* Init work on rutos-3xx
* Add RUT360 support in rutos-rutx
* Testdata
* Removed old files
* Removed unused pre-caching
* Undo changes to mib
* Modified rutx11 test data
* Changed state_name
* Revert "Changed state_name"
This reverts commit fb61f8df67.
* Changed state_name
* Changed state_name
* Changed state_name and hopefully fixes tests
* Changed rutx11 test data
* Changed state_name back
* Revert
* Fixed state_name to avoid collision
* Updated rut360 test data
* Modified rutx11 test data
* Fixed typo
* Updated test data for rutx11
* Raspberry Pi: Add SNMP extend to monitor IO pins or sensor modules connected to the GPIO header
* Raspberry Pi: Add new test data
* Raspberry Pi: Make styleci happy
* Raspberry Pi: Fix some more style issues
* Raspberry Pi: Use d_echo for array debug
* Raspberry Pi: Prevent processing if the extension is not present
* Raspberry Pi: Make styleci happy
* Raspberry Pi: Update test data
* Raspberry Pi: Remove debugging
* Add Processor discovery for Dell PowerConnect 28xx
* Add Temperature discovery and cleanup code
* Add test data for PowerConnect 2824
* Add Serial Number
* Don't add VLANs as Ports
* Revert "Don't add VLANs as Ports"
* Remove invalid mempool from tests
* Introduce OS flag to support devices that deliver OIDs out of order
* Add MIB for Bintec Be.IP Plus
* Add YAML definitions for Bintec Be.IP Plus
* Add Bintec be.IP plus test files
* Rename bintec mib files
mib-standards.mib was deleted, because it included definitions that also
existed in separate files
* Add test data
* Remove standard mib files from bintec dir
* Add regex to parse Bintec Be.IP Plus OS version
* Update test data for Bintec Be.IP Plus
* Calculate Bintec Be.IP Plus CPU load from inverse of idle time
* Improve Bintec Be.IP Plus discovery and tests
* Use MIB instead of numerical OIDs where possible
* Update tests to comply with updated discovery
* Remove unused MIBs
* Remove json props that let tests fail
* Update Settings.md
* Remove `snmp_out_of_order_oids` definition from bintec-beip-plus
* Add `-Cc` snmp param for prots module
* Add `-Cc` snmp param for arp-table module
* remove snmp_out_of_order_oids
* Remove snmp_out_of_order_oids
* Update snmp.inc.php
Co-authored-by: Tony Murray <[email protected]>
* Improve Poweralert based devices support
- Add graphs / data for Input Voltage
- Add graphs / data for Total/Output Current
* fix version formatting
* Create poweralert_3.snmprec
* Create poweralert_3.json
* Update poweralert.yaml
* Update poweralert_3.snmprec
* Update poweralert_3.json
* Missed one
Co-authored-by: Tony Murray <[email protected]>
* Add Sophos-XG OID for monitoring HA and license state
* add generic property
* Update MIB to newest version
* Add Test-data for sfosCentralOrchestrationLicRegStatus
* Add IPSec monitoring
* regenerate test-data
* Correctly implement Wireless Sensors for Teltonila RUTX series routers allowing for hardware with multiple modems
Fix sensor warning limits based on hardware specs.
* Re-capture test data for new sensors
* Tidy style
* no message
* no message
* Update RutosRutx.php
Co-authored-by: Jellyfrog <[email protected]>
* Added ambient temp sensor and XUPS alarm OIDs
* I dumbed this down a bit, as I do not fully trust that I actually understand the xups mib.
