* New OS: QTECH
https://www.qtech.ru/en/catalog/
* QTECH: Add hardware, version and serial support
* QTECH: Fix platform and software version detection
* QTECH: Add test for QSW-3450
* MPLS updates and bugfixing
* Tests
* tests
* code climate, tests
* tests
* tests
* remove nokiaIfName(), fetch ifName from the database instead
* restore from messed rebase
* tests
* btw, fix travis about the missing docs
* tests
* tests
* clean the messed up test data an generate new for timos
* rebase
It's also possible to do zpool IO from the MIB, but diskIO on
LibreNMS makes a lot of assumptions about it coming from the UCD
MIB.
This changeset adds detection for FreeNAS and TrueNAS - despite
having their own enterprise number, the snmpd uses the FreeBSD
one.
The naming is a bit all over the place, because this reflects
reality - IXSystems produce FreeNAS and TrueNAS, the product lines
have merged to eliminate FreeNAS, but TrueNAS still calls itself
FreeNAS everywhere except the GUI.
* Add OS detection for Greenbone appliances
They don't expose anything fancy over SNMP, but this makes them
display interface names correctly. Under the hood they're unix-y.
Greenbone logo is from the AGPLv3 gsa, which is GPL compatible:
https://github.com/greenbone/gsa/blob/master/gsa/public/img/greenbone.svg
The mib is included for completeness, but it doesn't expose any
graphable values.
* Fix the vendor's logo
* OS detection and sensors for Dell Compellent
... or Dell storage as it is now known. Under the hood it's
referred to as Compellent, so I've named it as that to avoid
confusion.
It is not part of the Dell group or using the Dell MIB folder -
Dell have doubled up on some OID definitions, which means the MIB
here and a couple of the existing ones conflict.
The change adds OS detection and a frankly ludicrous amount of
sensors. I have access to a relatively low end device, so at the
moment everything under *ctlr* is my best guess based on the other
table layouts.
* Set sensor state_name to avoid collisions
* Regenerate test data
* Add Advantech logo.
Taken from https://commons.wikimedia.org/wiki/File:Advantech_logo.svg
with minor edits (removed width and height).
* Add Advantech MIB files.
* Add Advantech definitions.
* Add suppor for version and hardware polling.
* Add advantech snmp recording.
* Add sensors for SFP ports
Each SFP will have temperature, voltage, tx bias, Tx/Rx power.
Also update snmp recording to include new data.
* Rename ADVANTECH-EKI-PRONEER-MIB_1_01.mib to ADVANTECH-EKI-PRONEER-MIB
* Rename advantech-common-mib.mib to ADVANTECH-COMMON-MIB
* Update advantech.yaml
* Update advantech.svg
* Create advantech.json
Co-authored-by: PipoCanaja <38363551+PipoCanaja@users.noreply.github.com>
* Added support for ICT Modular Power System and ICT Sine Wave Inverter
* Added SNMP test data for ICT Modular Power System and ICT Sine Wave Inverter
* Fixed styling errors and refactored state sensor for ICT Sine Wave Inverter
* Fixed newly created styling issues from refactoring ICT Sine Wave Inverter files.
* Fixed further styling errors from previous changed to appease Travis CI
* Removed unnecessary math from ICT Sine Wave Inverter voltage sensor
* Cleaned up unnecessary lines in ict-mps/ict-swi sensors. Moved from snmp_get to snmp_get_multi in ict-mps/ict-swi os pollers.
* Added test data for ICT MPS and SWI
* Fixed issue with load sensor not discovering
* Update snmpget to snmp_get
Co-Authored-By: Jellyfrog <Jellyfrog@users.noreply.github.com>
* Updated test data post-fixing sensor detection issue on ICT Sine Wave Inverters
* Moved ict-swi and ict-mps from legacy to yaml sensors
* Removed legacy code for ict-mps and ict-swi sensors
* Last commit mistakenly removed OS polling from ict-mps and ict-swi
* Fixed formatting for OS polling and updated test data for ict-mps and ict-swi
Co-authored-by: Jellyfrog <Jellyfrog@users.noreply.github.com>
* ascom support
* tests
* typo
* Correct missing 'mpls' in misc/os_schema.json
* remove mpls for now
* tests
* Update ascom.svg
* Don't disable already disabled modules
As I usually state, not much gain in disabling these here. Would be better to optimize the modules if you think they take too long on devices that don't have support.
