* Extend processor polling to Dell Powerconnect N1100 and N1500 series
* SNMP test data for Dell Powerconnect N1124T-ON
* SNMP test data for Dell Powerconnect N1148T-ON
* SNMP test data for Dell Powerconnect N1524P
* Update Airos.php to match with Airos 8.x.x
Oid changed from AirMaxQuality (not used anymore), to Airtime
* Update Airos.php
* update airos.php to use wirelessUtilization
Using OID for UBNT-AirMMAX-MIB::ubntAirMaxAirtime.1 for wireless sensor utilization.
* Removed Airtime from quality
* Tests
* Update airos.json
* airos.snmprec reverted to previous state, and uploaded airos_airos8.snmprec
* Added airos8 snmprec
* Create airos_airos8.json
* Update airos.json
Co-authored-by: Tony Murray <[email protected]>
* Remove unused routes
Prevents route:cache from working also
* Run artisan optimize after composer install
Helps cleaning up issues with upgrades, and also makes laravel a bit
faster
* Update composer.json
Co-authored-by: Tony Murray <[email protected]>
* Implement OS specific information discovery
That way it doesn't have to be fetched during polling
Also improve discovery process, os is only detected once, in the core module.
EXA is the test os, a couple improvements there.
* Use local variable, then unset it so we don't pollute.
* fix style issues
* test and other fixes
* attribute update fixes
* Update exa data, need new source data
* null missing "os" values
* fix ftos odd character
* fix ftos odd character
* only null for new style or we will reset to null every discovery
* Move device observer to own class
* Handle location, relocate event logging
* update exa e7-2 data
* update ird test data, apparently unicode is now working.
* update Linux ntc, now uses correct icon
* Only load all os on the web, also, we can't load existing the the database isn't connected.
* only for devices that have a location
* revert ftos test data apparently
* revert ird
* Test WIP
* WIP
* port getComponents to Eloquent
* port more
* simpler creation
* change to explicit arrays
* add missed file
* restore commented code
* fix inserting null value for component prefs
* Fix some bugs in setCompenentPrefs
Can't create tests without fixing bugs first :D
* another test
* another test
* Modernize setComponentPrefs
* Test for event log entries
* Fix delete event
* fix invalid values for component toggles
* status log too
* Use Setters to work around bad data, $casts doesn't do what we want.
* New OS: QTECH
https://www.qtech.ru/en/catalog/
* QTECH: Add hardware, version and serial support
* QTECH: Fix platform and software version detection
* QTECH: Add test for QSW-3450
Fixes issues observed in LibreNMS (timeouts, missing data)
Manual snmpwalk vs. snmpbulkwalk confirmed no bulk support
Missing toner, network, etc. information now seen in LibreNMS!
* MPLS updates and bugfixing
* Tests
* tests
* code climate, tests
* tests
* tests
* remove nokiaIfName(), fetch ifName from the database instead
* restore from messed rebase
* tests
* btw, fix travis about the missing docs
* tests
* tests
* clean the messed up test data an generate new for timos
* rebase
* SIAE add additional sensors and data
Improved labels
Modulation
Rate
Serial Number
Hardware name
* Add total rates
* was supposed to be divisor
* Short array syntax
* Support FreeNAS/TrueNAS 11.3
Seems the latest release changes the SysObjectID from FreeBSD to
their own enterprise number.
I've left the old FreeBSD enterprise number in place, so both
older and newer releases will be detected.
* Test data
It's also possible to do zpool IO from the MIB, but diskIO on
LibreNMS makes a lot of assumptions about it coming from the UCD
MIB.
This changeset adds detection for FreeNAS and TrueNAS - despite
having their own enterprise number, the snmpd uses the FreeBSD
one.
The naming is a bit all over the place, because this reflects
reality - IXSystems produce FreeNAS and TrueNAS, the product lines
have merged to eliminate FreeNAS, but TrueNAS still calls itself
FreeNAS everywhere except the GUI.
* opengear MemPools
Discovery and Polling of opengear mempools - opengear Detail Memory Usage is already collected however that can not be used to trigger rules.
* add test
opengear mempools tests
* remove newline
* Added sensors for outlets on Schleifenbauer devices. Also use the outlet name when configured.
* Updated tests for Schleifenbauer
* Fixed on test for Schleifenbauer
* Optimized polling by retriving only outlets from the device with the network connection, not all devices on the data-bus.
* Fixed code styling
* Use shorthand comparisons for names
* Fix for conflicting $entPhysicalIndex
* Add OS detection for Greenbone appliances
They don't expose anything fancy over SNMP, but this makes them
display interface names correctly. Under the hood they're unix-y.
Greenbone logo is from the AGPLv3 gsa, which is GPL compatible:
https://github.com/greenbone/gsa/blob/master/gsa/public/img/greenbone.svg
The mib is included for completeness, but it doesn't expose any
graphable values.
* Fix the vendor's logo
* BGP Polling: Add error code polling
* Rework describe_bgp_error_code and fix bgp error fields migration
* Add real test data for IOS-XR and Arista EOS
* OS detection and sensors for Dell Compellent
... or Dell storage as it is now known. Under the hood it's
referred to as Compellent, so I've named it as that to avoid
confusion.
It is not part of the Dell group or using the Dell MIB folder -
Dell have doubled up on some OID definitions, which means the MIB
here and a couple of the existing ones conflict.
The change adds OS detection and a frankly ludicrous amount of
sensors. I have access to a relatively low end device, so at the
moment everything under *ctlr* is my best guess based on the other
table layouts.
