* Use GitLab instead of Gitlab
Only change text part, the Alert.Transport.Gitlab class left as is.
* Fix href in document
* Move section in document
The agent list in this document is sorted by alphabetical order,
"SDFS info" is the only exception.
* Remove trailing spaces in document
* Align code in document
* Fix Markdown in document
- Escape underline
- Add syntax highlight
- Add two space in the end of line to make it a newline
- Add newline before list or code section
* Update LibreNMS/Alert/Transport/Gitlab.php
Co-authored-by: Jellyfrog <Jellyfrog@users.noreply.github.com>
* Test the num_oid generation
* Refactor num_oid discovery
* cnt
* Cache the value to avoid unnecessary snmptranslate
* desc of function
* typo
* Negative caching as well
* Negative caching
* style
* Str::before
* Str::before
* Str::before
* Fix key, and model Devices
* types
* types
* doc update
* re-run tests
* Use Cache class
* Simplify caching and do it into oidToNumeric
* Simplify caching and do it into oidToNumeric
* style
* Extend to 3 hours
* and not ->cache_time
* force re-run tests
* only one OID for num_oid test
* rerun tests
* typo in MD
* restore
* Exemple
* Exemple
* light change
* test
* test
* test
* back to PR
* phpstan + suggestions from Tony
* fix firebrick num_oid
Co-authored-by: Tony Murray <murraytony@gmail.com>
* Developer device simulation
lnms dev:simulate
handy helper to start snmpsim with test data and optionally add and remove a device to LibreNMS
* doc update
* Cisco enhanced cellular support
* Extra sensors, camelcasing and bugfixes
* Doc update
* German translation
* French translation
* Style fixes
* Style changes
* Style changes
* Style changes
* Style changes
* Style changes
* Added test data
* New test data --variant
* New test data --variant ir1101
* Made the new wireless sensors generic
* Added test data for ios variant ir809
* Fix includes/discovery/sensors/count/cisco.inc.php, thanks PipoCanaja
* Moved cellular operating band from Wireless sensors to count sensor
* test data
* test data
* test data
* test data
* Moved ICCID/IMSI/IMEI to inventory
* test data and style fix
* Cellular state sensors now have a group
Co-authored-by: Maikel de Boer <mdb@tampnet.com>
* Add BGP discovery and polling for Dell OS10 devices
* Add BGP testing data for Dell OS10
* Add BGP testing data for Dell OS10 (fix)
* Add DB info for unit testing
DB_TEST_HOST must be changed when running mysql in a separate docker container or unit tests fail
* Set bgpLocalAs in discovery (fixes unit test fail)
Ideally the main `bgp-peers.inc.php` should be fixed so it does not
depend on finding bgpLocalAs from BGP4-MIB
* Change comment style
* Remove link to code in documentation
* Discover BGP counters
* Use IPv6 addresses in compressed format
* Updated the creating documentation page with more informationg on
building and viewing. Fixed some formatting and markup issues with
existing text.
* Minor corrections
* Revert "Minor corrections"
This reverts commit efbe4bde55.
* Minor corrections
* Update Creating-Documentation.md
* Update Creating-Documentation.md
* Update Creating-Documentation.md
Co-authored-by: Jellyfrog <Jellyfrog@users.noreply.github.com>
* Added tv_signal sensor class (TV signal in dBmV (decibells to millivolt))
* Added OS motorola-cm (Motorolla DOCSIS Cable Modem)
* Added OS thomson-cm (Thomson DOCSIS Cable Modem)
* Update Documentation
Most work in Graylog and SNMP
Fixed many code tags, spelling and wording.
Added SNMP PowerShell example.
* Update SNMP-Configuration-Examples.md
Fix TOC brackets
* mempools to modern module
quick hacky hrstorage port
* port ucd-snmp-mib to Mempools
* Populate DB for ucd
Prep for yaml
* initial yaml attempt
* more complex conversions
fixes to YamlDiscovery, make leading $ optional and allow mib::oid format
* walk full tables and skip values
normalize percentages above 100
* handle precent only ones (specify total as 100)
* Move default polling out of YamlMempoolsDiscovery
* fixes
* Update test data hrstorage should be correct.
* perc_warn for hrstorage
* Host Resources, record buffer, cached, and shared
* Host Resources is always better, don't do both HR and UCD
* fix unix, include warning levels
* variable size
* consolidate skip_values
* define mempools schema
* number instead of integer
* more schema refactor
* one more skip_values reference
* throw error for invalid oid translation
aos6
* a* and Cisco
* updated test data
* update almost all hrstorage data files
* b*
* c* with test data
use standard cache for hrStorage
* use cache for storage module too
* hand bsnmp properly
* bdcom
* exclude total oid from yaml so it is not polled
May add a way to ignore this behavior and poll it, but I don't know if that is needed.
* automatically handle percent only values
* ciscowlc
* only poll used or free if we have used, free, and total.
