* Vmware vminfo
Remove legacy file and migrate to OS discovery
* tighter
* ios_stp-vlans working correctly now
* Make vmwVmGuestOS nullable
* Discover os info too
* VM Info module
* Apply fixes from StyleCI
* Fix log severity
* Fix log severity (more)
* VM Info module
* Poll with ESXi too because it is lightweight
add test data
* poller data now too
---------
Co-authored-by: StyleCI Bot <bot@styleci.io>
* Refactor poller to allow modules to run even if the device is down
Include core in config (but not webui) to avoid silly shenanigans
Inject datastore into polling
* Needed to split datastore interface
* Cleanup some data_udpate() references
* Apply fixes from StyleCI
* Fix legacy poller :D
* Output to the correct stream
* Fix lint issues
* Apply fixes from StyleCI
* Fix discovery not including core and submodule handling
* Use whereRaw
---------
Co-authored-by: StyleCI Bot <bot@styleci.io>
* STP module rewrite WIP
* Finish rewrite
* Ignore disabled and log root/topology changes
* Remove interfaces for now
* fix style
* Lint fixes
* Document ResolvesPortIds and hide map functions
* whitespace fixes
* Revert to stpInstances in case someone writes mstp support
* missed one
* phpstan fixes
* Handle table and oids separately
* forgot to register observer
* Test data and correct non-table handling in SnmpResponse->table()
* update test
* test data
* revert aos7 silly things
* minimal polling
* Update test data
* order ports_ntp and rename new field to port_index
* forgot the db_schema
* revert ciena-sds port things
* MSTP support, maybe
* Adding test data
* Filter bad lines instead of discarding the entire snmp response
and capture fixes and test data
* fresh data
* add os data
* update data, ignore unfound ports, obviously bad device implementation.
* fixes
* Ignore context files in os detection test
* Remove empty table data
* add ciena-sds vlan
* designatedCost column is too small
* Update stp webui
* Refactor code to interfaces, to allow vendor mibs
* update schema
* fix issues added by abstraction
* STP fixes
* Default to no context for vlan 1
* never store vlan 1
* Update test data
* remove eltex brokenness
* fix style
* fix stan
* Fix Rewrite MAC to Hex padding with floats
* fix sqlite migration
* Fix warnings up to Arbos
* fixes a-c
* a-r
* a-vrp
* There and back again
* Update test data, couple fixes
* PHPSStan fixes
* style fixes, and fix Asyncos, whoops
* flip serial back.......
* less bogus data
* Poweralert sysName during polling too
* make sure things are calculated in the correct order
* fix style and bad nullables
* update test data
* A comple more conversions
* cambium ptp, misc, and hardware_mib
* remaining except vmware-esxi
* Fixes
* Update baseline
* fixes and fix up baseline
* adjust SnmpQueryMock to upstream options change
* data corrections
* restore slashes
* correctly handle all options input in SnmpQueryMock
* undo ftos changes
* restore vccodec sysDescr
* Rewrite netstats polling
As modern module
Don't use snmpgetnext as it can result in extra data returned
* remove copyrights on interfaces
* typehints
* fix silly backslashes
* Rewrite ISIS Adjacency discovery/polling
hopefully much faster now, do most work in discovery and just check up/down in poller.