* refactor polling code
Co-authored-by: Tony Murray <murraytony@gmail.com>
* Create MAS-MIB-SMIV2-MIB
This is the SNMP v2 MIB Object Definitions for a Citrix ADM
* Copy/Paste error
Co-authored-by: PipoCanaja <38363551+PipoCanaja@users.noreply.github.com>
From: http://www.net-snmp.org/docs/mibs/UCD-SNMP-MIB.txt
As per #11235, CPU Steal graphs not appearing as LibreNMS Mib is out of date and doesn't understand the definition. This original file hasn't been updated since 2006, and this new version was last updated in 2009.
* Added rittal-cmc (LCP Plus)
skip_values opperand 'not_in_array' returns an error in pre-commit but in principal it's running. Can someone help?
1) LibreNMS\Tests\YamlTest::testDiscoveryDefinitionSchema
rittal-cmc.yaml does not validate. Violations:
[modules.sensors.fanspeed.data[0].skip_values[0].value] Array value found, but an integer or a string is required
[modules.sensors.temperature.data[0].skip_values[0].value] Array value found, but an integer or a string is required
[modules.sensors.temperature.data[1].skip_values[0].value] Array value found, but an integer or a string is required
[modules.sensors.temperature.data[2].skip_values[0].value] Array value found, but an integer or a string is required
[modules.sensors.temperature.data[3].skip_values[0].value] Array value found, but an integer or a string is required
* fix Scrutinizer Inspection
* fix codeclimate
* fix typo
* Update discovery_schema.json
To allow arrays in comparisons
* Control structures
* fix the pre-fix issues
* Typo in copy/paste
* Update rittal-cmc.json
* Unit1,2,3,4 and new snmprec, json have not changed
* Update rittal-cmc.json
Correct JSON data
* typo copy paste
Co-authored-by: PipoCanaja <38363551+PipoCanaja@users.noreply.github.com>
* Added WUT 57606,57613,57720
* Added os wut-*
* fixed MIB Names and try to generalize wut
* more general sysObjectID mapping, and mib directory
* Delete WUT-57606-MIB
* Delete WUT-57613-MIB
* Delete WUT-57720-MIB
* Rename wut-57613.snmprec to wut_57613.snmprec
* Rename wut-57720.snmprec to wut_57720.snmprec
* Rename wut-57606.snmprec to wut_57606.snmprec
* Delete wut-57606.yaml
* Delete wut-57720.yaml
* Delete wut-57613.yaml
* Delete wut-57606.yaml
* Delete wut-57720.yaml
* Delete wut-57613.yaml
* Update wut.yaml
* Try to correct the Temperature part
This should work for temperature, according to MIB. Pressure and Humidity are not described in this mibfile, so we cannot poll them.
* change wut.yaml
* Add and fix wut_57720
* after ./scripts/save-test-data.php ?
* Add test data
Co-authored-by: PipoCanaja <38363551+PipoCanaja@users.noreply.github.com>
* extend FS switches support
* MIB compilation
* HW and Ver
* sensors and CPU
* tests
* correct version
* try to handle properly "down" as not up, for OperStat like lowerLayerDown
* try to handle properly "down" as not up, for OperStat like lowerLayerDown
* try to handle properly "down" as not up, for OperStat like lowerLayerDown
* try to replace "down" with "not up" :)
* fix other ifOperStatus checks
* update nokia mibs
* database migrations
* add code
* html code
* update db schema
* add test data
* add FIXME
* move mibs/nokia/MPLS-TE-MIB to mibs/MPLS-TE-MIB
Alexander Moisseev
Vitali Kari
Adam Bishop
Wheel
mathieu-oui
Jozef Rebjak
Mikkel Mondrup Kristensen
Noah Roufus
dneto82
PipoCanaja
Martin22
Martin22
jp-asdf
Jay Shepherd
Kevin Zink
SourceDoctor
Heath Barnhart
O Palivan
Arjit Chaudhary
hartred
jayceeemperador
