the fan.
+             A NULL string indicates that the hardware location could not
+             be determined or is irrelevant."
+        ::= { cpqHeThermalFanEntry 6 }
+
+    cpqHeThermalFanCurrentSpeed  OBJECT-TYPE
+        SYNTAX  INTEGER
+        ACCESS  read-only
+        STATUS  optional
+        DESCRIPTION
+            "The current speed of a fan in rpm - revolutions per minute."
+        ::= { cpqHeThermalFanEntry 7 }
+
+
+-- ****************************************************************************
+--   Health MIB Fault Tolerant Fan Table
+--   ===================================
+--
+-- The compaq enterprise               (1.3.6.1.4.1.232)
+--      cpqHealth Group                (1.3.6.1.4.1.232.6)
+--       cpqHeComponent Group          (1.3.6.1.4.1.232.6.2)
+--        cpqHeThermal Group           (1.3.6.1.4.1.232.6.2.6)
+--         cpqHeFltTolFanTable         (1.3.6.1.4.1.232.6.2.6.7)
+--
+-- ****************************************************************************
+
+    cpqHeFltTolFanTable OBJECT-TYPE
+        SYNTAX  SEQUENCE OF CpqHeFltTolFanEntry
+        ACCESS  not-accessible
+        STATUS  mandatory
+        DESCRIPTION
+            "A table of Fault Tolerant Fan Entries."
+        ::= { cpqHeThermal 7 }
+
+    cpqHeFltTolFanEntry OBJECT-TYPE
+        SYNTAX  CpqHeFltTolFanEntry
+        ACCESS  not-accessible
+        STATUS  mandatory
+        DESCRIPTION
+            "A Fault Tolerant Fan Entry."
+        INDEX   { cpqHeFltTolFanChassis, cpqHeFltTolFanIndex }
+        ::= { cpqHeFltTolFanTable 1 }
+
+    CpqHeFltTolFanEntry ::= SEQUENCE {
+        cpqHeFltTolFanChassis                   INTEGER,
+        cpqHeFltTolFanIndex                     INTEGER,
+        cpqHeFltTolFanLocale                    INTEGER,
+        cpqHeFltTolFanPresent                   INTEGER,
+        cpqHeFltTolFanType                      INTEGER,
+        cpqHeFltTolFanSpeed                     INTEGER,
+        cpqHeFltTolFanRedundant                 INTEGER,
+        cpqHeFltTolFanRedundantPartner          INTEGER,
+        cpqHeFltTolFanCondition                 INTEGER,
+        cpqHeFltTolFanHotPlug                   INTEGER,
+        cpqHeFltTolFanHwLocation                DisplayString,
+        cpqHeFltTolFanCurrentSpeed              INTEGER
+    }
+
+    cpqHeFltTolFanChassis OBJECT-TYPE
+        SYNTAX  INTEGER
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "The System Chassis number."
+        ::= { cpqHeFltTolFanEntry 1 }
+
+    cpqHeFltTolFanIndex OBJECT-TYPE
+        SYNTAX  INTEGER
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "A number that uniquely specifies this fan description."
+        ::= { cpqHeFltTolFanEntry 2 }
+
+    cpqHeFltTolFanLocale OBJECT-TYPE
+        SYNTAX  INTEGER {
+            other(1),
+            unknown(2),
+            system(3),
+            systemBoard(4),
+            ioBoard(5),
+            cpu(6),
+            memory(7),
+            storage(8),
+            removableMedia(9),
+            powerSupply(10),
+            ambient(11),
+            chassis(12),
+            bridgeCard(13),
+            managementBoard(14),
+            backplane(15),
+            networkSlot(16),
+            bladeSlot(17),
+            virtual(18)
+            }
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "This specifies the location of the fan in the system."
+        ::= { cpqHeFltTolFanEntry 3 }
+
+    cpqHeFltTolFanPresent OBJECT-TYPE
+        SYNTAX  INTEGER {
+            other(1),
+            absent(2),
+            present(3)
+            }
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "This specifies if the fan described is present in the system."
+        ::= { cpqHeFltTolFanEntry 4 }
+
+    cpqHeFltTolFanType OBJECT-TYPE
+        SYNTAX  INTEGER {
+            other(1),
+            tachOutput(2),
+            spinDetect(3)
+            }
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "This specifies the type of fan.
+
+            other(1)
+              The type of fan could not be determined.
+
+            tachOutput(2)
+              The fan can increase speed for greater cooling.  Implies
+              spin detect.
+
+            spinDetect(3)
+              The fan can detect when the fan stops spinning."
+        ::= { cpqHeFltTolFanEntry 5 }
+
+    cpqHeFltTolFanSpeed OBJECT-TYPE
+        SYNTAX  INTEGER {
+            other(1),
+            normal(2),
+            high(3)
+            }
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "This specifies the speed of the fan.  This value will be set
+            if the fan type is tachOutput."
+        ::= { cpqHeFltTolFanEntry 6 }
+
+    cpqHeFltTolFanRedundant OBJECT-TYPE
+        SYNTAX  INTEGER {
+            other(1),
+            notRedundant(2),
+            redundant(3)
+            }
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "This specifies if the fan is in a redundant configuration."
+        ::= { cpqHeFltTolFanEntry 7 }
+
+    cpqHeFltTolFanRedundantPartner OBJECT-TYPE
+        SYNTAX  INTEGER
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "This specifies the index of the redundant partner.  A value
+            of zero will be used if there is no redundant partner."
+        ::= { cpqHeFltTolFanEntry 8 }
+
+    cpqHeFltTolFanCondition OBJECT-TYPE
+        SYNTAX  INTEGER {
+            other(1),
+            ok(2),
+            degraded(3),
+            failed(4)
+            }
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "The condition of the fan.
+
+            This value will be one of the following:
+            other(1)
+              Fan status detection is not supported by this system or driver.
+
+            ok(2)
+              The fan is operating properly.
+
+            degraded(2)
+              A redundant fan is not operating properly.
+
+            failed(4)
+              A non-redundant fan is not operating properly."
+        ::= { cpqHeFltTolFanEntry 9 }
+ 
+    cpqHeFltTolFanHotPlug OBJECT-TYPE
+        SYNTAX  INTEGER {
+            other(1),
+            nonHotPluggable(2),
+            hotPluggable(3)
+            }
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "This indicates if the fan is capable of being removed and/or
+            inserted while the system is in an operational state.
+
+            If the value is hotPluggable(3), the fan can be safely
+            removed if and only if the cpqHeFltTolFanRedundant
+            field is in a redundant(3) state.
+
+            This value will be one of the following:
+            other(1)
+              The state could not be determined.
+
+            nonHotPluggable(2)
+              The fan is not hot plug capable.
+
+            hotPluggable(3)
+              The fan is hot plug capable and can be removed if
+              the system is operating in a redundant state.  A fan
+              may be added to an empty fan bay."
+        ::= { cpqHeFltTolFanEntry 10 }
+
+    cpqHeFltTolFanHwLocation OBJECT-TYPE
+        SYNTAX  DisplayString (SIZE (0..255))
+        ACCESS  read-only
+        STATUS  optional
+        DESCRIPTION
+            "A text description of the hardware location, on complex
+             multi SBB hardware only, for the fan.
+             A NULL string indicates that the hardware location could not
+             be determined or is irrelevant."
+        ::= { cpqHeFltTolFanEntry 11 }
+
+    cpqHeFltTolFanCurrentSpeed OBJECT-TYPE
+        SYNTAX  INTEGER
+        ACCESS  read-only
+        STATUS  optional
+        DESCRIPTION
+            "The current speed of a fan in rpm - revolutions per minute."
+        ::= { cpqHeFltTolFanEntry 12 }
+
+
+-- ****************************************************************************
+--   Health MIB Temperature Sensor Table
+--   ===================================
+--
+-- The compaq enterprise               (1.3.6.1.4.1.232)
+--      cpqHealth Group                (1.3.6.1.4.1.232.6)
+--       cpqHeComponent Group          (1.3.6.1.4.1.232.6.2)
+--        cpqHeThermal Group           (1.3.6.1.4.1.232.6.2.6)
+--         cpqHeTemperatureTable       (1.3.6.1.4.1.232.6.2.6.8)
+--
+-- ****************************************************************************
+
+    cpqHeTemperatureTable OBJECT-TYPE
+        SYNTAX  SEQUENCE OF CpqHeTemperatureEntry
+        ACCESS  not-accessible
+        STATUS  mandatory
+        DESCRIPTION
+            "A table of Temperature Sensor Entries."
+        ::= { cpqHeThermal 8 }
+
+    cpqHeTemperatureEntry OBJECT-TYPE
+        SYNTAX  CpqHeTemperatureEntry
+        ACCESS  not-accessible
+        STATUS  mandatory
+        DESCRIPTION
+            "A Temperature Sensor Entry."
+        INDEX   { cpqHeTemperatureChassis, cpqHeTemperatureIndex }
+        ::= { cpqHeTemperatureTable 1 }
+
+    CpqHeTemperatureEntry ::= SEQUENCE {
+        cpqHeTemperatureChassis                   INTEGER,
+        cpqHeTemperatureIndex                     INTEGER,
+        cpqHeTemperatureLocale                    INTEGER,
+        cpqHeTemperatureCelsius                   INTEGER,
+        cpqHeTemperatureThreshold                 INTEGER,
+        cpqHeTemperatureCondition                 INTEGER,
+        cpqHeTemperatureThresholdType             INTEGER,
+        cpqHeTemperatureHwLocation                DisplayString
+    }
+
+    cpqHeTemperatureChassis OBJECT-TYPE
+        SYNTAX  INTEGER
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "The System Chassis number."
+        ::= { cpqHeTemperatureEntry 1 }
+
+    cpqHeTemperatureIndex OBJECT-TYPE
+        SYNTAX  INTEGER
+        ACCESS  read-only 
+        STATUS  mandatory
+        DESCRIPTION
+            "A number that uniquely specifies this temperature sensor
+            description."
+        ::= { cpqHeTemperatureEntry 2 }
+
+    cpqHeTemperatureLocale OBJECT-TYPE
+        SYNTAX  INTEGER {
+            other(1),
+            unknown(2),
+            system(3),
+            systemBoard(4),
+            ioBoard(5),
+            cpu(6),
+            memory(7),
+            storage(8),
+            removableMedia(9),
+            powerSupply(10),
+            ambient(11),
+            chassis(12),
+            bridgeCard(13)
+            }
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "This specifies the location of the temperature sensor
+            present in the system."
+        ::= { cpqHeTemperatureEntry 3 }
+
+    cpqHeTemperatureCelsius OBJECT-TYPE
+        SYNTAX  INTEGER
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "This is the current temperature sensor reading in degrees
+            celsius.
+
+            If this value cannot be determined by software, then a value
+            of -1 will be returned."
+        ::= { cpqHeTemperatureEntry 4 }
+
+    cpqHeTemperatureThreshold OBJECT-TYPE
+        SYNTAX  INTEGER
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+            "This is the shutdown threshold temperature sensor setting
+            in degrees celsius.  This is the temperature in which the
+            sensor will be considered to be in a failed state thus
+            causing the system to be shutdown.
+
+            If this value cannot be determined by software, then a value
+            of -1 will be returned.
+
+            Only the Ambient zone type allows setting of the threshold
+            temperature."
+        ::= { cpqHeTemperatureEntry 5 }
+
+    cpqHeTemperatureCondition OBJECT-TYPE
+        SYNTAX  INTEGER {
+            other(1),
+            ok(2),
+            degraded(3),
+            failed(4)
+            }
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "The Temperature sensor condition.
+
+            This value will be one of the following:
+            other(1)
+              Temperature could not be determined.
+
+            ok(2)
+              The temperature sensor is within normal operating range.
+
+            degraded(3)
+              The temperature sensor is outside of normal operating range.
+
+            failed(4)
+              The temperature sensor detects a condition that could
+              permanently damage the system.
+
+            The system will automatically shutdown if the failed(4) condition
+            results, so it is unlikely that this value will ever be returned
+            by the agent.  If the cpqHeThermalDegradedAction is set to
+            shutdown(3) the system will be shutdown if the degraded(3)
+            condition occurs."
+        ::= { cpqHeTemperatureEntry 6 }
+
+    cpqHeTemperatureThresholdType OBJECT-TYPE
+        SYNTAX  INTEGER {
+            other(1),
+            blowout(5),
+            caution(9),
+            critical(15)
+            }
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "This specifies the type of this instance of temperature
+            sensor.
+
+            This value will be one of the following:
+            other(1)
+              Temperature threshold type could not be determined.
+
+            blowout(5)
+              If a blowout(5) temperature sensor reaches its threshold,
+              the fan or fans in the area of the temperature sensor will
+              increase in speed in an attempt to reduce the temperature
+              before a caution or critical threshold is reached.
+
+            caution(9)
+              If a caution(9) temperature sensor reaches its threshold,
+              the cpqHeTemperatureCondition will be set to degraded(3)
+              and the system will either continue or shutdown depending
+              on the setting of cpqHeThermalDegradedAction.
+
+            critical(15)
+              If a critical(15) temperature sensor reaches its threshold,
+              the cpqHeTemperatureCondition will be set to failed(4)
+              and the system will shutdown."
+        ::= { cpqHeTemperatureEntry 7 }
+
+    cpqHeTemperatureHwLocation OBJECT-TYPE
+        SYNTAX  DisplayString (SIZE (0..255))
+        ACCESS  read-only
+        STATUS  optional
+        DESCRIPTION
+            "A text description of the hardware location, on complex
+             multi SBB hardware only, for the temperature sensor.
+             A NULL string indicates that the hardware location could not
+             be determined or is irrelevant."
+        ::= { cpqHeTemperatureEntry 8 }
+
+-- ****************************************************************************
+--   Health MIB Post Message Group
+--   =============================
+--
+-- The compaq enterprise               (1.3.6.1.4.1.232)
+--      cpqHealth Group                (1.3.6.1.4.1.232.6)
+--       cpqHeComponent Group          (1.3.6.1.4.1.232.6.2)
+--        cpqHePostMsg Group           (1.3.6.1.4.1.232.6.2.7)
+--
+--  The cpqHePostMsg group contains a table of the non-critical POST
+--  errors that occurred during the last reboot.
+--
+--  Implementation of the cpqHePostMsg group is mandatory for all agents
+--  that support the Server Health MIB on a system that supports the POST
+--  error recording feature.
+--
+-- ****************************************************************************
+
+    cpqHePostMsgCondition OBJECT-TYPE
+        SYNTAX  INTEGER {
+            other(1),
+            ok(2),
+            degraded(3),
+            failed(4)
+            }
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "This value specifies the overall condition of the POST
+            error recording feature."
+        ::= { cpqHePostMsg 1 }
+
+-- ****************************************************************************
+--   Health MIB Post Message Table
+--   =============================
+--
+-- The compaq enterprise               (1.3.6.1.4.1.232)
+--      cpqHealth Group                (1.3.6.1.4.1.232.6)
+--       cpqHeComponent Group          (1.3.6.1.4.1.232.6.2)
+--        cpqHePostMsg Group           (1.3.6.1.4.1.232.6.2.7)
+--         cpqHePostMsgTable           (1.3.6.1.4.1.232.6.2.7.2)
+--
+--      This table may be empty if no errors occurred during POST.
+--
+-- ****************************************************************************
+
+    cpqHePostMsgTable OBJECT-TYPE
+        SYNTAX  SEQUENCE OF CpqHePostMsgEntry
+        ACCESS  not-accessible
+        STATUS  mandatory
+        DESCRIPTION
+            "A table of POST error message numbers."
+        ::= { cpqHePostMsg 2 }
+
+    cpqHePostMsgEntry OBJECT-TYPE
+        SYNTAX  CpqHePostMsgEntry
+        ACCESS  not-accessible
+        STATUS  mandatory
+        DESCRIPTION
+            "A POST error message number."
+        INDEX   { cpqHePostMsgIndex }
+        ::= { cpqHePostMsgTable 1 }
+
+    CpqHePostMsgEntry ::= SEQUENCE {
+        cpqHePostMsgIndex       INTEGER,
+        cpqHePostMsgCode        INTEGER,
+        cpqHePostMsgDesc        DisplayString
+    }
+
+
+    cpqHePostMsgIndex OBJECT-TYPE
+        SYNTAX  INTEGER (0..255)
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "A number that uniquely specifies this POST error description."
+        ::= { cpqHePostMsgEntry 1 }
+
+    cpqHePostMsgCode OBJECT-TYPE
+        SYNTAX  INTEGER (0..255)
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "This specifies POST message number for this error."
+        ::= { cpqHePostMsgEntry 2 }
+
+    cpqHePostMsgDesc OBJECT-TYPE
+         SYNTAX  DisplayString (SIZE (0..255))
+         ACCESS  read-only
+         STATUS  mandatory
+         DESCRIPTION
+             "This contains a text description of the POST error.
+              A string of length zero (0) will be returned if no description
+              is available."
+         ::= { cpqHePostMsgEntry 3 }
+
+    cpqHePostMsgEv OBJECT-TYPE
+        SYNTAX  OCTET STRING (SIZE (0..8))
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+            "The EV used to store 8 non-critical POST error codes
+             for use with Quicktest, Utilities, and CIM. Setting
+             this variable with a zero length octet string will
+             clear this variable.  All other set operations will
+             fail."
+        ::= { cpqHePostMsg 3 }
+
+
+-- ****************************************************************************
+--   Health MIB System Utilization Group
+--   ===================================
+--
+-- The compaq enterprise               (1.3.6.1.4.1.232)
+--      cpqHealth Group                (1.3.6.1.4.1.232.6)
+--       cpqHeComponent Group          (1.3.6.1.4.1.232.6.2)
+--        cpqHeSysUtil Group           (1.3.6.1.4.1.232.6.2.8)
+--
+--  The cpqHeSysUtil group contains measures of system utilization.
+--  This group includes long term utilization information like the total
+--  server up time since originally configured.  This group also contains
+--  current operating utilization information such as the current EISA bus
+--  utilization.
+--
+--  Implementation of the cpqHeSysUtil group is mandatory for all agents
+--  that support the Server Health MIB on a system that supports any system
+--  utilization features.
+--
+-- ****************************************************************************
+
+    cpqHeSysUtilLifeTime OBJECT-TYPE
+        SYNTAX  INTEGER (0..2147483647)
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "The total time (in minutes) the system has been in full
+             operation (while the server health supporting software was
+             running)."
+        ::= { cpqHeSysUtil 1 }
+
+    cpqHeSysUtilEisaBusMin OBJECT-TYPE
+        SYNTAX  INTEGER
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "The EISA bus utilization as a percentage of the theoretical
+            maximum during the last minute.  A value of -1 indicates that
+            this feature is not supported on this machine or is not
+            available."
+        ::= { cpqHeSysUtil 2 }
+
+    cpqHeSysUtilEisaBusFiveMin OBJECT-TYPE
+        SYNTAX  INTEGER
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "The EISA bus utilization as a percentage of the theoretical
+            maximum during the last five minutes.  A value of -1 indicates
+            that this feature is not supported on this machine or is not
+            available."
+        ::= { cpqHeSysUtil 3 }
+
+    cpqHeSysUtilEisaBusThirtyMin OBJECT-TYPE
+        SYNTAX  INTEGER
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "The EISA bus utilization as a percentage of the theoretical
+            maximum during the last thirty minutes.  A value of -1
+            indicates that this feature is not supported on this machine
+            or is not available."
