* Fix missing PoE port graphs for Cisco Catalyst 9K
* Reworked code: 2 assignments, added tests
* Simplify code
Checking the MIBs...
CISCO-POWER-ETHERNET-EXT-MIB: AUGMENTS { pethPsePortEntry }
POWER-ETHERNET-MIB: INDEX { pethPsePortGroupIndex , pethPsePortIndex }
This means cpeExtPsePortEntry is always indexed by exactly 2 values. No point in populating slot.subslot.port
Co-authored-by: Tony Murray <[email protected]>
* Added discovery and graphing for JunOS (SRX) RPM probes
* Proposed changes for a percent based sensor type
* Fixed missing MIB declaration in JunOS YAML discovery file
* Updated Health-information.md to reflect the new percentage value type
* Added separate test data for junos_rpm type
* Update sensors.php
* Update sensors.php
* Update functions.inc.php
* test re-run
* Update junos_rpm.json
* percentage -> loss
* add ifSpeed prev test data
* mis-merge
* update sensors
* and bgp...
Co-authored-by: PipoCanaja <[email protected]>
Co-authored-by: Tony Murray <[email protected]>
* Update functions.inc.php
Skip changing the high limit threshold to low limit threshold value when high limit threshold doesn't exist for a sensor. If low limit threshold value was set by discovery process or manually, the same value would be also set for high limit threshold.
* Update cisco-entity-sensor.inc.php
Skip invalid sensor threshold values, which some Cisco ASR devices (probably other families too) return.
* Add snmprec data for Cisco ASR9010
* Create iosxr_asr9010.josr
* Create iosxr_asr9010.json
* Delete iosxr_asr9010.josr
* Update iosxr_asr9010.json
* Update iosxr_asr9010.json
Co-authored-by: Tony Murray <[email protected]>
Co-authored-by: PipoCanaja <[email protected]>
* 3g-LTE WAN stats
* Get HW name on AR16x family
* serial for AR
tests
* enable snmpsim log
* Update bootstrap.php
Co-authored-by: Tony Murray <[email protected]>
* Detection for MobileIron appliances
* Test data
* Remove references for GANDI-MIB
Turns out these aren't actually needed for Linux-likes
* Remove module filters
* vrp-improve
* add bgp4 data, and get errors
* Fix WRONG Type error on bgpPeerRemoteAs + handle ErrorSubCode in a generic way
* fixing tests
* clean
* improve state backup to BGP4-MIB
* tests with corrected data
* tests
* restore original tests/data/vrp_5720.json
* Handle cases where the data type is hex encoded, but the data is
not actually hex encoded.
* Test data claims 4x, but is not hex encoded
* Encode the private string
* Replace 4x|<private> with 3C707269766174653E
* Re-run save test data.
Seems some of these files might have been hand edited at some point
as fields seem out of order
* Have a trap test use a mock instead of a db query
* Extend processor polling to Dell Powerconnect N1100 and N1500 series
* SNMP test data for Dell Powerconnect N1124T-ON
* SNMP test data for Dell Powerconnect N1148T-ON
* SNMP test data for Dell Powerconnect N1524P
* Update Airos.php to match with Airos 8.x.x
Oid changed from AirMaxQuality (not used anymore), to Airtime
* Update Airos.php
* update airos.php to use wirelessUtilization
Using OID for UBNT-AirMMAX-MIB::ubntAirMaxAirtime.1 for wireless sensor utilization.
* Removed Airtime from quality
* Tests
* Update airos.json
* airos.snmprec reverted to previous state, and uploaded airos_airos8.snmprec
* Added airos8 snmprec
* Create airos_airos8.json
* Update airos.json
Co-authored-by: Tony Murray <[email protected]>
* Implement OS specific information discovery
That way it doesn't have to be fetched during polling
Also improve discovery process, os is only detected once, in the core module.
EXA is the test os, a couple improvements there.
* Use local variable, then unset it so we don't pollute.
* fix style issues
* test and other fixes
* attribute update fixes
* Update exa data, need new source data
* null missing "os" values
* fix ftos odd character
* fix ftos odd character
* only null for new style or we will reset to null every discovery
* Move device observer to own class
* Handle location, relocate event logging
* update exa e7-2 data
* update ird test data, apparently unicode is now working.
* update Linux ntc, now uses correct icon
* Only load all os on the web, also, we can't load existing the the database isn't connected.
* only for devices that have a location
* revert ftos test data apparently
* revert ird
* New OS: QTECH
https://www.qtech.ru/en/catalog/
* QTECH: Add hardware, version and serial support
* QTECH: Fix platform and software version detection
* QTECH: Add test for QSW-3450
Fixes issues observed in LibreNMS (timeouts, missing data)
Manual snmpwalk vs. snmpbulkwalk confirmed no bulk support
Missing toner, network, etc. information now seen in LibreNMS!
* MPLS updates and bugfixing
* Tests
* tests
* code climate, tests
* tests
* tests
* remove nokiaIfName(), fetch ifName from the database instead
* restore from messed rebase
* tests
* btw, fix travis about the missing docs
* tests
* tests
* clean the messed up test data an generate new for timos
* rebase
* SIAE add additional sensors and data
Improved labels
Modulation
Rate
Serial Number
Hardware name
* Add total rates
* was supposed to be divisor
* Short array syntax
* Support FreeNAS/TrueNAS 11.3
Seems the latest release changes the SysObjectID from FreeBSD to
their own enterprise number.
I've left the old FreeBSD enterprise number in place, so both
older and newer releases will be detected.
* Test data
It's also possible to do zpool IO from the MIB, but diskIO on
LibreNMS makes a lot of assumptions about it coming from the UCD
MIB.
This changeset adds detection for FreeNAS and TrueNAS - despite
having their own enterprise number, the snmpd uses the FreeBSD
one.
The naming is a bit all over the place, because this reflects
reality - IXSystems produce FreeNAS and TrueNAS, the product lines
have merged to eliminate FreeNAS, but TrueNAS still calls itself
FreeNAS everywhere except the GUI.
* opengear MemPools
Discovery and Polling of opengear mempools - opengear Detail Memory Usage is already collected however that can not be used to trigger rules.
* add test
opengear mempools tests
* remove newline
* Added sensors for outlets on Schleifenbauer devices. Also use the outlet name when configured.
* Updated tests for Schleifenbauer
* Fixed on test for Schleifenbauer
* Optimized polling by retriving only outlets from the device with the network connection, not all devices on the data-bus.
* Fixed code styling
* Use shorthand comparisons for names
* Fix for conflicting $entPhysicalIndex
* Add OS detection for Greenbone appliances
They don't expose anything fancy over SNMP, but this makes them
display interface names correctly. Under the hood they're unix-y.
Greenbone logo is from the AGPLv3 gsa, which is GPL compatible:
https://github.com/greenbone/gsa/blob/master/gsa/public/img/greenbone.svg
The mib is included for completeness, but it doesn't expose any
graphable values.
* Fix the vendor's logo
* BGP Polling: Add error code polling
* Rework describe_bgp_error_code and fix bgp error fields migration
* Add real test data for IOS-XR and Arista EOS
SourceDoctor
Tony MurrayandGitHub
PipoCanajaandGitHub
O PalivanandGitHub
mattosemandGitHub
Adam BishopandGitHub
Dan BakerandGitHub
joseUPVandGitHub
KingJandGitHub
Alexander MoisseevandGitHub
Jozef RebjakandGitHub
arrmoandGitHub
Damon ReedandGitHub
Vitali KariandGitHub
gonzocrazyandGitHub
Jurrian van IerselandGitHub
Mathieu PoussinandGitHub
