* vrp FDB table corrected on CE switches
* sleep 5 in snmpsim to run tests.
* 6 seconds wait when snmpsim.fork is called from bootstrap
* rollback in Snmpsim Class
* Update bootstrap.php
* Fix missing PoE port graphs for Cisco Catalyst 9K
* Reworked code: 2 assignments, added tests
* Simplify code
Checking the MIBs...
CISCO-POWER-ETHERNET-EXT-MIB: AUGMENTS { pethPsePortEntry }
POWER-ETHERNET-MIB: INDEX { pethPsePortGroupIndex , pethPsePortIndex }
This means cpeExtPsePortEntry is always indexed by exactly 2 values. No point in populating slot.subslot.port
Co-authored-by: Tony Murray <[email protected]>
* Added discovery and graphing for JunOS (SRX) RPM probes
* Proposed changes for a percent based sensor type
* Fixed missing MIB declaration in JunOS YAML discovery file
* Updated Health-information.md to reflect the new percentage value type
* Added separate test data for junos_rpm type
* Update sensors.php
* Update sensors.php
* Update functions.inc.php
* test re-run
* Update junos_rpm.json
* percentage -> loss
* add ifSpeed prev test data
* mis-merge
* update sensors
* and bgp...
Co-authored-by: PipoCanaja <[email protected]>
Co-authored-by: Tony Murray <[email protected]>
* Add new sysObjectID for Arbor ArbOS TMS appliances
Arbor ArbOS TMS appliances use a sysobjectID of SNMPv2-SMI::enterprises.9694.1.5. Currently the arbos.yaml file only has 9694.1.4 so Arbor TMS appliances are not getting detected correctly as ArbOS devices.
netnms01:/opt/librenms# snmpwalk -v2c -cdeleted arbortms01.dal
SNMPv2-MIB::sysDescr.0 = STRING: Peakflow TMS 8.4 Model: TMS-HD1000 Serial: XXXXXXXXXX
SNMPv2-MIB::sysObjectID.0 = OID: SNMPv2-SMI::enterprises.9694.1.5
* New sysobjectid for Arbor ArbOS TMS appliances
* New sysobjectid for Arbor ArbOS TMS appliances
* Update arbos.json
* Create arbos_tms.snmprec
* Update arbos.snmprec
Co-authored-by: Tony Murray <[email protected]>
* Update functions.inc.php
Skip changing the high limit threshold to low limit threshold value when high limit threshold doesn't exist for a sensor. If low limit threshold value was set by discovery process or manually, the same value would be also set for high limit threshold.
* Update cisco-entity-sensor.inc.php
Skip invalid sensor threshold values, which some Cisco ASR devices (probably other families too) return.
* Add snmprec data for Cisco ASR9010
* Create iosxr_asr9010.josr
* Create iosxr_asr9010.json
* Delete iosxr_asr9010.josr
* Update iosxr_asr9010.json
* Update iosxr_asr9010.json
Co-authored-by: Tony Murray <[email protected]>
Co-authored-by: PipoCanaja <[email protected]>
* 3g-LTE WAN stats
* Get HW name on AR16x family
* serial for AR
tests
* enable snmpsim log
* Update bootstrap.php
Co-authored-by: Tony Murray <[email protected]>
* Detection for MobileIron appliances
* Test data
* Remove references for GANDI-MIB
Turns out these aren't actually needed for Linux-likes
* Remove module filters
* vrp-improve
* add bgp4 data, and get errors
* Fix WRONG Type error on bgpPeerRemoteAs + handle ErrorSubCode in a generic way
* fixing tests
* clean
* improve state backup to BGP4-MIB
* tests with corrected data
* tests
* restore original tests/data/vrp_5720.json
* Refactor pre-commit to class
* docs build
* dusk check
* ci mode for checks
* full checks
* other mysql
* make other lint checks actually work
fix pylint finding
* ci is a long opt
* fix undefined index
* dusk fully working
* ask for forgiveness, not permission
* fix whitespace
* skip dusk sometimes
* Handle 3com and other os with digits
* flags instead of if else spaghetti
* convert to command
* cleanup
* missed check
* fixes
* case
* self-check :D
* argument now
* fix bugs from refactors
* another fix
* adjust file change parsing
* refactor execut a bit
* fallback to global quiet when unknown type.
* allow quiet override for specific commands
* output cleanup
* check flow
* start of tests
* file categorizer tests and fixes
* fixes and cleanup
* skipable not implemented...
* more tests, fix bugs
* more tests and cleanup
* wrong command
* fix canCheck and set env properly
* full env fix
* don't allow dusk on user's run as it will erase their db.
* fix os option
* fix whitespace
* don't need to start server
* ci doesn't like that
* WIP Sqlite
Down methods don't work either, avoid them with refresh for now.