* fix skipping
* the dlinkoning
fix find value when value "name" is numeric
* support numeric oids
* dnos/ftos attempt
* I guess we can't filter on total > 0
* edgecos
* e*
* f WIP
* f*
* gwd (aka g*)
* h* + procurve
* i*
* j*
* m*
* support 0% used memory (however unlikely)
* n*
* CISCO-PROCESS-MIB memory, share cache with processors module
* ignore mempools with invalid total
* p*
* quanta
* r*
fix raisecom mibs terribly broken
* s-z
* style fixes
* Move VRP back to PHP and make it actually work
* fix zynos
* update schema
* Update Cisco processor data for description bug fixes
* fix comware processors
* comware mempools with memory size
default precision to 1
* sophos-xg updated data
* hrstorage use ram size for buffers, cache, and shared
* Show memory available instead of free in device overview
* UCD, use same rrd format, store available instead of free in the db.
* Calculate availability for HOST-RESOURCES-MIB
* Convert UCD to standard polling
* rename old rrd files
* initial graph work
* graph WIP
* Graph looking decent
* Graph looking decent for hr
* remove old ucd_graph code
* handle availability mempool
more graph cleanup
* color adjustments
* remove accidental free calculation
* Update test data and fix corner cases
* fis pfsense
* update schema
* add default value for mempool_class
* fix whitespace
* update schema
* update schema correctly
* one more time
* fortigate_1500d-sensors missing oids
* Update docs.
* fix indent
* add implements MempoolsDiscovery explicitly to OS
* remove ucd_memory graph references
remove unused device_memory graph
* remove unused functions
* set devices with mempools to rediscover to prevent/minimize gaps
* use a subquery
* add overview graph
* port health mempools table
* Update device mempool
* only show overview if multiple
* Don't override user set warn percentages in discovery
* fix missed usage
* fix style
* Safety check to not rename rrd files incorrectly if migration has not been run.
* Fix overview percent bar and represent available and used on the bar
* missed an item to convert to mempool_class
* percent on the wrong side
* split siteboss 530 and 550 into multiple OS
* add more sensors to siteboss550 and new Percent sensor
* fix contact closure event state values
* split os polling for siteboss to siteboss530 and siteboss550
* add test unit for siteboss550, rename test unit for siteboss to siteboss530
* refactor siteboss os polling to \Librenms\OS
* implement OSPolling to Sitebos550
* force save in pollOS() to keep custom sysName during polling
* updated unit test
* update device graphs
* remove pollOS and extra save()
* siteboss550 no longer extends OSPolling
* update siteboss550 test data
* update discoverOS() to match recent os discovery changes
* styleCI changes
* fix siteboss hardware discovery; add check to OS polling if os_group .inc file exists
* collapse siteboss to single OS, implement siteboss sensors in advanced discovery
* add siteboss unit tests
* removed unneeded OS disco defs
* styleCI changes
* more styleCI changes
* split siteboss os to siteboss530 and siteboss550
* split siteboss os to siteboss530 and siteboss550
* move php polling back into yaml
* keep original siteboss OS name
* resave snmp data for siteboss OS
* resave snmp data for siteboss550 OS
* removing $graphs global
* remove unused things
* fix some additional graphs
* Fix graphs persisting too soon
* correct name for poller module performance graph
* only one type of graph is used here
* Change Units on Noise Floor
I may be wrong, but I think this should just be dBm (i.e. integrated over the carrier bandwidth). The numbers look much too high to me to be on a per Hz basis.
If I am correct here, this should also be updated in the web interface.
Thanks!
* Update php, correct units for Wireless noise-floor
* Wireless Frequency, don't format_si, to avoid kMHz units
* Update Wireless noise-floor units, in RRD plots
* Added discovery and graphing for JunOS (SRX) RPM probes
* Proposed changes for a percent based sensor type
* Fixed missing MIB declaration in JunOS YAML discovery file
* Updated Health-information.md to reflect the new percentage value type
* Added separate test data for junos_rpm type
* Update sensors.php
* Update sensors.php
* Update functions.inc.php
* test re-run
* Update junos_rpm.json
* percentage -> loss
* add ifSpeed prev test data
* mis-merge
* update sensors
* and bgp...
Co-authored-by: PipoCanaja <38363551+PipoCanaja@users.noreply.github.com>
Co-authored-by: Tony Murray <murraytony@gmail.com>
* added functionality to set sysLocation override in $os.inc.php files
* php styling fixes
* updated docs for location override in $os.inc.php
* patch poweralert.inc.php to use $location override
* added location override for enexus (Eltek)
* update phpdoc for set_device_location()
* converged location code in core.inc.php to use set_device_location()
* added new snmprec test data for enexus os
* Travis test data
* remove enexus_smartpacks2 test data
* Revert "remove enexus_smartpacks2 test data"
This reverts commit 36c8fc7036.
* updated enexus_smartpacks2 test data with generic syslocation
* kick travis CI
* kick travis CI
* Migrate ironware sensor discovery from php to yaml.
* More sensors, add grouping.
* dynamic_discovery_get_value() becomes getValueFromData()
* Target a specific index with skip_values.
