* Junos dwdm interface sensor support …
four new sensors
Chromatic Dispersion ps/nm
Delay s (seconds)
Q_factor (dB)
preFEC_BER (ratio)
reuse of
SNR, dbm, temperature, current
* new dwdm sensors more generic, ber and quality_factor
* new sensors updated
* renamed html graphs new sensors
* fixed ber polling
* Change to base SI Hz and s.
* update sensor divisors to bigint
* rename sql-schema/216.sql to 218.sql
* YAML junos dwmd sensor definitions, except BER
* bigint divisor fixed
* deafult 1 divisior
* small fixes including schema change for another PR
* schema fix
* Inital cambium refactor
* Refactored tests
* Remove CMM from pmp group
* Add sensors / Give CMM individual OS
* Fix linting
* More Sensors / states and Revised Headers
* Added old graphs / more sensors
* Add modulation rate to sensor
* Fix Hardware detection bug
* Further hardware detection refinments
* Modify pmp hardware detection
* New Wireless Metric - SSR
* SSR Sensor Graph
* Migrate SSR to metric
* Added last metric file
* Add master check to isAp method
* Fix variables in epmp
* CMM Discovery and state addition
* Add another test for cmm
* refactor: remove duplicated data collection in old wifi module
Still a bit more work before we can fully remove it
* remove unused graphs
update overview graphs for some wireless os
* Add ability to get Freeswitch application data via snmp
On your Freeswitch server install the script from
https://github.com/librenms/librenms-agent/blob/master/agent-local/freeswitch
into /etc/snmp, make it executable and adjust it to your installation.
Configure your snmpd to use the sript as an extension. For example on Debian
add the following line to your /etc/snmp/snmpd.conf:
extend freeswitch /etc/snmp/freeswitch
Activate the Freeswitch application for your server on your LibreNMS server.
it should now start to receive data from your Freeswitch server via snmp.
* Graph "Calls" and "Channels" of Freeswitch agent
The Freeswitch agent sends Calls and Channels count and they weren't graphed
up to now. This is especially useful in settings where the Freeswitch
server does not act as a Gateway and thus the agent does not sent
Incoming and Outgoing Call numbers.
* Cleanup commented code and add myself to authors
* Fixed IPv6 host renaming
* Added get_rrd_dir() and modified other files to use it where appropriate.
* rrd_name() now uses the new function get_rrd_dir(), to make it simpler to modify the escaping in the future.
* Wrong function name in rrdstep.php
Graphs that were using `file_exists()` to check for the presence of RRD
files now use `rrdtool_check_rrd_exists()` instead. This is a fix for
distributed poller configurations that are running `rrdcached` on a
different host.
* newdevice: Add connected AP count for Cisco WLCs
Adds ap-count wireless sensor type
fixes: #4295
* better detection
Update the overview graph to the new one
* add BIND named poller
* add BIND named graphs
* add BIND stuff
* add the color pallete used by this
* add app support
* white space cleanup
* document the bind stuff
* expand the linux package stuff a bit
* note the agent and zero_stats value
* now include the $mib stuff
* white space cleanup
* whoops, add the update app bit
* correct a error added when merging
* readd copyright info
* note myself in the copyright info
* feature: Wireless Sensors
Includes client counts for ios and unifi
Graphing could use some improvement.
Alerting and threshold ui not implemented
WIP: starting OO based wireless sensors.
Class based functionality working
remove old functional files
add schema file
discovery needs to be enabled, not polling
fix up schema
fix Unifi discovery not returning an array
Add some debug when discovering a sensor.
Fix style.
Add missing semicolin
Add a null object (Generic) for OS.
Fill out some phpdocs
Re-organized code
Each sensor type now has it's own discovery and polling interface
Custom polling tested with Unifi CCQ
Left to do:
Implement UI (Graphs and Custom thresholds)
Alerting
Testing
Fix event message text
Remove runDiscovery and runPolling from OS, they are unused and don't belong there.
Cleanups/docs
Missed this file.
Remove the requirement to fetch the current value to check validity.
Do that automatically if current is not specified
A few cleanups here and there
First pass at graphing.
device_ and wireless_ graphs added.
Add RouterOS support
Singleton OS instance isn't required right now.
