* Dynamic entPhysicalIndex values for YamlDiscovery
* Use degree symbol when displaying temperature values
* Adjust SNMP options for new snmp_get_multi()
The OS polling module for mrv-od was using snmpget commands with
-Ovqs, rather than -OQUs, which meant that the equal sign was
stripped in the snmpget output. But that equal sign is now used
as the explode() delimiter so it broke the construction of the
returned array for the snmp_get_multi() function.
Additionally, I removed the NBS-CMMC-MIB:: prefix which is no
longer returned by snmp_get_multi() as part of the OID. Now,
the mrv-od.inc.php OS polling module is retrieving data from
positions in the array with actual content.
* Convert mrv-od to yaml, improve sensors discovery
Converted sensors discovery for mrv-od to yaml, retaining all
functionality for pre-cache, dbm, and temperature. Replaced specific
SFF-8472 Digital Diagnostics state sensors with generic ones, given that
we are now reading out detailed values through new dbm, current, voltage
sensors.
Reasoning: the generic Digital Diagnostics state sensors report state
diagsOk, or else the worst severity level measured among all of the
Digital Diagnostics values for that optical data point. You'd really
only want to set a generic "alarm" so the box can report that it
thinks something is wrong, whereafter a human can look at the graphs
and/or the CLI to draw their conclusions about the alarm. Otherwise,
things would quickly become too spammy as you are essentially duplicating
every sensor across both regular measurements and state measurements.
Further changes:
- Increase maximum number of detected PSUs from 4 to 8 per the MIB.
- State sensor to detect (in)sufficient power budget for all modules.
- Use skip_values to hide state sensors with the notSupported value.
- Use skip_values to hide sensors which are unsupported per the MIB,
signified by the device returning special values -1 or -2147483648.
- Add dBm, temperature "over" graphs to the mrv-od device header bar.
* Add mrv-od entity-physical support
MRV does not use the ENTITY-MIB data format, so we had to reconstruct
the inventory from their proprietary format using the following tables
from their NBS-CMMC-MIB:
- nbsCmmcChassisTable
- nbsCmmcSlotTable
- nbsCmmcPortTable
Additionally, since sensors didn't have their own ifindex in the
NBS-CMMC-MIB, I went ahead and appended the last OID digit to
the "containing" ifindex create a unique number. The same was
done for the sensors in the yaml-discovery.
* Test data for mrv-od, fix 2* pre-commit.php issues
* Fix entPhysicalIndex returning 0 instead of null
Some unit test breakage was caused by 62167ebcb which changed
the code to return 0 instead of null when {{ $index }} was
set as the entPhysicalIndex in the YamlDiscovery. So now we
detect if it returns some value which may be interpreted as
false, and if so we set null rather than 0.
* Fix for RouterOS LLDP discovery
Only the first nine neighbors were correct on RouterOS - missing hexdec() led to the remaining neighbors being linked to the wrong ports. Ex. port 10 in hex was incorrectly linked to port 10 decimal when it should be 16 in decimal
* Added test data for MikroTik RouterOS CRS317 switch
* fix client count polling, add ap count polling.
* Set low warning/critical thresholds for AP count sensors
* Add Aruba AP Count Warning and Critical Alerts to collection, lint alert_rules.json
* add newline at end of alert_rules.json
* add/update tests/data/arubaos*.json test data
* Fix Cisco MAC acounting discovery, polling and HTML templates.
* Remove empty code.
* Provide test data for cisco-mac-accounting module.
* Added module test dependency.
* Collect Appliance serial number from Sophos device
Add serial number read. Added on polling session instead of discovery because the S/N changes in case HA functionality is enabled, and there is a switch between active and standby.
* Update cyberoam-utm.inc.php
* Fix Siklu Version/Serial
Siklu allows for two software images. We must first determine which SW bank is "running" in order to report the correct version.
Also adding correct Serial Number detection for Siklu devices.
