* vrp-improve
* add bgp4 data, and get errors
* Fix WRONG Type error on bgpPeerRemoteAs + handle ErrorSubCode in a generic way
* fixing tests
* clean
* improve state backup to BGP4-MIB
* tests with corrected data
* tests
* restore original tests/data/vrp_5720.json
* BGP Polling: Add error code polling
* Rework describe_bgp_error_code and fix bgp error fields migration
* Add real test data for IOS-XR and Arista EOS
* ipv6 support for BGP routes in VRP devices
* reverse bgpPeers array to allow VRF aware BGP
* codeclimate
* codeclimate
* codeclimate, finally
* Split VRP out of bgp-peers for readabilty
* Split VRP out of bgp-peers for readabilty
* tests
* CodeClimate
* improve function description
* improve function description
* v6data
* rebase
* space
* ipv6 support for BGP routes in VRP devices
* reverse bgpPeers array to allow VRF aware BGP
* codeclimate
* codeclimate
* codeclimate, finally
* Split VRP out of bgp-peers for readabilty
* Split VRP out of bgp-peers for readabilty
* tests
* CodeClimate
* improve function description
* improve function description
* v6data
* rebase
* space
* fixed corner case
* Migrate ironware sensor discovery from php to yaml.
* More sensors, add grouping.
* dynamic_discovery_get_value() becomes getValueFromData()
* Target a specific index with skip_values.
* Improve Brocade BGP session discovery/polling
This commit allows for the correct discovery of BGP sessions
with 32-bit ASNs, IPv6 neighbors using the BGP4V2-MIB which is
based on draft-ietf-idr-bgp4-mibv2-11 and also polls for IPv4
unicast received routes through the FOUNDRY-SN-BGP4-GROUP-MIB.
Copied most of the code from PR#8877 by @Mikeburke14, cleaned
up the code a little bit to match the normal LibreNMS style,
and fixed bgpPeers_cbgp discovery as well as polling for the
ipv4.unicast neighbors.
Note that older Brocade IronWare firmware versions are known
to have multiple defects relating to the BGP4V2-MIB which
might result in certain missing non-established neighbors.
Related vendor defect numbers:
- DEFECT000633962
-- Symptom: The OID bgp4V2PeerAdminStatus does not return the
correct value
-- Reported: NI 05.7.00
-- Resolved: NI 05.8.00g
- DEFECT000583319
-- Symptom: SNMP polling on bgp4V2PeerTable (OID brcdIp.3.5.1.1.2)
does not display all the BGP entries
-- Reported: NI 05.6.00
-- Resolved: NI 05.8.00e
- DEFECT000550309
-- Symptom: SNMP polling on bgp4V2PeerTable (OID brcdIp.3.5.1.1.2)
does not display the full information
-- Reported: NI 05.7.00
-- Resolved: NI 05.8.00c
* Add ironware CER & ICX platform test data.
* Re-add ironware.json compatible with current master branch.
The values in the $peer['c_update'][$oid] array are set only if they have
changed. If the value has not changed, then zero is substituted for real
values, which leads to incorrect calculation of delta values and records
in the database:
SELECT AcceptedPrefixes,AcceptedPrefixes_prev,AcceptedPrefixes_delta
FROM bgpPeers_cbgp
WHERE device_id=115;
| AcceptedPrefixes | AcceptedPrefixes_prev | AcceptedPrefixes_delta |
|------------------|-----------------------|------------------------|
| 21 | 21 | -21 |
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
After you are done testing, you can remove the changes with `./scripts/github-remove`. If there are schema changes, you can ask on discord how to revert.
Use Log facility when Laravel is booted.
Update init.php so we can easily boot Laravel for CLI scripts. (and just Eloquent, but that may go away)
Move all debug setup into set_debug() function and use that across all scripts.
Log Laravel database queries.
Send debug output to librenms log file when enabling debug in the webui.
Allow for colorized Log CLI output. (currently will leave % tags in log file output)
** Needs testing and perhaps tweaking still.
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
* bgp-peers update
Use IP parsing library more effectively.
Fix update issue
Include comware bgp-peers test data
deeper refactoring
Allow JunOS fallback to BGP4-MIB, some models only use that.
Add junos bgp4 data
Actually update all bpg data in the poller
* fix arista data. refactor some to prevent missing data from mucking things up
* refactor to use $oid_map for BGP4-MIB too
* A few comments to break up teh file a bit
* Junos bgp data an a quick revert for now.
* small cleanup
* fix ios bgp polling, add test data
* check the correct variable
* Test Data
* fix bugs in bgp-peers poller
peer data in wrong format
array_diff doesn't work right, change to array_diff_assoc
astext is too short for some
* Refactor remove use of pear Net_IPv4 and Net_IPv6
Caution, I added tests to test the functionality of the new functions, but I'm not 100% certain the replaced usages match 100%. Please test.
Left usage in generate-iplist.php because I'm not sure the use of that script, so I didn't want to implement additional functionality to support it.
Add support for ipv6 fo ipInNetwork() function
Add phpdocs to functions
Remove accidental inclusion
Use binary operations instead of string for networKFromIp()
Tidy up binary operations in ipInNetwork()
tidy parsing cidr network
Change to a class based implementation.
Update phpdocs.
Fully catch exceptions for hex parsing.
Fix mistake.
support older phpunit versions
Fix php shifting to negative with php 5
* Fix graph authorization. Uncaught exception and checking an ipv4 against an ipv6 network == fail.
* Also remove colons from hex strings.
* Fix typo in bgp polling
Two passes of removing invalid characters from hex strings. (That way we don't mangle valid IPs)
* feature: Allow customisation of rrd step/heartbeat when creating new rrd files
* revert defaults
* added docs + webui config option
* Move RrdDefinition to an Object to make them easier to create and remove the possibility of typos.
* Fix style/lint issues and missing use statements
* 3 more missing use statements
* updated doc + moved schema file
* New event log severity model
* Revert "New event log severity model"
This reverts commit 0783527af8.
* New event log severity model
* Fixed spaces vs tabs
* Learning the format requirements
* Learning the format requirements
* Moved the colours in to the stylesheet
* change SQL file to stop conflicting
* refactor log_event so severity isn't last, but reference is.
* keep having to move the file due to new PR conflicts
* Revert "keep having to move the file due to new PR conflicts"
This reverts commit f3030e7218.
* extended support to dashboard and eventlog page
* formatting
* refactor: Centralize MIB include directory specification
The default is now:
```
$config['mib_dir'].'/mibdirname:'.$config['mib_dir']
```
This means we exclude OS mibs and only use ours (we could prepend `+` if we want to include os mibs.
All snmp calls should only include the name of the subdirectory under the mibs directory.
* Remove d_echo from Proc
Fix snmpsim tests.
Use data_update instead of rrd_update/rrd_create and influx_update
Centralize rrd file check so we can check against a remote rrdcached server too
Use rrd_name() to generate rrd file names
Jellyfrog
PipoCanaja
Damon Reed
Mathieu Poussin
Tony Murray
Martijn Schmidt
Martijn Schmidt
Vitali Kari
hexdump0x0200
Misha Komarovskiy
Neil Lathwood
Richard Mayhew
Dave Bell
HenocKA