* AuthSSOTest: clear roles cache
* PollingJob: When a poller module doesn't exist, return null instead of false. Skip all other checks and disable polling in that case.
* Sensors: Guess high and low limits separately as needed
* Sensors: drac test psu current data was wrong, referencing the snmprec, 8 / 10 and 0 / 10 should be the values
NOTE: drac is messed up and runs a billion snmp queriess for no reason
* please phpstan
* Sensors: limits reference old code
move to "creating"
* Fix gw-eydfa accidental assignment
* Fix ies5000 test data now that the bad state is removed
* Fix ies5000 test data part 2
* Move sensor discovery reset into discover_device()
* infinera remove duplicate sensor (also a lot of trailing whitespace apparently)
* Fix innovaphone bad yaml discovery
* module tests should be using null when test data doesn't exist, not an empty array
* When discovery or polling is not supported, dump null instead of an array.
Account for nulls in testing
* update ISE serial
* Janitza was seemingly wrong before
* Remove some private data
* bgp-peers requires ipv4-addresses and ipv6-addresses for bgpPeerIface
* fix polycomLens broken state sensor discovery
* Raritan pdu and pdu2 test data was combined in one test file, split it out
* scs-ks duplicate temperature sensor indexes
* sentry3 someone tried to avoid breaking stuff but just broke things more
* smartos-dcp-m fix incorrect numeric oids
* ssu2000 apparently test data was wrong, must have fixed a bug in the code.
* timos remove duplicate dbm sensor definitions
* bgpPeerIface is working in tests now
* Fix moxa-etherdevice when mibs are a bit different
* xw_to_dbm negative values should return null
* Update cisco test data due previous fixes/changes
* One more bgpPeerIface
* Add orderBy to ospf module db dumps
* Remove links test data for now
* Improve handling of bad data in ipv6-addresses module
* Improved module controls
Ability to clear device module overrides from webui
Ability to clear all database data for a module (helpful for module you have disabled that still have data)
Database reset only works for modern modules.
* Update functions.php
* Refactor poller to allow modules to run even if the device is down
Include core in config (but not webui) to avoid silly shenanigans
Inject datastore into polling
* Needed to split datastore interface
* Cleanup some data_udpate() references
* Apply fixes from StyleCI
* Fix legacy poller :D
* Output to the correct stream
* Fix lint issues
* Apply fixes from StyleCI
* Fix discovery not including core and submodule handling
* Use whereRaw
---------
Co-authored-by: StyleCI Bot <bot@styleci.io>
* Improved Modern Modules
Modules now report module dependencies and can dump data for testing
This should serve to the process of building a module more obvious.
cleanup now only requires a device, not an os wrapped around a device
Helper to create a modern module (including the legacy adapter) from a name.
* return false correctly for dump and handle it.
* make sure test data is in the right format.
* wrong isis table name
* sort
* Fix style and lint issues
* core WIP
* try to finish up
* trim space too
and a couple of cleanups
* update test data
* put escapes back
* another net-snmp difference
* correct copy paste error
* WIP
* Use new code YAY
* a tiny bit more
* Kind of working
* Handle manual modules correctly
* convert core to modern module
* Only save metrics if modules is not overridden
* correct module exists check
* database error handling
* debug handling
* restore bad changes
* Introduce Actions
RunAlertRulesAction
UpdateDeviceGroupsAction
* tweaks to output
* Fix some issues in outside code
* Style fixes
* fixes to module status checks
* typehints!
* Use logger only and DI
* OS module not named correctly
* Work on quiet output a bit more
* generically don't change output when disabling debug if the driver is already stack
* Fix missing $device variable for legacy os polling
Fix missing dbFacile functions when no legacy modules polled in RunAlertRulesAction
* restore legacy os module shim
* use the new poller code for tests
* PollingDevice event
* Fix some issues and enable/disable error reporting around legacy modules
* typehints
* fully update baseline
* Use Process for version commands so we don't leak debug output.
* don't detect rrdtool version in ci every time
* style fixes
* Warning fixes
* more fixes
* re-update baseline
* remove diff noise
* fix up alerts
* Catch exceptions in device ip lookup
* Revert accidental snmp.inc.php poller target change
(should have been ?: not ??)
* core WIP
* try to finish up
* trim space too
and a couple of cleanups
* update test data
* put escapes back
* another net-snmp difference
* correct copy paste error
* WIP
* Use new code YAY
* a tiny bit more
* Kind of working
* Handle manual modules correctly
* convert core to modern module
* Only save metrics if modules is not overridden
* correct module exists check
* database error handling
* debug handling
* restore bad changes
* Introduce Actions
RunAlertRulesAction
UpdateDeviceGroupsAction
* tweaks to output
* Fix some issues in outside code
* Style fixes
* fixes to module status checks
* typehints!
* Use logger only and DI
* OS module not named correctly
* Work on quiet output a bit more
* generically don't change output when disabling debug if the driver is already stack
* Fix missing $device variable for legacy os polling
Fix missing dbFacile functions when no legacy modules polled in RunAlertRulesAction
* restore legacy os module shim
* use the new poller code for tests
* PollingDevice event
* Fix some issues and enable/disable error reporting around legacy modules
* typehints
* fully update baseline
* Use Process for version commands so we don't leak debug output.
* don't detect rrdtool version in ci every time
* style fixes
* Warning fixes
* more fixes
* re-update baseline
* remove diff noise
* fix up alerts