* Set sensor state_name to avoid collisions
* Regenerate test data
* Sev and Rel terminology varies between devices
* Most temp sensors don't have low limits, so adding
* update test data
Co-authored-by: Tony Murray <[email protected]>
* Fix routing engine discovery on standalone JunOS devices
In #9426, the sensor discover code was replaced with YAML.
Unfortunately it treats the FRU table as standalone OIDs, and did not
implement the filtering that was present in the original code.
This change causes LibreNMS to fully walk the FRU table, which allows us
to silence alerting on devices with an 'unknown' status. Without this
change, standalone devices have a spurious routing engine with state 1,
which triggers false harware failure alerts.
As we're changing the name of the sensors, this causes a loss of sensor
history.
This has been brought up on community a couple of times:
https://community.librenms.org/t/juniper-qfx-routing-engine-state-alert/6152https://community.librenms.org/t/spurious-failed-routing-engine-from-some-junos-devices/6208
* Update test data
* Update test data
* Update test data
* Update test data
* This syntax works, but fails linting
* Create addhostCliTest.php
Added test for addhost.php cli tool
* Added test for addhost function
Added tests and fixed code in order for the function to be able to run with default parameter
* Create addhostTest.php
added tests for addhost function
* Update addhostCliTest.php
Changed from testing addhost.php to Artisan command 'device:add'
* remove delhost exec
* remove delhost
* Remove isn't needed, transactions are used.
* Remove unneeded, transactions are used.
Co-authored-by: Tony Murray <[email protected]>
* Add Advantech logo.
Taken from https://commons.wikimedia.org/wiki/File:Advantech_logo.svg
with minor edits (removed width and height).
* Add Advantech MIB files.
* Add Advantech definitions.
* Add suppor for version and hardware polling.
* Add advantech snmp recording.
* Add sensors for SFP ports
Each SFP will have temperature, voltage, tx bias, Tx/Rx power.
Also update snmp recording to include new data.
* Rename ADVANTECH-EKI-PRONEER-MIB_1_01.mib to ADVANTECH-EKI-PRONEER-MIB
* Rename advantech-common-mib.mib to ADVANTECH-COMMON-MIB
* Update advantech.yaml
* Update advantech.svg
* Create advantech.json
Co-authored-by: PipoCanaja <[email protected]>
* Added support for ICT Modular Power System and ICT Sine Wave Inverter
* Added SNMP test data for ICT Modular Power System and ICT Sine Wave Inverter
* Fixed styling errors and refactored state sensor for ICT Sine Wave Inverter
* Fixed newly created styling issues from refactoring ICT Sine Wave Inverter files.
* Fixed further styling errors from previous changed to appease Travis CI
* Removed unnecessary math from ICT Sine Wave Inverter voltage sensor
* Cleaned up unnecessary lines in ict-mps/ict-swi sensors. Moved from snmp_get to snmp_get_multi in ict-mps/ict-swi os pollers.
* Added test data for ICT MPS and SWI
* Fixed issue with load sensor not discovering
* Update snmpget to snmp_get
Co-Authored-By: Jellyfrog <[email protected]>
* Updated test data post-fixing sensor detection issue on ICT Sine Wave Inverters
* Moved ict-swi and ict-mps from legacy to yaml sensors
* Removed legacy code for ict-mps and ict-swi sensors
* Last commit mistakenly removed OS polling from ict-mps and ict-swi
* Fixed formatting for OS polling and updated test data for ict-mps and ict-swi
Co-authored-by: Jellyfrog <[email protected]>
* ipv6 support for BGP routes in VRP devices
* reverse bgpPeers array to allow VRF aware BGP
* codeclimate
* codeclimate
* codeclimate, finally
* Split VRP out of bgp-peers for readabilty
* Split VRP out of bgp-peers for readabilty
* tests
* CodeClimate
* improve function description
* improve function description
* v6data
* rebase
* space
* ipv6 support for BGP routes in VRP devices
* reverse bgpPeers array to allow VRF aware BGP
* codeclimate
* codeclimate
* codeclimate, finally
* Split VRP out of bgp-peers for readabilty
* Split VRP out of bgp-peers for readabilty
* tests
* CodeClimate
* improve function description
* improve function description
* v6data
* rebase
* space
* fixed corner case
* ascom support
* tests
* typo
* Correct missing 'mpls' in misc/os_schema.json
* remove mpls for now
* tests
* Update ascom.svg
* Don't disable already disabled modules
As I usually state, not much gain in disabling these here. Would be better to optimize the modules if you think they take too long on devices that don't have support.
* refactor polling code
Co-authored-by: Tony Murray <[email protected]>
* added functionality to set sysLocation override in $os.inc.php files
* php styling fixes
* updated docs for location override in $os.inc.php
* patch poweralert.inc.php to use $location override
* added location override for enexus (Eltek)
* update phpdoc for set_device_location()
* converged location code in core.inc.php to use set_device_location()
* added new snmprec test data for enexus os
* Travis test data
* remove enexus_smartpacks2 test data
* Revert "remove enexus_smartpacks2 test data"
This reverts commit 36c8fc7036.
* updated enexus_smartpacks2 test data with generic syslocation
* kick travis CI
* kick travis CI
KingJ
PipoCanaja
Facundo Caselles
Jellyfrog
Tony Murray
Alexander Moisseev
Jozef Rebjak
arrmo
Damon Reed
Vitali Kari
Adam Bishop
gonzocrazy
Jurrian van Iersel
Mathieu Poussin
robwilkes
priiduonu
Wheel
mathieu-oui
Lars Elgtvedt Susaas
RobJE
Mikkel Mondrup Kristensen
James French
Noah Roufus
Heath Barnhart
Martin22
Hayden