+        ::= { cpqHeSysUtil 4 }
+
+    cpqHeSysUtilEisaBusHour OBJECT-TYPE
+        SYNTAX  INTEGER
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "The EISA bus utilization as a percentage of the theoretical
+            maximum during the last hour.  A value of -1 indicates that
+            this feature is not supported on this machine or is not
+            available."
+        ::= { cpqHeSysUtil 5 }
+
+-- ****************************************************************************
+--   Health MIB PCI Utilization Table
+--   ====================================
+--
+-- The compaq enterprise               (1.3.6.1.4.1.232)
+--      cpqHealth Group                (1.3.6.1.4.1.232.6)
+--       cpqHeComponent Group          (1.3.6.1.4.1.232.6.2)
+--        cpqHeSysUtil Group           (1.3.6.1.4.1.232.6.2.8)
+--         cpqHeSysUtilPciTable        (1.3.6.1.4.1.232.6.2.8.6)
+--
+--
+-- ****************************************************************************
+
+    cpqHeSysUtilPciTable OBJECT-TYPE
+        SYNTAX  SEQUENCE OF CpqHeSysUtilPciEntry
+        ACCESS  not-accessible
+        STATUS  mandatory
+        DESCRIPTION
+            "A table of PCI utilization numbers for a whole aggregate
+            PCI bus or a specific device on that bus."
+        ::= { cpqHeSysUtil 6 }
+
+    cpqHeSysUtilPciEntry OBJECT-TYPE
+        SYNTAX  CpqHeSysUtilPciEntry
+        ACCESS  not-accessible
+        STATUS  mandatory
+        DESCRIPTION
+            "PCI utilization entry"
+        INDEX   { cpqHeSysUtilPciIndex }
+        ::= { cpqHeSysUtilPciTable 1 }
+
+    CpqHeSysUtilPciEntry ::= SEQUENCE {
+        cpqHeSysUtilPciIndex     INTEGER,
+        cpqHeSysUtilPciBus       INTEGER,
+        cpqHeSysUtilPciDevice    INTEGER,
+        cpqHeSysUtilPciMin       INTEGER,
+        cpqHeSysUtilPciFiveMin   INTEGER,
+        cpqHeSysUtilPciThirtyMin INTEGER,
+        cpqHeSysUtilPciHour       INTEGER,
+        cpqHeSysUtilPciHwLocation DisplayString
+    }
+
+    cpqHeSysUtilPciIndex OBJECT-TYPE
+        SYNTAX  INTEGER (0..255)
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "A unique index into each PCI utilization table entry. "
+        ::= { cpqHeSysUtilPciEntry 1 }
+
+    cpqHeSysUtilPciBus OBJECT-TYPE
+        SYNTAX  INTEGER (0..255)
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "The PCI bus number for this set of utilization numbers. "
+        ::= { cpqHeSysUtilPciEntry 2 }
+
+    cpqHeSysUtilPciDevice OBJECT-TYPE
+        SYNTAX  INTEGER
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "The PCI device number for this set of utilization numbers.
+            If this value is -1, the utilization reported is for the
+            aggregate of all devices on this PCI bus. "
+        ::= { cpqHeSysUtilPciEntry 3 }
+
+    cpqHeSysUtilPciMin OBJECT-TYPE
+        SYNTAX  INTEGER
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "The utilization as a percentage of the theoretical
+            maximum during the last minute.  A value of -1 indicates
+            that the utilization number is not available."
+        ::= { cpqHeSysUtilPciEntry 4 }
+
+    cpqHeSysUtilPciFiveMin OBJECT-TYPE
+        SYNTAX  INTEGER
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "The utilization as a percentage of the theoretical
+            maximum during the last five minutes.  A value of -1
+            indicates that the utilization number is not available."
+        ::= { cpqHeSysUtilPciEntry 5 }
+
+    cpqHeSysUtilPciThirtyMin OBJECT-TYPE
+        SYNTAX  INTEGER
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "The utilization as a percentage of the theoretical
+            maximum during the last thirty minutes.  A value of -1
+            indicates that the utilization number is not available."
+        ::= { cpqHeSysUtilPciEntry 6 }
+
+    cpqHeSysUtilPciHour OBJECT-TYPE
+        SYNTAX  INTEGER
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "The utilization as a percentage of the theoretical
+            maximum during the last hour.  A value of -1 indicates
+            that the utilization number is not available."
+        ::= { cpqHeSysUtilPciEntry 7 }
+
+    cpqHeSysUtilPciHwLocation OBJECT-TYPE
+        SYNTAX  DisplayString (SIZE (0..255))
+        ACCESS  read-only
+        STATUS  optional
+        DESCRIPTION
+            "A text description of the hardware location, on complex
+             multi SBB hardware only, for the PCI drawer.
+             A NULL string indicates that the hardware location could not
+             be determined or is irrelevant."
+        ::= { cpqHeSysUtilPciEntry 8 }
+
+-- ****************************************************************************
+--   Health MIB Fault Tolerant Power Supply Group
+--   ============================================
+--
+-- The compaq enterprise               (1.3.6.1.4.1.232)
+--      cpqHealth Group                (1.3.6.1.4.1.232.6)
+--       cpqHeComponent Group          (1.3.6.1.4.1.232.6.2)
+--        cpqHeFltTolPwrSupply Group   (1.3.6.1.4.1.232.6.2.9)
+--
+--  The cpqHeFltTolPwrSupply group contains management information about fault
+--  tolerant power supplies.
+-- 
+--  Implementation of the cpqHeFltTolPwrSupply group is mandatory for all
+--  agents that support the Server Health MIB.
+--
+-- ****************************************************************************
+    cpqHeFltTolPwrSupplyCondition OBJECT-TYPE
+        SYNTAX  INTEGER {
+            other(1),
+            ok(2),
+            degraded(3),
+            failed(4)
+            }
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "This value specifies the overall condition of the fault tolerant
+             power supply sub-system."
+        ::= { cpqHeFltTolPwrSupply 1 }
+
+      cpqHeFltTolPwrSupplyStatus OBJECT-TYPE
+        SYNTAX  INTEGER {
+            other(1),
+            notSupported(2),
+            notInstalled(3),
+            installed(4)
+            }
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "This value specifies the status of the fault tolerant power
+             supply."
+        ::= { cpqHeFltTolPwrSupply 2 }
+
+-- ****************************************************************************
+--   Health MIB Fault Tolerant Power Supply Table
+--   ============================================
+--
+-- The compaq enterprise               (1.3.6.1.4.1.232)
+--      cpqHealth Group                (1.3.6.1.4.1.232.6)
+--       cpqHeComponent Group          (1.3.6.1.4.1.232.6.2)
+--        cpqHeFltTolPowerSupply Group (1.3.6.1.4.1.232.6.2.9)
+--         cpqHeFltTolPowerSupplyTable (1.3.6.1.4.1.232.6.2.9.3)
+--
+-- ****************************************************************************
+
+    cpqHeFltTolPowerSupplyTable OBJECT-TYPE
+        SYNTAX  SEQUENCE OF CpqHeFltTolPowerSupplyEntry
+        ACCESS  not-accessible
+        STATUS  mandatory
+        DESCRIPTION
+            "A table of Power Supply Entries."
+        ::= { cpqHeFltTolPwrSupply 3 }
+
+    cpqHeFltTolPowerSupplyEntry OBJECT-TYPE
+        SYNTAX  CpqHeFltTolPowerSupplyEntry
+        ACCESS  not-accessible
+        STATUS  mandatory
+        DESCRIPTION
+            "A Fault Tolerant Power Supply Entry."
+        INDEX   { cpqHeFltTolPowerSupplyChassis, cpqHeFltTolPowerSupplyBay }
+        ::= { cpqHeFltTolPowerSupplyTable 1 }
+
+    CpqHeFltTolPowerSupplyEntry ::= SEQUENCE {
+        cpqHeFltTolPowerSupplyChassis             INTEGER,
+        cpqHeFltTolPowerSupplyBay                 INTEGER,
+        cpqHeFltTolPowerSupplyPresent             INTEGER,
+        cpqHeFltTolPowerSupplyCondition           INTEGER,
+        cpqHeFltTolPowerSupplyStatus              INTEGER,
+        cpqHeFltTolPowerSupplyMainVoltage         INTEGER,
+        cpqHeFltTolPowerSupplyCapacityUsed        INTEGER,
+        cpqHeFltTolPowerSupplyCapacityMaximum     INTEGER,
+        cpqHeFltTolPowerSupplyRedundant           INTEGER,
+        cpqHeFltTolPowerSupplyModel               DisplayString,
+        cpqHeFltTolPowerSupplySerialNumber        DisplayString,
+        cpqHeFltTolPowerSupplyAutoRev             OCTET STRING,
+        cpqHeFltTolPowerSupplyHotPlug             INTEGER,
+        cpqHeFltTolPowerSupplyFirmwareRev         DisplayString,
+        cpqHeFltTolPowerSupplyHwLocation          DisplayString,
+        cpqHeFltTolPowerSupplySparePartNum        DisplayString,
+        cpqHeFltTolPowerSupplyRedundantPartner    INTEGER
+    }
+
+    cpqHeFltTolPowerSupplyChassis OBJECT-TYPE
+        SYNTAX  INTEGER
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "The system chassis number." 
+        ::= { cpqHeFltTolPowerSupplyEntry 1 }
+
+    cpqHeFltTolPowerSupplyBay OBJECT-TYPE
+        SYNTAX  INTEGER
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "The bay number to index within this chassis."
+        ::= { cpqHeFltTolPowerSupplyEntry 2 }
+
+    cpqHeFltTolPowerSupplyPresent OBJECT-TYPE
+        SYNTAX  INTEGER {
+            other(1),
+            absent(2),
+            present(3)
+            }
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "Indicates whether the power supply is present in the chassis."
+        ::= { cpqHeFltTolPowerSupplyEntry 3 }
+
+    cpqHeFltTolPowerSupplyCondition OBJECT-TYPE
+        SYNTAX  INTEGER {
+            other(1),
+            ok(2),
+            degraded(3),
+            failed(4)
+            }
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "The condition of the power supply.
+
+            This value will be one of the following:
+
+            other(1)
+              The status could not be determined or not present.
+
+            ok(2)
+              The power supply is operating normally.
+
+            degraded(3)
+              A temperature sensor, fan or other power supply component is
+              outside of normal operating range.
+
+            failed(4)
+              A power supply component detects a condition that could
+              permanently damage the system."
+        ::= { cpqHeFltTolPowerSupplyEntry 4 }
+
+    cpqHeFltTolPowerSupplyStatus OBJECT-TYPE
+        SYNTAX  INTEGER {
+            noError(1),
+            generalFailure(2),
+            bistFailure(3),
+            fanFailure(4),
+            tempFailure(5),
+            interlockOpen(6),
+            epromFailed(7),
+            vrefFailed(8),
+            dacFailed(9),
+            ramTestFailed(10),
+            voltageChannelFailed(11),
+            orringdiodeFailed(12),
+            brownOut(13),
+            giveupOnStartup(14),
+            nvramInvalid(15),
+            calibrationTableInvalid(16)
+            }
+        ACCESS  read-only 
+        STATUS  mandatory
+        DESCRIPTION
+            "The status of the power supply."
+        ::= { cpqHeFltTolPowerSupplyEntry 5 }
+
+    cpqHeFltTolPowerSupplyMainVoltage OBJECT-TYPE
+        SYNTAX  INTEGER
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "The input main voltage of the power supply in volts."
+        ::= { cpqHeFltTolPowerSupplyEntry 6 }
+
+    cpqHeFltTolPowerSupplyCapacityUsed OBJECT-TYPE
+        SYNTAX  INTEGER
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "The currently used capacity of the power supply in watts."
+        ::= { cpqHeFltTolPowerSupplyEntry 7 }
+
+    cpqHeFltTolPowerSupplyCapacityMaximum OBJECT-TYPE
+        SYNTAX  INTEGER
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "The maximum capacity of the power supply in watts."
+        ::= { cpqHeFltTolPowerSupplyEntry 8 }
+
+    cpqHeFltTolPowerSupplyRedundant OBJECT-TYPE
+        SYNTAX  INTEGER {
+            other(1),
+            notRedundant(2),
+            redundant(3)
+            }
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "The redundancy state of the power supply.
+
+            This value will be one of the following:
+            other(1)
+              The redundancy state could not be determined.
+
+            notRedundant(2)
+              The power supply is not operating in a redundant state.
+
+            redundant(3)
+              The power supply is operating in a redundant state."
+        ::= { cpqHeFltTolPowerSupplyEntry 9 }
+
+    cpqHeFltTolPowerSupplyModel OBJECT-TYPE
+        SYNTAX  DisplayString (SIZE (0..80))
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "The power supply model name."
+        ::= { cpqHeFltTolPowerSupplyEntry 10 }
+
+    cpqHeFltTolPowerSupplySerialNumber OBJECT-TYPE
+        SYNTAX  DisplayString (SIZE (0..80))
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "The power supply serial number."
+        ::= { cpqHeFltTolPowerSupplyEntry 11 }
+
+    cpqHeFltTolPowerSupplyAutoRev OBJECT-TYPE
+        SYNTAX  OCTET STRING (SIZE (0..4))
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "The power supply auto revision number."
+        ::= { cpqHeFltTolPowerSupplyEntry 12 }
+
+    cpqHeFltTolPowerSupplyHotPlug OBJECT-TYPE
+        SYNTAX  INTEGER {
+            other(1),
+            nonHotPluggable(2),
+            hotPluggable(3)
+            }
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "This indicates if the power supply is capable of being
+            removed and/or inserted while the system is in an operational
+            state.
+
+            If the value is hotPluggable(3), the power supply can be safely
+            removed if and only if the cpqHeFltTolPowerSupplyRedundant
+            field is in a redundant(3) state.
+
+            This value will be one of the following:
+            other(1)
+              The state could not be determined.
+
+            nonHotPluggable(2)
+              The power supply is not hot plug capable.
+
+            hotPluggable(3)
+              The power supply is hot plug capable and can be removed if
+              the system is operating in a redundant state.  A power
+              supply may be added to an empty power supply bay."
+        ::= { cpqHeFltTolPowerSupplyEntry 13 }
+
+    cpqHeFltTolPowerSupplyFirmwareRev OBJECT-TYPE
+        SYNTAX  DisplayString (SIZE (0..24))
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "The power supply firmware revision.  This field will be left
+            blank if the firmware revision is unknown."
+        ::= { cpqHeFltTolPowerSupplyEntry 14 }
+
+    cpqHeFltTolPowerSupplyHwLocation OBJECT-TYPE
+        SYNTAX  DisplayString (SIZE (0..255))
+        ACCESS  read-only
+        STATUS  optional
+        DESCRIPTION
+            "A text description of the hardware location, on complex
+             multi SBB hardware only, for the power supply.
+             A NULL string indicates that the hardware location could not
+             be determined or is irrelevant."
+        ::= { cpqHeFltTolPowerSupplyEntry 15 }
+
+    cpqHeFltTolPowerSupplySparePartNum OBJECT-TYPE
+        SYNTAX  DisplayString (SIZE (0..80))
+        ACCESS  read-only
+        STATUS  optional
+        DESCRIPTION
+            "The power supply spare part number."
+        ::= { cpqHeFltTolPowerSupplyEntry 16 }
+
+    cpqHeFltTolPowerSupplyRedundantPartner OBJECT-TYPE
+        SYNTAX  INTEGER
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "This specifies the index of the redundant partner. A value
+            of zero will be used if there is no redundant partner."
+        ::= { cpqHeFltTolPowerSupplyEntry 17 }
+
+
+
+-- ****************************************************************************
+--   Health MIB Integrated Remote Console (IRC) Group
+--   ================================================
+-- 
+-- The compaq enterprise               (1.3.6.1.4.1.232)
+--      cpqHealth Group                (1.3.6.1.4.1.232.6)
+--       cpqHeComponent Group          (1.3.6.1.4.1.232.6.2)
+--        cpqHeIRC Group               (1.3.6.1.4.1.232.6.2.10)
+--
+--  The cpqHeIRC group contains management information about the Integrated
+--  Remote Console ASIC.
+--
+--  Implementation of the cpqHeIRC group is mandatory for all agents that
+--  support the Server Health MIB.
+--
+-- ****************************************************************************
+
+    cpqHeIRCStatus OBJECT-TYPE
+        SYNTAX INTEGER {
+            unknown(1),
+            notavailable(2),
+            disabled(3),
+            enabled(4)
+            }
+        ACCESS read-only
+        STATUS mandatory
+        DESCRIPTION
+            "The status of the Integrated Remote Console.  A value of notavailable
+             will be returned if this system does not contain IRC."
+
+        ::= { cpqHeIRC 1 }
+
+-- ****************************************************************************
+--   Health MIB System Event Log Group
+--   =================================
+--
+-- The compaq enterprise               (1.3.6.1.4.1.232)
+--      cpqHealth Group                (1.3.6.1.4.1.232.6)
+--       cpqHeComponent Group          (1.3.6.1.4.1.232.6.2)
+--        cpqHeEventLog Group          (1.3.6.1.4.1.232.6.2.11)
+--
+--  The cpqHeEventLog group describes the health system event log.
+--
+--  Implementation of the cpqHeEventLog group is mandatory for all
+--  agents that support the Server Health MIB.
+--
+-- ****************************************************************************
+
+    cpqHeEventLogSupported OBJECT-TYPE
+        SYNTAX  INTEGER {
+            other(1),
+            notSupported(2),
+            supported(3),
+            clear(4)             -- Settable value to clear the log
+            }
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+            "This value specifies if this system supports the Integrated
+            Management Log feature.
+
+            An SNMP set of the value clear(4) will clear the System Event
+            Log of all entries."
+        ::= { cpqHeEventLog 1 }
+
+    cpqHeEventLogCondition OBJECT-TYPE
+        SYNTAX  INTEGER {
+            other(1),
+            ok(2),
+            degraded(3),
+            failed(4)
+            }
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "This value specifies the overall condition of the Integrated
+            Management Log feature."
+        ::= { cpqHeEventLog 2 }
+
+-- ****************************************************************************
+--   Health MIB System Event Log Table
+--   =================================
+--
+-- The compaq enterprise               (1.3.6.1.4.1.232)
+--      cpqHealth Group                (1.3.6.1.4.1.232.6)
+--       cpqHeComponent Group          (1.3.6.1.4.1.232.6.2)
+--        cpqHeEventLog Group          (1.3.6.1.4.1.232.6.2.11)
+--         cpqHeEventLogTable          (1.3.6.1.4.1.232.6.2.11.3)
+--
+-- ****************************************************************************
+
+    cpqHeEventLogTable OBJECT-TYPE
+        SYNTAX  SEQUENCE OF CpqHeEventLogEntry
+        ACCESS  not-accessible
+        STATUS  mandatory
+        DESCRIPTION
+            "A table of System Event Log Entries."
+        ::= { cpqHeEventLog 3 }
+
+    cpqHeEventLogEntry OBJECT-TYPE
+        SYNTAX  CpqHeEventLogEntry
+        ACCESS  not-accessible
+        STATUS  mandatory
+        DESCRIPTION
+            "A System Event Log Entry."
+        INDEX   { cpqHeEventLogEntryNumber }
+        ::= { cpqHeEventLogTable 1 }
+
+    CpqHeEventLogEntry ::= SEQUENCE {
+        cpqHeEventLogEntryNumber         INTEGER,
+        cpqHeEventLogEntrySeverity       INTEGER,
+        cpqHeEventLogEntryClass          INTEGER,
+        cpqHeEventLogEntryCode           INTEGER,
+        cpqHeEventLogEntryCount          INTEGER,
+        cpqHeEventLogInitialTime         OCTET STRING,
+        cpqHeEventLogUpdateTime          OCTET STRING,
+        cpqHeEventLogErrorDesc           DisplayString,
+        cpqHeEventLogFreeFormData        OCTET STRING
+    }
+
+    cpqHeEventLogEntryNumber OBJECT-TYPE
+        SYNTAX  INTEGER
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "A number that uniquely specifies this system event log
+            entry."
