* Migrate ironware sensor discovery from php to yaml.
* More sensors, add grouping.
* dynamic_discovery_get_value() becomes getValueFromData()
* Target a specific index with skip_values.
* Improve Brocade BGP session discovery/polling
This commit allows for the correct discovery of BGP sessions
with 32-bit ASNs, IPv6 neighbors using the BGP4V2-MIB which is
based on draft-ietf-idr-bgp4-mibv2-11 and also polls for IPv4
unicast received routes through the FOUNDRY-SN-BGP4-GROUP-MIB.
Copied most of the code from PR#8877 by @Mikeburke14, cleaned
up the code a little bit to match the normal LibreNMS style,
and fixed bgpPeers_cbgp discovery as well as polling for the
ipv4.unicast neighbors.
Note that older Brocade IronWare firmware versions are known
to have multiple defects relating to the BGP4V2-MIB which
might result in certain missing non-established neighbors.
Related vendor defect numbers:
- DEFECT000633962
-- Symptom: The OID bgp4V2PeerAdminStatus does not return the
correct value
-- Reported: NI 05.7.00
-- Resolved: NI 05.8.00g
- DEFECT000583319
-- Symptom: SNMP polling on bgp4V2PeerTable (OID brcdIp.3.5.1.1.2)
does not display all the BGP entries
-- Reported: NI 05.6.00
-- Resolved: NI 05.8.00e
- DEFECT000550309
-- Symptom: SNMP polling on bgp4V2PeerTable (OID brcdIp.3.5.1.1.2)
does not display the full information
-- Reported: NI 05.7.00
-- Resolved: NI 05.8.00c
* Add ironware CER & ICX platform test data.
* Re-add ironware.json compatible with current master branch.
* accessing in YAML each part of the index in case oid has more than one
* accessing in YAML each part of the index in case oid has more than one
* accessing in YAML each part of the index in case oid has more than one
* accessing in YAML each part of the index in case oid has more than one
* accessing in YAML each part of the index in case oid has more than one
* accessing in YAML each part of the index in case oid has more than one
* accessing in YAML each part of the index in case oid has more than one
* Codeclimate
* Initialisation + comments
* Like this
hopefully doesn't break anything
Mostly issues with snmp oids and options containing spaces. Try to remove all of those.
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
After you are done testing, you can remove the changes with `./scripts/github-remove`. If there are schema changes, you can ask on discord how to revert.
Hi,
As far as I understand the code, it seems that array_reduce should be array_replace in this line, isn't it ?
PipoCanaja
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [X] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
After you are done testing, you can remove the changes with `./scripts/github-remove`. If there are schema changes, you can ask on discord how to revert.
* Use of dynamic_discovery_get_value in can_skip_sensor in order to use all available oids in skip_values
* Use LibreNMS\Device\YamlDiscovery code instead of keeping duplicated function can_skip_sensor
* Fix Travis errors
* Extract DiscoveryItem and move some things to better places.
Extract model class
Fix up model construction. I have problem with construction...
Makeshift model working. Switch constructor to factory. discover() and create()
Support legacy discovery.
Remove uneeded custom pollers
Remove netonix custom detection as we try ucd on all os now.
Add a few yaml procs. Fix a couple things.
More processor discovery conversions
Move Calix e7 to standard hrProcessorLoad, but it doesn't fully implement the HR-MIB, move things around to make it work.
Add a few yaml procs. Fix a couple things. Correct some stupid mib stuff.
Move more, drop php 5.3
Add netscaler which uses string indexes. Port fiberhome to yaml and use skip_values
More conversions. BroadcomProcessorUsage Trait
Serveriron and Ironware share some mibs. Create a common abstract os for them.
Add yaml support for mib specification in each data entry
Make legacy discover_processor() set 0 for hrDeviceIndex
Untangle Dell switch OS processors
Use use shared OS for groups if they don't have a specific group.
fix silly mib mistake
Make index optional
Move HR and UCD to Traits and out of Processor.
* forgot to update the fortiswitch index
* Make sgos and avaya-ers match the old index.
* fix comware test data
* fix merge errors
* fix dsm and remove pointless empty modules
* file not found exception is in the wrong place.
* Updated processor development docs
