* rls definition
* Adding discovery
* Temp Sensor Discovery
* files for discovery
* Adding and updating MIBS
* Add snmpsim
* Modified yaml for unit test
* phpfmt format
* ci changes
* fixing temp sensor
* fix json
* db schema out of date causing bad snmpsim json
* changed temperature discovery to php
* With updated snmpsim data
* index_string restored, YAML for temperature
* style
* Fixed index_string usage in JUNOS files
* Update YamlDiscovery.php
Allow filtering on "index" in skip_values
* Move DBM to YAML as well
* style
* schema update
* Slot XX Yyyyyy
remove unwanted dot
* matching tests
* schema, round 2
* states in YAML
* put temp sensor back in yaml
* enable default poll and discovery modules
---------
Co-authored-by: PipoCanaja <38363551+PipoCanaja@users.noreply.github.com>
* OcNOS: add health sensors
Add Health Sensors
Update MIBs
Break out current sensors due to missing thresholds on _IIN sensors
* Add test data
* Wrong processors data
* Update Huawei MIBs
* Add YunShan OS definition and discovery
* Add YunShan OS snmpsim and test data
* Update discovery according to newer MIBs
* OS test data update
* OS test data update
* OS test data update
* Move sentry3 current and voltage sensors to YAML, add power to YAML, fix voltage for three-phase
* Sentry3: add systemTotalPower and systemPowerFactor
* sentry3: note that voltage and power factor are configured, not measured
* sentry3: group names to indicate sensors which are configured, rather than measured; prefix current index with infeedID to match previous PHP discovery
* sentry3: add ouprefix to outlet current to match previous PHP discovery index
* sentry3: restrict to recording voltage to only the first feed of each tower, to match previous indices
* sentry3: add snmprec from 3-phase CS-24V4-P32MA
* sentry3: attempt to fall back to Infeed
* sentry3: laravel blade fallback fix
* update tests instead of trying to fall back to old-style descriptions
* sentry3: update expected voltage in test, too
* typo
* fix test
* fix outlet OIDs ; update snmp test data with missing names ; regenerate test output
* add missing num_oids for power
* num_oid requires index, even for system-wide values
* remove unused entPhysicalIndex_measured
* tests
* tests
* doc
* entPhysicalIndex_measured must be ports OR null currently
* Should not pass tests
* tests
* back to normal
* Increase the column width of entPhysicalIndex and entPhysicalIndex_measured
* Update schema
* Remove unchanged change
* Update test data
* Remove migration and update test data
* Fix hirschmann and junos
* One too many
* Potentially incorrect usage
* Another potentially incorrect usage
* Revert changes to cisco and dell
* Test data changes for loop-telecom and ups-nut
* Update entity-sensor.inc.php
* FSW Test data
* FSW Test data JSON
* StyleCI
* Update fortiswitch.yaml - Correct state sensor index
* Update fortiswitch.yaml
* Add files via upload
* Fix sensor value at discovery
* merge templates
* fix merge issues
* fix bad merge
* adding snmprec for x11 variant
* better description for psu and vbat sensors + update overview
* oid name
* adding snmp_bulk: false back in so as to not break older hardware
* make atenpdu more specific so it does not match supermicro-bmc devices
* update x10 variant json
* updated supermicro logo and fixed data json
* updated supermicro logo
* json and snmprec got out of sync somehow
* A10 ACOS version, state and cout sensors
* A10 ACOS version, state and count sensors
* A10 ACOS version, state and count sensors
* A10 ACOS version, state and count sensors
* A10 ACOS version, state and count sensors
* A10 ACOS version, state and count sensors
* Ericsson IPOS Yaml
* Add files via upload
* Add files via upload
* Add files via upload
* Add files via upload
* Ericsson IPOS MIBs
* Ericsson IPOS - Serial & Hardware detection
* Ericsson IPOS - Remove mempool from overview
* SSR8020 SNMPrec
* Ericsson IPOS SSR 8020 Test
* Delete tests/snmpsim/ericsson-ipos_ssr8020.snmpwalk
* SSR8020 SNMPrec
* Add storage to overview
* Move to new SnmpQuery
* SnmpQuery() instead of snmp_*
* Delete mibs/ericsson directory
* Create ERICSSON-TOP-MIB
* Add files via upload
* Add Cisco HSRP State sensor support
* Cisco IOS Updated test data
* Restore ios_nac.json test data
* New ios_nac.json from a freshly reinstalled Libre!
