This is a fix for #8746, which added support of SFP module discovery on Procurve devices. I noticed a lot of false positive alerts for current bias when we launched this in production, so looked once more through MIB/code.
MIB data:
hpicfXcvrBias - Tx bias current in microamps
hpicfXcvrBiasHiAlarm - Transceiver bias high alarm threshold limit in microamps
hpicfXcvrBiasLoAlarm - Transceiver bias low alarm threshold limit in microamps
Sensor discovery sample:
hpicfXcvrBias.49 = 23254
hpicfXcvrBiasHiAlarm.49 = 100000
hpicfXcvrBiasLoAlarm.49 = 0
hpicfXcvrBiasHiWarn.49 = 90000
hpicfXcvrBiasLoWarn.49 = 100
So yes, my mistake was to use 10^-7 instead of 10^-6 divisor for these fields. Fix is in this pull request. Sorry for the inconveniences caused.
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [ ] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
Current implementation for Force10 series doesn't support the switch-blade M-Series model. This PR adds support for mempools and temperature. In my test environment (still 1.31) I have processors utilization support as well, but I have to test that in the new way processors are handled since 1.37
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
* Add vrf for non mpls cisco devices, add mib and test data
* Fix custom_where in vrf module
* Better VRF module test data collection
* Update ios_6500.json
* don't include ifVrf in ports
* update all ports add dependencies to pre-commit.php
* new json files
* Adding VRP support for FDB table using HUAWEI-L2MAM-MIB
* Test data + review corrections
* Test data correction
* Remove double text
* PHP EOL at the right spot
* Rename vrp_5720.fdb.snmprec to vrp_5720.snmprec
* Update vrp_5720.snmprec
* Create vrp_5720.json
* Update vrp_5720.json
* Update vrp_5720.json
* Fix fdb query, test data, and mibs
* fix OIDs for temperature sensor and add test data
* Add current values to discover sensor and test data
* Redo test data
* Split up power/current/voltage sensors to individual files and remove json data
* Whitespace fix
* Fix temperature sensors - spelling mistakes
* Code changes to voltage/power/current sensors
* Go to yaml, add mibs and json
* Add netspire os support
* Update netspire.yaml
* Change from numerical oid to regular oid and readd poller/discovery modules
* Remove mib_dir and change os polling
* Add support for Allied Telesis AlliedWare Plus products
- Uses mibs from 5.4.7-2.1 for AlliedWare Plus products
- Updates Legacy AlliedWare mibs
- Added Allied Telesis svg
* Remove unnecessary "trim" from snmpget
* Add new line to end of file
* Minor fixes for commit
* awplus: initial ntp commit
This isn't completely working, however initial patch of it partially working
* awplus: Add NTP support
- Fixed polling issues for awplus. Now offset and delay graphs work.
- html/includes/graphs/device/ntp_*.inc.php
-- Removed extra "\" from MAX count which showed up in Graph legend
- html/includes/graphs/device/ntp_delay.inc.php
-- Present legend in either seconds, or milliseconds (depending on vendor)
- html/includes/graphs/device/ntp_dispersion.inc.php
-- Present legend in either seconds, or milliseconds (depending on vendor)
- html/includes/graphs/device/ntp_offset.inc.php
-- Removed rrd minimum (-l 0). This is because offset can be below 0.
--- It's better for the graph to auto scale than set a fixed minimum to display here.
- html/includes/graphs/device/ntp_stratum.inc.php
-- Changed graph to go from 0 to max of 16. NTP Stratum can only be 0 to 16.
* awplus: Add NTP test data
* updated awplus ntp poller
* device: awplus convert NTP poller into seconds
* device: fix NTP graph formatting
* device: Improve NTP formatting
* device: unset awplus NTP variable
* fix formatting
* device: awplus change NTP from numerical OIDs to named
* device: update awplus ntp json tests
* device: fix cisco and awplus ntp database creation
* device: update awplus json
* Fix Q-BRIDGE-MIB VLANs
Properly handle dot1qVlanTimeMark index (by ignoring it instead of assuming it is 0)
Adds test data for at least one device that uses Q-BRIDGE-MIB.