Remove that to allow some memory to be freed.
Add wireless to the device list metrics.
Make all metrics clickable
Tweak graphs a bit
Implement limit configuration page.
Use sensors page as common code instead of duplicating.
Clean up some javascript interactions: Allow enter on values to save. Cancel if update is not needed. Enable the clear custom button after setting a custom value.
Add some wireless alert rules to the library.
Add documentation.
Add unifi client counts by ssid in addition to radio.
Optimize Sensor polling a bit.
Add HP MSM clients support (for full controller)
Fix function accessibility
Formalize the discovery and poller interfaces.
Add Xirrus clients and noise floor
move module interfaces to a more appropriate place.
push caching code up to os, unsure about this do to the limitations
No point in selectively enabling wireless discovery. We only discover if the device supports something.
Add RSSI, Power, and Rate.
Add these sensors for Ubnt Airos.
Clean up some copyrights.
Reduce the amount of files need to add new types.
Leave graph files for consistency and to allow customization.
Remove the old wifi clients graph completely.
ciscowlc should have improved counts (total and per-ssid)
Schema didn't get added.
Impelement the rest of the AirOS sensors
Reformat and re-organize the Airos.php class.
Add several UBNT AirFiber sensors
A few fixes add links to the section headers
Add HP MSM mibs.
* Schema file got dropped in rebase.
* Add wireless menu to view sensors across all devices.
Icons in the menu need help :/
* Add HeliOS, Mimosa, and Siklu support
Sensors added SNR + Noise
* Add power and utilization to Unifi
* Update polling to prefetch all sensor data in a few snmp requests as possible
* Add Extendair: tx+rx power, aggregate rate, frequency
* Add a check for duplicate sensors in discovery. Just print an error for now.
* Add Bit Error Ratio (named error-ratio to allow for bit error rate to be added if needed)
Fix an incorrect link in the wireless sensors table
* Add error rate and change all bps and Hz to use si units
* Fixes to limits and frequency display
* Fix overview graph frequency display
A few decimal place tweaks
* Don't allow switching sensor and wireless-sensor graphs, it doesn't work.
Change individual distance graphs to use si units
* Go through the OS and make sure I got all the sensors I can (probably missed some still)
Because pollWirelessChannelAsFrequency() is generic and a little complex, so pull it up to OS.
Message to help developers adding supports that don't return an array from discover functions.
* Fix some issues
* Remove noise and signal for now at least
A couple more fixes
Add a notification
* Oopsie
* Bonus AirFiber sensors
* update
just realized the pull script is a bad idea. not really portable. no
nfsv2 stats for centos 7+
* some php errors
* fixed v4ops
removed nfs-server.sh, as only cat /proc/net/rpc/nfsd is needed as an
extend.
* split rrd
split rrd to store and pull them seperatly
* scrutinizer-ci fix
scrutinizer-ci fix
* phpcbf
* messed up
* stuck, please ignore
* applied reviews murrant suggestions
applied reviews murrant suggestions
* dirty scope
dirty scope was the issue
* style fix ?
* style PSR2
* file handle chart
* fixed style + added documentation
* applied review tasks by murrant, thx murrant!
* applied laf's review, also added tabs in the view to reduce the amount of graphs per page
* opengridscheduler job tracker
* wrong copy of file
* applied laf's review. Thx laf!
* now including the modified files; thx laf for the review!
* Update Applications.md
* now creates a component with all the DBs in it
* add the function get_postgres_databases
* add multi DB support to the Postgres device app page
* add multi DB support to the Postgres graphs
* whoops removed the udpate bit, readd it
* white space cleanup
* now use json for storing DB names
* provide the list of DBs in a cleaner manner
* Update postgres.inc.php
* refactor: Moved ifLabel -> cleanPort and updated the usage
* added list of tags allowed
* few updates as per comments from @murrant
* Added simple unit tests
* double display for javascript popover
* Remove ifNameDescr() function
Fix realtime port page
* remove accidental temp code
* Remove double display calls in ajax tables
* fix: Change rfc1628 'state' (est. runtime and on battery) to runtime
* Fix up the graph error ( : in ds name).
Change seconds on battery to minutes so the value is in minutes
* wrong scale for limits
* Don't use snmp_walk
