* Added rittal-cmc (LCP Plus)
skip_values opperand 'not_in_array' returns an error in pre-commit but in principal it's running. Can someone help?
1) LibreNMS\Tests\YamlTest::testDiscoveryDefinitionSchema
rittal-cmc.yaml does not validate. Violations:
[modules.sensors.fanspeed.data[0].skip_values[0].value] Array value found, but an integer or a string is required
[modules.sensors.temperature.data[0].skip_values[0].value] Array value found, but an integer or a string is required
[modules.sensors.temperature.data[1].skip_values[0].value] Array value found, but an integer or a string is required
[modules.sensors.temperature.data[2].skip_values[0].value] Array value found, but an integer or a string is required
[modules.sensors.temperature.data[3].skip_values[0].value] Array value found, but an integer or a string is required
* fix Scrutinizer Inspection
* fix codeclimate
* fix typo
* Update discovery_schema.json
To allow arrays in comparisons
* Control structures
* fix the pre-fix issues
* Typo in copy/paste
* Update rittal-cmc.json
* Unit1,2,3,4 and new snmprec, json have not changed
* Update rittal-cmc.json
Correct JSON data
* typo copy paste
Co-authored-by: PipoCanaja <[email protected]>
* Asterisk app: add IAX2 peer graphs
* It's an entirely new graph and will not break existing graphs.
* The asterisk extend script must be updated to provide the appropriate poller data.
* The PR for librenms-agent/snmp/asterisk is here: https://github.com/librenms/librenms-agent/pull/274
* code climate, round 1
* clarified unit text
* code climate, round 2
* changes needed to properly generate test data
* linux_asterisk-v1 test data
* Migrate ironware sensor discovery from php to yaml.
* More sensors, add grouping.
* dynamic_discovery_get_value() becomes getValueFromData()
* Target a specific index with skip_values.
* Improve Brocade BGP session discovery/polling
This commit allows for the correct discovery of BGP sessions
with 32-bit ASNs, IPv6 neighbors using the BGP4V2-MIB which is
based on draft-ietf-idr-bgp4-mibv2-11 and also polls for IPv4
unicast received routes through the FOUNDRY-SN-BGP4-GROUP-MIB.
Copied most of the code from PR#8877 by @Mikeburke14, cleaned
up the code a little bit to match the normal LibreNMS style,
and fixed bgpPeers_cbgp discovery as well as polling for the
ipv4.unicast neighbors.
Note that older Brocade IronWare firmware versions are known
to have multiple defects relating to the BGP4V2-MIB which
might result in certain missing non-established neighbors.
Related vendor defect numbers:
- DEFECT000633962
-- Symptom: The OID bgp4V2PeerAdminStatus does not return the
correct value
-- Reported: NI 05.7.00
-- Resolved: NI 05.8.00g
- DEFECT000583319
-- Symptom: SNMP polling on bgp4V2PeerTable (OID brcdIp.3.5.1.1.2)
does not display all the BGP entries
-- Reported: NI 05.6.00
-- Resolved: NI 05.8.00e
- DEFECT000550309
-- Symptom: SNMP polling on bgp4V2PeerTable (OID brcdIp.3.5.1.1.2)
does not display the full information
-- Reported: NI 05.7.00
-- Resolved: NI 05.8.00c
* Add ironware CER & ICX platform test data.
* Re-add ironware.json compatible with current master branch.
* Fix Air Fiber port stats
Define OS port polling includes in a standard way.
Move Air Fiber code to os port polling include.
* Update snmp data
* fix accidental change
* Some formatting fixes
* should be null
* Add version match for newer IOS-XR NCS hardware
* Tested with NCS-5504 and NCS5508
Signed-off-by: Misha Komarovskiy <[email protected]>
* Add test data for Cisco NCS-5504 and NCS-5508
Signed-off-by: Misha Komarovskiy <[email protected]>
* extend FS switches support
* MIB compilation
* HW and Ver
* sensors and CPU
* tests
* correct version
* try to handle properly "down" as not up, for OperStat like lowerLayerDown
* try to handle properly "down" as not up, for OperStat like lowerLayerDown
* try to handle properly "down" as not up, for OperStat like lowerLayerDown
* try to replace "down" with "not up" :)
* fix other ifOperStatus checks
* Don't update ports stats in database when their ifOperStatus is down and their ifLastChange did change
* Don't update ports stats in database when their ifOperStatus is down and their ifLastChange did change
* Don't update ports stats in database when their ifOperStatus is down and their ifLastChange did change
* Update the poll_time, poll_prev and poll_period of all ports in an unique request per device
* Update the poll_time, poll_prev and poll_period of all ports in an unique request per device
* echo debug
* max array_column
* remove print_r for debug
* optimize update of poll_time, poll_prev and poll_period
* optimize update of poll_time, poll_prev and poll_period
* better code readibility
* Add support for TRENDnet switch, TEG-S80ES in particular
* Add trendnet.snmprec
* Add test data (JSON)
* Remove mib comment from yaml
* Update copyright info
* Use sysDescr value for Hardware
* Device Cache
also some additional device related models
* attribs from cache
* replace common attribute functions
* remove legacy cache usage
tidy up some collection manipulation
remove some unused or single use functions
* cleanup some items
* always return a device, to prevent bugs
* clear device cache when testing after each test
* fix double assignment
* Clean up function to take advantage of null object
Only call snmpwalk once, instead of 20, to avoid havin to face up to 20 times the timeout. Decreased drastically polling time on some Cisco 887 / 897 devices
* - update yzyxel mibs
- update definitions für ies series
- slot state and alarm support via yaml
* more sensors
* add new device Zyxel IES4206
* restore original ies files
* revert function stuff
* update to latest official mib
* rebase
* Added Model number detection to old 3Com SWitches
* Added test data
* Added better way to obtain data from Old 3Com StackSwitches
* Removed debug prints
* Added needed mibs
* Removed mibs and changed to oid in script
* Added Original 3com mibs from http://oidref.com/static/mibdepot/*
* Create 3com_4200.json