* Add migrations and seeds
* Fix spacing validation issues
* Fix linting
* Update tabs to spaces
* Update daily and install process
* Make build-base.php use the new migrations if empty or at dbschema 1000.
Seed 1000 into the database.
Temp fix for the route table index length (this table basically isn't used...)
* Fix typo in seed.
Hard code legacy schema checks to version 1000 (999 would have worked as is)
* Port association table no longer exists
* Make database validate again
* DB schema, remove as many DB::statement as possible
* update migrations
add librenms cli entry point (artisan)
update validate to check laravel migrations
* remove statements from users migration
* Fix up daily.sh and the 1000 migration
* Update migrations to current state
Take advantage of environment variables to set DB credentials.
* Fix style issues
* Update schema
* fix test db collation
* Fix migration table definition
* update db migrations
* Update migrations
* Update stats callback. Just count the total migrations applied.
* Update 1000.sql.
* update migrations
* remove the graph type seeder, it is no longer needed
* update docs
* fix whitespace
* remove extra schema
* update tests
* fix sort
* add message
* dbSchema should actually be 1000
* add character set to db create
* Fix some artisan issues
* Update schema
* Graph definitions
* Stacked.
* Add display
* remove old poll-log, add redirect
* Handle undefined data in graphs
* Standard pollers
* Change doc to send to the global poller module page.
* remove test code :)
* Link parent menu
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
After you are done testing, you can remove the changes with `./scripts/github-remove`. If there are schema changes, you can ask on discord how to revert.
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
After you are done testing, you can remove the changes with `./scripts/github-remove`. If there are schema changes, you can ask on discord how to revert.
* Force root url if set by user
If user sets APP_URL, force the root url to that. Empty strings result in default behavior.
Fix some of the urls in the laravel templates.
* Docs update
* Add base_url
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [ ] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
After you are done testing, you can remove the changes with `./scripts/github-remove`. If there are schema changes, you can ask on discord how to revert.
* Allow trusted proxy via APP_TRUSTED_PROXIES
Set to '*' by default to emulate legacy behavior.
Set up doc describing environment variables
* Create helper to parse environment variables into arrays properly.
* Update doc blocks
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [X] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
This pull req adds support for Rancid GIT backend (instead of the current supported SVN).
Not only git is preferred these days, also php-svn is non-existing on php 7+, so the only Rancid option is broken on PHP 7+, so might be nice to have this included :)
* feature: Added dynamic graphs with RrdGraphJS by oetiker (https://github.com/oetiker/RrdGraphJS)
* fixed DragCursor.cur
* refactoring, only js when needed
* doc: added use of dynamic graphs switch in Configuration.md
* Updated to use Config, schema + example gif
* Rename 261.sql to 262.sql
Added more information on how to setup collectd. Noted that the rrd location set in config.php needs to match /etc/collectd.conf and /etc/collectd.d/rrdtool.conf.
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
Just followed the docs after installation and stumbled about this, which caused some irritation.
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [ ] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
Mostly useful for debugging
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
Now with optparse (python 2.3+)
Does not include your doc updates @laf
If I get some time later, I'll add them, feel free to as well.
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [ ] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
* Ability to enable debug output with wrappers
Output is redirected to a per-device file in the log directory.
* Add warning
* Added some docs to help with debugging using this new option
Changed some values to be explicitly boolean
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
* Documentation updates for DMI support and making two links in the FAQ work
* Update SNMP-Configuration-Examples.md
* Update SNMP-Configuration-Examples.md
* Update snmpd.conf.example
* Update SNMP-Configuration-Examples.md
* refactor: Use snmp.version config option to allow users to set versions available
* Updated to just use snmp default version for auto discovery
* remove additional spaces
* remove use Config
* refactor: Updated discovery to use a core module for sysDescr/sysObjectID use
* final update hopefully
* revert changes
* more changes + docs
* migrated poller to use numerical sysObjectID
* more updates for sysObjectID
* update any alert rules which might have enterprises. in
* moved schema file
* small updates
* updated getHostOS()
* scrut fixes
* updated sysObjectId -> sysObjectID
* updated sysObjectId -> sysObjectID
* updated remainder of sysObjectId -> sysObjectID
* another sysObjectId -> sysObjectID
* fixed secureplatform test data
* Fix tests: $device is not pulled from the database before polling
Also, update the db in the core discovery module.
* Test docs before deploying
fix issue with docs
* Actually check the result of the doc build
add error for testing
* Fix up docs
* use original logic
* only deploy docs if build succeeds.
Make pip quiet
* device: Rittal IT Chiller / Carel pCOweb
* doc: more documentation about the pcoweb card
* Update Carel-pCOweb-Devices.md
* change the limit for sensors and small changes
* fixed db_schema
* doc updates and sql fix
* doc update
* remove the eer graph to create a sensor
* doc: create device sensor help doc.
this should help users that get confused when receiving alerts for sensors.
* Update mkdocs.yml
* Update Device-Sensors.md
* Update Device-Sensors.md
* Update Device-Sensors.md
changes requested
