* added new sensors to mes23xx
* ci
* copy/paste error
* ci
* cleanup + testdata
* yaml
* yamlnew
* added [no_bulk] for PoE discovery
* fully qualified OID name
* forcewalk param
* [snmp][no_bulk]
* var names, test, schema
* Key off OIDs, not mibs
luminato is POC and needs to be reverted before merge.
* fix up os schema
* docs
* remove luminato arbitrary changes
Co-authored-by: Tony Murray <[email protected]>
* Initial Support for Fujitsu RX300 with iRMC4
Initial Support for Fujitsu RX300 with iRMC4 (might work for other servers, too)
* Fixed Typo in power consumption
* Changed MIB-Name and added sysDescr for more granular detection
* Update fujitsuiRMC_rx300.snmprec
changed serial to a generic one
* Update fujitsuiRMC_rx300.json
Updated to use correct serial number
* Update fujitsuiRMC_rx300.snmprec
* Update fujitsuiRMC_rx300.json
* Tried to create a discovery yaml with valid num_oid and valid test data
* Update fujitsuiRMC.yaml
removed remaining index parameter (forgot them from previous testing)
* Update fujitsuiRMC_rx300.json
Updated test data to reflect recent changes
Co-authored-by: Neil Lathwood <[email protected]>
* Initial commit of DCP-M
* Match on system name DCP
* Fix matching regex
* Add pre-cache and dbm discovery
* Show dbm graph
* Adding snmpsim data
* Fix styleCI issue
* Detect dcp-m mib
* DCP-M Progress
* Fix CI issue
* Removing pre-cache and dbm files
* Do not include empty tables in test data
* empty data is simpler to check now
* Update test data
* revert comment options that block update all test data
* clean existing data
* fixes
* another fix
* remov extra sensors???
* why is that using that ip...
* missed an empty table
* missed one
* restore ftos
* revert another ftos
* revert ird
* restore timos
* restore timos_7705
* oops
* double oops
* timos mpls
* timos_hc
* another timos_hc fix
* Smartax supports IF-MIB, skip custom discovery and fix polling GPON ports in and out traffic
* This file seems to break GPON port polling on SmartAXes firmware versions R017 and R018, deleting the file fixes GPON polling
* Added necessary test files so that polling tests do not fail
* q-bridge-mib, discover missing VLANs v2
* copy/paste typo fix
* Use SnmpQuery
* Switch from Vlan_x to VLAN x
* Cleanup
Revert accidental change
Incorrect table depth (even though the outcome is the same)
And test data that was explicitly Vlan_
* fix test data
* update routeros_vlans
Co-authored-by: Tony Murray <[email protected]>
* Fix missing mib_dir in definition
* Added state sensors
* snmprec data
* json data
* delete unused snmprec
* License and Author
* remove unused json data
* Fix style issues
* Fix more style issues coz im blind
* Fix more style issues coz im blind last
* Refactored
* Why do we loop?
* Fix style issues
* Update polling
* Refactor to use methods
* Fix a pair of style issues
* Updated test files
* Convert to yaml
* Wrong description on Mode
* Added another state + fixed some indexes
* Dunno what happened
* Fix for phpstan level 6
* Fix forstyleci
Co-authored-by: Tony Murray <[email protected]>
* Initial discovery for APC EPDU1132M
* Rename current APC ePDU model to specific
* Add more conditions to test
* Ignore APC ePDU
* Add version field
* Update version in test file
* Add JSON test data
Also remove hostname (was literal question mark), was causing issues
* Fix warnings up to Arbos
* fixes a-c
* a-r
* a-vrp
* There and back again
* Update test data, couple fixes
* PHPSStan fixes
* style fixes, and fix Asyncos, whoops
* flip serial back.......
* less bogus data
* Poweralert sysName during polling too
* make sure things are calculated in the correct order
* fix style and bad nullables
* update test data
* A comple more conversions
* cambium ptp, misc, and hardware_mib
* remaining except vmware-esxi
* Fixes
* Update baseline
* fixes and fix up baseline
* adjust SnmpQueryMock to upstream options change
* data corrections
* restore slashes
* correctly handle all options input in SnmpQueryMock
* undo ftos changes
* restore vccodec sysDescr
* Init work on rutos-3xx
* Add RUT360 support in rutos-rutx
* Testdata
* Removed old files
* Removed unused pre-caching
* Undo changes to mib
* Modified rutx11 test data
* Changed state_name
* Revert "Changed state_name"
This reverts commit fb61f8df67.