* unused variable
* Implement option for OS override
* fix an incorrect typehint
* test data
* work around stupid migration name
* update schema
* better handling for the on-demand discovery
* more detailed phpdoc
* fix when adjacency is not found
* don't clear out data when adjacency goes away
* Adjust nullable fields
* fixes
* fix class name
* correct migration
* fix bug causing adjacency data to always be blank
* port popups for port links
* isisISAdjState does not need to be nullable
* remove extra space
* default off
* If port is missing return $text
* update schema
* Cleanup old components
* correc copy paste error
* Definition of a new SLA module to migrate from old cisco-sla and support other devices : Juniper RPM and Huawei
* Change wrong description name of module SLA
* Re implementing Juniper RPM support in a new module Slas (Cisco SLA to be added)
* Added Graphs for Juniper RPM types
* Tried to make discover and poller generic : to handle Cisco SLA and Juniper RPM and others
* Reimplementing Cisco SLA in the new Sla module and adding condition to manage both SLA and RPM
* Definition of a new SLA module to migrate from old cisco-sla and support other devices : Juniper RPM and Huawei
* Change wrong description name of module SLA
* Re implementing Juniper RPM support in a new module Slas (Cisco SLA to be added)
* Added Graphs for Juniper RPM types
* Tried to make discover and poller generic : to handle Cisco SLA and Juniper RPM and others
* Reimplementing Cisco SLA in the new Sla module and adding condition to manage both SLA and RPM
* Fix some error due to Elequent object replacing SQL request
* Fixing indentation
* Fixed continuous integrations errors
* Fixed continuous integrations errors part 2
* Fixed continuous integrations errors part 3 : missing last new lines
* Fixed PHP Static Analysis checks
* Fixed continuous integrations errors part 4
* Fixed PHP Static Analysis checks part 2
* Trying to convert existing cisco-sla to new slas one
* Trying to add slas to fix test failure (I am pretty sure this is not enough but I don't know how to do it)
* Switching old cisco-sla module declaration to new slas module in concerned OS files
* Fixing wrong sla module name instead of slas in concerned OS files
* Fixing wrong module name sla changed to slas (as is it in power-supplies reimplementation)
* Fixing some warnings shown in the Inspection CI but skipping some that are already present
* Adding tests files from virtual Juniper VMX and adding slas modules in /tests/module_tables
* Adding missing SNMP data files
* Module Slas modifications to use inheritance
* Fix CI errors
* Fix CI errors part 2
* Fix CI errors part 3
* Fixing no value on RTT graphs
* Fixing only last SLA to be polled : problem with loops
* Fix CI errors part 4
* Optimizing a little the Juniper RPM poller part
I wanted to query only the required values but it is complicated to query a specific OID
as Cisco-SLA does because the owner and tag are hardcoded in ASCII decimal with strange values.
So I use the function snmp_walk which gets the whole OID values in text.
And I index the Juniper MIB (because we want multiple values). But I changed the DISMAN MIB
requests to get only what we want.
* Fix CI errors
* Fix CI errors part 2
* Fix CI errors part 3
* Fixing PHP Static Analysis error 2/4
* Fix CI errors
* Implementing Interfaces to fix some errors that occurs with inheritance
* Adding missing Interfaces files
* Moving generic Sla discovery code into Junos Class
* Fix CI errors
* Fix CI errors part 2
* Fixing missing definition of SlaDiscovery in Cisco shared Class
* Fixing missing import for Illuminate\Database\Eloquent\Collection
* Fix CI errors part 3
* Fix PHP Static Analysis error
* change type strings to use translations instead of config
* IOSXR test data
* remove test data garbage
* simplify discovery
* Fix style
* Updating test files to adapt mock sla_nr ID starting from 0 and not 1 : CI tests should pass
* clean up polling
add rtt field in the db
cisco icmpjitter seems to have confused a lot of values
* rtt on discovery
* use crc32 for consistent sla_nr values
* revert snmprec
* Fix style
* correct schema
Co-authored-by: Tony Murray <murraytony@gmail.com>
* Cisco enhanced cellular support
* Extra sensors, camelcasing and bugfixes
* Doc update
* German translation
* French translation
* Style fixes
* Style changes
* Style changes
* Style changes
* Style changes
* Style changes
* Added test data
* New test data --variant
* New test data --variant ir1101
* Made the new wireless sensors generic
* Added test data for ios variant ir809
* Fix includes/discovery/sensors/count/cisco.inc.php, thanks PipoCanaja
* Moved cellular operating band from Wireless sensors to count sensor
* test data
* test data
* test data
* test data
* Moved ICCID/IMSI/IMEI to inventory
* test data and style fix
* Cellular state sensors now have a group
Co-authored-by: Maikel de Boer <mdb@tampnet.com>
* mempools to modern module
quick hacky hrstorage port
* port ucd-snmp-mib to Mempools
* Populate DB for ucd
Prep for yaml
* initial yaml attempt
* more complex conversions
fixes to YamlDiscovery, make leading $ optional and allow mib::oid format
* walk full tables and skip values
normalize percentages above 100
* handle precent only ones (specify total as 100)
* Move default polling out of YamlMempoolsDiscovery
* fixes
* Update test data hrstorage should be correct.
