* Add support for sending events to Sensu
Sensu is an alerting and monitoring service (and much more) that has a
nagios compatible check API.
This transport translates LibreNMS alerts into Sensu events, and sends
them to the agent API running on the same host as the poller.
The transport has a few options, but none of them are required - if the
Sensu agent is correctly configured, alerts will be sent as soon as the
transport is enabled.
There's a fair amount of code, as I've tried to translate as much data as
possible between LibreNMS and Sensu.
* Update Transports.md
* If alerted is 0, send an "ok" alert dated rrd.step / 2 seconds ago
This makes Sensu aware of the last time the check ran successfully (ish).
If we don't send the initial "ok", Sensu will either display 'unknown',
or an incorrectly high duration for the incident.
Alerted gets set to 1 after the first alert is sent.
We choose rrd.step / 2 as:
* rrd.step is the maximum time ago the check could have succeeded
* we halve it, so that if a check is flapping, it is not masked
Basically, we guess that the check fails around halfway through the time
since the poller last ran.
* Add additional metadata
* Improve codeclimate slightly
* Consider names that are 2 or 3 components long
* Add quotes around the word mail
The word 'mail' needs quotes around it so php will use it as a string instead of a variable name.
* Double quotes to Single as is in the rest
* extend FS switches support
* MIB compilation
* HW and Ver
* sensors and CPU
* tests
* correct version
* try to handle properly "down" as not up, for OperStat like lowerLayerDown
* try to handle properly "down" as not up, for OperStat like lowerLayerDown
* try to handle properly "down" as not up, for OperStat like lowerLayerDown
* try to replace "down" with "not up" :)
* fix other ifOperStatus checks
Removed the old doc that has an email address entered by comas, this is no longer needed with transports. A admin can make transport for each user or make a group of users.
* Add Headers and body
add PUT Method
* fix check length of headers
* bad commit
* style check
* better body description
* Descr and RFC enforcement on 'PUT' and body
Only PUT can accept a statically defined body. GET will ignore it (RFC) and POST body is generated with the parameters.
* Process the variables as well for headers
* Update Api.php
* update docs
* Transport API - Doc for placeholders
The available placeholders are the same as the Templates documentation but the syntax is not exactly identical.
* Update Transports.md
* Update Transports.md
* Update Transports.md
* Add support for using Markdown.
Alert templates can be written using Webex Teams (i.e., Spark) Markdown,
which makes for some richer alerts. This option defaults to false to
maintain Principle of Least Astonishment.
* Update Cisco Spark docs.
* Mention that Cisco Spark is now called Webex Teams
* Add support for Markdown
* Refactor text.
Do not exceed 80 characters per line.
* Refactor code to meet style guidelines.
* Remove errant tabs and use spaces instead
* Correct type check
* Remove use of 'else'
* Allow new {{ $xxxx }} syntax
* Properly handle urlencode on variable values without braking the URL, and uses Blades
* Doc
Doc typo
* use Guzzle for HTTP requests
* Add Basic auth support
* Doc update
* clean
* Revert Blades, but keep the {{ $xxxx }} syntax
* Revert Blades, but keep the {{ $xxxx }} syntax
* Init Vars and comments
* Notifications
* api-options are not required
* Update notifications.rss
* clean up all but header incrementing in Creating-Transport.md
* make Device-Dependencies.md mdl happy
* make Entities.md as mdl happy as possible... one long table line left
* make mdl as happy as possible for index.md
* clean up Introduction.md as much as possible
* minor formatting cleanup... move each icon onto its own row
* make ack and notes the same style
* clean Macros.md up
* clean Rules.md up as much as possible
* tweak one line a bit to get it to format a bit nicer
* a bit more format tweaking, making sure it does not sure with >
* clean up as much as possible for Templates.md
* make Testing.md as mdl happy as possibly
* clean Transports.md up as much as possible
* clean as many issues as possible for Alerts.md
* clean up as much of ARP.md as possible
* clean up as much as possible for Bills.md
* make DeviceGroups.md as mdl happy as possible
* cleanup Devices.md
* make as mdl happy as possible Inventory.md and index.md
* mdl cleanup for Logs.md and PortGroups.md
* make Ports.md and Routing.md as happy as possible
* clean up Services.md, Switching.md, and Systems.md as much as possible
* more markup cleanup
* lots more md cleanup udner Devloping/
* reapply bits from #10343 that accidentally got removed when merging
* Change in the Canopsis transport to make it 3.9.0 compliant and link to
the new documentation
* Add missing php72 module on Centos
* Fixing documentation for AMQP based tranport outside of the main doc
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
After you are done testing, you can remove the changes with `./scripts/github-remove`. If there are schema changes, you can ask on discord how to revert.
This patch allows you to avoid manually adding a transport to the list of available transports. In addition, in custom installations, where their own transports were added, the need to manually update the file "html/includes/modal/edit_alert_transport.inc.php" broke the automatic update (git detected a conflict and required manual solution). With this patch, you can avoid this, add local transports that remain outside the git repository and there is no need to create and maintain your fork in order to add your transports or add them to the upstream (they may have no value outside the local installation).
* Correct sound for pushover.net
pushover.net should now use sound= instead of critical.
* Added pushover config examples for all severities.
Added pushover config examples for all severities.
* Add format field to Telegram Messages
Added Telegram field to send formatted messages as Mardown or HTML
* Update Telegram.php
* Correct Mistypo.
* Correct mistypo
* Correct Mistypo
* Correct mistypo
* Update Transports.md
* Add Format field on Telegram Examples
* Change Telegram Format field to type select
* Add "blank" option to Format field
* Update Telegram.php
* Update Telegram.php
* Update Telegram.php
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
After you are done testing, you can remove the changes with `./scripts/github-remove`. If there are schema changes, you can ask on discord how to revert.
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [X] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
After you are done testing, you can remove the changes with `./scripts/github-remove`. If there are schema changes, you can ask on discord how to revert.
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
After you are done testing, you can remove the changes with `./scripts/github-remove`. If there are schema changes, you can ask on discord how to revert.
* Added support for AVG in rules
* More updates
* Final work to have advanced sql queries
* Added missing use
* Fix exception when invalid json is passed
* Fixed api for alert rules
* updated docs
* Updated example for new alerting engine
Using the example of port utilization caused errors when trying to use it with the new alert system. Putting variables in curly braces and removing php calls resolved it. Updating docs to reflect this.
Also removed examples with hash tags in the body of the template as pasting this in will cause syntax errors by the alerts script.
* Update Templates.md
just found a little syntax error in the docs, nothing special :)
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 9145`
* Converted PagerDuty to new transport format
* Attempt at oauth for transports
* clean
* missing images
* reverted wrong file. phpstorm saved me...
* fix typo
* Updated to help the display
* Fix validation error, start to try to send alerts.
Editing the transport, deletes the service_key...
* Ignore hidden config options
* Fix up api call, proper feedback.
* hide oauth field in print list
I added some description how to attach templates to rules, because this was not very obvious to me.
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
Hello! I've made a first version of Alert Transporting module for Kayako Classic Servicedesk. May be it is possible to use with Kayako OnPremise version (not sure).
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [ ] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
Fix errors in `Service Alert` template example.
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
