* Improved Latency graph
Store loss+jitter info in rrd instead of database
New graph icmp_perf (legacy ping_perf still valid referencing part of the newer data)
Delete device_perf table
* Change loss to an area so it is more visible
* Style fixes
* Cleanups from phpstan & tests
* exit_code fix
* Remove alert usage of device_perf
* Don't use magic __get
* Add test for bulkPing
Add host to previous tests
* style fixes
* Fix issue fping error responses
* Ignore everyting inside () during GEO lookup
I location info is: "1100 Congress Ave, Austin, TX 78701 (3rd floor meeting room)" then the GEO locator will look up "1100 Congress Ave, Austin, TX 78701"
* update info
* small typo
* typo fix
* getting verify
* style fix
* commitment issues
* updating wiki
* tweaking the document format
* more tweaks
* Im starting to hate md
* cleanup
* use component to discover if xDSL polling is needed
use component to discover if xDSL polling is needed
* Components OK, Polling in correct files, no DB for VDSL
* GUI
GUI_suite
* per port as well
* rename
* interface listing
* draytek_snmpsim
* fix arraymerge
fix names and max value
* schema
schema
style
* remove one dbFetchRows
remove 2x dbFetchCell
style
style
remove Legacy dbFetchRow
tests
tests
eloquent
more eloquent
more eloquent
one more gone
* fix properties access
eloquent_insert_update
style
tests
tests
tests
tests
* tests
tests
tests
* adslLineCoding
* Models
* fix not nullable cols in DB from code
default values
typo
rename
typo
schema
fix
fix
vdsl fix now
typo
typo
fix size
fix size
* Power values for VDSL
Power values for VDSL
Power values for VDSL
DB
* cleanup
* Rrd::checkRrdExists
* always enable DSL discovery
style
* xdsl module
* cleanup and move to Module
cleanup and move to Module
cleanup and move to Module
cleanup and move to Module
* Fix display
* fix polling and tenth
* remove legacy poller
* Style and Cosmetics
Cosmetics
Cleanup
* Translations
Translations
* exists
exists
* add test support for xdsl
* remove last component call
unused
* translations
* remove non standard onclick event on xdsl line
* Update Discovery Support.md
Update Poller Support.md
toner_gone
* Notification for removal of lnms config:set enable_ports_adsl true
* enable on devices with potential DSL interfaces
* tests are working now
fix teldat tests
* os_schema
* teldat
* move to new module structure
* move to new module structure
* wrong dump function
* wrong dump function
* laravel_through_key hidden
* Update notifications.rss
* Update notifications.rss
Co-authored-by: Tony Murray <murraytony@gmail.com>
* Update configuration docs to use lnms config:set
don't show slashes input
still need to test them all
* fixup broken commands
os array type a little broken
* bash
* fix lnms config:set os append
* enable os append test
(and small correction)
* fix whitespace
* lnms config:set works for os settings
validate against os schema (gives us path and value validation)
fix unset in config:set
json formatted output in config:get to match input parsing
* inline errors
* Check that OS exists
* Fix lock file
* Set param type
* correct method name, it no longer returns a boolean
* rename --json to --dump
tests and fixes
* fix whitespace
* missed one whitespace
* typehints
* add connection typehint
* try again
- Add missed units for config definition
- And remove units from translate strings
- Change values in the document to the actual default value
- Sort configs in the document by order
- Replace redundant text with "please refer to"
- Add instruction to use Web GUI setting
* Use GitLab instead of Gitlab
Only change text part, the Alert.Transport.Gitlab class left as is.
* Fix href in document
* Move section in document
The agent list in this document is sorted by alphabetical order,
"SDFS info" is the only exception.
* Remove trailing spaces in document
* Align code in document
* Fix Markdown in document
- Escape underline
- Add syntax highlight
- Add two space in the end of line to make it a newline
- Add newline before list or code section
* Update LibreNMS/Alert/Transport/Gitlab.php
Co-authored-by: Jellyfrog <Jellyfrog@users.noreply.github.com>
Better validation when config.php does not exist
Update docs and quote password
only populate legacy vars in config_to_json
drop .travis.yml config copy
remove credentials from config.php.default
Check for existance of .env instead of config.php in python scripts
legacy credential cleanup
tiny cleanups
consistent env for artisan server and artisan dusk
* Added bad_iftype to iosxe.yaml definition
* Update Configuration.md
Updated file location from includes/defaults.inc.php to misc/config_definitions.json and added an example of OS specific bad_iftype entries.
* Added OS Specific example for ignoring interfaces and updated file location.