Now we raise an alert if XUPS-MIB::xupsAlarms.0 is anywhere in the range 1-4
* Changed the index:-value for consistency
* added snmprec and json for my hardware/firwmare version
* reran save-test-data against all variants and renamed my latest snmprec properly
* Update eaton-mgeups_9pxle.json
Co-authored-by: Tony Murray <[email protected]>
* don't hardcode index for Mikrotik LTE wireless statistics
* sync test data now that Mikrotik LTE index is no longer hardcoded
* sync tests data now that Mikrotik LTE index is no longer hardcoded
* fix whitespace
* sync test data now that Mikrotik LTE index is no longer hardcoded
* add test data for Mikrotik LtAP mini (aka RB912R-2nD)
* Re-write Routeros wireless code
It now works like most other devices
* fix style
* update baseline
* Remove station 60G rate
* use base unit of m, not km
* move interface stats name inside loop to avoid a walk when it does exist
* notification
* fix typo
Co-authored-by: Tony Murray <[email protected]>
* remove ^M from DOS style file
* Support for West Mountain 4005i DC PDU
* update SVG to include width attributes
* try adding reserveAspectRatio="xMinYMin meet"
* remove width attribute
* removed disabled modules per @Jellyfrog comment
* rename per PR
* add missing test JSON data
* don't attempt to graph or detect uptime, as neither OID is supported
* remove file extension
* remove specific modules for discovery & polling, as this device isnt buggy enough for justify
* Update westmountainradio.yaml
* Update westmountainradio.yaml
Co-authored-by: Tony Murray <[email protected]>
* Core module WIP
* update OS::make()
* core WIP
* try to finish up
* switch all core do os Model
* Mock WIP
* Working tests
* cleanup
* phpstan fixes
* style fixes
* fix agent
* trim space too
and a couple of cleanups
* corrected ios test data
* missed space
* update test data
* put escapes back
* another net-snmp difference
* Fix class description
* revert snmp.inc.php change, that can be a different PR
* revert snmp.inc.php change, that can be a different PR
* Add new OID for humidity sensor for opengear devices.
* Typo fix
* Fixed typo: wrong OID
* Added opengear humidity test data JSON
* Removed ogEmdHumidityTable from cache.
* Added SNMP sim data for testing
* Update opengear_humidity.json
Co-authored-by: Tony Murray <[email protected]>
* endrun_updated_support
* Added requested changes
* Converted to yaml
* Fixed Tempus Features
* fixed test data (again)
* Update endrun_sonoma.json
* fix gitignore
* fix last gitignore
Co-authored-by: Tony Murray <[email protected]>
* Updated mib
* Add support for IOS/IOSXE PoE stats
* Added testdata
* Better titles for Power-tab in Health
* Added low_limit for iosxe
* Update ios_2960x.json
* Added high_limit for ios
* update ios_2960x
* update ios_2900l
* pre-cache is not needed
will only slow polling down in some cases
Co-authored-by: Tony Murray <[email protected]>
* Use high precision OIDs for APC UPS sensors
* Force test re-run
* Remove ifHighSpeed
Co-authored-by: PipoCanaja <[email protected]>
Co-authored-by: Tony Murray <[email protected]>
* Updated mib
* Add support for IOS/IOSXE PoE stats
* Added testdata
* Better titles for Power-tab in Health
* Added low_limit for iosxe
* Basic support for Enviromux devices
* Fixes
* Revert "Added low_limit for iosxe"
This reverts commit 645e3b423a.
* Removed commits from wrong branch
* Removed limits due to not working, need php
* Added testdata
* Update nti.svg
Co-authored-by: Jellyfrog <[email protected]>
* Added support for Teltonika RUTX series routers
* Added snmprec file for testing
* Update and rename rutos-RUTX.yaml to rutos-rutx.yaml
Fix OS name
* Rename rutos-RUTX.yaml to rutos-rutx.yaml
* Rename rutos-RUTX_rutx11.snmprec to rutos-rutx_rutx11.snmprec
* Create rutos-rutx_rutx11.json
* Fix: Device discovery OID removed tab
* Remove whitespace
Co-authored-by: Tony Murray <[email protected]>
Co-authored-by: hjcday <[email protected]>
* Initial commit
* Removed unused function
* fixed style
* fixed style
* fixed test data
* Initial commit
* end of the day commit
* finish + test data
* Delete ericsson-tn_ericsson-tn.snmprec
* Teldat: Wireless and GSM Basic Monitoring
* Teldat: Wireless IfIndex fix
* Teldat: Wireless and GSM tests
* minor comment correction
* Teldat: Wireless and GSM add json test data
* linter.warn: bugfix access_point_id = null, generally used for controllers, TELDATs are never controllers
* Teldat: Wireless and GSM tests replay results.