+        ::= { cpqHeEventLogEntry 1 }
+
+    cpqHeEventLogEntrySeverity OBJECT-TYPE
+        SYNTAX  INTEGER {
+            informational(2),   -- informational with no action required
+            infoWithAlert(3),   -- informational but with LCD alert message
+            repaired(6),        -- corrective action taken
+            caution(9),         -- non-fatal error condition
+            critical(15)        -- component failure
+            }
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+            "This value specifies the severity of the event log entry.
+            A caution or critical entry can have it's severity 
+            lowered by setting this variable to the repaired state."
+        ::= { cpqHeEventLogEntry 2 }
+
+    cpqHeEventLogEntryClass OBJECT-TYPE
+        SYNTAX  INTEGER
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "This value specifies the event log entry class designation."
+        ::= { cpqHeEventLogEntry 3 }
+
+    cpqHeEventLogEntryCode OBJECT-TYPE
+        SYNTAX  INTEGER
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "This value specifies the event log entry code designation.
+            The meaning of this changes depending on the class."
+        ::= { cpqHeEventLogEntry 4 }
+
+    cpqHeEventLogEntryCount OBJECT-TYPE
+        SYNTAX  INTEGER
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "This value specifies the event log entry occurrence count.
+            This represents the number of times this event has occurred
+            starting from the initial time until the last modified time."
+        ::= { cpqHeEventLogEntry 5 }
+
+    cpqHeEventLogInitialTime OBJECT-TYPE
+        SYNTAX  OCTET STRING (SIZE (6))
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "The time stamp when the event log entry was first created.
+
+             field  octets  contents                  range
+             =====  ======  ========                  =====
+               1      1-2   year                      0..65536
+               2       3    month                     1..12
+               3       4    day                       1..31
+               4       5    hour                      0..23
+               5       6    minute                    0..59
+
+            The year field is set with the most significant octet first.
+            A value of 0 in the year indicates an unknown time stamp."
+        ::= { cpqHeEventLogEntry 6 }
+
+    cpqHeEventLogUpdateTime OBJECT-TYPE
+        SYNTAX  OCTET STRING (SIZE (6))
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "The time stamp when the event log entry was last modified.
+
+             field  octets  contents                  range
+             =====  ======  ========                  =====
+               1      1-2   year                      0..65536
+               2       3    month                     1..12
+               3       4    day                       1..31
+               4       5    hour                      0..23
+               5       6    minute                    0..59
+
+            The year field is set with the most significant octet first.
+            A value of 0 in the year indicates an unknown time stamp."
+        ::= { cpqHeEventLogEntry 7 }
+
+    cpqHeEventLogErrorDesc OBJECT-TYPE
+        SYNTAX  DisplayString (SIZE (0..255))
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "A text description of the event log entry."
+        ::= { cpqHeEventLogEntry 8 }
+
+    cpqHeEventLogFreeFormData OBJECT-TYPE
+        SYNTAX  OCTET STRING (SIZE (0..128))
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "This is the free form data associated with a particular
+            event."
+        ::= { cpqHeEventLogEntry 9 }
+
+-- ****************************************************************************
+--   Health MIB Management Display Group
+--   ===================================
+--
+-- The compaq enterprise               (1.3.6.1.4.1.232)
+--      cpqHealth Group                (1.3.6.1.4.1.232.6)
+--       cpqHeComponent Group          (1.3.6.1.4.1.232.6.2)
+--        cpqHeMgmtDisplay Group       (1.3.6.1.4.1.232.6.2.12)
+--
+-- **************************************************************************** 
+
+--  The cpqHeMgmtDisplay group maintains information about the Management
+--  Display device.
+--
+--  Implementation of the cpqHeTrap group is mandatory for agents that
+--  support the Server Health MIB.
+
+    cpqHeMgmtDisplayType OBJECT-TYPE
+        SYNTAX  INTEGER {
+            other(1),            -- Unknown device or could not be determined
+            none(2),             -- No Management display device
+            imd4x16(3),          -- IMD display (4 lines by 16 chars)
+            ocp1x16(4)           -- Digital OCP display (1 line by 16 chars)
+            }
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "This value specifies the type of Management Display device.
+            If a display device is available on the server, the type
+            will be set accordingly.  If no device is present, the value
+            will be set to none(2)."
+        ::= { cpqHeMgmtDisplay 1 }
+
+    cpqHeMgmtDisplayText OBJECT-TYPE
+        SYNTAX  DisplayString (SIZE (0..255))
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+            "The text to be written to the Management display device.
+
+            If this item is read, it may not accurately reflect what
+            is currently displayed."
+        ::= { cpqHeMgmtDisplay 2 }
+
+    cpqHeMgmtUID OBJECT-TYPE
+        SYNTAX  INTEGER {
+            other(1),            -- Unknown device or could not be determined
+            none(2),             -- No unit identifier device
+            ledOn(3),            -- Unit identifier LED is On
+            ledOff(4),           -- Unit identifier LED is Off
+            ledBlinking(5)       -- Unit identifier LED is Blinking
+            }
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+            "The Unit Identifier LED.
+
+            This value will be one of the following:
+
+            other(1)
+              The state of the LED could not be determined.  Setting the
+              LED state is not allowed.
+
+            none(2)
+              The LED is not present.  Setting LED state is not allowed.
+
+            ledOn(3)
+              The LED is present and ON.  The LED can be turned Off or Blinking
+              by setting the cpqHeMgmtUID to ledOff(4) or ledBlinking(5) respectively.
+
+            ledOff(4)
+              The LED is present and OFF.  The LED can be turned On or Blinking
+              by setting the cpqHeMgmtUID to ledOn(3) or ledBlinking(5) respectively.
+
+            ledBlinking(5)
+              The LED is present and is Blinking.  The LED can be turned On or Off
+              by setting the cpqHeMgmtUID to ledOn(3) or ledOff(4) respectively"
+        ::= { cpqHeMgmtDisplay 3 }
+
+-- ****************************************************************************
+--   Health MIB Power Converter Group
+--   ================================
+--
+-- The compaq enterprise               (1.3.6.1.4.1.232)
+--      cpqHealth Group                (1.3.6.1.4.1.232.6)
+--       cpqHeComponent Group          (1.3.6.1.4.1.232.6.2)
+--        cpqHePowerConverter Group    (1.3.6.1.4.1.232.6.2.13)
+--
+--  The cpqHePowerConverter group describes the power converter modules
+--  in the system.
+--
+--  Implementation of the cpqHePowerConverter group is mandatory for all
+--  agents that support the Server Health MIB.
+--
+-- ****************************************************************************
+
+    cpqHePowerConverterSupported OBJECT-TYPE
+        SYNTAX  INTEGER {
+            other(1),
+            notSupported(2),
+            supported(3)
+            }
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "This value specifies if this system supports reporting
+            power converter module information."
+        ::= { cpqHePowerConverter 1 }
+
+    cpqHePowerConverterCondition OBJECT-TYPE
+        SYNTAX  INTEGER {
+            other(1),
+            ok(2),
+            degraded(3),
+            failed(4)
+            }
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "This value specifies the overall condition of the power
+            converters modules in the system."
+        ::= { cpqHePowerConverter 2 }
+
+-- ****************************************************************************
+--   Health MIB Power Converter Table
+--   ================================
+--
+-- The compaq enterprise               (1.3.6.1.4.1.232)
+--      cpqHealth Group                (1.3.6.1.4.1.232.6)
+--       cpqHeComponent Group          (1.3.6.1.4.1.232.6.2)
+--        cpqHePowerConverter Group    (1.3.6.1.4.1.232.6.2.13)
+--         cpqHePowerConverterTable    (1.3.6.1.4.1.232.6.2.13.3)
+--
+-- ****************************************************************************
+
+    cpqHePowerConverterTable OBJECT-TYPE
+        SYNTAX  SEQUENCE OF CpqHePowerConverterEntry
+        ACCESS  not-accessible
+        STATUS  mandatory
+        DESCRIPTION
+            "A table of Power Converter Module Entries."
+        ::= { cpqHePowerConverter 3 }
+
+    cpqHePowerConverterEntry OBJECT-TYPE
+        SYNTAX  CpqHePowerConverterEntry
+        ACCESS  not-accessible
+        STATUS  mandatory
+        DESCRIPTION
+            "A Power Converter Module Entry."
+        INDEX   { cpqHePwrConvChassis, cpqHePwrConvIndex }
+        ::= { cpqHePowerConverterTable 1 }
+
+    CpqHePowerConverterEntry ::= SEQUENCE {
+        cpqHePwrConvChassis             INTEGER,
+        cpqHePwrConvIndex               INTEGER,
+        cpqHePwrConvPresent             INTEGER,
+        cpqHePwrConvSlot                INTEGER,
+        cpqHePwrConvSocket              INTEGER,
+        cpqHePwrConvRedundant           INTEGER,
+        cpqHePwrConvRedundantGroupId    INTEGER,
+        cpqHePwrConvCondition           INTEGER,
+        cpqHePwrConvHwLocation          DisplayString
+    }
+
+    cpqHePwrConvChassis OBJECT-TYPE
+        SYNTAX  INTEGER
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "The system chassis number containing the power converter
+            modules."
+        ::= { cpqHePowerConverterEntry 1 }
+
+    cpqHePwrConvIndex OBJECT-TYPE
+        SYNTAX  INTEGER
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "The Power Converter Module number to index within the chassis."
+        ::= { cpqHePowerConverterEntry 2 }
+
+    cpqHePwrConvPresent OBJECT-TYPE
+        SYNTAX  INTEGER {
+            other(1),
+            absent(2),
+            present(3)
+            } 
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "This specifies if the Power Converter Module described is
+            present in the system."
+        ::= { cpqHePowerConverterEntry 3 }
+
+    cpqHePwrConvSlot OBJECT-TYPE
+        SYNTAX  INTEGER
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "The Power Converter Module slot number within the chassis."
+        ::= { cpqHePowerConverterEntry 4 }
+
+    cpqHePwrConvSocket OBJECT-TYPE
+        SYNTAX  INTEGER
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "The Power Converter Module socket number within the slot."
+        ::= { cpqHePowerConverterEntry 5 }
+
+    cpqHePwrConvRedundant OBJECT-TYPE
+        SYNTAX  INTEGER {
+            other(1),
+            nonRedundant(2),
+            redundant(3)
+            }
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "This specifies if the Power Converter Module is redundant."
+        ::= { cpqHePowerConverterEntry 6 }
+
+    cpqHePwrConvRedundantGroupId OBJECT-TYPE
+        SYNTAX  INTEGER
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "The Power Converter Module group id.  A redundant set of
+            power converters will have the same group id."
+        ::= { cpqHePowerConverterEntry 7 }
+
+    cpqHePwrConvCondition OBJECT-TYPE
+        SYNTAX  INTEGER {
+            other(1),
+            ok(2),
+            degraded(3),
+            failed(4)
+            }
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "The Power Converter Module condition."
+        ::= { cpqHePowerConverterEntry 8 }
+
+    cpqHePwrConvHwLocation OBJECT-TYPE
+        SYNTAX  DisplayString (SIZE (0..255))
+        ACCESS  read-only
+        STATUS  optional
+        DESCRIPTION
+            "A text description of the hardware location, on complex
+             multi SBB hardware only, for the power converter.
+             A NULL string indicates that the hardware location could not
+             be determined or is irrelevant."
+        ::= { cpqHePowerConverterEntry 9 }
+
+-- ****************************************************************************
+--   Health MIB Advanced Memory Protection Group (formerly Resilient Memory)
+--   =======================================================================
+--
+-- The compaq enterprise               (1.3.6.1.4.1.232)
+--      cpqHealth Group                (1.3.6.1.4.1.232.6)
+--       cpqHeComponent Group          (1.3.6.1.4.1.232.6.2)
+--        cpqHeResilientMemory Group   (1.3.6.1.4.1.232.6.2.14)
+--
+--  The cpqHeResilientMemory group describes the Advanced Memory Protection
+--  sub-system in the server.
+--
+--  Implementation of the cpqHeResilientMemory group is mandatory for all
+--  Server Agents that support the Server Health MIB.
+--
+-- ****************************************************************************
+
+    cpqHeResilientMemTypeActive OBJECT-TYPE
+        SYNTAX  INTEGER {
+            other(1),
+            none(2),
+            onLineSpare(3),
+            mirrored(4),               -- deprecated
+            advancedEcc(5),
+            mirroredSingleBoard(6),
+            mirroredDualBoard(7),
+            xor(8),
+            lockStep(9)
+            }
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "This value specifies the type of Advanced Memory Protection fault
+            tolerance currently active on the system.
+
+            The following connection states are supported:
+
+            other(1)
+              The Advanced Memory Protection fault tolerance cannot be
+              determined by the Management Agent.  You may need to upgrade
+              your software.
+
+            none(2)
+              This system is not configured for Advanced Memory Protection
+              fault tolerance or Advanced Memory Protection is not available
+              on this system.
+
+            onLineSpare(3)
+              This system is configured for Online Spare Advanced Memory
+              Protection.
+
+            mirrored(4)
+              This system is configured for Mirrored Advanced Memory
+              Protection.
+
+            advancedECC(5)
+              This system is configured for the Advanced ECC type of
+              Advanced Memory Protection.
+
+            mirroredSingleBoard(6)
+              This system is configured for Mirrored Advanced Memory
+              Protection within a single memory board.
+
+            mirroredDualBoard(7)
+              This system is configured for Mirrored Advanced Memory
+              Protection within a dual memory board configuration. The
+              mirrored memory may be swapped with memory on the same
+              memory board or with memory on the second memory board.
+
+            xor(8)
+              This system is configured for Advanced Memory Protection
+              using the XOR engine.
+              
+            lockStep(9)
+              This system is configured for LockStep type of 
+              Advanced Memory Protection."
+        ::= { cpqHeResilientMemory 1 }
+
+    cpqHeResilientMemTypeAvailable OBJECT-TYPE
+        SYNTAX  INTEGER
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "This value specifies the type of Advanced Memory Protection
+            Fault Tolerance available on the system.
+
+            This is a collection of flags used to indicate the fault
+            Advanced Memory Protection options available. This integer
+            is a bitmap, with each bit indicating the availability of an
+            option. If the bit is set to 1, the option is available;
+            otherwise it is not. Multiple options are allowed.
+
+            NOTE:   bit 31 is the most significant bit, bit 0 is the least
+                    significant.
+
+                    Bit 31-7:  RESERVED (0)
+		    Bit 6:     LockStep
+                    Bit 5:     XOR
+                    Bit 4:     Mirrored Memory with dual memory boards
+                    Bit 3:     Mirrored Memory within a single memory board
+                    Bit 2:     Advanced ECC
+                    Bit 1:     Mirrored (deprecated)
+                    Bit 0:     Online Spare"
+        ::= { cpqHeResilientMemory 2 }
+
+    cpqHeResilientMemStatus OBJECT-TYPE
+        SYNTAX  INTEGER {
+            other(1),
+            notProtected(2),
+            protected(3),
+            degraded(4),
+            dimmEcc(5),
+            mirrorNoFaults(6),
+            mirrorWithFaults(7),
+            hotSpareNoFaults(8),
+            hotSpareWithFaults(9),
+            xorNoFaults(10),
+            xorWithFaults(11),
+            advancedEcc(12),
+            advancedEccWithFaults(13),            
+            lockStep(14),
+            lockStepWithFaults(15)            
+            }
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "This value specifies the current state of the Advanced
+            Memory Protection subsystem.
+
+            The following states are supported:
+
+            other(1)
+              The system does not support Advanced Memory Protection or the
+              status cannot be determined by the Management Agent.
+
+            notProtected(2)
+              This system supports Advanced Memory Protection but the
+              feature is disabled.
+
+            protected(3)
+              The system is protected by Advanced Memory Protection.
+
+            degraded(4)
+              The system was protected, but the Advanced Memory
+              Protection feature has been engaged.
+
+            dimmEcc(5)
+              The system is protected via DIMM ECC only.
+
+            mirrorNoFaults(6)
+              The system is protected by Advanced Memory Protection in the
+              mirrored mode.  No DIMM faults have been detected.
+
+            mirrorWithFaults(7)
+              The system is protected by Advanced Memory Protection in the
+              mirrored mode.  One or more DIMM faults have been detected.
+
+            hotSpareNoFaults(8)
+              The system is protected by Advanced Memory Protection in the
+              hot spare mode.  No DIMM faults have been detected.
+
+            hotSpareWithFaults(9)
+              The system is protected by Advanced Memory Protection in the
+              hot spare mode.  One or more DIMM faults have been detected.
+
+            xorNoFaults(10)
+              The system is protected by Advanced Memory Protection in the
+              XOR memory mode.  No DIMM faults have been detected.
+
+            xorWithFaults(11)
+              The system is protected by Advanced Memory Protection in the
+              XOR memory mode.  One or more DIMM faults have been detected.
+
+            advancedEcc(12)
+              The system is protected by Advanced Memory Protection in the
+              Advanced ECC mode.
+              
+            advancedEccWithFaults(13)
+              The system is protected by Advanced Memory Protection in the
+              Advanced ECC mode. One or more DIMM faults have been detected.
+
+            lockStep(14)
+              The system is protected by Advanced Memory Protection in the
+              Lock Step mode.
+              
+            localStepWithFaults(15)
+              The system is protected by Advanced Memory Protection in the
+              Lock Step mode. One or more DIMM faults have been detected."              
+        ::= { cpqHeResilientMemory 3 }
+
+    cpqHeResilientMemCondition OBJECT-TYPE
+        SYNTAX  INTEGER {
+            other(1),
+            ok(2),
+            degraded(3)
+            }
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "This value specifies the current condition of the Advanced
+            Memory Protection subsystem.
+
+            The following states are supported:
+
+            other(1)
+              The system does not support fault tolerant memory or the
+              state cannot be determined by the Management Agent.
+
+            ok(2)
+              This system is operating normally.
+
+            degraded(3)
+              The system is running in a degraded state because the
+              Advanced Memory Protection subsystem has been engaged."
+        ::= { cpqHeResilientMemory 4 }
+
+    cpqHeResilientMemHotPlug OBJECT-TYPE
+        SYNTAX  INTEGER {
+            other(1),
+            nonHotPluggable(2),
+            hotPluggable(3)
+            }
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "This value specifies the current condition of the Advanced
+            Memory Protection subsystem.
+
+            The following states are supported:
+
+            other(1)
+              The state could not be determined or the system does not
+              support Advanced Memory Protection.
+
+            nonHotPluggable(2)
+              The memory board or cartridge is not hot plug capable.
+
+            hotPluggable(3)
+              The memory board or cartridge is hot plug capable and can be
+              removed if the system is operating in a redundant state.  A
+              memory board or cartridge may be added to an empty bay."
+        ::= { cpqHeResilientMemory 5 }
+
+    cpqHeResilientMemOperatingSpeed OBJECT-TYPE
+        SYNTAX  INTEGER
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "This value specifies the current operating speed of the Advanced
+            Memory Protection subsystem in MHz.
+
+            If this system does not support Advanced Memory Protection or this
+            value cannot be determined, then a value of 0 will be returned."
