* added support for PDU/PDU2 MIB data (current, power) and added external sensor fpr humidity and temperature on PDU MIB
* added test data of 1 PDU-MIB device and 1 PDU2-MIB device
* Create raritan-pdu.json
* forgot to do save-data on last commit
* Update opengear MIBs to latest version.
* Replace PHP signal discovery with YAML.
* Update Opengear YAML with new sensors.
* Add test data for Opengear.
* Add the test data json for Opengear.
* Named to numbered index to avoid data loss.
* Added support for snmp monitored PDU from fs.com
* Added support for snmp monitored PDU from fs.com
* Fix sysObjectID 1.3.6.1.4.1.30966
* Create fs-net-pdu.json
* Added support for DGD and BER that are avalible on newer infinera-groove FW
* updated tests for new groove sensors
* Update infinera-groove.inc.php
* Update infinera-groove.inc.php
* Force test to run again
* Aruba IAP: Fix Radio State Sensor
Fix state sensor for radio status from warning when disabled to unknown state.
* Update aruba-instant.json
* Update aruba-instant_105.json
* Dynamic entPhysicalIndex values for YamlDiscovery
* Use degree symbol when displaying temperature values
* Adjust SNMP options for new snmp_get_multi()
The OS polling module for mrv-od was using snmpget commands with
-Ovqs, rather than -OQUs, which meant that the equal sign was
stripped in the snmpget output. But that equal sign is now used
as the explode() delimiter so it broke the construction of the
returned array for the snmp_get_multi() function.
Additionally, I removed the NBS-CMMC-MIB:: prefix which is no
longer returned by snmp_get_multi() as part of the OID. Now,
the mrv-od.inc.php OS polling module is retrieving data from
positions in the array with actual content.
* Convert mrv-od to yaml, improve sensors discovery
Converted sensors discovery for mrv-od to yaml, retaining all
functionality for pre-cache, dbm, and temperature. Replaced specific
SFF-8472 Digital Diagnostics state sensors with generic ones, given that
we are now reading out detailed values through new dbm, current, voltage
sensors.
Reasoning: the generic Digital Diagnostics state sensors report state
diagsOk, or else the worst severity level measured among all of the
Digital Diagnostics values for that optical data point. You'd really
only want to set a generic "alarm" so the box can report that it
thinks something is wrong, whereafter a human can look at the graphs
and/or the CLI to draw their conclusions about the alarm. Otherwise,
things would quickly become too spammy as you are essentially duplicating
every sensor across both regular measurements and state measurements.
Further changes:
- Increase maximum number of detected PSUs from 4 to 8 per the MIB.
- State sensor to detect (in)sufficient power budget for all modules.
- Use skip_values to hide state sensors with the notSupported value.
- Use skip_values to hide sensors which are unsupported per the MIB,
signified by the device returning special values -1 or -2147483648.
- Add dBm, temperature "over" graphs to the mrv-od device header bar.
* Add mrv-od entity-physical support
MRV does not use the ENTITY-MIB data format, so we had to reconstruct
the inventory from their proprietary format using the following tables
from their NBS-CMMC-MIB:
- nbsCmmcChassisTable
- nbsCmmcSlotTable
- nbsCmmcPortTable
Additionally, since sensors didn't have their own ifindex in the
NBS-CMMC-MIB, I went ahead and appended the last OID digit to
the "containing" ifindex create a unique number. The same was
done for the sensors in the yaml-discovery.
* Test data for mrv-od, fix 2* pre-commit.php issues
* Fix entPhysicalIndex returning 0 instead of null
Some unit test breakage was caused by 62167ebcb which changed
the code to return 0 instead of null when {{ $index }} was
set as the entPhysicalIndex in the YamlDiscovery. So now we
detect if it returns some value which may be interpreted as
false, and if so we set null rather than 0.