* Improve Brocade BGP session discovery/polling
This commit allows for the correct discovery of BGP sessions
with 32-bit ASNs, IPv6 neighbors using the BGP4V2-MIB which is
based on draft-ietf-idr-bgp4-mibv2-11 and also polls for IPv4
unicast received routes through the FOUNDRY-SN-BGP4-GROUP-MIB.
Copied most of the code from PR#8877 by @Mikeburke14, cleaned
up the code a little bit to match the normal LibreNMS style,
and fixed bgpPeers_cbgp discovery as well as polling for the
ipv4.unicast neighbors.
Note that older Brocade IronWare firmware versions are known
to have multiple defects relating to the BGP4V2-MIB which
might result in certain missing non-established neighbors.
Related vendor defect numbers:
- DEFECT000633962
-- Symptom: The OID bgp4V2PeerAdminStatus does not return the
correct value
-- Reported: NI 05.7.00
-- Resolved: NI 05.8.00g
- DEFECT000583319
-- Symptom: SNMP polling on bgp4V2PeerTable (OID brcdIp.3.5.1.1.2)
does not display all the BGP entries
-- Reported: NI 05.6.00
-- Resolved: NI 05.8.00e
- DEFECT000550309
-- Symptom: SNMP polling on bgp4V2PeerTable (OID brcdIp.3.5.1.1.2)
does not display the full information
-- Reported: NI 05.7.00
-- Resolved: NI 05.8.00c
* Add ironware CER & ICX platform test data.
* Re-add ironware.json compatible with current master branch.
* Add bad_ifoperstatus for filtering interfaces having a status for example notPresent
* Add bad_ifoperstatus for filtering interfaces having a status for example notPresent
* Add bad_ifoperstatus for filtering interfaces having a status for example notPresent
additional translatable strings: Filter Settings in settings page and Global Search on all pages.
remove duplicate fr key
also, language file signatures were wrong as I had a testing version of the vue generator
* Unbundle javascript language files
automatically generated for each install
* update docs
* update laravel-vue-i18n-generator
a newer (unreleased) verison is need for English fallback to work
* initial db/defaults dump
* numeric values
* Remove $config['time']
* Use config_definitions.json
* try setting definition as a complete array
* a little more
* fix format
* WIP converting dynamic setting pages
* rewriting the webui
* remove legacy and add translations
* finish email section
* improve navigation
update js a bit
* Import the remaining existing settings
* Update backend still some wip
migration
* fix config loading (db not overriding defaults)
* some cleanup
* more array collapsing
* update settings
* Settings search
* add purge settings to ui, order groups and sections
* collapse more arrays
* Auth definitions WIP
* remove needless slash escapes
* add warning to json
* moving settings from defaults.inc
* remove slow_statistics
* Move rrdtool settings to the poller section
* Use translations more consistently
* removing more settings from defaults.inc.php
* show setting name in tooltip
* allow help text to be shown on mobile
* disable settings that are set in config.php
* Implement undo and reset to default.
* Vue.js functional
* Vue.js WIP
* Implement tabs component
* accordion WIP
* lodash ver update
* two items
* Accordion somewhat working
* hash navigation
* Refine Accordion
* Fix up tab styling a bit
* Cleaner tab selected property
Hide html while loading
* spinner?
* Icon support
property for accordion to active
* WIP
* Tabs/Sections from ajax
* Setting Component skeletons
* Dynamic Component resolution
* Basic functionality
* toggle class
* Refactor components
* translate tabs and accordions
* simple array attempt
* improve readonly tooltip
* array styling
* array value editing
* organize snmp info
* Handle initial tab/section in url
* Use Laravel to parse tab/section, dump old
* Draggable array entries
* v-tooltip, for clickable (and touch) help tooltips
disable draggable
* Navigation WIP
* Navigation WIP
* groups computed
* filter settings
* fix event reference
* vue.js i18n initial
* missing description = just setting name
* en fallback
* tidy up the language support and js generation
* persist value to db
* fix issue with 0
* Delete settings from DB instead of setting them to default
* ldap-groups
fixup style
* Default dashboard selection
* fix array of options instead of object
* allow custom validation for settings
* translate options in SettingSelect
* SNMP v3 WIP
* fix setting arrays
* Split persist out of set
* Hook up events for SNMP v3 Auth
correct Config::persist behaviour with arrays
* dependent settings (primitive for now)
actually update the settings values in the LibrenmsSettings component
* more complex "when" behaviour
* remove un-needed seeder
* add poller_modules.cisco-qfp
* remove en.json (disable warning)
* don't set default for log_dir or log_file, otherwise it won't be processed correctly
* Fix module order
add some missing settings
* more config corrections
* correct graphs
correct loading values set to null (although it should have no difference)
remove project_name_version
* Add nfsen settings. Docs are very confusing, so might have flubbed something
remove option for array definition of select option as numeric indexes messes it up
* Correct more upstream config differences
* Config cleanup after a bunch of merges.
* Fixes
* add version tags to js/css files
remove old js
* Print out full settings list read-only
* Add http_proxy setting
fix indents in config_definitions.json
* repeaters default is 0 (aka 20)
* cleanups
* rewrite the dynamic config docs
* add language docs
* Don't show snmp v3 auth add/remove if disabled by config.php