Fixes: #8516
* fix whitespace
* remove unused variable
* Update boss.inc.php
Another easter egg for the rebranding of voss and boss. Lost the memory usage. Modifying allowed the voss and boss to graph memory again.
* Update voss.inc.php
Another easter egg for the rebranding of voss and boss. Lost the memory usage. Modifying allowed the voss and boss to graph memory again.
* Rename voss.inc.php to avaya-vsp.inc.php
* Rename boss.inc.php to avaya-ers.inc.php
* Update voss.inc.php
* Update boss.inc.php
* changed limit values in routeros.yaml to allow for the divisor value of 10
* changed the code so divisor/multiplier is only used for oids
* updated json test file
* Update avaya-ers.yaml
Extreme bought avaya network assests so rebranding and moving some files.
* Add files via upload
Extreme bought avaya networking assets and so rebranding to Extreme and adding logos with OS for easier reading when on devices pages
* Update avaya-vsp.yaml
removing .1.3.6.1.4.1.45.3.79.1 This is a VSP 7024xl from avaya. This is techincally not VOSS but BOSS operating system. It should be in BOSS and avaya-ers.yaml
* Add files via upload
* Update and rename avaya-vsp.inc.php to extreme-voss.inc.php
* Update and rename avaya-vsp.inc.php to extreme-voss.inc.php
* Update and rename avaya-vsp.inc.php to extreme-voss.inc.php
* Update extreme-voss.inc.php
* Rename avaya-vsp.inc.php to extreme-voss.inc.php
* Rename avaya-vsp.inc.php to extreme-voss.inc.php
* Rename avaya-vsp.yaml to extreme-voss.yaml
* Update and rename avaya-vsp.yaml to extreme-voss.yaml
* Update avaya-ers.yaml
* Rename avaya-ers.yaml to extreme-boss.yaml
* Rename avaya-ers.inc.php to extreme-boss.inc.php
* Update and rename avaya-ers.inc.php to extreme-boss.inc.php
* Update and rename avaya-ers.inc.php to extreme-boss.inc.php
* Update and rename avaya-ers.inc.php to extreme-boss.inc.php
* Update and rename avaya-ers.inc.php to extreme-boss.inc.php
* Update and rename avaya-ers.inc.php to extreme-boss.inc.php
* Update extreme-boss.yaml
* Update extreme-voss.yaml
* Update and rename extreme-boss.yaml to boss.yaml
* Update extreme-voss.yaml
* Rename extreme-voss.yaml to voss.yaml
* Rename extreme-boss.inc.php to boss.inc.php
* Rename extreme-voss.inc.php to voss.inc.php
* Rename extreme-boss.inc.php to boss.inc.php
* Rename extreme-voss.inc.php to voss.inc.php
* Update and rename extreme-voss.inc.php to voss.inc.php
* Rename extreme-voss.yaml to voss.yaml
* Rename extreme-voss.inc.php to voss.inc.php
* Update and rename extreme-voss.inc.php to voss.inc.php
* Update and rename extreme-boss.inc.php to boss.inc.php
* Update and rename extreme-boss.inc.php to boss.inc.php
* Update and rename extreme-boss.inc.php to boss.inc.php
* Rename extreme-boss.inc.php to boss.inc.php
* Update voss.inc.php
* Update boss.inc.php
* Update boss.inc.php
* Update voss.inc.php
* Update voss.inc.php
* Update voss.inc.php
* Update voss.inc.php
* Update voss.inc.php
* Update voss.inc.php
* Update boss.inc.php
* Update boss.inc.php
* Update voss.inc.php
* Update boss.inc.php
* Update voss.inc.php
* Update voss.inc.php
* Rename avaya-vsp_8404c.snmprec to voss_8404c.snmprec
* Rename avaya-vsp_8404.snmprec to voss_8404.snmprec
* Rename avaya-vsp_8284xsq.snmprec to voss_8284xsq.snmprec
* Rename avaya-vsp_7254xtq.snmprec to voss_7254xtq.snmprec
* Rename avaya-vsp_7254xsq.snmprec to voss_7254xsq.snmprec
* Rename avaya-vsp_7024xls.snmprec to boss_7024xls.snmprec
* Rename avaya-vsp_4850gts.snmprec to voss_4850gts.snmprec
* Rename avaya-vsp_4850gts-pwr.snmprec to voss_4850gts-pwr.snmprec
* Rename avaya-vsp_4450gsx-pwr.snmprec to voss_4450gsx-pwr.snmprec
