* Add Advantech logo.
Taken from https://commons.wikimedia.org/wiki/File:Advantech_logo.svg
with minor edits (removed width and height).
* Add Advantech MIB files.
* Add Advantech definitions.
* Add suppor for version and hardware polling.
* Add advantech snmp recording.
* Add sensors for SFP ports
Each SFP will have temperature, voltage, tx bias, Tx/Rx power.
Also update snmp recording to include new data.
* Rename ADVANTECH-EKI-PRONEER-MIB_1_01.mib to ADVANTECH-EKI-PRONEER-MIB
* Rename advantech-common-mib.mib to ADVANTECH-COMMON-MIB
* Update advantech.yaml
* Update advantech.svg
* Create advantech.json
Co-authored-by: PipoCanaja <38363551+PipoCanaja@users.noreply.github.com>
* Added support for ICT Modular Power System and ICT Sine Wave Inverter
* Added SNMP test data for ICT Modular Power System and ICT Sine Wave Inverter
* Fixed styling errors and refactored state sensor for ICT Sine Wave Inverter
* Fixed newly created styling issues from refactoring ICT Sine Wave Inverter files.
* Fixed further styling errors from previous changed to appease Travis CI
* Removed unnecessary math from ICT Sine Wave Inverter voltage sensor
* Cleaned up unnecessary lines in ict-mps/ict-swi sensors. Moved from snmp_get to snmp_get_multi in ict-mps/ict-swi os pollers.
* Added test data for ICT MPS and SWI
* Fixed issue with load sensor not discovering
* Update snmpget to snmp_get
Co-Authored-By: Jellyfrog <Jellyfrog@users.noreply.github.com>
* Updated test data post-fixing sensor detection issue on ICT Sine Wave Inverters
* Moved ict-swi and ict-mps from legacy to yaml sensors
* Removed legacy code for ict-mps and ict-swi sensors
* Last commit mistakenly removed OS polling from ict-mps and ict-swi
* Fixed formatting for OS polling and updated test data for ict-mps and ict-swi
Co-authored-by: Jellyfrog <Jellyfrog@users.noreply.github.com>
* honoring config option `force_ip_to_sysname` in bill creation and editing
* refactored variable name to match it in edit.inc.php
* forgot one variable
* and one more :S
* Update new_bill.inc.php
* Update edit.inc.php
* Update new_bill.inc.php
* Update edit.inc.php
* Update edit.inc.php
* Update edit.inc.php
Co-authored-by: Neil Lathwood <gh+n@laf.io>
Co-authored-by: Tony Murray <murraytony@gmail.com>
* Fix for Nokia 7705 SAR
* fix copy and paste typo
* Update 2020_01_10_075852_alter_mpls_lsp_paths_table.php
just trigger tests
* Update 2020_01_10_075852_alter_mpls_lsp_paths_table.php
* Update 2020_01_10_075852_alter_mpls_lsp_paths_table.php
Co-authored-by: Neil Lathwood <gh+n@laf.io>
* Add support for sending events to Sensu
Sensu is an alerting and monitoring service (and much more) that has a
nagios compatible check API.
This transport translates LibreNMS alerts into Sensu events, and sends
them to the agent API running on the same host as the poller.
The transport has a few options, but none of them are required - if the
Sensu agent is correctly configured, alerts will be sent as soon as the
transport is enabled.
There's a fair amount of code, as I've tried to translate as much data as
possible between LibreNMS and Sensu.
* Update Transports.md
* If alerted is 0, send an "ok" alert dated rrd.step / 2 seconds ago
This makes Sensu aware of the last time the check ran successfully (ish).
If we don't send the initial "ok", Sensu will either display 'unknown',
or an incorrectly high duration for the incident.
Alerted gets set to 1 after the first alert is sent.
We choose rrd.step / 2 as:
* rrd.step is the maximum time ago the check could have succeeded
* we halve it, so that if a check is flapping, it is not masked
Basically, we guess that the check fails around halfway through the time
since the poller last ran.
* Add additional metadata
* Improve codeclimate slightly
* Consider names that are 2 or 3 components long
* perform json_encode() on memcached app $response data to match update_application() string parameter
* return raw snmp_get result for memcached response data during update_application()
* ipv6 support for BGP routes in VRP devices
* reverse bgpPeers array to allow VRF aware BGP
* codeclimate
* codeclimate
* codeclimate, finally
* Split VRP out of bgp-peers for readabilty
* Split VRP out of bgp-peers for readabilty
* tests
* CodeClimate
* improve function description
* improve function description
* v6data
* rebase
* space
* ipv6 support for BGP routes in VRP devices
* reverse bgpPeers array to allow VRF aware BGP
* codeclimate
* codeclimate
* codeclimate, finally
* Split VRP out of bgp-peers for readabilty
* Split VRP out of bgp-peers for readabilty
* tests
* CodeClimate
* improve function description
* improve function description
* v6data
* rebase
* space
* fixed corner case
* ascom support
* tests
* typo
* Correct missing 'mpls' in misc/os_schema.json
* remove mpls for now
* tests
* Update ascom.svg
* Don't disable already disabled modules
As I usually state, not much gain in disabling these here. Would be better to optimize the modules if you think they take too long on devices that don't have support.
* refactor polling code
Co-authored-by: Tony Murray <murraytony@gmail.com>
* Fix dashboard size
Missing container
scrollbar and empty space on the right
* Can't change the width it will break existing dashboard :S
Odd that the default width 6 doesn't fit nicely into 20
* Fix device creation using overwrited ip
`deviceArray` was creating a device missing the `overwrite_ip` field, so it was not used by `isSNMPable`
* Fix device creation using overwrited ip
Part 2: Fix using not yet set variable
* Fix device creation using overwrited ip
Part 3: remove double space
* Useless commit to trigger Travis