* perc_warn for hrstorage
* Host Resources, record buffer, cached, and shared
* Host Resources is always better, don't do both HR and UCD
* fix unix, include warning levels
* variable size
* consolidate skip_values
* define mempools schema
* number instead of integer
* more schema refactor
* one more skip_values reference
* throw error for invalid oid translation
aos6
* a* and Cisco
* updated test data
* update almost all hrstorage data files
* b*
* c* with test data
use standard cache for hrStorage
* use cache for storage module too
* hand bsnmp properly
* bdcom
* exclude total oid from yaml so it is not polled
May add a way to ignore this behavior and poll it, but I don't know if that is needed.
* automatically handle percent only values
* ciscowlc
* only poll used or free if we have used, free, and total.
* fix skipping
* the dlinkoning
fix find value when value "name" is numeric
* support numeric oids
* dnos/ftos attempt
* I guess we can't filter on total > 0
* edgecos
* e*
* f WIP
* f*
* gwd (aka g*)
* h* + procurve
* i*
* j*
* m*
* support 0% used memory (however unlikely)
* n*
* CISCO-PROCESS-MIB memory, share cache with processors module
* ignore mempools with invalid total
* p*
* quanta
* r*
fix raisecom mibs terribly broken
* s-z
* style fixes
* Move VRP back to PHP and make it actually work
* fix zynos
* update schema
* Update Cisco processor data for description bug fixes
* fix comware processors
* comware mempools with memory size
default precision to 1
* sophos-xg updated data
* hrstorage use ram size for buffers, cache, and shared
* Show memory available instead of free in device overview
* UCD, use same rrd format, store available instead of free in the db.
* Calculate availability for HOST-RESOURCES-MIB
* Convert UCD to standard polling
* rename old rrd files
* initial graph work
* graph WIP
* Graph looking decent
* Graph looking decent for hr
* remove old ucd_graph code
* handle availability mempool
more graph cleanup
* color adjustments
* remove accidental free calculation
* Update test data and fix corner cases
* fis pfsense
* update schema
* add default value for mempool_class
* fix whitespace
* update schema
* update schema correctly
* one more time
* fortigate_1500d-sensors missing oids
* Update docs.
* fix indent
* add implements MempoolsDiscovery explicitly to OS
* remove ucd_memory graph references
remove unused device_memory graph
* remove unused functions
* set devices with mempools to rediscover to prevent/minimize gaps
* use a subquery
* add overview graph
* port health mempools table
* Update device mempool
* only show overview if multiple
* Don't override user set warn percentages in discovery
* fix missed usage
* fix style
* Safety check to not rename rrd files incorrectly if migration has not been run.
* Fix overview percent bar and represent available and used on the bar
* missed an item to convert to mempool_class
* percent on the wrong side
* Implement OS specific information discovery
That way it doesn't have to be fetched during polling
Also improve discovery process, os is only detected once, in the core module.
EXA is the test os, a couple improvements there.
* Use local variable, then unset it so we don't pollute.
* fix style issues
* test and other fixes
* attribute update fixes
* Update exa data, need new source data
* null missing "os" values
* fix ftos odd character
* fix ftos odd character
* only null for new style or we will reset to null every discovery
* Move device observer to own class
* Handle location, relocate event logging
* update exa e7-2 data
* update ird test data, apparently unicode is now working.