* Cat 3560 Test
* Cat 3560 Test
* Add files via upload
* Add files via upload
* Support for new OS - CTS
* Added test data for CTS
* Added sensors support, new test data
* Fixed POETotalPower num_oid
* Removed comment
---------
Co-authored-by: OSIRIS-REx <sphinxes@protonmail.com>
* Create ARUBAWIRED-AAA-MIB
* ArubaOS-CX MIBs
* ArubaOS-CX Test data
* Add files via upload
* Add files via upload
* Add files via upload
* Add files via upload
* Add files via upload
* Style CI
* Style CI
* New test data
* Add files via upload
* Add files via upload
* Only translate the VSF sensors
* Style CI
* Update arubaos-cx.inc.php
* Add files via upload
* Initial support for webpowersmart II snmp UPS card
* missing test json
* move MIB file to separate folder
* ensure that old webpower OS does not cick in
* move MIB file to ingrasys folder
* Lancom SNMPrec
* Lancom test data
* Lancom MIBS
* Lancom discovery
* Lancom LX/SX support
* Lancom
* Style CI
* Delete tests/snmpsim/lcossx_gs3510xp.snmprec
This device returns all possible vlans as interfaces, so we get roughly 4k interfaces. This makes the test file too big (>25M). Deleting this device as test data
* Update Lcossx.php
* New Lancom logo
* Remove height/width attribute
* SVG
* Add files via upload
* Add PSU State sensor support for FortiSwitch
* FortiSwitch 424E-Fiber test data
* FortiSwitch 424E-Fiber test data
* num_oid fix
* Set graph to 0
No clue wat ' graph' parameter does, but 0 seems to be the default
* Fixed test data after num_oid fix
* Fixed test data after num_oid fix
* Test data fix after yet another fix
* Test data fix after yet another fix
* Cant seem to get test data to change state_draw_graph to 0
* ArubaOS-CX PSU & OS & serial support
- PSU state sensor support
- Add OS/software detection
- Improve serial number detection. Aruba doesn't (always) present a serialnumber on index .1. Seems to have been replaced to .101001
# snmpget -v2c -c public 192.168.178.200 -m HOST-RESOURCES-MIB -M /opt/librenms/mibs:/opt/librenms/mibs/arubaos-cx ENTITY-MIB::entPhysicalSerialNum.1 ENTITY-MIB::entPhysicalSerialNum.101001
ENTITY-MIB::entPhysicalSerialNum.1 = STRING:
ENTITY-MIB::entPhysicalSerialNum.101001 = STRING: SG30LMP0WD
# cat /root/aruba/all-oke-mib | grep 101001
ENTITY-MIB::entPhysicalDescr.101001 = STRING: 6300M 24-port SFP+ and 4-port SFP56 Switch
ENTITY-MIB::entPhysicalVendorType.101001 = OID: ARUBAWIRED-NETWORKING-OID::arubaWiredSwitchJL658A
* ArubaOS-CX 6300M test data
* ArubaOS-CX 6300M test data
* num_oid fix
* Fixing memory scale for datacom-dmos devices
Fixing memory scale for datacom-dmos devices
* Update datacom-dmos.yaml
Removing the line "index: 1" because the MIB shall provide the existent indexes.
* Uploading updated snmprec files
Uploading updated snmprec files after changing the datacom-dmos.yaml in order to fix the memory scale.
* Uploading updated json files
Uploading updated json files after changing the datacom-dmos.yaml in order to fix the memory scale.
* datacom-dmos updated snmprec files
* snmprec files
* Updated datacom-dmos test files (snmprec and json)
Updated datacom-dmos test files (snmprec and json). I had problems generating these files, so please ignore the commits without files I did earlier.
* Fix Tests
---------
Co-authored-by: PipoCanaja <38363551+PipoCanaja@users.noreply.github.com>
* Added Zhone health and reduced ports to only physical ports.
* Liniting
* Move MIBs out of folder, doesn't work
* Add testing data.
* Added test data, sorry for delay
* Added test data again
* Move MIBs to folder
* Unsupported dirrective