WIP persistent support
WIP db_schema
WIP db_schema 2
Update new migrations...
revert dump_db_schema changes for now, too much difference.
fix migrations on mysql
fix up some more items, this should be our target schema
lots of index renames and a two misc changes
index rename WIP
index rename WIP
another round
fix up new schema changes
try case insensitive fix
Trying tests WIP
fix down methods
DBSetupTest working (uses mysql)
Test sqlite migrations work
* Properly validate sqlite output
* revert glue changes, should be separate PR
* remove dusk workaround
* remove unused variables
* import
* sqlite capitalization
* Revert some refresh tests
* testing_mysql back to testing
* Intitial push working tests
* Adding unit tests
* created interface state unit tests
* started ospf nbr unit tests
* finished nbr change unit tests
* precommit checks pass
* removed uneccsarry relationship
* Handle cases where the data type is hex encoded, but the data is
not actually hex encoded.
* Test data claims 4x, but is not hex encoded
* Encode the private string
* Replace 4x|<private> with 3C707269766174653E
* Re-run save test data.
Seems some of these files might have been hand edited at some point
as fields seem out of order
* Have a trap test use a mock instead of a db query
* Ping only device doesn't display
if os was set to something, ping os wasn't loaded and we try to get overview graphs from it.
* Fix snmp_disable device page load error
When other os is set.
* Revamp os setting loading
the only safe way to access is Config::getOsSetting()
* Remove getOsSetting fallback behavior
Most instances don't use it and it can have unexpected results Config::getOsSetting('blah', 'group') == 'librenms'
* refactor and remove unneeded load_os/loadOs calls now since getOsSetting automatically loads it.
* restore unix overview graphs, they are different
small cleanups
* fix
* Extend processor polling to Dell Powerconnect N1100 and N1500 series
* SNMP test data for Dell Powerconnect N1124T-ON
* SNMP test data for Dell Powerconnect N1148T-ON
* SNMP test data for Dell Powerconnect N1524P
* Update Airos.php to match with Airos 8.x.x
Oid changed from AirMaxQuality (not used anymore), to Airtime
* Update Airos.php
* update airos.php to use wirelessUtilization
Using OID for UBNT-AirMMAX-MIB::ubntAirMaxAirtime.1 for wireless sensor utilization.
* Removed Airtime from quality
* Tests
* Update airos.json
* airos.snmprec reverted to previous state, and uploaded airos_airos8.snmprec
* Added airos8 snmprec
* Create airos_airos8.json
* Update airos.json
Co-authored-by: Tony Murray <[email protected]>
* Remove unused routes
Prevents route:cache from working also
* Run artisan optimize after composer install
Helps cleaning up issues with upgrades, and also makes laravel a bit
faster
* Update composer.json
Co-authored-by: Tony Murray <[email protected]>
* Implement OS specific information discovery
That way it doesn't have to be fetched during polling
Also improve discovery process, os is only detected once, in the core module.
EXA is the test os, a couple improvements there.
* Use local variable, then unset it so we don't pollute.
* fix style issues
* test and other fixes
* attribute update fixes
* Update exa data, need new source data
* null missing "os" values
* fix ftos odd character
* fix ftos odd character
* only null for new style or we will reset to null every discovery
* Move device observer to own class
* Handle location, relocate event logging
* update exa e7-2 data
* update ird test data, apparently unicode is now working.
* update Linux ntc, now uses correct icon
* Only load all os on the web, also, we can't load existing the the database isn't connected.
* only for devices that have a location
* revert ftos test data apparently
* revert ird
* Test WIP
* WIP
* port getComponents to Eloquent
* port more
* simpler creation
* change to explicit arrays
* add missed file
* restore commented code
* fix inserting null value for component prefs
* Fix some bugs in setCompenentPrefs
Can't create tests without fixing bugs first :D
* another test
* another test
* Modernize setComponentPrefs
* Test for event log entries
* Fix delete event
* fix invalid values for component toggles
* status log too
* Use Setters to work around bad data, $casts doesn't do what we want.
* New OS: QTECH
https://www.qtech.ru/en/catalog/
* QTECH: Add hardware, version and serial support
* QTECH: Fix platform and software version detection
* QTECH: Add test for QSW-3450
Fixes issues observed in LibreNMS (timeouts, missing data)
Manual snmpwalk vs. snmpbulkwalk confirmed no bulk support
Missing toner, network, etc. information now seen in LibreNMS!
PipoCanaja
O Palivan
Albert Siersema
Josh Baird
PelliX
Tony Murray
mattosem
JP
Bukowski
Dragan Savic
Adam Bishop
footstep86
Jellyfrog
Maikel de Boer
Heath Barnhart
Dan Baker
joseUPV
KingJ
Facundo Caselles
Alexander Moisseev
Jozef Rebjak
arrmo