+        ::= { cpqHeResilientMemory 6 }
+
+    cpqHeResilientMemOsMemSize OBJECT-TYPE
+        SYNTAX  INTEGER
+        ACCESS  read-only 
+        STATUS  mandatory
+        DESCRIPTION
+            "This value specifies the size of memory as seen by the Operating
+            System in MB (1 MB = 1048576 bytes).
+
+            If this system does not support Advanced Memory Protection or this
+            value cannot be determined, then a value of 0 will be returned."
+        ::= { cpqHeResilientMemory 7 }
+
+    cpqHeResilientMemTotalMemSize OBJECT-TYPE
+        SYNTAX  INTEGER
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "This value specifies the total size of memory including memory seen
+            by the Operating System and the memory used for spare, mirrored, or
+            RAID configurations in MB (1 MB = 1048576 bytes).
+
+            If this system does not support Advanced Memory Protection or this
+            value cannot be determined, then a value of 0 will be returned."
+        ::= { cpqHeResilientMemory 8 }
+
+    cpqHeResilientMemRivState OBJECT-TYPE
+        SYNTAX  INTEGER { 
+            other(1),
+            inactive(2),
+            rebuilding(3),
+            initializing(4),
+            verifying(5)
+            }
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "This value specifies the state of the Rebuild/Initialize/Verify
+            (RIV) engine of the Advanced Memory Protection sub-system.
+
+            The following states are supported:
+
+            other(1)
+              The system does not support Advanced Memory Protection or this
+              value cannot be determined,
+
+            inactive(2)
+              The RIV engine is idle.
+
+            rebuilding(3)
+              The RIV engine is rebuilding the XOR data.
+
+            initializing(4)
+              The RIV engine is initializing memory.
+
+            verifying(5)
+              The RIV engine is verifying memory integrity."
+        ::= { cpqHeResilientMemory 9 }
+
+-- ****************************************************************************
+--   Health MIB Advanced Memory Protection Board Group
+--   =================================================
+--
+-- The compaq enterprise               (1.3.6.1.4.1.232)
+--      cpqHealth Group                (1.3.6.1.4.1.232.6)
+--       cpqHeComponent Group          (1.3.6.1.4.1.232.6.2)
+--        cpqHeResilientMemory Group   (1.3.6.1.4.1.232.6.2.14)
+--         cpqHeResMemBoardTable       (1.3.6.1.4.1.232.6.2.14.10)
+--          cpqHeResMemBoardEntry      (1.3.6.1.4.1.232.6.2.14.10.1)
+--
+-- ****************************************************************************
+
+    cpqHeResMemBoardTable OBJECT-TYPE
+        SYNTAX  SEQUENCE OF CpqHeResMemBoardEntry
+        ACCESS  not-accessible
+        STATUS  mandatory
+        DESCRIPTION
+            "A table of memory board or cartridge descriptions in Advanced
+            Memory Protection systems."
+        ::= { cpqHeResilientMemory 10 }
+
+    cpqHeResMemBoardEntry OBJECT-TYPE
+        SYNTAX  CpqHeResMemBoardEntry
+        ACCESS  not-accessible
+        STATUS  mandatory
+        DESCRIPTION
+            "A memory board or cartridge description."
+        INDEX   { cpqHeResMemBoardSlotIndex }
+        ::= { cpqHeResMemBoardTable 1 }
+
+    CpqHeResMemBoardEntry ::= SEQUENCE {
+        cpqHeResMemBoardSlotIndex       INTEGER,
+        cpqHeResMemBoardOnlineStatus    INTEGER,
+        cpqHeResMemBoardErrorStatus     INTEGER,
+        cpqHeResMemBoardLocked          INTEGER,
+        cpqHeResMemBoardNumSockets      INTEGER,
+        cpqHeResMemBoardOsMemSize       INTEGER,
+        cpqHeResMemBoardTotalMemSize    INTEGER,
+        cpqHeResMemBoardCondition       INTEGER,
+        cpqHeResMemBoardHotPlug         INTEGER
+    }
+
+    cpqHeResMemBoardSlotIndex OBJECT-TYPE
+        SYNTAX  INTEGER
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "The slot in which the memory board or cartridge is installed."
+        ::= { cpqHeResMemBoardEntry 1 }
+
+    cpqHeResMemBoardOnlineStatus OBJECT-TYPE
+        SYNTAX  INTEGER {
+            other(1),
+            present(2),
+            absent(3)
+        }
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "The online status of the Advanced Memory Protection board or
+            cartridge.
+
+            The following status values are supported:
+
+                 other(1)
+                   The value is unsupported or could not be determined.
+
+                 present(2)
+                   The board or cartridge has memory and is currently online.
+
+                 absent(3)
+                   The board or cartridge is missing or offline."
+        ::= { cpqHeResMemBoardEntry 2 }
+
+    cpqHeResMemBoardErrorStatus OBJECT-TYPE
+        SYNTAX  INTEGER {
+            other(1),
+            noError(2),
+            dimmEccError(3),
+            unlockError(4),
+            configError(5),
+            busError(6),
+            powerError(7),
+            advancedEcc(8),
+            onlineSpare(9),
+            mirrored(10),
+            mirroredDimmError(11),
+            memoryRaid(12),
+            raidDimmError(13),
+            lockstep(14),
+            lockstepDimmError(15)
+        }
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "The error status of the Advanced Memory Protection board or
+            cartridge.
+
+            The following status values are supported:
+
+                 other(1)
+                   The value is unsupported or could not be determined.
+
+                 noError(2)
+                   The board or cartridge is configured and operating correctly.
+
+                 dimmEccError(3)
+                   The board or cartridge has at least one DIMM ECC error.
+
+                 unlockError(4)
+                   The board or cartridge is unlocked when it should not be.
+                   Please insure the board of cartridge is locked.
+
+                 configError(5)
+                   The board or cartridge has a bad memory configuration.
+                   Please insure all memory modules are of the correct type,
+                   speed, latency, etc.
+
+                 busError(6)
+                   The board or cartridge has a memory bus error.
+                   Please insure all memory modules are of the correct type,
+                   speed, latency, etc.  Also insure the cartridge is inserted
+                   properly.
+
+                 powerError(7)
+                   The board or cartridge has power error.
+                   Please insure all memory modules are of the correct type,
+                   speed, latency, etc.  Also insure the cartridge is inserted
+                   properly.
+
+                 advancedEcc(8),
+                   The board or cartridge is configured for advanced Ecc mode.
+
+                 onlineSpare(9),
+                   The board or cartridge is configured for Online Spare mode.
+
+                 mirrored(10),
+                   The board or cartridge is configured for mirrored mode.
+
+                 mirroredDimmError(11),
+                   The board or cartridge has a mirrored Dimm error.
+
+                 memoryRaid(12),
+                   The board or cartridge is configured for memory raid mode.
+
+                 raidDimmError(13)
+                   The board or cartridge has a raid Dimm error.
+                   
+                 lockstep(14)
+                   The board or cartridge is configured for LockStep.
+                   
+                 lockstepDimmError(15)
+                   The board or cartridge has a lockStep Dimm error."
+        ::= { cpqHeResMemBoardEntry 3 }
+
+    cpqHeResMemBoardLocked OBJECT-TYPE
+        SYNTAX  INTEGER {
+            other(1),
+            unlocked(2),
+            locked(3)
+        }
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "The locked state of the Advanced Memory Protection board or
+            cartridge.
+
+            The following status values are supported:
+
+                 other(1)
+                   The value is unsupported or could not be determined.  If the
+                   system does not support hot plugging of the board or
+                   cartridge, then this value will be returned.
+
+                 unlocked(2)
+                   The board or cartridge is currently unlocked and may be
+                   removed.
+
+                 locked(3)
+                   The board or cartridge is currently locked and may not be
+                   removed."
+        ::= { cpqHeResMemBoardEntry 4 }
+
+    cpqHeResMemBoardNumSockets OBJECT-TYPE
+        SYNTAX  INTEGER
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "The total number of memory sockets for this memory board or
+            cartridge.
+
+            If this value could not be determined, or if the board or
+            cartridge has been removed, this value will be -1."
+        ::= { cpqHeResMemBoardEntry 5 }
+
+    cpqHeResMemBoardOsMemSize OBJECT-TYPE
+        SYNTAX  INTEGER
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "This value specifies the size of memory for this board or
+            cartridge as seen by the Operating System in MB (1 MB =
+            1048576 bytes).
+
+            If this system does not support Advanced Memory Protection or this
+            value cannot be determined, then a value of 0 will be returned."
+        ::= { cpqHeResMemBoardEntry 6 }
+
+    cpqHeResMemBoardTotalMemSize OBJECT-TYPE
+        SYNTAX  INTEGER
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "This value specifies the size of memory for this board or
+            cartridge including memory seen by the Operating System and
+            the memory used for spare, mirrored, or XOR configurations
+            in MB (1 MB = 1048576 bytes).
+
+            If this system does not support Advanced Memory Protection or this
+            value cannot be determined, then a value of 0 will be returned."
+        ::= { cpqHeResMemBoardEntry 7 }
+
+    cpqHeResMemBoardCondition OBJECT-TYPE
+        SYNTAX  INTEGER {
+            other(1),
+            ok(2),
+            degraded(3)
+        }
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+             "This provides the current status of the Advanced Memory
+              Protection memory board or cartridge.
+
+              The following status values are supported:
+
+                 other(1):
+                   The condition of this memory board or cartridge
+                   could not be determined.
+
+                 ok(2):
+                   The memory board or cartridge is operating normally.
+
+                 degraded(3):
+                   The memory board or cartridge is in an error state.
+                   Check for correct memory installation and that the
+                   board has been inserted properly."
+        ::= { cpqHeResMemBoardEntry 8 }
+
+    cpqHeResMemBoardHotPlug OBJECT-TYPE
+        SYNTAX  INTEGER {
+            other(1),
+            nonHotPluggable(2),
+            hotPluggable(3)
+            }
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "This indicates if the memory board is capable of being
+            removed and/or inserted while the system is in an
+            operational state.
+
+            The following states are supported:
+
+            other(1)
+              The state could not be determined or the system does not
+              support Advanced Memory Protection.
+
+            nonHotPluggable(2)
+              The memory board or cartridge is not hot plug capable.
+
+            hotPluggable(3)
+              The memory board or cartridge is hot plug capable and can be
+              removed if the system is operating in a redundant state.  A
+              memory board or cartridge may be added to an empty bay."
+        ::= { cpqHeResMemBoardEntry 9 }
+
+-- ****************************************************************************
+--   Health MIB Advanced Memory Protection Memory Module Group
+--   =========================================================
+--
+-- The compaq enterprise               (1.3.6.1.4.1.232)
+--      cpqHealth Group                (1.3.6.1.4.1.232.6)
+--       cpqHeComponent Group          (1.3.6.1.4.1.232.6.2)
+--        cpqHeResilientMemory Group   (1.3.6.1.4.1.232.6.2.14)
+--         cpqHeResMemModuleTable      (1.3.6.1.4.1.232.6.2.14.11)
+--          cpqHeResMemModuleEntry     (1.3.6.1.4.1.232.6.2.14.11.1)
+--
+-- ****************************************************************************
+
+    cpqHeResMemModuleTable OBJECT-TYPE
+        SYNTAX  SEQUENCE OF CpqHeResMemModuleEntry
+        ACCESS  not-accessible
+        STATUS  mandatory
+        DESCRIPTION
+            "A table of memory module descriptions."
+        ::= { cpqHeResilientMemory 11 }
+
+    cpqHeResMemModuleEntry OBJECT-TYPE
+        SYNTAX  CpqHeResMemModuleEntry
+        ACCESS  not-accessible
+        STATUS  mandatory 
+        DESCRIPTION
+            "A memory module description."
+        INDEX   { cpqHeResMemBoardIndex, cpqHeResMemModuleIndex }
+        ::= { cpqHeResMemModuleTable 1 }
+
+    CpqHeResMemModuleEntry ::= SEQUENCE {
+        cpqHeResMemBoardIndex            INTEGER,
+        cpqHeResMemModuleIndex           INTEGER,
+        cpqHeResMemModuleSparePartNo     DisplayString,
+        cpqHeResMemModuleStatus          INTEGER,
+        cpqHeResMemModuleCondition       INTEGER,
+        cpqHeResMemModuleSpd             OCTET STRING
+    }
+
+    cpqHeResMemBoardIndex OBJECT-TYPE
+        SYNTAX  INTEGER
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "The slot in which the memory board or cartridge is installed.
+
+            A value of 0 indicates memory installed directly on the
+            system board."
+        ::= { cpqHeResMemModuleEntry 1 }
+
+    cpqHeResMemModuleIndex OBJECT-TYPE
+        SYNTAX  INTEGER
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "The memory module number."
+        ::= { cpqHeResMemModuleEntry 2 }
+
+    cpqHeResMemModuleSparePartNo OBJECT-TYPE
+        SYNTAX  DisplayString (SIZE (0..32))
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+             "The memory module's manufacturer part number.
+
+              This field will be a null (size 0) string if the manufacturer
+              part number is not available."
+        ::= { cpqHeResMemModuleEntry 3 }
+
+    cpqHeResMemModuleStatus OBJECT-TYPE
+        SYNTAX  INTEGER {
+            other(1),
+            notPresent(2),
+            present(3),
+            good(4),
+            add(5),
+            upgrade(6),
+            missing(7),
+            doesNotMatch(8),
+            notSupported(9),
+            badConfig(10),
+            degraded(11)
+        }
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+             "This provides the current status of the correctable memory
+              errors for this memory module.
+
+              The following status values are supported:
+
+                 other(1):
+                   The status is unknown or could not be determined.
+
+                 notPresent(2):
+                   The memory module is not present or is un-initialized.
+
+                 present(3):
+                   The memory module is present but not in use.
+
+                 good(4):
+                   The memory module is present and in use.  The corrected
+                   error threshold has not been exceeded.
+
+                 add(5):
+                   The memory module has been added, but is not yet in use.
+
+                 upgraded(6):
+                   The memory module has been upgraded, but the memory is not
+                   yet in use.
+
+                 missing(7):
+                   An expected memory module is missing.
+
+                 doesNotMatch(8):
+                   The memory module does not match the other memory modules
+                   within the bank.
+
+                 notSupported(9):
+                   The memory module is not supported.
+
+                 badConfig(10):
+                   The memory module violates the add/upgrade configuration
+                   rules.
+
+                 degraded(11):
+                   The memory module's correctable error count has exceeded
+                   threshold."
+        ::= { cpqHeResMemModuleEntry 4 }
+
+    cpqHeResMemModuleCondition OBJECT-TYPE
+        SYNTAX  INTEGER {
+            other(1),
+            ok(2),
+            degraded(3)
+        }
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+             "This provides the current status of the correctable memory
+              errors for this memory module.
+
+              The following status values are supported:
+
+                 other(1):
+                   ECC is not supported on this memory module or the
+                   condition could not be determined.
+
+                 ok(2):
+                   The memory module is operating normally.
+
+                 degraded(3):
+                   The memory module is correctable error count has exceeded
+                   threshold or a configuration error has been detected."
+        ::= { cpqHeResMemModuleEntry 5 }
+
+    cpqHeResMemModuleSpd OBJECT-TYPE
+        SYNTAX  OCTET STRING (SIZE (0..256))
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "This is the raw Serial Presence Detect information contained
+            in the memory module.
+
+            If the SPD information is not available, this item will be empty."
+        ::= { cpqHeResMemModuleEntry 6 }
+
+-- ****************************************************************************
+--   Health MIB Advanced Memory Protection Board Group
+--   =================================================
+--
+-- The compaq enterprise               (1.3.6.1.4.1.232)
+--      cpqHealth Group                (1.3.6.1.4.1.232.6)
+--       cpqHeComponent Group          (1.3.6.1.4.1.232.6.2)
+--        cpqHeResilientMemory Group   (1.3.6.1.4.1.232.6.2.14)
+--         cpqHeResMem2BoardTable       (1.3.6.1.4.1.232.6.2.14.12)
+--          cpqHeResMem2BoardEntry      (1.3.6.1.4.1.232.6.2.14.12.1)
+--
+-- ****************************************************************************
+
+    cpqHeResMem2BoardTable OBJECT-TYPE
+        SYNTAX  SEQUENCE OF CpqHeResMem2BoardEntry
+        ACCESS  not-accessible
+        STATUS  mandatory
+        DESCRIPTION
+            "A table of memory board or cartridge descriptions in Advanced
+            Memory Protection systems."
+        ::= { cpqHeResilientMemory 12 }
+
+    cpqHeResMem2BoardEntry OBJECT-TYPE
+        SYNTAX  CpqHeResMem2BoardEntry
+        ACCESS  not-accessible
+        STATUS  mandatory
+        DESCRIPTION
+            "A memory board or cartridge or CPU based Memory Board description."
+        INDEX   { cpqHeResMem2BoardIndex }
+        ::= { cpqHeResMem2BoardTable 1 }
+
+    CpqHeResMem2BoardEntry ::= SEQUENCE {
+        cpqHeResMem2BoardIndex       INTEGER,
+        cpqHeResMem2BoardSlotNum       INTEGER,
+        cpqHeResMem2BoardCpuNum       INTEGER,
+        cpqHeResMem2BoardRiserNum       INTEGER,
+        cpqHeResMem2BoardOnlineStatus    INTEGER,
+        cpqHeResMem2BoardErrorStatus     INTEGER,
+        cpqHeResMem2BoardLocked          INTEGER,
+        cpqHeResMem2BoardNumSockets      INTEGER,
+        cpqHeResMem2BoardOsMemSize       INTEGER,
+        cpqHeResMem2BoardTotalMemSize    INTEGER,
+        cpqHeResMem2BoardCondition       INTEGER,
+        cpqHeResMem2BoardHotPlug         INTEGER
+    }
+
+    cpqHeResMem2BoardIndex OBJECT-TYPE
+        SYNTAX  INTEGER
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "This will represent the unique memory board or cartridge or riser."
+        ::= { cpqHeResMem2BoardEntry 1 }
+
+
+    cpqHeResMem2BoardSlotNum OBJECT-TYPE
+        SYNTAX  INTEGER
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "The slot in which the memory board or cartridge is installed."
+        ::= { cpqHeResMem2BoardEntry 2 }
+
+    cpqHeResMem2BoardCpuNum OBJECT-TYPE
+        SYNTAX  INTEGER
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "The Processor Number to which the memory Riser belongs. Value 0 means memory is not CPU based."
+        ::= { cpqHeResMem2BoardEntry 3 }
+
+    cpqHeResMem2BoardRiserNum OBJECT-TYPE
+        SYNTAX  INTEGER
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "The Riser Number on the Processor."
+        ::= { cpqHeResMem2BoardEntry 4 }
+
+    cpqHeResMem2BoardOnlineStatus OBJECT-TYPE
+        SYNTAX  INTEGER {
+            other(1),
+            present(2),
+            absent(3)
+        }
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "The online status of the Advanced Memory Protection board or 
+              cartridge or riser.
+
+            The following status values are supported:
+
+                 other(1)
+                   The value is unsupported or could not be determined.
+
+                 present(2)
+                   The board or cartridge or riser has memory and is currently online.
+
+                 absent(3)
+                   The board or cartridge or riser is missing or offline."
+        ::= { cpqHeResMem2BoardEntry 5 }
+
+    cpqHeResMem2BoardErrorStatus OBJECT-TYPE
+        SYNTAX  INTEGER {
+            other(1),
+            noError(2),
+            dimmEccError(3),
+            unlockError(4),
+            configError(5),
+            busError(6),
+            powerError(7),
+            advancedEcc(8),
+            onlineSpare(9),
+            mirrored(10),
+            mirroredDimmError(11),
+            memoryRaid(12),
+            raidDimmError(13),
+            lockStep(14),
+            lockStepError(15)
+        }
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "The error status of the Advanced Memory Protection board or
+            Cartridge or riser.