* Updated bad_if selection documentation
* Add more api helper functions
to centralize code more
* Enable cors
* Initial Legacy route in Laravel
* Force api v0 responses to json
Add a couple more routes
* more paths, pretty print the json response
pass parameters to the api function
* devices basic functions
* Port generic graph function
check permissions function accepts callback to avoid lots of if statements
* move vlans
* links
* graphs
* fdb
* health
* wireless
* port graphs
* ip functions
split em up
* port_stack
* components
* compoment add/edit/delete
* get_device_groups
* port stats
* port graphs
* get_devices_by_group
* port_groups
* api_get_graph
* show_endpoints
* get_bill
* get_bill_graph
* get_bill_graphdata
* get_bill_history
* get_bill_history_graph
* remaining bill functions
* list_alerts
* ack/unmute alert
* Some cleanups
* Some cleanups
* list_alert_rules
* alert rule add/edit/delete
* inventory
* list_cbgp
* vrf
* list_ipsec
* list_fdb
* list_links (fix both usages)
* list_locations
* list_locations
* list_vlans
* list_ip_addresses
* list_arp
* list_ip_networks
* cleanup
* services
* list_logs and fix authlog.......
* cleanup
* cleanup 2
* remove slim
* don't load schema more than once
* basic test
* fix style
* downgrade laravel-cors to a version that supports PHP 7.1
* clean 1-Minute-Polling.md formatting
* cleanup formatting for Adding-a-Device.md
* clean up formatting of Cleanup-options.md
* cleanup formatting some for CLI-Tools.md
* cleanup formatting for Syslog.md and Configuration.md
* cleanup formatting for Device-Sensors.md
* cleanup formatting for Device-Troubleshooting.md
* cleanup Discovery Support.md
* cleanup Environment-Variables.md
* cleanup Example-Hardware-Setup.md and FAQ.mg
* update Features.md, Install Validation.md, Perfermance.md, Poller Support.md, and index.md
* cleanup Remote-Monitoring-VPN.md, SNMP-Configuration-Examples.md, and SSL-Configuration.md
* lots of updates for Installation docs
* more installation doc cleanup
* more formatting cleanup
* clean Work-Map.md up some
* Rewrite user management.
Error management
Revert edituser legacy page
Connect user permissions button to legacy page for now.
Implement user creation
Refine form
Remove PingCheck.php accidental add :)
Fixes for redirection and deletion
More fixes: realname accidental validation setting, hide can modify for read-only auths
Use a panel to improve style
Add icon to panel-title
Not allowed to delete own user (at least via the click of a button)
Use request validation to reduce complexity of controller.
Improve protection against users doing things they should not.
Switch to horizontal form and not nearly as wide of layout :)
delete without refresh.
Fix for buttons
Include all users (not just from this auth)
Hide the auth column if there is only one auth type
Show username if real name isn't set
Don't allow creation of demo users via the webui
a fix to the lnms user:add command, it didn't set auth_id
update edituser.inc.php to current
just redirect to users page
* Remove TwoFactorTest for now
* Update edituser.inc.php
* Update .env.dusk.testing
* Enable 2fa for 2fa test...
* Automatic sensor limits are now optional. Set ['discovery']['sensors']['autolimit'] = false to disable.
* Changing new config variable name from discovery.sensors.autolimit to sensors.guess_limits
* Updated documentation: ['sensors']['guess_limits'] value added
* Migration script and data feeding
* Adding the columns in the GUI
* build schema
* update FDB test data
* Use of timestamps()
* ignore created_at and updated_at in tests, and regenerate test impacted
* daily.sh does the cleaning
* space cleaning codeclimate
* Use carbon instead of str-val
* handle when $fdb_entry->updated_at and created at are null
* handle when $fdb_entry->updated_at and created at are null (force travis rerun)
* Doc update
* Doc update
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [X] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
This pull req adds support for Rancid GIT backend (instead of the current supported SVN).
Not only git is preferred these days, also php-svn is non-existing on php 7+, so the only Rancid option is broken on PHP 7+, so might be nice to have this included :)
* feature: Added dynamic graphs with RrdGraphJS by oetiker (https://github.com/oetiker/RrdGraphJS)
* fixed DragCursor.cur
* refactoring, only js when needed
* doc: added use of dynamic graphs switch in Configuration.md
* Updated to use Config, schema + example gif
* Rename 261.sql to 262.sql
Added more information on how to setup collectd. Noted that the rrd location set in config.php needs to match /etc/collectd.conf and /etc/collectd.d/rrdtool.conf.
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
Changed some values to be explicitly boolean
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
* refactor: Use snmp.version config option to allow users to set versions available
* Updated to just use snmp default version for auto discovery
* remove additional spaces
* remove use Config
