It's also possible to do zpool IO from the MIB, but diskIO on
LibreNMS makes a lot of assumptions about it coming from the UCD
MIB.
This changeset adds detection for FreeNAS and TrueNAS - despite
having their own enterprise number, the snmpd uses the FreeBSD
one.
The naming is a bit all over the place, because this reflects
reality - IXSystems produce FreeNAS and TrueNAS, the product lines
have merged to eliminate FreeNAS, but TrueNAS still calls itself
FreeNAS everywhere except the GUI.
* opengear MemPools
Discovery and Polling of opengear mempools - opengear Detail Memory Usage is already collected however that can not be used to trigger rules.
* add test
opengear mempools tests
* remove newline
* Added sensors for outlets on Schleifenbauer devices. Also use the outlet name when configured.
* Updated tests for Schleifenbauer
* Fixed on test for Schleifenbauer
* Optimized polling by retriving only outlets from the device with the network connection, not all devices on the data-bus.
* Fixed code styling
* Use shorthand comparisons for names
* Fix for conflicting $entPhysicalIndex
* Sev and Rel terminology varies between devices
* Most temp sensors don't have low limits, so adding
* update test data
Co-authored-by: Tony Murray <murraytony@gmail.com>
* ipv6 support for BGP routes in VRP devices
* reverse bgpPeers array to allow VRF aware BGP
* codeclimate
* codeclimate
* codeclimate, finally
* Split VRP out of bgp-peers for readabilty
* Split VRP out of bgp-peers for readabilty
* tests
* CodeClimate
* improve function description
* improve function description
* v6data
* rebase
* space
* ipv6 support for BGP routes in VRP devices
* reverse bgpPeers array to allow VRF aware BGP
* codeclimate
* codeclimate
* codeclimate, finally
* Split VRP out of bgp-peers for readabilty
* Split VRP out of bgp-peers for readabilty
* tests
* CodeClimate
* improve function description
* improve function description
* v6data
* rebase
* space
* fixed corner case
* Changed USV bypass state from alert to warning
* add /opt/librenms/tests/data/dell-ups_tower1000w.json
* add deltaups.json
* orvaldi-ups
* add generex-ups.json
* include two more generex-ups variants
* add eaton-mgeups_5px.json
* add tree more
* add istars.json
* restart hanging CI
* Migrate ironware sensor discovery from php to yaml.
* More sensors, add grouping.
* dynamic_discovery_get_value() becomes getValueFromData()
* Target a specific index with skip_values.
* Improve Brocade BGP session discovery/polling
This commit allows for the correct discovery of BGP sessions
with 32-bit ASNs, IPv6 neighbors using the BGP4V2-MIB which is
based on draft-ietf-idr-bgp4-mibv2-11 and also polls for IPv4
unicast received routes through the FOUNDRY-SN-BGP4-GROUP-MIB.
Copied most of the code from PR#8877 by @Mikeburke14, cleaned
up the code a little bit to match the normal LibreNMS style,
and fixed bgpPeers_cbgp discovery as well as polling for the
ipv4.unicast neighbors.
Note that older Brocade IronWare firmware versions are known
to have multiple defects relating to the BGP4V2-MIB which
might result in certain missing non-established neighbors.
Related vendor defect numbers:
- DEFECT000633962
-- Symptom: The OID bgp4V2PeerAdminStatus does not return the
correct value
-- Reported: NI 05.7.00
-- Resolved: NI 05.8.00g
- DEFECT000583319
-- Symptom: SNMP polling on bgp4V2PeerTable (OID brcdIp.3.5.1.1.2)
does not display all the BGP entries
-- Reported: NI 05.6.00
-- Resolved: NI 05.8.00e
- DEFECT000550309
-- Symptom: SNMP polling on bgp4V2PeerTable (OID brcdIp.3.5.1.1.2)
does not display the full information
-- Reported: NI 05.7.00
-- Resolved: NI 05.8.00c
* Add ironware CER & ICX platform test data.
* Re-add ironware.json compatible with current master branch.
* Add bad_ifoperstatus for filtering interfaces having a status for example notPresent
* Add bad_ifoperstatus for filtering interfaces having a status for example notPresent
* Add bad_ifoperstatus for filtering interfaces having a status for example notPresent
* Fix Siklu Voltage
* Update tests
* Another test fix attempt
* Decimals..
* Ok, enough.
* Restore currently used index value and correctly push num_oid
* Update siklu.json
Co-authored-by: PipoCanaja <38363551+PipoCanaja@users.noreply.github.com>
* fix SQLSTATE[23000]: Integrity constraint violation: 1048 Column 'port_id' cannot be null
* If $entry['port_id'] truly is null (on insert) then Illuminate throws a fatal error and all subsequent processing stops.
* Cisco ISO (and others) may have null ids. We still want them inserted as new
* strings work with DB::table->insert().
Avoid writing "0" as port id when the data came back incomplete from the snmp poll, and when the existing data in the DB already contains a port. Keep the existing port id instead.
* Add FDB support for ArubaOS; modify some SNMP calls to allow community string indexing
* Apply coding styles, changed arubaos.inc.php comment headers
* Coding style
* Modify per items discussed at pull 10940
* ArubaOS test data
* ArubaOS header doc
Co-authored-by: PipoCanaja <38363551+PipoCanaja@users.noreply.github.com>
* Initial stab at switch input state sensor
* Fix indentions
* Fix indentions
* Index updates
* More useless changes.
* And it finally works.
* Open should be a WARNING state.
* Update email
* Add line
* One empty line, not three.
* This is getting ridic.
* Add test data
* Clean broken VRF lite code
* Change DB table for route discovery
* Add VRF simple support
* add port_id to db and discovery
* static-fy the translation arrays
* sort and search cleaning
* Sorting refactor and validation
* formatItem shortened
* Handle ifIndex==0 meaning no next hop defined (MPLS)
* Sync all create/updates
* purge in daily
* remove old route table
* get rid of inetCidrRouteNextHop_device_id
* fix wonky column orders
* add route snmprec
* fix sorting by interface
* Move to new config
* rename to route the new table
* Properly display ipv6 compressed addresses
* Translation before merge ./lnms translation:generate
* Update manifest
* Device Cache
also some additional device related models
* attribs from cache
* replace common attribute functions
* remove legacy cache usage
tidy up some collection manipulation
remove some unused or single use functions
* cleanup some items
* always return a device, to prevent bugs
* clear device cache when testing after each test
* fix double assignment
* Clean up function to take advantage of null object
* - update yzyxel mibs
- update definitions für ies series
- slot state and alarm support via yaml
* more sensors
* add new device Zyxel IES4206
* restore original ies files
* revert function stuff
* update to latest official mib
* rebase