+
+            The following status values are supported:
+
+                 other(1)
+                   The value is unsupported or could not be determined.
+
+                 noError(2)
+                   The board or cartridge or riser is configured and operating correctly.
+
+                 dimmEccError(3)
+                   The board or cartridge or riser has at least one DIMM ECC error.
+
+                 unlockError(4)
+                   The board or cartridge or riser is unlocked when it should not be.
+                   Please insure the board of cartridge is locked.
+
+                 configError(5)
+                   The board or cartridge or riser has a bad memory configuration.
+                   Please insure all memory modules are of the correct type,
+                   speed, latency, etc.
+
+                 busError(6)
+                   The board or cartridge or riser has a memory bus error.
+                   Please insure all memory modules are of the correct type,
+                   speed, latency, etc.  Also insure the cartridge is inserted
+                   properly.
+
+                 powerError(7)
+                   The board or cartridge or riser has power error.
+                   Please insure all memory modules are of the correct type,
+                   speed, latency, etc.  Also insure the cartridge is inserted
+                   properly.
+
+                 advancedEcc(8),
+                   The board or cartridge or riser is configured for advanced Ecc mode.
+
+                 onlineSpare(9),
+                   The board or cartridge or riser is configured for Online Spare mode.
+
+                 mirrored(10),
+                   The board or cartridge or riser is configured for mirrored mode.
+
+                 mirroredDimmError(11),
+                   The board or cartridge or riser has a mirrored Dimm error.
+
+                 memoryRaid(12),
+                   The board or cartridge or riser is configured for memory raid mode.
+
+                 raidDimmError(13)
+                   The board or cartridge or riser has a raid Dimm error.
+
+                 lockStep(14),
+                   The board or cartridge or riser is configured for lockStep mode.
+
+                 lockStepError(15)
+                   The board or cartridge or riser has a lockStep Dimm error."
+        ::= { cpqHeResMem2BoardEntry 6 }
+
+    cpqHeResMem2BoardLocked OBJECT-TYPE
+        SYNTAX  INTEGER {
+            other(1),
+            unlocked(2),
+            locked(3)
+        }
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "The locked state of the Advanced Memory Protection board or
+            Cartridge or riser.
+
+            The following status values are supported:
+
+                 other(1)
+                   The value is unsupported or could not be determined.  If the
+                   system does not support hot plugging of the board or
+                   cartridge or riser, then this value will be returned.
+
+                 unlocked(2)
+                   The board or cartridge or riser is currently unlocked and may be
+                   removed.
+
+                 locked(3)
+                   The board or cartridge or riser is currently locked and may not be
+                   removed."
+        ::= { cpqHeResMem2BoardEntry 7 }
+
+    cpqHeResMem2BoardNumSockets OBJECT-TYPE
+        SYNTAX  INTEGER
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "The total number of memory sockets for this memory board or
+            Cartridge or riser.
+
+            If this value could not be determined, or if the board or
+            Cartridge or riser has been removed, this value will be -1."
+        ::= { cpqHeResMem2BoardEntry 8 }
+
+    cpqHeResMem2BoardOsMemSize OBJECT-TYPE
+        SYNTAX  INTEGER
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "This value specifies the size of memory for this board or
+            cartridge or riser as seen by the Operating System in MB (1 MB =
+            1048576 bytes).
+
+            If this system does not support Advanced Memory Protection or this
+            value cannot be determined, then a value of 0 will be returned."
+        ::= { cpqHeResMem2BoardEntry 9 }
+
+    cpqHeResMem2BoardTotalMemSize OBJECT-TYPE
+        SYNTAX  INTEGER
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "This value specifies the size of memory for this board or
+            Cartridge or riser including memory seen by the Operating System and
+            the memory used for spare, mirrored, or XOR configurations
+            in MB (1 MB = 1048576 bytes).
+
+            If this system does not support Advanced Memory Protection or this
+            value cannot be determined, then a value of 0 will be returned."
+        ::= { cpqHeResMem2BoardEntry 10 }
+
+    cpqHeResMem2BoardCondition OBJECT-TYPE
+        SYNTAX  INTEGER {
+            other(1),
+            ok(2),
+            degraded(3)
+        }
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+             "This provides the current status of the Advanced Memory
+              Protection memory board or cartridge or riser.
+
+              The following status values are supported:
+
+                 other(1):
+                   The condition of this memory board or cartridge or riser
+                   could not be determined.
+
+                 ok(2):
+                   The memory board or cartridge or riser is operating normally.
+
+                 degraded(3):
+                   The memory board or cartridge or riser is in an error state.
+                   Check for correct memory installation and that the
+                   board has been inserted properly."
+        ::= { cpqHeResMem2BoardEntry 11 }
+
+    cpqHeResMem2BoardHotPlug OBJECT-TYPE
+        SYNTAX  INTEGER {
+            other(1),
+            nonHotPluggable(2),
+            hotPluggable(3)
+            }
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "This indicates if the memory board is capable of being
+            removed and/or inserted while the system is in an
+            operational state.
+
+            The following states are supported:
+
+            other(1)
+              The state could not be determined or the system does not
+              support Advanced Memory Protection.
+
+            nonHotPluggable(2)
+              The memory board or cartridge or riser is not hot plug capable.
+
+            hotPluggable(3)
+              The memory board or cartridge or riser is hot plug capable and can be
+              removed if the system is operating in a redundant state.  A
+              memory board or cartridge or riser may be added to an empty bay."
+        ::= { cpqHeResMem2BoardEntry 12}
+
+-- ****************************************************************************
+--   Health MIB Advanced Memory Protection Memory Module Group
+--   =========================================================
+--
+-- The compaq enterprise               (1.3.6.1.4.1.232)
+--      cpqHealth Group                (1.3.6.1.4.1.232.6)
+--       cpqHeComponent Group          (1.3.6.1.4.1.232.6.2)
+--        cpqHeResilientMemory Group   (1.3.6.1.4.1.232.6.2.14)
+--         cpqHeResMem2ModuleTable     (1.3.6.1.4.1.232.6.2.14.13)
+--          cpqHeResMem2ModuleEntry     (1.3.6.1.4.1.232.6.2.14.13.1)
+--
+-- ****************************************************************************
+
+    cpqHeResMem2ModuleTable OBJECT-TYPE
+        SYNTAX  SEQUENCE OF CpqHeResMem2ModuleEntry
+        ACCESS  not-accessible
+        STATUS  mandatory
+        DESCRIPTION
+            "A table of memory module descriptions."
+        ::= { cpqHeResilientMemory 13 }
+
+    cpqHeResMem2ModuleEntry OBJECT-TYPE
+        SYNTAX  CpqHeResMem2ModuleEntry
+        ACCESS  not-accessible
+        STATUS  mandatory 
+        DESCRIPTION
+            "A memory module description."
+        INDEX   { cpqHeResMem2Module }
+        ::= { cpqHeResMem2ModuleTable 1 }
+
+    CpqHeResMem2ModuleEntry ::= SEQUENCE {
+        cpqHeResMem2Module            INTEGER,
+        cpqHeResMem2BoardNum            INTEGER,
+        cpqHeResMem2CpuNum            INTEGER,
+        cpqHeResMem2RiserNum            INTEGER,
+        cpqHeResMem2ModuleNum            INTEGER,
+        cpqHeResMem2ModuleSize            INTEGER,
+        cpqHeResMem2ModuleType            INTEGER,
+        cpqHeResMem2ModuleTechnology      INTEGER,
+        cpqHeResMem2ModuleManufacturer    DisplayString,
+        cpqHeResMem2ModulePartNo          DisplayString,
+        cpqHeResMem2ModuleDate            OCTET STRING,
+        cpqHeResMem2ModuleSerialNo        DisplayString,
+        cpqHeResMem2ModuleHwLocation      DisplayString,
+        cpqHeResMem2ModuleFrequency       INTEGER,
+        cpqHeResMem2ModuleCellTablePtr    INTEGER,
+        cpqHeResMem2ModuleCellStatus      INTEGER,
+        cpqHeResMem2ModulePartNoMfgr      DisplayString,
+        cpqHeResMem2ModuleSerialNoMfgr    DisplayString,
+        cpqHeResMem2ModuleStatus          INTEGER,
+        cpqHeResMem2ModuleCondition       INTEGER,
+        cpqHeResMem2ModuleSpd             OCTET STRING
+    }
+
+    cpqHeResMem2Module OBJECT-TYPE
+        SYNTAX  INTEGER
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "This will represent the unique memory DIMM on 
+              memory board or cartridge or riser. "
+        ::= { cpqHeResMem2ModuleEntry 1 }
+
+    cpqHeResMem2BoardNum OBJECT-TYPE
+        SYNTAX  INTEGER
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "The slot in which the memory board or cartridge is installed.
+
+            A value of 0 indicates memory installed directly on the
+            system board."
+        ::= { cpqHeResMem2ModuleEntry 2 }
+
+    cpqHeResMem2CpuNum OBJECT-TYPE
+        SYNTAX  INTEGER
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "The memory module CPU number. Value 0 means memory is not Processor based."
+        ::= { cpqHeResMem2ModuleEntry 3 }
+
+    cpqHeResMem2RiserNum OBJECT-TYPE
+        SYNTAX  INTEGER
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "The memory module rasier number."
+        ::= { cpqHeResMem2ModuleEntry 4 }
+
+    cpqHeResMem2ModuleNum OBJECT-TYPE
+        SYNTAX  INTEGER
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "The memory module number."
+        ::= { cpqHeResMem2ModuleEntry 5 }
+
+    cpqHeResMem2ModuleSize OBJECT-TYPE
+        SYNTAX  INTEGER (0..2147483647)
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "Module memory size in kilobytes.  A kilobyte of memory is
+            defined as 1024 bytes.
+
+            A size of 0 indicates the module is not present."
+        ::= { cpqHeResMem2ModuleEntry 6 }
+
+    cpqHeResMem2ModuleType OBJECT-TYPE 
+        SYNTAX  INTEGER {
+                other(1),
+                board(2),
+                cpqSingleWidthModule(3),
+                cpqDoubleWidthModule(4),
+                simm(5),
+                pcmcia(6),
+                compaq-specific(7), 
+                dimm(8),
+                smallOutlineDimm(9),
+                rimm(10),
+                srimm(11),
+                fb-dimm(12)
+             }
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "Type of memory module installed.  The value other(1) will be
+             given if the type is not known.  The value board(2) will be
+             given if the memory module is permanently mounted (not modular)
+             on a system board or memory expansion board."
+        ::= { cpqHeResMem2ModuleEntry 7 }
+
+    cpqHeResMem2ModuleTechnology OBJECT-TYPE
+        SYNTAX  INTEGER {
+                other(1),
+                fastPageMode(2),
+                edoPageMode(3),
+                burstEdoPageMode(4),
+                synchronous(5),
+                rdram(6)
+             }
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "Technology type of memory module installed.  The value other(1)
+             will be given if the technology is not known."
+        ::= { cpqHeResMem2ModuleEntry 8 }
+
+    cpqHeResMem2ModuleManufacturer OBJECT-TYPE
+        SYNTAX  DisplayString (SIZE (0..255))
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+             "The memory module's manufacturer name.
+
+              This field will be a null (size 0) string if the manufacturer
+              name is not available."
+        ::= { cpqHeResMem2ModuleEntry 9 }
+
+    cpqHeResMem2ModulePartNo OBJECT-TYPE
+        SYNTAX  DisplayString (SIZE (0..255))
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+             "The memory module's manufacturer part number.
+
+              This field will be a null (size 0) string if the manufacturer
+              part number is not available."
+        ::= { cpqHeResMem2ModuleEntry 10 }
+
+    cpqHeResMem2ModuleDate OBJECT-TYPE
+        SYNTAX  OCTET STRING (SIZE (7))
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+             "The memory module date of manufacture.
+
+             field  octets  contents                  range
+             =====  ======  ======================    ========
+               1     1-2    year                      0..65536
+               2       3    month                     1..12
+               3       4    day                       1..31
+               4       5    hour                      0..23
+               5       6    minute                    0..59
+               6       7    second                    0..60
+                           (use 60 for leap-second)
+
+             This field will be set to year = 0 if the date of manufacture
+             is not available.  The hour, minute, and second fields will
+             always be set to 0."
+        ::= { cpqHeResMem2ModuleEntry 11 }
+
+    cpqHeResMem2ModuleSerialNo OBJECT-TYPE
+        SYNTAX  DisplayString (SIZE (0..255))
+        ACCESS  read-write
+        STATUS  mandatory
+        DESCRIPTION
+             "The memory module's serial number.
+
+              This field will be a null (size 0) string if the serial number
+              is not available."
+        ::= { cpqHeResMem2ModuleEntry 12 }
+
+    cpqHeResMem2ModuleHwLocation OBJECT-TYPE
+        SYNTAX  DisplayString (SIZE (0..255))
+        ACCESS  read-only
+        STATUS  optional
+        DESCRIPTION
+            "A text description of the hardware location, on complex
+             multi SBB hardware only, for the memory module.
+             A NULL string indicates that the hardware location could not
+             be determined or is irrelevant."
+        ::= { cpqHeResMem2ModuleEntry 13 }
+
+
+    cpqHeResMem2ModuleFrequency OBJECT-TYPE
+        SYNTAX  INTEGER (0..65535)
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "The memory module frequency in MHz.  The value zero (0) will
+             be given if the module frequency cannot be determined."
+        ::= { cpqHeResMem2ModuleEntry 14 }
+
+    cpqHeResMem2ModuleCellTablePtr OBJECT-TYPE
+        SYNTAX  INTEGER (0..15)
+        ACCESS  read-only
+        STATUS  optional
+        DESCRIPTION
+            "Index for the cell in cpqSeCellTable where the memory board is
+             installed."
+        ::= { cpqHeResMem2ModuleEntry 15 }
+
+    cpqHeResMem2ModuleCellStatus OBJECT-TYPE
+        SYNTAX  INTEGER {
+            other(1),
+            ok(2),
+            deconfigured(3)
+        }
+        ACCESS  read-only
+        STATUS  optional
+        DESCRIPTION
+             "This provides the current status for this memory module.
+
+              The following status values are supported:
+
+                 other(1):
+                   The memory module status is not available
+
+                 ok(2):
+                   The memory module is active
+
+                 deconfigured(3):
+                   The memory module is not ready"
+        ::= { cpqHeResMem2ModuleEntry 16 }
+
+
+    cpqHeResMem2ModulePartNoMfgr OBJECT-TYPE
+        SYNTAX  DisplayString (SIZE (0..255))
+        ACCESS  read-only
+        STATUS  optional
+        DESCRIPTION
+             "The memory module's manufacturer's part number.
+
+              This field will be a null (size 0) string if the manufacturer
+              part number is not available."
+        ::= { cpqHeResMem2ModuleEntry 17 }
+
+    cpqHeResMem2ModuleSerialNoMfgr OBJECT-TYPE
+        SYNTAX  DisplayString (SIZE (0..255))
+        ACCESS  read-only
+        STATUS  optional
+        DESCRIPTION
+             "The memory module's manufacturer's serial number.
+
+              This field will be a null (size 0) string if the manufacturer
+              serial number is not available."
+        ::= { cpqHeResMem2ModuleEntry 18 }
+
+
+    cpqHeResMem2ModuleStatus OBJECT-TYPE
+        SYNTAX  INTEGER {
+            other(1),
+            notPresent(2),
+            present(3),
+            good(4),
+            add(5),
+            upgrade(6),
+            missing(7),
+            doesNotMatch(8),
+            notSupported(9),
+            badConfig(10),
+            degraded(11)
+        }
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+             "This provides the current status of the correctable memory
+              errors for this memory module.
+
+              The following status values are supported:
+
+                 other(1):
+                   The status is unknown or could not be determined.
+
+                 notPresent(2):
+                   The memory module is not present or is un-initialized.
+
+                 present(3):
+                   The memory module is present but not in use.
+
+                 good(4):
+                   The memory module is present and in use.  The corrected
+                   error threshold has not been exceeded.
+
+                 add(5):
+                   The memory module has been added, but is not yet in use.
+
+                 upgraded(6):
+                   The memory module has been upgraded, but the memory is not
+                   yet in use.
+
+                 missing(7):
+                   An expected memory module is missing.
+
+                 doesNotMatch(8):
+                   The memory module does not match the other memory modules
+                   within the bank.
+
+                 notSupported(9):
+                   The memory module is not supported.
+
+                 badConfig(10):
+                   The memory module violates the add/upgrade configuration
+                   rules.
+
+                 degraded(11):
+                   The memory module's correctable error count has exceeded
+                   threshold."
+        ::= { cpqHeResMem2ModuleEntry 19 }
+
+    cpqHeResMem2ModuleCondition OBJECT-TYPE
+        SYNTAX  INTEGER {
+            other(1),
+            ok(2),
+            degraded(3),
+            degradedModuleIndexUnknown(4)
+        }
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+             "This provides the current status of the correctable memory
+              errors for this memory module.
+
+              The following status values are supported:
+
+                 other(1):
+                   ECC is not supported on this memory module or the
+                   condition could not be determined.
+
+                 ok(2):
+                   The memory module is operating normally.
+
+                 degraded(3):
+                   The memory module is correctable error count has exceeded
+                   threshold or a configuration error has been detected.
+
+                 degradedModuleIndexUnknown(4):
+                   The correctable error count has exceeded threshold.
+                   The module number not available."
+        ::= { cpqHeResMem2ModuleEntry 20 }
+
+    cpqHeResMem2ModuleSpd OBJECT-TYPE
+        SYNTAX  OCTET STRING (SIZE (0..256))
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "This is the raw Serial Presence Detect information contained
+            in the memory module.
+
+            If the SPD information is not available, this item will be empty."
+        ::= { cpqHeResMem2ModuleEntry 21 }
+
+
+-- ****************************************************************************
+--   Health MIB Power Meter Group
+--   ========================================
+--
+-- The compaq enterprise               (1.3.6.1.4.1.232)
+--      cpqHealth Group                (1.3.6.1.4.1.232.6)
+--       cpqHeComponent Group          (1.3.6.1.4.1.232.6.2)
+--        cpqHePowerMeter Group        (1.3.6.1.4.1.232.6.2.15)
+--
+--  The cpqHePowerMeter group describes the Server's power consumption read
+--  
+--
+--  Implementation of the cpqHePowerMeter group is mandatory for all
+--  platform that support Power Meter.
+--
+-- ****************************************************************************
+
+    cpqHePowerMeterSupport OBJECT-TYPE
+        SYNTAX  INTEGER {
+            other(1), 
+            supported(2),
+            unsupported(3)            
+        }
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "This value specifies whether Power Meter is supported  
+             by this Server .
+
+             The following values are supported:
+
+             other(1)
+               Could not read the Power Meter status.
+
+             supported(2)
+               This system support Power Meter.
+
+             unsupported(3)
+               This system does not support Power Meter."
+        ::= { cpqHePowerMeter 1}
+
+
+    cpqHePowerMeterStatus OBJECT-TYPE
+        SYNTAX  INTEGER {
+            other(1), 
+            present(2),
+            absent(3)            
+        }
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            "This value specifies whether Power Meter reading is supported  
+             by this Server .
+
+             The following values are supported:
+
+             other(1)
+               Could not read the Power Meter status.
+
+             present(2)
+               The Power Meter data is available.