* New OS: Aruba Instant
* New OS: Aruba Instant
* recreate test data
* remove aruba_instant test data
* remove empty file includes/definitions/discovery/aruba-instant.yaml
* fix state sensor discovery
* remove minor changes to includes/polling/functions.inc.phpwq
* move mac helper functions to Rewrite class
* simplify snmpwalk_group usage, general code cleanup
* fixes
* fixes
* fixes
* fixes
* fixes
* fixes
* recreate test data for 105 variant
* Add Client sensors for 8.4.0.0+
* begin stream-lining discovery and polling. separating discovery functions
* update test data
* update test data
* update test data
* improve mempool discovery/polling, clean up os polling, improve state discovery, improve os definition, misc fixes to wireless sensors module
* attempt to implement custom AP and client discovery and polling
* code fixes
* re-add ap count top graph
* more fixes
* more fixes
* more fixes
* more fixes
* remove some debugging, update test data
* code cleanup
* code cleanup
* address some scrutinizer warnings
* Fix Avtech discovery
pre-cache stored the data incorrectly
* Fix RA-4E external sensors
sen1 had incorrect oids (duplicate of sen2)
Description oid from data doesn't match the mib, perhaps outdated MIB?
* add test data
* Updated 4E MIB
* additional sensors for timos
change to yaml discovery for sensors
remove obsolete tmnxChassisPowerSupplyTable
* inconsistent data in snmpsim
* fix snmpsim data
* fix snmpsim data
* fix snmpsim data
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [X] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
After you are done testing, you can remove the changes with `./scripts/github-remove`. If there are schema changes, you can ask on discord how to revert.
* New Device: ATS - Automatic Transfer Switch
* Small fixes
* Fixed test data
* More fixes, again
* Moved temp to php to retrieve limits from device
* Fixed perms again...
* Final test file. Or I hope so...
* device: Added support for APC AP9810 zone contacts
* fix: disconnected sensors been detected. And iemConfigProbesTable certainly does get used and it reference
* fix: load is VA, not to be confused with watts. This could be different per device though...
Apparent Power unit = VA
Real Power unit = Watts
And Keeping codeclimate happy
* feature: updated APC MIB
* feature: added test data for APC Smart UPS SMX750i and AP9810 with contact switches
* The SNMP value ciscoEnvMonTemperatureThreshold is now stored as high limit (and no more as high warning limit)
* Updating misc/notifications.rss to make the user aware of the behavioral change
* Addition of missing </description> in the misc/notifications.rss
* adding paper tray status and error states
* adding paper tray test data
* Create jetdirect_papertray.json
* Store printer supply type
* Update json data
* fix style
* Dantel WebMon Support
Webmon tep discovery changes
Fix Code Climate Issues
* WebMon - Move MIB to folder and create json reference
* Minor changes to Webmon polling
* Add data scrubbing state to Synology RAID status
Adds a new state translation to Synology DSM RAID status sensor, so it displays "DataScrubbing" while the operation is running. Previously it would just show "# 13".
* Update Synology RAID MIB
Downloaded from
https://global.download.synology.com/download/Document/MIBGuide/Synology_MIB_File.zip
* refactor: advanced sensor states
mark create_state_index($state_name) as E_USER_DEPRECATED?
* fix: minor corrections
* fix: mib has partialSync(9) and incompatibleVersion(8)
* fix: corrected netagent2upsstate - Sleeping(5)
* fix: NetAgent2 upsThreePhaseUPSStatusInverterOperating correction
* refactor: array() be gone
* Refactoring includes/discovery/sensors/state/extendair.inc.php with arrays
And tidying up array formatting in other files
* fix: minor typo
* standardising array item names
removed redundant "if ($state_index_id !== null) {"
* workaround: procurve & serverscheck
a sensor is causing create_state_index($state) to return null.
The updated code doesn't allow for this and thus a hybrid is being used.
* standardised naming of state info. Caused a typo $state_name instead of $status_name
$state_name is the standard
* converted compas to square arrays
* Converted APC states using preg_match to new create_state_index() call
* Update boss.inc.php
* newdevice: Added support for Alpha Comp@s
http://www.alphainnovations.eu/compas
* fix: Updated state values
state values persist in database, even after deletion of devices.
Not a 100% how to purge them.
create_state_index($state_name, $states) doesn't update the database, if the states have changed
* refactor: comp@s OS state sensor now updated to latest format
* add mibs,first commit
* adds support for Nokia ISAM Plattform
* remove some comments
* change os polling to multi oid
* Restore file headers
* Fix discovery by sysObjectID
* first deactivate checks against IHUB (timos), It not necessary so long we can not provide more thatn one snmp community per device
* move snmp state and temperature from pre-cache
* Update os_schema.json
* update some mibs
* extend snmpwalk_cache_twopart_oid function
* add raisecom dbm and temperature sensors
* add test data
* add some more sensors
* Update raisecom.inc.php
* Update raisecom.inc.php
* Fix Sentry3 voltage sensor discovery
Previous fix broke voltage sensor discovery with superfluous .1 in the SNMP OID. I have fixed my install with this patch but other testing should probably be done.