* Changed state_name
* Changed state_name
* Changed state_name and hopefully fixes tests
* Changed rutx11 test data
* Changed state_name back
* Revert
* Fixed state_name to avoid collision
* Updated rut360 test data
* Modified rutx11 test data
* Fixed typo
* Updated test data for rutx11
* Raspberry Pi: Add SNMP extend to monitor IO pins or sensor modules connected to the GPIO header
* Raspberry Pi: Add new test data
* Raspberry Pi: Make styleci happy
* Raspberry Pi: Fix some more style issues
* Raspberry Pi: Use d_echo for array debug
* Raspberry Pi: Prevent processing if the extension is not present
* Raspberry Pi: Make styleci happy
* Raspberry Pi: Update test data
* Raspberry Pi: Remove debugging
* Add Processor discovery for Dell PowerConnect 28xx
* Add Temperature discovery and cleanup code
* Add test data for PowerConnect 2824
* Add Serial Number
* Don't add VLANs as Ports
* Revert "Don't add VLANs as Ports"
* Remove invalid mempool from tests
* Introduce OS flag to support devices that deliver OIDs out of order
* Add MIB for Bintec Be.IP Plus
* Add YAML definitions for Bintec Be.IP Plus
* Add Bintec be.IP plus test files
* Rename bintec mib files
mib-standards.mib was deleted, because it included definitions that also
existed in separate files
* Add test data
* Remove standard mib files from bintec dir
* Add regex to parse Bintec Be.IP Plus OS version
* Update test data for Bintec Be.IP Plus
* Calculate Bintec Be.IP Plus CPU load from inverse of idle time
* Improve Bintec Be.IP Plus discovery and tests
* Use MIB instead of numerical OIDs where possible
* Update tests to comply with updated discovery
* Remove unused MIBs
* Remove json props that let tests fail
* Update Settings.md
* Remove `snmp_out_of_order_oids` definition from bintec-beip-plus
* Add `-Cc` snmp param for prots module
* Add `-Cc` snmp param for arp-table module
* remove snmp_out_of_order_oids
* Remove snmp_out_of_order_oids
* Update snmp.inc.php
Co-authored-by: Tony Murray <[email protected]>
* Improve Poweralert based devices support
- Add graphs / data for Input Voltage
- Add graphs / data for Total/Output Current
* fix version formatting
* Create poweralert_3.snmprec
* Create poweralert_3.json
* Update poweralert.yaml
* Update poweralert_3.snmprec
* Update poweralert_3.json
* Missed one
Co-authored-by: Tony Murray <[email protected]>
* Add Sophos-XG OID for monitoring HA and license state
* add generic property
* Update MIB to newest version
* Add Test-data for sfosCentralOrchestrationLicRegStatus
* Add IPSec monitoring
* regenerate test-data
* Correctly implement Wireless Sensors for Teltonila RUTX series routers allowing for hardware with multiple modems
Fix sensor warning limits based on hardware specs.
* Re-capture test data for new sensors
* Tidy style
* no message
* no message
* Update RutosRutx.php
Co-authored-by: Jellyfrog <[email protected]>
* Added ambient temp sensor and XUPS alarm OIDs
* I dumbed this down a bit, as I do not fully trust that I actually understand the xups mib.
Now we raise an alert if XUPS-MIB::xupsAlarms.0 is anywhere in the range 1-4
* Changed the index:-value for consistency
* added snmprec and json for my hardware/firwmare version
* reran save-test-data against all variants and renamed my latest snmprec properly
* Update eaton-mgeups_9pxle.json
Co-authored-by: Tony Murray <[email protected]>
* don't hardcode index for Mikrotik LTE wireless statistics
* sync test data now that Mikrotik LTE index is no longer hardcoded
* sync tests data now that Mikrotik LTE index is no longer hardcoded
* fix whitespace
* sync test data now that Mikrotik LTE index is no longer hardcoded
* add test data for Mikrotik LtAP mini (aka RB912R-2nD)
* Re-write Routeros wireless code
It now works like most other devices
* fix style
* update baseline
* Remove station 60G rate
* use base unit of m, not km
* move interface stats name inside loop to avoid a walk when it does exist
* notification
* fix typo
Co-authored-by: Tony Murray <[email protected]>
* remove ^M from DOS style file
* Support for West Mountain 4005i DC PDU
* update SVG to include width attributes
* try adding reserveAspectRatio="xMinYMin meet"
* remove width attribute
* removed disabled modules per @Jellyfrog comment
* rename per PR
* add missing test JSON data
* don't attempt to graph or detect uptime, as neither OID is supported
* remove file extension
* remove specific modules for discovery & polling, as this device isnt buggy enough for justify
* Update westmountainradio.yaml
* Update westmountainradio.yaml
Co-authored-by: Tony Murray <[email protected]>
Peca NesovanovicandGitHub
Heath BarnhartandGitHub
Henne Van OchandGitHub
Arnoud VermeerandGitHub
johnstruseandGitHub
NocturrandGitHub
carranzamarioagustinandGitHub
mathieu-articandGitHub
Martin22andGitHub
David GirónandGitHub
hjcdayandGitHub
martinbergandGitHub
Maikel de BoerandGitHub
Daniel RomeroandGitHub
Denny FriebeandGitHub
Garcia MICHELandGitHub
Dan BakerandGitHub