+
+             absent(3)
+               The Power Meter data is not available at this time."
+        ::= { cpqHePowerMeter 2}
+
+
+    cpqHePowerMeterCurrReading OBJECT-TYPE
+        SYNTAX  INTEGER
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            " This is the current Power Meter reading in Watts.
+              This value shows the most recent power reading if available. 
+              On systems without Power Meter support, this value will be -1."
+        ::= { cpqHePowerMeter 3 }
+
+    cpqHePowerMeterPrevReading OBJECT-TYPE
+        SYNTAX  INTEGER
+        ACCESS  read-only
+        STATUS  mandatory
+        DESCRIPTION
+            " This is the previous Power Meter reading in Watts. 
+              This value shows previous power reading if available. 
+              On systems without Power Meter support, this value will be -1."
+        ::= { cpqHePowerMeter 4 }
+
+
+
+-- ****************************************************************************
+--   HealthMIB Trap Group
+--   =====================
+--
+-- The compaq enterprise               (1.3.6.1.4.1.232)
+--      cpqHealth Group                (1.3.6.1.4.1.232.6)
+--       cpqHeTrap Group               (1.3.6.1.4.1.232.6.3)  (deprecated)
+--
+--  The cpqHeTrap group maintains information about the number of traps
+--  issued from the health enterprise.  The trap group also maintains a table
+--  of the last several traps issued.  This table is intended to give a
+--  management application some recent status information immediately upon
+--  accessing the agent.
+--
+--  Implementation of the cpqHeTrap group is optional for agents that
+--  support the Server Health MIB.
+--
+-- ****************************************************************************
+
+    cpqHeTrapPkts OBJECT-TYPE
+        SYNTAX  Counter
+        ACCESS  read-only
+        STATUS  deprecated
+        DESCRIPTION
+            "The total number of SNMP trap packets issued by the
+            Server Health agent."
+        ::= { cpqHeTrap 1 }
+
+    cpqHeTrapLogMaxSize OBJECT-TYPE
+        SYNTAX  INTEGER (0..2147483647)
+        ACCESS  read-only
+        STATUS  deprecated
+        DESCRIPTION
+            "The maximum number of entries that will currently be kept in
+            the trap log.  If the maximum size has been reached and a new
+            trap occurs the oldest trap will be removed."
+        ::= { cpqHeTrap 2 }
+
+-- ****************************************************************************
+--   Health MIB Trap Log Table
+--   =========================
+--
+-- The compaq enterprise               (1.3.6.1.4.1.232)
+--      cpqHealth Group                (1.3.6.1.4.1.232.6)
+--       cpqHeTrap Group               (1.3.6.1.4.1.232.6.3)
+--        cpqHeTrapLogTable            (1.3.6.1.4.1.232.6.3.3)  (deprecated)
+--
+-- ****************************************************************************
+
+    cpqHeTrapLogTable OBJECT-TYPE
+        SYNTAX  SEQUENCE OF CpqHeTrapLogEntry
+        ACCESS  not-accessible
+        STATUS  deprecated
+        DESCRIPTION
+            "An ordered list of trap log entries (conceptually a queue).  The
+            trap log entries will be kept in the order in which they were
+            generated with the most recent trap at index 1 and the oldest
+            trap entry at index trapLogMaxSize.  If the maximum number of
+            entries has been reached and a new trap occurs the oldest trap
+            will be removed when the new trap is added so the trapMaxLogSize
+            is not exceeded."
+        ::= { cpqHeTrap 3 }
+
+    cpqHeTrapLogEntry OBJECT-TYPE
+        SYNTAX  CpqHeTrapLogEntry
+        ACCESS  not-accessible
+        STATUS  deprecated
+        DESCRIPTION
+            "A description of a trap event."
+        INDEX   { cpqHeTrapLogIndex }
+        ::= { cpqHeTrapLogTable 1 }
+
+    CpqHeTrapLogEntry ::= SEQUENCE {
+        cpqHeTrapLogIndex        INTEGER,
+        cpqHeTrapType            INTEGER,
+        cpqHeTrapTime            OCTET STRING
+    }
+
+    cpqHeTrapLogIndex OBJECT-TYPE
+        SYNTAX  INTEGER (0..2147483647)
+        ACCESS  read-only
+        STATUS  deprecated
+        DESCRIPTION
+            "The value of this object uniquely identifies this trapLogEntry
+             at this time.  The most recent trap will have an index of 1 and
+             the oldest trap will have an index of trapLogMaxSize.  Because of
+             the queue-like nature of the trapLog this particular trap event's
+             index will change as new traps are issued."
+        ::= { cpqHeTrapLogEntry 1 }
+
+    cpqHeTrapType OBJECT-TYPE
+        SYNTAX  INTEGER {
+            cpqHeCorrectableMemoryError(1),
+            cpqHeCorrectableMemoryLogDisabled(2),
+            cpqHe2CorrectableMemoryError(6001),
+            cpqHe2CorrectableMemoryLogDisabled(6002),
+            cpqHeThermalTempFailed(6003),
+            cpqHeThermalTempDegraded(6004),
+            cpqHeThermalTempOk(6005),
+            cpqHeThermalSystemFanFailed(6006),
+            cpqHeThermalSystemFanDegraded(6007),
+            cpqHeThermalSystemFanOk(6008),
+            cpqHeThermalCpuFanFailed(6009),
+            cpqHeThermalCpuFanOk(6010),
+            cpqHeAsrConfirmation(6011),
+            cpqHeThermalConfirmation(6012),
+            cpqHePostError(6013)
+            }
+        ACCESS  read-only
+        STATUS  deprecated
+        DESCRIPTION
+            "The type of the trap event this entry describes.  This
+             number refers to an entry in a list of traps enumerating the
+             possible traps the Server Health agent may issue."
+        ::= { cpqHeTrapLogEntry 2 }
+
+    cpqHeTrapTime OBJECT-TYPE
+        SYNTAX  OCTET STRING (SIZE (0..6))
+        ACCESS  read-only
+        STATUS  deprecated
+        DESCRIPTION
+            "The time of the trap event that this entry describes.  The time
+             is given in year (first octet), month, day of month, hour,
+             minute, second (last octet) order.  The octets are in Binary
+             Coded Decimal (BCD)."
+        ::= { cpqHeTrapLogEntry 3 }
+
+-- ****************************************************************************
+--  Health MIB Trap Definitions
+--  ===========================
+--
+--  The SNMP trap messages must not be bigger than 484 octets (bytes).
+--
+--  Trap support in an SNMP agent implementation is optional.  An SNMP
+--  agent implementation may support all, some, or none of the traps.
+--  If traps are supported, The user should be provided with the option of
+--  disabling traps.
+-- **************************************************************************
+
+    cpqHeCorrectableMemoryError TRAP-TYPE
+        ENTERPRISE cpqHealth
+        VARIABLES  { cpqHeCorrMemTotalErrs }
+        DESCRIPTION
+            "A correctable memory error occurred.
+
+             The error has been corrected.  The current number of correctable
+             memory errors is reported in the variable cpqHeCorrMemTotalErrs."
+
+        --#TYPE "Correctable Memory Error Occurred (1)"
+        --#SUMMARY "Total correctable errors = %d."
+        --#ARGUMENTS {0}
+        --#SEVERITY MINOR
+        --#TIMEINDEX 99
+        --#STATE   OPERATIONAL
+
+        ::= 1
+
+    cpqHeCorrectableMemoryLogDisabled TRAP-TYPE
+        ENTERPRISE cpqHealth
+        VARIABLES  { cpqHeCorrMemLogStatus }
+        DESCRIPTION
+            "Correctable memory error tracking disabled.
+
+             The frequency of errors is so high that the error tracking
+             logic has been temporarily disabled.  The cpqHeCorrMemLogStatus
+             variable indicated the current tracking status."
+
+        --#TYPE "Memory Error Tracking Disabled (2)"
+        --#SUMMARY "Too many memory errors - tracking now disabled."
+        --#ARGUMENTS {}
+        --#SEVERITY CRITICAL
+        --#TIMEINDEX 99
+        --#STATE   DEGRADED
+
+        ::= 2
+
+-- Trap definitions for Insight Manager version 2.00 and greater
+-- use the Compaq Enterprise (232) and have unique trap numbers between all
+-- of the MIBs.
+
+    cpqHe2CorrectableMemoryError TRAP-TYPE
+        ENTERPRISE compaq
+        VARIABLES  { cpqHeCorrMemTotalErrs }
+        DESCRIPTION
+            "A correctable memory error occurred.
+
+             The error has been corrected.  The current number of correctable
+             memory errors is reported in the variable cpqHeCorrMemTotalErrs."
+
+        --#TYPE "Correctable Memory Error Occurred (6001)"
+        --#SUMMARY "Total correctable errors = %d."
+        --#ARGUMENTS {0}
+        --#SEVERITY MINOR
+        --#TIMEINDEX 99
+        --#STATE   DEGRADED
+
+        ::= 6001
+
+    cpqHe2CorrectableMemoryLogDisabled TRAP-TYPE
+        ENTERPRISE compaq
+        VARIABLES  { cpqHeCorrMemLogStatus }
+        DESCRIPTION
+            "Correctable memory error tracking disabled.
+
+             The frequency of errors is so high that the error tracking
+             logic has been temporarily disabled.  The cpqHeCorrMemLogStatus
+             variable indicated the current tracking status."
+
+        --#TYPE "Memory Error Tracking Disabled (6002)"
+        --#SUMMARY "Too many memory errors - tracking now disabled."
+        --#ARGUMENTS {}
+        --#SEVERITY CRITICAL
+        --#TIMEINDEX 99
+        --#STATE   DEGRADED
+
+        ::= 6002
+
+    cpqHeThermalTempFailed TRAP-TYPE
+        ENTERPRISE compaq
+        DESCRIPTION
+            "The temperature status has been set to failed.
+
+             The system will be shutdown due to this thermal condition."
+
+        --#TYPE "Thermal Failure (6003)"
+        --#SUMMARY "System will be shutdown due to this thermal condition."
+        --#ARGUMENTS {}
+        --#SEVERITY CRITICAL
+        --#TIMEINDEX 99
+        --#STATE  DEGRADED
+
+        ::= 6003
+
+    cpqHeThermalTempDegraded TRAP-TYPE
+        ENTERPRISE compaq
+        VARIABLES  { cpqHeThermalDegradedAction }
+        DESCRIPTION
+            "The temperature status has been set to degraded.
+
+             The server's temperature is outside of the normal operating
+             range.  The server will be shutdown if the
+             cpqHeThermalDegradedAction variable is set to shutdown(3)."
+
+        --#TYPE "Thermal Status Degraded (6004)"
+        --#SUMMARY "Temperature out of range.  Shutdown may occur."
+        --#ARGUMENTS {}
+        --#SEVERITY CRITICAL
+        --#TIMEINDEX 99
+        --#STATE   DEGRADED
+
+        ::= 6004
+
+    cpqHeThermalTempOk TRAP-TYPE
+        ENTERPRISE compaq
+        DESCRIPTION
+            "The temperature status has been set to ok.
+
+             The server's temperature has returned to the normal operating
+             range."
+
+        --#TYPE "Temperature OK (6005)"
+        --#SUMMARY "Temperature has returned to normal range."
+        --#ARGUMENTS {}
+        --#SEVERITY INFORMATIONAL
+        --#TIMEINDEX 99
+        --#STATE OPERATIONAL
+
+        ::= 6005
+
+    cpqHeThermalSystemFanFailed TRAP-TYPE
+        ENTERPRISE compaq
+        VARIABLES  { cpqHeThermalDegradedAction }
+        DESCRIPTION
+            "The system fan status has been set to failed.
+
+             A required system fan is not operating normally.  The system
+             will be shutdown if the cpqHeThermalDegradedAction variable
+             is set to shutdown(3)."
+
+        --#TYPE "System Fan Failure (6006)"
+        --#SUMMARY "Required fan not operating normally.  Shutdown may occur."
+        --#ARGUMENTS {}
+        --#SEVERITY CRITICAL
+        --#TIMEINDEX 99
+        --#STATE   DEGRADED
+
+        ::= 6006
+
+    cpqHeThermalSystemFanDegraded TRAP-TYPE
+        ENTERPRISE compaq
+        DESCRIPTION
+            "The system fan status has been set to degraded.
+
+             An optional system fan is not operating normally."
+
+        --#TYPE "System Fan Degraded (6007)"
+        --#SUMMARY "An optional fan is not operating normally."
+        --#ARGUMENTS {}
+        --#SEVERITY CRITICAL
+        --#TIMEINDEX 99
+        --#STATE   DEGRADED
+
+        ::= 6007
+
+    cpqHeThermalSystemFanOk TRAP-TYPE
+        ENTERPRISE compaq
+        DESCRIPTION
+            "The system fan status has been set to ok.
+
+             Any previously non-operational system fans have returned to
+             normal operation."
+
+        --#TYPE "System Fan OK (6008)"
+        --#SUMMARY "System fan has returned to normal operation."
+        --#ARGUMENTS {}
+        --#SEVERITY INFORMATIONAL
+        --#TIMEINDEX 99
+        --#STATE OPERATIONAL
+
+        ::= 6008
+
+    cpqHeThermalCpuFanFailed TRAP-TYPE
+        ENTERPRISE compaq
+        DESCRIPTION 
+            "The CPU fan status has been set to failed.
+
+             A processor fan is not operating normally.  The server will be
+             shutdown."
+
+        --#TYPE "CPU Fan Failure (6009)"
+        --#SUMMARY "CPU fan has failed.  Server will be shutdown."
+        --#ARGUMENTS {}
+        --#SEVERITY CRITICAL
+        --#TIMEINDEX 99
+        --#STATE   NONOPERATIONAL
+
+        ::= 6009
+
+    cpqHeThermalCpuFanOk TRAP-TYPE
+        ENTERPRISE compaq
+        DESCRIPTION
+            "The CPU fan status has been set to ok.
+
+             Any previously non-operational processor fans have returned
+             to normal operation."
+
+        --#TYPE "CPU Fan OK (6010)"
+        --#SUMMARY "CPU fan is now OK."
+        --#ARGUMENTS {}
+        --#SEVERITY INFORMATIONAL
+        --#TIMEINDEX 99
+        --#STATE OPERATIONAL
+
+        ::= 6010
+
+    cpqHeAsrConfirmation TRAP-TYPE
+        ENTERPRISE compaq
+        DESCRIPTION
+            "The server is operational again.
+
+             The server has previously been shutdown by the
+             Automatic Server Recovery (ASR) feature and has just
+             become operational again."
+
+        --#TYPE "Server Operational (6011)"
+        --#SUMMARY "Server is operational again after ASR shutdown."
+        --#ARGUMENTS {}
+        --#SEVERITY MINOR
+        --#TIMEINDEX 99
+        --#STATE OPERATIONAL
+
+        ::= 6011
+
+    cpqHeThermalConfirmation TRAP-TYPE
+        ENTERPRISE compaq
+        DESCRIPTION
+            "The server is operational again.
+
+             The server has previously been shutdown due to a thermal
+             anomaly on the server and has just become operational again."
+
+        --#TYPE "Server Operational (6012)"
+        --#SUMMARY "Server is operational again after thermal shutdown."
+        --#ARGUMENTS {}
+        --#SEVERITY MINOR
+        --#TIMEINDEX 99
+        --#STATE OPERATIONAL
+
+        ::= 6012
+
+    cpqHePostError TRAP-TYPE
+        ENTERPRISE compaq
+        DESCRIPTION
+            "One or more POST errors occurred.
+
+             Power On Self-Test (POST) errors occur during the server
+             restart process.  "
+
+        --#TYPE "POST Errors Occurred (6013)"
+        --#SUMMARY "Errors occurred during server restart."
+        --#ARGUMENTS {}
+        --#SEVERITY MINOR
+        --#TIMEINDEX 99
+        --#STATE OPERATIONAL
+
+        ::= 6013
+
+    cpqHeFltTolPwrSupplyDegraded TRAP-TYPE
+        ENTERPRISE compaq
+        DESCRIPTION
+            "The fault tolerant power supply sub-system condition has been
+             set to degraded."
+
+        --#TYPE "Server Power Supply Degraded (6014)"
+        --#SUMMARY "The server power supply status has become degraded."
+        --#ARGUMENTS {}
+        --#SEVERITY CRITICAL 
+        --#TIMEINDEX 99
+        --#STATE   DEGRADED
+
+        ::= 6014
+
+
+    cpqHe3CorrectableMemoryError TRAP-TYPE
+        ENTERPRISE compaq
+        VARIABLES  { sysName, cpqHoTrapFlags, cpqHeCorrMemTotalErrs }
+        DESCRIPTION
+            "A correctable memory error occurred.
+
+             The error has been corrected.  The current number of correctable
+             memory errors is reported in the variable cpqHeCorrMemTotalErrs."
+
+        --#TYPE "Correctable Memory Error Occurred (6015)"
+        --#SUMMARY "Total correctable errors = %d."
+        --#ARGUMENTS {2}
+        --#SEVERITY MINOR
+        --#TIMEINDEX 99
+        --#STATE   DEGRADED
+
+
+        ::= 6015
+
+    cpqHe3CorrectableMemoryLogDisabled TRAP-TYPE
+        ENTERPRISE compaq
+        VARIABLES  { sysName, cpqHoTrapFlags, cpqHeCorrMemLogStatus }
+        DESCRIPTION
+            "Correctable memory error tracking disabled.
+
+             The frequency of errors is so high that the error tracking
+             logic has been temporarily disabled.  The cpqHeCorrMemLogStatus
+             variable indicated the current tracking status."
+
+        --#TYPE "Memory Error Tracking Disabled (6016)"
+        --#SUMMARY "Too many memory errors - tracking now disabled."
+        --#ARGUMENTS {}
+        --#SEVERITY CRITICAL
+        --#TIMEINDEX 99
+        --#STATE   DEGRADED
+
+        ::= 6016
+
+    cpqHe3ThermalTempFailed TRAP-TYPE
+        ENTERPRISE compaq
+        VARIABLES  { sysName, cpqHoTrapFlags }
+        DESCRIPTION
+            "The temperature status has been set to failed.
+
+             The system will be shutdown due to this thermal condition."
+
+        --#TYPE "Thermal Failure (6017)"
+        --#SUMMARY "System will be shutdown due to this thermal condition."
+        --#ARGUMENTS {}
+        --#SEVERITY CRITICAL
+        --#TIMEINDEX 99
+        --#STATE  DEGRADED
+
+        ::= 6017
+
+    cpqHe3ThermalTempDegraded TRAP-TYPE
+        ENTERPRISE compaq
+        VARIABLES  { sysName, cpqHoTrapFlags, cpqHeThermalDegradedAction }
+        DESCRIPTION
+            "The temperature status has been set to degraded.
+
+             The server's temperature is outside of the normal operating
+             range.  The server will be shutdown if the
+             cpqHeThermalDegradedAction variable is set to shutdown(3)."
+
+        --#TYPE "Thermal Status Degraded (6018)"
+        --#SUMMARY "Temperature out of range.  Shutdown may occur."
+        --#ARGUMENTS {}
+        --#SEVERITY CRITICAL
+        --#TIMEINDEX 99
+        --#STATE   DEGRADED
+
+        ::= 6018
+
+    cpqHe3ThermalTempOk TRAP-TYPE
+        ENTERPRISE compaq
+        VARIABLES  { sysName, cpqHoTrapFlags }
+        DESCRIPTION
+            "The temperature status has been set to ok.
+
+             The server's temperature has returned to the normal operating
+             range."