* update Linux ntc, now uses correct icon
* Only load all os on the web, also, we can't load existing the the database isn't connected.
* only for devices that have a location
* revert ftos test data apparently
* revert ird
* update nokia mibs
* database migrations
* add code
* html code
* update db schema
* add test data
* add FIXME
* move mibs/nokia/MPLS-TE-MIB to mibs/MPLS-TE-MIB
* initial database migrations
* first part, discovery
* second part, polling
* add SAP polling and discovery
* style checks
* rename variables in more generic way
* html global pages for sdp and sdp binds
* add Services and SAPs
* port links, database, etc.
* html device routing pages
* add tests
* checks
* rework database id relationship
* scruntinizer inspection
* fix unit test for new mpls tables
* WIP - Add MPLS Support
This introduce the generic MPLS support
- New database tables for MPLS LSPs
- actually discovery and polling on NOKIA SR OS (Timetra) devices
- new routing->MPLS HTML pages
- ToDo MPLS LSP paths table and views
Suggestions and improvements are welcome
* add db schema
* some fixes
* add path table, discovery and polling
* add path views
* add test data
* Convert MPLS module to new style
Implement a SyncsModels trait to simplify code a lot
* abs() for negative value from snmp (bug?), test data
* fix db schema
* Fix up test data, remove uneeded data in json
* fix whitespace
* Update to Added support for HeliOS 10Ghz failover to 5Ghz state sensor
Converted /includes/discovery/sensors/state/helios.inc.php to yaml
Test units included
CLA has been signed
* Added support for CeraOS TX Mute Status state sensor, NTP Client Lock Status state sensor.
Updated CeraOS temperature sensor, now called from includes/definitions/discovery/ceraos.yaml - removed includes/discovery/sensors/temperature/ceraos.inc.php
Corrected issue with CeraOS temperature reverting to zero after polling (added a trailing . to the num_oid)
Amended includes/definitions/discovery/helios.yaml with changes as advised by Neil Lathwood and Tony Murray
* Added unit test data and corrected ceraos.yaml validation error
* Added support for Ceraos Wireless Sensors (php)
Cross Polar Interference
Wireless Frequency
Added Ceraos state sensors (yaml)
NTP Client Lock Status
Tx Mute Status
Radio Operational Status
Remote Radio Operational Status
IDU Temperature
Power Amplifier Temperature
* Fix up tests, etc
* remove helios changes, fix style
* Extract DiscoveryItem and move some things to better places.
Extract model class
Fix up model construction. I have problem with construction...
Makeshift model working. Switch constructor to factory. discover() and create()
Support legacy discovery.
Remove uneeded custom pollers
Remove netonix custom detection as we try ucd on all os now.
Add a few yaml procs. Fix a couple things.
More processor discovery conversions
Move Calix e7 to standard hrProcessorLoad, but it doesn't fully implement the HR-MIB, move things around to make it work.
Add a few yaml procs. Fix a couple things. Correct some stupid mib stuff.
Move more, drop php 5.3
Add netscaler which uses string indexes. Port fiberhome to yaml and use skip_values
More conversions. BroadcomProcessorUsage Trait
Serveriron and Ironware share some mibs. Create a common abstract os for them.
Add yaml support for mib specification in each data entry
Make legacy discover_processor() set 0 for hrDeviceIndex
Untangle Dell switch OS processors
Use use shared OS for groups if they don't have a specific group.
fix silly mib mistake
Make index optional
Move HR and UCD to Traits and out of Processor.
* forgot to update the fortiswitch index
* Make sgos and avaya-ers match the old index.
* fix comware test data
* fix merge errors
* fix dsm and remove pointless empty modules
* file not found exception is in the wrong place.