* linter.warn: fix#17 $entPhysicalMeasured expects float|int|null set to: null
* Teldat: Wireless and GSM some updates, bugfixes and lint updates as requested.
* linter : some more fixes...
* Teldat: Wireless and GSM, apply recommendations.
* minor styleCI fix.
* linter: fix
* linter: fix.
* Delete WirelessLteCellPolling.php
Co-authored-by: Tony Murray <[email protected]>
* Add power consumed
* Revert "Add power consumed"
This reverts commit 424554ac04bd340de2fd962cb6808045024ef783.
* Start with tempsensorts aus some states
* Inventory data
* Convert plugins to Blade
* Revert "Convert plugins to Blade"
This reverts commit 8d1d3ff5b1.
* fix style
* Add FANs and Powersupplies
* fix style
* add test data
* add a short description for the doc
* refresh Testfile
* Add hardware, OS version and serial to arubaos-cx discovery
* Add support for ArubaOS-CX versions 10.04 and 10.06
* Fix bug where first arubaos-cx regex would be ignored
* Add test data for 10.07, data for 10.06 coming soon
* Add data for 10.06
* Update 10.04 test data
* Update arubaos-cx.json
* Update arubaos-cx_10.06.json
* Update arubaos-cx_10.07.json
Co-authored-by: Tony Murray <[email protected]>
* Added SAF Integra-X support.
* Fixed discovery confusion between Integra-B and Integra-X.
* Removed a missed unusued use statement.
* Fixed CPU sensor issues related to MIB display hints throwing off math.
* Fix to Integra-X snmprec and test data.
* Add mibs/zte/ZXR10-MIB
ZTE ZXR10 vendor-specific mibs
* Update zxr10.yaml
add mib_dir
change top-line view like in cisco
* Create zxr10.yaml
define mempool and processor discovery for zxr10
* Update zxr10.yaml
fix discovery.php "error in mempools module. Unable to translate oid ZXR10-MIB::zxr10SystemMemSize"
* Update zxr10.yaml
ZXR10-MIB::zxr10SystemMemUsed is in percent not in bytes.
* zxr10.yaml :: fixed mempools data
fixed mempools data
* TESTS :: Add snmprec
* TEST :: Add data/json
* Change group from zxr10 to zte
* Remove mib_dir
With group: zte it works without mib_dir: zte
* Rename zxr10_zxr10.json to zte_zxr10.json
* Rename zxr10_zxr10.snmprec to zte_zxr10.snmprec
* Removed older Horizon definitions
* Added Horizon Compact definitions via YAML.
* Added Horizon Duo definitions via YAML.
* Added Horizon Compact Plus definitions via YAML.
* Fixed issue with OID name casing for Horizon Duo EnetPort2CRC sensor
* Moved SNR/RSL/Tx Power to wireless sensor definitions.
* Reordered use statements to make StyleCI happy.
* Rewrite ISIS Adjacency discovery/polling
hopefully much faster now, do most work in discovery and just check up/down in poller.
* unused variable
* Implement option for OS override
* fix an incorrect typehint
* test data
* work around stupid migration name
* update schema
* better handling for the on-demand discovery
* more detailed phpdoc
* fix when adjacency is not found
* don't clear out data when adjacency goes away
* Adjust nullable fields
* fixes
* fix class name
* correct migration
* fix bug causing adjacency data to always be blank
* port popups for port links
* isisISAdjState does not need to be nullable
* remove extra space
* default off
* If port is missing return $text
* update schema
* Cleanup old components
* correc copy paste error
martinbergandGitHub
Maikel de BoerandGitHub
Daniel RomeroandGitHub
Peca NesovanovicandGitHub
Denny FriebeandGitHub
Garcia MICHELandGitHub
David GirónandGitHub
Tony MurrayandGitHub
Dan BakerandGitHub
NocturrandGitHub
TheGreatDocandGitHub
Maikel de BoerandGitHub
Max NarvaezandGitHub
Kevin ZinkandGitHub
Noah RoufusandGitHub
pauliercoandGitHub
Valery KartelandGitHub