* Rename avaya-ers.snmprec to boss.snmprec
* Rename avaya-ers_1.snmprec to boss_1.snmprec
* Update and rename avaya-ers.json to boss.json
* Update and rename avaya-vsp_8404.json to voss_8404.json
* Update and rename avaya-vsp_8404c.json to voss_8404c.json
* Update and rename AvayaErs.php to Boss.php
* Update Boss.php
* Restore processor_type to avaya-ers in test data
* Update voss_8404c.json
* Update extremeboss.svg
* Update extremevoss.svg
* fix: Apply divisor / multiplier to high/low limits in sensors
* Updated test data for airos
* updated sensors test data
* Updated test data
* Updated test files
* updated dell-rpdu tests
* Updated to do division / multiply after check for value
* Moved temperature sensor to yaml
* Enabled sensors , it's working now
* Enable mempools and disable unused wireless discovery.
* Tests for fiberhome OS, variants can be merged on future
* Add Listmile mibs
Created custom lastmile mib
* Add Lastmile CTM support
* Update test description and remove wireless sensor
* Requested changes
Renamed OS
* json test data
* Updated test data
* updated discovery method
* added LF at EOF
* changed discovery data gather to an array loop
* updated per murrant's suggestions
* updated to only poll attribues if objects exist
* AeroHive 001
* AeroHive 002
* AeroHive 003
* Removed duplicate HiveOS for OS
* Added AP550 detection
* changed to Hiveos-Wireless
* changed back to HiveosWireless. Hiveoss-Wireless doesn't work
* changed back to HiveosWireless. Hiveoss-Wireless doesn't work
* Added Processor Usage.
* Added Mempool.
* working on review requests 001
* working on review requests 002
* stuck on radio stats
* WirelessSensor.php added channel 165
* Added AP250 snmprec
* Frequency work in progress.
* Frequency trying another way.
* Frequency trying another way 002
* Fixed AH-SMI-MIB? Added array try 003
* Frequency array is working thanks to Murrant.
* Frequency array description working.
* Added TX Power
* changed interface naming method
* Review changes 001
* Review changes 002
* Review changes 003
* Added json test data.
* Fixed test data 001.
* fix: Fixed and improved toner discovery
* Update konica data
xerox tries to insert too long of descriptions. Lets remove the part and serial number, they are ugly to look at in the ui.
* Changed to concat 32bit high.low counters
* Changed to concat 32bit high.low counters
* Correction. Needed to bit shift.
Correction. Needed to bit shift << 32 on high and add low.
* Correction. Needed to bit shift.
Correction. Needed to bit shift << 32 on high and add low.
* Added storage removed processor and memory
No point in processor and memory until nimble supports it. Added stroage to overhead.
* Fixing HP Proliant state sensors
* Numeric state data (-e)
Update to new state style
This currently cannot be tested. We don't discover sensors until the second discovery, because we poll 'hardware' instead of discover it.
* Fix whitespace
* Add contact,relay,outlet discovery; update yaml,snmprec,json
* Fix formatting
* Another attempt at fixing sensors
* Update state mappings and fix json sensor ordering
* Capture values numerically.
Remove extra if/else statement
Make test data more interesting.
* Fix whitespace.
* Update sensors test data for order_by
Default behaviour is to set low limit to (current temperature - 10 deg) and high limit to (current temperature + 20 deg) upon discovery. Changing that to abs values +5 and +35 deg respectively to be in realistic boundaries.
* Add Errors, NoiseFloor, RSSI, SNR and Utilization Wireless Sensors for ewc
* Enable processor/mempool support for ewc using existing enterasys implementation
* Add test data