* Update sentry3.json
* Adding Sonicwall SMA 400 support
* Added metric clients for use in SSL VPN client alerting
* Support for specifying multiple sensors for clients metric
* RAM info supported
* CPU info supported
* Added test data
* Dashes in graph aren't really useful
* Updated test data with script from upstream (#10)
* Fix style errors (#11)
* Now 8 spaces on line 56
* port clients sensor to count
Some sensor cleanups (move all icon definitions to one spot)
* update port data
* add sensor test data. Make a guess at userLicense output since it is missing.
* cleanup missed items
* typo
* Updating test data
* Fixed missing CPU info
* Recreated test data
* Recreate test data after rebase
* Test data without ignore statements in config
* Fix some comment and documentation typos.
* Fix various entphysical page display issues.
- Resolve flickering during loading (missing liClosed for nested items).
- Clicking a sensor actually takes you to the matching graph now.
* Add a few nicecase() calls to clean up html page display.
* Create discover_entity_physical() function
- Add discover_entity_physical() function into includes/discovery/functions.inc.php
- This allows for an easy implementation of OS-specific entity-physical discovery.
- Update includes/discovery/entity-physical/entity-physical.inc.php to use the new function.
* Add power_consumed and power_factor sensors.
* Two new icons, make more entPhysical data visible.
* Pre-commit fix: blank line found at end of control structure.
* Add Schleifenbauer OS support.
* Now really fix the comment typo.
* Fix parsing mistakes.
* Add a generic count sensor.
* Make the Schleifenbauer discovery use count instead of state sensors.
* Don't place count sensor at the top, add sane limits for Schleifenbauer
* Finetuning the rrd_options, changing Schleifenbauer sensor names.
* Update schleifenbauer.svg
* optimize logo too
* add test data
* fix sensor value display (spaces break it)
* update entPhysicalIndex
* Merge ethernetprobe2 into akcp and improve akcp
Use higher resolution temperature values if available
Properly hand F/C temperature scales (LibreNMS always uses C)
Add current, voltage, airflow (no test data)
Move humidity to yaml
* Update akcp.snmprec
* Update akcp-serverprobe8.json
* Add group
* Update test data
remove old MIB
Discovers 2 of 6 found in the test data then updates it to not match.
Setting the wrong oid.
Tracking two specific macs on a single AP that don't match the label.
If they roam it won't change until next discovery.
If this is wanted, it should be written in the wireless section.
hopefully doesn't break anything
Mostly issues with snmp oids and options containing spaces. Try to remove all of those.
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
After you are done testing, you can remove the changes with `./scripts/github-remove`. If there are schema changes, you can ask on discord how to revert.
* Update to Added support for HeliOS 10Ghz failover to 5Ghz state sensor
Converted /includes/discovery/sensors/state/helios.inc.php to yaml
Test units included
CLA has been signed
* Added support for CeraOS TX Mute Status state sensor, NTP Client Lock Status state sensor.
Updated CeraOS temperature sensor, now called from includes/definitions/discovery/ceraos.yaml - removed includes/discovery/sensors/temperature/ceraos.inc.php
Corrected issue with CeraOS temperature reverting to zero after polling (added a trailing . to the num_oid)
Amended includes/definitions/discovery/helios.yaml with changes as advised by Neil Lathwood and Tony Murray
* Added unit test data and corrected ceraos.yaml validation error
* Added support for Ceraos Wireless Sensors (php)
Cross Polar Interference
Wireless Frequency
Added Ceraos state sensors (yaml)
NTP Client Lock Status
Tx Mute Status
Radio Operational Status
Remote Radio Operational Status
IDU Temperature
Power Amplifier Temperature
* Fix up tests, etc
* remove helios changes, fix style
Changed the Temperature High threshold for a HPE Comware Switch to the values provided by snmp.
This means the actual threshold configured in the switch is used over any predefined/auto calculated thresholds by LibreNMS.
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
After you are done testing, you can remove the changes with `./scripts/github-remove`. If there are schema changes, you can ask on discord how to revert.
