* Clean broken VRF lite code
* Change DB table for route discovery
* Add VRF simple support
* add port_id to db and discovery
* static-fy the translation arrays
* sort and search cleaning
* Sorting refactor and validation
* formatItem shortened
* Handle ifIndex==0 meaning no next hop defined (MPLS)
* Sync all create/updates
* purge in daily
* remove old route table
* get rid of inetCidrRouteNextHop_device_id
* fix wonky column orders
* add route snmprec
* fix sorting by interface
* Move to new config
* rename to route the new table
* Properly display ipv6 compressed addresses
* Translation before merge ./lnms translation:generate
* Update manifest
* Add more api helper functions
to centralize code more
* Enable cors
* Initial Legacy route in Laravel
* Force api v0 responses to json
Add a couple more routes
* more paths, pretty print the json response
pass parameters to the api function
* devices basic functions
* Port generic graph function
check permissions function accepts callback to avoid lots of if statements
* move vlans
* links
* graphs
* fdb
* health
* wireless
* port graphs
* ip functions
split em up
* port_stack
* components
* compoment add/edit/delete
* get_device_groups
* port stats
* port graphs
* get_devices_by_group
* port_groups
* api_get_graph
* show_endpoints
* get_bill
* get_bill_graph
* get_bill_graphdata
* get_bill_history
* get_bill_history_graph
* remaining bill functions
* list_alerts
* ack/unmute alert
* Some cleanups
* Some cleanups
* list_alert_rules
* alert rule add/edit/delete
* inventory
* list_cbgp
* vrf
* list_ipsec
* list_fdb
* list_links (fix both usages)
* list_locations
* list_locations
* list_vlans
* list_ip_addresses
* list_arp
* list_ip_networks
* cleanup
* services
* list_logs and fix authlog.......
* cleanup
* cleanup 2
* remove slim
* don't load schema more than once
* basic test
* fix style
* downgrade laravel-cors to a version that supports PHP 7.1
* clean 1-Minute-Polling.md formatting
* cleanup formatting for Adding-a-Device.md
* clean up formatting of Cleanup-options.md
* cleanup formatting some for CLI-Tools.md
* cleanup formatting for Syslog.md and Configuration.md
* cleanup formatting for Device-Sensors.md
* cleanup formatting for Device-Troubleshooting.md
* cleanup Discovery Support.md
* cleanup Environment-Variables.md
* cleanup Example-Hardware-Setup.md and FAQ.mg
* update Features.md, Install Validation.md, Perfermance.md, Poller Support.md, and index.md
* cleanup Remote-Monitoring-VPN.md, SNMP-Configuration-Examples.md, and SSL-Configuration.md
* lots of updates for Installation docs
* more installation doc cleanup
* more formatting cleanup
* clean Work-Map.md up some
* Rewrite user management.
Error management
Revert edituser legacy page
Connect user permissions button to legacy page for now.
Implement user creation
Refine form
Remove PingCheck.php accidental add :)
Fixes for redirection and deletion
More fixes: realname accidental validation setting, hide can modify for read-only auths
Use a panel to improve style
Add icon to panel-title
Not allowed to delete own user (at least via the click of a button)
Use request validation to reduce complexity of controller.
Improve protection against users doing things they should not.
Switch to horizontal form and not nearly as wide of layout :)
delete without refresh.
Fix for buttons
Include all users (not just from this auth)
Hide the auth column if there is only one auth type
Show username if real name isn't set
Don't allow creation of demo users via the webui
a fix to the lnms user:add command, it didn't set auth_id
update edituser.inc.php to current
just redirect to users page
* Remove TwoFactorTest for now
* Update edituser.inc.php
* Update .env.dusk.testing
* Enable 2fa for 2fa test...
Update snmpd instructions for Linux to reflect the ability to use @reboot declaration in the crontab. This is probably preferable to rc.local, which is apparently not supported or possible deprecated in Ubuntu or CentOS7.
* Automatic sensor limits are now optional. Set ['discovery']['sensors']['autolimit'] = false to disable.
* Changing new config variable name from discovery.sensors.autolimit to sensors.guess_limits
* Updated documentation: ['sensors']['guess_limits'] value added
* Migration script and data feeding
* Adding the columns in the GUI
* build schema
* update FDB test data
* Use of timestamps()
* ignore created_at and updated_at in tests, and regenerate test impacted
* daily.sh does the cleaning
* space cleaning codeclimate
* Use carbon instead of str-val
* handle when $fdb_entry->updated_at and created at are null
* handle when $fdb_entry->updated_at and created at are null (force travis rerun)
* Doc update
* Doc update
* Add migrations and seeds
* Fix spacing validation issues
* Fix linting
* Update tabs to spaces
* Update daily and install process
* Make build-base.php use the new migrations if empty or at dbschema 1000.
Seed 1000 into the database.
Temp fix for the route table index length (this table basically isn't used...)
* Fix typo in seed.
Hard code legacy schema checks to version 1000 (999 would have worked as is)
* Port association table no longer exists
* Make database validate again
* DB schema, remove as many DB::statement as possible
* update migrations
add librenms cli entry point (artisan)
update validate to check laravel migrations
* remove statements from users migration
* Fix up daily.sh and the 1000 migration
* Update migrations to current state
Take advantage of environment variables to set DB credentials.
* Fix style issues
* Update schema
* fix test db collation
* Fix migration table definition
* update db migrations
* Update migrations
* Update stats callback. Just count the total migrations applied.
* Update 1000.sql.
* update migrations
* remove the graph type seeder, it is no longer needed
* update docs
* fix whitespace
* remove extra schema
* update tests
* fix sort
* add message
* dbSchema should actually be 1000
* add character set to db create
* Fix some artisan issues
* Update schema
* Graph definitions
* Stacked.
* Add display
* remove old poll-log, add redirect
* Handle undefined data in graphs
* Standard pollers
* Change doc to send to the global poller module page.
* remove test code :)
* Link parent menu
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
After you are done testing, you can remove the changes with `./scripts/github-remove`. If there are schema changes, you can ask on discord how to revert.
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
After you are done testing, you can remove the changes with `./scripts/github-remove`. If there are schema changes, you can ask on discord how to revert.
* Force root url if set by user
If user sets APP_URL, force the root url to that. Empty strings result in default behavior.
Fix some of the urls in the laravel templates.
* Docs update
* Add base_url
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [ ] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
After you are done testing, you can remove the changes with `./scripts/github-remove`. If there are schema changes, you can ask on discord how to revert.
* Allow trusted proxy via APP_TRUSTED_PROXIES
Set to '*' by default to emulate legacy behavior.
Set up doc describing environment variables
* Create helper to parse environment variables into arrays properly.
* Update doc blocks
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [X] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
This pull req adds support for Rancid GIT backend (instead of the current supported SVN).
Not only git is preferred these days, also php-svn is non-existing on php 7+, so the only Rancid option is broken on PHP 7+, so might be nice to have this included :)
* feature: Added dynamic graphs with RrdGraphJS by oetiker (https://github.com/oetiker/RrdGraphJS)
* fixed DragCursor.cur
* refactoring, only js when needed
* doc: added use of dynamic graphs switch in Configuration.md
* Updated to use Config, schema + example gif
* Rename 261.sql to 262.sql
Added more information on how to setup collectd. Noted that the rrd location set in config.php needs to match /etc/collectd.conf and /etc/collectd.d/rrdtool.conf.
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
Just followed the docs after installation and stumbled about this, which caused some irritation.
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [ ] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