* Update siklu.inc.php
* Update siklu.snmprec
* Create siklu.json
* New OS: Aruba Instant
* New OS: Aruba Instant
* recreate test data
* remove aruba_instant test data
* remove empty file includes/definitions/discovery/aruba-instant.yaml
* fix state sensor discovery
* remove minor changes to includes/polling/functions.inc.phpwq
* move mac helper functions to Rewrite class
* simplify snmpwalk_group usage, general code cleanup
* fixes
* fixes
* fixes
* fixes
* fixes
* fixes
* recreate test data for 105 variant
* Add Client sensors for 8.4.0.0+
* begin stream-lining discovery and polling. separating discovery functions
* update test data
* update test data
* update test data
* improve mempool discovery/polling, clean up os polling, improve state discovery, improve os definition, misc fixes to wireless sensors module
* attempt to implement custom AP and client discovery and polling
* code fixes
* re-add ap count top graph
* more fixes
* more fixes
* more fixes
* more fixes
* remove some debugging, update test data
* code cleanup
* code cleanup
* address some scrutinizer warnings
* Fix Avtech discovery
pre-cache stored the data incorrectly
* Fix RA-4E external sensors
sen1 had incorrect oids (duplicate of sen2)
Description oid from data doesn't match the mib, perhaps outdated MIB?
* add test data
* Updated 4E MIB
* additional sensors for timos
change to yaml discovery for sensors
remove obsolete tmnxChassisPowerSupplyTable
* inconsistent data in snmpsim
* fix snmpsim data
* fix snmpsim data
* fix snmpsim data
* Added support for Zmtel greenpacket devices (os: zmtel)
* added more sensors
* move count sensors to features
* rename MIB and move modulation scheme to state sensor
* added test data
* graph pCID
Fixes#9718
This PR adds POE graphs, even if not all the values that are polled on other OSes are available on this one.
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [X] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 10075`
After you are done testing, you can remove the changes with `./scripts/github-remove`. If there are schema changes, you can ask on discord how to revert.
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [X] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
After you are done testing, you can remove the changes with `./scripts/github-remove`. If there are schema changes, you can ask on discord how to revert.
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [X] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
After you are done testing, you can remove the changes with `./scripts/github-remove`. If there are schema changes, you can ask on discord how to revert.
* Added support for HikVision-DS Cameras
clean up
removed pointless file, cleaned up code
fixed failing unit tests, a bit of cleanup
WIP - will rebase
split hikvision into hikvision-nvr an hikvision-cam
* removed unneeded comment and rec file
* ovaldi UPS support
* ovaldi UPS tests
* serial + model + version inc tests
* update of the code using details from requester
* update of the code using details from requester
* update of the tests
* forgot discovery yaml ...
* Added support for Ruijie Networks
* Extend discovery
Let's extend to all the products from this brand, at least until we have more detailed discovery
* New Device: ATS - Automatic Transfer Switch
* Small fixes
* Fixed test data
* More fixes, again
* Moved temp to php to retrieve limits from device
* Fixed perms again...
* Final test file. Or I hope so...
* device: Added support for APC AP9810 zone contacts
* fix: disconnected sensors been detected. And iemConfigProbesTable certainly does get used and it reference
* fix: load is VA, not to be confused with watts. This could be different per device though...
Apparent Power unit = VA
Real Power unit = Watts
And Keeping codeclimate happy
* feature: updated APC MIB
* feature: added test data for APC Smart UPS SMX750i and AP9810 with contact switches
Marlinc
Martijn Schmidt
Arnoud Vermeer
jozefrebjak
Michael Ducharme
Spencer Butler
kmpanilla
Timothy Willey
Jozef Pivarník
corsoblaster
PipoCanaja
Vitali Kari
Marvin Kuurstra
CirnoT
Tony Murray
JoshWeepie
pobradovic08
Neil Lathwood
tomarch
djamp42
TheGreatDoc
KodApa85