+
+        --#TYPE "Temperature OK (6019)"
+        --#SUMMARY "Temperature has returned to normal range."
+        --#ARGUMENTS {}
+        --#SEVERITY INFORMATIONAL
+        --#TIMEINDEX 99
+        --#STATE OPERATIONAL
+
+        ::= 6019
+
+    cpqHe3ThermalSystemFanFailed TRAP-TYPE
+        ENTERPRISE compaq
+        VARIABLES  { sysName, cpqHoTrapFlags, cpqHeThermalDegradedAction }
+        DESCRIPTION
+            "The system fan status has been set to failed.
+
+             A required system fan is not operating normally.  The system
+             will be shutdown if the cpqHeThermalDegradedAction variable
+             is set to shutdown(3)."
+
+        --#TYPE "System Fan Failure (6020)"
+        --#SUMMARY "Required fan not operating normally.  Shutdown may occur."
+        --#ARGUMENTS {}
+        --#SEVERITY CRITICAL
+        --#TIMEINDEX 99
+        --#STATE   DEGRADED
+
+        ::= 6020
+
+    cpqHe3ThermalSystemFanDegraded TRAP-TYPE
+        ENTERPRISE compaq
+        VARIABLES  { sysName, cpqHoTrapFlags }
+        DESCRIPTION
+            "The system fan status has been set to degraded.
+
+             An optional system fan is not operating normally."
+
+        --#TYPE "System Fan Degraded (6021)"
+        --#SUMMARY "An optional fan is not operating normally."
+        --#ARGUMENTS {}
+        --#SEVERITY CRITICAL
+        --#TIMEINDEX 99
+        --#STATE   DEGRADED
+
+        ::= 6021
+
+    cpqHe3ThermalSystemFanOk TRAP-TYPE
+        ENTERPRISE compaq
+        VARIABLES  { sysName, cpqHoTrapFlags }
+        DESCRIPTION
+            "The system fan status has been set to ok.
+
+             Any previously non-operational system fans have returned to
+             normal operation."
+
+        --#TYPE "System Fan OK (6022)"
+        --#SUMMARY "System fan has returned to normal operation."
+        --#ARGUMENTS {}
+        --#SEVERITY INFORMATIONAL
+        --#TIMEINDEX 99
+        --#STATE OPERATIONAL
+
+        ::= 6022
+
+    cpqHe3ThermalCpuFanFailed TRAP-TYPE
+        ENTERPRISE compaq
+        VARIABLES  { sysName, cpqHoTrapFlags }
+        DESCRIPTION
+            "The CPU fan status has been set to failed.
+
+             A processor fan is not operating normally.  The server will be
+             shutdown."
+
+        --#TYPE "CPU Fan Failure (6023)"
+        --#SUMMARY "CPU fan has failed.  Server will be shutdown."
+        --#ARGUMENTS {}
+        --#SEVERITY CRITICAL
+        --#TIMEINDEX 99
+        --#STATE   NONOPERATIONAL
+
+        ::= 6023
+
+    cpqHe3ThermalCpuFanOk TRAP-TYPE
+        ENTERPRISE compaq
+        VARIABLES  { sysName, cpqHoTrapFlags }
+        DESCRIPTION
+            "The CPU fan status has been set to ok.
+
+             Any previously non-operational processor fans have returned
+             to normal operation."
+
+        --#TYPE "CPU Fan OK (6024)"
+        --#SUMMARY "CPU fan is now OK."
+        --#ARGUMENTS {}
+        --#SEVERITY INFORMATIONAL
+        --#TIMEINDEX 99
+        --#STATE OPERATIONAL
+
+        ::= 6024
+
+    cpqHe3AsrConfirmation TRAP-TYPE
+        ENTERPRISE compaq
+        VARIABLES  { sysName, cpqHoTrapFlags }
+        DESCRIPTION
+            "The server is operational again.
+
+             The server has previously been shutdown by the
+             Automatic Server Recovery (ASR) feature and has just
+             become operational again."
+
+        --#TYPE "Server Operational (6025)"
+        --#SUMMARY "Server is operational again after ASR shutdown."
+        --#ARGUMENTS {}
+        --#SEVERITY MINOR
+        --#TIMEINDEX 99
+        --#STATE OPERATIONAL
+
+        ::= 6025
+
+    cpqHe3ThermalConfirmation TRAP-TYPE
+        ENTERPRISE compaq
+        VARIABLES  { sysName, cpqHoTrapFlags }
+        DESCRIPTION
+            "The server is operational again.
+
+             The server has previously been shutdown due to a thermal
+             anomaly on the server and has just become operational again."
+
+        --#TYPE "Server Operational (6026)"
+        --#SUMMARY "Server is operational again after thermal shutdown."
+        --#ARGUMENTS {}
+        --#SEVERITY MINOR
+        --#TIMEINDEX 99
+        --#STATE OPERATIONAL
+
+        ::= 6026
+
+    cpqHe3PostError TRAP-TYPE
+        ENTERPRISE compaq
+        VARIABLES  { sysName, cpqHoTrapFlags }
+        DESCRIPTION
+            "One or more POST errors occurred.
+
+             Power On Self-Test (POST) errors occur during the server
+             restart process. Details of the POST error messages can 
+             be found in Integrated Management Log "
+
+        --#TYPE "POST Errors Occurred (6027)"
+        --#SUMMARY "Errors occurred during server restart."
+        --#ARGUMENTS {}
+        --#SEVERITY MINOR
+        --#TIMEINDEX 99
+        --#STATE OPERATIONAL
+
+        ::= 6027
+
+    cpqHe3FltTolPwrSupplyDegraded TRAP-TYPE
+        ENTERPRISE compaq
+        VARIABLES  { sysName, cpqHoTrapFlags }
+        DESCRIPTION
+            "The fault tolerant power supply sub-system condition has been
+             set to degraded."
+
+        --#TYPE "Server Power Supply Degraded (6028)"
+        --#SUMMARY "The server power supply status has become degraded."
+        --#ARGUMENTS {}
+        --#SEVERITY CRITICAL
+        --#TIMEINDEX 99
+        --#STATE   DEGRADED
+
+        ::= 6028
+
+-- Deprecated in 6.20 trap 6056 is the replacement
+    cpqHe3CorrMemReplaceMemModule TRAP-TYPE
+        ENTERPRISE compaq
+        VARIABLES  { sysName, cpqHoTrapFlags }
+        DESCRIPTION
+            "A correctable memory log entry indicates a memory module needs
+             to be replaced.
+
+             The errors have been corrected, but the memory module should be
+             replaced.  The error information is reported in the variable
+             cpqHeCorrMemErrDesc."
+
+        --#TYPE "Corr Mem Errors Require a Replacement Memory Module. (6029)"
+        --#SUMMARY "Correctable memory errs require a replacement memory module."
+        --#ARGUMENTS {}
+        --#SEVERITY MINOR
+        --#TIMEINDEX 99
+        --#STATE   DEGRADED
+
+
+        ::= 6029
+
+
+-- Deprecated in 5.10
+    cpqHe3FltTolPowerSupplyDegraded TRAP-TYPE
+        ENTERPRISE compaq
+        VARIABLES  { sysName, cpqHoTrapFlags, cpqHeFltTolPowerSupplyChassis,
+                     cpqHeFltTolPowerSupplyBay }
+        DESCRIPTION
+            "The fault tolerant power supply condition has been set
+            to degraded for the specified chassis and bay location."
+
+        --#TYPE "Power Supply Degraded (6030)"
+        --#SUMMARY "The Power Supply Degraded on Chassis %d, Bay %d."
+        --#ARGUMENTS {2, 3}
+        --#SEVERITY CRITICAL
+        --#TIMEINDEX 99
+        --#STATE   DEGRADED
+
+        ::= 6030
+
+-- Deprecated in 5.10
+    cpqHe3FltTolPowerSupplyFailed TRAP-TYPE
+        ENTERPRISE compaq
+        VARIABLES  { sysName, cpqHoTrapFlags, cpqHeFltTolPowerSupplyChassis,
+                     cpqHeFltTolPowerSupplyBay }
+        DESCRIPTION
+            "The fault tolerant power supply condition has been set
+            to failed for the specified chassis and bay location."
+
+        --#TYPE "Power Supply Failed (6031)"
+        --#SUMMARY "The Power Supply Failed on Chassis %d, Bay %d."
+        --#ARGUMENTS {2, 3}
+        --#SEVERITY CRITICAL
+        --#TIMEINDEX 99
+        --#STATE   NONOPERATIONAL
+
+        ::= 6031
+
+    cpqHe3FltTolPowerRedundancyLost TRAP-TYPE
+        ENTERPRISE compaq
+        VARIABLES  { sysName, cpqHoTrapFlags, cpqHeFltTolPowerSupplyChassis }
+        DESCRIPTION
+            "The Fault Tolerant Power Supplies have lost redundancy for
+            the specified chassis."
+
+        --#TYPE "Power Redundancy Lost (6032)"
+        --#SUMMARY "The Power Supplies are no longer redundant on Chassis %d."
+        --#ARGUMENTS {2}
+        --#SEVERITY MAJOR
+        --#TIMEINDEX 99
+        --#STATE   DEGRADED
+
+        ::= 6032
+
+    cpqHe3FltTolPowerSupplyInserted TRAP-TYPE
+        ENTERPRISE compaq
+        VARIABLES  { sysName, cpqHoTrapFlags, cpqHeFltTolPowerSupplyChassis,
+                     cpqHeFltTolPowerSupplyBay }
+        DESCRIPTION
+            "A Fault Tolerant Power Supply has been inserted into the
+            specified chassis and bay location."
+
+        --#TYPE "Power Supply Inserted (6033)"
+        --#SUMMARY "The Power Supply Inserted on Chassis %d, Bay %d."
+        --#ARGUMENTS {2, 3}
+        --#SEVERITY INFORMATIONAL
+        --#TIMEINDEX 99
+        --#STATE   OPERATIONAL
+
+        ::= 6033
+
+    cpqHe3FltTolPowerSupplyRemoved TRAP-TYPE
+        ENTERPRISE compaq
+        VARIABLES  { sysName, cpqHoTrapFlags, cpqHeFltTolPowerSupplyChassis,
+                     cpqHeFltTolPowerSupplyBay }
+        DESCRIPTION
+            "A Fault Tolerant Power Supply has been removed from the
+            specified chassis and bay location."
+
+        --#TYPE "Power Supply Removed (6034)"
+        --#SUMMARY "The Power Supply Removed on Chassis %d, Bay %d."
+        --#ARGUMENTS {2, 3}
+        --#SEVERITY MAJOR
+        --#TIMEINDEX 99
+        --#STATE   DEGRADED
+
+        ::= 6034
+
+    cpqHe3FltTolFanDegraded TRAP-TYPE
+        ENTERPRISE compaq
+        VARIABLES  { sysName, cpqHoTrapFlags, cpqHeFltTolFanChassis,
+                     cpqHeFltTolFanIndex }
+        DESCRIPTION
+            "The Fault Tolerant Fan condition has been set to degraded
+            for the specified chassis and fan."
+
+        --#TYPE "Fan Degraded (6035)"
+        --#SUMMARY "The Fan Degraded on Chassis %d, Fan %d."
+        --#ARGUMENTS {2, 3}
+        --#SEVERITY CRITICAL
+        --#TIMEINDEX 99
+        --#STATE   DEGRADED
+
+        ::= 6035
+
+    cpqHe3FltTolFanFailed TRAP-TYPE
+        ENTERPRISE compaq
+        VARIABLES  { sysName, cpqHoTrapFlags, cpqHeFltTolFanChassis,
+                     cpqHeFltTolFanIndex }
+        DESCRIPTION
+            "The Fault Tolerant Fan condition has been set to failed
+            for the specified chassis and fan."
+
+        --#TYPE "Fan Failed (6036)"
+        --#SUMMARY "The Fan Failed on Chassis %d, Fan %d."
+        --#ARGUMENTS {2, 3}
+        --#SEVERITY CRITICAL
+        --#TIMEINDEX 99
+        --#STATE   NONOPERATIONAL
+
+        ::= 6036
+
+    cpqHe3FltTolFanRedundancyLost TRAP-TYPE
+        ENTERPRISE compaq
+        VARIABLES  { sysName, cpqHoTrapFlags, cpqHeFltTolFanChassis }
+        DESCRIPTION
+            "The Fault Tolerant Fans have lost redundancy for the
+            specified chassis."
+
+        --#TYPE "Fan Redundancy Lost (6037)"
+        --#SUMMARY "The Fans are no longer redundant on Chassis %d." 
+        --#ARGUMENTS {2}
+        --#SEVERITY MAJOR
+        --#TIMEINDEX 99
+        --#STATE   DEGRADED
+
+        ::= 6037
+
+    cpqHe3FltTolFanInserted TRAP-TYPE
+        ENTERPRISE compaq
+        VARIABLES  { sysName, cpqHoTrapFlags, cpqHeFltTolFanChassis,
+                     cpqHeFltTolFanIndex }
+        DESCRIPTION
+            "A Fault Tolerant Fan has been inserted into the specified
+            chassis and fan location."
+
+        --#TYPE "Fan Inserted (6038)"
+        --#SUMMARY "The Fan Inserted on Chassis %d, Fan %d."
+        --#ARGUMENTS {2, 3}
+        --#SEVERITY INFORMATIONAL
+        --#TIMEINDEX 99
+        --#STATE   OPERATIONAL
+
+        ::= 6038
+
+    cpqHe3FltTolFanRemoved TRAP-TYPE
+        ENTERPRISE compaq
+        VARIABLES  { sysName, cpqHoTrapFlags, cpqHeFltTolFanChassis,
+                     cpqHeFltTolFanIndex }
+        DESCRIPTION
+            "A Fault Tolerant Fan has been removed from the specified
+            chassis and fan location."
+
+        --#TYPE "Fan Removed (6039)"
+        --#SUMMARY "The Fan Removed on Chassis %d, Fan %d."
+        --#ARGUMENTS {2, 3}
+        --#SEVERITY MAJOR
+        --#TIMEINDEX 99
+        --#STATE   DEGRADED
+
+        ::= 6039
+
+    cpqHe3TemperatureFailed TRAP-TYPE
+        ENTERPRISE compaq
+        VARIABLES  { sysName, cpqHoTrapFlags, cpqHeTemperatureChassis,
+                     cpqHeTemperatureLocale }
+        DESCRIPTION
+            "The temperature status has been set to failed in the
+            specified chassis and location.
+
+            The system will be shutdown due to this condition."
+
+        --#TYPE "Thermal Failure (6040)"
+        --#SUMMARY "Temperature Exceeded on Chassis %d, Location %d."
+        --#ARGUMENTS {2, 3}
+        --#SEVERITY CRITICAL
+        --#TIMEINDEX 99
+        --#STATE  DEGRADED
+
+        ::= 6040
+
+    cpqHe3TemperatureDegraded TRAP-TYPE
+        ENTERPRISE compaq
+        VARIABLES  { sysName, cpqHoTrapFlags, cpqHeThermalDegradedAction,
+                     cpqHeTemperatureChassis, cpqHeTemperatureLocale }
+        DESCRIPTION
+            "The temperature status has been set to degraded in the
+            specified chassis and location.
+
+            The server's temperature is outside of the normal operating
+            range.  The server will be shutdown if the
+            cpqHeThermalDegradedAction variable is set to shutdown(3)."
+
+        --#TYPE "Thermal Status Degraded (6041)"
+        --#SUMMARY "Temperature out of range on Chassis %d, Location %d. Shutdown may occur."
+        --#ARGUMENTS {3, 4}
+        --#SEVERITY CRITICAL
+        --#TIMEINDEX 99
+        --#STATE   DEGRADED
+
+        ::= 6041
+
+    cpqHe3TemperatureOk TRAP-TYPE
+        ENTERPRISE compaq
+        VARIABLES  { sysName, cpqHoTrapFlags, cpqHeTemperatureChassis,
+                     cpqHeTemperatureLocale }
+        DESCRIPTION
+            "The temperature status has been set to ok in the
+            specified chassis and location.
+
+            The server's temperature has returned to the normal operating
+            range."
+
+        --#TYPE "Thermal Status OK (6042)"
+        --#SUMMARY "Temperature Normal on Chassis %d, Location %d."
+        --#ARGUMENTS {2, 3}
+        --#SEVERITY INFORMATIONAL
+        --#TIMEINDEX 99
+        --#STATE OPERATIONAL
+
+        ::= 6042
+
+    cpqHe3PowerConverterDegraded TRAP-TYPE
+        ENTERPRISE compaq
+        VARIABLES  { sysName, cpqHoTrapFlags, cpqHePwrConvChassis,
+                     cpqHePwrConvSlot, cpqHePwrConvSocket }
+        DESCRIPTION
+            "The DC-DC Power Converter condition has been set to degraded
+            for the specified chassis, slot and socket."
+
+        --#TYPE "Power Converter Degraded (6043)"
+        --#SUMMARY "The Power Converter Degraded on Chassis %d, Slot %d, Socket %d."
+        --#ARGUMENTS {2, 3, 4}
+        --#SEVERITY CRITICAL
+        --#TIMEINDEX 99
+        --#STATE   DEGRADED
+
+
+        ::= 6043
+
+    cpqHe3PowerConverterFailed TRAP-TYPE
+        ENTERPRISE compaq
+        VARIABLES  { sysName, cpqHoTrapFlags, cpqHePwrConvChassis,
+                     cpqHePwrConvSlot, cpqHePwrConvSocket }
+        DESCRIPTION
+            "The DC-DC Power Converter condition has been set to failed
+            for the specified chassis, slot and socket."
+
+        --#TYPE "Power Converter Failed (6044)"
+        --#SUMMARY "The Power Converter Failed on Chassis %d, Slot %d, Socket %d."
+        --#ARGUMENTS {2, 3, 4}
+        --#SEVERITY CRITICAL
+        --#TIMEINDEX 99
+        --#STATE   NONOPERATIONAL
+
+        ::= 6044
+
+    cpqHe3PowerConverterRedundancyLost TRAP-TYPE
+        ENTERPRISE compaq
+        VARIABLES  { sysName, cpqHoTrapFlags, cpqHePwrConvChassis }
+        DESCRIPTION
+            "The DC-DC Power Converters have lost redundancy for the
+            specified chassis."
+
+        --#TYPE "Power Converter Redundancy Lost (6045)"
+        --#SUMMARY "The Power Converters are no longer redundant on Chassis %d."
+        --#ARGUMENTS {2}
+        --#SEVERITY CRITICAL
+        --#TIMEINDEX 99
+        --#STATE   DEGRADED
+
+
+        ::= 6045
+
+    cpqHe3CacheAccelParityError TRAP-TYPE
+        ENTERPRISE compaq
+        VARIABLES  { sysName, cpqHoTrapFlags }
+        DESCRIPTION
+            "A cache accelerator parity error indicates a cache module
+             needs to be replaced.
+
+             The error information is reported in the variable
+             cpqHeEventLogErrorDesc."
+
+        --#TYPE "Cache Accel Parity Errors may require a module. (6046)"
+        --#SUMMARY "Cache Accelerator errors may require a replacement module."
+        --#ARGUMENTS {}
+        --#SEVERITY CRITICAL
+        --#TIMEINDEX 99
+        --#STATE   NONOPERATIONAL
+
+
+        ::= 6046
+
+    cpqHeResilientMemOnlineSpareEngaged TRAP-TYPE
+        ENTERPRISE compaq
+        VARIABLES  { sysName, cpqHoTrapFlags }
+        DESCRIPTION
+           "Advanced Memory Protection Online Spare Engaged.