* Updated processor development docs
* Inital cambium refactor
* Refactored tests
* Remove CMM from pmp group
* Add sensors / Give CMM individual OS
* Fix linting
* More Sensors / states and Revised Headers
* Added old graphs / more sensors
* Add modulation rate to sensor
* Fix Hardware detection bug
* Further hardware detection refinments
* Modify pmp hardware detection
* New Wireless Metric - SSR
* SSR Sensor Graph
* Migrate SSR to metric
* Added last metric file
* Add master check to isAp method
* Fix variables in epmp
* CMM Discovery and state addition
* Add another test for cmm
* newdevice: Add connected AP count for Cisco WLCs
Adds ap-count wireless sensor type
fixes: #4295
* better detection
Update the overview graph to the new one
* feature: Wireless Sensors
Includes client counts for ios and unifi
Graphing could use some improvement.
Alerting and threshold ui not implemented
WIP: starting OO based wireless sensors.
Class based functionality working
remove old functional files
add schema file
discovery needs to be enabled, not polling
fix up schema
fix Unifi discovery not returning an array
Add some debug when discovering a sensor.
Fix style.
Add missing semicolin
Add a null object (Generic) for OS.
Fill out some phpdocs
Re-organized code
Each sensor type now has it's own discovery and polling interface
Custom polling tested with Unifi CCQ
Left to do:
Implement UI (Graphs and Custom thresholds)
Alerting
Testing
Fix event message text
Remove runDiscovery and runPolling from OS, they are unused and don't belong there.
Cleanups/docs
Missed this file.
Remove the requirement to fetch the current value to check validity.
Do that automatically if current is not specified
A few cleanups here and there
First pass at graphing.
device_ and wireless_ graphs added.
Add RouterOS support
Singleton OS instance isn't required right now.
Remove that to allow some memory to be freed.
Add wireless to the device list metrics.
Make all metrics clickable
Tweak graphs a bit
Implement limit configuration page.
Use sensors page as common code instead of duplicating.
Clean up some javascript interactions: Allow enter on values to save. Cancel if update is not needed. Enable the clear custom button after setting a custom value.
Add some wireless alert rules to the library.
Add documentation.
Add unifi client counts by ssid in addition to radio.
Optimize Sensor polling a bit.
Add HP MSM clients support (for full controller)
Fix function accessibility
Formalize the discovery and poller interfaces.
Add Xirrus clients and noise floor
move module interfaces to a more appropriate place.
push caching code up to os, unsure about this do to the limitations
No point in selectively enabling wireless discovery. We only discover if the device supports something.
Add RSSI, Power, and Rate.
Add these sensors for Ubnt Airos.
Clean up some copyrights.
Reduce the amount of files need to add new types.
Leave graph files for consistency and to allow customization.
Remove the old wifi clients graph completely.
ciscowlc should have improved counts (total and per-ssid)
Schema didn't get added.
Impelement the rest of the AirOS sensors
Reformat and re-organize the Airos.php class.
Add several UBNT AirFiber sensors
A few fixes add links to the section headers
Add HP MSM mibs.
* Schema file got dropped in rebase.
* Add wireless menu to view sensors across all devices.
Icons in the menu need help :/
* Add HeliOS, Mimosa, and Siklu support
Sensors added SNR + Noise
* Add power and utilization to Unifi
* Update polling to prefetch all sensor data in a few snmp requests as possible
* Add Extendair: tx+rx power, aggregate rate, frequency
* Add a check for duplicate sensors in discovery. Just print an error for now.
* Add Bit Error Ratio (named error-ratio to allow for bit error rate to be added if needed)
Fix an incorrect link in the wireless sensors table
* Add error rate and change all bps and Hz to use si units
* Fixes to limits and frequency display
* Fix overview graph frequency display
A few decimal place tweaks
* Don't allow switching sensor and wireless-sensor graphs, it doesn't work.
Change individual distance graphs to use si units
* Go through the OS and make sure I got all the sensors I can (probably missed some still)
Because pollWirelessChannelAsFrequency() is generic and a little complex, so pull it up to OS.
Message to help developers adding supports that don't return an array from discover functions.
* Fix some issues
* Remove noise and signal for now at least
A couple more fixes
Add a notification
* Oopsie
* Bonus AirFiber sensors