+
+           The Advanced Memory Protection subsystem has detected a memory
+           fault. The Online Spare Memory has been activated.
+
+           User Action: Schedule server down-time to replace the faulty
+           memory."
+
+        --#TYPE "Online Spare Memory Engaged (6047)"
+        --#SUMMARY "The Advanced Memory Protection subsystem has engaged the online spare memory."
+        --#ARGUMENTS {}
+        --#SEVERITY MAJOR
+        --#TIMEINDEX 99
+        --#STATE DEGRADED
+
+        ::= 6047
+
+-- New for rev 5.10.
+    cpqHe4FltTolPowerSupplyOk TRAP-TYPE
+        ENTERPRISE compaq
+        VARIABLES  { sysName, cpqHoTrapFlags, cpqHeFltTolPowerSupplyChassis,
+                     cpqHeFltTolPowerSupplyBay, cpqHeFltTolPowerSupplyStatus,
+                     cpqHeFltTolPowerSupplyModel, cpqHeFltTolPowerSupplySerialNumber,
+                     cpqHeFltTolPowerSupplyAutoRev, cpqHeFltTolPowerSupplyFirmwareRev,
+                     cpqHeFltTolPowerSupplySparePartNum, cpqSiServerSystemId }
+        DESCRIPTION
+            "The fault tolerant power supply condition has been set back
+            to the OK state for the specified chassis and bay location."
+
+        --#TYPE "Power Supply OK (6048)"
+        --#SUMMARY "The Power Supply is OK on Chassis %d, Bay %d, Status %d, Model %s, Serial Num %s, Firmware %s."
+        --#ARGUMENTS {2, 3, 4, 5, 6, 8}
+        --#SEVERITY INFORMATIONAL
+        --#TIMEINDEX 99
+        --#STATE OPERATIONAL
+
+        ::= 6048
+
+-- New for rev 5.10.  Deprecated cpqHe3FltTolPowerSupplyDegraded
+    cpqHe4FltTolPowerSupplyDegraded TRAP-TYPE
+        ENTERPRISE compaq
+        VARIABLES  { sysName, cpqHoTrapFlags, cpqHeFltTolPowerSupplyChassis,
+                     cpqHeFltTolPowerSupplyBay, cpqHeFltTolPowerSupplyStatus,
+                     cpqHeFltTolPowerSupplyModel, cpqHeFltTolPowerSupplySerialNumber,
+                     cpqHeFltTolPowerSupplyAutoRev, cpqHeFltTolPowerSupplyFirmwareRev,
+                     cpqHeFltTolPowerSupplySparePartNum, cpqSiServerSystemId }
+        DESCRIPTION
+            "The fault tolerant power supply condition has been set
+            to degraded for the specified chassis and bay location."
+
+        --#TYPE "Power Supply Degraded (6049)"
+        --#SUMMARY "The Power Supply is Degraded on Chassis %d, Bay %d, Status %d, Model %s, Serial Num %s, Firmware %s."
+        --#ARGUMENTS {2, 3, 4, 5, 6, 8}
+        --#SEVERITY CRITICAL
+        --#TIMEINDEX 99
+        --#STATE DEGRADED
+
+        ::= 6049
+
+-- New for rev 5.10.  Deprecated cpqHe3FltTolPowerSupplyFailed
+    cpqHe4FltTolPowerSupplyFailed TRAP-TYPE
+        ENTERPRISE compaq
+        VARIABLES  { sysName, cpqHoTrapFlags, cpqHeFltTolPowerSupplyChassis,
+                     cpqHeFltTolPowerSupplyBay, cpqHeFltTolPowerSupplyStatus,
+                     cpqHeFltTolPowerSupplyModel, cpqHeFltTolPowerSupplySerialNumber,
+                     cpqHeFltTolPowerSupplyAutoRev, cpqHeFltTolPowerSupplyFirmwareRev,
+                     cpqHeFltTolPowerSupplySparePartNum, cpqSiServerSystemId }
+        DESCRIPTION
+            "The fault tolerant power supply condition has been set
+            to failed for the specified chassis and bay location."
+
+        --#TYPE "Power Supply Failed (6050)"
+        --#SUMMARY "The Power Supply is Failed on Chassis %d, Bay %d, Status %d, Model %s, Serial Num %s, Firmware %s."
+        --#ARGUMENTS {2, 3, 4, 5, 6, 8}
+        --#SEVERITY CRITICAL
+        --#TIMEINDEX 99
+        --#STATE NONOPERATIONAL
+
+        ::= 6050
+
+-- New for rev 5.40.
+    cpqHeResilientMemMirroredMemoryEngaged TRAP-TYPE
+        ENTERPRISE compaq
+        VARIABLES  { sysName, cpqHoTrapFlags }
+        DESCRIPTION
+           "Advanced Memory Protection Mirrored Memory Engaged.
+
+           The Advanced Memory Protection subsystem has detected a memory
+           fault. Mirrored Memory has been activated.
+
+           User Action: Replace the faulty memory."
+
+        --#TYPE "Mirrored Memory Engaged (6051)"
+        --#SUMMARY "The Advanced Memory Protection subsystem has engaged the online spare memory."
+        --#ARGUMENTS {}
+        --#SEVERITY MAJOR
+        --#TIMEINDEX 99
+        --#STATE DEGRADED
+
+        ::= 6051
+
+-- New for rev 5.50.
+    cpqHeResilientAdvancedECCMemoryEngaged TRAP-TYPE
+        ENTERPRISE compaq
+        VARIABLES  { sysName, cpqHoTrapFlags }
+        DESCRIPTION
+           "Advanced Memory Protection Advanced ECC Memory Engaged.
+
+           The Advanced Memory Protection subsystem has detected a memory
+           fault. Advanced ECC has been activated.
+
+           User Action: Replace the faulty memory."
+
+        --#TYPE "Advanced ECC Memory Engaged (6052)"
+        --#SUMMARY "The Advanced Memory Protection subsystem has engaged the advanced ECC memory."
+        --#ARGUMENTS {}
+        --#SEVERITY MAJOR
+        --#TIMEINDEX 99
+        --#STATE DEGRADED
+
+        ::= 6052
+
+-- New traps added for 6.20.
+
+    cpqHeResilientMemXorMemoryEngaged TRAP-TYPE
+        ENTERPRISE compaq
+        VARIABLES  { sysName, cpqHoTrapFlags }
+        DESCRIPTION
+           "Advanced Memory Protection XOR Engine Memory Engaged.
+
+           The Advanced Memory Protection subsystem has detected a memory
+           fault. The XOR engine has been activated.
+
+           User Action: Replace the faulty memory."
+
+        --#TYPE "Advanced XOR Memory Engaged (6053)"
+        --#SUMMARY "The Advanced Memory Protection subsystem has engaged the XOR memory."
+        --#ARGUMENTS {}
+        --#SEVERITY MAJOR
+        --#TIMEINDEX 99
+        --#STATE DEGRADED
+
+        ::= 6053
+
+    cpqHe3FltTolPowerRedundancyRestored TRAP-TYPE
+        ENTERPRISE compaq
+        VARIABLES  { sysName, cpqHoTrapFlags, cpqHeFltTolPowerSupplyChassis }
+        DESCRIPTION
+            "The Fault Tolerant Power Supplies have returned to a redundant
+            state for the specified chassis."
+
+        --#TYPE "Power Redundancy Restored (6054)"
+        --#SUMMARY "The Power Supplies are now redundant on Chassis %d."
+        --#ARGUMENTS {2}
+        --#SEVERITY INFORMATIONAL
+        --#TIMEINDEX 99
+        --#STATE OPERATIONAL
+ 
+        ::= 6054
+
+    cpqHe3FltTolFanRedundancyRestored TRAP-TYPE
+        ENTERPRISE compaq
+        VARIABLES  { sysName, cpqHoTrapFlags, cpqHeFltTolFanChassis }
+        DESCRIPTION
+            "The Fault Tolerant Fans have returned to a redundant state for
+            the specified chassis."
+
+        --#TYPE "Fan Redundancy Restored (6055)"
+        --#SUMMARY "The Fans are now redundant on Chassis %d."
+        --#ARGUMENTS {2}
+        --#SEVERITY INFORMATIONAL
+        --#TIMEINDEX 99
+        --#STATE OPERATIONAL
+
+        ::= 6055
+
+-- Updated for 6.20 trap replaced 6029
+-- deprecateed in 8.20 replaced with 6064
+    cpqHe4CorrMemReplaceMemModule TRAP-TYPE
+        ENTERPRISE compaq
+        VARIABLES  { sysName, cpqHoTrapFlags, cpqHeResMemBoardIndex,
+                     cpqHeResMemModuleIndex, cpqHeResMemModuleSparePartNo,
+                     cpqSiMemModuleSize, cpqSiServerSystemId }
+        DESCRIPTION
+            "Corrected Memory Errors Detected
+
+             The errors have been corrected, but the memory module should be
+             replaced."
+
+        --#TYPE "Corrected Memory Errors - Replace Memory Module. (6056)"
+        --#SUMMARY "Correctable memory errors require a replacement of the memory module in slot %d, socket %d."
+        --#ARGUMENTS {2, 3}
+        --#SEVERITY MINOR
+        --#TIMEINDEX 99
+        --#STATE   DEGRADED
+
+        ::= 6056
+
+-- deprecateed in 8.20 replaced with 6065
+    cpqHeResMemBoardRemoved TRAP-TYPE
+        ENTERPRISE compaq
+        VARIABLES  { sysName, cpqHoTrapFlags, cpqHeResMemBoardSlotIndex }
+        DESCRIPTION 
+           "Memory board or cartridge removed.
+
+           An Advanced Memory Protection sub-system board or cartridge has
+           been removed from the system.
+
+           User Action: Insure the board or cartridge has memory correctly
+           installed and re-insert the memory board or cartridge back into
+           the system."
+
+        --#TYPE "Memory Board or Cartridge Removed (6057)"
+        --#SUMMARY "Memory Board or Cartridge Removed from Slot %d."
+        --#ARGUMENTS {2}
+        --#SEVERITY MAJOR
+        --#TIMEINDEX 99
+        --#STATE OPERATIONAL
+        ::= 6057
+
+-- deprecateed in 8.20 replaced with 6066
+    cpqHeResMemBoardInserted TRAP-TYPE
+        ENTERPRISE compaq
+        VARIABLES  { sysName, cpqHoTrapFlags, cpqHeResMemBoardSlotIndex }
+        DESCRIPTION
+           "Memory board or cartridge inserted.
+
+           An Advanced Memory Protection sub-system board or cartridge has
+           been inserted into the system.
+
+           User Action: None."
+
+        --#TYPE "Memory Board or Cartridge Inserted (6058)"
+        --#SUMMARY "Memory Board or Cartridge Inserted into Slot %d."
+        --#ARGUMENTS {2}
+        --#SEVERITY INFORMATIONAL
+        --#TIMEINDEX 99
+        --#STATE OPERATIONAL
+        ::= 6058
+
+-- deprecateed in 8.20 replaced with 6067
+    cpqHeResMemBoardBusError TRAP-TYPE
+        ENTERPRISE compaq
+        VARIABLES  { sysName, cpqHoTrapFlags, cpqHeResMemBoardSlotIndex }
+        DESCRIPTION
+           "Memory board or cartridge bus error detected.
+
+           An Advanced Memory Protection sub-system board or cartridge
+           bus error has been detected.
+
+           User Action: Replace the indicated board or cartridge."
+
+        --#TYPE "Memory Board or Cartridge Bus Error Detected (6059)"
+        --#SUMMARY "Memory Board or Cartridge Bus Error Detected in Slot %d."
+        --#ARGUMENTS {2}
+        --#SEVERITY CRITICAL
+        --#TIMEINDEX 99
+        --#STATE DEGRADED
+        ::= 6059
+
+-- The follow trap 6060 is supported only in Tru64 at this time.
+-- This trap is not currently supported for ProLiants.
+    cpqHeEventOccurred TRAP-TYPE
+        ENTERPRISE compaq
+        VARIABLES  { sysName, cpqHoTrapFlags, cpqHeEventLogEntryNumber,
+                     cpqHeEventLogEntrySeverity, cpqHeEventLogUpdateTime,
+                     cpqHeEventLogErrorDesc }
+        DESCRIPTION
+           "An event has occurred.
+           User Action: None."
+
+        --#TYPE "Event has occurred (6060)"
+        --#SUMMARY "Event %s has occurred, Severity %d "
+        --#ARGUMENTS {5,3}
+        --#SEVERITY INFORMATIONAL
+        --#TIMEINDEX 99
+        --#STATE OPERATIONAL
+        ::= 6060
+
+cpqHeManagementProcInReset TRAP-TYPE
+        ENTERPRISE compaq
+        VARIABLES  { sysName, cpqHoTrapFlags }
+        DESCRIPTION
+            "The Management processor is currently in reset
+
+             The management processor is currently in the process of being reset
+             because of a firmware update or some other event.
+
+             User action: None"
+
+        --#TYPE "Management processor is currently in reset. (6061)"
+        --#SUMMARY "The Management processor is in the process of being reset."
+        --#ARGUMENTS {}
+        --#SEVERITY MINOR
+        --#TIMEINDEX 99
+        --#STATE   DEGRADED
+
+        ::= 6061
+
+    cpqHeManagementProcReady TRAP-TYPE
+        ENTERPRISE compaq
+        VARIABLES  { sysName, cpqHoTrapFlags }
+        DESCRIPTION
+            "The Management processor is ready
+
+             The management processor has successfully reset and is now available
+             again.
+
+             User action: None"
+
+        --#TYPE "Management processor is ready. (6062)"
+        --#SUMMARY "The Management processor is ready after a successfull reset."
+        --#ARGUMENTS {}
+        --#SEVERITY INFORMATIONAL
+        --#TIMEINDEX 99
+        --#STATE OPERATIONAL
+
+        ::= 6062
+
+    cpqHeManagementProcFailedReset TRAP-TYPE
+        ENTERPRISE compaq
+        VARIABLES  { sysName, cpqHoTrapFlags }
+        DESCRIPTION
+            "The Management processor failed reset
+
+             The management processor was not successfully reset and is not 
+             operational.
+
+             User action: Reset the management procesessor again or re-flash
+             the management processor firmware."
+
+        --#TYPE "Management processor failed reset. (6063)"
+        --#SUMMARY "The Management processor failed reset."
+        --#ARGUMENTS {}
+        --#SEVERITY CRITICAL
+        --#TIMEINDEX 99
+        --#STATE   NONOPERATIONAL
+
+        ::= 6063
+
+-- Updated for 8.20 trap replaced 6056
+    cpqHe5CorrMemReplaceMemModule TRAP-TYPE
+        ENTERPRISE compaq
+        VARIABLES  { sysName, cpqHoTrapFlags, cpqHeResMem2BoardNum, 
+                     cpqHeResMem2CpuNum, cpqHeResMem2RiserNum, 
+                     cpqHeResMem2ModuleNum, cpqHeResMem2ModulePartNo, 
+                     cpqHeResMem2ModuleSize, cpqSiServerSystemId }
+        DESCRIPTION
+            "Corrected Memory Errors Detected
+
+             The errors have been corrected, but the memory module should be
+             replaced. Value 0 for CPU means memory is not Processor based"
+
+        --#TYPE "Corrected Memory Errors - Replace Memory Module. (6064)"
+        --#SUMMARY "Correctable memory errors require a replacement of the memory module in slot %d, cpu %d, riser %d, socket %d."
+        --#ARGUMENTS {2, 3, 4}
+        --#SEVERITY MINOR
+        --#TIMEINDEX 99
+        --#STATE   DEGRADED
+
+        ::= 6064
+
+-- Updated for 8.20 trap replaced 6057
+    cpqHe5ResMemBoardRemoved TRAP-TYPE
+        ENTERPRISE compaq
+        VARIABLES  { sysName, cpqHoTrapFlags, cpqHeResMem2BoardSlotNum, cpqHeResMem2BoardCpuNum, cpqHeResMem2BoardRiserNum }
+        DESCRIPTION 
+           "Memory board or cartridge or riser removed.
+
+           An Advanced Memory Protection sub-system board or cartridge or riser has
+           been removed from the system. Value 0 for CPU means memory is not processor based.
+
+           User Action: Insure the board or cartridge or riser has memory correctly
+           installed and re-insert the memory board or cartridge or CPU back into
+           the system."
+
+        --#TYPE "Memory Board or Cartridge or Riser Removed (6065)"
+        --#SUMMARY "Memory Board or Cartridge or riser Removed from Slot %d, Cpu %d Riser %d."
+        --#ARGUMENTS {2,3,4}
+        --#SEVERITY MAJOR
+        --#TIMEINDEX 99
+        --#STATE OPERATIONAL
+        ::= 6065
+
+-- Updated for 8.20 trap replaced 6058
+    cpqHe5ResMemBoardInserted TRAP-TYPE
+        ENTERPRISE compaq
+        VARIABLES  { sysName, cpqHoTrapFlags, cpqHeResMem2BoardSlotNum, cpqHeResMem2BoardCpuNum, cpqHeResMem2BoardRiserNum }
+        DESCRIPTION
+           "Memory board or cartridge or riser inserted.
+
+           An Advanced Memory Protection sub-system board or cartridge or riser 
+           Has been inserted into the system. Value 0 for CPU means memory is not processor based.
+
+           User Action: None."
+
+        --#TYPE "Memory Board or Cartridge Inserted (6066)"
+        --#SUMMARY "Memory Board or Cartridge Inserted into Slot %d, Cpu %d, Riser %d."
+        --#ARGUMENTS {2,3,4}
+        --#SEVERITY INFORMATIONAL
+        --#TIMEINDEX 99
+        --#STATE OPERATIONAL
+        ::= 6066
+
+-- Updated for 8.20 trap replaced 6059
+    cpqHe5ResMemBoardBusError TRAP-TYPE
+        ENTERPRISE compaq
+        VARIABLES  { sysName, cpqHoTrapFlags, cpqHeResMem2BoardSlotNum, cpqHeResMem2BoardCpuNum, cpqHeResMem2BoardRiserNum }
+        DESCRIPTION
+           "Memory board or cartridge or Riser bus error detected.
+
+           An Advanced Memory Protection sub-system board or cartridge or Riser
+           bus error has been detected. Value 0 for CPU means memory is not processor based.
+
+           User Action: Replace the indicated board or cartridge or Riser."
+
+        --#TYPE "Memory Board or Cartridge or Riser Bus Error Detected (6067)"
+        --#SUMMARY "Memory Board or Cartridge Bus Error Detected in Slot %d, Cpu %d, Riser %d."
+        --#ARGUMENTS {2,3,4}
+        --#SEVERITY CRITICAL
+        --#TIMEINDEX 99
+        --#STATE DEGRADED
+        ::= 6067
+
+-- Added for 8.20
+    cpqHeResilientMemLockStepMemoryEngaged TRAP-TYPE
+        ENTERPRISE compaq
+        VARIABLES  { sysName, cpqHoTrapFlags }
+        DESCRIPTION
+           "Advanced Memory Protection LockStep Engine Memory Engaged.
+
+           The Advanced Memory Protection subsystem has detected a memory
+           fault. The LockStep engine has been activated.
+
+           User Action: Replace the faulty memory."
+
+        --#TYPE "Advanced LockStep Memory Engaged (6068)"
+        --#SUMMARY "The Advanced Memory Protection subsystem has engaged the LockStep memory."
+        --#ARGUMENTS {}
+        --#SEVERITY MAJOR
+        --#TIMEINDEX 99
+        --#STATE DEGRADED
+
+        ::= 6068
+
+END